Iscsiadm -m node -L all results in errors

Hi,
I am following your document under
http://www.oracle.com/technology/pub/articles/wartak-rac-vm.html
When I get to the stage :
iscsiadm -m node -L all
which should log me into the filers all I get are errors.
Everything is fine up until that point.
The errors are as follows:
[root@rac1 ~]# end_request: I/O error, dev sda, sector 0
Buffer I/O error on device sda, logical block 0
end_request: I/O error, dev sda, sector 0
Buffer I/O error on device sda, logical block 0
and also :
[root@iscsi1 ~]# sess_param(173) 1 1 1 8192 8192 262144 65536 2 0 1 1 1 0 1 1
sess_param(173) 1 1 1 8192 8192 262144 65536 2 0 1 1 1 0 1 1
sess_param(173) 1 1 1 8192 8192 262144 65536 2 0 1 1 1 0 1 1
sess_param(173) 1 1 1 8192 8192 262144 65536 2 0 1 1 1 0 1 1
sess_param(173) 1 1 1 8192 8192 262144 65536 2 0 1 1 1 0 1 1
Everything is fine up until I try this command:
iscsiadm -m node -L all
Then I get these error messages.
Has anyone experienced the same trouble or able to offer any ideas as to why this may be happening?
Thanks.

I use:
iscsiadm -m discovery -t st -p <ip address of netapp>
iscsiadm -m node -p <ip of netapp> -T <iscsi iqn of netapp> -l
example:
iscsiadm -m discovery -t st -p 10.140.200.100
iscsiadm -m node -p 10.140.200.100 -T iqn.1992-08.com.netapp:sn.xxxxxxxx -l

Similar Messages

Getting a "Displaying only the newest results below. To view all results, narrow your query by adding a filter" message in error

I have a list with almost 10000 items. I have a view that should be returning 8 items. For me, the Farm Admin, I see the full set of expected values. The message "Displaying only the newest results below. To view all results, narrow your query by
adding a filter" shows for other users. This makes no sense -
there ARE filters on this view. I'd rather not increase the throttle limit.
Anthony Kelly

Hi Ajk,
Check that the list is not scoped by an audience; but, I'm afraid that either way admin, (e.g. non Farm admin or site collection admin)
I'd recommend exporting to excel, create two new spreadsheets and then import as custom lists.
Best of luck and cheers,
Stacy Anothersharepointblog.blogspot.com

Configuration validation resulted in error(s)

Hi,
I am facing a problem in configurator,we are using deferred booking workflow.When we are creating new orders with ATO/PTO items the standard BOOK Node in the workflow is getting completed with result Incomplete.
The error message on sales order, which we can see from View all open messages, is saying as"Configurator validation resulted in error(s)".
When we copy the above sales order which is failing with above error and create a new order, the new order is getting booked successfully.We are not changing anything in the copied order.
Also the deferred workflow is not giving any issues when creating a sales order using the Standard item.The OM debug is also not suggesting anything related to this.
Please let me know if anyone have come across this issue.
Thanks!

Thanks Sandeep for ur reply on this..
I followed the process u mentioned but it didnt work.Actually as I mentioned in my first question, this issue is coming up only when we are creating new sales order.If we copy the sales order which is not getting booked then the new one(copied) sales order's gets booked correctly.Though the copied sales order also have same configuration.
I also tried to validate the Configuration for the sales order having issue using the api CZ_CONFIG_API_PUB.verify_configuration and this resulting as SUCCESS.
Is there any thing in the deferred booking process which may cause this issue?
Also the error message Configuration Validation resulted in errors is coming through a exception, and the exception is being used in CZ_BATCH_VALIDATE.The batch validate is being called from Send_Input_xml procedure.It seems if we copy the order this procedure for batch validate is not being called.
but i m not getting any clue in Send_Input_xml procedure abt why exception is being raised.
Thanks!

Using LOV with Validation on the Numeric Fields results in Error

Dear JHeadstart Team,
During my work with lov I encountered another problem. I defined a lov and attached the lov to a numeric field and check the LOV for validation. Now when I use LOV using the LOV button it works fine but when I enter some numbers and then press tab the LOV was not shown correctly and resulted in the following errors and the worst thing is that you can not navigate to any other pages and all try to navigate to other pages results in errors too. When we put the same LOV on a string field (which is not desirable for us) it worked fine.
It seems to me like a bug. Am I right? Is ther any solution or workaround for this problem?
Thanks in advance,
Navid
16:31:29 DEBUG (LovItemBean) -Cleared value of item HrTrainingCourseSchedulesTitle
16:31:29 DEBUG (LovItemBean) -Cleared value binding #{bindings.HrTrainingCourseSchedulesTitle.inputValue} of item HrTrainingCourseSchedulesTitle
16:31:29 ERROR (ApplyRequestValuesPhase) -java.lang.ClassCastException: java.lang.Long
javax.faces.el.EvaluationException: java.lang.ClassCastException: java.lang.Long
     at com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:130)
     at oracle.adf.view.faces.component.UIXComponentBase.__broadcast(UIXComponentBase.java:1079)
     at oracle.adf.view.faces.component.UIXEditableValue.broadcast(UIXEditableValue.java:247)
     at oracle.adf.view.faces.component.UIXSelectInput.broadcast(UIXSelectInput.java:215)
     at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:249)
     at javax.faces.component.UIViewRoot.processDecodes(UIViewRoot.java:307)
     at com.sun.faces.lifecycle.ApplyRequestValuesPhase.execute(ApplyRequestValuesPhase.java:79)
     at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
     at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:90)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:197)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at com.pooya.controller.jsf.PooyaAuthenticationFilter.doFilter(PooyaAuthenticationFilter.java:256)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:332)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:367)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:336)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:196)
     at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:87)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:627)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:218)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:119)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:230)
     at oracle.oc4j.network.ServerSocketAcceptHandler.access$800(ServerSocketAcceptHandler.java:33)
     at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:831)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.ClassCastException: java.lang.Long
     at oracle.jheadstart.controller.jsf.bean.LovItemBean.validateWithLov(LovItemBean.java:101)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:126)
     ... 31 more

Hi Navid,
We ran into the same bug and have the next workaround for it:
We extended the JHeadstart class 'LovItemBean' and we have overridden the method 'validateWithLov(...)' with:
public void validateWithLov(ValueChangeEvent valueChangeEvent)
    Object newValue = valueChangeEvent.getNewValue();
    if(newValue != null && !(newValue instanceof String))
      newValue = newValue.toString();
      ValueChangeEvent newEvent = new ValueChangeEvent(valueChangeEvent.getComponent(), valueChangeEvent.getOldValue(), newValue);
      newEvent.setPhaseId(valueChangeEvent.getPhaseId());
      super.validateWithLov(newEvent);
    else
      super.validateWithLov(valueChangeEvent);
}Next step is to use a custom template in your JHeaedstart Application Structure file for 'LOV_ITEM_BEAN'. In this custom template you should use your own class as 'managed-bean-class' instead of the default JHeadstart one.
Now you can safely generate LOV with validation of number fields.
Maybe something the JHeadstart can pcik up in the next release of JHeadstart :-)
Hope this helps.
Pascal

WSRP: Relative URL results in error code 404 in the consumer access.log

Hello everyone,
I deployed a JSF portlet(implemented in facelets) in Weblogic Server 10.3.2 (11g) [extended to support WSRP]. When the JSF portlet is consumed from a 'consumer' portal [Weblogic 10.3.2 portal], WSRP URL Rewrite results in error code 404 in the consumer portal access.log if the relative path (contextPath+resourcePath) of the javaScript resource is provided.
However, when the absolute path (protocol + serverName + port+ contextPath) of the JavaScript resource is provided, it works correctly:
works:
<script type="text/javascript" src="#{request.protocol}://#{request.serverName}:#{request.serverPort}#{request.contextPath}/resources/scripts/search/patientSearch.js"></script>
Failed:
<script type="text/javascript" src="#{request.contextPath}/resources/scripts/search/patientSearch.js"></script>
Any idea on what is causing the incorrect URL Rewrite?
The .xhtml and the portlet wsdl are listed below:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml"
xmlns:ui="http://java.sun.com/jsf/facelets"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:a4j="http://richfaces.org/a4j"
xmlns:rich="http://richfaces.org/rich"
xmlns:nchic="http://www.saic.com/nchicago/jsf">
<ui:composition template="/WEB-INF/facelets/templates/page-protected.xhtml">
<head>
<title>not used</title>
<ui:define name="title">#{msgs.searchPageTitle}</ui:define>
<ui:define name="head">
<f:verbatim>
<style type="text/css">
#patientSearchContainer .pageCentered {
width: 800px;
#patientSearchFormInstructions {
padding: 10px 0px 10px 0px;
font-weight: bold;
font-size: 11px;
text-align: left;
.s-form-label {
width: 250px;
.s-form-input {
width: 450px;
</style>
</f:verbatim>
<script type="text/javascript" src="#{request.protocol}://#{request.serverName}:#{request.serverPort}#{request.contextPath}/resources/scripts/search/patientSearch.js"></script>
</ui:define>
</head>
<body >
<ui:define name="body" >
<h:panelGroup id="patientSearchContainer"
layout="block"
style="text-align: center;">
<rich:panel id="patientSearchPanel"
styleClass="pageCentered"
header="#{msgs.searchPanelSearchTitle}">
<h:panelGroup id="patientSearchFormInstructions" layout="block">
<h:outputText value="#{msgs.searchInstructions}" />
<ul>
<li><h:outputText value="#{msgs.searchInstructions1}" /></li>
<li><h:outputText value="#{msgs.searchInstructions2}" /></li>
<li><h:outputText value="#{msgs.searchInstructions3}" /></li>
</ul>
</h:panelGroup>
<h:panelGroup id="errorPanel"
layout="block"
rendered="#{searchForm.hasMessages}">
<h:panelGroup layout="block"
style="padding: 5px;">
<h:outputFormat value="#{msgs.errorMultipleMessage}"
rendered="#{searchForm.errorCount > 1}">
<f:param value="#{searchForm.errorCount}" />
</h:outputFormat>
<h:outputFormat value="#{msgs.errorSingleMessage}"
rendered="#{searchForm.errorCount == 1}">
<f:param value="#{searchForm.errorCount}" />
</h:outputFormat>
<h:messages layout="list"
showSummary="false"
showDetail="true"
errorClass="errors"
styleClass="errorsList" />
</h:panelGroup>
</h:panelGroup>
<h:form id="patientSearchForm" prependId="false">
<h:panelGrid columns="2"
columnClasses="s-form-label,s-form-input"
summary="#{msgs.tableSummary}">
<nchic:label for="queryIdType"
value="#{msgs.labelIdType}"
required="false" />
<h:selectOneMenu id="queryIdType"
value="#{searchForm.criteria.identificationType}"
converter="patient.IdentificationType"
tabindex="2"
styleClass="masked-hidden not-required">
<f:selectItems value="#{searchForm.lists.allIdTypes}" />
<a4j:support event="onchange"
reRender="sponsorSearch,queryIdNumber"
oncomplete="JointReg.searchForm.patientIdTypeUpdateComplete();"
onsubmit="JointReg.searchForm.patientIdTypeUpdateSubmit();"
actionListener="#{searchForm.identificationTypeChangeListener}" />
</h:selectOneMenu>
<nchic:label for="sponsorSearch"
value="#{msgs.labelIdNumberRadios}"
required="false" />
<h:selectOneMenu id="sponsorSearch"
value="#{searchForm.criteria.sponsorSearch}"
tabindex="3"
disabled="#{searchForm.identificationDisabled}"
styleClass="masked-hidden not-required">
<f:selectItem itemValue="true" itemLabel="#{msgs.labelSponsor}" />
<f:selectItem itemValue="false" itemLabel="#{msgs.labelPatient}" />
</h:selectOneMenu>
<nchic:label for="queryIdNumber"
value="#{msgs.labelIdNumber}"
required="false" />
<h:inputText id="queryIdNumber"
converter="patient.IdentificationNumber"
value="#{searchForm.criteria.identificationNumber}"
tabindex="4"
styleClass="not-required resettable"
disabled="#{searchForm.identificationDisabled}"
maxlength="11" />
<nchic:label for="queryBirthDate"
value="#{msgs.labelBirthDateShort}"
required="false" />
<nchic:date id="queryBirthDate"
value="#{searchForm.criteria.birthDate}"
monthValues="#{searchForm.lists.allMonths}"
dayValues="#{searchForm.lists.allDays}"
yearValues="#{searchForm.lists.allYears}"
tabindex="5"
styleClass="masked-hidden not-required resettable" />
<nchic:label for="queryLastName"
value="#{msgs.labelLastName}"
required="false" />
<h:inputText id="queryLastName"
value="#{searchForm.criteria.lastName}"
tabindex="8"
maxlength="30"
styleClass="not-required resettable" />
<nchic:label for="queryFirstName"
value="#{msgs.labelFirstName}"
required="false" />
<h:inputText id="queryFirstName"
value="#{searchForm.criteria.firstName}"
tabindex="9"
maxlength="30"
styleClass="not-required resettable" />
<nchic:label for="queryGender"
value="#{msgs.labelGender}"
required="false" />
<h:selectOneMenu id="queryGender"
value="#{searchForm.criteria.gender}"
converter="patient.Gender"
tabindex="10"
styleClass="masked-hidden not-required resettable">
<f:selectItems value="#{searchForm.lists.allGenderTypes}" />
</h:selectOneMenu>
</h:panelGrid>
<h:panelGroup layout="block" style="text-align: center">
<h:panelGroup layout="block"
style="padding-top: 15px; margin-left: auto; margin-right: auto;">
<h:commandButton action="#{searchForm.searchAction}"
value="#{msgs.buttonSearch}"
styleClass="s-button"
tabindex="11"
onclick="jQuery(document.body).mask('Searching...');" />
<rich:spacer width="10" />
<h:commandButton type="button"
styleClass="s-button"
onclick="return JointReg.searchForm.resetSearchForm();"
tabindex="12"
value="#{msgs.buttonClearSearch}" />
<rich:spacer width="100" />
<h:commandButton action="#{searchForm.createJohnDoeAction}"
styleClass="s-button"
onclick="jQuery(document.body).mask('Registering...');"
tabindex="13"
value="#{msgs.buttonJohnDoe}" />
</h:panelGroup>
</h:panelGroup>
</h:form>
</rich:panel>
</h:panelGroup>
</ui:define>
</body>
</ui:composition>
</html>
WSDL:
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
- <s0:definitions xmlns:s0="http://schemas.xmlsoap.org/wsdl/" xmlns:s1="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns:s2="urn:oasis:names:tc:wsrp:v1:bind" xmlns:s3="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:s4="urn:bea:wsrp:ext:v1:bind" xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" targetNamespace="urn:oasis:names:tc:wsrp:v1:wsdl">
<import location="http://10.75.2.235:7711/RegistrationPortlet/producer/wsrp-2.0/markup?WSDL" namespace="urn:oasis:names:tc:wsrp:v2:wsdl" xmlns="http://schemas.xmlsoap.org/wsdl/" />
<s0:import location="http://10.75.2.235:7711/RegistrationPortlet/producer/wsrp-1.0/markup?WSDL/wlp_wsrp_v1_bindings.wsdl" namespace="urn:bea:wsrp:ext:v1:bind" />
<s0:import location="http://10.75.2.235:7711/RegistrationPortlet/producer/wsrp-1.0/markup?WSDL/wsrp_v1_bindings.wsdl" namespace="urn:oasis:names:tc:wsrp:v1:bind" />
<wsp:UsingPolicy s0:Required="true" />
- <wsp:Policy s1:Id="ProducerDefaultPolicy">
- <wsp:All>
- <wssp:Identity xmlns:wssp="http://www.bea.com/wls90/security/policy">
- <wssp:SupportedTokens>
- <wssp:SecurityToken TokenType="http://docs.oasis-open.org/wss/2004/01/oasis-2004-01-saml-token-profile-1.0#SAMLAssertionID">
- <wssp:Claims>
<wssp:ConfirmationMethod>sender-vouches</wssp:ConfirmationMethod>
</wssp:Claims>
</wssp:SecurityToken>
</wssp:SupportedTokens>
</wssp:Identity>
</wsp:All>
</wsp:Policy>
- <s0:service name="WSRPService">
- <s0:port binding="s2:WSRP_v1_Markup_Binding_SOAP" name="WSRPBaseService">
<s3:address location="http://10.75.2.235:7711/RegistrationPortlet/producer/wsrp-1.0/markup" />
</s0:port>
- <s0:port binding="s2:WSRP_v1_ServiceDescription_Binding_SOAP" name="WSRPServiceDescriptionService">
<s3:address location="http://10.75.2.235:7711/RegistrationPortlet/producer/wsrp-1.0/serviceDescription" />
</s0:port>
- <s0:port binding="s4:WLP_WSRP_v1_Markup_Ext_Binding_SOAP" name="WLP_WSRP_Ext_Service">
<s3:address location="http://10.75.2.235:7711/RegistrationPortlet/producer/wsrp-wlp-ext-1.0/markup" />
</s0:port>
</s0:service>
</s0:definitions>

did you publish the internetserive "<b>bbpstart</b>" to site internal?
Regards
Raja

'Check covered levels OKS' process results in error during QA checkup

Hi,
The following process in QA test, before submiting a service contract results in error.
'Check covered levels OKS' with the error message
"Atleast one covered line is required".
I'm not able to choose any product.
How to set the covered level as product in service contracts?
In the service contracts authoring window, under lines tab -->pricing/products-->
effectivity
line number
level- covered product. But the lov in name field doesn't list any value ?
what could be the possible reason for this?
Regards,
Nithya

Well, I think I can only give some limited info about these questions since I am only a contracts user, not a developer or administrator.
But here's a few things that might help.
1 & 2) I have always created contracts from scratch where I work. They can't seem to get OM to create contracts correctly (so I can't help with question 2). I don't use OM except for inqueries.
When you create such a contract, it should show up in the Install Base (IB) if you look up the IB record with the related Reference Number (which changed to Product Number in the IB when my company switched from 11.5.5 to 11.5.8). In my case it was the Contracts tab in 11.5.5 (Java interface) and the Contracts link in 11.5.8 (HTML interface).
3) From my experience, the Contract Number is the Sales Order Number in View Transactions if you had the AR Interface checked in the contract.
If you want to change from not having the AR Interface checked to having it checked, I think this works fine and the contract will bill the next time the Main Billing program is run after you make the change, as long as the Bill On Date (11.5.5) or Invoice Date (11.5.8) is set to the current date or earlier. An Invoice (INV line item with invoice # -99) will show up in the Billing History after the AR to Contracts Interface program is run. The actual invoice # will show up in this Billing History after the Invoicing programs are run.
In 11.5.5, if our contract started in the future, we not only had to make sure the Bill On Date was current or earlier, but also run the Main Billing program on that contract with a date equal to or later than the end date of the contract we wanted to bill before it would work. Do not do this on all your contracts at once if you have recurring billing on any of them. You must run it on the individual contracts, otherwise the recurring contracts will bill in full. This is supposedly fixed in 11.5.8, since you can use offsets of more than 31 days on the invoice date, but we haven't billed any yet, so I can't say for sure.
I had problems with billing when trying to change the ammounts in the line items after the billing program had already invoiced a contract in 11.5.5 and haven't tried this in 11.5.8 (it billed incorrect ammounts on the successive invoices).
Note that we have a highly customized version of Oracle Applications 11i, so your results may differ somewhat.

Solman_admin password changes results in errors during managed system setup

Hello all,
I am trying to get Solman 4.0 EHP 1 to work, but get numberous problems.
Currently I have 6 messages at SAP, but no solution yet.
Situation:
Solman 4.0
SAP_BASIS     701     0003
SAP_ABA     701     0003
ST-PI     2008_1_700     0000
PI_BASIS     701     0003
SAP_BW     701     0003
CRMUIF     500     0001
SAP_AP     700     0014
BBPCRM     500     0013
CPRXRPM     400     0014
BI_CONT     704     0002
ST     400     0019
ST-A/PI     01L_CRM570     0000
ST-ICO     150_700     0016
ST-SER     701_2008_2     0002
So, it is uptodate.
The problem:
Changing the solman_admin password results in errors during connecting a managed system.
In the inital setup the solman_admin is created with a pasword.
After the basic setup I setup some managed systems.
In the meantime I had to change the password of solman_admin
I am logged in with solman_admin and do solman_setup to setup the managed system.
During the setup a process tries to logon back to the solman using solman_admin and the incorrect password.
This is the logging:
Step SSO Details
Found SID for SSO ACL entry : MSD
Found login.ticket_client for SSO ACL entry : 000
The Read entry permission on TicketKeystore/SAPLogonTicketKeypair-cert was given to sap.com/tcwebadministratorsolmandiag/servlet_jsp/smd/root/WEB-INF/lib/SetupLib.jar
The TicketKeystore/SAPLogonTicketKeypair-cert was succesfully read (823 bytes)
A failure occured while connecting to ABAP stack on localhost sys=70 client=300 user=SOLMAN_ADMIN
!! Exception : Password logon no longer possible - too many failed attempts
A failure occured while importing ABAP SSO ticket certificate in ABAP stack
!! Exception : java.lang.NullPointerException
Java SSO ticket certificate of MSD was imported in ABAP PSE of kswv024.mob.local (client 300)
The Java SSO ticket certificate was successfully imported in ABAP System PSE, and the ACL updated accordingly (SID=MSD LoginTicketClient=000)
Anyone else has this problem?
gr
Sander

Just for clarification it's Solman 7.0 EHP1 correct?
Also you may want to unlock the following user:
localhost sys=70 client=300 user=SOLMAN_ADMIN
Then if you navigate (in solution manager) to TCode solman_workcenter -> "Root Cause Analysis" tab ->"Agent Administration" menu item on the left -> "Applications Configuration" tab -> under the Agent Applications - Configuration menu on the left select "com.sap.smd.agent.application.global.configuration" -> Change the "Scope" drop down in the frame to the right to the SMD agent that you are using for "localhost sys=70 client=300" -> Click the "edit" button to the right of the Scope drop down box -> now find the entry below that lists "SOLMAN_ADMIN" as the user and find the corresponding password entry and update it with the new password that you changed it to -> click save and try the managed setup again.
Hope this helps, please let me know and we can go from there.

Export from OWB Release: 9.2.0.2.8 results in error: MDL1255: Error export

An export of a whole project from the OWB-client results in error en crash of the OWB Client.
Does anyone know what causes this?
Below the contents of the log-file generated by the export-utility
Export started at 11/14/2005 4:53:17 PM
* Export from OWB Release: 9.2.0.2.8 Version: 9.2.0.2.0
* User: owbrep_MDN_dev Connect String: (DESCRIPTION=(ADDRESS=(HOST=l2-bm13-e0g.nl.rsg)(PROTOCOL=tcp)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=owbrep.l2_bm13_e0g.nl.rsg)))
* Definition File: null
* Data File: C:\data\owb\o\MIS_MDN-20051114_1651.mdl
* Log File: C:\data\owb\o\Log.log Log Message Level: ALL
* Physical Names: Y Field Separator: | Character Set: WE8MSWIN1252
* Project: MIS_MDN Configuration Data: Y
MDL1256: Error occurred exporting LOCATION with physical name <DB>, business name <DB>.
Detailed Error Message:
MDL1255: Error exporting CONNECTOR for LOCATION <DB/DB>.
Error in SQL Statement. Please contact Oracle Support with the stack trace and details on how to reproduce it.
*************************************************************

This will not work.. Ypu cannot use FTP to 'PULL' a document into the database. (Yes I know there's a placeholder for an FTPURITYPE() but it was never implemented).
However you can use an FTP client to PUSH content into the XML DB repository. If the content is schema based XML associated with a known (registered) XML schema the content of the file will automatically be stored in the default table associated with the root element of the file. If the content is not associated with an known XML schema you can then use xdburitype to read the resource that was created when the document was uploaded into the repository

WS17900260 - Task TS17900108 resulted in error, in HCM Processes and Forms

Hi,
I have designed a HCM process and workflow. In custom workflow ,WS17900260 (TS17900108) has been used to save data. In this step it is resulting in error and shows the below message in "Step History" tab. No message in Message Tab.
Work item 000000172044: Object CL_HRASR00_WF_COMPONENTS method SAVE_FORM_DATA_TO_DB cannot be exe
Message no. WL821
An exception with the type CX_HRASR00_PROCESS_MODE LLING occurred, but was neither handled locally.
I tried executing the associated method and I did not get any error. Please let me know if anyone has faced this issue and how it is resolved.
Thanks,
Sri

Hi Sri
Expecting a prompt answer in 2 hours time is a tad too demanding for all of us
We try to help you based on our experience and if we do not have it, we just wait for the right one to respond.
It is not that I have experience in HCM Processes and Forms, but a little bit of googling to help you gave me the following:
1) SAP Help for your task TS17900108 states that it has the same requirements for binding as that of task TS17900107 .... check the latter half of the page here:
https://help.sap.com/saphelp_erp60_sp/helpdata/en/42/f28f8a1e5132c3e10000000a1553f6/content.htm
2) If you check TS17900107 binding requirements, it needs certain necessary parameters which may be causing the issue. Check the mandatory requirements here:
https://help.sap.com/saphelp_erp60_sp/helpdata/en/42/f2cf2c249b3268e10000000a1553f6/content.htm
Also check for authorizations
3) See how another user solved the issue with the same method here:
http://scn.sap.com/thread/1753027
4) See the possible advice for a similar issue with task TS17900107 (which is kind of similar to your task)
Novice in HR forms and processes workflow - help in usage of TS17900110
I checked various threads and the common link is that it all depends on your system and the bindings or the custom functions called within. Also do check for authorizations as mentioned in the first link from Help.sap.com
I am sorry, I cannot give you further details because I myself do not have experience in HCM P&F. I am sure you too can google further from here, or we can be a little more patient for others to reply (I understand that some issues are critical and need immediate resolution, but we all are busy in our own projects and sometimes are not able to reply immediately).
Regards,
Modak

PLEASE HELP!!! Item Validation Resulted in error(s).

We get following error when using Oracle process_order API to create an Order.
Where should I check from? All the items seem valid.
There were errors in Oracle API
Item Validation Resulted in error(s).
Cannot get valid name for - Item_Relationship_Type

Pl see if ML Doc 417696.1 will help
Srini

ExecuteQueryForObject returned too many results jdbc error

Hi All,
I am getting the following error on running the tomcat 6.0 and I have Oracle 11g installed.
08 Dec 2010 16:23:41 ERROR [QUARTZ_Worker-5] org.quartz.core.JobRunShell - Job DCTM.DCTMServerPipe threw an unhandled Exception:
org.springframework.jdbc.UncategorizedSQLException: SqlMapClient operation; uncategorized SQLException for SQL []; SQL state [null]; error code [0]; Error: executeQueryForObject returned too many results.; nested exception is java.sql.SQLException: Error: executeQueryForObject returned too many results.
     at org.springframework.jdbc.support.SQLStateSQLExceptionTranslator.translate(SQLStateSQLExceptionTranslator.java:121)
     at org.springframework.jdbc.support.SQLErrorCodeSQLExceptionTranslator.translate(SQLErrorCodeSQLExceptionTranslator.java:322)
     at org.springframework.orm.ibatis.SqlMapClientTemplate.execute(SqlMapClientTemplate.java:212)
     at org.springframework.orm.ibatis.SqlMapClientTemplate.queryForObject(SqlMapClientTemplate.java:271)
     at org.springframework.orm.ibatis.SqlMapClientTemplate.queryForObject(SqlMapClientTemplate.java:265)
     at com.emc.documentum.bpm.daos.impl.AbstractIbatisBaseDaoImpl.queryForObject(AbstractIbatisBaseDaoImpl.java:119)
     at com.emc.documentum.bpm.bamengine.daos.impl.ServerConfigDaoImpl.getDBCurrentTime(ServerConfigDaoImpl.java:28)
     at com.emc.documentum.bpm.bamengine.services.server.factory.impl.ServersFactoryImpl.updatePipeServerTimezoneOffset(ServersFactoryImpl.java:56)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:301)
     at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:198)
     at $Proxy50.updatePipeServerTimezoneOffset(Unknown Source)
     at com.emc.documentum.bpm.bamengine.services.sharedservices.impl.TaskManagerServiceImpl.executePipe(TaskManagerServiceImpl.java:341)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:301)
     at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:198)
     at $Proxy52.executePipe(Unknown Source)
     at com.emc.documentum.bpm.bamengine.scheduler.impl.PipeJobImpl.execute(PipeJobImpl.java:17)
     at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
     at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:525)
Caused by: java.sql.SQLException: Error: executeQueryForObject returned too many results.
     at com.ibatis.sqlmap.engine.mapping.statement.MappedStatement.executeQueryForObject(MappedStatement.java:124)
     at com.ibatis.sqlmap.engine.impl.SqlMapExecutorDelegate.queryForObject(SqlMapExecutorDelegate.java:518)
     at com.ibatis.sqlmap.engine.impl.SqlMapExecutorDelegate.queryForObject(SqlMapExecutorDelegate.java:493)
     at com.ibatis.sqlmap.engine.impl.SqlMapSessionImpl.queryForObject(SqlMapSessionImpl.java:106)
     at org.springframework.orm.ibatis.SqlMapClientTemplate$1.doInSqlMapClient(SqlMapClientTemplate.java:273)
     at org.springframework.orm.ibatis.SqlMapClientTemplate.execute(SqlMapClientTemplate.java:209)
     ... 23 more
How can this be resolved? Please help !!
Thanks, T
Edited by: 805903 on Dec 9, 2010 3:00 AM

Error executeQueryForObject returned too many results
Typical Error msg:
“SqlMapClient operation; uncategorized SQLException for SQL []; SQL state [null]; error code [0]; Error: executeQueryForObject returned too many results.; nested exception is java.sql.SQLException: Error: executeQueryForObject returned too many results”
The error is caused for using queryForObject (for a single result) instead of queryForList (when expecting multiple results).
Example of correct solution
In DAO:
public List<UpdatedContractRateDO> getUpdatedCtrctRate(Map paramMap) throws DataAccessException {
return (List<UpdatedContractRateDO>) getSqlMapClientTemplate().queryForList("charge.getUpdatedCtrctRate", paramMap);
}

Tried all 6steps to Error Message: An error has occurred when attempting to change modules-Please help thx

Tried all 6steps to Error Message: An error has occurred when attempting to change modules-Please help thx

Hi, I¹ve been through it again to ensure I¹ve not forgot things. Completely
removed Lightroom and all files I can find, etc and reloaded. Some tedious
result. Step 6 is too time consuming at the moment for me, too many things
on the go since I¹m about to go on holiday and on return I shall need
Lightroom on this iMac. Any clues? This iMac had Mavericks from new,
uploaded to Yosemite and then loaded Photoshop CC, Lightroom etc and get
this damned problem.
Reading around the web I¹m not the only one with this issue, to suggest a
new user a/c is a soft option without resolving the issue.
I hope an expert from Adobe can resolve this,
Regards, George (retired IT Manager and IT Systems Project Manager)

SMS... iPhone spontaneously adding 1 to phone numbers, resulting in error

I have all of my contact phone numbers stored as 10 digit numbers.
Recently, when texting to some of these contacts, the iPhone has started adding the extra digit "1" before the phone numbers, resulting in error messages, and undelivered text messages.
What gives? Has anyone else had this problem?

you can do this with apple script.
Paste the following into Script Editor and run it.
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px;
color: #000000;
background-color: #ADD8E6;
overflow: auto;"
title="this text can be pasted into the Script Editor">
tell application "Address Book"
set NP to number of people
repeat with i from 1 to NP
set pers to person i
repeat with cphone in phones of pers
if value of cphone is not equal to "" then
set cur_phone to value of cphone
set value of cphone to "1" & cur_phone
end if
end repeat
end repeat
end tell</pre>

Does multiple instances of DAQmx start task result in error?

I am trying to read voltages from pressure transducers and LVDTs in two separate While Loops. But when running the program there is an error regarding DAQmx Start Task.vi. So I was wondering if multiple instances of DAQmx Start task results in error. I have attached the vi.
Thanks
Attachments:
IsoConsolidationDAQMAX02.vi ‏140 KB

Thank you for the reply. New to Labview so I didn't know that we had to search using the error code, I tried searching using text though. Will do that from the next time, thanks.
I do not have the problem with the write tasks but only with the read tasks. Right now I have one start task for all the input from the pressure transducers and LVDTs and three start tasks for the three analogue outputs and the program seems to run fine.

When I book the PTO or ATO model, I am getting the error "Configuration validation resulted in error(s)."

Deal All,
When I try to BOOK the PTO or ATO model, I am getting this error "Configuration validation resulted in error(s).". System is not allowing me to BOOK the order.
Really appreciate if anyone faced this type of issue and please provide some solution on this.
Regards
Subramanyam Jayaram
Mobile : +91-888 680 1966

Please review the following docs and see if any helps.
Configuration Validation Resulted In Error(s) While Booking after Upgrade to R12 (Doc ID 1679380.1)
Configuration validation resulted in error(s); ORA-01403: no data found in Package oe_config_pvt (Doc ID 384266.1)
11.5.10.25.37 or lower - When Booking, Configuration Validation Resulted In Error(s) (Doc ID 727949.1)
"CONFIGURATION VALIDATION RESULTED IN ERROR(S)" WHEN BOOKING THE ORDER (Doc ID 1065818.1)
Configuration Validation Resulted In Error(s) While Booking (Doc ID 358164.1)
OEXOEORD: Booking Errors. Configuration Validation Resulted In Error(S). (Doc ID 311606.1)
Thanks,
Hussein

Iscsiadm -m node -L all results in errors

Similar Messages

Maybe you are looking for