ISCSI LUN after reboot
Hello all,
I configured a target on a Sun T5220 to connect to an Equallogic storage device. The ISCSI connection works and the drive is presented via format. I can reboot and the ISCSI remains after a reboot. However if I format the drive using ZFS and reboot the ZFS filesystem does not remount. I tried creating an service remount the ISCSI drive which is documented from Oracle but no luck. Any ideas?
Thanks.
yes this was working just fine prior to vmware patch updates. I dont think vmware patches would have anything to do with the boot from san to the nimble.
Still cannot boot. IQN looks fine
from iscsi_get_config
I see this error
ISCSI_TARGET_LOGIN_ERROR
IQN matches up with the one in nimble
IQN: iqn.2007-11.com.nimblestorage:esx1-bootvolv53e2c6e4ade1c307.00000032.fe0305e3
check the initiator group on nimble and the IQNs have full access to this bootvol
iqn.2015-01.com.cisco:1000:ESXi:2
iqn.2015-01.com.cisco:1000:ESXi:3
Similar Messages
-
After delete iSCSI LUN vacant space does not become available
px12-400r, one pool on RAID10 (5,42TB).
Pool divided into 4 iSCSI LUN (2TB+2TB+1TB+0,42TB).
After deleteting one of them (on 2TB), this vacant space in tab "System Status" (over Web Interface) shown in the diagram as the free and "Amount of available space" on Status Bar 2TB (on Device Home Page over Web Interface),
but in tab "Disk Management" shows "Allocated/Available" - "5,42TB/0B" , and new volume or iSCSI LUN can not be added ("In any storage pool does not have enough space to add an iSCSI drive"
Storage in AD. Deleting iSCSI LUN over Web Interface under AD user with storage admin rights.
Rebooting storage did not help. What to do? How to return control of this free disk space?Hello gusev67
To be certain that the iSCSI LUN was actually delete, please try this alternate method to check if the LUN is present and if so, deleted.
Go to Drive Management and click on the "volumes" section of your storage pool
Navigate to the iSCSI LUN that should have been deleted/removed
If it is present there, please click on the iSCSI LUN name to show the iSCSI information overview for the LUN, there click on the "delete" option.
If that does not seem to resolve the issue I recommend contacting LenovoEMC support regarding the problem.
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/ -
Add iSCSI LUN to Multiple Hyper-V Cluster Hosts?
Is there a way to connect multiple Hyper-V hosts to a CSV LUN without manually logging into each and opening the iSCSI Initiator GUI?
Is there a way to connect multiple Hyper-V hosts to a CSV LUN without manually logging into each and opening the iSCSI Initiator GUI?
Here's a good step-by-step guide on how to do everything you want using just PowerShell. Please see:
Configuring iSCSI storage for a Hyper-V Cluster
http://www.hypervrockstar.com/qs-buildingahypervcluster_part3/
This part is should be of a particular interest of yours. See:
Connect Nodes to iSCSI Target
Once the target is created and configured, we need to attach the iSCSI initiator in each node to the storage. We will use MPIO to
ensure best performance and availability of storage. When we enable the MS
DSM to claim all iSCSI LUNs we must reboot the node for the setting to take affect. MPIO is utilized by creating a persistent connection to the target for each data NIC on the target server and from all iSCSI initiator NICs on our hyper-v
server. Because our hyper-v servers are using converged networking, we only have 1 iSCSI NIC. In our example resiliency is provided by the LBFO team we created in the last video.
PowerShell Commands
1
2
3
4
5
6
7
8
9
Set-Service -Name
msiscsi -StartupType Automatic
Start-Service msiscsi
#reboot requres after claim
Enable-MSDSMAutomaticClaim -BusType
iSCSI
Set-MSDSMGlobalDefaultLoadBalancePolicy
-Policy RR
New-IscsiTargetPortal –TargetPortalAddress 192.168.1.107
$target = Get-IscsiTarget
-NodeAddress *HyperVCluster*
$target| Connect-IscsiTarget
-IsPersistent $true -IsMultipathEnabled
$true -InitiatorPortalAddress
192.168.1.21 -TargetPortalAddress 10.0.1.10
$target| Connect-IscsiTarget-IsPersistent$true-IsMultipathEnabled$
You'll find a reference to "Connect-IscsiTarget" PowerShell cmdlet here:
Connect-IscsiTarget
https://technet.microsoft.com/en-us/library/hh826098.aspx
Set of samples on how to control MSFT iSCSI initiator with PowerShell could be found here:
Managing iSCSI Initiator with PowerShell
http://blogs.msdn.com/b/san/archive/2012/07/31/managing-iscsi-initiator-connections-with-windows-powershell-on-windows-server-2012.aspx
Good luck and happy clustering :)
StarWind Virtual SAN clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts. -
Express does not reconnect after reboot of Extreme
My extreme is conencted (via ethernet) to my router (bridge mode)
My Express is connected to Extreme to expand wireless network (bridge mode)
However when i reboot the extreme, the Express is no longer visible
I have to reboot as well. is this normal?
Also, logically (as per above config) the extreme & express are part of ONE wireless network
So a device conected will "roam" between the 2 as if it's only 1 wifi point (?)
However when i connect a wireless security camera, it shows me express & extreme seperately (eventhough same name & login)
and I have to choose to which one to connect.
IThis means if it's connected to Express & Express stops working, then
it will NOT got directly to the extreme (eventhough it's well in range)
Plsd to hear
EgonHi,
Firstly, please make sure your Microsoft iSCSI Initiator Service is set to Automatic start.
Seccondly, I found another thread that had similar problem with yours, you can take its sloution as reference.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/ff26e741-0e2d-47f9-9132-859750ef1514/windows-2008-iscsi-does-not-automatically-connect-to-targets-after-reboot?forum=winserverClustering
In addition, please refer to the blog below for more reference to set ISCSI connect automatically after system reboot.
Managing iSCSI Initiator connections with Windows PowerShell on Windows Server 2012:
http://blogs.msdn.com/b/san/archive/2012/07/31/managing-iscsi-initiator-connections-with-windows-powershell-on-windows-server-2012.aspx
Roger Lu
TechNet Community Support -
Using iscsi luns as vdiskserverdevices
Hi
I am new to LDoms and was wondering if anyone has any experience of using iscsi luns (presented by zfs volumes on an X4500) as vdiskserverdevices . In my case the iscsi luns were presented to the service domain (in this case the control domain) and were correctly visible and accessible from it. However when presented as vdisks to the guest domains, for use as the root disk, the guest domains could not access/see the disks. When the guest domain was booted for a jumpstart install one of the first messages was that it couldn't access the vdisks and this was confirmed during the install process when a boot disk couldn't be found. AFAIK solaris can't boot of iscsi luns (without iscsi HBA's) but I figured that hiding the iscsi lun behind the vdiskserver would work -but no such luck. Any advice on whether this is possible would be most welcome.
As an unwanted work-around I created a couple of large files (aprox 420 Gb and 920Gb) and presented these instead as the vdsdevs. This time the smaller 420Gb couldn't be seen at all by the guest domain while the larger file showed up as a SUN 920Gb type disk though while partitioning it, it only showed about 100Gb as the disk size. Any pointers as to what I'm doing wrong here is also most welcome.
My hardware consists of 2* T5220 running Sol10 08/07 with latest recommended patches and firmware and an X4500 which is being used to provide all (root and data) storage for the guest domains.
Thanks
SauravHi there,
I am setting up a platform when the guest domains are installed into iSCSI LUNS and it is working fine.
I am using LUN's expported from a NetApp rather than using ZFS but that shouldn't matter. They appear like this on my test platform:
root@solarisvh # iscsiadm list target -S
Target: iqn.1992-08.com.netapp:sn.********
Alias: -
TPGT: 2000
ISID: 4000002a0000
Connections: 1
LUN: 0
Vendor: NETAPP
Product: LUN
OS Device Name: /dev/rdsk/c4t0d0s2And I can add it into a guest domain by running:
ldm add-vdsdev /dev/rdsk/c4t0d0s2 examplevol1@primary-vds0I found that I had to pop in an label the disk (using format) on the first use for it to be picked up but after that it worked fine and I could boot up and install an OS into the LUN.
Josh -
LDOM in iSCSI LUN - iSCSI logging in too early
Hi there,
I am having a very strange problem. I'll describe my setup first.
The hardware hosting the LDOM environment does not have enough local disk space to support the number of required domains so to get around this problem the disks used by the configuration are, in fact, iSCSI LUNS mounted from a Netapp.
This works fine once they are up and running, but I am having problems when the host server is rebooted because the services do not seem to be starting in a sensible order. If you look at the dmesg output at [http://www.joshberry.plus.com/dmesg.txt|http://www.joshberry.plus.com/dmesg.txt] this is the boot up sequence for the server.
You can see the iSCSI failing to log in first, with the associated errors where disks are unavailable:
Apr 30 14:55:21 fhw-dataarchive02 iscsi: [ID 286457 kern.notice] NOTICE: iscsi connection(7) unable to
connect to target iqn.1992-08.com.netapp:sn.101204418:vf.c254e0d0-1836-11dd-a621-00a0980aec76 (errno:128)Lower down in the boot sequence the reason for this becomes obvious:
Apr 30 14:55:26 fhw-dataarchive02 mac: [ID 469746 kern.info] NOTICE: e1000g1 registered
Apr 30 14:55:26 fhw-dataarchive02 e1000g: [ID 766679 kern.info] Intel(R) PRO/1000 Network Connection, Driver Ver. 5.1.8
Apr 30 14:55:26 fhw-dataarchive02 e1000g: [ID 801725 kern.info] NOTICE: pciex8086,105e - e1000g[1] : Adapter copper link is down.
Apr 30 14:55:29 fhw-dataarchive02 e1000g: [ID 801725 kern.info] NOTICE: pciex8086,105e - e1000g[1] : Adapter 1000Mbps full duplex copper link is up.Here, as far as I can see, the network is down when the LDOM is initiated and tries to get access to the iSCSI, which is never going to work.
So, firstly, have I got the right end of the stick here?
If I am on the right track my question is: can you change the order that the system initialises everything so that the network will be brought up before the guest domains are initialised.
Thanks
JoshDon't use CHAP for discovery.
Enable CHAP afterwards.
Andy -
Hi,
We are exporting bootable LUNS from a 7110 array to LDOM's on our Blades. The array was rebooted today. Since the reboot we are unable to connect to the hosts booted from the array.
I did not configure this but have the task of fixing it.....
We are running LDOM 1.2,REV=2009.06.25.09.48
So, does the LDOM boot directly from the LUN from the LDOM OBP?
The syntax in this link causes the below failure;
http://wikis.sun.com/display/OpenSolarisInfo/Configuring+iSCSI+Boot+for+SPARC+Systems
Unknown key 'iscsi-target-ip'
Unknown key 'iscsi-target-name'
Unknown key 'iscsi-lun'The ISCSI LUNS are seen by the host.
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <LSILOGIC-LogicalVolume-3000 cyl 65533 alt 2 hd 16 sec 273>
/pci@0/pci@0/pci@2/LSILogic,sas@0/sd@0,0
1. c1t2d0 <LSILOGIC-LogicalVolume-3000 cyl 65533 alt 2 hd 32 sec 279>
/pci@0/pci@0/pci@2/LSILogic,sas@0/sd@2,0
2. c3t600144F04B73EB660000000000000000d0 <SUN-SOLARIS-1 cyl 32766 alt 2 hd 4 sec 736>
/scsi_vhci/ssd@g600144f04b73eb660000000000000000
3. c3t600144F04B713A260000000000000000d0 <SUN-SOLARIS-1 cyl 32766 alt 2 hd 4 sec 736>
/scsi_vhci/ssd@g600144f04b713a260000000000000000
4. c3t600144F04B9910370000000000000000d0 <SUN-SOLARIS-1 cyl 32766 alt 2 hd 4 sec 1200>
/scsi_vhci/ssd@g600144f04b9910370000000000000000Nothing has changed on the LDOM controller domain.
I'm really stuck so any input would be appreciated.Im getting the following error as well.. Was there any solution to this please ?
Im not using any LDOM. Just on the h/w platform on T5140
{0} ok boot net Boot device: /pci@500/pci@0/pci@8/network@0 File and args:
Unknown key 'iscsi-target-ip'
Unknown key 'iscsi-target-name'
Manual Configuration: Host IP, boot server and filename must be specified
ERROR: boot-read fail
Can't open boot device
{0} ok
Edited by: 836793 on Feb 15, 2011 12:36 AM -
Lion takes 15 seconds to log in after reboot on Macbook Pro 13" (early 2011)
I have been having sluggish performance (repeated beachballs, etc.) on my Macbook Pro 13-inch (2.7 GHz Intel Core i7, 4 GB RAM), which I bought this summer pre-installed with Lion.
I didn't migrate my old system, I just installed everything on my new machine. After about 9 years of OS X upgrades on various machines, I decided to start fresh and just installed my applications and transferred the data manually. It took some time, but I wanted it lean and clean.
Within weeks though, things were starting to slow down. This morning, it took over 15 seconds after reboot before I could even log in to my user account (I clicked on the icon for my account, and after 4-5 seconds it beachballed for 10 seconds before the field for the password "slid" into place).
I've tried checking and unchecking having Lion restore my previous session before rebooting; closing all applications before restarting; not closing applications before restarting. But consistently, right after logging in for several minutes, and then after several hours of use (and/or the next day, if I put my laptop to sleep instead of shutting it down) opening, saving documents, viewing mailboxes after opening Mail, or even viewing folder contents in the Finder can take from several to 30+ seconds.
Here is the log from my most recent boot. I have Dropbox, LogMeIn, Default Folder, and Growl (the pre-App Store version), and I have Parallels (which I very rarely use), but I don't see why any of these would slow down my machine before I even log in. Besides this, I have pretty standard fair applications. I would very much appreciate any help/advice!
06/12/11 02:57:20,000 bootlog: BOOT_TIME 1323161840 0
06/12/11 02:57:35,567 UserEventAgent: starting CaptiveNetworkSupport as SystemEventAgent built Jun 13 2011 17:29:21
06/12/11 02:57:36,000 kernel: PMAP: PCID enabled
06/12/11 02:57:35,578 UserEventAgent: CertsKeychainMonitor: configuring
06/12/11 02:57:35,752 UserEventAgent: WirelessAirPortDeviceNameCopy(): no BSD interface name found for object 12551
06/12/11 02:57:35,752 UserEventAgent: CaptiveNetworkSupport:CaptiveSCCopyWiFiDevices:388 WiFi Device Name == NULL
06/12/11 02:57:36,000 kernel: Darwin Kernel Version 11.2.0: Tue Aug 9 20:54:00 PDT 2011; root:xnu-1699.24.8~1/RELEASE_X86_64
06/12/11 02:57:36,000 kernel: vm_page_bootstrap: 987432 free pages and 52952 wired pages
06/12/11 02:57:36,000 kernel: kext submap [0xffffff7f8072e000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800072e000]
06/12/11 02:57:36,000 kernel: zone leak detection enabled
06/12/11 02:57:36,000 kernel: standard timeslicing quantum is 10000 us
06/12/11 02:57:36,000 kernel: mig_table_max_displ = 73
06/12/11 02:57:36,000 kernel: TSC Deadline Timer supported and enabled
06/12/11 02:57:36,000 kernel: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
06/12/11 02:57:36,000 kernel: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
06/12/11 02:57:36,000 kernel: AppleACPICPU: ProcessorId=3 LocalApicId=1 Enabled
06/12/11 02:57:36,000 kernel: AppleACPICPU: ProcessorId=4 LocalApicId=3 Enabled
06/12/11 02:57:36,000 kernel: AppleACPICPU: ProcessorId=5 LocalApicId=255 Disabled
06/12/11 02:57:36,000 kernel: AppleACPICPU: ProcessorId=6 LocalApicId=255 Disabled
06/12/11 02:57:36,000 kernel: AppleACPICPU: ProcessorId=7 LocalApicId=255 Disabled
06/12/11 02:57:36,000 kernel: AppleACPICPU: ProcessorId=8 LocalApicId=255 Disabled
06/12/11 02:57:36,000 kernel: calling mpo_policy_init for TMSafetyNet
06/12/11 02:57:36,000 kernel: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
06/12/11 02:57:36,000 kernel: calling mpo_policy_init for Sandbox
06/12/11 02:57:36,000 kernel: Security policy loaded: Seatbelt sandbox policy (Sandbox)
06/12/11 02:57:36,000 kernel: calling mpo_policy_init for Quarantine
06/12/11 02:57:36,000 kernel: Security policy loaded: Quarantine policy (Quarantine)
06/12/11 02:57:36,000 kernel: Copyright (c) 1982, 1986, 1989, 1991, 1993
06/12/11 02:57:36,000 kernel: The Regents of the University of California. All rights reserved.
06/12/11 02:57:36,000 kernel: MAC Framework successfully initialized
06/12/11 02:57:36,000 kernel: using 16384 buffer headers and 10240 cluster IO buffer headers
06/12/11 02:57:36,000 kernel: IOAPIC: Version 0x20 Vectors 64:87
06/12/11 02:57:36,000 kernel: ACPI: System State [S0 S3 S4 S5] (S3)
06/12/11 02:57:36,000 kernel: PFM64 (36 cpu) 0xf10000000, 0xf0000000
06/12/11 02:57:36,000 kernel: [ PCI configuration begin ]
06/12/11 02:57:36,000 kernel: AppleIntelCPUPowerManagement: Turbo Ratios 0057
06/12/11 02:57:36,000 kernel: AppleIntelCPUPowerManagement: (built 21:08:10 Aug 9 2011) initialization complete
06/12/11 02:57:36,000 kernel: console relocated to 0xf10000000
06/12/11 02:57:36,000 kernel: PCI configuration changed (bridge=16 device=4 cardbus=0)
06/12/11 02:57:36,000 kernel: [ PCI configuration end, bridges 12 devices 16 ]
06/12/11 02:57:36,000 kernel: mbinit: done [64 MB total pool size, (42/21) split]
06/12/11 02:57:36,000 kernel: Pthread support ABORTS when sync kernel primitives misused
06/12/11 02:57:36,000 kernel: com.apple.AppleFSCompressionTypeZlib kmod start
06/12/11 02:57:36,000 kernel: com.apple.AppleFSCompressionTypeDataless kmod start
06/12/11 02:57:36,000 kernel: com.apple.AppleFSCompressionTypeZlib load succeeded
06/12/11 02:57:36,000 kernel: com.apple.AppleFSCompressionTypeDataless load succeeded
06/12/11 02:57:36,000 kernel: AppleIntelCPUPowerManagementClient: ready
06/12/11 02:57:36,000 kernel: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID a4b197fffe1f2470; max speed s800.
06/12/11 02:57:36,000 kernel: BTCOEXIST off
06/12/11 02:57:36,000 kernel: wl0: Broadcom BCM4331 802.11 Wireless Controller
06/12/11 02:57:36,000 kernel: 5.100.98.75
06/12/11 02:57:36,000 kernel: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
06/12/11 02:57:36,000 kernel: rooting via boot-uuid from /chosen: 96C21F61-797D-3976-A440-77523146C652
06/12/11 02:57:36,000 kernel: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
06/12/11 02:57:36,000 kernel: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/TOSHIBA MK7559GSXF Media/IOGUIDPartitionScheme/Customer@2
06/12/11 02:57:36,000 kernel: BSD root: disk0s2, major 14, minor 2
06/12/11 02:57:36,000 kernel: [IOBluetoothHCIController::setConfigState] calling registerService
06/12/11 02:57:36,000 kernel: Kernel is LP64
06/12/11 02:57:22,205 com.apple.launchd: *** launchd[1] has started up. ***
06/12/11 02:57:35,250 com.apple.launchd: (com.parallels.desktop.launchdaemon) Unknown key for boolean: HopefullyExitsFirst
06/12/11 02:57:35,250 com.apple.launchd: (com.stclairsoft.DefaultFolderXAgent) Unknown key for string: Version
06/12/11 02:57:35,250 com.apple.launchd: (com.stclairsoft.DefaultFolderXAgent) Unknown key: Version
06/12/11 02:57:38,000 kernel: BCM5701Enet: Ethernet address 3c:07:54:11:19:ea
06/12/11 02:57:38,000 kernel: AirPort_Brcm4331: Ethernet address 28:cf:da:d7:d5:9c
06/12/11 02:57:38,000 kernel: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
06/12/11 02:57:38,000 kernel: IO80211Interface::efiNVRAMPublished():
06/12/11 02:57:39,000 kernel: Previous Shutdown Cause: 5
06/12/11 02:57:39,000 kernel: DSMOS has arrived
06/12/11 02:57:39,082 airportd: _processDLILEvent: en1 attached (down)
06/12/11 02:57:40,000 kernel: Created virtif 0xffffff800ba49c00 p2p0
06/12/11 02:57:40,000 kernel: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
06/12/11 02:57:40,124 UserEventAgent: CaptiveNetworkSupport:CreateInterfaceWatchList:2788 WiFi Devices Found.
06/12/11 02:57:40,124 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
06/12/11 02:57:40,124 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
06/12/11 02:57:40,125 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
06/12/11 02:57:40,125 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
06/12/11 02:57:40,125 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
06/12/11 02:57:40,125 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
06/12/11 02:57:40,132 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
06/12/11 02:57:40,516 com.apple.SecurityServer: Session 100000 created
06/12/11 02:57:41,763 configd: bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
06/12/11 02:57:41,763 configd: DHCP en1: INIT-REBOOT transmit failed
06/12/11 02:57:41,778 configd: setting hostname to "MacBook-Pro-dAutrefois.local"
06/12/11 02:57:41,782 configd: network configuration changed.
06/12/11 02:57:41,934 mDNSResponder: mDNSResponder mDNSResponder-320.10 (Aug 2 2011 19:56:51) starting OSXVers 11
06/12/11 02:57:44,952 com.apple.SecurityServer: Entering service
06/12/11 02:57:45,892 systemkeychain: done file: /var/run/systemkeychaincheck.done
06/12/11 02:57:45,905 configd: network configuration changed.
06/12/11 02:57:45,907 configd: network configuration changed.
06/12/11 02:57:45,908 mDNSResponder: D2D_IPC: Loaded
06/12/11 02:57:45,908 mDNSResponder: D2DInitialize succeeded
06/12/11 02:57:45,910 mDNSResponder: Adding registration domain autrefois.members.mac.com.
06/12/11 02:57:46,000 kernel: nstat_lookup_entry failed: 2
06/12/11 02:57:46,000 kernel: nstat_lookup_entry failed: 2
06/12/11 02:57:46,425 com.apple.ucupdate.plist: ucupdate: Checked 1 update, no match found.
06/12/11 02:57:46,425 com.apple.pfctl: No ALTQ support in kernel
06/12/11 02:57:46,425 com.apple.pfctl: ALTQ related functions disabled
06/12/11 02:57:46,548 Parallels: Loading kernel extension prl_hypervisor.kext
06/12/11 02:57:47,000 kernel: nstat_lookup_entry failed: 2
06/12/11 02:57:47,000 kernel: nstat_lookup_entry failed: 2
06/12/11 02:57:47,000 kernel: AppleBCM5701Ethernet: 0 0 setFixedSpeed - logic error, speed any?
06/12/11 02:57:48,000 kernel: en1: 802.11d country code set to 'US'.
06/12/11 02:57:48,000 kernel: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
06/12/11 02:57:48,000 kernel: MacAuthEvent en1 Auth result for: 00:25:bc:8d:98:b5 MAC AUTH succeeded
06/12/11 02:57:48,000 kernel: wlEvent: en1 en1 Link UP
06/12/11 02:57:48,000 kernel: AirPort: Link Up on en1
06/12/11 02:57:48,000 kernel: en1: BSSID changed to 00:25:bc:8d:98:b5
06/12/11 02:57:48,423 Parallels: Loading kernel extension prl_hid_hook.kext
06/12/11 02:57:48,946 awacsd: Starting awacsd connectivity-47 (Jul 7 2011 20:52:38)
06/12/11 02:57:48,956 awacsd: Connecting AWACS client: autrefois
06/12/11 02:57:49,000 kernel: nstat_lookup_entry failed: 2
06/12/11 02:57:49,000 kernel: nstat_lookup_entry failed: 2
06/12/11 02:57:49,000 kernel: AirPort: RSN handshake complete on en1
06/12/11 02:57:49,000 kernel: /drv/ HypApic.c:230 Host APIC phy 0xFEE00000 lin 0xffffff807edde000 ver 0x15
06/12/11 02:57:49,000 kernel: /drv/ HypVtd.c:3718 [vtdInit]
06/12/11 02:57:49,000 kernel: /drv/ HypVtd.c:3734 [vtdInit] VTD initialization disabled
06/12/11 02:57:49,000 kernel: /drv/ HypLowCache.c:173 Low cache initialized (6848 kB for 8 VMs on 4096 MB)
06/12/11 02:57:49,000 kernel: /drv/ HypSMBios.c:54 Failed to find SMBios entry point
06/12/11 02:57:49,000 kernel: /drv/ HypModule.c:174 Parallels IPI irq = 0 ipi = 0(0x0)
06/12/11 02:57:49,000 kernel: /drv/ HypModule.c:181 Parallels Hypervisor 6.0.12094.676494 loaded.
06/12/11 02:57:49,241 com.apple.usbmuxd: usbmuxd-263 on Aug 23 2011 at 00:44:06, running 64 bit
06/12/11 02:57:49,422 UserEventAgent: ServermgrdRegistration cannot load config data
06/12/11 02:57:49,462 rpcsvchost: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
06/12/11 02:57:50,516 Parallels: Loading kernel extension prl_usb_connect.kext
06/12/11 02:57:51,000 kernel: /prl_hid/ Parallels HID Helper started.
06/12/11 02:57:51,314 xpchelper: for uid: 222 -- timeout while waiting on FSEvents flush; clearing cache.
06/12/11 02:57:53,488 xpchelper: for uid: 0 -- timeout while waiting on FSEvents flush; clearing cache.
06/12/11 02:57:53,662 loginwindow: Login Window Application Started
06/12/11 02:57:54,000 kernel: nstat_lookup_entry failed: 2
06/12/11 02:57:54,000 kernel: nstat_lookup_entry failed: 2
06/12/11 02:57:54,460 Parallels: Trying to load kernel extensions, exit status: 0
06/12/11 02:57:57,520 mds: (Normal) FMW: FMW 0 0
06/12/11 02:57:58,384 Parallels: Starting Parallels networking...
06/12/11 02:57:58,484 configd: network configuration changed.
06/12/11 02:57:58,500 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Probe
06/12/11 02:57:58,500 UserEventAgent: CaptiveNetworkSupport:CNSPreferencesBuildSSIDLookup:278 ssidLookup:
06/12/11 02:57:58,500 UserEventAgent: <empty>
06/12/11 02:58:11,435 mds: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
06/12/11 02:58:11,436 mds: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
06/12/11 02:58:11,496 mds: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
06/12/11 02:58:11,572 com.apple.launchd: (com.apple.netbiosd[99]) Exited abnormally: Hangup: 1
06/12/11 02:58:12,198 Parallels: Loading kernel extension prl_netbridge.kext
06/12/11 02:58:12,644 airportd: _doAutoJoin: Already associated to “Merrol's Network”. Bailing on auto-join.
06/12/11 02:58:12,652 airportd: _doAutoJoin: Already associated to “Merrol's Network”. Bailing on auto-join.
06/12/11 02:58:16,412 UserEventAgent: servermgr_certs[11] -[CertsRequestHandler(HelperAdditions) identitiesFromKeychain:]: SecItemCopyMatching (err = -25300)
06/12/11 02:58:16,414 com.apple.UserEventAgent-System: SecItemCopyMatching: L’élément spécifié est introuvable dans le trousseau.
06/12/11 02:58:16,417 UserEventAgent: servermgr_certs[11] -[CertsRequestHandler(HelperAdditions) identitiesFromKeychain:]: SecItemCopyMatching (err = -25300)
06/12/11 02:58:16,417 com.apple.UserEventAgent-System: SecItemCopyMatching: L’élément spécifié est introuvable dans le trousseau.
06/12/11 02:58:16,417 UserEventAgent: CertsKeychainMonitor: ready to process keychain & timer events
06/12/11 02:58:17,960 Parallels: Loading kernel extension prl_vnic.kext
06/12/11 02:58:18,000 kernel: com.parallels.kext.prlnet 6.0.12094.676494 has started.
06/12/11 02:58:19,946 ntpd: proto: precision = 1.000 usec
06/12/11 02:58:21,000 kernel: macx_swapon SUCCESS
06/12/11 02:58:22,652 UserEventAgent: CaptiveNetworkSupport:CaptiveStartDetect:2343 Bypassing probe on Merrol's Network because it is protected and not on the exception list
06/12/11 02:58:22,655 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Unknown
06/12/11 02:58:22,000 kernel: com.parallels.kext.vnic 6.0.12094.676494 has started.
06/12/11 02:58:22,656 configd: network configuration changed.
06/12/11 02:58:23,000 kernel: utun_ctl_connect: creating interface utun0
06/12/11 02:58:24,000 kernel: nspace-handler-set-snapshot-time: 1323161906
06/12/11 02:58:24,757 awacsd: RouteDiscovery: sendmsg error (6): Device not configured
06/12/11 02:58:25,000 kernel: utun_ctl_connect: creating interface utun0
06/12/11 02:58:25,000 kernel: utun0: attached with 0 suspended link-layer multicast membership(s)
06/12/11 02:58:26,838 loginwindow: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
06/12/11 02:58:27,206 com.apple.mtmfs: /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T//mtmfsMap64
06/12/11 02:58:27,000 kernel: nstat_lookup_entry failed: 2
06/12/11 02:58:30,892 com.apple.launchd: (com.logmein.logmeinguiagent) Unknown key for boolean: UseLMILaunchAgentFixer
06/12/11 02:58:30,895 com.apple.launchctl.LoginWindow: com.apple.findmymacmessenger: Already loaded
06/12/11 02:58:32,589 airportd: _doAutoJoin: Already associated to “Merrol's Network”. Bailing on auto-join.
06/12/11 02:58:32,791 com.apple.SecurityServer: Session 100005 created
06/12/11 02:58:32,792 loginwindow: Login Window Started Security Agent
06/12/11 02:58:33,175 SecurityAgent: Echo enabled
06/12/11 02:58:33,175 SecurityAgent: Echo enabled
06/12/11 02:58:37,449 SecurityAgent: User info context values set for autrefois
06/12/11 02:58:37,449 SecurityAgent: User info context values set for autrefois
06/12/11 02:58:38,379 authorizationhost: Failed to authenticate user <autrefois> (error: 9).
06/12/11 02:58:42,604 vpnagent: Cisco AnyConnect VPN Client Agent started, version 2.5.3041
06/12/11 02:58:42,680 vpnagent: Function: initMsgCatalog File: i18n/MsgCatalog.cpp Line: 179 Current locale: en-us
06/12/11 02:58:42,681 vpnagent: Function: loadProfiles File: ProfileMgr.cpp Line: 112 No profile is available.
06/12/11 02:58:42,682 vpnagent: Function: fileExists File: Utility/sysutils.cpp Line: 500 Invoked Function: _tstat Return Code: 2 (0x00000002) Description: unknown File: /opt/cisco/vpn/AnyConnectLocalPolicy.xml Error: No such file or directory
06/12/11 02:58:44,239 vpnagent: Current Preference Settings: CertificateStoreOverride: false CertificateStore: All ShowPreConnectMessage: false AutoConnectOnStart: false MinimizeOnConnect: true LocalLanAccess: false AutoReconnect: true AutoReconnectBehavior: DisconnectOnSuspend AutoUpdate: true ProxySettings: Native AllowLocalProxyConnections: true PPPExclusion: Disable PPPExclusionServerIP: AutomaticVPNPolicy: false TrustedNetworkPolicy: Disconnect UntrustedNetworkPolicy: Connect TrustedDNSDomains: TrustedDNSServers: AlwaysOn: false ConnectFailurePolicy: Closed AllowCaptivePortalRemediation: false CaptivePortalRemediationTimeout: 5 ApplyLastVPNLocalResourceRules: false AllowVPNDisconnect: true EnableScripting: false TerminateScriptOnNextEvent: false EnableAutomaticServerSelection: false AutoServerSelectionImprovement: 20 AutoServerSelectionSuspendTime: 4 AuthenticationTimeout: 12
06/12/11 02:58:44,617 vpnagent: Function: if_get_interfaces File: Utility/if_unix.cpp Line: 185 Invoked Function: ioctl Return Code: -1 (0xFFFFFFFF) Description: unknown (SIOCGIFDSTADDR) for interface "utun0"
06/12/11 02:58:44,617 vpnagent: Function: logInterfaces File: RouteMgr.cpp Line: 2076 Invoked Function: logInterfaces Return Code: 0 (0x00000000) Description: IP Address Interface List:
06/12/11 02:58:44,617 vpnagent: Function: readConfigParamFromFile File: vpnconfig.cpp Line: 3171 The specified configuration file for MUS service does not exist
06/12/11 02:58:44,617 vpnagent: Default route not cleared, no store
06/12/11 02:58:44,725 vpnagent: Function: if_get_interfaces File: Utility/if_unix.cpp Line: 185 Invoked Function: ioctl Return Code: -1 (0xFFFFFFFF) Description: unknown (SIOCGIFDSTADDR) for interface "utun0"
06/12/11 02:58:44,725 vpnagent: Function: applyHostConfigForNoVpn File: MainThread.cpp Line: 7570 No network interface is available, will not apply the noVPN host configuration.
06/12/11 02:58:44,725 vpnagent: Function: if_get_interfaces File: Utility/if_unix.cpp Line: 185 Invoked Function: ioctl Return Code: -1 (0xFFFFFFFF) Description: unknown (SIOCGIFDSTADDR) for interface "utun0"
06/12/11 02:58:44,793 com.logmein.logmeinguiagent: 2011-12-06 02:58:44.792 - Info - LMIGUIAgent - Main - starting...
06/12/11 02:58:44,793 com.logmein.logmeinguiagent: 2011-12-06 02:58:44.792 - Info - LMIGUIAgent - Main - started:159 uid:0 (parent:1 launchd)
06/12/11 02:58:44,793 com.logmein.logmeinguiagent: 2011-12-06 02:58:44.792 - Info - LMIGUIAgent - Main - waiting for window server connection
06/12/11 02:58:45,244 com.logmein.logmeinguiagent: 2011-12-06 02:58:45.244 - Info - LMIGUIAgent - Main - waiting for window server session
06/12/11 02:58:45,497 com.logmein.logmeinguiagent: 2011-12-06 02:58:45.496 - Info - LMIGUIAgent - Main - connecting to session manager
06/12/11 02:58:45,812 vpnagent: Function: if_get_interfaces File: Utility/if_unix.cpp Line: 185 Invoked Function: ioctl Return Code: -1 (0xFFFFFFFF) Description: unknown (SIOCGIFDSTADDR) for interface "utun0"
06/12/11 02:58:45,813 vpnagent: Function: if_get_interfaces File: Utility/if_unix.cpp Line: 185 Invoked Function: ioctl Return Code: -1 (0xFFFFFFFF) Description: unknown (SIOCGIFDSTADDR) for interface "utun0"
06/12/11 02:58:45,813 vpnagent: Function: if_get_interfaces File: Utility/if_unix.cpp Line: 185 Invoked Function: ioctl Return Code: -1 (0xFFFFFFFF) Description: unknown (SIOCGIFDSTADDR) for interface "utun0"
06/12/11 02:58:45,000 kernel: com_parallels_kext_prl_vnic: created vnic0
06/12/11 02:58:45,000 kernel: com_parallels_kext_prl_vnic: created vnic1
06/12/11 02:58:45,000 kernel: nstat_lookup_entry failed: 2
06/12/11 02:58:45,814 vpnagent: Function: if_get_interfaces File: Utility/if_unix.cpp Line: 185 Invoked Function: ioctl Return Code: -1 (0xFFFFFFFF) Description: unknown (SIOCGIFDSTADDR) for interface "utun0"
06/12/11 02:58:45,815 vpnagent: Function: if_get_interfaces File: Utility/if_unix.cpp Line: 185 Invoked Function: ioctl Return Code: -1 (0xFFFFFFFF) Description: unknown (SIOCGIFDSTADDR) for interface "utun0"
06/12/11 02:58:45,815 vpnagent: Function: if_get_interfaces File: Utility/if_unix.cpp Line: 185 Invoked Function: ioctl Return Code: -1 (0xFFFFFFFF) Description: unknown (SIOCGIFDSTADDR) for interface "utun0"
06/12/11 02:58:45,891 Parallels: Parallels networking sucessfully started
06/12/11 02:58:45,893 Parallels: Restarting CiscoVPN
06/12/11 02:58:46,093 SystemStarter: Unknown service: CiscoVPN
06/12/11 02:58:46,096 Parallels: Starting Parallels Dispatcher Service
06/12/11 02:58:46,099 Parallels: Parallels Dispatcher Server sucessfully started
06/12/11 02:58:46,944 ntpd: bind(32) AF_INET6 fe80::21c:42ff:fe00:8%9#123 flags 0x11 failed: Can't assign requested address
06/12/11 02:58:46,944 ntpd: unable to create socket on vnic0 (11) for fe80::21c:42ff:fe00:8#123
06/12/11 02:58:46,944 ntpd: bind(32) AF_INET6 fec0:0:0:fea9::1#123 flags 0x11 failed: Can't assign requested address
06/12/11 02:58:46,944 ntpd: unable to create socket on vnic0 (12) for fec0:0:0:fea9::1#123
06/12/11 02:58:46,944 ntpd: bind(33) AF_INET6 fe80::21c:42ff:fe00:9%10#123 flags 0x11 failed: Can't assign requested address
06/12/11 02:58:46,945 ntpd: unable to create socket on vnic1 (14) for fe80::21c:42ff:fe00:9#123
06/12/11 02:58:46,945 ntpd: bind(33) AF_INET6 fec0:0:0:feaa::1#123 flags 0x11 failed: Can't assign requested address
06/12/11 02:58:46,945 ntpd: unable to create socket on vnic1 (15) for fec0:0:0:feaa::1#123
06/12/11 02:58:47,155 prl_naptd: Starting Parallels Network Daemon
06/12/11 02:58:48,686 prl_naptd: vnic0: DHCP/NAT for 10.211.55.1-10.211.55.254 netmask 255.255.255.0
06/12/11 02:58:48,687 prl_naptd: vnic1: DHCP for 10.37.129.1-10.37.129.254 netmask 255.255.255.0
06/12/11 02:58:49,000 kernel: vnic0: promiscuous mode enable failed
06/12/11 02:58:49,000 kernel: vnic1: promiscuous mode enable failed
06/12/11 02:58:49,726 vpnagent: Function: if_get_interfaces File: Utility/if_unix.cpp Line: 185 Invoked Function: ioctl Return Code: -1 (0xFFFFFFFF) Description: unknown (SIOCGIFDSTADDR) for interface "utun0"
06/12/11 02:58:49,726 vpnagent: Function: applyHostConfigForNoVpn File: MainThread.cpp Line: 7570 No network interface is available, will not apply the noVPN host configuration.
06/12/11 02:58:49,726 vpnagent: Function: if_get_interfaces File: Utility/if_unix.cpp Line: 185 Invoked Function: ioctl Return Code: -1 (0xFFFFFFFF) Description: unknown (SIOCGIFDSTADDR) for interface "utun0"
06/12/11 02:58:50,000 kernel: utun_ctl_connect: creating interface utun1
06/12/11 02:58:50,000 kernel: SIOCPROTODETACH_IN6: utun1 error=6
06/12/11 02:58:51,075 com.logmein.logmeinguiagent: 2011-12-06 02:58:51.075 - Debug - LMIGUIAgent - SessionManager - SessionAgentStarted
06/12/11 02:58:51,472 com.logmein.logmeinguiagent: Cannot create socket:/var/tmp/com.logmein.LMIServer/AgentSocket errno: (61) Connection refused
06/12/11 02:58:52,843 com.logmein.logmeinguiagent: 2011-12-06 02:58:52.842 - Info - LMIGUIAgent - Main - starting...
06/12/11 02:58:52,843 com.logmein.logmeinguiagent: 2011-12-06 02:58:52.843 - Info - LMIGUIAgent - Main - started:204 uid:0 (parent:1 launchd)
06/12/11 02:58:52,843 com.logmein.logmeinguiagent: 2011-12-06 02:58:52.843 - Info - LMIGUIAgent - Main - waiting for window server connection
06/12/11 02:58:52,843 com.logmein.logmeinguiagent: 2011-12-06 02:58:52.843 - Info - LMIGUIAgent - Main - waiting for window server session
06/12/11 02:58:52,844 com.logmein.logmeinguiagent: 2011-12-06 02:58:52.843 - Info - LMIGUIAgent - Main - connecting to session manager
06/12/11 02:58:53,365 com.logmein.logmeinguiagent: 2011-12-06 02:58:53.365 - Debug - LMIGUIAgent - SessionManager - SessionAgentStarted
06/12/11 02:58:53,365 com.logmein.logmeinguiagent: Cannot create socket:/var/tmp/com.logmein.LMIServer/AgentSocket errno: (61) Connection refused
06/12/11 02:58:53,367 com.apple.launchd: (com.logmein.logmeinguiagent) Throttling respawn: Will start in 10 seconds
06/12/11 02:58:56,000 kernel: /drv/ MacDevice.cpp:608 com_parallels_hypervisor_client::powerDownHandler: message e0000340
06/12/11 02:58:56,000 kernel: /drv/ HypIoctls.c:912 Ioctl VT-d status: 0
06/12/11 02:58:58,000 kernel: /drv/ MacDevice.cpp:608 com_parallels_hypervisor_client::powerDownHandler: message e0000340
06/12/11 02:58:58,000 kernel: /drv/ MacDevice.cpp:608 com_parallels_hypervisor_client::powerDownHandler: message e0000340
06/12/11 02:58:58,000 kernel: /drv/ MacDevice.cpp:608 com_parallels_hypervisor_client::powerDownHandler: message e0000340
06/12/11 02:58:59,000 kernel: nstat_lookup_entry failed: 2
06/12/11 02:59:00,000 kernel: /drv/ MacDevice.cpp:608 com_parallels_hypervisor_client::powerDownHandler: message e0000340
06/12/11 02:59:03,388 com.logmein.logmeinguiagent: 2011-12-06 02:59:03.387 - Info - LMIGUIAgent - Main - starting...
06/12/11 02:59:03,388 com.logmein.logmeinguiagent: 2011-12-06 02:59:03.387 - Info - LMIGUIAgent - Main - started:206 uid:0 (parent:1 launchd)
06/12/11 02:59:03,388 com.logmein.logmeinguiagent: 2011-12-06 02:59:03.387 - Info - LMIGUIAgent - Main - waiting for window server connection
06/12/11 02:59:03,388 com.logmein.logmeinguiagent: 2011-12-06 02:59:03.387 - Info - LMIGUIAgent - Main - waiting for window server session
06/12/11 02:59:03,388 com.logmein.logmeinguiagent: 2011-12-06 02:59:03.388 - Info - LMIGUIAgent - Main - connecting to session manager
06/12/11 02:59:03,910 com.logmein.logmeinguiagent: 2011-12-06 02:59:03.909 - Debug - LMIGUIAgent - SessionManager - SessionAgentStarted
06/12/11 02:59:03,910 com.logmein.logmeinguiagent: Cannot create socket:/var/tmp/com.logmein.LMIServer/AgentSocket errno: (61) Connection refused
06/12/11 02:59:03,911 com.apple.launchd: (com.logmein.logmeinguiagent) Throttling respawn: Will start in 10 seconds
06/12/11 02:59:04,000 kernel: nstat_lookup_entry failed: 2
06/12/11 02:59:06,880 SecurityAgent: User info context values set for autrefois
06/12/11 02:59:06,880 SecurityAgent: User info context values set for autrefois
06/12/11 02:59:08,197 SecurityAgent: Login Window login proceeding
06/12/11 02:59:08,197 SecurityAgent: Login Window login proceeding
06/12/11 02:59:08,550 loginwindow: Login Window - Returned from Security Agent
06/12/11 02:59:08,557 loginwindow: USER_PROCESS: 68 console
06/12/11 02:59:08,588 airportd: _doAutoJoin: Already associated to “Merrol's Network”. Bailing on auto-join.
06/12/11 02:59:08,667 applepushserviced: Unable to bootstrap_lookup connection port for 'com.apple.iCalPush': unknown error code
06/12/11 02:59:08,793 com.apple.launchd.peruser.501: (com.logmein.logmeingui) Unknown key for boolean: UseLMILaunchAgentFixer
06/12/11 02:59:08,793 com.apple.launchd.peruser.501: (com.logmein.logmeinguiagent) Unknown key for boolean: UseLMILaunchAgentFixer
06/12/11 02:59:08,794 com.apple.launchd.peruser.501: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
06/12/11 02:59:08,796 com.apple.launchctl.Aqua: load: option requires an argument -- D
06/12/11 02:59:08,796 com.apple.launchctl.Aqua: usage: launchctl load [-wF] [-D <user|local|network|system|all>] paths...
06/12/11 02:59:09,568 UserEventAgent: CaptiveNetworkSupport:CNSServerRegisterUserAgent:187 new user agent port: 19471
06/12/11 02:59:09,741 com.apple.launchd.peruser.501: (com.apple.launchctl.Aqua[210]) Exited with code: 1
06/12/11 02:59:12,510 com.logmein.logmeinguiagent: 2011-12-06 02:59:12.421 - Info - LMIGUIAgent - Main - starting...
06/12/11 02:59:12,510 com.logmein.logmeinguiagent: 2011-12-06 02:59:12.508 - Info - LMIGUIAgent - Main - started:243 uid:501 (parent:176 launchd)
06/12/11 02:59:12,510 com.logmein.logmeinguiagent: 2011-12-06 02:59:12.508 - Info - LMIGUIAgent - Main - waiting for window server connection
06/12/11 02:59:12,511 com.logmein.logmeinguiagent: 2011-12-06 02:59:12.510 - Info - LMIGUIAgent - Main - waiting for window server session
06/12/11 02:59:12,511 com.logmein.logmeinguiagent: 2011-12-06 02:59:12.510 - Info - LMIGUIAgent - Main - connecting to session manager
06/12/11 02:59:12,511 prl_naptd: Starting Parallels Network Daemon
06/12/11 02:59:13,488 LogMeInGUI: LogMeIn GUI started
06/12/11 02:59:14,000 com.logmein.logmeinguiagent: 2011-12-06 02:59:13.999 - Debug - LMIGUIAgent - SessionManager - SessionAgentStarted
06/12/11 02:59:17,283 sudo: root : TTY=unknown ; PWD=/ ; USER=autrefois ; COMMAND=/bin/launchctl load /Library/LaunchAgents/com.parallels.vm.prl_pcproxy.plist
06/12/11 02:59:17,000 kernel: nstat_lookup_entry failed: 2
06/12/11 02:59:17,832 [0x0-0x14014].com.elgato.eyetvhelper: EyeTV Helper version 3.5.2 build 306
06/12/11 02:59:18,596 LogMeInGUI: Config watcher thread started
06/12/11 02:59:18,650 LogMeInGUI: applicationDidFinishLaunching
06/12/11 02:59:18,664 sudo: root : TTY=unknown ; PWD=/ ; USER=autrefois ; COMMAND=/bin/launchctl start com.parallels.vm.prl_pcproxy
06/12/11 02:59:19,820 LogMeInGUI: remoteControl:INACTIVE
06/12/11 02:59:19,843 LogMeInGUI: processLine:ACCESSMASK: 18446743936270597119
06/12/11 02:59:25,431 Mail: Using V2 Layout
06/12/11 02:59:27,111 SystemUIServer: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
06/12/11 02:59:27,112 com.apple.SystemUIServer.agent: SystemUIServer: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/Adobe Unit Types.osax" declares no loadable handlers.
06/12/11 02:59:27,123 Dock: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
06/12/11 02:59:27,123 com.apple.Dock.agent: Dock: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/Adobe Unit Types.osax" declares no loadable handlers.
06/12/11 02:59:27,400 Finder: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
06/12/11 02:59:27,400 com.apple.Finder: Finder: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/Adobe Unit Types.osax" declares no loadable handlers.
06/12/11 02:59:27,907 com.apple.Finder: Dropbox: Entered INJECT_pthread_entry
06/12/11 02:59:27,907 com.apple.Finder: Dropbox: Installing event loop timer
06/12/11 02:59:27,907 com.apple.Finder: Dropbox: proc: 0x1078e3e5b
06/12/11 02:59:27,907 com.apple.Finder: Dropbox: upp: 0x1078e3e5b
06/12/11 02:59:27,907 com.apple.Finder: Dropbox: InstallEventLoopTimer: 0x7fff898b10de
06/12/11 02:59:27,907 com.apple.Finder: Dropbox: GetMainEventLoop: 0x7fff89872861
06/12/11 02:59:27,907 com.apple.Finder: Dropbox: Loading /Library/DropboxHelperTools/Dropbox_u501/DropboxBundle.bundle/Contents/MacOS/Dr opboxBundle
06/12/11 02:59:27,907 com.apple.Finder: Dropbox: timer installed!
06/12/11 02:59:27,908 com.apple.Finder: Dropbox: dlopen returned: 0x7ff29bd821b0
06/12/11 02:59:27,908 com.apple.Finder: module initializer in main thread?: 1
06/12/11 02:59:32,294 osascript: Initializer-based scripting additions are no longer supported. "/Library/ScriptingAdditions/Adobe Unit Types.osax" not loaded.
06/12/11 02:59:32,637 osascript: Initializer-based scripting additions are no longer supported. "/Library/ScriptingAdditions/Adobe Unit Types.osax" not loaded.
06/12/11 02:59:33,219 osascript: Initializer-based scripting additions are no longer supported. "/Library/ScriptingAdditions/Adobe Unit Types.osax" not loaded.
06/12/11 02:59:48,648 Mail: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
06/12/11 02:59:48,648 [0x0-0x1e01e].com.apple.mail: Mail: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/Adobe Unit Types.osax" declares no loadable handlers.
06/12/11 02:59:58,932 LKDCHelper: Starting (uid=501)
06/12/11 03:01:58,164 com.logmein.logmeinguiagent: 2011-12-06 03:01:58.164 - Debug - LMIGUIAgent - SessionManager - sessionTerminating
06/12/11 03:01:58,164 com.logmein.logmeinguiagent: 2011-12-06 03:01:58.164 - Debug - LMIGUIAgent - SessionManager - DisplayServer stop
06/12/11 03:01:58,164 com.logmein.logmeinguiagent: 2011-12-06 03:01:58.164 - Debug - LMIGUIAgent - SessionManager - DisplayServer close
06/12/11 03:01:58,164 com.logmein.logmeinguiagent: 2011-12-06 03:01:58.164 - Debug - LMIGUIAgent - GUIAgent - DisplayServerStopped.Sent[243]
06/12/11 03:01:58,166 com.logmein.logmeinguiagent: Session - Error occured:read errno: (9) Bad file descriptor
06/12/11 03:01:58,166 com.logmein.logmeinguiagent: 2011-12-06 03:01:58.165 - Debug - LMIGUIAgent - SessionManager - Connection closed
06/12/11 03:01:58,166 com.logmein.logmeinguiagent: 2011-12-06 03:01:58.165 - Debug - LMIGUIAgent - SessionManager - Closing DisplayServer
06/12/11 03:01:58,166 com.logmein.logmeinguiagent: 2011-12-06 03:01:58.165 - Debug - LMIGUIAgent - SessionManager - DisplayServer close
06/12/11 03:01:58,166 com.logmein.logmeinguiagent: 2011-12-06 03:01:58.165 - Debug - LMIGUIAgent - SessionManager - Exiting
06/12/11 03:01:59,168 com.apple.launchd.peruser.501: (com.logmein.logmeinguiagent[243]) Exited with code: 1
06/12/11 03:02:02,557 com.logmein.logmeingui: Determine OS version
06/12/11 03:02:02,557 com.logmein.logmeingui: leopard
06/12/11 03:02:02,557 com.logmein.logmeingui: Executing command:unload -S Aqua /Library/LaunchAgents/com.logmein.logmeinguiagent.plist on launchd with sessiontype::Aqua
06/12/11 03:02:02,557 com.logmein.logmeingui: In session:Aqua
06/12/11 03:02:02,557 com.logmein.logmeingui: Executing command:/bin/launchctl unload -w "/Library/LaunchDaemons/com.logmein.logmeinserver.plist" 2>&1 euid:0 uid:0
06/12/11 03:03:02,059 com.apple.launchd.peruser.501: ([0x0-0x16016].com.getdropbox.dropbox[253]) Exited: Killed: 9
06/12/11 03:03:09,151 com.apple.Finder: Dropbox: Not loading image DropboxBundle because it's already loaded.
06/12/11 03:03:10,249 osascript: Initializer-based scripting additions are no longer supported. "/Library/ScriptingAdditions/Adobe Unit Types.osax" not loaded.
06/12/11 03:03:10,536 osascript: Initializer-based scripting additions are no longer supported. "/Library/ScriptingAdditions/Adobe Unit Types.osax" not loaded.
06/12/11 03:03:29,189 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:03:35,292 WindowServer: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
06/12/11 03:03:47,755 Microsoft AU Daemon: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/040CRDC200.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:03:47,755 Microsoft AU Daemon: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/040CRDC200.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:03:48,000 kernel: nstat_lookup_entry failed: 2
06/12/11 03:03:49,964 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:03:49,965 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/autodiscover/autodiscover.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:03:50,445 Microsoft AU Daemon: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/0409MSau02.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:03:50,445 Microsoft AU Daemon: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/0409MSau02.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:03:51,439 Microsoft AU Daemon: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/0409MSau02.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:03:51,439 Microsoft AU Daemon: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/0409MSau02.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:03:51,849 Microsoft AU Daemon: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/040CMSOf14.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:03:51,849 Microsoft AU Daemon: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/040CMSOf14.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:03:52,219 Microsoft AU Daemon: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/040CMSOf14.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:03:52,219 Microsoft AU Daemon: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/040CMSOf14.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:03:52,816 Microsoft AU Daemon: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/0409Merp2.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:03:52,816 Microsoft AU Daemon: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/0409Merp2.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:03:53,882 Microsoft AU Daemon: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/0409Merp2.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:03:53,882 Microsoft AU Daemon: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/0409Merp2.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:01,187 Microsoft AutoUpdate: Initializer-based scripting additions are no longer supported. "/Library/ScriptingAdditions/Adobe Unit Types.osax" not loaded.
06/12/11 03:04:01,826 Microsoft AutoUpdate: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/040CRDC200.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:01,826 Microsoft AutoUpdate: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/040CRDC200.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:06,039 Microsoft AutoUpdate: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/0409MSau02.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:06,040 Microsoft AutoUpdate: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/0409MSau02.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:06,907 Microsoft AutoUpdate: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/0409MSau02.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:06,907 Microsoft AutoUpdate: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/0409MSau02.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:07,304 Microsoft AutoUpdate: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/040CMSOf14.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:07,304 Microsoft AutoUpdate: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/040CMSOf14.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:07,311 Microsoft Outlook: Initializer-based scripting additions are no longer supported. "/Library/ScriptingAdditions/Adobe Unit Types.osax" not loaded.
06/12/11 03:04:08,028 Microsoft AutoUpdate: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/040CMSOf14.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:08,028 Microsoft AutoUpdate: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/040CMSOf14.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:08,526 Microsoft AutoUpdate: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/0409Merp2.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:08,527 Microsoft AutoUpdate: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/0409Merp2.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:09,055 Microsoft AutoUpdate: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/0409Merp2.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:09,055 Microsoft AutoUpdate: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/0409Merp2.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:15,917 Mail: -[POP3Connection fetchMessages:totalBytes:] failed: Error Domain=NSPOSIXErrorDomain Code=54 "Échec de la tentative d’envoi de données vers le serveur « (null) »." UserInfo=0x7f8b2951df10 {NSLocalizedDescription=Échec de la tentative d’envoi de données vers le serveur « (null) ».}
06/12/11 03:04:23,226 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:24,030 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/autodiscover/autodiscover.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:24,215 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/autodiscover/autodiscover.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:24,978 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/autodiscover/autodiscover.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:24,980 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:24,980 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:25,070 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/autodiscover/autodiscover.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:25,372 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:25,523 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/OAB/41b159ae-659a-4263-aa94-2dc96ab09af2/oab.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:25,540 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:26,536 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/OAB/41b159ae-659a-4263-aa94-2dc96ab09af2/oab.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:26,946 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:27,853 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/OAB/41b159ae-659a-4263-aa94-2dc96ab09af2/oab.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:28,034 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:28,802 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:29,000 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/OAB/41b159ae-659a-4263-aa94-2dc96ab09af2/ddba70fe-e20a-4024-9fea-3770413daf4d -binpatch-26.lzx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:29,000 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/OAB/41b159ae-659a-4263-aa94-2dc96ab09af2/ddba70fe-e20a-4024-9fea-3770413daf4d -binpatch-26.lzx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:29,047 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:29,167 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:29,434 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/autodiscover/autodiscover.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:29,558 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:29,558 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:29,914 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/OAB/41b159ae-659a-4263-aa94-2dc96ab09af2/ddba70fe-e20a-4024-9fea-3770413daf4d -binpatch-25.lzx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:29,914 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/OAB/41b159ae-659a-4263-aa94-2dc96ab09af2/ddba70fe-e20a-4024-9fea-3770413daf4d -binpatch-25.lzx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:30,684 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/autodiscover/autodiscover.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:30,685 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:30,878 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:30,900 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:31,098 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/OAB/41b159ae-659a-4263-aa94-2dc96ab09af2/ddba70fe-e20a-4024-9fea-3770413daf4d -binpatch-24.lzx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:31,098 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/OAB/41b159ae-659a-4263-aa94-2dc96ab09af2/ddba70fe-e20a-4024-9fea-3770413daf4d -binpatch-24.lzx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:31,123 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/autodiscover/autodiscover.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:42,094 Safari: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
06/12/11 03:04:42,094 [0x0-0x24024].com.apple.Safari: Safari: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/Adobe Unit Types.osax" declares no loadable handlers.
06/12/11 03:05:00,000 kernel: nstat_lookup_entry failed: 2
06/12/11 03:05:04,207 com.apple.launchd.peruser.0: Background: Bug: launchd_core_logic.c:3059 (25247):3
06/12/11 03:05:04,207 com.apple.launchd.peruser.0: Background: job_mig_intran() was confused by PID 388 UID 0 EUID 0 Mach Port 0x1a07:
06/12/11 03:05:04,207 com.apple.launchd.peruser.0: Bug: launchd_core_logic.c:8610 (25247):3: j != NULL
06/12/11 03:05:10,381 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:05:10,527 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:05:10,960 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/OAB/41b159ae-659a-4263-aa94-2dc96ab09af2/ddba70fe-e20a-4024-9fea-3770413daf4d -binpatch-23.lzx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:05:10,960 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/OAB/41b159ae-659a-4263-aa94-2dc96ab09af2/ddba70fe-e20a-4024-9fea-3770413daf4d -binpatch-23.lzx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:05:11,237 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:05:11,372 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:05:13,629 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:05:13,630 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:05:15,156 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:05:15,245 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:05:15,347 Microsoft Outlook: CFURLCreateWithBytes wAfter biting the bullet and ordering more RAM, my computer now is working a ton better. So that must have been the main issue. With 8 GB RAM, I can now even run Parallels fluidly (better than my work PC!) where before simple things like logging in to my MBP after reboot could take forever.
The place I went to had several other people getting RAM upgrades at the same time as me, so between this and other comments I've seen in discussions here and elsewhere on the Internets, I take it to mean that either Apple should bump up the base RAM on its new machines, and/or stop charging so much for additional RAM.
I refused to believe a Pro machine bought with Lion installed would come with too little RAM for light to medium usage, but it was apparently the case. I'll mark this as a correct answer and hope some other poor soul will come across this thread and be helped by it. -
Iphone 4 front camera not working even after reboot,resets and restore.
i am using iphone 4 .I have problem that front camera is not working even after reboot,resets and restore with itunes.I thing there is a hardware problem.
Now i wont to go apple store for replace the phone because phone is under warranty period.But problem is that i lost the receipt.Will apple store help me without my receipt ?please help meIf setting up as new device without using the latest backup does not bring the camera function back, get it looked at or serviced by Apple:
How to back up your data and set up as a new device
Apple - Support - Service Answer Center -
VPN (VPN Client or AnyConnect) fails to work after reboot
I have both an IPSec and an SSL VPN setup on my UC560. A user on the network is having issues establishing a VPN connection after rebooting their system.
This issue is only happening for one user on the network. Everyone else can connect perfectly fine after rebooting.
If I reinstall the VPN Client, it will work perfectly but I can't establish a connection once the computer is rebooted.
Any help is greatly appreciated.
Regards,
SamI have both an IPSec and an SSL VPN setup on my UC560. A user on the network is having issues establishing a VPN connection after rebooting their system.
This issue is only happening for one user on the network. Everyone else can connect perfectly fine after rebooting.
If I reinstall the VPN Client, it will work perfectly but I can't establish a connection once the computer is rebooted.
Any help is greatly appreciated.
Regards,
Sam -
Every time I ask Siri to find something near me, she says that she cannot find my location because I need to turn on location services in the settings menu and in siri. These are both on, and after rebooting my phone it still doesn't work correctly. How do I fix this?
No, the app does not have to completely restart. It gets shifted in its open state into storage. Similar to how a computer uses the hard disk when it has insufficient memory.
What complicates things is that sometimes memory does not get returned for reuse when you close an app. Thus yo should periodically double click the Home button and "delete" unnecessary apps from the multitasking dock and power off and then back on the iPod. -
My Macbook was hacked by somebody right after activating downloaded VLC player.
I couldn’t control my machine. Every thing was messed up! Finally after reboot I realized that even my administration password was changed. Stupid hint I was able to reed: What located in box above low case ? I used my friends computer and founded hot to fix my problem using Unix commands to reboot in a single user mode. I founded a lot of different solutions which had prity the same beginnings but very complicated continuation, which, I understood will force me to cach during restoration anuther crap – time bomb in my mac! Finaly I did restor. somehow. But still feel somebodyies presents. Safary messed up – I will send you a log Itunes – messed up. Speaker in a top menu – grayed, and I can’t control my volume. But the most triky thing – bouth my Apple keybords – internal and mostly bluetouth external also working and typing wired! I am sorry for my spelling, because I cant check spell for Mac’s Word (in Microsoft it was F7) I have also several attacks from my neighbors by community I know their names, because they are somethere very close to me – I can see them throuth FI-FI connection. They often kick-me out from my place and started to use my resaurces. And also Mackeeper make me a hard time!
In Microsoft times u just reinstalled computer – clean installetion from corporate licensed disk. But now I am a beginner in MAC – I love it! But a lot of new and triky – at this way
Fore example – my goal – to do fool Macbook backup at external USB drive using boot srartup option and make my life yaser in case of crash. But now, I don’t know if I can trust recommended program Carbon copy cloner – Ms. Bombich?
I am very sorry for my spelling, because I feel somebodies presents, who playin with me.
Final question Do I need some antivirus Mac compatable which is update paches, service packs? How to map defolt documents folder not to a local, but to external USB?
Esquse me for a lot of questions, but I am beginner in MAC, and I LOVE it!
PS. Good news. Looks like Safari came back! Somebody, probably allredy helping!
But my interface qute different from original – so something still wrong!Didn't really read much at all of your post. Much, much too long, irrelevant details and & no paragraphs.
Can't use time machine due to corruptness
Post over here -> Mac OS X v10.6 - Snow Leopard forum
About my macbook and apple ID how can I upgrade my Macbook from 10.6.3 to 10.6.8 with out all the permissions being changed and corrupt??
Same as above. Post in the correct forum.
Need to gain access to my apple Id that would be a great start
-> http://support.apple.com/kb/HT5625 -
SCVMM Service (2012) does not start after reboot VMM-Server
VMM-Server: WIN 2008 R2 Standard x64
SQL-Server: 2008 R2 x64
Hi,
after reboot VMM-Server we get the following error messages from the EventViewer when starting the VMM-service:
Event ID: 19999
Virtual Machine Manager (vmmservice:130936) has encountered an error and needed to exit the process. Windows generated an error report with the following parameters:
Event:VMM20
P1(appName):vmmservice
P2(appVersion):3.0.6005.0
P3(assemblyName):Remoting
P4(assemblyVer):3.0.6019.0
P5(methodName):M.V.R.IndigoSerializableObject.BuildKnownAssemblyTypes
P6(exceptionType):S.Reflection.ReflectionTypeLoadException
P7(callstackHash):17ca
and
Event ID: 1
System.Reflection.ReflectionTypeLoadException: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
at System.Reflection.Module._GetTypesInternal(StackCrawlMark& stackMark)
at System.Reflection.Assembly.GetTypes()
at Microsoft.VirtualManager.Remoting.IndigoSerializableObject.BuildKnownAssemblyTypes(Assembly assembly)
at Microsoft.VirtualManager.Remoting.IndigoSerializableObject.InitializeKnownTypesCache(List`1 assembliesToExamine)
at Microsoft.VirtualManager.Engine.Remoting.IndigoServiceHost.InitializeKnownTypesCache()
at Microsoft.VirtualManager.Engine.VirtualManagerService.OnStart(String[] args)-2146232830
Thanks in advance!You would have to post the same in the XI forums for more relevant answers.
Please close this thread and open a new on in the XI forums or send a mail to
[email protected]
tp have it moved. -
Apps wont open after reboot and reinstall
apps wont open after reboot and reinstall
yeah that was a bit open wasnt it.. sorry..
i have 10.8.2 mountain lion, just did a reboot and pulled my original user from my back up back into the new system, opened a new user profile that is the same name as the one i had backed up.
now i cant open up anything in Iworks 09... or anything inb microsoft office 2011, plus i can open garage band.... i used time machine retore to retrieve those apps... but they come up with errors
any ideas other than trying to reinstall thses.? -
This problem has only appeared in the past few days before that I had nio problems with itunes. Firstly I discovered that I could only open Itunes once after reboot - thereafter it would not reopen until I reboot again. I have spent considerable hours yesterday talking to the Apple help by phone and tried all there suggestions including of course reinstalling itunes amongst other things. Eventually I thought the problem had been solved when I discovered that I could suddenly open Itunes repeatedly without rebooting. After a short time I then discovered that the reason it was working agai was that I had rebooted with the internet disconnected and itunes would open repeatedly as normal provide I left the internet disconnected. When I reconnect to internet the problem resurfaces. HELP
For those still wondering how to install ios 6.1 on 5th gen iPod, you need to download it off of apples official website and then shift click restore from backup and choose the downloaded ios 6.1
apples one year warrant covers any hardware problems like these right?
Maybe you are looking for
-
Hi Team, In general PO and then GR. Question 1 - But, To make PO and then Inbound Delivery and then GR against Inbound Delivery. What are the setting that are required to acheive this? Question 2 - Still we have PO and Inbound Delivery, can we make G
-
How do I download a TV program?
I purchased a TV program on my home PC and downloaded it. But I want to download it on to my laptop in the offcie? It seems like they want to charge me again for the download?
-
Flash Player will not install.
I have had to make an account for this forum because this particular problem has been driving me insane for a while now. Basically, my laptop needs to update the the latest Flash Player. But everytime I download the file and start the installation it
-
How to install the new keyboard to X220?
I have X220 thinkpad, And I buy the new keyboard and exchanged both keyboards. Normal typing is OK, but some function keys aren't properly working. When I checked the website, I have to update keyboard bios. How can I do? Plz help me.
-
Cannot Open Existing Files (Projects) in Garageband
GB projects created only weeks ago are not listed in 'recent projects' so I click on 'Open an Existing File'. I can see the file but the Open button remains shaded. I tried opening by clicking Control/Open in Garageband - I get message "Output.AIF co