ISDN BRI backup - Disconnect after 1 sec

There is a ISDN BRI backup to Serial IF on a router.BRI seems to be able to cennect with opossite site, but after 1 sec comes Disconnect(see attachment).I tried Floating static routes and Dialer watch as well, with the same result. Can anybode help me? Thanks

There is no aaa new-model statment on both side.I`ve rewrite user/psw and added ppp chap hostname ... command.
output of isdn status follows:
cpp-poprad#
Sep 20 14:52:00.647: %DIALER-6-BIND: Interface BR0/1/0:1 bound to profile Di0
Sep 20 14:52:00.651: %LINK-3-UPDOWN: Interface BRI0/1/0:1, changed state to up
Sep 20 14:52:00.651: %ISDN-6-CONNECT: Interface BRI0/1/0:1 is now connected to 0524684841 N/A
Sep 20 14:52:01.655: %ISDN-6-CONNECT: Interface BRI0/1/0:1 is now connected to 0524684841 cpp-poprad
Sep 20 14:52:01.655: %ISDN-6-DISCONNECT: Interface BRI0/1/0:1 disconnected from 0524684841 cpp-poprad, call lasted 1 seconds
Sep 20 14:52:01.659: %LINK-3-UPDOWN: Interface BRI0/1/0:1, changed state to down
Sep 20 14:52:01.659: %DIALER-6-UNBIND: Interface BR0/1/0:1 unbound from profile Di0sh isdn statu
Global ISDN Switchtype = basic-net3
ISDN BRI0/1/0 interface
dsl 2, interface ISDN Switchtype = basic-net3
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 71, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 2 CCBs = 0
The Free Channel Mask: 0x80000003
Total Allocated ISDN CCBs = 0
cpp-poprad#sh isdn act
ISDN ACTIVE CALLS
Call Calling Called Remote Seconds Seconds Seconds Charges
Type Number Number Name Used Left Idle Units/Currency
cpp-poprad#
Sep 20 14:52:18.295: %LINK-3-UPDOWN: Interface BRI0/1/0:1, changed state to up
Sep 20 14:52:18.295: %DIALER-6-BIND: Interface BR0/1/0:1 bound to profile Di0
Sep 20 14:52:18.299: %ISDN-6-CONNECT: Interface BRI0/1/0:1 is now connected to 05246848411 N/A
Sep 20 14:52:18.351: %ISDN-6-CONNECT: Interface BRI0/1/0:1 is now connected to 05246848411 cpp-poprad
Sep 20 14:52:18.531: %LINK-3-UPDOWN: Interface BRI0/1/0:1, changed state to down
Sep 20 14:52:18.531: %DIALER-6-UNBIND: Interface BR0/1/0:1 unbound from profile Di0sh isdn act

Similar Messages

CME Jabber on iPhone disconnects after 10 Secs

Hi all, have a problem on my jabber clients that they disconnect after 10 seconds when making outbound calls. Router 2921 - c2900-universalk9-mz.SPA.151-4.M4.bin runing CME 8.6. iPhones running Jabber 8.6.5.18781. All other devices (CIPC, 7945's etc. (SCCP)) are working fine and are able to make outgoing and incoming calls.
please assist.
this is what I get from the CME
un 8 15:10:43.459: //-1/xxxxxxxxxxxx/SIP/Event/sipSPIEventInfo: Queued event from SIP SPI : SIPSPI_EV_CC_CALL_DISCONNECT
Jun 8 15:10:43.459: //-1/xxxxxxxxxxxx/SIP/Event/sipSPIEventInfo: Queued event from SIP SPI : SIPSPI_EV_CC_CALL_DISCONNECT
Jun 8 15:10:43.459: //1158/E2B9A9F18216/SIP/Event/Session-Timer/sipSTSLMain: Event: E_STSL_SPI_EVENT
Jun 8 15:10:43.459: //1159/E2B9A9F18216/SIP/Msg/ccsipDisplayMsg:
Sent:
BYE sip:[email protected]:5060;user=phone;transport=udp SIP/2.0
Via: SIP/2.0/UDP 192.168.244.250:5060;branch=z9hG4bK4291EAA
From: "Dave-iPhone" <sip:[email protected]>;tag=BDEC6C-1325
To: <sip:[email protected]>;tag=gf97ll6v-CC-24
Date: Fri, 08 Jun 2012 15:10:25 GMT
Call-ID: [email protected]
User-Agent: Cisco-SIPGateway/IOS-12.x
Max-Forwards: 70
Timestamp: 1339168243
CSeq: 103 BYE
Reason: Q.850;cause=102
P-RTP-Stat: PS=539,OS=16170,PR=894,OR=17880,PL=0,JI=0,LA=0,DU=10
Content-Length: 0
Jun 8 15:10:43.495: //1159/E2B9A9F18216/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 200 OK
Via: SIP/2.0/UDP 192.168.244.250:5060;branch=z9hG4bK4291EAA
From: "Dave-iPhone" <sip:[email protected]>;tag=BDEC6C-1325
To: <sip:[email protected]>;tag=gf97ll6v-CC-24
Call-ID: [email protected]
Timestamp: 1339168243
CSeq: 103 BYE
Content-Length: 0
Jun 8 15:10:43.495: //1159/E2B9A9F18216/SIP/Call/sipSPICallInfo:
The Call Setup Information is:
Call Control Block (CCB) : 0x313A9000
State of The Call        : STATE_DEAD
TCP Sockets Used         : NO
Calling Number           : 7477
Called Number            : 0114674466
Source IP Address (Sig ): 192.168.244.250
Destn SIP Req Addr:Port : 192.168.244.10:5060
Destn SIP Resp Addr:Port : 192.168.244.10:5060
Destination Name         : 192.168.244.10
Jun 8 15:10:43.495: //1159/E2B9A9F18216/SIP/Call/sipSPIMediaCallInfo:
Number of Media Streams: 1
Media Stream             : 1
Negotiated Codec         : g729r8
Negotiated Codec Bytes   : 20
Nego. Codec payload      : 18 (tx), 18 (rx)
Negotiated Dtmf-relay    : 6
Dtmf-relay Payload       : 101 (tx), 101 (rx)
Source IP Address (Media): 192.168.244.250
Source IP Port    (Media): 17620
Destn IP Address (Media): 192.168.244.10
Destn IP Port    (Media): 20040
Orig Destn IP Address:Port (Media): [ - ]:0
Jun 8 15:10:43.495: //1159/E2B9A9F18216/SIP/Call/sipSPICallInfo:
Disconnect Cause (CC)    : 102
Disconnect Cause (SIP)   : 200
Jun 8 15:10:43.587: //1158/E2B9A9F18216/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 200 OK
Via: SIP/2.0/TCP 192.168.1.1:5060;branch=z9hG4bK428F1C;received=192.168.10.1
From: <sip:[email protected]>;tag=BDF344-F6
To: "Dave-iPhone" <sip:[email protected]>;tag=000000000000007f731c4248-4443c002
Call-ID: [email protected]
Date: Fri, 08 Jun 2012 15:18:20 GMT
CSeq: 101 BYE
Server: Cisco-SIPIPCommunicator/9.2.1
Content-Length: 0
Jun 8 15:11:01.471: //-1/xxxxxxxxxxxx/SIP/Event/sipSPIEventInfo: Queued event from SIP SPI : SIPSPI_EV_OUTBOUND_REGISTER
Jun 8 15:11:01.471: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
REGISTER sip:192.168.244.10:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.244.250:5060;branch=z9hG4bK42A3FA
From: <sip:[email protected]>;tag=BE7960-2177
To: <sip:[email protected]>
Date: Fri, 08 Jun 2012 15:11:01 GMT
Call-ID: 38930D6E-B0AF11E1-81BCB8F2-331935B0
User-Agent: Cisco-SIPGateway/IOS-12.x
Max-Forwards: 70
Timestamp: 1339168261
CSeq: 11 REGISTER
Contact: <sip:[email protected]:5060>
Expires: 3600
Supported: path
Content-Length: 0
Jun 8 15:11:01.487: //1160/000000000000/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 400 Bad Request
Via: SIP/2.0/UDP 192.168.244.250:5060;branch=z9hG4bK42A3FA
From: <sip:[email protected]>;tag=BE7960-2177
To: <sip:[email protected]>;tag=v7vgdted
Call-ID: 38930D6E-B0AF11E1-81BCB8F2-331935B0
Timestamp: 1339168261
CSeq: 11 REGISTER
Warning: 399 - "SoftX3000 R601-MSG Error ID:[259] LiteFME Tg register ,get Wll param error "
Content-Length: 0
Thanks
David

Just in case you haven't solved this yet, the issue is detailed below.
Workaround
Bind all SIP traffic to a single interface, ideally the voice vlan interface.
   voice service voip
       sip
         bind all source-interface gigabitEthernet 0/0
Cisco Mobile 8.1 integrated w/CME 8.6. On outgoing calls from Cisco mobile the call will connect, get 2 way audio and then disconnect after
15-20 seconds.
The problem is that when the call connects the CME sends a 200 OK to the Cisco Mobile app. The Cisco Mobile app fails to send an ACK to CME, so CME keeps sending 200 OK messages until it times out and ends the call.
The problem is related to CME using a different source IP address for SIP traffic than what was used for the endpoint to register. The IP used as the source address under Voice Register Global is what the TCP connection is set up to for an outgoing call. However the CME uses the best address to source traffic from when it is not bound. As these devices are on the WiFi network (not the wired voice network), the CME uses a different address to source the SIP traffic for these calls than what is defined under the voice register pool. This causes an error in the Cisco Mobile App, which is why it fails to return the ACK.
We bound SIP traffic globally under Voice Service Voip to the same IP that was defined under the voice register global. After this the calls worked fine.
Reference this Junked bug as well:
CSCtu05278   CME Call from Cisco Mobile to IP phone disconnects after
20 seconds

USB Modem 21M-02 disconnects after 20 sec

Hi,
I have the problem with my newly bought Nokia USB Modem 21M-02. When I try to use it with Play operator (260-06) in Poland (I try 3 different SIM cards) modem disconnects after about 20 second after plugging it into USB. During this short period I can connect with it to Internet, send/receive SMS, browse phone book. Then after about 20 seconds it disconnects, the signaling diode becomes red fast flashing, communication with modem is not possible. I checked this modem with different computers with Windows XP, Windows Vista and MacOS and problem doesn't disappear. What is interesting the problem disappear if I change SIM card to any provided by other operator. So there is no problem with Aero2, Plus, T-mobile.
Any advice? Please help.
Is there any possibility to update firmware? Currently there is M1.7.0.
Przemo

I have the same problem, but I'm using Cisco UCME 9.1
Jabber for iPhone version is 9.1.2.21344
Disconnects exactly after 8 seconds.
Please help somebody!

Wireless disconnect after login with Remote desktop with wpa2

We have 5508 wireless controller with 1142 aironet acess points.... we configured Radius authentication on ACS 5.3 for wireless users
when we take remote desktop connection of wireless client ... it disconnects after 10 sec.
and when we logged in to client ... connectivity was lossed .. I have to reconnect Manually to client..
It's really frustrating for all our service engineers to work remotly ....... Please Help

Hi Santosh,
which vesrion of sw u r running on WLC ?
Open Caveats on 7.4.100.0, CSCuc78713 could be related to this;
CSCuc78713
Symptom: Wireless client cannot receive broadcast packets after broadcast key rotation.
Conditions: Dynamic WEP; 7.0.235.0, 7.2.110.0, and 7.3.101.0 controller software releases.
Workaround:
• Executes the config advanced eap bcast-key-interval 86400 in the middle of the night
• Change security setting to WPA2, and so on.
Regards

IPod Nano (4th Generation) switches on when connected to USB power - shows Menu & hangs (unresponsive to click wheel) - deems off after 5-sec - Switches off after disconnecting from USB Power - syncs with iTunes - Tried 5R's - Problem still persists

1. The iPod Nano (4th Generation - 8GB) switches on, only when connected to USB power by showing apple logo and displays Menu options thereafter..
2. However, I can not access Menu as it is unresponsive to click wheel. As a result it is inaccessible to any further use,
3. NOTE: it displays "Battery Fully charged" icon on the screen without any "Lock" icon.
4. After 5-sec to 10-secs the screen deems off.. i.e. goes to sleep mode.. And thereafter would probably remain like that (sleeeping) for eternity!!!!
5. It Switches off after WITHOUT DISPLAYING any Apple Logo immediately after disconnecting from USB Power.
6. In other words, it can be switched on only through USB power in spite of battery being fully charged.
7. Interestingly, it syncs with iTunes. It is recognised in iTunes (Latest version 11+).. Displays on screen all commands Like.. syncronising, connecting, connected,
8. Allows to add Music, videos like a normal ipod & displays all status information in iTunes.
9. Read Trobleshooting & Tried all 5R's. Registered, Resetted, updated & Restored to iOS 1.0.2
10. It is now displaying to select Language in place of Menu options, with no access through click wheel, centre button whatsoever... Problem still persists
KINDLY GUIDE ME THE SOLUTION. APPRECIATE YOUR RESPONSE in advance...

"I get the feeling that this is a software issue that could probably be solved quite easily"
Since you have already tried all the normal troubleshooting solutions, take the iPod to your nearest Apple Store for a *proper diagnosis.* The staff there will be able to confirm if your problem is software or hardware _*at no cost to you.*_
!http://i50.tinypic.com/izvwo1.gif!

Free jabber disconnect after call for 10-20 sec

I try to use Free Jabber call to my system via DNS SRV record. It can connect to system but It will disconnect after call for 10-20 sec.
All case which call via DNS SRV record, I checked and found
-The problem happen only call to TPS (via conductor).
-If call to endpoint, It's working fine.
-If call to MCU (registered with VCS), It's working fine.
I see log files which new INVITE is sent by TPS to VSC-Exp, VCS-Exp tries to send it out and then TCP connection fails.
2015-02-09T12:45:04+07:00 DC-VCSE tvcs: UTCTime="2015-02-09 05:45:04,239" Module="network.tcp" Level="ERROR": Src-ip="172.18.7.8" Src-port="25297" Dst-ip="199.19.190.28" Dst-port="5060" Detail="TCP Connection Failed"
2015-02-09T12:45:04+07:00 DC-VCSE tvcs: UTCTime="2015-02-09 05:45:04,240" Module="network.sip" Level="DEBUG": Action="Sent" Local-ip="172.18.8.8" Local-port="7001" Dst-ip="172.18.8.20" Dst-port="25008" Msg-Hash="5130918937689017019"
SIPMSG:
|SIP/2.0 408 Request Timeout

I try to use Free Jabber call to my system via DNS SRV record. It can connect to system but It will disconnect after call for 10-20 sec.
All case which call via DNS SRV record, I checked and found
-The problem happen only call to TPS (via conductor).
-If call to endpoint, It's working fine.
-If call to MCU (registered with VCS), It's working fine.
I see log files which new INVITE is sent by TPS to VSC-Exp, VCS-Exp tries to send it out and then TCP connection fails.
2015-02-09T12:45:04+07:00 DC-VCSE tvcs: UTCTime="2015-02-09 05:45:04,239" Module="network.tcp" Level="ERROR": Src-ip="172.18.7.8" Src-port="25297" Dst-ip="199.19.190.28" Dst-port="5060" Detail="TCP Connection Failed"
2015-02-09T12:45:04+07:00 DC-VCSE tvcs: UTCTime="2015-02-09 05:45:04,240" Module="network.sip" Level="DEBUG": Action="Sent" Local-ip="172.18.8.8" Local-port="7001" Dst-ip="172.18.8.20" Dst-port="25008" Msg-Hash="5130918937689017019"
SIPMSG:
|SIP/2.0 408 Request Timeout

ISDN BRI for Backup and remote Support

Hello,
is it possible to configure an ISDN BRI
to use them for Backup and if no Backup is up (primary connection works)i can use
the ISDN BRI for Dialin (Remote Administration)?
My Backup Solution works fine but i do not know, how i have to configure the ISDN BRI so, that acceppt my ISDN Call for Remote Administration.
Thanks in advance
Lorenz

Hi
You can configure 2 dialer interfaces one for dial in and another one for the dial out purpose.
make the 2nd dialer interface as a backup interface for your primary interface and define the floating routes accordingly..
would suggest to go thru the following link which has the whole lot of possible config scenarios discussed and it may help u out in getting the things place ..
http://www.cisco.com/en/US/tech/tk801/tk133/tech_configuration_examples_list.html
regds

ISDN BRI INTERFACE

Isdn bri interface is used as backup by serial interface
backup delay 10 60
under bri interface following command is also configured
dialer idle-timeout 900
what will be idle timeout of bri interface if serial interface comes back and functional.

Hello Jabbar,
this looks like a cisco BCRAN question, here it goes:
the backup delay 10 60 , means that it will take 10 seconds before the secondary link comes up, after the primary goes down, and it will take 60 seconds after the primary goes back up, before the secondary goes down.
dialer idle-timeout 900:
this command indicates how long the call can stay idle before it is disconnected.
from cisco:
"This command is used on lines for which there is no contention. When contention occurs, the dialer fast-idle command is activated. For example, when a busy line is requested to send another packet to a different destination than it is currently connected to, line contention occurs and the dialer fast-idle command is activated.
By default, this command applies to inbound and outbound calls. For example, if a receiving system needs to make outgoing calls, you might configure it with a short idle timeout.
Only packets that match the dialer group reset the idle timer."
So, I guess it would be 900s
HTH,
please rate this post if it does,
Vlad

ISDN BRI layer 1 & layer 2 do not sustain "active" statuses

Hi Expert,
I have some routers which can not sustain the ISDN layer 1 & layer 2 statuses correctly. Whenever, the ISDN line is manually activated or the ISDN BRI ports are manually reset, the layer 1 & layer 2 statuses become active but they become deactivated after a while. I have changed the ISDN module and the same symptom is observed. Would you advise what is the cause and resolution. Your advice in this matter is greatly appreciated.
Thanks and Regards,
Jason Peh

Hi Rick,
Below is the show interface for BRI1/0,
router_2#sh isdn status
Global ISDN Switchtype = basic-net3
ISDN BRI1/0 interface
dsl 8, interface ISDN Switchtype = basic-net3
Layer 1 Status:
DEACTIVATED
Layer 2 Status:
TEI = 66, Ces = 1, SAPI = 0, State = TEI_ASSIGNED
Layer 3 Status:
0 Active Layer 3 Call(s)
Activated dsl 8 CCBs = 0
The Free Channel Mask: 0x80000003
router_2#sh int BRI1/0
BRI1/0 is up (spoofing), line protocol is up (spoofing)
Hardware is BRI
MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation PPP, loopback not set
Last input 00:04:39, output 00:04:39, output hang never
Last clearing of "show interface" counters 24w4d
Input queue: 0/75/0 (size/max/drops); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/drops)
Conversations 0/1/16 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
27807 packets input, 207167 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
27921 packets output, 209138 bytes, 0 underruns
0 output errors, 0 collisions, 551 interface resets
0 output buffer failures, 0 output buffers swapped out
1680 carrier transitions
router_2#sh int BRI1/0:1
BRI1/0:1 is down, line protocol is down
Hardware is BRI
MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation PPP, loopback not set
Keepalive set (10 sec)
LCP Closed, multilink Closed
Last input 04:59:17, output 04:59:17, output hang never
Last clearing of "show interface" counters never
Queueing strategy: fifo
Output queue 0/40, 108 drops; input queue 0/75, 1 drops
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
7434 packets input, 1689890 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
2 input errors, 0 CRC, 1 frame, 1 overrun, 0 ignored, 1 abort
10743 packets output, 782350 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
4682 carrier transitions
router_2#sh int BRI1/0:2
BRI1/0:2 is down, line protocol is down
Hardware is BRI
MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation PPP, loopback not set
Keepalive set (10 sec)
LCP Closed, multilink Closed
Last input 04:59:22, output 04:59:22, output hang never
Last clearing of "show interface" counters never
Queueing strategy: fifo
Output queue 0/40, 3 drops; input queue 0/75, 3 drops
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
6902 packets input, 1530090 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
3 input errors, 0 CRC, 3 frame, 0 overrun, 0 ignored, 3 abort
7527 packets output, 594592 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
25 carrier transitions
I have another router with the same configuration and the statuses are able to sustain correctly. Thus, I doubt that the backup interface command has any effect on the layer 1 & layer 2 statuses.
Best Regards,
Jason Peh

Connecting to an ISDN BRI on a router from a PSTN line from remote site..!!

Friends,
I have a 1812 at HO with WIC1 BS/T Card, connected it to an ISDN BRI line.One of my critical remote location uses Leased circuit to reach my HO Router.But in case if LL goes down,some of the important PC's at the remote site should be able to dial to HO Router BRI Number using PSTN line, get connected and continue, ip address assigned from HO Router and access the application... Is any way available...

Hi Arnab.
You need to configure dial backup through AUX port. You need to connect a normal PSTN line to a modem which in turn is connected to your AUX port. You will have to configure a chat script which you can find in the attachmnet. The attachment is a working example in one of my routers.
You also have to create an ASYNC interface. Check that in the attached file also
--Pls rate if useful---

After diconnecting my pkone from pc my applications don't run, I try to open but after 1 sec back to main screen, it always happen when disconnec from pc, I need back to the factory setings!!! anybody can help?! Thanks

To load new music I need connect my phone to pc, after all when I disconnect phone my applications don't want run,non of them, after one sec back to main screen! Then I need back my phone to factory settings! Anybody know what is wrong?! Thanks

papiciulo wrote:
To load new music I need connect my phone to pc, after all when I disconnect phone my applications don't want run,non of them, after one sec back to main screen! Then I need back my phone to factory settings! Anybody know what is wrong?! Thanks
Go to the iTunes store on the phone and "buy" any free app. This should fix the problem.

All USB drives disconnect after upgrade and clean install of MAC OS X Mavericks

I first upgraded to Mavericks and noticed that my external USB dries would disconnect after MBP Retina Mid 2012 model was updated to Mavericks. These worked fine in all versions of Mac OS X before upgrade. So I did a clean install figured my machine would benifit from this anyway. This did NOT fix the problem.
Wouldn't be much of an issue but I use this macine as a media server with Plex and all the media is in one of the external USB 3.0 drives. All drives are from Seagate, and have found no info there. Guessing this is a bug that Apple needs to fix unless its a Seagate issue which I doubt.
My TEMP FIX while my machine is plugged in to the power adapter and drives.
SETTINGS - ENERGY SAVER - Power Adapter - Computer Sleep set to NEVER

If the tracks are recognized by your iPod (playable), search VersionTracker for "iPod". You'll find a number of utilities that can transfer your tracks and your playlists from your iPod back to your Mac.
If they're just on your iPod as data, then I'm not certain since I don't use a custom hierarchy, but you should be able to copy the folder back to your iTunes Music folder, turn off the "copy to iTunes library when adding to library" preference, and then use the Add To LIbrary command to get them recognized by iTunes. Again, though, I don't use a custom hierarchy, so you might want to ask that question as a new post, just to get additional opinions.
BTW, an iPod is not a reliable backup for your tracks. Too many situations can arise that would cause your iPod to need to be erased. I strongly recommend that you make backups, particularly of any tracks purchased from the iTunes Music Store or that would otherwise be difficult to replace, to CD, DVD, external hard drive, or other medium.

Call is getting disconnect after 3 min when the caller is in queue

Hi,
I am using icm 7.0 with ip ivr 7.0. when all the agents are busy and caller is in queue,call is automatically getting disconnected after 3 min with the message " We are experiancing system problem and unable to process the call. please try again later" .
Icm and ivr script are attached
Regards,
Dinesh Joshi

Hi Chrish,
you are right. the timer was for 180 sec only. now things are working fine after increasing the timer.
Thanks a lot for your reply.
Regards,
Dinesh Joshi

IPod disconnects after sync

My iPod keeps disconnecting after it syncs. I connect it to my iMac; it syncs; and then the icon on the desk top disappears. It is, however, still in the iTunes menu under devices. The reason this is a problem, is when I connect my iPod to use it with Backup (I use my iPod as a external hard-drive for personnel settings back-ups and such) it first syncs with iTunes and then disappears where as before it would be found by backup and start. I did just recently restore my iPod as a test to another problem I am having. My iPod won't charge on my HiFi. It charges on my computer and on my wall charger but it won't charge on the HiFi. I tested it on other HiFi's and it does the same thing, so it is not the HiFi. Besides, my wifes Nano works fine on the HiFi. Any help you can offer?

That's how it's supposed to work.
When auto sync is finished it dismounts.
If you wan to stay connected, select the iPod in iTunes, then tick Enable Disk use.
You will have to Eject the iPod when you are thru.

Problem connecting isdn bri voice interface to pstn

i'm trying to configure my ISDN BRI NT/TE voice interface card (VIC-2BRI-NT/TE) on router 3825 to link to my PSTN provider. This must allow my Cisco IP phones to pass call to the PSTN through my call manager 4.1.
I suscribe to two isdn line. The provider told me that the SWITCH TYPE is VN6 (COTE d'IVOIRE or Ivory Coast).
For my bri configuration, see file "interfaces configuration..."
My problem is that when i pass call from my Ip telephony network, the first call goes well. But after this first call, when i type the command isdn status, i can see that the layer 1 of my isdn interfaces are DEACTIVATED, and after a few minutes, it turn back to ACTIVE. During these minuite, i can't pass any call through my isdn interface.
for outputs of show isdn status command, and isdn debug q931 commands
see file "show isdn status and debug..."
Notice: when the status of the isdn layer is in the deactvated status, i can receive call from the pstn, but i can't passe call to pstn (the state changes to ACTIVE when incomming call from pstn arrive, but still stay DEACTIVATED when outgoing call is initiated)
Please help me

I've entered the "isdn transition-delay 1" interface command and things seem to work well.According to the IOS help on my router,this command clears the ISDN D-CHANNEL after a delay of 1 second.
But i would like to get more information on this command, and also on the isdn layer 2 and 3 timers, and even possible on all the "isdn" interface command option.
THANKS

ISDN BRI backup - Disconnect after 1 sec

Similar Messages

Maybe you are looking for