ISCSI volume lost, have the .img file but no access to data. Help please, WD support worthless!
Basically, I have a iSCSI target which I cannot access after re-installing windows because the CHAP "secret" I thought I knew was wrong. Although I was told there was no way to acess the .img file by WD, I was able to pull the image using an SSH connection to the EX2 from a hidden folder. So now I have that file stored locally. Of course it would just be too easy to be able to mount that file and I understand why that is. However, through research, I am seeing that it may in fact be possible some how. Can anyone please help me with the resources that I have? I have alot of info that I really do not want to lose and I dont have the funds to pay a data recovery company thousands of dollars like WD support suggested. Is the .img file encrypted or is it just a FS that windows wont recognize? Please help and I would really appreciate any info. Thank you.
if the iSCSI target is protected with a username and password. It would not do any good even with a linux tool to open it. Like WD tech support suggest to find a recovery company is all your best bet. If you still have access to your NAS, you should be able to change the iSCSI target to with CHAP enable to NONE. From your Windows try to access your iSCSI target again without a password. bda714 wrote:
After being told multiple times by WD support that there was nothing I could possibly do to access my LUN i have gotten to a point that I believe is close to where I am trying to be. Along the way, there were many times that the support tech's at WD had told me what was said to be rock solid information, was proven to be wrong. . . at this point I feel like I am better off on my own and hopefully with some help from the community. Basically, I have a iSCSI target which I cannot access after re-installing windows because the CHAP I thought I knew was wrong. Although I was told there was no way to acess the .img file by WD, I was able to pull the image using an SSH connection to the EX2. So now I have that file stored locally. Of course it would just be too easy to be able to mount that file and I understand why that is. However, through research, I am seeing that it may in fact be possible some how. Can anyone please help me with the resources that I have? I have alot of info that I really do not want to lose and I dont have the funds to pay a data recovery company thousands of dollars like WD support suggested. Is the .img file encrypted or is it just a FS that windows wont recognize? Please help and I would really appreciate any info. Thank you.
Similar Messages
-
No volume on my games on ipad , but works on music. Help please
Lost the volume on my IPAD game apps. Volume works playing music, just not on the games. Help please
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
Cheers, Tom -
My ipad just won't let me sign in with my apple password on FaceTime or iMessage since updating to ios7 it says check my network connection, even though my iPhone works fine with the same password, can anybody help please, I have tried numerous things but nothing works. Will I have to wait for a bug fix to sort this? I hear they are working on one a the minute, I hate ios7
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/ -
i have just upgraded my iphone 4 to a 5. and was trying to back my 4 up on the computure so i could get all my pics and music on to my 5. but its saying i need to update my itunes which i have tried to do and is still not working any help please i have been trying for hours
how is it not working?
what version of itunes?
what ios on iphone4?
does it give an error msg? -
Can't seem to make this work. I am up to date with my updates on both I-Phone and I-Pad. The "Hand-off" feature is working, and I don't want it. How do I turn it off? I don't have the option to do that when I go to General & Settings. Is it located somewhere else? Apple says that is where it is. What am I doing wrong, The "wonderful feature" is driving me crazy. Surely it is others also...
Deb *******
<Edited by Host>Hi debinarizona,
I see the Handoff setting under "Settings > General > Handoff & Suggested Apps".
Connect your iPhone, iPad, and iPod touch using Continuity
Best Regards,
Nubz -
I dropped my ipod classic and i tried turning it back on and it asks me to plug it in. I did so and it said the data was corrupted. I tried resetting it and it said something about fire wire? I looked on the internet and tried setting it to "Disk mode" and plugging it in and trying it that way, but it doesnt come up on my itunes. I tried diagnosing the issue on the ipod itself and I get to the "Accessorize test" and it says I dont have a FWPWR. How can I fix this??
Ok you got to make sure that you are the adiminstrtor on the computer. After you do that right click on my computer and hit properties. Make sure under the general tab that you are running windows (2000) service pack (4) or Windows XP Home or Pro service pack (2). After you have established that type in on the support search box uninstall itunes and quicktime for windows. Then once you have downloaded itunes restore the ipod and see if this fixes your problem.
-
is there something else I can do to get Pandora to play again?
The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848 -
I was lately downlaoding a 700mb file, but i lost the internet connection and only 635mb was downloaded and i have the .part file but the download menu says that download failed so i cant click resume, is their any way that i can continue dowlaoding the file without the need redownloading from the beginning?
I do not know if your file can be recovered. But I may be able help you to recreate it with ease. If you will settle for a composite where all image are re-sized for a particular tile size and virtually cropped to its aspect ratio. However all source image need be gathered into a folder to use my script process. Paste Image Roll Script and Picture Package Support Link http://www.mouseprints.net/old/dpr/PasteImageRoll.jsx
-
Hi, I have successfully loaded my new CS6 Design Web Premier software onto my Mac. I am trying to also instal it on my daughters laptop. I have the dmg file, but when I run installer, I enter the serial number and it says its not recognised?
Is there a way around this? Please don't tell me I've just loaded it onto the wrong computer!
Nicole.You mention in the title that you copied the dmg file. Do you mean you copied it from one machine to the other? If so, acquire the installation files the same way you did for your machine and install using that.
If you continue to have a problem contact Adobe Support thru chat...
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC ) -
The attached VI works when I run it initially creating the XML file, but when I change data and run after the XML file is created, it's not updated with new data. What am I doing wrong?
Thank you.
Solved!
Go to Solution.
Attachments:
Attractive Force XML.vi 23 KBThat looks like the logic which was written into the VI
Inner true/ false case:
(file exists : false) write to XML file, unflatten for display
(file exists : true) read from XML file, unflatten for display
At no time when the file exists (true case) is the XML file updated... -
Upgrading to V4 has lost all of my Bookmarks, I still have the restore files in my profile data but they will not load, I have tried importing the html backup file too but it didn't work either. How can I get them back?
Ok this is bizzare!
Thank you for your response, I went throught each and every step without any luck, even got the recovery programme, and painstakingly tried to sift through all that mumbojumbo to find what i needed. finally found the bookmark bit, but it had been fully overwritten :(, so on reading about previous ff versions, found the sqlite thingys, and they were relatively unscathed(partly written over, but saveable apparently TG), saved them to adiff drive, amongst other possibly good folders. Then looked up how to install them, and it said to close FF, and install to profile folder.
So i tried to close FF, and the original problem from a few days ago, where it asked me if 'i was sure i wanted to close this window as it has X tabs open', popped up again. This is where 'open blank page' selection was set, over 'open previous tabs'. Wanting to save that info on how to sort out these friggin files, I reset the Option to 'open previous tabs', and closed FF. After unsucessfully searching for the profile folder on my laptop, i opened FF intending to search online for where i could find said folder.
AND BANG, surprise surprise, the FF I had just closed with only tabs open about finding out what the heck to do, had disappeared, and instead my original saved tabs were up, and my bookmarks are there..... I am gobsmacked! what the heck just happened there???
I have made 3 back up in different folders now, of those friggin bookmarks. I am weary now tho of shutting it all down.... what if its back to the other pages I had with no bookmarks, tomorrow :( -
My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
How do I find bad music files? I have thousands of files, but some are bad. When I try to load them into iTunes, it just spins. I need a routine to identify and remove the bad files. Any ideas?
Hi ajoddo20,
Welcome to the Apple Support Communities!
You can use Home Sharing to import music and other media from one computer to another. Please use the instructions and information located in the attached article for information on how to complete the process.
iTunes 11 for Mac: Use Home Sharing to import items from another iTunes library
Cheers,
Joe -
I deleted all my photos and videos and then delete the deleted files but the photo app is still taking up 12 GB of space and I have no room for new stuff. How can I clear the memory space used by my deleted videos and photos? I don't know why the photos are still taking up space and if I will have to reset my phone to get rid of the problem.
Hey there TowneJ,
Welcome to Apple Support Communities.
The article linked below provides troubleshooting tips that’ll likely resolve the issue that you’ve described, where deleted files appear to be taking up space on your iPhone 5.
If you get a "Not enough free space" alert on your iPhone, iPad, or iPod touch - Apple Support
So long,
-Jason -
My old Mac died. I had it backed up to a Time Machine external drive (fortunately). I have a new Mac. I want to get my entire iTunes library from the Time Machine drive to the new Mac. I want not only the music files but all the "library" metadata, playlists, song rankings, unique genre designations. How do I do this?
No backup is a huge mistake.
You can redownload some itunes purchases in some countries:
Downloading past purchases from the App Store ... - Apple - Support
Maybe you are looking for
-
A relatively new user here having problems with importing files to FreeHand. I'm trying to import a high resolution PNG file to a large page (~36 x ~60inches) for plotting. When importing this file I geet a large x-box instead of the image preview, a
-
Material Dynamic Re-order Quantity
Dear Masters, I have a requirement here for Material based MRP planning where I want to have a dynamic re-order quantity. The requirement is as below: 1. Suppose I have 5 Equipments in Plant P1. 2. Now, I am creating Equipment BOM for each Equipments
-
Hello all! I need to export only a group of people, i am not working with companies, is there any option to filter some users to export? Regards! Maria
-
Selection criterion in custom DataSource doesn't appear in Infopackage
Hello everyone! I have implemented a custom DataSource for service processes in CRM. I have defined a timestamp field as a selection criterion. In BW, in the Datasource fields tab, this field appears correctly defined, but it doesn't appear in the In
-
PP Sequences Imported as Footage Not Comp
Hello. I am having a sudden and strange problem. I am trying to import a Premiere sequence into After Effects and am having the sequence show up as Footage. I have imported another sequence from the same project and it imported perfectly (sequential