ISCSI Windows 2003 MSCS on SunFire x4200
Has anyone setup a iSCSI Windows 2003 MSCS on a SunFire x4200? I'm trying to configure a 3-node MSCS and have seen cluster services stop when one node is rebooted.
Hi,
It looks like it is trying to create an account for SAP and getting error. It's permission problem. You may want to continue installation with administration previliges.
or try restart.
Thanks,
Similar Messages
-
SAP ECC 6.0 Behavior on Windows 2003 MSCS
Dear Experts,
I have SAP ECC 6.0 run on Windows 2003 Enterprise SP 64-bit Cluster (MSCS) and when we run testing on failover we got the following result:
All cluster groups in node1 - Shutdown Node 1 - Node 2 Up
- Whoever login to Node 1 will be disconnect during failover
- Whoever login to node 2 and run transaction during failover will be hang till failover done successfully
- Whoever login to node 2 and only run the transaction after the failvover done will not feell any disruption
- New logon session is failed until basis is bringing online the following in cluster administrator under SAP Group (SAP SID 00 Service & SAP SID 01 Service)
The same result if we shutdown Node 2 and all cluster group failover to node 1.
Both services are install local in each node and start option has been made "manual"
My question:
1. Is the above result is common?
2. Is there anyway to make SAP SID 00 & 01 to be automatic failover?
Regards
Rian WHi Rian Wisandano,
All your questions/queries looks common to me...
In any given scenario, resources both SAP & DB based resoureces have to be online for you to access/logon to the system using SAPGUI. And it's very common that, unless resources (either service or instance specific) are online at cluster level the corresponding resources in SAP MMC won't be online. In your query one of that was, about 00 and 01 services, YES they are 2 different instances of your SAP build and corresponding entries at cluster level.
And it's expected behavior that, while fail-over or fail-back of cluster resoureces from one cluster node to other cluster possible cluster node that, resources goes into offline and then mover over/move back and then comes online. So as its a thumb rule for given seconds/minutes (based on the resources) resources at cluster level will be offline before they come online. So during this time you will not be able logon to your SAP system because its not only cluster resoureces but also SAP MMC corresponding entries also will be offline....Along with cluster resources come online the resources/entreis in SAP MMC also comes automatically.
And it's correct to setup, Cluster Service to 'Manual' in High Availabilty Setup.
New logon session is failed until basis is bringing online the following in cluster administrator under SAP Group (SAP SID 00 Service & SAP SID 01 Service)
The same result if we shutdown Node 2 and all cluster group failover to node 1.
I hope this helps you to understand the behavior of cluster.
Revert back if any further clarification required.
Regards
Sekhar -
Central Instance Error on WIndows 2003 MSCS on oracle 10g
HI All,
Im installing central instance on node1 on local disk and im getting the following error.Can any one help me out pls
sapinst log
INFO 2008-01-23 15:24:42
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/keydb.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/keydb.1.xml'.
INFO 2008-01-23 15:24:42
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\inifile.xml.
INFO 2008-01-23 15:24:42
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/inifile.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/inifile.1.xml'.
INFO 2008-01-23 15:24:42
Execute step fillContext of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0.
INFO 2008-01-23 15:24:47
Execute step fillContext of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0.
INFO 2008-01-23 15:24:47
Execute step readProductXML of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Read_Product_XML|ind|ind|ind|ind|1|0.
WARNING 2008-01-23 15:24:47
The install parameter INSTPARA_DB is already defined (existing value IND, new value ORA ).
INFO 2008-01-23 15:24:47
Execute step checkRuntimeSystem of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Preinstall|ind|ind|ind|ind|0|0.
INFO 2008-01-23 15:24:47
Execute step askStandardMode of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Preinstall|ind|ind|ind|ind|0|0.
INFO 2008-01-23 15:24:47
Execute step syncKeydb of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Preinstall|ind|ind|ind|ind|0|0.
INFO 2008-01-23 15:24:47
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/product.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/product.1.xml'.
INFO 2008-01-23 15:24:47
Execute step changeUserInstall of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Preinstall|ind|ind|ind|ind|0|0.
INFO 2008-01-23 15:24:47
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\change.log.
INFO 2008-01-23 15:24:47
Output of change user /install is written to the logfile change.log.
WARNING 2008-01-23 15:24:47
Execution of the command "change user /install" finished with return code 1. Output:
Install mode does not apply to a Terminal server configured for remote administration.
INFO 2008-01-23 15:24:47
Execute step chgautInstdirPublicAllOS4 of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Preinstall|ind|ind|ind|ind|0|0.
INFO 2008-01-23 15:24:47
Execute step replaceDLLs of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Preinstall|ind|ind|ind|ind|0|0.
INFO 2008-01-23 15:24:48
File not found: [C:/DOCUME1/centiq/LOCALS1/Temp/1/sapinst_exe.3344.1201101841/msvcp71.dll].
INFO 2008-01-23 15:24:48
File not found: [C:/DOCUME1/centiq/LOCALS1/Temp/1/sapinst_exe.3344.1201101841/msvcr71.dll].
INFO 2008-01-23 15:24:48
Execute step registerEventsDll of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Preinstall|ind|ind|ind|ind|0|0.
INFO 2008-01-23 15:24:48
Execute step AddPrivileges of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Preinstall|ind|ind|ind|ind|0|0.
INFO 2008-01-23 15:24:48
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'ECO\Centiq' on host '.'.
INFO 2008-01-23 15:24:48
Execute step checkInstDirPermissions of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Preinstall|ind|ind|ind|ind|0|0.
INFO 2008-01-23 15:24:48
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\testfile.1.
INFO 2008-01-23 15:24:48
Removing file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\testfile.1.
INFO 2008-01-23 15:24:48
Execute step
Component W2K_ServicePack_Check|ind|ind|ind|ind
Preprocess of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
INFO 2008-01-23 15:24:52
Execute step sync of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
INFO 2008-01-23 15:24:52
Execute step adminCheck of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
INFO 2008-01-23 15:24:52
Execute step W2KSPCheck of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
INFO 2008-01-23 15:24:52
Execute step XPSPCheck of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
INFO 2008-01-23 15:24:52
Execute step DNSCheck of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0.
INFO 2008-01-23 15:24:53
DNS is configured correctly.
INFO 2008-01-23 15:24:53
Execute step done of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0.
INFO 2008-01-23 15:24:53
Execute step startDefaultMode of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0.
INFO 2008-01-23 15:24:53
Execute step setDefaults of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_getJavaHome|ind|ind|ind|ind|2|0.
INFO 2008-01-23 15:24:53
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath C:/DOCUME1/centiq/LOCALS1/Temp/1/sapinst_exe.3344.1201101841/JAR/ins-j2ee.jar com.sap.ins.j2ee.GetSystemProperty" finished with return code 0. Output: #
#Wed Jan 23 15:24:53 GMT 2008
java.runtime.name=Java(TM) 2 Runtime Environment, Standard Edition
sun.boot.library.path=C\:
j2sdk1.4.2_15-x64
jre
bin
java.vm.version=1.4.2_15-b02
java.vm.vendor=Sun Microsystems Inc.
java.vendor.url=http\://java.sun.com/
path.separator=;
java.vm.name=Java HotSpot(TM) 64-Bit Server VM
file.encoding.pkg=sun.io
user.country=GB
sun.os.patch.level=Service Pack 2
java.vm.specification.name=Java Virtual Machine Specification
user.dir=C\:
Program Files
sapinst_instdir
NW04S
SYSTEM
ORA
HA
ABAPJAVA
CI
java.runtime.version=1.4.2_15-b02
java.awt.graphicsenv=sun.awt.Win32GraphicsEnvironment
java.endorsed.dirs=C\:
j2sdk1.4.2_15-x64
jre
lib
endorsed
os.arch=amd64
java.io.tmpdir=C\:
DOCUME1
centiq
LOCALS1
Temp
1
line.separator=\r\n
java.vm.specification.vendor=Sun Microsystems Inc.
user.variant=
os.name=Windows 2003
sun.java2d.fontpath=
java.library.path=C\:
j2sdk1.4.2_15-x64
bin;.;C\:
WINDOWS
system32;C\:
WINDOWS;L\:
oracle
OFS
CLI
jre
1.4.2
bin
client;L\:
oracle
OFS
CLI
jre
1.4.2
bin;L\:
oracle
PPI
102
bin;C\:
WINDOWS
system32;C\:
WINDOWS;C\:
WINDOWS
System32
Wbem;C\:
j2sdk1.4.2_15-x64
bin;L\:
oracle
OFS
CLI
fs
fssvr
bin;L\:
oracle
OFS
CLI
fs
bin;L\:
oracle
OFS
SRV
fs
fssvr
bin
java.specification.name=Java Platform API Specification
java.class.version=48.0
java.util.prefs.PreferencesFactory=java.util.prefs.WindowsPreferencesFactory
os.version=5.2
user.home=C\:
Documents and Settings
centiq
user.timezone=Europe/London
java.awt.printerjob=sun.awt.windows.WPrinterJob
file.encoding=Cp1252
java.specification.version=1.4
java.class.path=C\:/DOCUME1/centiq/LOCALS1/Temp/1/sapinst_exe.3344.1201101841/JAR/ins-j2ee.jar
user.name=centiq
java.vm.specification.version=1.0
java.home=C\:
j2sdk1.4.2_15-x64
jre
sun.arch.data.model=64
user.language=en
java.specification.vendor=Sun Microsystems Inc.
awt.toolkit=sun.awt.windows.WToolkit
java.vm.info=mixed mode
java.version=1.4.2_15
java.ext.dirs=C\:
j2sdk1.4.2_15-x64
jre
lib
ext
sun.boot.class.path=C\:
j2sdk1.4.2_15-x64
jre
lib
rt.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
i18n.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
sunrsasign.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
jsse.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
jce.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
charsets.jar;C\:
j2sdk1.4.2_15-x64
jre
classes
java.vendor=Sun Microsystems Inc.
file.separator=
java.vendor.url.bug=http\://java.sun.com/cgi-bin/bugreport.cgi
sun.io.unicode.encoding=UnicodeLittle
sun.cpu.endian=little
sun.cpu.isalist=amd64
INFO 2008-01-23 15:24:53
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath C:/DOCUME1/centiq/LOCALS1/Temp/1/sapinst_exe.3344.1201101841/JAR/ins-j2ee.jar com.sap.ins.j2ee.GetSystemProperty" finished with return code 0. Output: #
#Wed Jan 23 15:24:53 GMT 2008
java.runtime.name=Java(TM) 2 Runtime Environment, Standard Edition
sun.boot.library.path=C\:
j2sdk1.4.2_15-x64
jre
bin
java.vm.version=1.4.2_15-b02
java.vm.vendor=Sun Microsystems Inc.
java.vendor.url=http\://java.sun.com/
path.separator=;
java.vm.name=Java HotSpot(TM) 64-Bit Server VM
file.encoding.pkg=sun.io
user.country=GB
sun.os.patch.level=Service Pack 2
java.vm.specification.name=Java Virtual Machine Specification
user.dir=C\:
Program Files
sapinst_instdir
NW04S
SYSTEM
ORA
HA
ABAPJAVA
CI
java.runtime.version=1.4.2_15-b02
java.awt.graphicsenv=sun.awt.Win32GraphicsEnvironment
java.endorsed.dirs=C\:
j2sdk1.4.2_15-x64
jre
lib
endorsed
os.arch=amd64
java.io.tmpdir=C\:
DOCUME1
centiq
LOCALS1
Temp
1
line.separator=\r\n
java.vm.specification.vendor=Sun Microsystems Inc.
user.variant=
os.name=Windows 2003
sun.java2d.fontpath=
java.library.path=C\:
j2sdk1.4.2_15-x64
bin;.;C\:
WINDOWS
system32;C\:
WINDOWS;L\:
oracle
OFS
CLI
jre
1.4.2
bin
client;L\:
oracle
OFS
CLI
jre
1.4.2
bin;L\:
oracle
PPI
102
bin;C\:
WINDOWS
system32;C\:
WINDOWS;C\:
WINDOWS
System32
Wbem;C\:
j2sdk1.4.2_15-x64
bin;L\:
oracle
OFS
CLI
fs
fssvr
bin;L\:
oracle
OFS
CLI
fs
bin;L\:
oracle
OFS
SRV
fs
fssvr
bin
java.specification.name=Java Platform API Specification
java.class.version=48.0
java.util.prefs.PreferencesFactory=java.util.prefs.WindowsPreferencesFactory
os.version=5.2
user.home=C\:
Documents and Settings
centiq
user.timezone=Europe/London
java.awt.printerjob=sun.awt.windows.WPrinterJob
file.encoding=Cp1252
java.specification.version=1.4
java.class.path=C\:/DOCUME1/centiq/LOCALS1/Temp/1/sapinst_exe.3344.1201101841/JAR/ins-j2ee.jar
user.name=centiq
java.vm.specification.version=1.0
java.home=C\:
j2sdk1.4.2_15-x64
jre
sun.arch.data.model=64
user.language=en
java.specification.vendor=Sun Microsystems Inc.
awt.toolkit=sun.awt.windows.WToolkit
java.vm.info=mixed mode
java.version=1.4.2_15
java.ext.dirs=C\:
j2sdk1.4.2_15-x64
jre
lib
ext
sun.boot.class.path=C\:
j2sdk1.4.2_15-x64
jre
lib
rt.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
i18n.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
sunrsasign.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
jsse.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
jce.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
charsets.jar;C\:
j2sdk1.4.2_15-x64
jre
classes
java.vendor=Sun Microsystems Inc.
file.separator=
java.vendor.url.bug=http\://java.sun.com/cgi-bin/bugreport.cgi
sun.io.unicode.encoding=UnicodeLittle
sun.cpu.endian=little
sun.cpu.isalist=amd64
INFO 2008-01-23 15:24:53
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath C:/DOCUME1/centiq/LOCALS1/Temp/1/sapinst_exe.3344.1201101841/JAR/ins-j2ee.jar;C:/DOCUME1/centiq/LOCALS1/Temp/1/sapinst_exe.3344.1201101841/JAR/sapxmltoolkit.jar com.sap.ins.j2ee.TestClassLoader" finished with return code 0. Output: CORRECT
INFO 2008-01-23 15:24:53
Found a valid JAVA_HOME directory C:\j2sdk1.4.2_15-x64 with JDK version 1.4.2_15.
INFO 2008-01-23 15:25:08
Copied file 'Z:/Java_comp/J2EE_OSINDEP/JDKVersion.xml' to '.'.
INFO 2008-01-23 15:25:08
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath C:/DOCUME1/centiq/LOCALS1/Temp/1/sapinst_exe.3344.1201101841/JAR/ins-j2ee.jar;C:/DOCUME1/centiq/LOCALS1/Temp/1/sapinst_exe.3344.1201101841/JAR/sapxmltoolkit.jar com.sap.ins.j2ee.TestClassLoader" finished with return code 0. Output: CORRECT
INFO 2008-01-23 15:25:08
Found a valid JAVA_HOME directory C:\j2sdk1.4.2_15-x64 with JDK version 1.4.2_15.
INFO 2008-01-23 15:25:08
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath C:/DOCUME1/centiq/LOCALS1/Temp/1/sapinst_exe.3344.1201101841/JAR/ins-j2ee.jar;C:/DOCUME1/centiq/LOCALS1/Temp/1/sapinst_exe.3344.1201101841/JAR/sapxmltoolkit.jar com.sap.ins.j2ee.TestClassLoader" finished with return code 0. Output: CORRECT
INFO 2008-01-23 15:25:08
Execute step getCD of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_getJavaHome|ind|ind|ind|ind|2|0.
INFO 2008-01-23 15:25:08
Execute step verifyJavaHome of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_getJavaHome|ind|ind|ind|ind|2|0.
INFO 2008-01-23 15:25:08
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath C:/DOCUME1/centiq/LOCALS1/Temp/1/sapinst_exe.3344.1201101841/JAR/ins-j2ee.jar com.sap.ins.j2ee.GetSystemProperty" finished with return code 0. Output: #
#Wed Jan 23 15:25:08 GMT 2008
java.runtime.name=Java(TM) 2 Runtime Environment, Standard Edition
sun.boot.library.path=C\:
j2sdk1.4.2_15-x64
jre
bin
java.vm.version=1.4.2_15-b02
java.vm.vendor=Sun Microsystems Inc.
java.vendor.url=http\://java.sun.com/
path.separator=;
java.vm.name=Java HotSpot(TM) 64-Bit Server VM
file.encoding.pkg=sun.io
user.country=GB
sun.os.patch.level=Service Pack 2
java.vm.specification.name=Java Virtual Machine Specification
user.dir=C\:
Program Files
sapinst_instdir
NW04S
SYSTEM
ORA
HA
ABAPJAVA
CI
java.runtime.version=1.4.2_15-b02
java.awt.graphicsenv=sun.awt.Win32GraphicsEnvironment
java.endorsed.dirs=C\:
j2sdk1.4.2_15-x64
jre
lib
endorsed
os.arch=amd64
java.io.tmpdir=C\:
DOCUME1
centiq
LOCALS1
Temp
1
line.separator=\r\n
java.vm.specification.vendor=Sun Microsystems Inc.
user.variant=
os.name=Windows 2003
sun.java2d.fontpath=
java.library.path=C\:
j2sdk1.4.2_15-x64
bin;.;C\:
WINDOWS
system32;C\:
WINDOWS;L\:
oracle
OFS
CLI
jre
1.4.2
bin
client;L\:
oracle
OFS
CLI
jre
1.4.2
bin;L\:
oracle
PPI
102
bin;C\:
WINDOWS
system32;C\:
WINDOWS;C\:
WINDOWS
System32
Wbem;C\:
j2sdk1.4.2_15-x64
bin;L\:
oracle
OFS
CLI
fs
fssvr
bin;L\:
oracle
OFS
CLI
fs
bin;L\:
oracle
OFS
SRV
fs
fssvr
bin
java.specification.name=Java Platform API Specification
java.class.version=48.0
java.util.prefs.PreferencesFactory=java.util.prefs.WindowsPreferencesFactory
os.version=5.2
user.home=C\:
Documents and Settings
centiq
user.timezone=Europe/London
java.awt.printerjob=sun.awt.windows.WPrinterJob
file.encoding=Cp1252
java.specification.version=1.4
java.class.path=C\:/DOCUME1/centiq/LOCALS1/Temp/1/sapinst_exe.3344.1201101841/JAR/ins-j2ee.jar
user.name=centiq
java.vm.specification.version=1.0
java.home=C\:
j2sdk1.4.2_15-x64
jre
sun.arch.data.model=64
user.language=en
java.specification.vendor=Sun Microsystems Inc.
awt.toolkit=sun.awt.windows.WToolkit
java.vm.info=mixed mode
java.version=1.4.2_15
java.ext.dirs=C\:
j2sdk1.4.2_15-x64
jre
lib
ext
sun.boot.class.path=C\:
j2sdk1.4.2_15-x64
jre
lib
rt.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
i18n.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
sunrsasign.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
jsse.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
jce.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
charsets.jar;C\:
j2sdk1.4.2_15-x64
jre
classes
java.vendor=Sun Microsystems Inc.
file.separator=
java.vendor.url.bug=http\://java.sun.com/cgi-bin/bugreport.cgi
sun.io.unicode.encoding=UnicodeLittle
sun.cpu.endian=little
sun.cpu.isalist=amd64
INFO 2008-01-23 15:25:12
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath C:/DOCUME1/centiq/LOCALS1/Temp/1/sapinst_exe.3344.1201101841/JAR/ins-j2ee.jar com.sap.ins.j2ee.GetSystemProperty" finished with return code 0. Output: #
#Wed Jan 23 15:25:12 GMT 2008
java.runtime.name=Java(TM) 2 Runtime Environment, Standard Edition
sun.boot.library.path=C\:
j2sdk1.4.2_15-x64
jre
bin
java.vm.version=1.4.2_15-b02
java.vm.vendor=Sun Microsystems Inc.
java.vendor.url=http\://java.sun.com/
path.separator=;
java.vm.name=Java HotSpot(TM) 64-Bit Server VM
file.encoding.pkg=sun.io
user.country=GB
sun.os.patch.level=Service Pack 2
java.vm.specification.name=Java Virtual Machine Specification
user.dir=C\:
Program Files
sapinst_instdir
NW04S
SYSTEM
ORA
HA
ABAPJAVA
CI
java.runtime.version=1.4.2_15-b02
java.awt.graphicsenv=sun.awt.Win32GraphicsEnvironment
java.endorsed.dirs=C\:
j2sdk1.4.2_15-x64
jre
lib
endorsed
os.arch=amd64
java.io.tmpdir=C\:
DOCUME1
centiq
LOCALS1
Temp
1
line.separator=\r\n
java.vm.specification.vendor=Sun Microsystems Inc.
user.variant=
os.name=Windows 2003
sun.java2d.fontpath=
java.library.path=C\:
j2sdk1.4.2_15-x64
bin;.;C\:
WINDOWS
system32;C\:
WINDOWS;L\:
oracle
OFS
CLI
jre
1.4.2
bin
client;L\:
oracle
OFS
CLI
jre
1.4.2
bin;L\:
oracle
PPI
102
bin;C\:
WINDOWS
system32;C\:
WINDOWS;C\:
WINDOWS
System32
Wbem;C\:
j2sdk1.4.2_15-x64
bin;L\:
oracle
OFS
CLI
fs
fssvr
bin;L\:
oracle
OFS
CLI
fs
bin;L\:
oracle
OFS
SRV
fs
fssvr
bin
java.specification.name=Java Platform API Specification
java.class.version=48.0
java.util.prefs.PreferencesFactory=java.util.prefs.WindowsPreferencesFactory
os.version=5.2
user.home=C\:
Documents and Settings
centiq
user.timezone=Europe/London
java.awt.printerjob=sun.awt.windows.WPrinterJob
file.encoding=Cp1252
java.specification.version=1.4
java.class.path=C\:/DOCUME1/centiq/LOCALS1/Temp/1/sapinst_exe.3344.1201101841/JAR/ins-j2ee.jar
user.name=centiq
java.vm.specification.version=1.0
java.home=C\:
j2sdk1.4.2_15-x64
jre
sun.arch.data.model=64
user.language=en
java.specification.vendor=Sun Microsystems Inc.
awt.toolkit=sun.awt.windows.WToolkit
java.vm.info=mixed mode
java.version=1.4.2_15
java.ext.dirs=C\:
j2sdk1.4.2_15-x64
jre
lib
ext
sun.boot.class.path=C\:
j2sdk1.4.2_15-x64
jre
lib
rt.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
i18n.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
sunrsasign.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
jsse.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
jce.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
charsets.jar;C\:
j2sdk1.4.2_15-x64
jre
classes
java.vendor=Sun Microsystems Inc.
file.separator=
java.vendor.url.bug=http\://java.sun.com/cgi-bin/bugreport.cgi
sun.io.unicode.encoding=UnicodeLittle
sun.cpu.endian=little
sun.cpu.isalist=amd64
INFO 2008-01-23 15:25:12
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath C:/DOCUME1/centiq/LOCALS1/Temp/1/sapinst_exe.3344.1201101841/JAR/ins-j2ee.jar com.sap.ins.j2ee.GetSystemProperty" finished with return code 0. Output: #
#Wed Jan 23 15:25:12 GMT 2008
java.runtime.name=Java(TM) 2 Runtime Environment, Standard Edition
sun.boot.library.path=C\:
j2sdk1.4.2_15-x64
jre
bin
java.vm.version=1.4.2_15-b02
java.vm.vendor=Sun Microsystems Inc.
java.vendor.url=http\://java.sun.com/
path.separator=;
java.vm.name=Java HotSpot(TM) 64-Bit Server VM
file.encoding.pkg=sun.io
user.country=GB
sun.os.patch.level=Service Pack 2
java.vm.specification.name=Java Virtual Machine Specification
user.dir=C\:
Program Files
sapinst_instdir
NW04S
SYSTEM
ORA
HA
ABAPJAVA
CI
java.runtime.version=1.4.2_15-b02
java.awt.graphicsenv=sun.awt.Win32GraphicsEnvironment
java.endorsed.dirs=C\:
j2sdk1.4.2_15-x64
jre
lib
endorsed
os.arch=amd64
java.io.tmpdir=C\:
DOCUME1
centiq
LOCALS1
Temp
1
line.separator=\r\n
java.vm.specification.vendor=Sun Microsystems Inc.
user.variant=
os.name=Windows 2003
sun.java2d.fontpath=
java.library.path=C\:
j2sdk1.4.2_15-x64
bin;.;C\:
WINDOWS
system32;C\:
WINDOWS;L\:
oracle
OFS
CLI
jre
1.4.2
bin
client;L\:
oracle
OFS
CLI
jre
1.4.2
bin;L\:
oracle
PPI
102
bin;C\:
WINDOWS
system32;C\:
WINDOWS;C\:
WINDOWS
System32
Wbem;C\:
j2sdk1.4.2_15-x64
bin;L\:
oracle
OFS
CLI
fs
fssvr
bin;L\:
oracle
OFS
CLI
fs
bin;L\:
oracle
OFS
SRV
fs
fssvr
bin
java.specification.name=Java Platform API Specification
java.class.version=48.0
java.util.prefs.PreferencesFactory=java.util.prefs.WindowsPreferencesFactory
os.version=5.2
user.home=C\:
Documents and Settings
centiq
user.timezone=Europe/London
java.awt.printerjob=sun.awt.windows.WPrinterJob
file.encoding=Cp1252
java.specification.version=1.4
java.class.path=C\:/DOCUME1/centiq/LOCALS1/Temp/1/sapinst_exe.3344.1201101841/JAR/ins-j2ee.jar
user.name=centiq
java.vm.specification.version=1.0
java.home=C\:
j2sdk1.4.2_15-x64
jre
sun.arch.data.model=64
user.language=en
java.specification.vendor=Sun Microsystems Inc.
awt.toolkit=sun.awt.windows.WToolkit
java.vm.info=mixed mode
java.version=1.4.2_15
java.ext.dirs=C\:
j2sdk1.4.2_15-x64
jre
lib
ext
sun.boot.class.path=C\:
j2sdk1.4.2_15-x64
jre
lib
rt.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
i18n.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
sunrsasign.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
jsse.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
jce.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
charsets.jar;C\:
j2sdk1.4.2_15-x64
jre
classes
java.vendor=Sun Microsystems Inc.
file.separator=
java.vendor.url.bug=http\://java.sun.com/cgi-bin/bugreport.cgi
sun.io.unicode.encoding=UnicodeLittle
sun.cpu.endian=little
sun.cpu.isalist=amd64
INFO 2008-01-23 15:25:13
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath C:/DOCUME1/centiq/LOCALS1/Temp/1/sapinst_exe.3344.1201101841/JAR/ins-j2ee.jar;C:/DOCUME1/centiq/LOCALS1/Temp/1/sapinst_exe.3344.1201101841/JAR/sapxmltoolkit.jar com.sap.ins.j2ee.TestClassLoader" finished with return code 0. Output: CORRECT
INFO 2008-01-23 15:25:13
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/JDKVersion.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/JDKVersion.1.xml'.
INFO 2008-01-23 15:25:13
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/JDKVersion.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/JDKVersion.2.xml'.
INFO 2008-01-23 15:25:13
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/JDKVersion.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/JDKVersion.3.xml'.
INFO 2008-01-23 15:25:13
Execute step verifyPolicy of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_getJavaHome|ind|ind|ind|ind|2|0.
INFO 2008-01-23 15:25:13
Creating directory C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\jdkPolicyCheck.
INFO 2008-01-23 15:25:13
Working directory changed to C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/jdkPolicyCheck.
INFO 2008-01-23 15:25:13
Working directory changed to C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI.
INFO 2008-01-23 15:25:13
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\local_policy.log.
INFO 2008-01-23 15:25:13
Output of C:\j2sdk1.4.2_15-x64\bin\jar.exe is written to the logfile local_policy.log.
INFO 2008-01-23 15:25:13
Output of C:\j2sdk1.4.2_15-x64\bin\jar.exe xvf C:/j2sdk1.4.2_15-x64/jre/lib/security/local_policy.jar:
extracted: META-INF/MANIFEST.MF
extracted: META-INF/JCE_DSA.SF
extracted: META-INF/JCE_DSA.DSA
extracted: META-INF/JCE_RSA.SF
extracted: META-INF/JCE_RSA.RSA
created: META-INF/
extracted: default_local.policy
INFO 2008-01-23 15:25:13
Working directory changed to C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/jdkPolicyCheck.
INFO 2008-01-23 15:25:13
Working directory changed to C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI.
INFO 2008-01-23 15:25:13
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\US_export_policy.log.
INFO 2008-01-23 15:25:13
Output of C:\j2sdk1.4.2_15-x64\bin\jar.exe is written to the logfile US_export_policy.log.
INFO 2008-01-23 15:25:13
Output of C:\j2sdk1.4.2_15-x64\bin\jar.exe xvf C:/j2sdk1.4.2_15-x64/jre/lib/security/US_export_policy.jar:
extracted: META-INF/MANIFEST.MF
extracted: META-INF/JCE_DSA.SF
extracted: META-INF/JCE_DSA.DSA
extracted: META-INF/JCE_RSA.SF
extracted: META-INF/JCE_RSA.RSA
created: META-INF/
extracted: default_US_export.policy
INFO 2008-01-23 15:25:13
Removing file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\jdkPolicyCheck\default_local.policy.
INFO 2008-01-23 15:25:13
Removing file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\jdkPolicyCheck\default_US_export.policy.
INFO 2008-01-23 15:25:13
Removing file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\jdkPolicyCheck\META-INF\JCE_DSA.DSA.
INFO 2008-01-23 15:25:13
Removing file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\jdkPolicyCheck\META-INF\JCE_DSA.SF.
INFO 2008-01-23 15:25:13
Removing file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\jdkPolicyCheck\META-INF\JCE_RSA.RSA.
INFO 2008-01-23 15:25:13
Removing file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\jdkPolicyCheck\META-INF\JCE_RSA.SF.
INFO 2008-01-23 15:25:13
Removing file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\jdkPolicyCheck\META-INF\MANIFEST.MF.
INFO 2008-01-23 15:25:13
Removing directory C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/jdkPolicyCheck/META-INF.
INFO 2008-01-23 15:25:13
Removing directory C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/jdkPolicyCheck.
INFO 2008-01-23 15:25:13
Execute step setNWOption of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_getJavaHome|ind|ind|ind|ind|2|0.
INFO 2008-01-23 15:25:13
Execute step fillContext of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0.
INFO 2008-01-23 15:25:13
Execute step collect of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_readProfileDir|ind|ind|ind|ind|0|0.
INFO 2008-01-23 15:25:15
Found these instances:
sid: PPI, number: 00, name: ASCS00, host: sapxpi
sid: PPI, number: 01, name: SCS01, host: sapxpi
sid: PPI, number: 10, name: ERS10, host: s5
sid: PPI, number: 11, name: ERS11, host: s5
sid: PPI, number: 10, name: ERS10, host: s6
sid: PPI, number: 11, name: ERS11, host: s6
INFO 2008-01-23 15:25:16
Execute step getMounts of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_readProfileDir|ind|ind|ind|ind|0|0.
INFO 2008-01-23 15:25:16
Execute step getMounts of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_readProfileDir|ind|ind|ind|ind|0|0|NW_getMounts|ind|ind|ind|ind|0|0.
INFO 2008-01-23 15:25:16
Execute step updateMountInfo of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_readProfileDir|ind|ind|ind|ind|0|0.
INFO 2008-01-23 15:25:16
Execute step getProfileDir of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_readProfileDir|ind|ind|ind|ind|0|0.
INFO 2008-01-23 15:26:37
Execute step fillContext2 of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0.
INFO 2008-01-23 15:26:38
Execute step isUnicodeFromStack of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_getUnicode|ind|ind|ind|ind|1|0.
INFO 2008-01-23 15:26:38
Execute step isUnicodeFromExecutables of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_getUnicode|ind|ind|ind|ind|1|0.
INFO 2008-01-23 15:26:39
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\msg_server.exe.log.
INFO 2008-01-23 15:26:39
Working directory changed to C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI.
INFO 2008-01-23 15:26:39
Output of F:\usr\sap\PPI\ASCS00\exe\msg_server.exe -v is written to the logfile msg_server.exe.log.
INFO 2008-01-23 15:26:39
Execution of the command "F:\usr\sap\PPI\ASCS00\exe\msg_server.exe -v" finished with return code 0. Output:
msgserver information
kernel release 700
kernel make variant 700_REL
DBMS client library
compiled on NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00
compiled for 64 BIT
compilation mode UNICODE
compile time Aug 31 2006 20:13:01
update level 0
patch number 73
source id 0.075
supported environment
database (SAP, table SVERS) 700
operating system
Windows NT 5.0
Windows NT 5.1
Windows NT 5.2
msgserver patch information
( 0.001) MS: enable server shutdown (note 821875)
( 0.001) MS: dont bind external port for SCS instance (note 821875)
( 0.002) MS: new pseudo parameter rdisp/msserv_no (note 834052)
( 0.007) CST patch collection 21 2005 (note 845887)
( 0.011) CST patch collection 24 2005 (note 851195)
( 0.014) CST Patch Collection 28 2005 (note 860319)
( 0.018) CST Patch Collection 31 2005 (note 867690)
( 0.023) CST Patch Collection 36 2005 (note 874665)
( 0.023) CST Patch Collection 37 2005 (note 877058)
( 0.023) VMC Patch Collection 6 (note 865932)
( 0.026) CST Patch Collection 39 2005 (note 884266)
( 0.033) CST Patch Collection 45 2005 (note 895230)
( 0.034) J2EE engine can't reconnect (note 895230)
( 0.036) CST Patch Collection 49 2005 (note 904777)
( 0.046) CST Patch Collection 06 2006 (note 921223)
( 0.049) CST Patch Collection 09 2006 (note 928898)
( 0.050) Avoid deadlock in exception handler, when writing the stacktrace (note 907123)
( 0.053) CST Patch Collection 14 2006 (note 937223)
( 0.057) CST Patch Collection 17 2006 (note 944284)
( 0.060) CST Patch Collection 22 2006 (note 950845)
( 0.065) P4HTTP added as logon type (note 958374)
( 0.065) CST Patch Collection 26 2006 (note 957514)
( 0.069) CST Patch Collection 29 2006 (note 962917)
( 0.073) CST Patch Collection 33 2006 (note 970657)
INFO 2008-01-23 15:26:39
Execute step isUnicodeFromMsgServer of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_getUnicode|ind|ind|ind|ind|1|0.
INFO 2008-01-23 15:26:39
Execute step isUnicodeFromProfile of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_getUnicode|ind|ind|ind|ind|1|0.
INFO 2008-01-23 15:26:39
Execute step askUnicode of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_getUnicode|ind|ind|ind|ind|1|0.
INFO 2008-01-23 15:26:39
Execute step checkMsgServer of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_checkMsgServer|ind|ind|ind|ind|2|0.
INFO 2008-01-23 15:26:39
Execute step askABAPMs of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_checkMsgServer|ind|ind|ind|ind|2|0.
INFO 2008-01-23 15:26:40
Connect to message server (sapxpi/3900) succeeded.
INFO 2008-01-23 15:26:40
Disconnect from message server (sapxpi/3900) succeeded.
INFO 2008-01-23 15:26:40
Connect to message server (sapxpi/3900) succeeded.
INFO 2008-01-23 15:26:40
Message server (sapxpi/3900) allows connections to its internal port from this host.
INFO 2008-01-23 15:26:40
Disconnect from message server (sapxpi/3900) succeeded.
INFO 2008-01-23 15:26:40
Execute step askJavaMs of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_checkMsgServer|ind|ind|ind|ind|2|0.
INFO 2008-01-23 15:26:40
Connect to message server (sapxpi/3901) succeeded.
INFO 2008-01-23 15:26:40
Disconnect from message server (sapxpi/3901) succeeded.
INFO 2008-01-23 15:26:40
Connect to message server (sapxpi/3901) succeeded.
INFO 2008-01-23 15:26:40
Message server (sapxpi/3901) allows connections to its internal port from this host.
INFO 2008-01-23 15:26:40
Disconnect from message server (sapxpi/3901) succeeded.
INFO 2008-01-23 15:26:40
Execute step getUnicode of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_checkMsgServer|ind|ind|ind|ind|2|0.
INFO 2008-01-23 15:26:40
Connect to message server (sapxpi/3900) succeeded.
INFO 2008-01-23 15:26:40
Disconnect from message server (sapxpi/3900) succeeded.
INFO 2008-01-23 15:26:40
Connect to message server (sapxpi/3900) succeeded.
INFO 2008-01-23 15:26:40
Disconnect from message server (sapxpi/3900) succeeded.
INFO 2008-01-23 15:26:40
Execute step getMsPort of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_checkMsgServer|ind|ind|ind|ind|2|0.
INFO 2008-01-23 15:26:41
Connect to message server (sapxpi/3900) succeeded.
INFO 2008-01-23 15:26:41
Disconnect from message server (sapxpi/3900) succeeded.
INFO 2008-01-23 15:26:41
Connect to message server (sapxpi/3900) succeeded.
INFO 2008-01-23 15:26:41
Disconnect from message server (sapxpi/3900) succeeded.
INFO 2008-01-23 15:26:41
Execute step getUnixIDs of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_checkMsgServer|ind|ind|ind|ind|2|0.
INFO 2008-01-23 15:26:41
Execute step fillContext of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_GetUserParameter|ind|ind|ind|ind|3|0.
INFO 2008-01-23 15:26:41
Execute step unpcackSECINSTTOOLS of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_GetUserParameter|ind|ind|ind|ind|3|0|NW_GetMasterPassword|ind|ind|ind|ind|0|0.
INFO 2008-01-23 15:26:41
Creating directory C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec.
INFO 2008-01-23 15:26:41
Working directory changed to C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/installsec.
INFO 2008-01-23 15:26:41
Working directory changed to C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI.
INFO 2008-01-23 15:26:41
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\SECINSTTOOLS.log.
INFO 2008-01-23 15:26:41
Output of C:\DOCUME1\centiq\LOCALS1\Temp\1\sapinst_exe.3344.1201101841\SAPCAR.exe is written to the logfile SECINSTTOOLS.log.
INFO 2008-01-23 15:26:41
Output of C:\DOCUME1\centiq\LOCALS1\Temp\1\sapinst_exe.3344.1201101841\SAPCAR.exe -x -v -g -i -f Z:\BS2005\IM_WINDOWS_X86_64\COMMON\INSTALL\SECINSTTOOLS.SAR,:
SAPCAR: processing archive Z:/BS2005/IM_WINDOWS_X86_64/COMMON/INSTALL/SECINSTTOOLS.SAR (version 2.01)
x exception.jar
x logging.jar
x tc_sec_compat.jar
SAPCAR: 3 file(s) extracted
INFO 2008-01-23 15:26:41
Execute step askMasterPwd of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_GetUserParameter|ind|ind|ind|ind|3|0|NW_GetMasterPassword|ind|ind|ind|ind|0|0.
INFO 2008-01-23 15:26:56
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\FormalPasswordCheck.log.
INFO 2008-01-23 15:26:57
Output of C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\exception.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\logging.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\tc_sec_compat.jar" com.sap.security.tools.FormalPasswordCheck -a check -s abap -u DDIC -message_file FormalPasswordCheck.message -p XXXXXX is written to the logfile FormalPasswordCheck.log.
INFO 2008-01-23 15:26:57
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\exception.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\logging.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\tc_sec_compat.jar" com.sap.security.tools.FormalPasswordCheck -a check -s abap -u DDIC -message_file FormalPasswordCheck.message -p XXXXXX" finished with return code 0. Output:
Jan 23, 2008 3:26:57 PM Info: Formal password check tool (com.sap.security.tools.FormalPasswordCheck) called for action "check"
Jan 23, 2008 3:26:57 PM Info: Called for user "DDIC"
Jan 23, 2008 3:26:57 PM Info: Stack type: ABAP
Jan 23, 2008 3:26:57 PM Info: Performing check for username
Jan 23, 2008 3:26:57 PM Info: Performing check for password
Jan 23, 2008 3:26:57 PM Info: Operation executed successfully
Jan 23, 2008 3:26:57 PM Info: Leaving with return code 0
INFO 2008-01-23 15:26:57
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\FormalPasswordCheck.log.
INFO 2008-01-23 15:26:57
Output of C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\exception.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\logging.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\tc_sec_compat.jar" com.sap.security.tools.FormalPasswordCheck -a check -s abap -u SAPSTAR -message_file FormalPasswordCheck.message -p XXXXXX is written to the logfile FormalPasswordCheck.log.
INFO 2008-01-23 15:26:57
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\exception.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\logging.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\tc_sec_compat.jar" com.sap.security.tools.FormalPasswordCheck -a check -s abap -u SAPSTAR -message_file FormalPasswordCheck.message -p XXXXXX" finished with return code 0. Output:
Jan 23, 2008 3:26:57 PM Info: Formal password check tool (com.sap.security.tools.FormalPasswordCheck) called for action "check"
Jan 23, 2008 3:26:57 PM Info: Called for user "SAPSTAR"
Jan 23, 2008 3:26:57 PM Info: Stack type: ABAP
Jan 23, 2008 3:26:57 PM Info: Performing check for username
Jan 23, 2008 3:26:57 PM Info: Performing check for password
Jan 23, 2008 3:26:57 PM Info: Operation executed successfully
Jan 23, 2008 3:26:57 PM Info: Leaving with return code 0
INFO 2008-01-23 15:26:57
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\FormalPasswordCheck.log.
INFO 2008-01-23 15:26:57
Output of C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\exception.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\logging.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\tc_sec_compat.jar" com.sap.security.tools.FormalPasswordCheck -a check -s abap -u J2EE_ADMIN -message_file FormalPasswordCheck.message -p XXXXXX is written to the logfile FormalPasswordCheck.log.
INFO 2008-01-23 15:26:57
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\exception.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\logging.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\tc_sec_compat.jar" com.sap.security.tools.FormalPasswordCheck -a check -s abap -u J2EE_ADMIN -message_file FormalPasswordCheck.message -p XXXXXX" finished with return code 0. Output:
Jan 23, 2008 3:26:57 PM Info: Formal password check tool (com.sap.security.tools.FormalPasswordCheck) called for action "check"
Jan 23, 2008 3:26:57 PM Info: Called for user "J2EE_ADMIN"
Jan 23, 2008 3:26:57 PM Info: Stack type: ABAP
Jan 23, 2008 3:26:57 PM Info: Performing check for username
Jan 23, 2008 3:26:57 PM Info: Performing check for password
Jan 23, 2008 3:26:57 PM Info: Operation executed successfully
Jan 23, 2008 3:26:57 PM Info: Leaving with return code 0
INFO 2008-01-23 15:26:57
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\FormalPasswordCheck.log.
INFO 2008-01-23 15:26:57
Output of C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\exception.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\logging.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\tc_sec_compat.jar" com.sap.security.tools.FormalPasswordCheck -a check -s abap -u J2EE_GUEST -message_file FormalPasswordCheck.message -p XXXXXX is written to the logfile FormalPasswordCheck.log.
INFO 2008-01-23 15:26:58
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\exception.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\logging.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\tc_sec_compat.jar" com.sap.security.tools.FormalPasswordCheck -a check -s abap -u J2EE_GUEST -message_file FormalPasswordCheck.message -p XXXXXX" finished with return code 0. Output:
Jan 23, 2008 3:26:58 PM Info: Formal password check tool (com.sap.security.tools.FormalPasswordCheck) called for action "check"
Jan 23, 2008 3:26:58 PM Info: Called for user "J2EE_GUEST"
Jan 23, 2008 3:26:58 PM Info: Stack type: ABAP
Jan 23, 2008 3:26:58 PM Info: Performing check for username
Jan 23, 2008 3:26:58 PM Info: Performing check for password
Jan 23, 2008 3:26:58 PM Info: Operation executed successfully
Jan 23, 2008 3:26:58 PM Info: Leaving with return code 0
INFO 2008-01-23 15:26:58
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\FormalPasswordCheck.log.
INFO 2008-01-23 15:26:58
Output of C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\exception.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\logging.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\tc_sec_compat.jar" com.sap.security.tools.FormalPasswordCheck -a check -s abap -u SAPJSF -message_file FormalPasswordCheck.message -p XXXXXX is written to the logfile FormalPasswordCheck.log.
INFO 2008-01-23 15:26:58
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\exception.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\logging.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\tc_sec_compat.jar" com.sap.security.tools.FormalPasswordCheck -a check -s abap -u SAPJSF -message_file FormalPasswordCheck.message -p XXXXXX" finished with return code 0. Output:
Jan 23, 2008 3:26:58 PM Info: Formal password check tool (com.sap.security.tools.FormalPasswordCheck) called for action "check"
Jan 23, 2008 3:26:58 PM Info: Called for user "SAPJSF"
Jan 23, 2008 3:26:58 PM Info: Stack type: ABAP
Jan 23, 2008 3:26:58 PM Info: Performing check for username
Jan 23, 2008 3:26:58 PM Info: Performing check for password
Jan 23, 2008 3:26:58 PM Info: Operation executed successfully
Jan 23, 2008 3:26:58 PM Info: Leaving with return code 0
INFO 2008-01-23 15:26:58
Execute step setDefaults of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_GetUserParameter|ind|ind|ind|ind|3|0|NW_GetUserParameterWindows|ind|ind|ind|ind|1|0.
INFO 2008-01-23 15:26:58
Execute step askDomain of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_GetUserParameter|ind|ind|ind|ind|3|0|NW_GetUserParameterWindows|ind|ind|ind|ind|1|0.
INFO 2008-01-23 15:26:58
Execute step askPasswords of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_GetUserParameter|ind|ind|ind|ind|3|0|NW_GetUserParameterWindows|ind|ind|ind|ind|1|0.
INFO 2008-01-23 15:27:06
Execute step fillContext of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_getDBInfo|ind|ind|ind|ind|4|0.
INFO 2008-01-23 15:27:08
Execute step setInstallationLoadType of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_getDBInfo|ind|ind|ind|ind|4|0|NW_getLoadType|ind|ind|ind|ind|0|0.
INFO 2008-01-23 15:27:08
Execute step askSystemCopyLoadType of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_getDBInfo|ind|ind|ind|ind|4|0|NW_getLoadType|ind|ind|ind|ind|0|0.
INFO 2008-01-23 15:27:08
Execute step setLoadType of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_getDBInfo|ind|ind|ind|ind|4|0|NW_getLoadType|ind|ind|ind|ind|0|0.
INFO 2008-01-23 15:27:08
Execute step setInstallDB of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_getDBInfo|ind|ind|ind|ind|4|0.
INFO 2008-01-23 15:27:08
Execute step fillDB6InitializeContext of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_getDBInfo|ind|ind|ind|ind|4|0.
INFO 2008-01-23 15:27:08
Execute step fillContext of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_GetDBUserParameter|ind|ind|ind|ind|5|0.
INFO 2008-01-23 15:27:08
Execute step sanityCheckAccounts of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0.
INFO 2008-01-23 15:27:08
Execute step fillContext2 of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0.
INFO 2008-01-23 15:27:08
Execute step fillPRCContext of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0.
INFO 2008-01-23 15:27:08
Execute step fillContextliveCache of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0.
INFO 2008-01-23 15:27:08
Execute step loadUsageTypes of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|SAP_Software_Features_Init|ind|ind|ind|ind|13|0.
INFO 2008-01-23 15:27:09
Execute step stopDefaultMode of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0.
INFO 2008-01-23 15:27:09
Execute step fillContextUsageTypes of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|14|0.
INFO 2008-01-23 15:27:09
Execute step setAllPossible of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|14|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
INFO 2008-01-23 15:27:09
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/usages_data.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/usages_data.1.xml'.
INFO 2008-01-23 15:27:09
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/usages_data.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/usages_data.2.xml'.
INFO 2008-01-23 15:27:09
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/jexclude.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/jexclude.1.xml'.
INFO 2008-01-23 15:27:09
Execute step determineScenarioParameters of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|14|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
INFO 2008-01-23 15:27:09
Execute step prepareUsagesTableForUserInputXml of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|14|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
INFO 2008-01-23 15:27:09
Execute step determinePossibleUsageTypesXml of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|14|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0Hi,
It looks like it is trying to create an account for SAP and getting error. It's permission problem. You may want to continue installation with administration previliges.
or try restart.
Thanks, -
Install Oracle 10g on Windows 2003 Server cluster (MSCS)
Hi all
How do I install Oracle 10g on Windows 2000 cluster (MSCS installed)?
I have a 2-nodes Microsoft windows 2003 server cluster and I want to install Oracle 10g,
Do I folloow this order:
1. Install the software on both without the database
2. Create the database from the first node
in this case, The second node can see the database as it is available?,
and what about the IP adresses?
If you can point me to some documentation, or help in any way, I would appreciate it.
Thanks for any help.Read here...
http://download.oracle.com/docs/html/A96685_01/intro.htm
>>
Oracle Fail Safe comprises multiple components: Oracle Fail Safe Manager, Oracle Services for MSCS, and server components specific to Oracle Fail Safe.
>>
So I don't know how you can achieve this without Fail Safe.
There might be other link which I cannot find right now. -
OS Migration from Windows 2003 cluster to Windows 2008 R2 MSCS
We want to go for windows 2008 R2 server ( 64-Bit) MSCS by migrating from windows 2003 Cluster ( 32- Bit) . We are running on ECC 6.0 and oracle 10.2.0.2 DB.
Is it possible ?
Is it traditional System copy if so how to migrate the cluster ?
Regards> 2. If the oracle version is 10.2.0.2 then does it will support Windows 2008 R2.
You need at least 10.2.0.4 (you need to install that version with a separate DVD, you can't install with the normal Oracle DVD (10.2.0.1). See
Note 1303262 - Oracle on Windows Server 2008
Be aware of the fact that the normal standard support for 10.2.x is ending at end of july (you'll have to pay an extra maintenance fee if you continue to run that version) - see
Note 1110995 - Extended maintenance for Oracle Version 10.2
So if you now do a system copy to new hardware with a new os anyway, I would upgrade to 11.2.
Markus -
Windows 2003 Upgrade to Windows 2008 on MSCS
Hi ,
We were running our NW 7.0 ABAP+JAVA system on Windows 2003 and SQL 2005 . Somehow in some misscommunication the Network administrator has formated the system without taking the OS level image backup . This is our production system .
We did not take the system export before that .
Here is the situtaion :
He has detach the database and SAN . Install Windows 2008 and SQL 2008 . after this we have attached the database and SAN both ,
Now do we need to delte all the old SAP installation files from the SAN or we can just install the Central Service Instance and we will be good ? Do we need to do the rest of the instllation like Database Instance installation ,First MSCS Node ,Additional MSCS node etc...
What is the best way to install the SAP system on it with all the data . We have the data files and system files available with us .
Appriciate your quick help on this .
Thanks ,
Bhanu Pratap SinghHi orkun,
That is what i was thinking but SAP is not recommending this and asking me to Go back to Windows 2003 and SQL 2005 and install SAP their from Scratch .
They are not suggesting to install SAP on windows 2008 and restore the database .
Thanks ,
Bhanu Pratap Singh -
Tnslistener Service is missing in services.msc in windows 2003 10gr2
Hi All.
I got one error in my server(windows 2003 10gr2)....Protocol adaptor error(ora-12560).
In services <tnslistener> is missing(I don't know how it is missing), because of this am not able to connect to my database through TOAD and OEM, I can connect to my database @ command line.
I tried all the possible ways.
I am tired now, can you please tel me a suggestion to get rid of this problem. Is that necessary to format the server and recreate the database using a backup if there is no option.
Please reply me asap as i need to load some flat files in database using TOAD.
Waiting for you response
Thanks,
Rajini.VHi All,
I have resolved this issue,I don't know if this is the best way or not.
I have reinstalled the database and Imported the latest backup in to the database and it was working fine.
later i got one error saying that datafile is missing for sysaux tablespace and needs recovery usings archives.
I lost all my archive files where i cannot recover the missing datafile.
\again my headache started ....................
I again created the brand new database and created the tablespaces which are additional to the default tablespaces that are created when database is created and imported the latest backup file in to new database.
this solved my problem.
Please let me know your advice on this.
Thanks,
Rajini. -
getting out of range on video when installing Windows 2003, right when it says starting windows GUi for the first time, no way in bios to turn resoultion down, tried setting S/W bios memory hole enabled. Please help I have 6 of these beast to do.
Hello Lewis. It sounds to me that the problem is between Windows and your monitor, not the BIOS. Usually, an 'out of range' message from the monitor indicates that either the horizontal or vertical frequency being used by the software (Windows) is beyond that your monitor can handle.
This is usually caused by improper initial detection by Windows, or the wrong parameters input during installation. If you have a plug-n-play monitor (which I'm assuming), Windows should easily poll the monitor for specifics and make base settings accordingly. Usually this works fine.
I recommend you bring up the system in Safe Mode, and make settings adjustments. If your particular monitor is not matched properly in Windows (it does not contain explicit model information), you will have to hand-enter the particulars. The best way to go about doing this is to first set it up as a medium resolution VESA standard type, say at 800x600x256 colors. Reboot the system normally, and make changes and adjustments once running the GUI, which you can save or back-out from.
Let me know how you make out with this, pm.. -
11.5.10.2 Installation on windows 2003 server Cygwin Software.
Hi
I used Cygwin instead of Mks tool kit in apps 11i(11.5.10.2) on windows 2003 server. Installation is completed succefully. I am able to open the forms without error. But while patching I am facing problem. for testing the Cygwin implementation I tried to relink FND programs. I got the error the error message is as follows.
set EnvAdrelink:Error:Cannot Open registry key: \SOFTWARE\ORACLE
aiosp2() Error: failure in usdspn()
contents of error buffer are:
"usdsop cannot create a new process
cause: usdsop encountered an error creating a new process. [Reason].
Can anybody help me the process.
Regards,
chennus.
Edited by: chennus on May 28, 2012 2:01 PMHi Saawan,
Now I format the system and Installed fresh application 11i(11.5.10.2) on windows 2003 EE.Now I select the prerequest software as visualstudio 2008 Express Edition and VC++6.0 redistributable package x86 (Doc ID 1095124.1), Mks toolkit I used 8.1 version and Gnumake I used 3.78.1(Doc ID 268776.1). The Installation is completed Successfully. The application is working fine. While i want to test the adrelink using adadmin I got the following error. adrelink is completed with status 1 and it is completely exit ( Not finished the script and come to command prompt) Here i am enclosing the adrelink log file.
You are running adrelink, version 115.14.11586.3
Start of adrelink session
Date/time is Tue May 29 16:55:24 IST 2012
Log file is E:/oracle/prodappl/admin/PROD/log/adrelink.log
Command line arguments are
"force=n" "ranlib=y" "link_debug=n" "filelist=E:/oracle/prodappl/admin/PROD/out/alkfnd000.txt"
Operating System Information (output of 'uname -a'):
Windows_NT TEST 5 02 586
Backup Mode is "file"
Removing Application products' bin directories from PATH ...
Done removing Application products' bin directories from PATH
Removing $FND_TOP/$APPLBIN from PATH ...
Done removing $FND_TOP/$APPLBIN from PATH
ORACLE RDBMS Version 8.0.6.0.0
Oracle Reports Version 6.0
Oracle Applications Release 11
Current product is AD
LADLIB is set to E:/oracle/prodappl/ad/11.5.0/lib/adst.lib
LADSTLIB is set to E:/oracle/prodappl/ad/11.5.0/lib/adst.lib
Current product is ALR
LALRLIB is set to E:/oracle/prodappl/alr/11.5.0/lib/alrst.lib
LALRSTLIB is set to E:/oracle/prodappl/alr/11.5.0/lib/alrst.lib
LALR115WLIB is set to E:/oracle/prodappl/alr/11.5.0/lib/ALR115W.lib
Current product is AP
LAPLIB is set to E:/oracle/prodappl/ap/11.5.0/lib/AP.lib
LAPSTLIB is set to E:/oracle/prodappl/ap/11.5.0/lib/apst.lib
Current product is AR
LARLIB is set to E:/oracle/prodappl/ar/11.5.0/lib/AR.lib
LARSRW is set to E:/oracle/prodappl/ar/11.5.0/lib/xirar.obj $(LARLIB)
LARSTLIB is set to E:/oracle/prodappl/ar/11.5.0/lib/arst.lib
Current product is AS
LASLIB is set to E:/oracle/prodappl/as/11.5.0/lib/asst.lib
LASSTLIB is set to E:/oracle/prodappl/as/11.5.0/lib/asst.lib
LAS115WLIB is set to E:/oracle/prodappl/as/11.5.0/lib/AS115W.lib
Current product is AX
LAXLIB is set to E:/oracle/prodappl/ax/11.5.0/lib/axst.lib
LAXSTLIB is set to E:/oracle/prodappl/ax/11.5.0/lib/axst.lib
Current product is BOM
LBOMLIB is set to E:/oracle/prodappl/bom/11.5.0/lib/BOM.lib
LBOMSTLIB is set to E:/oracle/prodappl/bom/11.5.0/lib/bomst.lib
Current product is CRP
LCRPLIB is set to E:/oracle/prodappl/crp/11.5.0/lib/CRP.lib
LCRPSTLIB is set to E:/oracle/prodappl/crp/11.5.0/lib/crpst.lib
Current product is CUA
LCUALIB is set to E:/oracle/prodappl/cua/11.5.0/lib/cuast.lib
LCUASTLIB is set to E:/oracle/prodappl/cua/11.5.0/lib/cuast.lib
Current product is CZ
LCZLIB is set to E:/oracle/prodappl/cz/11.5.0/lib/czst.lib
LCZSTLIB is set to E:/oracle/prodappl/cz/11.5.0/lib/czst.lib
Current product is DT
LDTLIB is set to E:/oracle/prodappl/dt/11.5.0/lib/dtst.lib
LDTSTLIB is set to E:/oracle/prodappl/dt/11.5.0/lib/dtst.lib
LDT115WLIB is set to E:/oracle/prodappl/dt/11.5.0/lib/DT115W.lib
Current product is ENG
LENGLIB is set to E:/oracle/prodappl/eng/11.5.0/lib/ENG.lib
LENGSTLIB is set to E:/oracle/prodappl/eng/11.5.0/lib/engst.lib
LENG115WLIB is set to E:/oracle/prodappl/eng/11.5.0/lib/ENG115W.lib
Current product is FA
LFALIB is set to E:/oracle/prodappl/fa/11.5.0/lib/fast.lib
LFASRW is set to E:/oracle/prodappl/fa/11.5.0/lib/xirfa.obj $(LFALIB)
LFASTLIB is set to E:/oracle/prodappl/fa/11.5.0/lib/fast.lib
LFA115WLIB is set to E:/oracle/prodappl/fa/11.5.0/lib/FA115W.lib
Current product is FEM
adrelink: Warning: not setting LFEMLIB
since E:/oracle/prodappl/fem/11.5.0/lib/femst.lib does not exist
or cannot be read.
adrelink: Warning: not setting LFEMSTLIB
since E:/oracle/prodappl/fem/11.5.0/lib/femst.lib does not exist
or cannot be read.
Current product is FF
LFFLIB is set to E:/oracle/prodappl/ff/11.5.0/lib/FF.lib
LFFSTLIB is set to E:/oracle/prodappl/ff/11.5.0/lib/ffst.lib
LFF115WLIB is set to E:/oracle/prodappl/ff/11.5.0/lib/FF115W.lib
Current product is FND
LFNDLIB is set to E:/oracle/prodappl/fnd/11.5.0/lib/FNDCORE.lib
LFNDSRW is set to E:/oracle/prodappl/fnd/11.5.0/lib/xirfnd.obj $(LFNDLIB)
LFNDSTLIB is set to E:/oracle/prodappl/fnd/11.5.0/lib/fndst.lib
LFND115WLIB is set to E:/oracle/prodappl/fnd/11.5.0/lib/FND115W.lib
LFNDCORELIB is set to E:/oracle/prodappl/fnd/11.5.0/lib/FNDCORE.lib
LFNDXITLIB is set to E:/oracle/prodappl/fnd/11.5.0/lib/FNDXIT.lib
LAPPR60UELIB is set to E:/oracle/prodappl/fnd/11.5.0/lib/APPR60UE.lib
Current product is GL
LGLLIB is set to E:/oracle/prodappl/gl/11.5.0/lib/GL.lib
LGLSTLIB is set to E:/oracle/prodappl/gl/11.5.0/lib/glst.lib
LGL115WLIB is set to E:/oracle/prodappl/gl/11.5.0/lib/GL115W.lib
Current product is GMA
LGMALIB is set to E:/oracle/prodappl/gma/11.5.0/lib/gmast.lib
LGMASTLIB is set to E:/oracle/prodappl/gma/11.5.0/lib/gmast.lib
LOPM115WLIB is set to E:/oracle/prodappl/gma/11.5.0/lib/OPM115W.lib
Current product is GMD
LGMDLIB is set to E:/oracle/prodappl/gmd/11.5.0/lib/gmdst.lib
LGMDSTLIB is set to E:/oracle/prodappl/gmd/11.5.0/lib/gmdst.lib
Current product is GME
LGMELIB is set to E:/oracle/prodappl/gme/11.5.0/lib/gmest.lib
LGMESTLIB is set to E:/oracle/prodappl/gme/11.5.0/lib/gmest.lib
Current product is GMF
LGMFLIB is set to E:/oracle/prodappl/gmf/11.5.0/lib/gmfst.lib
LGMFSTLIB is set to E:/oracle/prodappl/gmf/11.5.0/lib/gmfst.lib
Current product is GMI
LGMILIB is set to E:/oracle/prodappl/gmi/11.5.0/lib/gmist.lib
LGMISTLIB is set to E:/oracle/prodappl/gmi/11.5.0/lib/gmist.lib
Current product is GML
LGMLLIB is set to E:/oracle/prodappl/gml/11.5.0/lib/gmlst.lib
LGMLSTLIB is set to E:/oracle/prodappl/gml/11.5.0/lib/gmlst.lib
Current product is GMP
LGMPLIB is set to E:/oracle/prodappl/gmp/11.5.0/lib/gmpst.lib
LGMPSTLIB is set to E:/oracle/prodappl/gmp/11.5.0/lib/gmpst.lib
Current product is IBY
LIBYLIB is set to E:/oracle/prodappl/iby/11.5.0/lib/ibyst.lib
LIBYSTLIB is set to E:/oracle/prodappl/iby/11.5.0/lib/ibyst.lib
Current product is INV
LINVLIB is set to E:/oracle/prodappl/inv/11.5.0/lib/INV.lib
LINVSTLIB is set to E:/oracle/prodappl/inv/11.5.0/lib/invst.lib
LINV115WLIB is set to E:/oracle/prodappl/inv/11.5.0/lib/INV115W.lib
Current product is MRP
LMRPLIB is set to E:/oracle/prodappl/mrp/11.5.0/lib/MRP.lib
LMRPSTLIB is set to E:/oracle/prodappl/mrp/11.5.0/lib/mrpst.lib
Current product is MSC
LMSCLIB is set to E:/oracle/prodappl/msc/11.5.0/lib/mscst.lib
LMSCSTLIB is set to E:/oracle/prodappl/msc/11.5.0/lib/mscst.lib
Current product is MSO
LMSOLIB is set to E:/oracle/prodappl/mso/11.5.0/lib/msost.lib
LMSOSTLIB is set to E:/oracle/prodappl/mso/11.5.0/lib/msost.lib
Current product is MSR
LMSRLIB is set to E:/oracle/prodappl/msr/11.5.0/lib/msrst.lib
LMSRSTLIB is set to E:/oracle/prodappl/msr/11.5.0/lib/msrst.lib
Current product is MST
LMSTLIB is set to E:/oracle/prodappl/mst/11.5.0/lib/mstst.lib
LMSTSTLIB is set to E:/oracle/prodappl/mst/11.5.0/lib/mstst.lib
Current product is MWA
LMWALIB is set to E:/oracle/prodappl/mwa/11.5.0/lib/mwast.lib
LMWASTLIB is set to E:/oracle/prodappl/mwa/11.5.0/lib/mwast.lib
Current product is PA
LPALIB is set to E:/oracle/prodappl/pa/11.5.0/lib/past.lib
LPASTLIB is set to E:/oracle/prodappl/pa/11.5.0/lib/past.lib
Current product is PAY
LPAYLIB is set to E:/oracle/prodappl/pay/11.5.0/lib/payst.lib
LPAYSTLIB is set to E:/oracle/prodappl/pay/11.5.0/lib/payst.lib
LPAY115WLIB is set to E:/oracle/prodappl/pay/11.5.0/lib/PAY115W.lib
Current product is PO
LPOLIB is set to E:/oracle/prodappl/po/11.5.0/lib/PO.lib
LPOSRW is set to E:/oracle/prodappl/po/11.5.0/lib/xirpo.obj $(LPOLIB)
LPOSTLIB is set to E:/oracle/prodappl/po/11.5.0/lib/post.lib
LPO115WLIB is set to E:/oracle/prodappl/po/11.5.0/lib/PO115W.lib
Current product is PON
adrelink: Warning: not setting LPONLIB
since E:/oracle/prodappl/pon/11.5.0/lib/ponst.lib does not exist
or cannot be read.
adrelink: Warning: not setting LPONSTLIB
since E:/oracle/prodappl/pon/11.5.0/lib/ponst.lib does not exist
or cannot be read.
Current product is RG
LRGLIB is set to E:/oracle/prodappl/rg/11.5.0/lib/rgst.lib
LRGSTLIB is set to E:/oracle/prodappl/rg/11.5.0/lib/rgst.lib
Current product is WIP
LWIPLIB is set to E:/oracle/prodappl/wip/11.5.0/lib/WIP.lib
LWIPSTLIB is set to E:/oracle/prodappl/wip/11.5.0/lib/wipst.lib
LWIP115WLIB is set to E:/oracle/prodappl/wip/11.5.0/lib/WIP115W.lib
Current product is WPS
LWPSLIB is set to E:/oracle/prodappl/wps/11.5.0/lib/wpsst.lib
LWPSSTLIB is set to E:/oracle/prodappl/wps/11.5.0/lib/wpsst.lib
Current product is WSM
LWSMLIB is set to E:/oracle/prodappl/wsm/11.5.0/lib/wsmst.lib
LWSMSTLIB is set to E:/oracle/prodappl/wsm/11.5.0/lib/wsmst.lib
Current product is XDP
LXDPLIB is set to E:/oracle/prodappl/xdp/11.5.0/lib/xdpst.lib
LXDPSTLIB is set to E:/oracle/prodappl/xdp/11.5.0/lib/xdpst.lib
LUSRLIB is
Not linking Oracle Applications with any Oracle mail product
LALRSTUB is now set to E:/oracle/prodappl/alr/11.5.0/lib/alstub.obj
MAILLNK is now set to E:/oracle/prodappl/alr/11.5.0/lib/alstub.obj
Creating prefix makefiles ...
Done creating prefix makefiles
The file E:/oracle/prodappl/admin/PROD/out/alkfnd000.txt contains:
E:\oracle\prodappl\fnd\11.5.0\bin\ADCONV.exe fnd bin ADCONV.exe
E:\oracle\prodappl\fnd\11.5.0\bin\AFTBLGEN.exe fnd bin AFTBLGEN.exe
E:\oracle\prodappl\fnd\11.5.0\bin\APPR60UE.dll fnd bin APPR60UE.dll
E:\oracle\prodappl\fnd\11.5.0\bin\ar60rund.exe fnd bin ar60rund.exe
E:\oracle\prodappl\fnd\11.5.0\bin\CCMSETUP.exe fnd bin CCMSETUP.exe
E:\oracle\prodappl\fnd\11.5.0\bin\CCMSVC.exe fnd bin CCMSVC.exe
E:\oracle\prodappl\fnd\11.5.0\bin\CMDCART.dll fnd bin CMDCART.dll
E:\oracle\prodappl\fnd\11.5.0\bin\CONCSUB.exe fnd bin CONCSUB.exe
E:\oracle\prodappl\fnd\11.5.0\bin\fdfcmp.exe fnd bin fdfcmp.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FDULONG.exe fnd bin FDULONG.exe
E:\oracle\prodappl\fnd\11.5.0\bin\flint60.exe fnd bin flint60.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FND115W.dll fnd bin FND115W.dll
E:\oracle\prodappl\fnd\11.5.0\bin\FNDAQCT.exe fnd bin FNDAQCT.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDATUPD.exe fnd bin FNDATUPD.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDCORE.dll fnd bin FNDCORE.dll
E:\oracle\prodappl\fnd\11.5.0\bin\FNDCPASS.exe fnd bin FNDCPASS.exe
E:\oracle\prodappl\fnd\11.5.0\bin\fndcpesr.exe fnd bin fndcpesr.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDCPGLC.exe fnd bin FNDCPGLC.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDCPPUR.exe fnd bin FNDCPPUR.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDCPRRF.exe fnd bin FNDCPRRF.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDCPSPN.exe fnd bin FNDCPSPN.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDCPTST.exe fnd bin FNDCPTST.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDCPUCF.exe fnd bin FNDCPUCF.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDCRM.exe fnd bin FNDCRM.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDDWPUR.exe fnd bin FNDDWPUR.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDEMON.exe fnd bin FNDEMON.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDFBPLS.exe fnd bin FNDFBPLS.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDFBUPG.exe fnd bin FNDFBUPG.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDFFCHY.exe fnd bin FNDFFCHY.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDFFRXR.exe fnd bin FNDFFRXR.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDFFUPG.exe fnd bin FNDFFUPG.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDFFVGN.exe fnd bin FNDFFVGN.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDFS.exe fnd bin FNDFS.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDGFH.exe fnd bin FNDGFH.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDGFU.exe fnd bin FNDGFU.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDIMON.exe fnd bin FNDIMON.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDLIBR.exe fnd bin FNDLIBR.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDLOAD.exe fnd bin FNDLOAD.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDLOADSO.exe fnd bin FNDLOADSO.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDMDCVT.exe fnd bin FNDMDCVT.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDMDGEN.exe fnd bin FNDMDGEN.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDPRESC.exe fnd bin FNDPRESC.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDPSTAX.exe fnd bin FNDPSTAX.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDRCLC.exe fnd bin FNDRCLC.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDRCLS.exe fnd bin FNDRCLS.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDRTR45.exe fnd bin FNDRTR45.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDSCH.exe fnd bin FNDSCH.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDSLOAD.exe fnd bin FNDSLOAD.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDSM.exe fnd bin FNDSM.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDSVCRG.exe fnd bin FNDSVCRG.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDTMTST.exe fnd bin FNDTMTST.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDWRR.exe fnd bin FNDWRR.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDXIT.dll fnd bin FNDXIT.dll
E:\oracle\prodappl\fnd\11.5.0\bin\OAMKSVC.exe fnd bin OAMKSVC.exe
E:\oracle\prodappl\fnd\11.5.0\bin\WFLOAD.exe fnd bin WFLOAD.exe
E:\oracle\prodappl\fnd\11.5.0\bin\WFMAIL.exe fnd bin WFMAIL.exe
E:\oracle\prodappl\fnd\11.5.0\bin\WFMLRGSM.exe fnd bin WFMLRGSM.exe
E:\oracle\prodappl\fnd\11.5.0\bin\WFMLRXFR.exe fnd bin WFMLRXFR.exe
E:\oracle\prodappl\fnd\11.5.0\bin\WFRESGEN.exe fnd bin WFRESGEN.exe
E:\oracle\prodappl\fnd\11.5.0\bin\WFTEST.exe fnd bin WFTEST.exe
Creating import libraries for FND
Creating import library APPR60UE.lib on Tue May 29 16:57:01 IST 2012
[1] + Done(134) ?
4008 Abort gnumake
Creating import library APPR60UE.lib failed on Tue May 29 16:57:01 IST 2012
See error messages above
Creating import library CMDCART.lib on Tue May 29 16:57:02 IST 2012
[1] + Done(134) ?
3968 Abort gnumake
Creating import library CMDCART.lib failed on Tue May 29 16:57:02 IST 2012
See error messages above
Creating import library FND115W.lib on Tue May 29 16:57:03 IST 2012
[1] + Done(134) ?
5076 Abort gnumake
Creating import library FND115W.lib failed on Tue May 29 16:57:03 IST 2012
See error messages above
Creating import library FNDCORE.lib on Tue May 29 16:57:04 IST 2012
[1] + Done(134) ?
2904 Abort gnumake
Creating import library FNDCORE.lib failed on Tue May 29 16:57:04 IST 2012
See error messages above
Creating import library FNDXIT.lib on Tue May 29 16:57:05 IST 2012
[1] + Done(134) ?
5440 Abort gnumake
Creating import library FNDXIT.lib failed on Tue May 29 16:57:05 IST 2012
See error messages above
Starting link of product 'fnd' on Tue May 29 16:57:06 IST 2012
Current product is fnd
Current product TOP is $FNDTOP
Current prodarea is E:/oracle/prodappl/fnd/11.5.0
Relinking module 'ADCONV.exe' in product fnd ...
gnumake -f E:/oracle/prodappl/admin/PROD/out/link_fnd_6076.mk E:/oracle/prodappl/fnd/11.5.0/bin/ADCONV.exe
Starting link of fnd executable 'ADCONV.exe' on Tue May 29 16:57:14 IST 2012
[1] + Done(134) ?
2700 Abort gnumake
Done with link of fnd executable 'ADCONV.exe' on Tue May 29 16:57:14 IST 2012
Relink of module "ADCONV.exe" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory E:/oracle/prodappl/fnd/11.5.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'AFTBLGEN.exe' in product fnd ...
gnumake -f E:/oracle/prodappl/admin/PROD/out/link_fnd_6076.mk E:/oracle/prodappl/fnd/11.5.0/bin/AFTBLGEN.exe
Starting link of fnd executable 'AFTBLGEN.exe' on Tue May 29 16:57:15 IST 2012
[1] + Done(134) ?
4612 Abort gnumake
Done with link of fnd executable 'AFTBLGEN.exe' on Tue May 29 16:57:15 IST 2012
Relink of module "AFTBLGEN.exe" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory E:/oracle/prodappl/fnd/11.5.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'APPR60UE.dll' in product fnd ...
creating the temp directory
mkdir temp
changing permissions for the temp directory
chmod 777 temp
Getting the object file names for this APPR60UE.dll
gnumake -f E:/oracle/prodappl/admin/PROD/out/link_fnd_6076.mk appr60ue.LIST
Extracting objects from the library
ar -xv -F coff E:/oracle/prodappl/fnd/11.5.0/lib/fndst.lib
x - fdfffu.obj
x - fdffile.obj
x - fdffld.obj
x - fdffvs.obj
x - fdfgcx.obj
x - fdfgli.obj
x - fdfkba.obj
x - fdfkbe.obj
x - fdfkbp.obj
x - fdfkbr.obj
x - fdfkbt.obj
x - fdfkds.obj
x - fdfkfu.obj
x - fdfkfu2.obj
x - fdfksr.obj
x - fdfkva.obj
x - fdflist.obj
x - fdflop.obj
x - fdfobj.obj
x - fdfrfu.obj
x - fdfsdf.obj
x - fdfsrw.obj
x - fdfstr.obj
x - fdftdu.obj
x - fdfupu.obj
x - afdcpm.obj
x - afdfrm.obj
x - afdgfn.obj
x - afdict.obj
x - afdsil.obj
x - afdsrw.obj
x - afdtmp.obj
x - afdwin.obj
x - afpatn.obj
x - afpcmn.obj
x - afpcra.obj
x - afpcsq.obj
x - afpdon.obj
x - afpeim.obj
x - afpejp.obj
x - afperq.obj
x - afpgmg.obj
x - afpi.obj
x - afpiml.obj
x - afplog.obj
x - afpo.obj
x - afppcp.obj
x - afppqs.obj
x - afpprc.obj
x - afpprn.obj
x - fdssgn.obj
x - fdssoa.obj
x - fdugci.obj
x - fdusql.obj
x - fdxidk.obj
x - fdxml.obj
x - fdxsqk.obj
x - fdxver.obj
x - fpep.obj
x - usdsim.obj
x - wfcore.obj
x - wfdes.obj
x - wfldr.obj
x - wfldrf.obj
x - wfmlr.obj
x - wfmsiic.obj
x - wfmutil.obj
x - wfntf.obj
x - wfomgul.obj
x - wfrsp.obj
x - afpfs.obj
x - afpfsv.obj
x - afpgrq.obj
x - afpperl.obj
x - afppir.obj
x - afpprr.obj
x - afprul.obj
x - afpsm.obj
x - afpsmf.obj
x - afptmttp.obj
x - afpucf.obj
x - affile.obj
x - fdllov.obj
x - fdpevt.obj
x - fdpvwr.obj
x - fdsecp.obj
x - wfext.obj
x - wffile.obj
x - wfidx.obj
x - afmem.obj
x - afpcmt.obj
x - afpgri.obj
x - afpoval.obj
x - ccmrkey.obj
x - fdugwi.obj
x - fdxwho.obj
x - afslov.obj
x - ccmmndlg.obj
x - afixlh.obj
x - afixpic.obj
x - afixpmuu.obj
x - fdpemon.obj
x - afpgsr.obj
x - fdipth.obj
x - fdpibm.obj
x - fdpldr.obj
x - fdpstp.obj
x - fdpurq.obj
x - ccmppsht.obj
x - ccmsetup.obj
x - afdacc.obj
x - afpbwv.obj
x - afpcc.obj
x - afpflx.obj
x - afpcbidi.obj
x - stdafx.obj
x - afwsys.obj
x - afwpal.obj
x - afwind.obj
x - afwgeo.obj
x - afwevt.obj
x - afwdev.obj
x - afvpa.obj
x - afvca.obj
x - afvbt.obj
x - fduxit.obj
x - fduuid.obj
x - fdutkn.obj
x - fduopr.obj
x - fduli.obj
x - fdugii.obj
x - fducsq.obj
x - fdndbc.obj
x - fdfile.obj
x - fdarux.obj
x - afuddl.obj
x - xitdwp.obj
x - xitdus.obj
x - xitdsp.obj
x - xitdsa.obj
x - xitdrg.obj
x - xitdra.obj
x - xitdpy.obj
x - xitdpr.obj
x - xitdpo.obj
x - xitdpa.obj
x - xitdoe.obj
x - xitdmp.obj
x - xitdmf.obj
x - xitdin.obj
x - xitdgmz.obj
x - xitdgms.obj
x - xitdgmr.obj
x - xitdgmp.obj
x - xitdgmo.obj
x - xitdgml.obj
x - xitdgmi.obj
x - xitdgme.obj
x - xitdgmd.obj
x - xitdgma.obj
x - xitdgl.obj
x - xitdff.obj
x - xitdfa.obj
x - xitden.obj
x - xitddt.obj
x - xitdcs.obj
x - xitdcp.obj
x - xitdbm.obj
x - xitdax.obj
x - xitdas.obj
x - xitdar.obj
x - xitdap.obj
x - xitdal.obj
x - alroms.obj
x - xirnop.obj
x - fdxsqr.obj
x - fdxnls.obj
x - fdxidr.obj
x - fdxext.obj
x - fdxdcf.obj
x - fdxcls.obj
x - fdsxit.obj
x - fdsgtk.obj
x - fdsarg.obj
x - afpvpc.obj
x - afptmc.obj
x - fdxwrk.obj
x - fdxutl.obj
x - fdxuar.obj
x - fdxtrc.obj
x - fdxtmr.obj
x - fdxsql.obj
x - fdxsqf.obj
x - fdxqus.obj
x - fdxpst.obj
x - fdxprf.obj
x - fdxpii.obj
x - fdxmc.obj
x - fdxlcs.obj
x - fdxkmd.obj
x - fdxgvl.obj
x - fdxfil.obj
x - fdxdsp.obj
x - fdxdat.obj
x - fdxapp.obj
x - fdwask.obj
x - fdptmx.obj
x - fdpscm.obj
x - fdpgcf.obj
x - fdefil.obj
x - afwkflw.obj
x - afwaol.obj
x - aforg.obj
x - afoleaut.obj
x - afmsg.obj
x - afifld.obj
x - afglpw.obj
x - afgldbs.obj
x - afgbox.obj
x - fdssvl.obj
x - fdssuq.obj
x - fdsssk.obj
x - fdssck.obj
x - fdsctl.obj
x - fdsaud.obj
x - fdstkt.obj
x - fdrutl.obj
x - fdrfcmp.obj
x - fdrcmp.obj
x - afpoux.obj
x - usdins.obj
x - fpeb.obj
x - fpe.obj
x - fdutim.obj
x - fduprn.obj
x - fducst.obj
x - fdrpbf.obj
x - fdpsra.obj
x - fdpsqp.obj
x - fdpsps.obj
x - fdpsbm.obj
x - fdpsar.obj
x - fdprst.obj
x - fdprpt.obj
x - fdprlk.obj
x - fdprhl.obj
x - fdpreq.obj
x - fdprcp.obj
x - fdppev.obj
x - fdppbr.obj
x - fdpmst.obj
x - fdplnk.obj
x - fdpimp.obj
x - fdphbe.obj
x - fdpfqr.obj
x - fdperi.obj
x - fdpdf.obj
x - fdpdbg.obj
x - fdpdbf.obj
x - fdpcrc.obj
x - fdpccr.obj
x - fdpbq.obj
x - fdpblf.obj
x - fdowln.obj
x - fdomsg.obj
x - afuepp.obj
x - afpufe.obj
x - afptstp.obj
x - afptmi.obj
x - afprun.obj
x - afpops.obj
x - afpgrs.obj
x - afpgpr.obj
x - afpgip.obj
x - afpdpo.obj
x - afpdbg.obj
x - afpcrs.obj
x - afpcat.obj
x - afe.obj
x - usdxit.obj
x - usdwin.obj
x - usdtec.obj
x - usdstub.obj
x - usdpar.obj
x - usdos2.obj
x - usdoaut.obj
x - usdmpe.obj
x - usdmac.obj
x - usdhtml.obj
x - usdgpa.obj
x - usdfmv.obj
x - usdccf.obj
x - spnvms.obj
x - spnos2.obj
x - spnmpe.obj
x - spnmac.obj
x - spndos.obj
x - gmalloc.obj
x - aftimr.obj
x - afhtmhlp.obj
x - fdumod.obj
x - fduhex.obj
x - fdueds.obj
x - fdnwsc.obj
x - afutim.obj
x - afust.obj
x - afusc.obj
x - afulzw.obj
x - afugli.obj
x - aftime.obj
x - afmath.obj
x - afctx.obj
x - afcore.obj
x - aflutl.obj
x - afdrsc.obj
x - afdrrt.obj
x - afdrdb.obj
x - afdf.obj
x - fdndcf.obj
x - afdcx.obj
x - fdahmi.obj
x - fdacon.obj
x - afufld.obj
x - afsfld.obj
x - afprcl.obj
x - afpolg.obj
x - afpmir.obj
x - fdxefv.obj
x - fdssop.obj
x - afpscg.obj
x - usdnt.obj
x - fdugpi.obj
x - fdudat.obj
x - fdsnxt.obj
x - fdsgbl.obj
x - fdhhlp.obj
x - flutil.obj
x - flup.obj
x - fllog.obj
x - flglob.obj
x - fldisp.obj
x - fldb.obj
x - flada.obj
x - afppio.obj
x - afpdlk.obj
x - afgfhdoc.obj
x - affntrep.obj
x - afcharrp.obj
x - wfresg.obj
x - cregkey.obj
x - ccmsvc.obj
x - afttflib.obj
x - afttf2t3.obj
x - afpspt.obj
x - afpfsc.obj
x - afixust.obj
x - afixube.obj
x - afixft.obj
x - afixfs.obj
x - affntgen.obj
x - ccmsssvc.obj
x - afuprt.obj
x - afstr.obj
x - afpsmg.obj
x - wfres.obj
x - wfomgucn.obj
x - wfms.obj
x - afpesa.obj
x - afpeot.obj
x - afpdwpur.obj
x - afpcal.obj
x - aflog.obj
x - afixupgn.obj
x - afixucf.obj
x - afixpm.obj
x - afixfsb.obj
x - affntlst.obj
x - afenv.obj
x - afcs2uni.obj
x - fddxit.obj
x - fdcpspn.obj
x - fdaupd.obj
x - fdatat.obj
x - fdastr.obj
x - fdacv.obj
x - ccmupi.obj
x - ccmsup.obj
x - ccmoptpg.obj
x - afugai.obj
x - afsxss.obj
x - afshape.obj
x - afscp.obj
x - fdpwrt.obj
x - fdpperl.obj
x - fdpmbr.obj
x - fdparg.obj
x - fdnlng.obj
x - fdmenu.obj
x - fdidrv.obj
x - fdspwd.obj
x - fdffds.obj
x - fdffbu.obj
x - fdfdvu.obj
x - fdfdtj.obj
x - fdfdfu.obj
x - fdfdds.obj
x - fdfdbg.obj
x - fdfcom.obj
x - fdfchy.obj
x - fdfbtr.obj
x - fdfbpl.obj
x - fdfapi.obj
x - ccmsvcpg.obj
x - afwlib.obj
x - afupi.obj
x - afubtree.obj
x - afsys.obj
x - afspc.obj
x - afptm.obj
x - afpsrs.obj
x - afpsmc.obj
x - afpsgc.obj
x - afpsec.obj
x - afppur.obj
x - afpprq.obj
x - usdspid.obj
x - spnunx.obj
x - spnnt.obj
x - fdsrsp.obj
x - fdptls.obj
x - fdpsql.obj
x - fdprrc.obj
x - fdprmo.obj
x - fdprep.obj
x - fdpprn.obj
x - fdplbr.obj
x - fdpgrq.obj
x - fdisqf.obj
x - fdfwtk.obj
x - fdfwrt.obj
x - fdfwmsg.obj
x - fdfwin.obj
x - fdfwfld.obj
x - fdfweb.obj
x - fdfvsu.obj
x - fdfvgn.obj
x - fdfval.obj
x - fdfutl.obj
Creating temporary function list, if required.
echo
gnumake -f E:/oracle/prodappl/admin/PROD/out/link_fnd_6076.mk E:/oracle/prodappl/fnd/11.5.0/bin/APPR60UE.dll
Starting link of fnd executable 'APPR60UE.dll' on Tue May 29 16:57:16 IST 2012
[1] + Done(134) ?
4804 Abort gnumake
Done with link of fnd executable 'APPR60UE.dll' on Tue May 29 16:57:16 IST 2012
Relink of module "APPR60UE.dll" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory E:/oracle/prodappl/fnd/11.5.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'CCMSETUP.exe' in product fnd ...
gnumake -f E:/oracle/prodappl/admin/PROD/out/link_fnd_6076.mk E:/oracle/prodappl/fnd/11.5.0/bin/CCMSETUP.exe
Starting link of fnd executable 'CCMSETUP.exe' on Tue May 29 16:57:17 IST 2012
[1] + Done(134) ?
4792 Abort gnumake
Done with link of fnd executable 'CCMSETUP.exe' on Tue May 29 16:57:17 IST 2012
Relink of module "CCMSETUP.exe" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory E:/oracle/prodappl/fnd/11.5.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'CCMSVC.exe' in product fnd ...
gnumake -f E:/oracle/prodappl/admin/PROD/out/link_fnd_6076.mk E:/oracle/prodappl/fnd/11.5.0/bin/CCMSVC.exe
Starting link of fnd executable 'CCMSVC.exe' on Tue May 29 16:57:17 IST 2012
[1] + Done(134) ?
3556 Abort gnumake
Done with link of fnd executable 'CCMSVC.exe' on Tue May 29 16:57:17 IST 2012
Relink of module "CCMSVC.exe" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory E:/oracle/prodappl/fnd/11.5.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'CMDCART.dll' in product fnd ...
Removing any existing temp directory
rm -rf temp
rm: cannot remove directory "temp": The process cannot access the file because it is being used by another process.
E:/oracle/prodappl/fnd/11.5.0/lib/temp directory exists and
cannot be cleaned up. Please remove this directory
and restart the process.
adrelink is exiting with status 1
End of adrelink session
Date/time is Tue May 29 16:57:18 IST 2012
********************************************************** -
Directory services and windows 2003
hello all i am new to the world of solaris. So the trouble is that we have a sunfire and i installed directory services 5.2 but windows 2003 refuse to join the domain at all... the sunfire box is in nat and there's an entry in the nat dns server. the question is: is it really possible for a win box to join the solaris ds? or only other solaris boxes can do it?
Dear Andreas:
I have read that:
Hello together,
I think I've got a solution for my
Real-Time-LDAP-Password-Check. T was right there is a BSA package,
which exectly do this but it is not available through the website
or any download.
For this you don't need a NTLM Server running or a reverse
proxy for user authentication. It simply checks over the LDAP port
to your LDAP server and
returns if the login is granted through the LDAP password ior
not.
Yesterday I spoke to a Breeze dev. and he sent me these
scripts. He said they will be already implemented into the next
Breeze version but will also work with Breeze 6.
When some is interested in this solution please send me pm
with your email adress and I will send the zip file to you.
Regards,
Andreas
We are an spanish company specilized in developing PDF forms
and other type of applications and also involved with Adobe,
specially in Connect.
I will appreciate if you can send me the zip file to solve
the LDAP question.
My email is [email protected]
Thanks in advance.
Desirée -
Schedule and windows 2003 "net use"
ver 10.2.0.2
lastest patch 9
windows 2003
trying to get the scheduler to work with a batch file that uses NET USE etc..
for ex
net use q: \\workstation\sharename mypass /user:domain_admin
I have tried to put this in a BATCH file
begin
dbms_scheduler.drop_job('t1');
dbms_scheduler.purge_log;
dbms_scheduler.create_job
('t1',
job_action=>'C:\WINDOWS\system32\cmd.exe',
number_of_arguments=>3,
job_type=>'executable',
enabled=>false,
auto_drop=>false);
dbms_scheduler.set_job_argument_value('t1',1,'/q');
dbms_scheduler.set_job_argument_value('t1',2,'/c');
dbms_scheduler.set_job_argument_value('t1',3,'e:\move_net\see.bat');
dbms_scheduler.enable('t1');
dbms_lock.sleep(3);
commit;
end;
pl/sql procedure successfully completed.
see.bat
net use q: \\workstation\sharename mypass /user:domain_admin
go into OEM
look at the job status: SUCCEEDED
look that the history find
Details STANDARD_ERROR="System error 1312 has occurred. A specified logon session does not exist. It may already have been terminated. The system cannot find the drive specified."
now I have look high and low in metalink..really did not see an answer.
I know what the answer is if I was on unix, but nothing on windows 2003
I have made sure i got all the rights to extjob.exe etc
I have change the job to reflect
1= /q
2=/c
3=c:\windows\system32\net.exe use q: \\workstation\share mypass /user:domain_admin
when i do this,
I get a new error
ORA-27369: job of type EXECUTABLE failed with exit code: The system cannot find the file specified. STANDARD_ERROR="System error 1312 has occurred. A specified logon session does not exist. It may already have been terminated. "
just wonder if anyone has used NET USE...
thanks
p-Hi,
Try to start OracleJobScheduler<SID> Windows service and try again.
Start->Run->services.msc
(This service is disabled by default) -
Windows 2008 MSCS, CRM 7.0 (Java + ABAP)
Hi there,
We are about to learn and build/Install SAP CRM 7.0 on Windows 2008 & Oracle 10g. As we know, CRM 7.0 JAVA and ABAP has to be a separate installation using SAPinst. Since our Hardware is well sized in-terms of Memory and CPU (32 GB and 8 Processors). We are planning to install ABAP and Java on the same server/host. However, SAP Installation guide says that
"NOTE MSCS only: Multiple Oracle Homes are not supported in an MSCS configuration". This mean we cannot install 2 Oracle homes (one for CRM ABAP and One for CRM Java). At the same time SAP also do not recommend MCOD (Installing Java as an Add-in to an existing ABAP existing Oracle Database).
What will happen if we decided to install a common Oracle Home, called (CRM) - and Make the Java and ABAP Separated installation to use the common oracle and Cluster the Oracle Database? Do you guys see any cons on this?
Can someone advice me please, on how do we go around above scenario (s) and Install ABAP and Java separate and Cluster the Oracle Database on Windows MSCS?
Any thoughts?
Thanks in Advance.
Kumar>
Kumar Subramaniam wrote:
> Hi there,
>
> We are about to learn and build/Install SAP CRM 7.0 on Windows 2008 & Oracle 10g. As we know, CRM 7.0 JAVA and ABAP has to be a separate installation using SAPinst. Since our Hardware is well sized in-terms of Memory and CPU (32 GB and 8 Processors). We are planning to install ABAP and Java on the same server/host. However, SAP Installation guide says that
> "NOTE MSCS only: Multiple Oracle Homes are not supported in an MSCS configuration". This mean we cannot install 2 Oracle homes (one for CRM ABAP and One for CRM Java). At the same time SAP also do not recommend MCOD (Installing Java as an Add-in to an existing ABAP existing Oracle Database).
>
> What will happen if we decided to install a common Oracle Home, called (CRM) - and Make the Java and ABAP Separated installation to use the common oracle and Cluster the Oracle Database? Do you guys see any cons on this?
>
> Can someone advice me please, on how do we go around above scenario (s) and Install ABAP and Java separate and Cluster the Oracle Database on Windows MSCS?
>
> Any thoughts?
>
> Thanks in Advance.
> Kumar
Hi Peter,
I have the same question, I'm not sure if I understand your last answer. On the document "Installation of Multiple SAP systems in MSCS Oracle" I can see, Multiple Oracle databases in MSCS are supported. On section "Installation" is describt the following:
later on is describt:
1. On all DB MSCS nodes, you install the Oracle database server software and the current patch set and hot fix (if available).
Note
- You must have one ORACLE_HOME per database instance on every cluster node on local disks.
- All ORACLE_HOMES must use the same disks and directories and ORACLE_HOME names on all DB MSCS nodes.
Now I saw on Peters answer - Multiple Oracle Home are not longer possible in MSCS on Windows 2008 - only for Windows 2008? What about Windows 2003? Does it mean, we can not install more then one database on the (MultiSID) MSCS cluster?
We want to install an SAP ME and SAP MII System in MSCS and to the same cluster two databases Instances with ODS and WIP schema.
Thanks in advanced,
Elke
(HP - SAP Global Partner) -
How to setup SMBX client for work with Windows 2003 server's shared folders?
Dear community,
Some folders within shared folder on Windows 2003 Server is not visible for MacOS 10.8 client.
How should I set up SMBX? Is there manual?
I know, there is simple solution to type exact pathname (with those invisible folders) in connection dialog, but it is not usefull for me.
Thank you in advanceHi,
Please remove the 3 non-exists DC from environment using the metadata clean-up process using script from below article. then manually delete the records from DNS management console as given below.
https://gallery.technet.microsoft.com/scriptcenter/d31f091f-2642-4ede-9f97-0e1cc4d577f3
Manual steps to clear the records.
Dnsmgmt.msc [Dns Management]
A.Expand the forward lookup zones\_msdcs folder
i. Make sure only the actual domain controllers are listed, delete wrong Alias recordsremove wrong name server records
ii. Select the container [forward lookup zones\_msdcs.domain.com\dc\_sites_\sitename\_tcp] > delete incorrect _ldap and _kerberos records are listed.
iii. Select the container [forward lookup zones\_msdcs.domain.com\dc\_tcp] and delete incorrect _ldap and _kerberos records
iv. Expand the [forward lookup zones\_msdcs.domain.com\domains\guid\_tcp] and delete incorrect _ldap entries
v. Select [forward lookup zones\_msdcs.domain.com\gc] – delete incorrect HostA records
vi. Expand the [forward lookup zones\_msdcs.domain.com\gc\_sites\sitename\_tcp] – delete incorrect _ldap entries
vii.Select the [forward lookup zones\_msdcs.domain.com\gc\_tcp] – delete incorrect _ldap entries
viii. Select the [forward lookup zones\_msdcs.domain.com\pdc\_tcp] – delete incorrect _ldap entries
B.Expand the forward lookup zones\domain.com folder
i.Delete Host(A) records of dc’s which are non-existant.
ii.Correct the NameServer (NS) records
iii. Follow steps similar to ’ A ii ‘ >> ‘ A viii’
· Dssite.msc [Sites and Services]
A.Expand the [Sites\Sitename\Servers] – delete incorrect server’s
B.Delete incorrect subnet configurations [Sites\Subnets]
C.Delete incorrect site links [Sites\IP]
· Make sure the domain controllers are pointing to the correct dns servers in tcp\ip settings.
· Force replication – ‘repadmin /syncall’ -
System Copy ECC6 -SR3 mssql windows 2003 32 bit to 64 bit
Hi Gurus,
We are planning for go for new hardware with 64 bit from 32 bit .please share your experince...and advice .
Landscape:(32 bit)
PRD -ABAP only (Ecc6 sr3 sp19) Mssql server /windows 2003 - CIDB2 apps server in seperate hosts. -150 GB DATA
QAS - ABAP+JAVA
DEV - ABAP only
Planing for New hardware 64 bit (same OS/DB) CI+ DB in One host and application servers in Another hosts. (Vmware )
gone through system copy documents .But not clear about the export option which we need to select from source systems.(abap (prd,dev) ,abap+java (qas)
sap recommend to go for database specific method.will there any issue if i selects Database indepedent method instead of Database specific method.
Appreciate if you would share your experience ....
Thanks in advanceDear Nicholas,
Thank you very much...helpfull answer .
Now we are planning for system copy of HA system -MSCS , could you please guide how to go for that.
PRD system - CI, DB ,APPS1,APPS2 on seperate servers with windows MSCS - Sap HA. Only abap stack.
Please advice how to prepare for this...
Also how to check installed sap is 64bit or 32 bit. is there any tcode for this..?
Thanks again .. -
Removing Windows 2003 Group Policy user settings
I'm having a difficult time finding what to do.
I have a windows 2003 domain with many GP settings. One of which I can't find. It has to do with the favorites bar in IE. When a user from a certain OU logs on to any computer with any Windows OS, any favorites saved either to their Favorites
bar, or even in the Favorites folder, disappear on next logon. This happens all the time.
I thought I would create another OU with a BLANK GP and blocked inheritance. I moved a user from the original OU into the test OU, replicated the changes, and rebooted the computer on which the user would log on. The user logged on and the settings
from the original OU still applied.
I created a completely new user in the test OU and no settings were applied, which is what I want.
What is the best way to remove the original OU settings from a user that was in that original OU?
Thank you for any helpThanks for the quick response. There are no scripts that run with the former GPO.
I did run RSOP.MSC from the test computer and received an error about not being able to read the computer settings, but the user settings were displayed. The settings the account received were from "Software Restriction Policy" and "Public
Key Policy". Nothing shows about any IE settings. I'm at a loss as to why this is happening and where these dang policies are coming from.
I've even gone as far as to go to the original GPO, and in Delegation, deny the Apply Group Policy permission to the user.
And the only policy that is applying is the test policy. The others show as either Disabled(link), or Blocked(SOM).
Maybe you are looking for
-
Itunes 10.5.3 update install errors on Windows
So if your getting errors when trying to update your Itunes software (say for instance to be able to use your new iPood Touch, required upgrade) and getting errors such as "A network error occurrred while attempting to read from the file C:\WINDOWS\I
-
How can I get a report to use a DSN instead of a database name?
DSNs are great things. By using a DSN in a database connection string, you don't have to worry about what happens if you have to look at a different database, or if a database name changes. All you have to do is change the database the DSN points t
-
import javax.swing.*; import java.awt.*; public class SystemTime{ public static void main(String[] args) { JFrame win = new JFrame("System Time"); Container contPane = win.getContentPane(); contPane.setBackground(Color.blue); BorderLayout layM = new
-
Detecting key events and setting caret position from a Document model
Hello, I have created a "masked" JTextField that contains specific formatting (these subclasses were created prior to the advent of Sun's implementation of masked fields, and are used extensively throughout my system, so I can't easily implement Sun'
-
No LTE after updating to iOS 8.2
Is anyone else experiencing this?