Isdn callback not working

Hi,
I'm trying to configure my router C1841 to allow the callback to isdn remote user.
The callback perfectly work with my analog remote users.
The router did not initiate callback to the remote isdn caller.

Here is the configuration of my ISDN dialer interface :
interface Dialer10
ip unnumbered FastEthernet0/0
ip access-group sdm_dialer10_in in
no ip redirects
no ip unreachables
no ip proxy-arp
encapsulation ppp
ip route-cache flow
dialer pool 1
dialer remote-name xxxxxx
dialer idle-timeout 600
dialer enable-timeout 2
dialer string 027429815
dialer caller 027429815 callback
dialer-group 10
peer default ip address dhcp-pool xxx-Users
compress stac software
no cdp enable
ppp callback accept
ppp authentication ms-chap ms-chap-v2 callin
end
Could you please let me know what I'm missing ?
The debug show the following :
Dec 11 09:26:16.610: ISDN BR0/0/0 Q921: User RX <- UI sapi=0 tei=127
Dec 11 09:26:16.610: ISDN BR0/0/0 Q931: SETUP pd = 8 callref = 0x11
Sending Complete
Bearer Capability i = 0x8890
Standard = CCITT
Transfer Capability = Unrestricted Digital
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x89
Calling Party Number i = 0x2183, '27429815'
Plan:ISDN, Type:National
Called Party Number i = 0xA1, '27338878'
Plan:ISDN, Type:National
Dec 11 09:26:16.614: ISDN BR0/0/0 **ERROR**: host_incoming_call: DIALER ERROR 0x1: b channel 0, call id 0x48
Dec 11 09:26:16.618: ISDN BR0/0/0 Q921: L2_EstablishDataLink: sending SABME
Dec 11 09:26:16.618: ISDN BR0/0/0 Q921: User TX -> SABMEp sapi=0 tei=125
Dec 11 09:26:16.634: ISDN BR0/0/0 Q921: User RX <- UAf sapi=0 tei=125
Dec 11 09:26:16.634: %ISDN-6-LAYER2UP: Layer 2 for Interface BR0/0/0, TEI 125 changed to up
Dec 11 09:26:16.634: ISDN BR0/0/0 Q921: User TX -> INFO sapi=0 tei=125, ns=0 nr=0
Dec 11 09:26:16.634: ISDN BR0/0/0 Q931: RELEASE_COMP pd = 8 callref = 0x91
Cause i = 0x8095 - Call rejected
Dec 11 09:26:16.654: ISDN BR0/0/0 Q921: User RX <- RR sapi=0 tei=125 nr=1
Dec 11 09:26:26.653: ISDN BR0/0/0 Q921: User TX -> RRp sapi=0 tei=125 nr=0
Dec 11 09:26:26.665: ISDN BR0/0/0 Q921: User RX <- RRf sapi=0 tei=125 nr=1
Dec 11 09:26:31.769: ISDN BR0/0/0 Q921: User RX <- DISCp sapi=0 tei=125
Dec 11 09:26:31.769: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR0/0/0, TEI 125 changed to down
Thanks a lot for help

Similar Messages

  • BaCopyFileProgress with callback not working with D11.5?

    I did a project last year using D10 & Buddy API 3.76 with baCopyFileProgress (callback handler enabled) and everything worked. I’ve done other projects since using D11.5, Buddy API 3.76 and baCopyFile (no callback) and everything worked. Now I’m updating last year’s project with the callback and it locks up (the callback is never called) both with D11.5 + Buddy API 3.76 and D11.5 + Buddy API 4.05 (demo). It locks up even if I just recompile last year's project with D11.5. I’m in the process of ordering the upgrade to Buddy API but the demo xtra isn’t working, I have my doubts registering is gonna fix it. Anyone else having trouble (or not) with D11.5 + Buddy API + baCopyFileProgress?

    the help files still won’t open on XP and I’d bet the system copy animation and progress callbacks are related.
    The help files don't open because I think the Director development team changed some mechanism internally and neglected to tell anyone. I don't think this is related at all to the callback function not being called or the copying not working when it's enabled.
    FWIW: in order to open the Help file, I place the xtra and its help file in the same directory (\Adobe Director 11\Configuration\Xtras\Scripting\Buddy API\) and add a Director file to the same folder with the following code in it:
    on prepareMovie
      tPath = _player.activeWindow.filename
      tDelim = the itemDelimiter
      the itemDelimiter = the last char of the moviePath
      delete the last item of tPath
      tPath = tPath & the itemDelimiter
      the itemDelimiter = tDelim
      OK = baOpenFile(tPath & "Buddy API Help.chm", "maximised")
      --  put "exists:", baFileExists(tPath & "Buddy API Help.chm"), RETURN, tPath & "Buddy API Help.chm"
      _player.activeWindow.forget()
    end
    This file has a single sprite channel, is 1x1 pixels with no titlebar visible. I save it as "Buddy API Help" and I now have an entry under Xtras -> Buddy API -> Buddy API Help

  • YAHOO.util.Connect.asyncRequest('GET', sUrl, callback) not working in Firfo

    The below questions is not releated to portal but i am using in portal
    YAHOO.util.Connect.asyncRequest('GET', sUrl, callback) - working fine in IE7 not working in Mozilla Firfox any solution for this
    Thanks,
    Venkata Sarvabatla

    hi
    you need to see the cause of failure. Either inspect the object o in the watch or in the firebug console you can replay the request and check the response tab (if the request was made). If you dont see any request in console , then it might be some cross domain issue (not sure how this would work in ie though).
    use watches on all the parameters and check that they are correct
    regards
    deepak

  • Callback not working

    I got a planetsim, one of those providers with estonian/uk numbers for travelers.
    I'm trying to make a phone call, i receive an ussd "wait for call" and then my device is supposed to ring but it doesn't.
    Incoming calls don't work either, the other party hear it's ringing but my device is not.
    My provider told me to enter the settings menu with a code they gave me, and set CC OPTION X:ON
    As this didn't work either, they suggests i change device. So i report the bug here.
    I'm not sure if this is related https://github.com/twbs/ratchet/issues/556

    Hi patata,
    Troubleshooting the specific build will help narrow down the issues, can you please provide the OS version of the phone and the provider?

  • Isdn bchan-number-order ascending round-robin is applied but not working

    isdn bchan-number-order ascending round-robin is applied but not working
    ios c3825-spservicesk9-mz.124-21.bin
    relevant config
    controller E1 0/3/0
     framing NO-CRC4
     pri-group timeslots 1-31
    interface Serial0/3/0:15
     no ip address
     encapsulation hdlc
     no logging event link-status
     no snmp trap link-status
     isdn switch-type primary-net5
     isdn overlap-receiving
     isdn incoming-voice voice
     isdn bchan-number-order ascending round-robin
     trunk-group 1
     no cdp enable
    my problem is this:-
    At the moment calls are leaving on the first available channel of my h323 voice gateway PRI, I can apply this command to the interface fine but it makes no difference the b cannels are always being picked on a first come  first served basis . I have also tried combination "isdn bchan-number-order decending" and "isdn bchan-number-order descending round-robin" but it makes no difference , the first b channel is always selected .
    Any ideas , if you think its a bug can u identify the bug id as I cannot find it .

    Hello
     I can see that you use ascending , that why you hit 1st channel.You have to choose one of these commands ascending or descending
    I have a question here , for your incoming calls which channel hits ?.FYI isdn bchan-number-order descending is enable by default , so if you need to change you have to type ascending. Can you just share incoming calls which channel hits?.This is because before you define your outgoing calls , you have to check your service provider channel used, and this to avoid error channel is not available.
    Command
    Router(config-if)# isdn bchan-number-order {ascending | descending}
    Purpose
    Enables B channel selection for outgoing calls on a PRI interface (optional).
    Thanks
    please rate all useful information

  • Calling Quit LabVIEW function in a callback VI is not working

    calling Quit LabVIEW function inside a Callback VI (of an activeX component) is not closing the current instance of LabVIEW.
    does anyone else have this issue?
    RENN
    LV2012SP1 64bit
    Kudos always welcome for helpful posts

    Sounds similar to this - https://decibel.ni.com/content/message/48506#48506
    The bug is that the Quit LV function does not work when called from a VI launched through Asynchronous Call By Reference
    AQ said that that bug was resolved in the 2013 beta, so you could try joining the beta to see if that solution also works for your case.
    Try to take over the world!

  • Php include not working

    Good Afternoon.
    I am having a hard time trying to find what needs to be set to allow url
    include statments in php on Netware 6.5 sp3, php5.
    I know my code is correct after trying it on an external server, and it
    seems all other php coding works. Just not the http includes as shown
    below:
    <?php
    include ('http://your.website.here/filenamehere.php');
    ?>
    php.ini is posted below:
    [PHP]
    ; About php.ini ;
    ; This file controls many aspects of PHP's behavior. In order for PHP to
    ; read it, it must be named 'php.ini'. PHP looks for it in the current
    ; working directory, in the path designated by the environment variable
    ; PHPRC, and in the path that was defined in compile time (in that order).
    ; Under Windows, the compile-time path is the Windows directory. The
    ; path in which the php.ini file is looked for can be overridden using
    ; the -c argument in command line mode.
    ; The syntax of the file is extremely simple. Whitespace and Lines
    ; beginning with a semicolon are silently ignored (as you probably
    guessed).
    ; Section headers (e.g. [Foo]) are also silently ignored, even though
    ; they might mean something in the future.
    ; Directives are specified using the following syntax:
    ; directive = value
    ; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
    ; The value can be a string, a number, a PHP constant (e.g. E_ALL or
    M_PI), one
    ; of the INI constants (On, Off, True, False, Yes, No and None) or an
    expression
    ; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
    ; Expressions in the INI file are limited to bitwise operators and
    parentheses:
    ; | bitwise OR
    ; & bitwise AND
    ; ~ bitwise NOT
    ; ! boolean NOT
    ; Boolean flags can be turned on using the values 1, On, True or Yes.
    ; They can be turned off using the values 0, Off, False or No.
    ; An empty string can be denoted by simply not writing anything after the
    equal
    ; sign, or by using the None keyword:
    ; foo = ; sets foo to an empty string
    ; foo = none ; sets foo to an empty string
    ; foo = "none" ; sets foo to the string 'none'
    ; If you use constants in your value, and these constants belong to a
    ; dynamically loaded extension (either a PHP extension or a Zend
    extension),
    ; you may only use these constants *after* the line that loads the
    extension.
    ; About this file ;
    ; This is the recommended, PHP 5-style version of the php.ini-dist file.
    It
    ; sets some non standard settings, that make PHP more efficient, more
    secure,
    ; and encourage cleaner coding.
    ; The price is that with these settings, PHP may be incompatible with some
    ; applications, and sometimes, more difficult to develop with. Using this
    ; file is warmly recommended for production sites. As all of the changes
    from
    ; the standard settings are thoroughly documented, you can go over each
    one,
    ; and decide whether you want to use it or not.
    ; For general information about the php.ini file, please consult the
    php.ini-dist
    ; file, included in your PHP distribution.
    ; This file is different from the php.ini-dist file in the fact that it
    features
    ; different values for several directives, in order to improve
    performance, while
    ; possibly breaking compatibility with the standard out-of-the-box
    behavior of
    ; PHP. Please make sure you read what's different, and modify your scripts
    ; accordingly, if you decide to use this file instead.
    ; - register_globals = Off [Security, Performance]
    ; Global variables are no longer registered for input data (POST, GET,
    cookies,
    ; environment and other server variables). Instead of using $foo, you
    must use
    ; you can use $_REQUEST["foo"] (includes any variable that arrives
    through the
    ; request, namely, POST, GET and cookie variables), or use one of the
    specific
    ; $_GET["foo"], $_POST["foo"], $_COOKIE["foo"] or $_FILES["foo"],
    depending
    ; on where the input originates. Also, you can look at the
    ; import_request_variables() function.
    ; Note that register_globals is going to be depracated (i.e., turned
    off by
    ; default) in the next version of PHP, because it often leads to
    security bugs.
    ; Read http://php.net/manual/en/security.registerglobals.php for
    further
    ; information.
    ; - register_long_arrays = Off [Performance]
    ; Disables registration of the older (and deprecated) long predefined
    array
    ; variables ($HTTP_*_VARS). Instead, use the superglobals that were
    ; introduced in PHP 4.1.0
    ; - display_errors = Off [Security]
    ; With this directive set to off, errors that occur during the
    execution of
    ; scripts will no longer be displayed as a part of the script output,
    and thus,
    ; will no longer be exposed to remote users. With some errors, the
    error message
    ; content may expose information about your script, web server, or
    database
    ; server that may be exploitable for hacking. Production sites should
    have this
    ; directive set to off.
    ; - log_errors = On [Security]
    ; This directive complements the above one. Any errors that occur
    during the
    ; execution of your script will be logged (typically, to your server's
    error log,
    ; but can be configured in several ways). Along with setting
    display_errors to off,
    ; this setup gives you the ability to fully understand what may have
    gone wrong,
    ; without exposing any sensitive information to remote users.
    ; - output_buffering = 4096 [Performance]
    ; Set a 4KB output buffer. Enabling output buffering typically
    results in less
    ; writes, and sometimes less packets sent on the wire, which can often
    lead to
    ; better performance. The gain this directive actually yields greatly
    depends
    ; on which Web server you're working with, and what kind of scripts
    you're using.
    ; - register_argc_argv = Off [Performance]
    ; Disables registration of the somewhat redundant $argv and $argc
    global
    ; variables.
    ; - magic_quotes_gpc = off [Performance]
    ; Input data is no longer escaped with slashes so that it can be sent
    into
    ; SQL databases without further manipulation. Instead, you should use
    the
    ; function addslashes() on each input element you wish to send to a
    database.
    ; - variables_order = "GPCS" [Performance]
    ; The environment variables are not hashed into the $_ENV. To access
    ; environment variables, you can use getenv() instead.
    ; - error_reporting = E_ALL [Code Cleanliness, Security(?)]
    ; By default, PHP surpresses errors of type E_NOTICE. These error
    messages
    ; are emitted for non-critical errors, but that could be a symptom of
    a bigger
    ; problem. Most notably, this will cause error messages about the use
    ; of uninitialized variables to be displayed.
    ; - allow_call_time_pass_reference = Off [Code cleanliness]
    ; It's not possible to decide to force a variable to be passed by
    reference
    ; when calling a function. The PHP 4 style to do this is by making the
    ; function require the relevant argument by reference.
    ; Language Options ;
    ; Enable the PHP scripting language engine under Apache.
    engine = On
    ; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
    zend.ze1_compatibility_mode = Off
    ; Allow the <? tag. Otherwise, only <?php and <script> tags are
    recognized.
    ; NOTE: Using short tags should be avoided when developing applications or
    ; libraries that are meant for redistribution, or deployment on PHP
    ; servers which are not under your control, because short tags may not
    ; be supported on the target server. For portable, redistributable code,
    ; be sure not to use short tags.
    short_open_tag = On
    ; Allow ASP-style <% %> tags.
    asp_tags = Off
    ; The number of significant digits displayed in floating point numbers.
    precision = 14
    ; Enforce year 2000 compliance (will cause problems with non-compliant
    browsers)
    y2k_compliance = On
    ; Output buffering allows you to send header lines (including cookies) even
    ; after you send body content, at the price of slowing PHP's output layer a
    ; bit. You can enable output buffering during runtime by calling the
    output
    ; buffering functions. You can also enable output buffering for all files
    by
    ; setting this directive to On. If you wish to limit the size of the
    buffer
    ; to a certain size - you can use a maximum number of bytes instead of
    'On', as
    ; a value for this directive (e.g., output_buffering=4096).
    output_buffering = 4096
    ; You can redirect all of the output of your scripts to a function. For
    ; example, if you set output_handler to "mb_output_handler", character
    ; encoding will be transparently converted to the specified encoding.
    ; Setting any output handler automatically turns on output buffering.
    ; Note: People who wrote portable scripts should not depend on this ini
    ; directive. Instead, explicitly set the output handler using
    ob_start().
    ; Using this ini directive may cause problems unless you know what
    script
    ; is doing.
    ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
    ; and you cannot use both "ob_gzhandler" and
    "zlib.output_compression".
    ; Note: output_handler must be empty if this is set 'On' !!!!
    ; Instead you must use zlib.output_handler.
    ;output_handler =
    ; Transparent output compression using the zlib library
    ; Valid values for this option are 'off', 'on', or a specific buffer size
    ; to be used for compression (default is 4KB)
    ; Note: Resulting chunk size may vary due to nature of compression. PHP
    ; outputs chunks that are few hundreds bytes each as a result of
    ; compression. If you prefer a larger chunk size for better
    ; performance, enable output_buffering in addition.
    ; Note: You need to use zlib.output_handler instead of the standard
    ; output_handler, or otherwise the output will be corrupted.
    zlib.output_compression = Off
    ; You cannot specify additional output handlers if zlib.output_compression
    ; is activated here. This setting does the same as output_handler but in
    ; a different order.
    ;zlib.output_handler =
    ; Implicit flush tells PHP to tell the output layer to flush itself
    ; automatically after every output block. This is equivalent to calling
    the
    ; PHP function flush() after each and every call to print() or echo() and
    each
    ; and every HTML block. Turning this option on has serious performance
    ; implications and is generally recommended for debugging purposes only.
    implicit_flush = off
    ; The unserialize callback function will be called (with the undefined
    class'
    ; name as parameter), if the unserializer finds an undefined class
    ; which should be instanciated.
    ; A warning appears if the specified function is not defined, or if the
    ; function doesn't include/implement the missing class.
    ; So only set this entry, if you really want to implement such a
    ; callback-function.
    unserialize_callback_func=
    ; When floats & doubles are serialized store serialize_precision
    significant
    ; digits after the floating point. The default value ensures that when
    floats
    ; are decoded with unserialize, the data will remain the same.
    serialize_precision = 100
    ; Whether to enable the ability to force arguments to be passed by
    reference
    ; at function call time. This method is deprecated and is likely to be
    ; unsupported in future versions of PHP/Zend. The encouraged method of
    ; specifying which arguments should be passed by reference is in the
    function
    ; declaration. You're encouraged to try and turn this option Off and make
    ; sure your scripts work properly with it in order to ensure they will work
    ; with future versions of the language (you will receive a warning each
    time
    ; you use this feature, and the argument will be passed by value instead
    of by
    ; reference).
    allow_call_time_pass_reference = Off
    ; Safe Mode
    safe_mode = off
    ; By default, Safe Mode does a UID compare check when
    ; opening files. If you want to relax this to a GID compare,
    ; then turn on safe_mode_gid.
    safe_mode_gid = Off
    ; When safe_mode is on, UID/GID checks are bypassed when
    ; including files from this directory and its subdirectories.
    ; (directory must also be in include_path or full path must
    ; be used when including)
    safe_mode_include_dir =
    ; When safe_mode is on, only executables located in the safe_mode_exec_dir
    ; will be allowed to be executed via the exec family of functions.
    safe_mode_exec_dir = "sys:/tmp"
    ; Setting certain environment variables may be a potential security breach.
    ; This directive contains a comma-delimited list of prefixes. In Safe
    Mode,
    ; the user may only alter environment variables whose names begin with the
    ; prefixes supplied here. By default, users will only be able to set
    ; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
    ; Note: If this directive is empty, PHP will let the user modify ANY
    ; environment variable!
    safe_mode_allowed_env_vars = PHP_
    ; This directive contains a comma-delimited list of environment variables
    that
    ; the end user won't be able to change using putenv(). These variables
    will be
    ; protected even if safe_mode_allowed_env_vars is set to allow to change
    them.
    safe_mode_protected_env_vars = LD_LIBRARY_PATH
    ; open_basedir, if set, limits all file operations to the defined directory
    ; and below. This directive makes most sense if used in a per-directory
    ; or per-virtualhost web server configuration file. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    ; By default this is also set to "sys:/tmp". This is actually the value
    that is
    ; set for the below mentioned "upload_tmp_dir" directive. If
    "upload_tmp_dir" is
    ; changed, change the same for "open_basedir" also. This is done to allow
    ; phpMyAdmin application users to execute SQL commands through an SQL file.
    open_basedir = ".;sys:/tmp"
    ; This directive allows you to disable certain functions for security
    reasons.
    ; It receives a comma-delimited list of function names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    disable_functions =
    ; This directive allows you to disable certain classes for security
    reasons.
    ; It receives a comma-delimited list of class names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    disable_classes =
    ; Colors for Syntax Highlighting mode. Anything that's acceptable in
    ; <font color="??????"> would work.
    ;highlight.string = #DD0000
    ;highlight.comment = #FF9900
    ;highlight.keyword = #007700
    ;highlight.bg = #FFFFFF
    ;highlight.default = #0000BB
    ;highlight.html = #000000
    ; Misc
    ; Decides whether PHP may expose the fact that it is installed on the
    server
    ; (e.g. by adding its signature to the Web server header). It is no
    security
    ; threat in any way, but it makes it possible to determine whether you use
    PHP
    ; on your server or not.
    expose_php = On
    ; Resource Limits ;
    max_execution_time = 30 ; Maximum execution time of each script, in
    seconds
    max_input_time = 60 ; Maximum amount of time each script may spend parsing
    request data
    memory_limit = 64M ; Maximum amount of memory a script may consume
    (8MB)
    ; Error handling and logging ;
    ; error_reporting is a bit-field. Or each number up to get desired error
    ; reporting level
    ; E_ALL - All errors and warnings (doesn't include E_STRICT)
    ; E_ERROR - fatal run-time errors
    ; E_WARNING - run-time warnings (non-fatal errors)
    ; E_PARSE - compile-time parse errors
    ; E_NOTICE - run-time notices (these are warnings which often
    result
    ; from a bug in your code, but it's possible that it
    was
    ; intentional (e.g., using an uninitialized variable
    and
    ; relying on the fact it's automatically initialized
    to an
    ; empty string)
    ; E_STRICT - run-time notices, enable to have PHP suggest changes
    ; to your code which will ensure the best
    interoperability
    ; and forward compatibility of your code
    ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
    ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
    ; initial startup
    ; E_COMPILE_ERROR - fatal compile-time errors
    ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
    ; E_USER_ERROR - user-generated error message
    ; E_USER_WARNING - user-generated warning message
    ; E_USER_NOTICE - user-generated notice message
    ; Examples:
    ; - Show all errors, except for notices and coding standards warnings
    ;error_reporting = E_ALL & ~E_NOTICE & ~E_STRICT
    ; - Show all errors, except for notices
    ;error_reporting = E_ALL & ~E_NOTICE
    ; - Show only errors
    ;error_reporting = E_COMPILE_ERROR|E_ERROR|E_CORE_ERROR
    ; - Show all errors
    error_reporting = E_ALL
    ; Print out errors (as a part of the output). For production web sites,
    ; you're strongly encouraged to turn this feature off, and use error
    logging
    ; instead (see below). Keeping display_errors enabled on a production web
    site
    ; may reveal security information to end users, such as file paths on your
    Web
    ; server, your database schema or other information.
    display_errors = Off
    ; Even when display_errors is on, errors that occur during PHP's startup
    ; sequence are not displayed. It's strongly recommended to keep
    ; display_startup_errors off, except for when debugging.
    display_startup_errors = Off
    ; Log errors into a log file (server-specific log, stderr, or error_log
    (below))
    ; As stated above, you're strongly advised to use error logging in place of
    ; error displaying on production web sites.
    log_errors = On
    ; Set maximum length of log_errors. In error_log information about the
    source is
    ; added. The default is 1024 and 0 allows to not apply any maximum length
    at all.
    log_errors_max_len = 1024
    ; Do not log repeated messages. Repeated errors must occur in same file on
    same
    ; line until ignore_repeated_source is set true.
    ignore_repeated_errors = Off
    ; Ignore source of message when ignoring repeated messages. When this
    setting
    ; is On you will not log errors with repeated messages from different
    files or
    ; sourcelines.
    ignore_repeated_source = Off
    ; If this parameter is set to Off, then memory leaks will not be shown (on
    ; stdout or in the log). This has only effect in a debug compile, and if
    ; error reporting includes E_WARNING in the allowed list
    report_memleaks = On
    ; Store the last error/warning message in $php_errormsg (boolean).
    track_errors = Off
    ; Disable the inclusion of HTML tags in error messages.
    ; Note: Never use this feature for production boxes.
    ;html_errors = Off
    ; If html_errors is set On PHP produces clickable error messages that
    direct
    ; to a page describing the error or function causing the error in detail.
    ; You can download a copy of the PHP manual from
    http://www.php.net/docs.php
    ; and change docref_root to the base URL of your local copy including the
    ; leading '/'. You must also specify the file extension being used
    including
    ; the dot.
    ; Note: Never use this feature for production boxes.
    ;docref_root = "/phpmanual/"
    ;docref_ext = .html
    ; String to output before an error message.
    ;error_prepend_string = "<font color=ff0000>"
    ; String to output after an error message.
    ;error_append_string = "</font>"
    ; Log errors to specified file.
    error_log = "sys:/php5/error.log"
    ; Log errors to syslog (Event Log on NT, not valid in Windows 95).
    ;error_log = syslog
    ; Data Handling ;
    ; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
    ; The separator used in PHP generated URLs to separate arguments.
    ; Default is "&".
    ;arg_separator.output = "&amp;"
    ; List of separator(s) used by PHP to parse input URLs into variables.
    ; Default is "&".
    ; NOTE: Every character in this directive is considered as separator!
    ;arg_separator.input = ";&"
    ; This directive describes the order in which PHP registers GET, POST,
    Cookie,
    ; Environment and Built-in variables (G, P, C, E & S respectively, often
    ; referred to as EGPCS or GPC). Registration is done from left to right,
    newer
    ; values override older values.
    variables_order = "GPCS"
    ; Whether or not to register the EGPCS variables as global variables. You
    may
    ; want to turn this off if you don't want to clutter your scripts' global
    scope
    ; with user data. This makes most sense when coupled with track_vars - in
    which
    ; case you can access all of the GPC variables through the $HTTP_*_VARS[],
    ; variables.
    ; You should do your best to write your scripts so that they do not require
    ; register_globals to be on; Using form variables as globals can easily
    lead
    ; to possible security problems, if the code is not very well thought of.
    register_globals = Off
    ; Whether or not to register the old-style input arrays, HTTP_GET_VARS
    ; and friends. If you're not using them, it's recommended to turn them
    off,
    ; for performance reasons.
    register_long_arrays = On
    ; This directive tells PHP whether to declare the argv&argc variables (that
    ; would contain the GET information). If you don't use these variables,
    you
    ; should turn it off for increased performance.
    register_argc_argv = Off
    ; Maximum size of POST data that PHP will accept.
    post_max_size = 8M
    ; Magic quotes
    ; Magic quotes for incoming GET/POST/Cookie data.
    magic_quotes_gpc = off
    ; Magic quotes for runtime-generated data, e.g. data from SQL, from
    exec(), etc.
    magic_quotes_runtime = off
    ; Use Sybase-style magic quotes (escape ' with '' instead of ').
    magic_quotes_sybase = Off
    ; Automatically add files before or after any PHP document.
    auto_prepend_file =
    auto_append_file =
    ; As of 4.0b4, PHP always outputs a character encoding by default in
    ; the Content-type: header. To disable sending of the charset, simply
    ; set it to be empty.
    ; PHP's built-in default is text/html
    default_mimetype = "text/html"
    ;default_charset = "iso-8859-1"
    ; Always populate the $HTTP_RAW_POST_DATA variable.
    ;always_populate_raw_post_data = On
    ; Paths and Directories ;
    ; UNIX: "/path1:/path2"
    ;include_path = ".:/php/includes"
    ; Windows: "path1;path2"
    ;include_path = ".;c:phpincludes"
    ; NetWare
    include_path = ".;sys:/php5/includes"
    ; The root of the PHP pages, used only if nonempty.
    ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
    ; if you are running php as a CGI under any web server (other than IIS)
    ; see documentation for security issues. The alternate is to use the
    ; cgi.force_redirect configuration below.
    doc_root =
    ; The directory under which PHP opens the script using /~username used only
    ; if nonempty.
    user_dir =
    ; Directory in which the loadable extensions (modules) reside.
    extension_dir = sys:/php5/ext
    ; Whether or not to enable the dl() function. The dl() function does NOT
    work
    ; properly in multithreaded servers, such as IIS or Zeus, and is
    automatically
    ; disabled on them.
    enable_dl = On
    ; cgi.force_redirect is necessary to provide security running PHP as a CGI
    under
    ; most web servers. Left undefined, PHP turns this on by default. You can
    ; turn it off here AT YOUR OWN RISK
    ; **You CAN safely turn this off for IIS, in fact, you MUST.**
    ; cgi.force_redirect = 1
    ; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
    ; every request.
    ; cgi.nph = 1
    ; if cgi.force_redirect is turned on, and you are not running under Apache
    or Netscape
    ; (iPlanet) web servers, you MAY need to set an environment variable name
    that PHP
    ; will look for to know it is OK to continue execution. Setting this
    variable MAY
    ; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
    ; cgi.redirect_status_env = ;
    ; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
    ; security tokens of the calling client. This allows IIS to define the
    ; security context that the request runs under. mod_fastcgi under Apache
    ; does not currently support this feature (03/17/2002)
    ; Set to 1 if running under IIS. Default is zero.
    ; fastcgi.impersonate = 1;
    ; cgi.rfc2616_headers configuration option tells PHP what type of headers
    to
    ; use when sending HTTP response code. If it's set 0 PHP sends Status:
    header that
    ; is supported by Apache. When this option is set to 1 PHP will send
    ; RFC2616 compliant header.
    ; Default is zero.
    ;cgi.rfc2616_headers = 0
    ; File Uploads ;
    ; Whether to allow HTTP file uploads.
    file_uploads = On
    ; Temporary directory for HTTP uploaded files (will use system default if
    not
    ; specified).
    upload_tmp_dir = sys:/tmp
    ; Maximum allowed size for uploaded files.
    upload_max_filesize = 100M
    ; Fopen wrappers ;
    ; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
    allow_url_fopen = On
    ; Define the anonymous ftp password (your email address)
    ;from="[email protected]"
    ; Define the User-Agent string
    ;user_agent="PHP"
    ; Default timeout for socket based streams (seconds)
    default_socket_timeout = 60
    ; If your scripts have to deal with files from Macintosh systems,
    ; or you are running on a Mac and need to deal with files from
    ; unix or win32 systems, setting this flag will cause PHP to
    ; automatically detect the EOL character in those files so that
    ; fgets() and file() will work regardless of the source of the file.
    ; auto_detect_line_endings = Off
    ; Dynamic Extensions ;
    ; If you wish to have an extension loaded automatically, use the following
    ; syntax:
    ; extension=modulename.extension
    ; For example, on Windows:
    ; extension=msql.dll
    ; ... or under UNIX:
    ; extension=msql.so
    ; Note that it should be the name of the module only; no directory
    information
    ; needs to go here. Specify the location of the extension with the
    ; extension_dir directive above.
    ;Windows Extensions
    ;Note that ODBC support is built in, so no dll is needed for it.
    ;extension=php_bz2.dll
    ;extension=php_cpdf.dll
    ;extension=php_curl.dll
    ;extension=php_dba.dll
    ;extension=php_dbase.dll
    ;extension=php_dbx.dll
    ;extension=php_exif.dll
    ;extension=php_fdf.dll
    ;extension=php_filepro.dll
    ;extension=php_gd2.dll
    ;extension=php_gettext.dll
    ;extension=php_ifx.dll
    ;extension=php_iisfunc.dll
    ;extension=php_imap.dll
    ;extension=php_interbase.dll
    ;extension=php_java.dll
    ;extension=php_ldap.dll
    ;extension=php_mbstring.dll
    ;extension=php_mcrypt.dll
    ;extension=php_mhash.dll
    ;extension=php_mime_magic.dll
    ;extension=php_ming.dll
    ;extension=php_mssql.dll
    ;extension=php_msql.dll
    ;extension=php_mysql.dll
    ;extension=php_oci8.dll
    ;extension=php_openssl.dll
    ;extension=php_oracle.dll
    ;extension=php_pdf.dll
    ;extension=php_pgsql.dll
    ;extension=php_shmop.dll
    ;extension=php_snmp.dll
    ;extension=php_sockets.dll
    ;extension=php_sybase_ct.dll
    ;extension=php_tidy.dll
    ;extension=php_w32api.dll
    ;extension=php_xmlrpc.dll
    ;extension=php_xsl.dll
    ;extension=php_yaz.dll
    ;extension=php_zip.dll
    ;NetWare Extensions
    extension=php_ldap.nlm
    extension=phpmysql.nlm
    extension=php2ucs.nlm
    extension=php_xml.nlm
    extension=php_ossl.nlm
    ; Module Settings ;
    [Syslog]
    ; Whether or not to define the various syslog variables (e.g. $LOG_PID,
    ; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
    ; runtime, you can define these variables by calling
    define_syslog_variables().
    define_syslog_variables = Off
    [mail function]
    ; For Win32 only.
    ;SMTP =
    ;smtp_port = 25
    ; For Win32 only.
    ; sendmail_from =
    ; For Unix only. You may supply arguments as well (default: "sendmail -t
    -i").
    ;sendmail_path =
    ; Force the addition of the specified parameters to be passed as extra
    parameters
    ; to the sendmail binary. These parameters will always replace the value
    of
    ; the 5th parameter to mail(), even in safe mode.
    ;mail.force_extra_parameters =
    [SQL]
    sql.safe_mode = Off
    [ODBC]
    ;odbc.default_db = Not yet implemented
    ;odbc.default_user = Not yet implemented
    ;odbc.default_pw = Not yet implemented
    ; Allow or prevent persistent links.
    odbc.allow_persistent = On
    ; Check that a connection is still valid before reuse.
    odbc.check_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    odbc.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no
    limit.
    odbc.max_links = -1
    ; Handling of LONG fields. Returns number of bytes to variables. 0 means
    ; passthru.
    odbc.defaultlrl = 4096
    ; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to
    char.
    ; See the documentation on odbc_binmode and odbc_longreadlen for an
    explanation
    ; of uodbc.defaultlrl and uodbc.defaultbinmode
    odbc.defaultbinmode = 1
    [MySQL]
    ; Allow or prevent persistent links.
    mysql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    mysql.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no
    limit.
    mysql.max_links = -1
    ; Default port number for mysql_connect(). If unset, mysql_connect() will
    use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order). Win32 will only
    look
    ; at MYSQL_PORT.
    mysql.default_port =
    ; Default socket name for local MySQL connects. If empty, uses the
    built-in
    ; MySQL defaults.
    mysql.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    mysql.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    mysql.default_user =
    ; Default password for mysql_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo
    get_cfg_var("mysql.default_password")
    ; and reveal this password! And of course, any users with read access to
    this
    ; file will be able to reveal the password as well.
    mysql.default_password =
    ; Maximum time (in secondes) for connect timeout. -1 means no limit
    mysql.connect_timeout = 60
    ; Trace mode. When trace_mode is active (=On), warnings for table/index
    scans and
    ; SQL-Errors will be displayed.
    mysql.trace_mode = Off
    [MySQLI]
    ; Maximum number of links. -1 means no limit.
    mysqli.max_links = -1
    ; Default port number for mysqli_connect(). If unset, mysqli_connect()
    will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order). Win32 will only
    look
    ; at MYSQL_PORT.
    mysqli.default_port = 3306
    ; Default socket name for local MySQL connects. If empty, uses the
    built-in
    ; MySQL defaults.
    mysqli.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    mysqli.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    mysqli.default_user =
    ; Default password for mysqli_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo
    get_cfg_var("mysqli.default_password")
    ; and reveal this password! And of course, any users with read access to
    this
    ; file will be able to reveal the password as well.
    mysqli.default_password =
    ; Allow or prevent reconnect
    mysqli.reconnect = Off
    [mSQL]
    ; Allow or prevent persistent links.
    msql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    msql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    msql.max_links = -1
    [PostgresSQL]
    ; Allow or prevent persistent links.
    pgsql.allow_persistent = On
    ; Detect broken persistent links always with pg_pconnect().
    ; Auto reset feature requires a little overheads.
    pgsql.auto_reset_persistent = Off
    ; Maximum number of persistent links. -1 means no limit.
    pgsql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    pgsql.max_links = -1
    ; Ignore PostgreSQL backends Notice message or not.
    ; Notice message logging require a little overheads.
    pgsql.ignore_notice = 0
    ; Log PostgreSQL backends Noitce message or not.
    ; Unless pgsql.ignore_notice=0, module cannot log notice message.
    pgsql.log_notice = 0
    [Sybase]
    ; Allow or prevent persistent links.
    sybase.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    sybase.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no
    limit.
    sybase.max_links = -1
    ;sybase.interface_file = "/usr/sybase/interfaces"
    ; Minimum error severity to display.
    sybase.min_error_severity = 10
    ; Minimum message severity to display.
    sybase.min_message_severity = 10
    ; Compatability mode with old versions of PHP 3.0.
    ; If on, this will cause PHP to automatically assign types to results
    according
    ; to their Sybase type, instead of treating them all as strings. This
    ; compatability mode will probably not stay around forever, so try applying
    ; whatever necessary changes to your code, and turn it off.
    sybase.compatability_mode = Off
    [Sybase-CT]
    ; Allow or prevent persistent links.
    sybct.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    sybct.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no
    limit.
    sybct.max_links = -1
    ; Minimum server message severity to display.
    sybct.min_server_severity = 10
    ; Minimum client message severity to display.
    sybct.min_client_severity = 10
    [dbx]
    ; returned column names can be converted for compatibility reasons
    ; possible values for dbx.colnames_case are
    ; "unchanged" (default, if not set)
    ; "lowercase"
    ; "uppercase"
    ; the recommended default is either upper- or lowercase, but
    ; unchanged is currently set for backwards compatibility
    dbx.colnames_case = "lowercase"
    [bcmath]
    ; Number of decimal digits for all bcmath functions.
    bcmath.scale = 0
    [browscap]
    ;browscap = extra/browscap.ini
    [Informix]
    ; Default host for ifx_connect() (doesn't apply in safe mode).
    ifx.default_host =
    ; Default user for ifx_connect() (doesn't apply in safe mode).
    ifx.default_user =
    ; Default password for ifx_connect() (doesn't apply in safe mode).
    ifx.default_password =
    ; Allow or prevent persistent links.
    ifx.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    ifx.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no
    limit.
    ifx.max_links = -1
    ; If on, select statements return the contents of a text blob instead of
    its id.
    ifx.textasvarchar = 0
    ; If on, select statements return the contents of a byte blob instead of
    its id.
    ifx.byteasvarchar = 0
    ; Trailing blanks are stripped from fixed-length char columns. May help
    the
    ; life of Informix SE users.
    ifx.charasvarchar = 0
    ; If on, the contents of text and byte blobs are dumped to a file instead
    of
    ; keeping them in memory.
    ifx.blobinfile = 0
    ; NULL's are returned as empty strings, unless this is set to 1. In that
    case,
    ; NULL's are returned as string 'NULL'.
    ifx.nullformat = 0
    [Session]
    ; Handler used to store/retrieve data.
    session.save_handler = files
    ; Argument passed to save_handler. In the case of files, this is the path
    ; where data files are stored. Note: Windows users have to change this
    ; variable in order to use PHP's session functions.
    ; As of PHP 4.0.1, you can define the path as:
    ; session.save_path = "N;/path"
    ; where N is an integer. Instead of storing all the session files in
    ; /path, what this will do is use subdirectories N-levels deep, and
    ; store the session data in those directories. This is useful if you
    ; or your OS have problems with lots of files in one directory, and is
    ; a more efficient layout for servers that handle lots of sessions.
    ; NOTE 1: PHP will not create this directory structure automatically.
    ; You can use the script in the ext/session dir for that purpose.
    ; NOTE 2: See the section on garbage collection below if you choose to
    ; use subdirectories for session storage
    ; The file storage module creates files using mode 600 by default.
    ; You can change that by using
    ; session.save_path = "N;MODE;/path"
    ; where MODE is the octal representation of the mode. Note that this
    ; does not overwrite the process's umask.
    ;session.save_path = "/tmp"
    session.save_path = sys:/php5/sessiondata
    ; Whether to use cookies.
    session.use_cookies = 1
    ; This option enables administrators to make their users invulnerable to
    ; attacks which involve passing session ids in URLs; defaults to 0.
    ; session.use_only_cookies = 1
    ; Name of the session (used as cookie name).
    session.name = PHPSESSID
    ; Initialize session on request startup.
    session.auto_start = 0
    ; Lifetime in seconds of cookie or, if 0, until browser is restarted.
    session.cookie_lifetime = 0
    ; The path for which the cookie is valid.
    session.cookie_path = /
    ; The domain for which the cookie is valid.
    session.cookie_domain =
    ; Handler used to serialize data. php is the standard serializer of PHP.
    session.serialize_handler = php
    ; Define the probability that the 'garbage collection' process is started
    ; on every session initialization.
    ; The probability is calculated by using gc_probability/gc_divisor,
    ; e.g. 1/100 means there is a 1% chance that the GC process starts
    ; on each request.
    session.gc_probability = 1
    session.gc_divisor = 1000
    ; After this number of seconds, stored data will be seen as 'garbage' and
    ; cleaned up by the garbage collection process.
    session.gc_maxlifetime = 1440
    ; NOTE: If you are using the subdirectory option for storing session files
    ; (see session.save_path above), then garbage collection does *not*
    ; happen automatically. You will need to do your own garbage
    ; collection through a shell script, cron entry, or some other
    method.
    ; For example, the following script would is the equivalent of
    ; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
    ; cd /path/to/sessions; find -cmin +24 | xargs rm
    ; PHP 4.2 and less have an undocumented feature/bug that allows you to
    ; to initialize a session variable in the global scope, albeit
    register_globals
    ; is disabled. PHP 4.3 and later will warn you, if this feature is used.
    ; You can disable the feature and the warning separately. At this time,
    ; the warning is only displayed, if bug_compat_42 is enabled.
    session.bug_compat_42 = 0
    session.bug_compat_warn = 0
    ; Check HTTP Referer to invalidate externally stored URLs containing ids.
    ; HTTP_REFERER has to contain this substring for the session to be
    ; considered as valid.
    session.referer_check =
    ; How many bytes to read from the file.
    session.entropy_length = 0
    ; Specified here to create the session id.
    session.entropy_file =
    ;session.entropy_length = 16
    ;session.entropy_file = /dev/urandom
    ; Set to {nocache,private,public,} to determine HTTP caching aspects
    ; or leave this empty to avoid sending anti-caching headers.
    session.cache_limiter = nocache
    ; Document expires after n minutes.
    session.cache_expire = 180
    ; trans sid support is disabled by default.
    ; Use of trans sid may risk your users security.
    ; Use this option with caution.
    ; - User may send URL contains active session ID
    ; to other person via. email/irc/etc.
    ; - URL that contains active session ID may be stored
    ; in publically accessible computer.
    ; - User may access your site with the same session ID
    ; always using URL stored in browser's history or bookmarks.
    session.use_trans_sid = 0
    ; Select a hash function
    ; 0: MD5 (128 bits)
    ; 1: SHA-1 (160 bits)
    session.hash_function = 0
    ; Define how many bits are stored in each character when converting
    ; the binary hash data to something readable.
    ; 4 bits: 0-9, a-f
    ; 5 bits: 0-9, a-v
    ; 6 bits: 0-9, a-z, A-Z, "-", ","
    session.hash_bits_per_character = 5
    ; The URL rewriter will look for URLs in a defined set of HTML tags.
    ; form/fieldset are special; if you include them here, the rewriter will
    ; add a hidden <input> field with the info which is otherwise appended
    ; to URLs. If you want XHTML conformity, remove the form entry.
    ; Note that all valid entries require a "=", even if no value follows.
    url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeent ry"
    [MSSQL]
    ; Allow or prevent persistent links.
    mssql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    mssql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    mssql.max_links = -1
    ; Minimum error severity to display.
    mssql.min_error_severity = 10
    ; Minimum message severity to display.
    mssql.min_message_severity = 10
    ; Compatability mode with old versions of PHP 3.0.
    mssql.compatability_mode = Off
    ; Connect timeout
    ;mssql.connect_timeout = 5
    ; Query timeout
    ;mssql.timeout = 60
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textlimit = 4096
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textsize = 4096
    ; Limits the number of records in each batch. 0 = all records in one
    batch.
    ;mssql.batchsize = 0
    ; Specify how datetime and datetim4 columns are returned
    ; On => Returns data converted to SQL server settings
    ; Off => Returns values as YYYY-MM-DD hh:mm:ss
    ;mssql.datetimeconvert = On
    ; Use NT authentication when connecting to the server
    mssql.secure_connection = Off
    ; Specify max number of processes. Default = 25
    ;mssql.max_procs = 25
    [Assertion]
    ; Assert(expr); active by default.
    ;assert.active = On
    ; Issue a PHP warning for each failed assertion.
    ;assert.warning = On
    ; Don't bail out by default.
    ;assert.bail = Off
    ; User-function to be called if an assertion fails.
    ;assert.callback = 0
    ; Eval the expression with current error_reporting(). Set to true if you
    want
    ; error_reporting(0) around the eval().
    ;assert.quiet_eval = 0
    [Ingres II]
    ; Allow or prevent persistent links.
    ingres.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    ingres.max_persistent = -1
    ; Maximum number of links, including persistents. -1 means no limit.
    ingres.max_links = -1
    ; Default database (format: [node_id::]dbname[/srv_class]).
    ingres.default_database =
    ; Default user.
    ingres.default_user =
    ; Default password.
    ingres.default_password =
    [Verisign Payflow Pro]
    ; Default Payflow Pro server.
    pfpro.defaulthost = "test-payflow.verisign.com"
    ; Default port to connect to.
    pfpro.defaultport = 443
    ; Default timeout in seconds.
    pfpro.defaulttimeout = 30
    ; Default proxy IP address (if required).
    ;pfpro.proxyaddress =
    ; Default proxy port.
    ;pfpro.proxyport =
    ; Default proxy logon.
    ;pfpro.proxylogon =
    ; Default proxy password.
    ;pfpro.proxypassword =
    [Sockets]
    ; Use the system read() function instead of the php_read() wrapper.
    sockets.use_system_read = On
    [com]
    ; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
    ;com.typelib_file =
    ; allow Distributed-COM calls
    ;com.allow_dcom = true
    ; autoregister constants of a components typlib on com_load()
    ;com.autoregister_typelib = true
    ; register constants casesensitive
    ;com.autoregister_casesensitive = false
    ; show warnings on duplicate constat registrations
    ;com.autoregister_verbose = true
    [LDAP]
    ; Path to a directory which contains SSL certificates to be used for LDAP
    over SSL
    ; Terminate the path with /
    ldap.ssl_cert_dir = "sys:/php5/cert/"
    [mbstring]
    ; language for internal character representation.
    ;mbstring.language = Japanese
    ; internal/script encoding.
    ; Some encoding cannot work as internal encoding.
    ; (e.g. SJIS, BIG5, ISO-2022-*)
    ;mbstring.internal_encoding = EUC-JP
    ; http input encoding.
    ;mbstring.http_input = auto
    ; http output encoding. mb_output_handler must be
    ; registered as output buffer to function
    ;mbstring.http_output = SJIS
    ; enable automatic encoding translation accoding to
    ; mbstring.internal_encoding setting. Input chars are
    ; converted to internal encoding by setting this to On.
    ; Note: Do _not_ use automatic encoding translation for
    ; portable libs/applications.
    ;mbstring.encoding_translation = Off
    ; automatic encoding detection order.
    ; auto means
    ;mbstring.detect_order = auto
    ; substitute_character used when character cannot be converted
    ; one from another
    ;mbstring.substitute_character = none;
    ; overload(replace) single byte functions by mbstring functions.
    ; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
    ; etc. Possible values are 0,1,2,4 or combination of them.
    ; For example, 7 for overload everything.
    ; 0: No overload
    ; 1: Overload mail() function
    ; 2: Overload str*() functions
    ; 4: Overload ereg*() functions
    ;mbstring.func_overload = 0
    [FrontBase]
    ;fbsql.allow_persistent = On
    ;fbsql.autocommit = On
    ;fbsql.default_database =
    ;fbsql.default_database_password =
    ;fbsql.default_host =
    ;fbsql.default_password =
    ;fbsql.default_user = "_SYSTEM"
    ;fbsql.generate_warnings = Off
    ;fbsql.max_connections = 128
    ;fbsql.max_links = 128
    ;fbsql.max_persistent = -1
    ;fbsql.max_results = 128
    ;fbsql.batchSize = 1000
    [exif]
    ; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as
    JIS.
    ; With mbstring support this will automatically be converted into the
    encoding
    ; given by corresponding encode setting. When empty
    mbstring.internal_encoding
    ; is used. For the decode settings you can distinguish between motorola
    and
    ; intel byte order. A decode setting cannot be empty.
    ;exif.encode_unicode = ISO-8859-15
    ;exif.decode_unicode_motorola = UCS-2BE
    ;exif.decode_unicode_intel = UCS-2LE
    ;exif.encode_jis =
    ;exif.decode_jis_motorola = JIS
    ;exif.decode_jis_intel = JIS
    [Tidy]
    ; The path to a default tidy configuration file to use when using tidy
    ;tidy.default_config = /usr/local/lib/php/default.tcfg
    ; Should tidy clean and repair output automatically?
    ; WARNING: Do not use this option if you are generating non-html content
    ; such as dynamic images
    tidy.clean_output = Off
    [soap]
    ; Enables or disables WSDL caching feature.
    soap.wsdl_cache_enabled=1
    ; Sets the directory name where SOAP extension will put cache files.
    soap.wsdl_cache_dir="/tmp"
    ; (time to live) Sets the number of second while cached file will be used
    ; instead of original one.
    soap.wsdl_cache_ttl=86400
    ; Local Variables:
    ; tab-width: 4
    ; End:
    [Imagemagick Extension - Added By GKO - 08.01.05]
    extension=php_imagick.nlm
    Thank you for any insight you can give ... I am not a php person.
    Tony

    Tony,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • [SOLVED] SQLite not working with PHP

    For reasons unknown, I cannot get PHP to work properly with SQLite. I have uncommented the "extension=sqlite.so" in /etc/php/php.ini, ensured that PHP's configuration was being loaded from said file, and made sure PHP was working fine with my server of choice (lighttpd). Unfortunately, it doesn't seem to work, as evidenced by
    Fatal error: Call to undefined function sqlite_open() in test.php on line x
    Which is what PHP spits at me. I've checked lighty's logs and nothing's wrong. PHP's set to send to syslog, so I'm not sure where I could check on that. Here is a quick look at PHP's setup.
    My /etc/php/php.ini:
    [PHP]
    ; About php.ini ;
    ; This file controls many aspects of PHP's behavior. In order for PHP to
    ; read it, it must be named 'php.ini'. PHP looks for it in the current
    ; working directory, in the path designated by the environment variable
    ; PHPRC, and in the path that was defined in compile time (in that order).
    ; The path in which the php.ini file is looked for can be overridden using
    ; the -c argument in command line mode.
    ; The syntax of the file is extremely simple. Whitespace and Lines
    ; beginning with a semicolon are silently ignored (as you probably guessed).
    ; Section headers (e.g. [Foo]) are also silently ignored, even though
    ; they might mean something in the future.
    ; Directives are specified using the following syntax:
    ; directive = value
    ; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
    ; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
    ; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
    ; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
    ; Expressions in the INI file are limited to bitwise operators and parentheses:
    ; | bitwise OR
    ; & bitwise AND
    ; ~ bitwise NOT
    ; ! boolean NOT
    ; Boolean flags can be turned on using the values 1, On, True or Yes.
    ; They can be turned off using the values 0, Off, False or No.
    ; An empty string can be denoted by simply not writing anything after the equal
    ; sign, or by using the None keyword:
    ; foo = ; sets foo to an empty string
    ; foo = none ; sets foo to an empty string
    ; foo = "none" ; sets foo to the string 'none'
    ; If you use constants in your value, and these constants belong to a
    ; dynamically loaded extension (either a PHP extension or a Zend extension),
    ; you may only use these constants *after* the line that loads the extension.
    ; About this file ;
    ; This is the recommended, PHP 5-style version of the php.ini-dist file. It
    ; sets some non standard settings, that make PHP more efficient, more secure,
    ; and encourage cleaner coding.
    ; The price is that with these settings, PHP may be incompatible with some
    ; applications, and sometimes, more difficult to develop with. Using this
    ; file is warmly recommended for production sites. As all of the changes from
    ; the standard settings are thoroughly documented, you can go over each one,
    ; and decide whether you want to use it or not.
    ; For general information about the php.ini file, please consult the php.ini-dist
    ; file, included in your PHP distribution.
    ; This file is different from the php.ini-dist file in the fact that it features
    ; different values for several directives, in order to improve performance, while
    ; possibly breaking compatibility with the standard out-of-the-box behavior of
    ; PHP. Please make sure you read what's different, and modify your scripts
    ; accordingly, if you decide to use this file instead.
    ; - register_long_arrays = Off [Performance]
    ; Disables registration of the older (and deprecated) long predefined array
    ; variables ($HTTP_*_VARS). Instead, use the superglobals that were
    ; introduced in PHP 4.1.0
    ; - display_errors = Off [Security]
    ; With this directive set to off, errors that occur during the execution of
    ; scripts will no longer be displayed as a part of the script output, and thus,
    ; will no longer be exposed to remote users. With some errors, the error message
    ; content may expose information about your script, web server, or database
    ; server that may be exploitable for hacking. Production sites should have this
    ; directive set to off.
    ; - log_errors = On [Security]
    ; This directive complements the above one. Any errors that occur during the
    ; execution of your script will be logged (typically, to your server's error log,
    ; but can be configured in several ways). Along with setting display_errors to off,
    ; this setup gives you the ability to fully understand what may have gone wrong,
    ; without exposing any sensitive information to remote users.
    ; - output_buffering = 4096 [Performance]
    ; Set a 4KB output buffer. Enabling output buffering typically results in less
    ; writes, and sometimes less packets sent on the wire, which can often lead to
    ; better performance. The gain this directive actually yields greatly depends
    ; on which Web server you're working with, and what kind of scripts you're using.
    ; - register_argc_argv = Off [Performance]
    ; Disables registration of the somewhat redundant $argv and $argc global
    ; variables.
    ; - magic_quotes_gpc = Off [Performance]
    ; Input data is no longer escaped with slashes so that it can be sent into
    ; SQL databases without further manipulation. Instead, you should use the
    ; database vendor specific escape string function on each input element you
    ; wish to send to a database.
    ; - variables_order = "GPCS" [Performance]
    ; The environment variables are not hashed into the $_ENV. To access
    ; environment variables, you can use getenv() instead.
    ; - error_reporting = E_ALL [Code Cleanliness, Security(?)]
    ; By default, PHP suppresses errors of type E_NOTICE. These error messages
    ; are emitted for non-critical errors, but that could be a symptom of a bigger
    ; problem. Most notably, this will cause error messages about the use
    ; of uninitialized variables to be displayed.
    ; - allow_call_time_pass_reference = Off [Code cleanliness]
    ; It's not possible to decide to force a variable to be passed by reference
    ; when calling a function. The PHP 4 style to do this is by making the
    ; function require the relevant argument by reference.
    ; - short_open_tag = Off [Portability]
    ; Using short tags is discouraged when developing code meant for redistribution
    ; since short tags may not be supported on the target server.
    ; Language Options ;
    ; Enable the PHP scripting language engine under Apache.
    engine = On
    ; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
    zend.ze1_compatibility_mode = Off
    ; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized.
    ; NOTE: Using short tags should be avoided when developing applications or
    ; libraries that are meant for redistribution, or deployment on PHP
    ; servers which are not under your control, because short tags may not
    ; be supported on the target server. For portable, redistributable code,
    ; be sure not to use short tags.
    short_open_tag = Off
    ; Allow ASP-style <% %> tags.
    asp_tags = Off
    ; The number of significant digits displayed in floating point numbers.
    precision = 14
    ; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
    y2k_compliance = On
    ; Output buffering allows you to send header lines (including cookies) even
    ; after you send body content, at the price of slowing PHP's output layer a
    ; bit. You can enable output buffering during runtime by calling the output
    ; buffering functions. You can also enable output buffering for all files by
    ; setting this directive to On. If you wish to limit the size of the buffer
    ; to a certain size - you can use a maximum number of bytes instead of 'On', as
    ; a value for this directive (e.g., output_buffering=4096).
    output_buffering = 4096
    ; You can redirect all of the output of your scripts to a function. For
    ; example, if you set output_handler to "mb_output_handler", character
    ; encoding will be transparently converted to the specified encoding.
    ; Setting any output handler automatically turns on output buffering.
    ; Note: People who wrote portable scripts should not depend on this ini
    ; directive. Instead, explicitly set the output handler using ob_start().
    ; Using this ini directive may cause problems unless you know what script
    ; is doing.
    ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
    ; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
    ; Note: output_handler must be empty if this is set 'On' !!!!
    ; Instead you must use zlib.output_handler.
    ;output_handler =
    ; Transparent output compression using the zlib library
    ; Valid values for this option are 'off', 'on', or a specific buffer size
    ; to be used for compression (default is 4KB)
    ; Note: Resulting chunk size may vary due to nature of compression. PHP
    ; outputs chunks that are few hundreds bytes each as a result of
    ; compression. If you prefer a larger chunk size for better
    ; performance, enable output_buffering in addition.
    ; Note: You need to use zlib.output_handler instead of the standard
    ; output_handler, or otherwise the output will be corrupted.
    zlib.output_compression = Off
    ;zlib.output_compression_level = -1
    ; You cannot specify additional output handlers if zlib.output_compression
    ; is activated here. This setting does the same as output_handler but in
    ; a different order.
    ;zlib.output_handler =
    ; Implicit flush tells PHP to tell the output layer to flush itself
    ; automatically after every output block. This is equivalent to calling the
    ; PHP function flush() after each and every call to print() or echo() and each
    ; and every HTML block. Turning this option on has serious performance
    ; implications and is generally recommended for debugging purposes only.
    implicit_flush = Off
    ; The unserialize callback function will be called (with the undefined class'
    ; name as parameter), if the unserializer finds an undefined class
    ; which should be instantiated.
    ; A warning appears if the specified function is not defined, or if the
    ; function doesn't include/implement the missing class.
    ; So only set this entry, if you really want to implement such a
    ; callback-function.
    unserialize_callback_func=
    ; When floats & doubles are serialized store serialize_precision significant
    ; digits after the floating point. The default value ensures that when floats
    ; are decoded with unserialize, the data will remain the same.
    serialize_precision = 100
    ; Whether to enable the ability to force arguments to be passed by reference
    ; at function call time. This method is deprecated and is likely to be
    ; unsupported in future versions of PHP/Zend. The encouraged method of
    ; specifying which arguments should be passed by reference is in the function
    ; declaration. You're encouraged to try and turn this option Off and make
    ; sure your scripts work properly with it in order to ensure they will work
    ; with future versions of the language (you will receive a warning each time
    ; you use this feature, and the argument will be passed by value instead of by
    ; reference).
    allow_call_time_pass_reference = Off
    ; Safe Mode
    safe_mode = Off
    ; By default, Safe Mode does a UID compare check when
    ; opening files. If you want to relax this to a GID compare,
    ; then turn on safe_mode_gid.
    safe_mode_gid = Off
    ; When safe_mode is on, UID/GID checks are bypassed when
    ; including files from this directory and its subdirectories.
    ; (directory must also be in include_path or full path must
    ; be used when including)
    safe_mode_include_dir =
    ; When safe_mode is on, only executables located in the safe_mode_exec_dir
    ; will be allowed to be executed via the exec family of functions.
    safe_mode_exec_dir =
    ; Setting certain environment variables may be a potential security breach.
    ; This directive contains a comma-delimited list of prefixes. In Safe Mode,
    ; the user may only alter environment variables whose names begin with the
    ; prefixes supplied here. By default, users will only be able to set
    ; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
    ; Note: If this directive is empty, PHP will let the user modify ANY
    ; environment variable!
    safe_mode_allowed_env_vars = PHP_
    ; This directive contains a comma-delimited list of environment variables that
    ; the end user won't be able to change using putenv(). These variables will be
    ; protected even if safe_mode_allowed_env_vars is set to allow to change them.
    safe_mode_protected_env_vars = LD_LIBRARY_PATH
    ; open_basedir, if set, limits all file operations to the defined directory
    ; and below. This directive makes most sense if used in a per-directory
    ; or per-virtualhost web server configuration file. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    open_basedir = /srv/http/:/home/:/tmp/:/usr/share/pear/
    ; This directive allows you to disable certain functions for security reasons.
    ; It receives a comma-delimited list of function names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    disable_functions =
    ; This directive allows you to disable certain classes for security reasons.
    ; It receives a comma-delimited list of class names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    disable_classes =
    ; Colors for Syntax Highlighting mode. Anything that's acceptable in
    ; <span style="color: ???????"> would work.
    ;highlight.string = #DD0000
    ;highlight.comment = #FF9900
    ;highlight.keyword = #007700
    ;highlight.bg = #FFFFFF
    ;highlight.default = #0000BB
    ;highlight.html = #000000
    ; If enabled, the request will be allowed to complete even if the user aborts
    ; the request. Consider enabling it if executing long request, which may end up
    ; being interrupted by the user or a browser timing out.
    ; ignore_user_abort = On
    ; Determines the size of the realpath cache to be used by PHP. This value should
    ; be increased on systems where PHP opens many files to reflect the quantity of
    ; the file operations performed.
    ; realpath_cache_size=16k
    ; Duration of time, in seconds for which to cache realpath information for a given
    ; file or directory. For systems with rarely changing files, consider increasing this
    ; value.
    ; realpath_cache_ttl=120
    ; Misc
    ; Decides whether PHP may expose the fact that it is installed on the server
    ; (e.g. by adding its signature to the Web server header). It is no security
    ; threat in any way, but it makes it possible to determine whether you use PHP
    ; on your server or not.
    expose_php = Off
    ; Resource Limits ;
    max_execution_time = 30 ; Maximum execution time of each script, in seconds
    max_input_time = 60 ; Maximum amount of time each script may spend parsing request data
    ;max_input_nesting_level = 64 ; Maximum input variable nesting level
    memory_limit = 32M ; Maximum amount of memory a script may consume (32MB)
    ; Error handling and logging ;
    ; error_reporting is a bit-field. Or each number up to get desired error
    ; reporting level
    ; E_ALL - All errors and warnings (doesn't include E_STRICT)
    ; E_ERROR - fatal run-time errors
    ; E_RECOVERABLE_ERROR - almost fatal run-time errors
    ; E_WARNING - run-time warnings (non-fatal errors)
    ; E_PARSE - compile-time parse errors
    ; E_NOTICE - run-time notices (these are warnings which often result
    ; from a bug in your code, but it's possible that it was
    ; intentional (e.g., using an uninitialized variable and
    ; relying on the fact it's automatically initialized to an
    ; empty string)
    ; E_STRICT - run-time notices, enable to have PHP suggest changes
    ; to your code which will ensure the best interoperability
    ; and forward compatibility of your code
    ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
    ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
    ; initial startup
    ; E_COMPILE_ERROR - fatal compile-time errors
    ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
    ; E_USER_ERROR - user-generated error message
    ; E_USER_WARNING - user-generated warning message
    ; E_USER_NOTICE - user-generated notice message
    ; Examples:
    ; - Show all errors, except for notices and coding standards warnings
    ;error_reporting = E_ALL & ~E_NOTICE
    ; - Show all errors, except for notices
    ;error_reporting = E_ALL & ~E_NOTICE | E_STRICT
    ; - Show only errors
    ;error_reporting = E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR
    ; - Show all errors, except coding standards warnings
    error_reporting = E_ALL
    ; Print out errors (as a part of the output). For production web sites,
    ; you're strongly encouraged to turn this feature off, and use error logging
    ; instead (see below). Keeping display_errors enabled on a production web site
    ; may reveal security information to end users, such as file paths on your Web
    ; server, your database schema or other information.
    ; possible values for display_errors:
    ; Off - Do not display any errors
    ; stderr - Display errors to STDERR (affects only CGI/CLI binaries!)
    ; On or stdout - Display errors to STDOUT (default)
    ; To output errors to STDERR with CGI/CLI:
    ;display_errors = "stderr"
    ; Default
    display_errors = On
    ; Even when display_errors is on, errors that occur during PHP's startup
    ; sequence are not displayed. It's strongly recommended to keep
    ; display_startup_errors off, except for when debugging.
    display_startup_errors = Off
    ; Log errors into a log file (server-specific log, stderr, or error_log (below))
    ; As stated above, you're strongly advised to use error logging in place of
    ; error displaying on production web sites.
    log_errors = On
    ; Set maximum length of log_errors. In error_log information about the source is
    ; added. The default is 1024 and 0 allows to not apply any maximum length at all.
    log_errors_max_len = 1024
    ; Do not log repeated messages. Repeated errors must occur in same file on same
    ; line unless ignore_repeated_source is set true.
    ignore_repeated_errors = Off
    ; Ignore source of message when ignoring repeated messages. When this setting
    ; is On you will not log errors with repeated messages from different files or
    ; source lines.
    ignore_repeated_source = Off
    ; If this parameter is set to Off, then memory leaks will not be shown (on
    ; stdout or in the log). This has only effect in a debug compile, and if
    ; error reporting includes E_WARNING in the allowed list
    report_memleaks = Off
    ;report_zend_debug = 0
    ; Store the last error/warning message in $php_errormsg (boolean).
    track_errors = Off
    ; Turn off normal error reporting and emit XML-RPC error XML
    ;xmlrpc_errors = 0
    ; An XML-RPC faultCode
    ;xmlrpc_error_number = 0
    ; Disable the inclusion of HTML tags in error messages.
    ; Note: Never use this feature for production boxes.
    ;html_errors = Off
    ; If html_errors is set On PHP produces clickable error messages that direct
    ; to a page describing the error or function causing the error in detail.
    ; You can download a copy of the PHP manual from http://www.php.net/docs.php
    ; and change docref_root to the base URL of your local copy including the
    ; leading '/'. You must also specify the file extension being used including
    ; the dot.
    ; Note: Never use this feature for production boxes.
    ;docref_root = "/phpmanual/"
    ;docref_ext = .html
    ; String to output before an error message.
    ;error_prepend_string = "<font color=#ff0000>"
    ; String to output after an error message.
    ;error_append_string = "</font>"
    ; Log errors to specified file.
    ;error_log = filename
    ; Log errors to syslog.
    error_log = syslog
    ; Data Handling ;
    ; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
    ; The separator used in PHP generated URLs to separate arguments.
    ; Default is "&".
    ;arg_separator.output = "&"
    ; List of separator(s) used by PHP to parse input URLs into variables.
    ; Default is "&".
    ; NOTE: Every character in this directive is considered as separator!
    ;arg_separator.input = ";&"
    ; This directive describes the order in which PHP registers GET, POST, Cookie,
    ; Environment and Built-in variables (G, P, C, E & S respectively, often
    ; referred to as EGPCS or GPC). Registration is done from left to right, newer
    ; values override older values.
    variables_order = "GPCS"
    ; Whether or not to register the EGPCS variables as global variables. You may
    ; want to turn this off if you don't want to clutter your scripts' global scope
    ; with user data. This makes most sense when coupled with track_vars - in which
    ; case you can access all of the GPC variables through the $HTTP_*_VARS[],
    ; variables.
    ; You should do your best to write your scripts so that they do not require
    ; register_globals to be on; Using form variables as globals can easily lead
    ; to possible security problems, if the code is not very well thought of.
    register_globals = Off
    ; Whether or not to register the old-style input arrays, HTTP_GET_VARS
    ; and friends. If you're not using them, it's recommended to turn them off,
    ; for performance reasons.
    register_long_arrays = Off
    ; This directive tells PHP whether to declare the argv&argc variables (that
    ; would contain the GET information). If you don't use these variables, you
    ; should turn it off for increased performance.
    register_argc_argv = Off
    ; When enabled, the SERVER and ENV variables are created when they're first
    ; used (Just In Time) instead of when the script starts. If these variables
    ; are not used within a script, having this directive on will result in a
    ; performance gain. The PHP directives register_globals, register_long_arrays,
    ; and register_argc_argv must be disabled for this directive to have any affect.
    auto_globals_jit = On
    ; Maximum size of POST data that PHP will accept.
    post_max_size = 8M
    ; Magic quotes
    ; Magic quotes for incoming GET/POST/Cookie data.
    magic_quotes_gpc = Off
    ; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
    magic_quotes_runtime = Off
    ; Use Sybase-style magic quotes (escape ' with '' instead of \').
    magic_quotes_sybase = Off
    ; Automatically add files before or after any PHP document.
    auto_prepend_file =
    auto_append_file =
    ; As of 4.0b4, PHP always outputs a character encoding by default in
    ; the Content-type: header. To disable sending of the charset, simply
    ; set it to be empty.
    ; PHP's built-in default is text/html
    default_mimetype = "text/html"
    default_charset = "utf-8"
    ; Always populate the $HTTP_RAW_POST_DATA variable.
    ;always_populate_raw_post_data = On
    ; Paths and Directories ;
    ; UNIX: "/path1:/path2"
    include_path = ".:/usr/share/pear"
    ; The root of the PHP pages, used only if nonempty.
    ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
    ; if you are running php as a CGI under any web server (other than IIS)
    ; see documentation for security issues. The alternate is to use the
    ; cgi.force_redirect configuration below
    doc_root =
    ; The directory under which PHP opens the script using /~username used only
    ; if nonempty.
    user_dir =
    ; Directory in which the loadable extensions (modules) reside.
    extension_dir = "/usr/lib/php/20060613/"
    ; Whether or not to enable the dl() function. The dl() function does NOT work
    ; properly in multithreaded servers, such as IIS or Zeus, and is automatically
    ; disabled on them.
    enable_dl = Off
    ; cgi.force_redirect is necessary to provide security running PHP as a CGI under
    ; most web servers. Left undefined, PHP turns this on by default. You can
    ; turn it off here AT YOUR OWN RISK
    ; **You CAN safely turn this off for IIS, in fact, you MUST.**
    ; cgi.force_redirect = 1
    ; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
    ; every request.
    ; cgi.nph = 1
    ; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
    ; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
    ; will look for to know it is OK to continue execution. Setting this variable MAY
    ; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
    ; cgi.redirect_status_env = ;
    ; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
    ; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
    ; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
    ; this to 1 will cause PHP CGI to fix it's paths to conform to the spec. A setting
    ; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
    ; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
    cgi.fix_pathinfo=1
    ; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
    ; security tokens of the calling client. This allows IIS to define the
    ; security context that the request runs under. mod_fastcgi under Apache
    ; does not currently support this feature (03/17/2002)
    ; Set to 1 if running under IIS. Default is zero.
    ; fastcgi.impersonate = 1;
    ; Disable logging through FastCGI connection
    ; fastcgi.logging = 0
    ; cgi.rfc2616_headers configuration option tells PHP what type of headers to
    ; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
    ; is supported by Apache. When this option is set to 1 PHP will send
    ; RFC2616 compliant header.
    ; Default is zero.
    ;cgi.rfc2616_headers = 0
    ; File Uploads ;
    ; Whether to allow HTTP file uploads.
    file_uploads = On
    ; Temporary directory for HTTP uploaded files (will use system default if not
    ; specified).
    ;upload_tmp_dir =
    ; Maximum allowed size for uploaded files.
    upload_max_filesize = 2M
    ; Fopen wrappers ;
    ; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
    allow_url_fopen = Off
    ; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
    allow_url_include = Off
    ; Define the anonymous ftp password (your email address)
    ;from="[email protected]"
    ; Define the User-Agent string
    ; user_agent="PHP"
    ; Default timeout for socket based streams (seconds)
    default_socket_timeout = 60
    ; Dynamic Extensions ;
    ; If you wish to have an extension loaded automatically, use the following
    ; syntax:
    ; extension=modulename.extension
    ; For example, under UNIX:
    ; extension=msql.so
    ; Note that it should be the name of the module only; no directory information
    ; needs to go here. Specify the location of the extension with the
    ; extension_dir directive above.
    ; Module Settings ;
    [Date]
    ; Defines the default timezone used by the date functions
    ;date.timezone =
    ;date.default_latitude = 31.7667
    ;date.default_longitude = 35.2333
    ;date.sunrise_zenith = 90.583333
    ;date.sunset_zenith = 90.583333
    [filter]
    ;filter.default = unsafe_raw
    ;filter.default_flags =
    [iconv]
    ;iconv.input_encoding = ISO-8859-1
    ;iconv.internal_encoding = ISO-8859-1
    ;iconv.output_encoding = ISO-8859-1
    [sqlite]
    sqlite.assoc_case = 1
    [Pcre]
    ;PCRE library backtracking limit.
    ;pcre.backtrack_limit=100000
    ;PCRE library recursion limit.
    ;Please note that if you set this value to a high number you may consume all
    ;the available process stack and eventually crash PHP (due to reaching the
    ;stack size limit imposed by the Operating System).
    ;pcre.recursion_limit=100000
    [Syslog]
    ; Whether or not to define the various syslog variables (e.g. $LOG_PID,
    ; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
    ; runtime, you can define these variables by calling define_syslog_variables().
    define_syslog_variables = Off
    [mail function]
    ; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
    ;sendmail_path =
    ; Force the addition of the specified parameters to be passed as extra parameters
    ; to the sendmail binary. These parameters will always replace the value of
    ; the 5th parameter to mail(), even in safe mode.
    ;mail.force_extra_parameters =
    [SQL]
    sql.safe_mode = Off
    [ODBC]
    ;odbc.default_db = Not yet implemented
    ;odbc.default_user = Not yet implemented
    ;odbc.default_pw = Not yet implemented
    ; Allow or prevent persistent links.
    odbc.allow_persistent = On
    ; Check that a connection is still valid before reuse.
    odbc.check_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    odbc.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    odbc.max_links = -1
    ; Handling of LONG fields. Returns number of bytes to variables. 0 means
    ; passthru.
    odbc.defaultlrl = 4096
    ; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
    ; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
    ; of uodbc.defaultlrl and uodbc.defaultbinmode
    odbc.defaultbinmode = 1
    [MySQL]
    ; Allow or prevent persistent links.
    mysql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    mysql.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    mysql.max_links = -1
    ; Default port number for mysql_connect(). If unset, mysql_connect() will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order).
    mysql.default_port =
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    mysql.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    mysql.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    mysql.default_user =
    ; Default password for mysql_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
    ; and reveal this password! And of course, any users with read access to this
    ; file will be able to reveal the password as well.
    mysql.default_password =
    ; Maximum time (in seconds) for connect timeout. -1 means no limit
    mysql.connect_timeout = 60
    ; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
    ; SQL-Errors will be displayed.
    mysql.trace_mode = Off
    [MySQLi]
    ; Maximum number of links. -1 means no limit.
    mysqli.max_links = -1
    ; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order).
    mysqli.default_port = 3306
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    mysqli.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    mysqli.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    mysqli.default_user =
    ; Default password for mysqli_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
    ; and reveal this password! And of course, any users with read access to this
    ; file will be able to reveal the password as well.
    mysqli.default_pw =
    ; Allow or prevent reconnect
    mysqli.reconnect = Off
    [mSQL]
    ; Allow or prevent persistent links.
    msql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    msql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    msql.max_links = -1
    [OCI8]
    ; enables privileged connections using external credentials (OCI_SYSOPER, OCI_SYSDBA)
    ;oci8.privileged_connect = Off
    ; Connection: The maximum number of persistent OCI8 connections per
    ; process. Using -1 means no limit.
    ;oci8.max_persistent = -1
    ; Connection: The maximum number of seconds a process is allowed to
    ; maintain an idle persistent connection. Using -1 means idle
    ; persistent connections will be maintained forever.
    ;oci8.persistent_timeout = -1
    ; Connection: The number of seconds that must pass before issuing a
    ; ping during oci_pconnect() to check the connection validity. When
    ; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
    ; pings completely.
    ;oci8.ping_interval = 60
    ; Tuning: This option enables statement caching, and specifies how
    ; many statements to cache. Using 0 disables statement caching.
    ;oci8.statement_cache_size = 20
    ; Tuning: Enables statement prefetching and sets the default number of
    ; rows that will be fetched automatically after statement execution.
    ;oci8.default_prefetch = 10
    ; Compatibility. Using On means oci_close() will not close
    ; oci_connect() and oci_new_connect() connections.
    ;oci8.old_oci_close_semantics = Off
    [PostgresSQL]
    ; Allow or prevent persistent links.
    pgsql.allow_persistent = On
    ; Detect broken persistent links always with pg_pconnect().
    ; Auto reset feature requires a little overheads.
    pgsql.auto_reset_persistent = Off
    ; Maximum number of persistent links. -1 means no limit.
    pgsql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    pgsql.max_links = -1
    ; Ignore PostgreSQL backends Notice message or not.
    ; Notice message logging require a little overheads.
    pgsql.ignore_notice = 0
    ; Log PostgreSQL backends Notice message or not.
    ; Unless pgsql.ignore_notice=0, module cannot log notice message.
    pgsql.log_notice = 0
    [Sybase]
    ; Allow or prevent persistent links.
    sybase.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    sybase.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    sybase.max_links = -1
    ;sybase.interface_file = "/usr/sybase/interfaces"
    ; Minimum error severity to display.
    sybase.min_error_severity = 10
    ; Minimum message severity to display.
    sybase.min_message_severity = 10
    ; Compatibility mode with old versions of PHP 3.0.
    ; If on, this will cause PHP to automatically assign types to results according
    ; to their Sybase type, instead of treating them all as strings. This
    ; compatibility mode will probably not stay around forever, so try applying
    ; whatever necessary changes to your code, and turn it off.
    sybase.compatability_mode = Off
    [Sybase-CT]
    ; Allow or prevent persistent links.
    sybct.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    sybct.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    sybct.max_links = -1
    ; Minimum server message severity to display.
    sybct.min_server_severity = 10
    ; Minimum client message severity to display.
    sybct.min_client_severity = 10
    [bcmath]
    ; Number of decimal digits for all bcmath functions.
    bcmath.scale = 0
    [browscap]
    ;browscap = extra/browscap.ini
    [Informix]
    ; Default host for ifx_connect() (doesn't apply in safe mode).
    ifx.default_host =
    ; Default user for ifx_connect() (doesn't apply in safe mode).
    ifx.default_user =
    ; Default password for ifx_connect() (doesn't apply in safe mode).
    ifx.default_password =
    ; Allow or prevent persistent links.
    ifx.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    ifx.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    ifx.max_links = -1
    ; If on, select statements return the contents of a text blob instead of its id.
    ifx.textasvarchar = 0
    ; If on, select statements return the contents of a byte blob instead of its id.
    ifx.byteasvarchar = 0
    ; Trailing blanks are stripped from fixed-length char columns. May help the
    ; life of Informix SE users.
    ifx.charasvarchar = 0
    ; If on, the contents of text and byte blobs are dumped to a file instead of
    ; keeping them in memory.
    ifx.blobinfile = 0
    ; NULL's are returned as empty strings, unless this is set to 1. In that case,
    ; NULL's are returned as string 'NULL'.
    ifx.nullformat = 0
    [Session]
    ; Handler used to store/retrieve data.
    session.save_handler = files
    ; Argument passed to save_handler. In the case of files, this is the path
    ; where data files are stored.
    ; As of PHP 4.0.1, you can define the path as:
    ; session.save_path = "N;/path"
    ; where N is an integer. Instead of storing all the session files in
    ; /path, what this will do is use subdirectories N-levels deep, and
    ; store the session data in those directories. This is useful if you
    ; or your OS have problems with lots of files in one directory, and is
    ; a more efficient layout for servers that handle lots of sessions.
    ; NOTE 1: PHP will not create this directory structure automatically.
    ; You can use the script in the ext/session dir for that purpose.
    ; NOTE 2: See the section on garbage collection below if you choose to
    ; use subdirectories for session storage
    ; The file storage module creates files using mode 600 by default.
    ; You can change that by using
    ; session.save_path = "N;MODE;/path"
    ; where MODE is the octal representation of the mode. Note that this
    ; does not overwrite the process's umask.
    session.save_path = "/tmp"
    ; Whether to use cookies.
    session.use_cookies = 1
    ;session.cookie_secure =
    ; This option enables administrators to make their users invulnerable to
    ; attacks which involve passing session ids in URLs; defaults to 0.
    ; session.use_only_cookies = 1
    ; Name of the session (used as cookie name).
    session.name = PHPSESSID
    ; Initialize session on request startup.
    session.auto_start = 0
    ; Lifetime in seconds of cookie or, if 0, until browser is restarted.
    session.cookie_lifetime = 0
    ; The path for which the cookie is valid.
    session.cookie_path = /
    ; The domain for which the cookie is valid.
    session.cookie_domain =
    ; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
    session.cookie_httponly =
    ; Handler used to serialize data. php is the standard serializer of PHP.
    session.serialize_handler = php
    ; Define the probability that the 'garbage collection' process is started
    ; on every session initialization.
    ; The probability is calculated by using gc_probability/gc_divisor,
    ; e.g. 1/100 means there is a 1% chance that the GC process starts
    ; on each request.
    session.gc_probability = 1
    session.gc_divisor = 1000
    ; After this number of seconds, stored data will be seen as 'garbage' and
    ; cleaned up by the garbage collection process.
    session.gc_maxlifetime = 1440
    ; NOTE: If you are using the subdirectory option for storing session files
    ; (see session.save_path above), then garbage collection does *not*
    ; happen automatically. You will need to do your own garbage
    ; collection through a shell script, cron entry, or some other method.
    ; For example, the following script would is the equivalent of
    ; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
    ; cd /path/to/sessions; find -cmin +24 | xargs rm
    ; PHP 4.2 and less have an undocumented feature/bug that allows you to
    ; to initialize a session variable in the global scope, albeit register_globals
    ; is disabled. PHP 4.3 and later will warn you, if this feature is used.
    ; You can disable the feature and the warning separately. At this time,
    ; the warning is only displayed, if bug_compat_42 is enabled.
    session.bug_compat_42 = 0
    session.bug_compat_warn = 1
    ; Check HTTP Referer to invalidate externally stored URLs containing ids.
    ; HTTP_REFERER has to contain this substring for the session to be
    ; considered as valid.
    session.referer_check =
    ; How many bytes to read from the file.
    session.entropy_length = 0
    ; Specified here to create the session id.
    session.entropy_file =
    ;session.entropy_length = 16
    ;session.entropy_file = /dev/urandom
    ; Set to {nocache,private,public,} to determine HTTP caching aspects
    ; or leave this empty to avoid sending anti-caching headers.
    session.cache_limiter = nocache
    ; Document expires after n minutes.
    session.cache_expire = 180
    ; trans sid support is disabled by default.
    ; Use of trans sid may risk your users security.
    ; Use this option with caution.
    ; - User may send URL contains active session ID
    ; to other person via. email/irc/etc.
    ; - URL that contains active session ID may be stored
    ; in publically accessible computer.
    ; - User may access your site with the same session ID
    ; always using URL stored in browser's history or bookmarks.
    session.use_trans_sid = 0
    ; Select a hash function
    ; 0: MD5 (128 bits)
    ; 1: SHA-1 (160 bits)
    session.hash_function = 0
    ; Define how many bits are stored in each character when converting
    ; the binary hash data to something readable.
    ; 4 bits: 0-9, a-f
    ; 5 bits: 0-9, a-v
    ; 6 bits: 0-9, a-z, A-Z, "-", ","
    session.hash_bits_per_character = 5
    ; The URL rewriter will look for URLs in a defined set of HTML tags.
    ; form/fieldset are special; if you include them here, the rewriter will
    ; add a hidden <input> field with the info which is otherwise appended
    ; to URLs. If you want XHTML conformity, remove the form entry.
    ; Note that all valid entries require a "=", even if no value follows.
    url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
    [MSSQL]
    ; Allow or prevent persistent links.
    mssql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    mssql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    mssql.max_links = -1
    ; Minimum error severity to display.
    mssql.min_error_severity = 10
    ; Minimum message severity to display.
    mssql.min_message_severity = 10
    ; Compatibility mode with old versions of PHP 3.0.
    mssql.compatability_mode = Off
    ; Connect timeout
    ;mssql.connect_timeout = 5
    ; Query timeout
    ;mssql.timeout = 60
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textlimit = 4096
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textsize = 4096
    ; Limits the number of records in each batch. 0 = all records in one batch.
    ;mssql.batchsize = 0
    ; Specify how datetime and datetim4 columns are returned
    ; On => Returns data converted to SQL server settings
    ; Off => Returns values as YYYY-MM-DD hh:mm:ss
    ;mssql.datetimeconvert = On
    ; Use NT authentication when connecting to the server
    mssql.secure_connection = Off
    ; Specify max number of processes. -1 = library default
    ; msdlib defaults to 25
    ; FreeTDS defaults to 4096
    ;mssql.max_procs = -1
    ; Specify client character set.
    ; If empty or not set the client charset from freetds.comf is used
    ; This is only used when compiled with FreeTDS
    ;mssql.charset = "ISO-8859-1"
    [Assertion]
    ; Assert(expr); active by default.
    ;assert.active = On
    ; Issue a PHP warning for each failed assertion.
    ;assert.warning = On
    ; Don't bail out by default.
    ;assert.bail = Off
    ; User-function to be called if an assertion fails.
    ;assert.callback = 0
    ; Eval the expression with current error_reporting(). Set to true if you want
    ; error_reporting(0) around the eval().
    ;assert.quiet_eval = 0
    [COM]
    ; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
    ;com.typelib_file =
    ; allow Distributed-COM calls
    ;com.allow_dcom = true
    ; autoregister constants of a components typlib on com_load()
    ;com.autoregister_typelib = true
    ; register constants casesensitive
    ;com.autoregister_casesensitive = false
    ; show warnings on duplicate constant registrations
    ;com.autoregister_verbose = true
    [mbstring]
    ; language for internal character representation.
    ;mbstring.language = Japanese
    ; internal/script encoding.
    ; Some encoding cannot work as internal encoding.
    ; (e.g. SJIS, BIG5, ISO-2022-*)
    ;mbstring.internal_encoding = EUC-JP
    ; http input encoding.
    ;mbstring.http_input = auto
    ; http output encoding. mb_output_handler must be
    ; registered as output buffer to function
    ;mbstring.http_output = SJIS
    ; enable automatic encoding translation according to
    ; mbstring.internal_encoding setting. Input chars are
    ; converted to internal encoding by setting this to On.
    ; Note: Do _not_ use automatic encoding translation for
    ; portable libs/applications.
    ;mbstring.encoding_translation = Off
    ; automatic encoding detection order.
    ; auto means
    ;mbstring.detect_order = auto
    ; substitute_character used when character cannot be converted
    ; one from another
    ;mbstring.substitute_character = none;
    ; overload(replace) single byte functions by mbstring functions.
    ; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
    ; etc. Possible values are 0,1,2,4 or combination of them.
    ; For example, 7 for overload everything.
    ; 0: No overload
    ; 1: Overload mail() function
    ; 2: Overload str*() functions
    ; 4: Overload ereg*() functions
    ;mbstring.func_overload = 0
    ; enable strict encoding detection.
    ;mbstring.strict_encoding = Off
    [FrontBase]
    ;fbsql.allow_persistent = On
    ;fbsql.autocommit = On
    ;fbsql.show_timestamp_decimals = Off
    ;fbsql.default_database =
    ;fbsql.default_database_password =
    ;fbsql.default_host =
    ;fbsql.default_password =
    ;fbsql.default_user = "_SYSTEM"
    ;fbsql.generate_warnings = Off
    ;fbsql.max_connections = 128
    ;fbsql.max_links = 128
    ;fbsql.max_persistent = -1
    ;fbsql.max_results = 128
    [gd]
    ; Tell the jpeg decode to libjpeg warnings and try to create
    ; a gd image. The warning will then be displayed as notices
    ; disabled by default
    ;gd.jpeg_ignore_warning = 0
    [exif]
    ; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
    ; With mbstring support this will automatically be converted into the encoding
    ; given by corresponding encode setting. When empty mbstring.internal_encoding
    ; is used. For the decode settings you can distinguish between motorola and
    ; intel byte order. A decode setting cannot be empty.
    ;exif.encode_unicode = ISO-8859-15
    ;exif.decode_unicode_motorola = UCS-2BE
    ;exif.decode_unicode_intel = UCS-2LE
    ;exif.encode_jis =
    ;exif.decode_jis_motorola = JIS
    ;exif.decode_jis_intel = JIS
    [Tidy]
    ; The path to a default tidy configuration file to use when using tidy
    ;tidy.default_config = /usr/local/lib/php/default.tcfg
    ; Should tidy clean and repair output automatically?
    ; WARNING: Do not use this option if you are generating non-html content
    ; such as dynamic images
    tidy.clean_output = Off
    [soap]
    ; Enables or disables WSDL caching feature.
    soap.wsdl_cache_enabled=1
    ; Sets the directory name where SOAP extension will put cache files.
    soap.wsdl_cache_dir="/tmp"
    ; (time to live) Sets the number of second while cached file will be used
    ; instead of original one.
    soap.wsdl_cache_ttl=86400
    ; available extensions
    ;extension=bcmath.so
    ;extension=bz2.so
    ;extension=calendar.so
    ;extension=curl.so
    ;extension=dba.so
    ;extension=dbase.so
    ;extension=exif.so
    ;extension=ftp.so
    ;extension=gd.so
    extension=gettext.so
    ;extension=gmp.so
    ;extension=iconv.so
    ;extension=imap.so
    ;extension=json.so
    ;extension=ldap.so
    ;extension=mcrypt.so
    ;extension=mhash.so
    ;extension=mime_magic.so
    ;extension=mysql.so
    ;extension=mysqli.so
    ;extension=ncurses.so
    ;extension=odbc.so
    ;extension=openssl.so
    ;extension=pdo.so
    ;extension=pdo_mysql.so
    ;extension=pdo_odbc.so
    ;extension=pdo_pgsql.so
    ;extension=pdo_sqlite.so
    ;extension=pgsql.so
    ;extension=posix.so
    ;extension=pspell.so
    extension=session.so
    ;extension=shmop.so
    ;extension=snmp.so
    ;extension=soap.so
    extension=sockets.so
    extension=sqlite.so
    ;extension=sysvmsg.so
    ;extension=sysvsem.so
    ;extension=sysvshm.so
    ;extension=tidy.so
    ;extension=xmlrpc.so
    ;extension=xsl.so
    ;extension=zip.so
    extension=zlib.so
    ; Local Variables:
    ; tab-width: 4
    ; End:
    I've attempted enabling pdo.so and pdo_sqlite.so as well, with no results, making sure to stop lighty and flush all of its processes before checking again.
    `php-cgi -m | grep sqlite` does not return anything, either.
    The extensions directory (/usr/lib/php/20060613) exists on my system and contains sqlite.so, as expected.
    I have no clue what's going on here and would greatly appreciate any help offered.
    Last edited by xelados (2009-09-23 04:02:22)

    After the last update which installed PHP 5.3.0, I'm having a similar problem. PHP fails to recognize any extensions which I've defined in php.ini. PHP itself works just fine, so I'm sure this problem is related to the update of PHP.
    Here's my php.ini:
    [PHP]
    ; About php.ini ;
    ; This file controls many aspects of PHP's behavior. In order for PHP to
    ; read it, it must be named 'php.ini'. PHP looks for it in the current
    ; working directory, in the path designated by the environment variable
    ; PHPRC, and in the path that was defined in compile time (in that order).
    ; The path in which the php.ini file is looked for can be overridden using
    ; the -c argument in command line mode.
    ; The syntax of the file is extremely simple. Whitespace and Lines
    ; beginning with a semicolon are silently ignored (as you probably guessed).
    ; Section headers (e.g. [Foo]) are also silently ignored, even though
    ; they might mean something in the future.
    ; Directives are specified using the following syntax:
    ; directive = value
    ; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
    ; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
    ; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
    ; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
    ; Expressions in the INI file are limited to bitwise operators and parentheses:
    ; | bitwise OR
    ; & bitwise AND
    ; ~ bitwise NOT
    ; ! boolean NOT
    ; Boolean flags can be turned on using the values 1, On, True or Yes.
    ; They can be turned off using the values 0, Off, False or No.
    ; An empty string can be denoted by simply not writing anything after the equal
    ; sign, or by using the None keyword:
    ; foo = ; sets foo to an empty string
    ; foo = none ; sets foo to an empty string
    ; foo = "none" ; sets foo to the string 'none'
    ; If you use constants in your value, and these constants belong to a
    ; dynamically loaded extension (either a PHP extension or a Zend extension),
    ; you may only use these constants *after* the line that loads the extension.
    ; About this file ;
    ; This is the recommended, PHP 5-style version of the php.ini-dist file. It
    ; sets some non standard settings, that make PHP more efficient, more secure,
    ; and encourage cleaner coding.
    ; The price is that with these settings, PHP may be incompatible with some
    ; applications, and sometimes, more difficult to develop with. Using this
    ; file is warmly recommended for production sites. As all of the changes from
    ; the standard settings are thoroughly documented, you can go over each one,
    ; and decide whether you want to use it or not.
    ; For general information about the php.ini file, please consult the php.ini-dist
    ; file, included in your PHP distribution.
    ; This file is different from the php.ini-dist file in the fact that it features
    ; different values for several directives, in order to improve performance, while
    ; possibly breaking compatibility with the standard out-of-the-box behavior of
    ; PHP. Please make sure you read what's different, and modify your scripts
    ; accordingly, if you decide to use this file instead.
    ; - register_long_arrays = Off [Performance]
    ; Disables registration of the older (and deprecated) long predefined array
    ; variables ($HTTP_*_VARS). Instead, use the superglobals that were
    ; introduced in PHP 4.1.0
    ; - display_errors = Off [Security]
    ; With this directive set to off, errors that occur during the execution of
    ; scripts will no longer be displayed as a part of the script output, and thus,
    ; will no longer be exposed to remote users. With some errors, the error message
    ; content may expose information about your script, web server, or database
    ; server that may be exploitable for hacking. Production sites should have this
    ; directive set to off.
    ; - log_errors = On [Security]
    ; This directive complements the above one. Any errors that occur during the
    ; execution of your script will be logged (typically, to your server's error log,
    ; but can be configured in several ways). Along with setting display_errors to off,
    ; this setup gives you the ability to fully understand what may have gone wrong,
    ; without exposing any sensitive information to remote users.
    ; - output_buffering = 4096 [Performance]
    ; Set a 4KB output buffer. Enabling output buffering typically results in less
    ; writes, and sometimes less packets sent on the wire, which can often lead to
    ; better performance. The gain this directive actually yields greatly depends
    ; on which Web server you're working with, and what kind of scripts you're using.
    ; - register_argc_argv = Off [Performance]
    ; Disables registration of the somewhat redundant $argv and $argc global
    ; variables.
    ; - magic_quotes_gpc = Off [Performance]
    ; Input data is no longer escaped with slashes so that it can be sent into
    ; SQL databases without further manipulation. Instead, you should use the
    ; function addslashes() on each input element you wish to send to a database.
    ; - variables_order = "GPCS" [Performance]
    ; The environment variables are not hashed into the $_ENV. To access
    ; environment variables, you can use getenv() instead.
    ; - error_reporting = E_ALL [Code Cleanliness, Security(?)]
    ; By default, PHP suppresses errors of type E_NOTICE. These error messages
    ; are emitted for non-critical errors, but that could be a symptom of a bigger
    ; problem. Most notably, this will cause error messages about the use
    ; of uninitialized variables to be displayed.
    ; - allow_call_time_pass_reference = Off [Code cleanliness]
    ; It's not possible to decide to force a variable to be passed by reference
    ; when calling a function. The PHP 4 style to do this is by making the
    ; function require the relevant argument by reference.
    ; - short_open_tag = Off [Portability]
    ; Using short tags is discouraged when developing code meant for redistribution
    ; since short tags may not be supported on the target server.
    ; Language Options ;
    ; Enable the PHP scripting language engine under Apache.
    engine = On
    ; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
    zend.ze1_compatibility_mode = Off
    ; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized.
    ; NOTE: Using short tags should be avoided when developing applications or
    ; libraries that are meant for redistribution, or deployment on PHP
    ; servers which are not under your control, because short tags may not
    ; be supported on the target server. For portable, redistributable code,
    ; be sure not to use short tags.
    short_open_tag = Off
    ; Allow ASP-style <% %> tags.
    asp_tags = Off
    ; The number of significant digits displayed in floating point numbers.
    precision = 14
    ; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
    y2k_compliance = On
    ; Output buffering allows you to send header lines (including cookies) even
    ; after you send body content, at the price of slowing PHP's output layer a
    ; bit. You can enable output buffering during runtime by calling the output
    ; buffering functions. You can also enable output buffering for all files by
    ; setting this directive to On. If you wish to limit the size of the buffer
    ; to a certain size - you can use a maximum number of bytes instead of 'On', as
    ; a value for this directive (e.g., output_buffering=4096).
    output_buffering = Off
    ; You can redirect all of the output of your scripts to a function. For
    ; example, if you set output_handler to "mb_output_handler", character
    ; encoding will be transparently converted to the specified encoding.
    ; Setting any output handler automatically turns on output buffering.
    ; Note: People who wrote portable scripts should not depend on this ini
    ; directive. Instead, explicitly set the output handler using ob_start().
    ; Using this ini directive may cause problems unless you know what script
    ; is doing.
    ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
    ; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
    ; Note: output_handler must be empty if this is set 'On' !!!!
    ; Instead you must use zlib.output_handler.
    ;output_handler =
    ; Transparent output compression using the zlib library
    ; Valid values for this option are 'off', 'on', or a specific buffer size
    ; to be used for compression (default is 4KB)
    ; Note: Resulting chunk size may vary due to nature of compression. PHP
    ; outputs chunks that are few hundreds bytes each as a result of
    ; compression. If you prefer a larger chunk size for better
    ; performance, enable output_buffering in addition.
    ; Note: You need to use zlib.output_handler instead of the standard
    ; output_handler, or otherwise the output will be corrupted.
    zlib.output_compression = Off
    ;zlib.output_compression_level = -1
    ; You cannot specify additional output handlers if zlib.output_compression
    ; is activated here. This setting does the same as output_handler but in
    ; a different order.
    ;zlib.output_handler =
    ; Implicit flush tells PHP to tell the output layer to flush itself
    ; automatically after every output block. This is equivalent to calling the
    ; PHP function flush() after each and every call to print() or echo() and each
    ; and every HTML block. Turning this option on has serious performance
    ; implications and is generally recommended for debugging purposes only.
    implicit_flush = Off
    ; The unserialize callback function will be called (with the undefined class'
    ; name as parameter), if the unserializer finds an undefined class
    ; which should be instantiated.
    ; A warning appears if the specified function is not defined, or if the
    ; function doesn't include/implement the missing class.
    ; So only set this entry, if you really want to implement such a
    ; callback-function.
    unserialize_callback_func=
    ; When floats & doubles are serialized store serialize_precision significant
    ; digits after the floating point. The default value ensures that when floats
    ; are decoded with unserialize, the data will remain the same.
    serialize_precision = 100
    ; Whether to enable the ability to force arguments to be passed by reference
    ; at function call time. This method is deprecated and is likely to be
    ; unsupported in future versions of PHP/Zend. The encouraged method of
    ; specifying which arguments should be passed by reference is in the function
    ; declaration. You're encouraged to try and turn this option Off and make
    ; sure your scripts work properly with it in order to ensure they will work
    ; with future versions of the language (you will receive a warning each time
    ; you use this feature, and the argument will be passed by value instead of by
    ; reference).
    allow_call_time_pass_reference = Off
    ; Safe Mode
    safe_mode = Off
    ; By default, Safe Mode does a UID compare check when
    ; opening files. If you want to relax this to a GID compare,
    ; then turn on safe_mode_gid.
    safe_mode_gid = Off
    ; When safe_mode is on, UID/GID checks are bypassed when
    ; including files from this directory and its subdirectories.
    ; (directory must also be in include_path or full path must
    ; be used when including)
    safe_mode_include_dir =
    ; When safe_mode is on, only executables located in the safe_mode_exec_dir
    ; will be allowed to be executed via the exec family of functions.
    safe_mode_exec_dir =
    ; Setting certain environment variables may be a potential security breach.
    ; This directive contains a comma-delimited list of prefixes. In Safe Mode,
    ; the user may only alter environment variables whose names begin with the
    ; prefixes supplied here. By default, users will only be able to set
    ; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
    ; Note: If this directive is empty, PHP will let the user modify ANY
    ; environment variable!
    safe_mode_allowed_env_vars = PHP_
    ; This directive contains a comma-delimited list of environment variables that
    ; the end user won't be able to change using putenv(). These variables will be
    ; protected even if safe_mode_allowed_env_vars is set to allow to change them.
    safe_mode_protected_env_vars = LD_LIBRARY_PATH
    ; open_basedir, if set, limits all file operations to the defined directory
    ; and below. This directive makes most sense if used in a per-directory
    ; or per-virtualhost web server configuration file. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    ; open_basedir = /srv/http/:/home/:/tmp/:/usr/share/pear/
    ; This directive allows you to disable certain functions for security reasons.
    ; It receives a comma-delimited list of function names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    disable_functions =
    ; This directive allows you to disable certain classes for security reasons.
    ; It receives a comma-delimited list of class names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    disable_classes =
    ; Colors for Syntax Highlighting mode. Anything that's acceptable in
    ; <span style="color: ???????"> would work.
    ;highlight.string = #DD0000
    ;highlight.comment = #FF9900
    ;highlight.keyword = #007700
    ;highlight.bg = #FFFFFF
    ;highlight.default = #0000BB
    ;highlight.html = #000000
    ; If enabled, the request will be allowed to complete even if the user aborts
    ; the request. Consider enabling it if executing long request, which may end up
    ; being interrupted by the user or a browser timing out.
    ; ignore_user_abort = On
    ; Determines the size of the realpath cache to be used by PHP. This value should
    ; be increased on systems where PHP opens many files to reflect the quantity of
    ; the file operations performed.
    ; realpath_cache_size=16k
    ; Duration of time, in seconds for which to cache realpath information for a given
    ; file or directory. For systems with rarely changing files, consider increasing this
    ; value.
    ; realpath_cache_ttl=120
    ; Misc
    ; Decides whether PHP may expose the fact that it is installed on the server
    ; (e.g. by adding its signature to the Web server header). It is no security
    ; threat in any way, but it makes it possible to determine whether you use PHP
    ; on your server or not.
    expose_php = Off
    ; Resource Limits ;
    max_execution_time = 120 ; Maximum execution time of each script, in seconds
    max_input_time = 120 ; Maximum amount of time each script may spend parsing request data
    ;max_input_nesting_level = 64 ; Maximum input variable nesting level
    memory_limit = 128M ; Maximum amount of memory a script may consume (32MB)
    ; Error handling and logging ;
    ; error_reporting is a bit-field. Or each number up to get desired error
    ; reporting level
    ; E_ALL - All errors and warnings (doesn't include E_STRICT)
    ; E_ERROR - fatal run-time errors
    ; E_RECOVERABLE_ERROR - almost fatal run-time errors
    ; E_WARNING - run-time warnings (non-fatal errors)
    ; E_PARSE - compile-time parse errors
    ; E_NOTICE - run-time notices (these are warnings which often result
    ; from a bug in your code, but it's possible that it was
    ; intentional (e.g., using an uninitialized variable and
    ; relying on the fact it's automatically initialized to an
    ; empty string)
    ; E_STRICT - run-time notices, enable to have PHP suggest changes
    ; to your code which will ensure the best interoperability
    ; and forward compatibility of your code
    ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
    ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
    ; initial startup
    ; E_COMPILE_ERROR - fatal compile-time errors
    ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
    ; E_USER_ERROR - user-generated error message
    ; E_USER_WARNING - user-generated warning message
    ; E_USER_NOTICE - user-generated notice message
    ; Examples:
    ; - Show all errors, except for notices and coding standards warnings
    ;error_reporting = E_ALL & ~E_NOTICE
    ; - Show all errors, except for notices
    ;error_reporting = E_ALL & ~E_NOTICE | E_STRICT
    ; - Show only errors
    ;error_reporting = E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR
    ; - Show all errors, except coding standards warnings
    error_reporting = E_ALL
    ; Print out errors (as a part of the output). For production web sites,
    ; you're strongly encouraged to turn this feature off, and use error logging
    ; instead (see below). Keeping display_errors enabled on a production web site
    ; may reveal security information to end users, such as file paths on your Web
    ; server, your database schema or other information.
    ; possible values for display_errors:
    ; Off - Do not display any errors
    ; stderr - Display errors to STDERR (affects only CGI/CLI binaries!)
    ; On or stdout - Display errors to STDOUT (default)
    ; To output errors to STDERR with CGI/CLI:
    ;display_errors = "stderr"
    ; Default
    display_errors = On
    ; Even when display_errors is on, errors that occur during PHP's startup
    ; sequence are not displayed. It's strongly recommended to keep
    ; display_startup_errors off, except for when debugging.
    display_startup_errors = Off
    ; Log errors into a log file (server-specific log, stderr, or error_log (below))
    ; As stated above, you're strongly advised to use error logging in place of
    ; error displaying on production web sites.
    log_errors = Off
    ; Set maximum length of log_errors. In error_log information about the source is
    ; added. The default is 1024 and 0 allows to not apply any maximum length at all.
    log_errors_max_len = 1024
    ; Do not log repeated messages. Repeated errors must occur in same file on same
    ; line until ignore_repeated_source is set true.
    ignore_repeated_errors = Off
    ; Ignore source of message when ignoring repeated messages. When this setting
    ; is On you will not log errors with repeated messages from different files or
    ; source lines.
    ignore_repeated_source = Off
    ; If this parameter is set to Off, then memory leaks will not be shown (on
    ; stdout or in the log). This has only effect in a debug compile, and if
    ; error reporting includes E_WARNING in the allowed list
    report_memleaks = Off
    ;report_zend_debug = 0
    ; Store the last error/warning message in $php_errormsg (boolean).
    track_errors = Off
    ; Disable the inclusion of HTML tags in error messages.
    ; Note: Never use this feature for production boxes.
    ;html_errors = Off
    ; If html_errors is set On PHP produces clickable error messages that direct
    ; to a page describing the error or function causing the error in detail.
    ; You can download a copy of the PHP manual from http://www.php.net/docs.php
    ; and change docref_root to the base URL of your local copy including the
    ; leading '/'. You must also specify the file extension being used including
    ; the dot.
    ; Note: Never use this feature for production boxes.
    ;docref_root = "/phpmanual/"
    ;docref_ext = .html
    ; String to output before an error message.
    ;error_prepend_string = "<font color=ff0000>"
    ; String to output after an error message.
    ;error_append_string = "</font>"
    ; Log errors to specified file.
    ;error_log = filename
    ; Log errors to syslog.
    error_log = syslog
    ; Data Handling ;
    ; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
    ; The separator used in PHP generated URLs to separate arguments.
    ; Default is "&".
    ;arg_separator.output = "&"
    ; List of separator(s) used by PHP to parse input URLs into variables.
    ; Default is "&".
    ; NOTE: Every character in this directive is considered as separator!
    ;arg_separator.input = ";&"
    ; This directive describes the order in which PHP registers GET, POST, Cookie,
    ; Environment and Built-in variables (G, P, C, E & S respectively, often
    ; referred to as EGPCS or GPC). Registration is done from left to right, newer
    ; values override older values.
    variables_order = "GPCS"
    ; Whether or not to register the EGPCS variables as global variables. You may
    ; want to turn this off if you don't want to clutter your scripts' global scope
    ; with user data. This makes most sense when coupled with track_vars - in which
    ; case you can access all of the GPC variables through the $HTTP_*_VARS[],
    ; variables.
    ; You should do your best to write your scripts so that they do not require
    ; register_globals to be on; Using form variables as globals can easily lead
    ; to possible security problems, if the code is not very well thought of.
    register_globals = Off
    ; Whether or not to register the old-style input arrays, HTTP_GET_VARS
    ; and friends. If you're not using them, it's recommended to turn them off,
    ; for performance reasons.
    register_long_arrays = Off
    ; This directive tells PHP whether to declare the argv&argc variables (that
    ; would contain the GET information). If you don't use these variables, you
    ; should turn it off for increased performance.
    register_argc_argv = Off
    ; When enabled, the SERVER and ENV variables are created when they're first
    ; used (Just In Time) instead of when the script starts. If these variables
    ; are not used within a script, having this directive on will result in a
    ; performance gain. The PHP directives register_globals, register_long_arrays,
    ; and register_argc_argv must be disabled for this directive to have any affect.
    auto_globals_jit = On
    ; Maximum size of POST data that PHP will accept.
    post_max_size = 128M
    ; Magic quotes
    ; Magic quotes for incoming GET/POST/Cookie data.
    magic_quotes_gpc = Off
    ; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
    magic_quotes_runtime = Off
    ; Use Sybase-style magic quotes (escape ' with '' instead of \').
    magic_quotes_sybase = Off
    ; Automatically add files before or after any PHP document.
    auto_prepend_file =
    auto_append_file =
    ; As of 4.0b4, PHP always outputs a character encoding by default in
    ; the Content-type: header. To disable sending of the charset, simply
    ; set it to be empty.
    ; PHP's built-in default is text/html
    default_mimetype = "text/html"
    ;default_charset = "iso-8859-1"
    ; Always populate the $HTTP_RAW_POST_DATA variable.
    ;always_populate_raw_post_data = On
    ; Paths and Directories ;
    ; UNIX: "/path1:/path2"
    ;include_path = ".:/usr/share/pear"
    ; The root of the PHP pages, used only if nonempty.
    ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
    ; if you are running php as a CGI under any web server (other than IIS)
    ; see documentation for security issues. The alternate is to use the
    ; cgi.force_redirect configuration below
    doc_root =
    ; The directory under which PHP opens the script using /~username used only
    ; if nonempty.
    user_dir =
    ; Directory in which the loadable extensions (modules) reside.
    extension_dir = "/usr/lib/php/modules/"
    ; Whether or not to enable the dl() function. The dl() function does NOT work
    ; properly in multithreaded servers, such as IIS or Zeus, and is automatically
    ; disabled on them.
    enable_dl = Off
    ; cgi.force_redirect is necessary to provide security running PHP as a CGI under
    ; most web servers. Left undefined, PHP turns this on by default. You can
    ; turn it off here AT YOUR OWN RISK
    ; **You CAN safely turn this off for IIS, in fact, you MUST.**
    ; cgi.force_redirect = 1
    ; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
    ; every request.
    ; cgi.nph = 1
    ; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
    ; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
    ; will look for to know it is OK to continue execution. Setting this variable MAY
    ; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
    ; cgi.redirect_status_env = ;
    ; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
    ; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
    ; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
    ; this to 1 will cause PHP CGI to fix it's paths to conform to the spec. A setting
    ; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
    ; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
    ; cgi.fix_pathinfo=1
    ; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
    ; security tokens of the calling client. This allows IIS to define the
    ; security context that the request runs under. mod_fastcgi under Apache
    ; does not currently support this feature (03/17/2002)
    ; Set to 1 if running under IIS. Default is zero.
    ; fastcgi.impersonate = 1;
    ; Disable logging through FastCGI connection
    ; fastcgi.logging = 0
    ; cgi.rfc2616_headers configuration option tells PHP what type of headers to
    ; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
    ; is supported by Apache. When this option is set to 1 PHP will send
    ; RFC2616 compliant header.
    ; Default is zero.
    ;cgi.rfc2616_headers = 0
    ; File Uploads ;
    ; Whether to allow HTTP file uploads.
    file_uploads = On
    ; Temporary directory for HTTP uploaded files (will use system default if not
    ; specified).
    ;upload_tmp_dir =
    ; Maximum allowed size for uploaded files.
    upload_max_filesize = 128M
    ; Fopen wrappers ;
    ; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
    allow_url_fopen = On
    ; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
    allow_url_include = Off
    ; Define the anonymous ftp password (your email address)
    ;from="[email protected]"
    ; Define the User-Agent string
    ; user_agent="PHP"
    ; Default timeout for socket based streams (seconds)
    default_socket_timeout = 10
    ; Dynamic Extensions ;
    ; If you wish to have an extension loaded automatically, use the following
    ; syntax:
    ; extension=modulename.extension
    ; For example, under UNIX:
    ; extension=msql.so
    ; Note that it should be the name of the module only; no directory information
    ; needs to go here. Specify the location of the extension with the
    ; extension_dir directive above.
    ; Module Settings ;
    [Date]
    ; Defines the default timezone used by the date functions
    ;date.timezone =
    ;date.default_latitude = 31.7667
    ;date.default_longitude = 35.2333
    ;date.sunrise_zenith = 90.583333
    ;date.sunset_zenith = 90.583333
    [filter]
    ;filter.default = unsafe_raw
    ;filter.default_flags =
    [iconv]
    ;iconv.input_encoding = ISO-8859-1
    ;iconv.internal_encoding = ISO-8859-1
    ;iconv.output_encoding = ISO-8859-1
    [sqlite]
    ;sqlite.assoc_case = 0
    [xmlrpc]
    ;xmlrpc_error_number = 0
    ;xmlrpc_errors = 0
    [Pcre]
    ;PCRE library backtracking limit.
    ;pcre.backtrack_limit=100000
    ;PCRE library recursion limit.
    ;Please note that if you set this value to a high number you may consume all
    ;the available process stack and eventually crash PHP (due to reaching the
    ;stack size limit imposed by the Operating System).
    ;pcre.recursion_limit=100000
    [Syslog]
    ; Whether or not to define the various syslog variables (e.g. $LOG_PID,
    ; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
    ; runtime, you can define these variables by calling define_syslog_variables().
    define_syslog_variables = Off
    [mail function]
    ; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
    ;sendmail_path =
    ; Force the addition of the specified parameters to be passed as extra parameters
    ; to the sendmail binary. These parameters will always replace the value of
    ; the 5th parameter to mail(), even in safe mode.
    ;mail.force_extra_parameters =
    [SQL]
    sql.safe_mode = Off
    [ODBC]
    ;odbc.default_db = Not yet implemented
    ;odbc.default_user = Not yet implemented
    ;odbc.default_pw = Not yet implemented
    ; Allow or prevent persistent links.
    odbc.allow_persistent = On
    ; Check that a connection is still valid before reuse.
    odbc.check_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    odbc.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    odbc.max_links = -1
    ; Handling of LONG fields. Returns number of bytes to variables. 0 means
    ; passthru.
    odbc.defaultlrl = 4096
    ; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
    ; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
    ; of uodbc.defaultlrl and uodbc.defaultbinmode
    odbc.defaultbinmode = 1
    [MySQL]
    ; Allow or prevent persistent links.
    mysql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    mysql.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    mysql.max_links = -1
    ; Default port number for mysql_connect(). If unset, mysql_connect() will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order).
    mysql.default_port =
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    mysql.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    mysql.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    mysql.default_user =
    ; Default password for mysql_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
    ; and reveal this password! And of course, any users with read access to this
    ; file will be able to reveal the password as well.
    mysql.default_password =
    ; Maximum time (in seconds) for connect timeout. -1 means no limit
    mysql.connect_timeout = 60
    ; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
    ; SQL-Errors will be displayed.
    mysql.trace_mode = Off
    [MySQLi]
    ; Maximum number of links. -1 means no limit.
    mysqli.max_links = -1
    ; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order).
    mysqli.default_port = 3306
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    mysqli.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    mysqli.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    mysqli.default_user =
    ; Default password for mysqli_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
    ; and reveal this password! And of course, any users with read access to this
    ; file will be able to reveal the password as well.
    mysqli.default_pw =
    ; Allow or prevent reconnect
    mysqli.reconnect = Off
    [mSQL]
    ; Allow or prevent persistent links.
    msql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    msql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    msql.max_links = -1
    [OCI8]
    ; enables privileged connections using external credentials (OCI_SYSOPER, OCI_SYSDBA)
    ;oci8.privileged_connect = Off
    ; Connection: The maximum number of persistent OCI8 connections per
    ; process. Using -1 means no limit.
    ;oci8.max_persistent = -1
    ; Connection: The maximum number of seconds a process is allowed to
    ; maintain an idle persistent connection. Using -1 means idle
    ; persistent connections will be maintained forever.
    ;oci8.persistent_timeout = -1
    ; Connection: The number of seconds that must pass before issuing a
    ; ping during oci_pconnect() to check the connection validity. When
    ; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
    ; pings completely.
    ;oci8.ping_interval = 60
    ; Tuning: This option enables statement caching, and specifies how
    ; many statements to cache. Using 0 disables statement caching.
    ;oci8.statement_cache_size = 20
    ; Tuning: Enables statement prefetching and sets the default number of
    ; rows that will be fetched automatically after statement execution.
    ;oci8.default_prefetch = 10
    ; Compatibility. Using On means oci_close() will not close
    ; oci_connect() and oci_new_connect() connections.
    ;oci8.old_oci_close_semantics = Off
    [PostgresSQL]
    ; Allow or prevent persistent links.
    pgsql.allow_persistent = On
    ; Detect broken persistent links always with pg_pconnect().
    ; Auto reset feature requires a little overheads.
    pgsql.auto_reset_persistent = Off
    ; Maximum number of persistent links. -1 means no limit.
    pgsql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    pgsql.max_links = -1
    ; Ignore PostgreSQL backends Notice message or not.
    ; Notice message logging require a little overheads.
    pgsql.ignore_notice = 0
    ; Log PostgreSQL backends Noitce message or not.
    ; Unless pgsql.ignore_notice=0, module cannot log notice message.
    pgsql.log_notice = 0
    [Sybase]
    ; Allow or prevent persistent links.
    sybase.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    sybase.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    sybase.max_links = -1
    ;sybase.interface_file = "/usr/sybase/interfaces"
    ; Minimum error severity to display.
    sybase.min_error_severity = 10
    ; Minimum message severity to display.
    sybase.min_message_severity = 10
    ; Compatibility mode with old versions of PHP 3.0.
    ; If on, this will cause PHP to automatically assign types to results according
    ; to their Sybase type, instead of treating them all as strings. This
    ; compatibility mode will probably not stay around forever, so try applying
    ; whatever necessary changes to your code, and turn it off.
    sybase.compatability_mode = Off
    [Sybase-CT]
    ; Allow or prevent persistent links.
    sybct.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    sybct.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    sybct.max_links = -1
    ; Minimum server message severity to display.
    sybct.min_server_severity = 10
    ; Minimum client message severity to display.
    sybct.min_client_severity = 10
    [bcmath]
    ; Number of decimal digits for all bcmath functions.
    bcmath.scale = 0
    [browscap]
    ;browscap = extra/browscap.ini
    [Informix]
    ; Default host for ifx_connect() (doesn't apply in safe mode).
    ifx.default_host =
    ; Default user for ifx_connect() (doesn't apply in safe mode).
    ifx.default_user =
    ; Default password for ifx_connect() (doesn't apply in safe mode).
    ifx.default_password =
    ; Allow or prevent persistent links.
    ifx.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    ifx.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    ifx.max_links = -1
    ; If on, select statements return the contents of a text blob instead of its id.
    ifx.textasvarchar = 0
    ; If on, select statements return the contents of a byte blob instead of its id.
    ifx.byteasvarchar = 0
    ; Trailing blanks are stripped from fixed-length char columns. May help the
    ; life of Informix SE users.
    ifx.charasvarchar = 0
    ; If on, the contents of text and byte blobs are dumped to a file instead of
    ; keeping them in memory.
    ifx.blobinfile = 0
    ; NULL's are returned as empty strings, unless this is set to 1. In that case,
    ; NULL's are returned as string 'NULL'.
    ifx.nullformat = 0
    [Session]
    ; Handler used to store/retrieve data.
    session.save_handler = files
    ; Argument passed to save_handler. In the case of files, this is the path
    ; where data files are stored.
    ; As of PHP 4.0.1, you can define the path as:
    ; session.save_path = "N;/path"
    ; where N is an integer. Instead of storing all the session files in
    ; /path, what this will do is use subdirectories N-levels deep, and
    ; store the session data in those directories. This is useful if you
    ; or your OS have problems with lots of files in one directory, and is
    ; a more efficient layout for servers that handle lots of sessions.
    ; NOTE 1: PHP will not create this directory structure automatically.
    ; You can use the script in the ext/session dir for that purpose.
    ; NOTE 2: See the section on garbage collection below if you choose to
    ; use subdirectories for session storage
    ; The file storage module creates files using mode 600 by default.
    ; You can change that by using
    ; session.save_path = "N;MODE;/path"
    ; where MODE is the octal representation of the mode. Note that this
    ; does not overwrite the process's umask.
    session.save_path = "/www/sessions"
    ; Whether to use cookies.
    session.use_cookies = 1
    ;session.cookie_secure =
    ; This option enables administrators to make their users invulnerable to
    ; attacks which involve passing session ids in URLs; defaults to 0.
    session.use_only_cookies = 1
    ; Name of the session (used as cookie name).
    session.name = ServerSessionIdentifier
    ; Initialize session on request startup.
    session.auto_start = 0
    ; Lifetime in seconds of cookie or, if 0, until browser is restarted.
    session.cookie_lifetime = 0
    ; The path for which the cookie is valid.
    session.cookie_path = /
    ; The domain for which the cookie is valid.
    session.cookie_domain =
    ; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
    session.cookie_httponly = 1
    ; Handler used to serialize data. php is the standard serializer of PHP.
    session.serialize_handler = php
    ; Define the probability that the 'garbage collection' process is started
    ; on every session initialization.
    ; The probability is calculated by using gc_probability/gc_divisor,
    ; e.g. 1/100 means there is a 1% chance that the GC process starts
    ; on each request.
    session.gc_probability = 1
    session.gc_divisor = 30
    ; After this number of seconds, stored data will be seen as 'garbage' and
    ; cleaned up by the garbage collection process.
    session.gc_maxlifetime = 3600
    ; NOTE: If you are using the subdirectory option for storing session files
    ; (see session.save_path above), then garbage collection does *not*
    ; happen automatically. You will need to do your own garbage
    ; collection through a shell script, cron entry, or some other method.
    ; For example, the following script would is the equivalent of
    ; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
    ; cd /path/to/sessions; find -cmin +24 | xargs rm
    ; PHP 4.2 and less have an undocumented feature/bug that allows you to
    ; to initialize a session variable in the global scope, albeit register_globals
    ; is disabled. PHP 4.3 and later will warn you, if this feature is used.
    ; You can disable the feature and the warning separately. At this time,
    ; the warning is only displayed, if bug_compat_42 is enabled.
    session.bug_compat_42 = 0
    session.bug_compat_warn = 1
    ; Check HTTP Referer to invalidate externally stored URLs containing ids.
    ; HTTP_REFERER has to contain this substring for the session to be
    ; considered as valid.
    session.referer_check =
    ; How many bytes to read from the file.
    session.entropy_length = 0
    ; Specified here to create the session id.
    session.entropy_file =
    ;session.entropy_length = 16
    ;session.entropy_file = /dev/urandom
    ; Set to {nocache,private,public,} to determine HTTP caching aspects
    ; or leave this empty to avoid sending anti-caching headers.
    session.cache_limiter = none
    ; Document expires after n minutes.
    session.cache_expire = 0
    ; trans sid support is disabled by default.
    ; Use of trans sid may risk your users security.
    ; Use this option with caution.
    ; - User may send URL contains active session ID
    ; to other person via. email/irc/etc.
    ; - URL that contains active session ID may be stored
    ; in publically accessible computer.
    ; - User may access your site with the same session ID
    ; always using URL stored in browser's history or bookmarks.
    session.use_trans_sid = 0
    ; Select a hash function
    ; 0: MD5 (128 bits)
    ; 1: SHA-1 (160 bits)
    session.hash_function = 1
    ; Define how many bits are stored in each character when converting
    ; the binary hash data to something readable.
    ; 4 bits: 0-9, a-f
    ; 5 bits: 0-9, a-v
    ; 6 bits: 0-9, a-z, A-Z, "-", ","
    session.hash_bits_per_character = 6
    ; The URL rewriter will look for URLs in a defined set of HTML tags.
    ; form/fieldset are special; if you include them here, the rewriter will
    ; add a hidden <input> field with the info which is otherwise appended
    ; to URLs. If you want XHTML conformity, remove the form entry.
    ; Note that all valid entries require a "=", even if no value follows.
    ;url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
    [MSSQL]
    ; Allow or prevent persistent links.
    mssql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    mssql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    mssql.max_links = -1
    ; Minimum error severity to display.
    mssql.min_error_severity = 10
    ; Minimum message severity to display.
    mssql.min_message_severity = 10
    ; Compatibility mode with old versions of PHP 3.0.
    mssql.compatability_mode = Off
    ; Connect timeout
    ;mssql.connect_timeout = 5
    ; Query timeout
    ;mssql.timeout = 60
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textlimit = 4096
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textsize = 4096
    ; Limits the number of records in each batch. 0 = all records in one batch.
    ;mssql.batchsize = 0
    ; Specify how datetime and datetim4 columns are returned
    ; On => Returns data converted to SQL server settings
    ; Off => Returns values as YYYY-MM-DD hh:mm:ss
    ;mssql.datetimeconvert = On
    ; Use NT authentication when connecting to the server
    mssql.secure_connection = Off
    ; Specify max number of processes. -1 = library default
    ; msdlib defaults to 25
    ; FreeTDS defaults to 4096
    ;mssql.max_procs = -1
    ; Specify client character set.
    ; If empty or not set the client charset from freetds.comf is used
    ; This is only used when compiled with FreeTDS
    ;mssql.charset = "ISO-8859-1"
    [Assertion]
    ; Assert(expr); active by default.
    ;assert.active = On
    ; Issue a PHP warning for each failed assertion.
    ;assert.warning = On
    ; Don't bail out by default.
    ;assert.bail = Off
    ; User-function to be called if an assertion fails.
    ;assert.callback = 0
    ; Eval the expression with current error_reporting(). Set to true if you want
    ; error_reporting(0) around the eval().
    ;assert.quiet_eval = 0
    [COM]
    ; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
    ;com.typelib_file =
    ; allow Distributed-COM calls
    ;com.allow_dcom = true
    ; autoregister constants of a components typlib on com_load()
    ;com.autoregister_typelib = true
    ; register constants casesensitive
    ;com.autoregister_casesensitive = false
    ; show warnings on duplicate constant registrations
    ;com.autoregister_verbose = true
    [mbstring]
    ; language for internal character representation.
    ;mbstring.language = Japanese
    ; internal/script encoding.
    ; Some encoding cannot work as internal encoding.
    ; (e.g. SJIS, BIG5, ISO-2022-*)
    ;mbstring.internal_encoding = EUC-JP
    ; http input encoding.
    ;mbstring.http_input = auto
    ; http output encoding. mb_output_handler must be
    ; registered as output buffer to function
    ;mbstring.http_output = SJIS
    ; enable automatic encoding translation according to
    ; mbstring.internal_encoding setting. Input chars are
    ; converted to internal encoding by setting this to On.
    ; Note: Do _not_ use automatic encoding translation for
    ; portable libs/applications.
    ;mbstring.encoding_translation = Off
    ; automatic encoding detection order.
    ; auto means
    ;mbstring.detect_order = auto
    ; substitute_character used when character cannot be converted
    ; one from another
    ;mbstring.substitute_character = none;
    ; overload(replace) single byte functions by mbstring functions.
    ; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
    ; etc. Possible values are 0,1,2,4 or combination of them.
    ; For example, 7 for overload everything.
    ; 0: No overload
    ; 1: Overload mail() function
    ; 2: Overload str*() functions
    ; 4: Overload ereg*() functions
    ;mbstring.func_overload = 0
    ; enable strict encoding detection.
    ;mbstring.strict_encoding = Off
    [FrontBase]
    ;fbsql.allow_persistent = On
    ;fbsql.autocommit = On
    ;fbsql.show_timestamp_decimals = Off
    ;fbsql.default_database =
    ;fbsql.default_database_password =
    ;fbsql.default_host =
    ;fbsql.default_password =
    ;fbsql.default_user = "_SYSTEM"
    ;fbsql.generate_warnings = Off
    ;fbsql.max_connections = 128
    ;fbsql.max_links = 128
    ;fbsql.max_persistent = -1
    ;fbsql.max_results = 128
    [gd]
    ; Tell the jpeg decode to libjpeg warnings and try to create
    ; a gd image. The warning will then be displayed as notices
    ; disabled by default
    ;gd.jpeg_ignore_warning = 0
    [exif]
    ; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
    ; With mbstring support this will automatically be converted into the encoding
    ; given by corresponding encode setting. When empty mbstring.internal_encoding
    ; is used. For the decode settings you can distinguish between motorola and
    ; intel byte order. A decode setting cannot be empty.
    ;exif.encode_unicode = ISO-8859-15
    ;exif.decode_unicode_motorola = UCS-2BE
    ;exif.decode_unicode_intel = UCS-2LE
    ;exif.encode_jis =
    ;exif.decode_jis_motorola = JIS
    ;exif.decode_jis_intel = JIS
    [Tidy]
    ; The path to a default tidy configuration file to use when using tidy
    ;tidy.default_config = /usr/local/lib/php/default.tcfg
    ; Should tidy clean and repair output automatically?
    ; WARNING: Do not use this option if you are generating non-html content
    ; such as dynamic images
    tidy.clean_output = Off
    [soap]
    ; Enables or disables WSDL caching feature.
    soap.wsdl_cache_enabled=1
    ; Sets the directory name where SOAP extension will put cache files.
    soap.wsdl_cache_dir="/tmp"
    ; (time to live) Sets the number of second while cached file will be used
    ; instead of original one.
    soap.wsdl_cache_ttl=86400
    ; available extensions
    ;extension=bcmath.so
    ;extension=bz2.so
    ;extension=calendar.so
    ;extension=curl.so
    ;extension=dba.so
    ;extension=dbase.so
    ;extension=exif.so
    ;extension=ftp.so
    extension=gd.so
    extension=gettext.so
    ;extension=iconv.so
    ;extension=imap.so
    ;extension=json.so
    ;extension=ldap.so
    extension=mcrypt.so
    ;extension=mime_magic.so
    extension=mysql.so
    ;extension=mysqli.so
    ;extension=ncurses.so
    ;extension=odbc.so
    extension=openssl.so
    extension=pdo.so
    extension=pdo_mysql.so
    ;extension=pdo_odbc.so
    ;extension=pdo_pgsql.so
    ;extension=pdo_sqlite.so
    ;extension=pgsql.so
    ;extension=posix.so
    ;extension=pspell.so
    extension=session.so
    ;extension=shmop.so
    ;extension=snmp.so
    ;extension=soap.so
    extension=sockets.so
    ;extension=sqlite.so
    ;extension=sysvmsg.so
    ;extension=sysvsem.so
    ;extension=sysvshm.so
    ;extension=tidy.so
    ;extension=xmlrpc.so
    ;extension=xsl.so
    ;extension=zip.so
    extension=zlib.so
    ; Local Variables:
    ; tab-width: 4
    ; End:
    Some more info:
    [root@Taurine etc]# php-cgi -m
    [PHP Modules]
    cgi-fcgi
    Core
    ctype
    date
    dom
    ereg
    fileinfo
    filter
    gettext
    hash
    libxml
    mbstring
    mysql
    mysqlnd
    openssl
    pcre
    PDO
    pdo_mysql
    Reflection
    session
    SimpleXML
    sockets
    SPL
    standard
    tokenizer
    xml
    xmlreader
    xmlwriter
    zlib
    [Zend Modules]
    [root@Taurine etc]# php-cgi -v
    PHP 5.3.0 with Suhosin-Patch (cgi-fcgi) (built: Sep 16 2009 13:55:34)
    Copyright (c) 1997-2009 The PHP Group
    Zend Engine v2.3.0, Copyright (c) 1998-2009 Zend Technologies
    [root@Taurine etc]# cd /usr/lib/php/modules/
    [root@Taurine modules]# ls -alh
    totalt 3,2M
    drwxr-xr-x 2 root root 4,0K 16 sep 13.57 .
    drwxr-xr-x 4 root root 4,0K 16 sep 13.57 ..
    -rwxr-xr-x 1 root root 27K 16 sep 13.57 bcmath.so
    -rwxr-xr-x 1 root root 21K 16 sep 13.57 bz2.so
    -rwxr-xr-x 1 root root 25K 16 sep 13.57 calendar.so
    -rwxr-xr-x 1 root root 51K 16 sep 13.57 dba.so
    -rwxr-xr-x 1 root root 52K 16 sep 13.57 exif.so
    -rwxr-xr-x 1 root root 46K 16 sep 13.57 ftp.so
    -rwxr-xr-x 1 root root 11K 16 sep 13.57 gettext.so
    -rwxr-xr-x 1 root root 37K 16 sep 13.57 iconv.so
    -rwxr-xr-x 1 root root 1,2M 16 sep 13.57 imap.so
    -rwxr-xr-x 1 root root 35K 16 sep 13.57 json.so
    -rwxr-xr-x 1 root root 43K 16 sep 13.57 mysql.so
    -rwxr-xr-x 1 root root 109K 16 sep 13.57 mysqli.so
    -rwxr-xr-x 1 root root 110K 16 sep 13.57 openssl.so
    -rwxr-xr-x 1 root root 98K 16 sep 13.57 pdo.so
    -rwxr-xr-x 1 root root 24K 16 sep 13.57 pdo_mysql.so
    -rwxr-xr-x 1 root root 286K 16 sep 13.57 phar.so
    -rwxr-xr-x 1 root root 26K 16 sep 13.57 posix.so
    -rwxr-xr-x 1 root root 9,8K 16 sep 13.57 shmop.so
    -rwxr-xr-x 1 root root 356K 16 sep 13.57 soap.so
    -rwxr-xr-x 1 root root 46K 16 sep 13.57 sockets.so
    -rwxr-xr-x 1 root root 355K 16 sep 13.57 sqlite.so
    -rwxr-xr-x 1 root root 15K 16 sep 13.57 sysvmsg.so
    -rwxr-xr-x 1 root root 8,3K 16 sep 13.57 sysvsem.so
    -rwxr-xr-x 1 root root 11K 16 sep 13.57 sysvshm.so
    -rwxr-xr-x 1 root root 79K 16 sep 13.57 xmlrpc.so
    -rwxr-xr-x 1 root root 79K 16 sep 13.57 zip.so
    Last edited by nullvoid (2009-09-22 17:39:47)

  • Why ribbon XML does not work in Excel 2007?

    I installed 4 VSTO Excel add-ins on an Excel 2007 PC today. The two that use a visual designer ribbon worked fine. But the 2 that use a Ribbon (XML) did not. The add-in starts ok. But the ribbon does not show. Why would that be?
    I wrote two more add-ins to demonstrate the problem. One puts an OK button on the ribbon using the visual designer. That add-in installs on the excel  2007 PC and works as it should. But the 2nd, an add-in that uses Ribbon (XML) to put a button on the
    ribbon, does not work.  The add-in does not display on the ribbon.
    Here is the code of the Ribbon (XML) add-in project.  How to get a ribbon (XML) ribbon to display in excel 2007?
    thanks,
    using System;
    using System.Collections.Generic;
    using System.Linq;
    using System.Text;
    using System.Xml.Linq;
    using Excel = Microsoft.Office.Interop.Excel;
    using Office = Microsoft.Office.Core;
    using Microsoft.Office.Tools.Excel;
    namespace ExcelAddIn4
    public partial class ThisAddIn
    private void ThisAddIn_Startup(object sender, System.EventArgs e)
    private void ThisAddIn_Shutdown(object sender, System.EventArgs e)
    protected override Office.IRibbonExtensibility CreateRibbonExtensibilityObject()
    return new Ribbon1();
    #region VSTO generated code
    /// <summary>
    /// Required method for Designer support - do not modify
    /// the contents of this method with the code editor.
    /// </summary>
    private void InternalStartup()
    this.Startup += new System.EventHandler(ThisAddIn_Startup);
    this.Shutdown += new System.EventHandler(ThisAddIn_Shutdown);
    #endregion
    <?xml version="1.0" encoding="UTF-8"?>
    <customUI xmlns="http://schemas.microsoft.com/office/2009/07/customui" onLoad="Ribbon_Load">
    <ribbon>
    <tabs>
    <tab idMso="TabAddIns">
    <group id="ContentGroup" label="Content">
    <button id="Button1" label="ok" screentip="Text"
    onAction="Button_OnAction" supertip="Inserts text at the cursor location"/>
    </group>
    </tab>
    </tabs>
    </ribbon>
    </customUI>
    using System;
    using System.Collections.Generic;
    using System.IO;
    using System.Linq;
    using System.Reflection;
    using System.Runtime.InteropServices;
    using System.Text;
    using System.Windows.Forms;
    using Office = Microsoft.Office.Core;
    // TODO: Follow these steps to enable the Ribbon (XML) item:
    // 1: Copy the following code block into the ThisAddin, ThisWorkbook, or ThisDocument class.
    // protected override Microsoft.Office.Core.IRibbonExtensibility CreateRibbonExtensibilityObject()
    // return new Ribbon1();
    // 2. Create callback methods in the "Ribbon Callbacks" region of this class to handle user
    // actions, such as clicking a button. Note: if you have exported this Ribbon from the Ribbon designer,
    // move your code from the event handlers to the callback methods and modify the code to work with the
    // Ribbon extensibility (RibbonX) programming model.
    // 3. Assign attributes to the control tags in the Ribbon XML file to identify the appropriate callback methods in your code.
    // For more information, see the Ribbon XML documentation in the Visual Studio Tools for Office Help.
    namespace ExcelAddIn4
    [ComVisible(true)]
    public class Ribbon1 : Office.IRibbonExtensibility
    private Office.IRibbonUI ribbon;
    public Ribbon1()
    public void Button_OnAction(Office.IRibbonControl control)
    MessageBox.Show("Button_OnAction");
    #region IRibbonExtensibility Members
    public string GetCustomUI(string ribbonID)
    return GetResourceText("ExcelAddIn4.Ribbon1.xml");
    #endregion
    #region Ribbon Callbacks
    //Create callback methods here. For more information about adding callback methods, visit http://go.microsoft.com/fwlink/?LinkID=271226
    public void Ribbon_Load(Office.IRibbonUI ribbonUI)
    this.ribbon = ribbonUI;
    #endregion
    #region Helpers
    private static string GetResourceText(string resourceName)
    Assembly asm = Assembly.GetExecutingAssembly();
    string[] resourceNames = asm.GetManifestResourceNames();
    for (int i = 0; i < resourceNames.Length; ++i)
    if (string.Compare(resourceName, resourceNames[i], StringComparison.OrdinalIgnoreCase) == 0)
    using (StreamReader resourceReader = new StreamReader(asm.GetManifestResourceStream(resourceNames[i])))
    if (resourceReader != null)
    return resourceReader.ReadToEnd();
    return null;
    #endregion

    Hello Steve,
    Most probably you have got an error in the ribbon XML markup. See
    How to: Show Add-in User Interface Errors for more information.
    I have noticed the following xml namespace:
    <customUI xmlns="http://schemas.microsoft.com/office/2009/07/customui" onLoad="Ribbon_Load">
    Use the following one instead:
    <customUI xmlns="http://schemas.microsoft.com/office/2006/01/customui"
    Also make sure that specified idMso values exist in Office 2007.
    You can read more about the Fluent UI (aka Ribbon UI) in the following series of articles in MSDN:
    1.
    Customizing the 2007 Office Fluent Ribbon for Developers (Part 1 of 3)
    2.
    Customizing the 2007 Office Fluent Ribbon for Developers (Part 2 of 3)
    3.
    Customizing the 2007 Office Fluent Ribbon for Developers (Part 3 of 3)

  • Outbound FAX is not working

    Outbound FAX is not working. Below is the Call Flow
    FAX ServeràH.323àCUCMàMGCPàGatewayàE1 PRIàPSTN
    The CUCM version is 8.0.3 while the gateway IOS version is 12.4(24)T5.
    Collected the following
    Packet Captures between FAX server and CUCM
    CUCM traces
    Debugs in PSTN Gateway
    Below are the observations
    H.225 Setup message is seen in packet captures and CUCM traces. See snippet below
    16:53:00.684 |In  Message -- H225SetupMsg -- Protocol= H225Protocol|*^*^*
    16:53:00.684 |Ie - H225BearerCapabilityIe -- IEData= 04 03 90 90 A5 |*^*^*
    16:53:00.685 |Ie - Q931CalledPartyIe -- IEData= 70 09 A1 39 36 33 32 33 39 39 38 |*^*^*
    16:53:00.685 |Ie - H225UserUserIe -- IEData= 7E 00 86 05 30 88 06 00 08 91 4A 00 05 22 80 B5 00 00 30 13 44 69 61 6C 6F 67 69 63 20 43 6F 72 70 6F 72 61 74 69 6F 6E 00 AC 15 98 05 06 B8 00 14 15 79 1B C9 3E 02 1F 3F 03 80 B9 FE 5F AC 75 00 D5 0D 98 00 07 00 AC 15 98 14 07 FB 11 00 25 13 79 1B C9 3E 02 1F 3F 03 80 B9 FE 5F AC 75 01 00 01 00 01 00 01 00 01 00 01 40 40 B5 00 00 30 14 44 69 61 6C 6F 67 69 63 20 43 6F 72 70 6F 72 61 74 69 6F 6E 10 80 01 00 |*^*^*
    16:53:00.685 |MMan_Id= 0. (iep=  0 dsl=  0 sapi=  0 ces= 0 IpAddr=149815ac IpPort=2043)|*^*^*
    16:53:00.685 |IsdnMsgData1= 08 02 5B CA 05 04 03 90 90 A5 70 09 A1 39 36 33 32 33 39 39 38 7E 00 86 05 30 88 06 00 08 91 4A 00 05 22 80 B5 00 00 30 13 44 69 61 6C 6F 67 69 63 20 43 6F 72 70 6F 72 61 74 69 6F 6E 00 AC 15 98 05 06 B8 00 14 15 79 1B C9 3E 02 1F 3F 03 80 B9 FE 5F AC 75 00 D5 0D 98 00 07 00 AC 15 98 14 07 FB 11 00 25 13 79 1B C9 3E 02 1F 3F 03 80 B9 FE 5F AC 75 01 00 01 00 01 00 01 00 01 00 01 40 40 B5 00 00 30 14 44 69 61 6C 6F 67 69 63 20 43 6F 72 70 6F 72 61 74 69 6F 6E 10 80 01 00 |*^*^*
    16:53:00.685 |value H323-UserInformation ::= |*^*^*
    16:53:00.685 |SPROCRas - {
      h323-uu-pdu
        h323-message-body setup :
            protocolIdentifier { 0 0 8 2250 0 5 },
            sourceInfo
              vendor
                vendor
                  t35CountryCode 181,
                  t35Extension 0,
                  manufacturerCode 48
                productId '4469616C6F67696320436F72706F726174 ...'H
              terminal
              mc FALSE,
              undefinedNode FALSE
            destCallSignalAddress ipAddress :
                ip 'AC159805'H,
                port 1720
            activeMC FALSE,
            conferenceID '1415791BC93E021F3F0380B9FE5FAC75'H,
            conferenceGoal create : NULL,
            callType pointToPoint : NULL,
            sourceCallSignalAddress ipAddress :
                ip 'AC159814'H,
                port 2043
            callIdentifier
              guid '2513791BC93E021F3F0380B9FE5FAC75'H
            mediaWaitForConnect FALSE,|*^*^*
    16:53:00.686 |
            canOverlapSend FALSE,
            multipleCalls FALSE,
            maintainConnection FALSE,
            presentationIndicator presentationAllowed : NULL,
            screeningIndicator userProvidedVerifiedAndFailed
        nonStandardData
          nonStandardIdentifier h221NonStandard :
              t35CountryCode 181,
              t35Extension 0,
              manufacturerCode 48
          data '4469616C6F67696320436F72706F726174 ...'H
        h245Tunneling FALSE
      }|*^*^*
    Based on this, the CUCM is doing correct digit analysis and routes the call to MGCP gateway’s endpoint S0/SU0/DS1-0/[email protected]
    Gateway sends the ISDN q931 setup message to PSTN for which it does get the Call Proceed and Progress indicators
    The gateway is dropping call in Cause Code “0x80AF - Resource unavailable, unspecified”. See Snippet below
    016325: *May  2 17:12:47.661: MGCP Packet received from 172.21.152.5:2427--->
    CRCX 5493 S0/SU0/DS1-0/[email protected] MGCP 0.1
    C: D000000003d354dd000000F500000016
    X: 1
    L: p:20, a:PCMU, s:off, t:b8, fxr/fx:t38
    M: recvonly
    R: D/[0-9ABCD*#]
    Q: process,loop
    <---
    016383: *May  2 17:12:47.669: ISDN Se0/0/0:15 Q931: TX -> SETUP pd = 8  callref = 0x0016
            Sending Complete
            Bearer Capability i = 0x8090A3
                    Standard = CCITT
                    Transfer Capability = Speech 
                    Transfer Mode = Circuit
                    Transfer Rate = 64 kbit/s
            Channel ID i = 0xA98381
                    Exclusive, Channel 1
            Calling Party Number i = 0x0083, N/A
                    Plan:Unknown, Type:Unknown
            Called Party Number i = 0xA0, '96323998'
                    Plan:Unknown, Type:National
    016384: *May  2 17:12:47.757: ISDN Se0/0/0:15 Q931: RX <- CALL_PROC pd = 8  callref = 0x8016
            Channel ID i = 0xA98381
                    Exclusive, Channel 1
    016385: *May  2 17:12:47.761: ISDN Se0/0/0:15 Q931: RX <- PROGRESS pd = 8  callref = 0x8016
            Progress Ind i = 0x8181 - Call not end-to-end ISDN, may have in-band info
    016386: *May  2 09:12:48.193: %C3800_ENVM-3-MFAIL_OFF: There is more than one failure with the Power System 1 or this Power System h
    as been turned off.
    016387: *May  2 17:12:51.669: //494/2E810F7780E1/CCAPI/cc_handle_inter_digit_timer:
       Generate inter-digit timeout CC_EV_CALL_DIGIT_END event
    016388: *May  2 17:12:59.773: ISDN Se0/0/0:15 Q931: TX -> DISCONNECT pd = 8  callref = 0x0016
            Cause i = 0x80AF - Resource unavailable, unspecified
    From the Fax Utility it shows No answer at Fax Number. Also it rings the remmote fax machine twice (Actually i can hear the ring as the macine is beside me)
    Please help me to solve the issue. Except this other functions are working properly. Moreover I can send internal Fax from one user to other.
    Thanks and Regards,
    Ashfaque.

    Just a quick update, as per Cisco TAC the CUCM version 8.0.3 does not support gateway IOS version is 12.4(24)T5 (Later I found its only for conference option). So we upgraded the IOS to 15.1(1)T3. But still having the sam issue.
    Thanks,
    Ashfaque

  • Caldav does not work after upgrade from 10.6.8

    Hello!
    After upgrading two test servers from 10.6.8 to 10.7.2 with no problems i decided last night it is time to upgrade our production server.
    Took sometime but everything went well except for caldav service. If I understand the log right the migration to lion-calendars crashes when the script wants to put the calendars from filesystem into a database.
    After reboot the script runs into the same error.
    BTW the notification service does not work also. But that is not very important.
    Every help is appreciated, bye
    eweri
    Here is the part of the log file:
    more /var/log/caldavd/error.log
    2011-10-26 08:28:33+0200 [-] Log opened.
    2011-10-26 08:28:33+0200 [-] twistd 11.0.0 (/System/Library/Frameworks/Python.framework/Versions/2.7/Resources/Python.app/ Contents/MacOS/Python 2.7.1) starting up.
    2011-10-26 08:28:33+0200 [-] reactor class: twext.internet.kqreactor.KQueueReactor.
    2011-10-26 08:28:33+0200 [-] calendarserver.accesslog.AMPLoggingFactory starting on "'/var/run/caldavd/caldavd.sock'"
    2011-10-26 08:28:33+0200 [-] calendarserver.tap.caldav.CalDAVStatisticsServer starting on "'/var/run/caldavd-stats.sock'"
    2011-10-26 08:28:33+0200 [-] [twistedcaldav.upgrade#warn] Upgrading to version 2
    2011-10-26 08:28:33+0200 [-] [twistedcaldav.upgrade#warn] Regular collection hidden: /Library/Server/Calendar and Contacts/Documents/calendars/__uids__/13/93/139328E4-76C8-427C-AD0C-CB6D102C7D7 F/outbox
    2011-10-26 08:28:33+0200 [-] [twistedcaldav.upgrade#warn] Regular collection hidden: /Library/Server/Calendar and Contacts/Documents/calendars/__uids__/21/D0/21D05230-A847-4B8D-B810-CFE793F634C B/outbox
    2011-10-26 08:28:33+0200 [-] [twistedcaldav.upgrade#warn] Regular collection hidden: /Library/Server/Calendar and Contacts/Documents/calendars/__uids__/84/5E/845E1E6D-F13B-4233-A4E5-0055F085388 1/outbox
    2011-10-26 08:28:33+0200 [-] [twistedcaldav.upgrade#warn] Regular collection hidden: /Library/Server/Calendar and Contacts/Documents/calendars/__uids__/B5/B6/B5B6BAA3-A5E0-4526-B7F3-15DC2811E08 3/outbox
    2011-10-26 08:28:33+0200 [-] [twistedcaldav.upgrade#warn] Regular collection hidden: /Library/Server/Calendar and Contacts/Documents/calendars/__uids__/E0/2B/E02BEF32-1714-4C5B-85DF-0184DA8B313 3/outbox
    2011-10-26 08:28:33+0200 [-] [twistedcaldav.upgrade#warn] Regular collection hidden: /Library/Server/Calendar and Contacts/Documents/calendars/__uids__/E2/64/E264473A-CEC7-4E1A-9756-59DE5AF62E5 0/outbox
    2011-10-26 08:28:33+0200 [-] [twistedcaldav.upgrade#warn] Regular collection hidden: /Library/Server/Calendar and Contacts/Documents/calendars/__uids__/wi/ki/wiki-zm-r/inbox
    2011-10-26 08:28:33+0200 [-] [twistedcaldav.upgrade#warn] Upgraded to version 2
    2011-10-26 08:28:33+0200 [-] [txdav.common.datastore.util.UpgradeDatabaseSchemaService#warn] Beginning database schema check.
    2011-10-26 08:28:33+0200 [-] [txdav.common.datastore.util.UpgradeDatabaseSchemaService#warn] Required schema version: 3.
    2011-10-26 08:28:33+0200 [-] [txdav.common.datastore.util.UpgradeDatabaseSchemaService#warn] Actual schema version: 3.
    2011-10-26 08:28:33+0200 [-] [txdav.common.datastore.util.UpgradeDatabaseSchemaService#warn] Schema version check complete: no upgrade needed.
    2011-10-26 08:28:33+0200 [-] [txdav.common.datastore.util.UpgradeDatabaseSchemaService#warn] Database schema check complete, launching database service.
    2011-10-26 08:28:33+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Beginning filesystem -> database upgrade.
    2011-10-26 08:28:33+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'XXXXXXXX-07B1-4733-AE89-8728D0C2CB4A'
    2011-10-26 08:28:34+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'XXXXXXXX-5E85-4CC9-902A-A101164BD83F'
    2011-10-26 08:28:34+0200 [Uninitialized] [twistedcaldav.notify.NotificationClientFactory#error] Unable to connect to notification server: [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionRefusedError'>: Connection was refused by other side: 61: Connection refused.
    2011-10-26 08:28:34+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'XXXXXXXX-76C8-427C-AD0C-CB6D102C7D7F'
    2011-10-26 08:28:37+0200 [Uninitialized] [twistedcaldav.notify.NotificationClientFactory#error] Unable to connect to notification server: [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionRefusedError'>: Connection was refused by other side: 61: Connection refused.
    2011-10-26 08:28:46+0200 [Uninitialized] [twistedcaldav.notify.NotificationClientFactory#error] Unable to connect to notification server: [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionRefusedError'>: Connection was refused by other side: 61: Connection refused.
    2011-10-26 08:28:58+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'XXXXXXXX-A847-4B8D-B810-CFE793F634CB'
    2011-10-26 08:28:59+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'XXXXXXXX-6E96-4671-9BEB-FAABDB623EA3'
    2011-10-26 08:28:59+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'XXXXXXXX-C56A-462D-90E0-D60285CCF751'
    2011-10-26 08:28:59+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'XXXXXXXX-F13B-4233-A4E5-0055F0853881'
    2011-10-26 08:29:07+0200 [Uninitialized] [twistedcaldav.notify.NotificationClientFactory#error] Unable to connect to notification server: [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionRefusedError'>: Connection was refused by other side: 61: Connection refused.
    2011-10-26 08:29:11+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'XXXXXXXX-A2A9-4B21-8735-577F24ABA6D5'
    2011-10-26 08:29:11+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'XXXXXXXX-7A55-4B63-AC42-43151A1F4810'
    2011-10-26 08:29:11+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'XXXXXXXX-F38C-489D-88A2-42B5F47BB4AD'
    2011-10-26 08:29:11+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'XXXXXXXX-A5E0-4526-B7F3-15DC2811E083'
    2011-10-26 08:29:12+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'XXXXXXXX-97BE-43C3-94F7-A8C99AB92425'
    2011-10-26 08:29:12+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'XXXXXXXX-9C74-412D-8DC0-69E3ED918CAD'
    2011-10-26 08:29:13+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'XXXXXXXX-D6BD-450E-A8A1-708C063EF05F'
    2011-10-26 08:29:13+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'XXXXXXXX-EC4C-43B6-A6A8-EA02F4024EB3'
    2011-10-26 08:29:14+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'XXXXXXXX-1714-4C5B-85DF-0184DA8B3133'
    2011-10-26 08:29:15+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'XXXXXXXX-CEC7-4E1A-9756-59DE5AF62E50'
    2011-10-26 08:29:26+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'XXXXXXXX-E113-470C-A824-0D988A8319FB'
    2011-10-26 08:29:30+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'wiki-XXXXXXXX'
    2011-10-26 08:29:32+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'wiki-XXXXXXXX'
    2011-10-26 08:29:32+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'wiki-XXXXXXXX'
    2011-10-26 08:29:33+0200 [-] Unhandled error in Deferred:
    2011-10-26 08:29:33+0200 [-] Unhandled Error
            Traceback (most recent call last):
              File "/System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twi sted/internet/defer.py", line 361, in callback
                self._startRunCallbacks(result)
              File "/System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twi sted/internet/defer.py", line 455, in _startRunCallbacks
                self._runCallbacks()
              File "/System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twi sted/internet/defer.py", line 542, in _runCallbacks
                current.result = callback(current.result, *args, **kw)
              File "/System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twi sted/internet/defer.py", line 1076, in gotResult
                _inlineCallbacks(r, g, deferred)
            --- <exception caught here> ---
              File "/System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twi sted/internet/defer.py", line 1020, in _inlineCallbacks
                result = g.send(result)
              File "/usr/share/caldavd/lib/python/txdav/common/datastore/util.py", line 146, in doMigration
                uid = fileHome.uid()
            exceptions.AttributeError: 'NoneType' object has no attribute 'uid'
    2011-10-26 08:30:13+0200 [Uninitialized] [twistedcaldav.notify.NotificationClientFactory#error] Unable to connect to notification server: [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionRefusedError'>: Connection was refused by other side: 61: Connection refused.
    2011-10-26 08:33:19+0200 [Uninitialized] [twistedcaldav.notify.NotificationClientFactory#error] Unable to connect to notification server: [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionRefusedError'>: Connection was refused by other side: 61: Connection refused.
    2011-10-26 08:42:07+0200 [Uninitialized] [twistedcaldav.notify.NotificationClientFactory#error] Unable to connect to notification server: [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionRefusedError'>: Connection was refused by other side: 61: Connection refused.
    2011-10-26 09:06:13+0200 [Uninitialized] [twistedcaldav.notify.NotificationClientFactory#error] Unable to connect to notification server: [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionRefusedError'>: Connection was refused by other side: 61: Connection refused.
    2011-10-26 09:44:28+0200 [-] Received SIGTERM, shutting down.
    2011-10-26 09:44:28+0200 [-] (UNIX Port '/var/run/caldavd-stats.sock' Closed)
    2011-10-26 09:44:28+0200 [-] (UNIX Port '/var/run/caldavd/caldavd.sock' Closed)
    2011-10-26 09:44:28+0200 [-] Main loop terminated.
    2011-10-26 09:44:29+0200 [-] Server Shut Down.
    2011-10-26 09:46:13+0200 [-] Log opened.
    2011-10-26 09:46:13+0200 [-] twistd 11.0.0 (/System/Library/Frameworks/Python.framework/Versions/2.7/Resources/Python.app/ Contents/MacOS/Python 2.7.1) starting up.
    2011-10-26 09:46:13+0200 [-] reactor class: twext.internet.kqreactor.KQueueReactor.
    2011-10-26 09:46:13+0200 [-] calendarserver.accesslog.AMPLoggingFactory starting on "'/var/run/caldavd/caldavd.sock'"
    2011-10-26 09:46:13+0200 [-] calendarserver.tap.caldav.CalDAVStatisticsServer starting on "'/var/run/caldavd-stats.sock'"
    2011-10-26 09:46:13+0200 [-] [txdav.common.datastore.util.UpgradeDatabaseSchemaService#warn] Beginning database schema check.
    2011-10-26 09:46:13+0200 [-] [txdav.common.datastore.util.UpgradeDatabaseSchemaService#warn] Required schema version: 3.
    2011-10-26 09:46:14+0200 [-] [txdav.common.datastore.util.UpgradeDatabaseSchemaService#warn] Actual schema version: 3.
    2011-10-26 09:46:14+0200 [-] [txdav.common.datastore.util.UpgradeDatabaseSchemaService#warn] Schema version check complete: no upgrade needed.
    2011-10-26 09:46:14+0200 [-] [txdav.common.datastore.util.UpgradeDatabaseSchemaService#warn] Database schema check complete, launching database service.
    2011-10-26 09:46:14+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Beginning filesystem -> database upgrade.
    2011-10-26 09:46:14+0200 [-] Unhandled error in Deferred:
    2011-10-26 09:46:14+0200 [-] Unhandled Error
            Traceback (most recent call last):
              File "/System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twi sted/application/service.py", line 184, in setServiceParent
                self.parent.addService(self)

    Just to let everybody know what I am trying at the moment:
    Found a thread where someone suggests to delete the postgresql-database:
    Detials in this thread https://discussions.apple.com/thread/3206720?start=0&tstart=0
    1. sudo serveradmin stop calendar addressbook
    2. copy old 10.6.8 calender data from backup ("../Library/CalendarServer/Documents/") to  /Library/Server/Calendar\ and\ Contacts/Documents/
    3. delete database: sudo dropdb -U _postgres caldav
    4. mv (if it exists)  /Library/Server/Calendar\ and\ Contacts/Documents/calendars-migrated to  /Library/Server/Calendar\ and\ Contacts/Documents/calendars-migrated-old
    5. sudo calendarserver_bootstrap_database
    6. now we start again: sudo serveradmin start calendar
    7. watch the log file - tail -f /var/log/caldavd/error.log
    And I get the same error as above but now I see a new one:
    2011-10-26 15:29:19+0200 [Uninitialized] [twistedcaldav.memcachepool.MemCacheClientFactory#error] MemCache connection failed: [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionRefusedError'>: Connection was refused by other side: 61: Connection refused.
    Every help is welcome, bye
    Christoph

  • Show AppXray dependencies does not work for all projects

    I have three projects. One of them will display the appxray dependncies and the other two will not. When I select show dependencies, nothing happens. There is no logging inside the workshop m7.log.0 but the .log has the following. How do I get this to work?
    Config details follow logging.
    !MESSAGE Warning: Detected recursive attempt by part com.m7.wide.eclipse.jstudio.DocEditor.jsp to create itself (this is probably, but not necessarily, a bug)
    !STACK 1
    org.eclipse.ui.PartInitException: Warning: Detected recursive attempt by part com.m7.wide.eclipse.jstudio.DocEditor.jsp to create itself (this is probably, but not necessarily, a bug)
         at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:543)
         at org.eclipse.ui.internal.WorkbenchPage$6.run(WorkbenchPage.java:1746)
         at org.eclipse.swt.widgets.Synchronizer.syncExec(Synchronizer.java:152)
         at org.eclipse.ui.internal.UISynchronizer.syncExec(UISynchronizer.java:28)
         at org.eclipse.swt.widgets.Display.syncExec(Display.java:3413)
         at org.eclipse.ui.internal.WorkbenchPage.getEditors(WorkbenchPage.java:1743)
         at com.m7.wide.eclipse.Util.activateEditor(Unknown Source)
         at com.m7.wide.eclipse.jstudio.A.requestFocus(Unknown Source)
         at com.m7.wide.doceditor.AbstractEditor.requestFocus(Unknown Source)
         at com.m7.wide.doceditor.AbstractPane.requestFocus(Unknown Source)
         at com.m7.wide.doceditor.flow.FlowDesignPane.requestFocus(Unknown Source)
         at com.m7.wide.doceditor.CompoundPane.requestFocus(Unknown Source)
         at com.m7.wide.doceditor.CompoundPane.setHidden(Unknown Source)
         at com.m7.wide.doceditor.MultiPaneEditor.activePaneChanged(Unknown Source)
         at com.m7.wide.eclipse.jstudio.PaneEditorPart.activate(Unknown Source)
         at com.m7.wide.eclipse.jstudio.DynamicMultiPageEditor.A(Unknown Source)
         at com.m7.wide.eclipse.jstudio.DynamicMultiPageEditor.pageChange(Unknown Source)
         at com.m7.wide.eclipse.jstudio.DynamicMultiPageEditor.createPages(Unknown Source)
         at org.eclipse.ui.part.MultiPageEditorPart.createPartControl(MultiPageEditorPart.java:241)
         at org.eclipse.ui.internal.EditorReference.createPartHelper(EditorReference.java:609)
         at org.eclipse.ui.internal.EditorReference.createPart(EditorReference.java:384)
         at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:552)
         at org.eclipse.ui.internal.PartPane.setVisible(PartPane.java:283)
         at org.eclipse.ui.internal.presentations.PresentablePart.setVisible(PresentablePart.java:126)
         at org.eclipse.ui.internal.presentations.util.PresentablePartFolder.select(PresentablePartFolder.java:268)
         at org.eclipse.ui.internal.presentations.util.LeftToRightTabOrder.select(LeftToRightTabOrder.java:65)
         at org.eclipse.ui.internal.presentations.util.TabbedStackPresentation.selectPart(TabbedStackPresentation.java:391)
         at org.eclipse.ui.internal.PartStack.refreshPresentationSelection(PartStack.java:1102)
         at org.eclipse.ui.internal.PartStack.setSelection(PartStack.java:1051)
         at org.eclipse.ui.internal.PartStack.showPart(PartStack.java:1256)
         at org.eclipse.ui.internal.PartStack.add(PartStack.java:442)
         at org.eclipse.ui.internal.EditorStack.add(EditorStack.java:109)
         at org.eclipse.ui.internal.EditorSashContainer.addEditor(EditorSashContainer.java:60)
         at org.eclipse.ui.internal.EditorAreaHelper.addToLayout(EditorAreaHelper.java:212)
         at org.eclipse.ui.internal.EditorAreaHelper.addEditor(EditorAreaHelper.java:202)
         at org.eclipse.ui.internal.EditorManager.createEditorTab(EditorManager.java:758)
         at org.eclipse.ui.internal.EditorManager.openEditorFromDescriptor(EditorManager.java:665)
         at org.eclipse.ui.internal.EditorManager.openEditor(EditorManager.java:628)
         at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditorBatched(WorkbenchPage.java:2360)
         at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditor(WorkbenchPage.java:2295)
         at org.eclipse.ui.internal.WorkbenchPage.access$9(WorkbenchPage.java:2287)
         at org.eclipse.ui.internal.WorkbenchPage$9.run(WorkbenchPage.java:2273)
         at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
         at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2268)
         at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2249)
         at org.eclipse.ui.ide.IDE.openEditor(IDE.java:753)
         at org.eclipse.ui.ide.IDE.openEditor(IDE.java:697)
         at com.m7.wide.eclipse.Eclipse3WideEnv.openEditor(Unknown Source)
         at com.m7.wide.eclipse.EclipseWideEnv.openEditor(Unknown Source)
         at com.m7.wide.project.artifact.action.OpenAction.run(Unknown Source)
         at com.m7.wide.eclipse.jstudio.appexplorer.AppExplorerTreeViewer.open(Unknown Source)
         at org.eclipse.jface.viewers.StructuredViewer$2.run(StructuredViewer.java:741)
         at org.eclipse.core.internal.runtime.InternalPlatform.run(InternalPlatform.java:1044)
         at org.eclipse.core.runtime.Platform.run(Platform.java:783)
         at org.eclipse.ui.internal.JFaceUtil$1.run(JFaceUtil.java:44)
         at org.eclipse.jface.util.SafeRunnable.run(SafeRunnable.java:148)
         at org.eclipse.jface.viewers.StructuredViewer.fireOpen(StructuredViewer.java:739)
         at org.eclipse.jface.viewers.StructuredViewer.handleOpen(StructuredViewer.java:968)
         at org.eclipse.jface.viewers.StructuredViewer$6.handleOpen(StructuredViewer.java:1067)
         at org.eclipse.jface.util.OpenStrategy.fireOpenEvent(OpenStrategy.java:243)
         at org.eclipse.jface.util.OpenStrategy.access$2(OpenStrategy.java:238)
         at org.eclipse.jface.util.OpenStrategy$1.handleEvent(OpenStrategy.java:277)
         at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)
         at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:843)
         at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3080)
         at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:2713)
         at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1699)
         at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:1663)
         at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:367)
         at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:143)
         at org.eclipse.ui.internal.ide.IDEApplication.run(IDEApplication.java:103)
         at org.eclipse.core.internal.runtime.PlatformActivator$1.run(PlatformActivator.java:226)
         at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:376)
         at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:163)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at org.eclipse.core.launcher.Main.invokeFramework(Main.java:334)
         at org.eclipse.core.launcher.Main.basicRun(Main.java:278)
         at org.eclipse.core.launcher.Main.run(Main.java:973)
         at org.eclipse.core.launcher.Main.eclipse_main(Main.java:948)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at com.m7.installer.util.NitroxMain$1.run(NitroxMain.java:29)
         at java.awt.event.InvocationEvent.dispatch(Unknown Source)
         at java.awt.EventQueue.dispatchEvent(Unknown Source)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.run(Unknown Source)
    !SUBENTRY 1 org.eclipse.ui 4 0 2005-12-13 11:58:43.346
    !MESSAGE Warning: Detected recursive attempt by part com.m7.wide.eclipse.jstudio.DocEditor.jsp to create itself (this is probably, but not necessarily, a bug)
    *** Date: Tue Dec 13 12:48:19 PST 2005
    *** Platform Details:
    *** System properties:
    awt.toolkit=sun.awt.windows.WToolkit
    eclipse.application=org.eclipse.ui.ide.workbench
    eclipse.buildId=M20050929-0840
    eclipse.commands=-os
    win32
    -ws
    win32
    -arch
    x86
    -launcher
    C:\packages\Eclipse3.1\eclipse\eclipse.exe
    -name
    Eclipse
    -showsplash
    600
    -exitdata
    7b4_30
    -feature
    com.m7.nitrox
    -application
    org.eclipse.ui.ide.workbench
    -vm
    C:\WINDOWS\system32\javaw.exe
    eclipse.product=com.m7.nitrox
    eclipse.startTime=1134504472516
    eclipse.vm=C:\WINDOWS\system32\javaw.exe
    eclipse.vmargs=-Xms128M
    -Xmx512M
    -Dosgi.splashLocation=C:\packages\Workshop_for_Struts_3.0_471\Workshop\splash.bmp
    -jar
    C:\packages\Eclipse3.1\eclipse\startup.jar
    eof=eof
    file.encoding=Cp1252
    file.encoding.pkg=sun.io
    file.separator=\
    java.awt.graphicsenv=sun.awt.Win32GraphicsEnvironment
    java.awt.printerjob=sun.awt.windows.WPrinterJob
    java.class.path=C:\packages\Eclipse3.1\eclipse\startup.jar
    java.class.version=48.0
    java.endorsed.dirs=C:\Program Files\Java\j2re1.4.2_04\lib\endorsed
    java.ext.dirs=C:\Program Files\Java\j2re1.4.2_04\lib\ext
    java.home=C:\Program Files\Java\j2re1.4.2_04
    java.io.tmpdir=C:\DOCUME~1\charris\LOCALS~1\Temp\
    java.library.path=C:\WINDOWS\system32;.;C:\WINDOWS\System32;C:\WINDOWS;C:\PROGRA~1\PVCS\vm\win32\bin;C:\PROGRA~1\PVCS\vm\common\bin\win32;C:\Program Files\Common Files\Software AG;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\system32\nls;C:\WINDOWS\system32\nls\ENGLISH;C:\Program Files\Attachmate\E!E2K\;C:\Magicsql\sqlany50\win;C:\Magicsql\netmap;c:\java\bin;c:\java\bin\pstools;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;C:\packages\apache-ant-1.6.2\bin;C:\Program Files\Novell\ZENworks\;C:\packages\jwsdp-1.6\jwsdp-shared\bin;Z:.;Y:.;
    java.runtime.name=Java(TM) 2 Runtime Environment, Standard Edition
    java.runtime.version=1.4.2_04-b05
    java.specification.name=Java Platform API Specification
    java.specification.vendor=Sun Microsystems Inc.
    java.specification.version=1.4
    java.util.prefs.PreferencesFactory=java.util.prefs.WindowsPreferencesFactory
    java.vendor=Sun Microsystems Inc.
    java.vendor.url=http://java.sun.com/
    java.vendor.url.bug=http://java.sun.com/cgi-bin/bugreport.cgi
    java.version=1.4.2_04
    java.vm.info=mixed mode
    java.vm.name=Java HotSpot(TM) Client VM
    java.vm.specification.name=Java Virtual Machine Specification
    java.vm.specification.vendor=Sun Microsystems Inc.
    java.vm.specification.version=1.0
    java.vm.vendor=Sun Microsystems Inc.
    java.vm.version=1.4.2_04-b05
    line.separator=
    m7.launcher=true
    org.eclipse.jdt.debug.ui.scrapbookActive=false
    org.osgi.framework.bootdelegation=*
    org.osgi.framework.executionenvironment=J2SE-1.4
    org.osgi.framework.language=en
    org.osgi.framework.os.name=WindowsXP
    org.osgi.framework.os.version=5.1
    org.osgi.framework.processor=x86
    org.osgi.framework.system.packages=javax.accessibility,javax.crypto,javax.crypto.interfaces,javax.crypto.spec,javax.imageio,javax.imageio.event,javax.imageio.metadata,javax.imageio.plugins.jpeg,javax.imageio.spi,javax.imageio.stream,javax.naming,javax.naming.directory,javax.naming.event,javax.naming.ldap,javax.naming.spi,javax.net,javax.net.ssl,javax.print,javax.print.attribute,javax.print.attribute.standard,javax.print.event,javax.rmi,javax.rmi.CORBA,javax.security.auth,javax.security.auth.callback,javax.security.auth.kerberos,javax.security.auth.login,javax.security.auth.spi,javax.security.auth.x500,javax.security.cert,javax.sound.midi,javax.sound.midi.spi,javax.sound.sampled,javax.sound.sampled.spi,javax.sql,javax.swing,javax.swing.border,javax.swing.colorchooser,javax.swing.event,javax.swing.filechooser,javax.swing.plaf,javax.swing.plaf.basic,javax.swing.plaf.metal,javax.swing.plaf.multi,javax.swing.table,javax.swing.text,javax.swing.text.html,javax.swing.text.html.parser,javax.swing.text.rtf,javax.swing.tree,javax.swing.undo,javax.transaction,javax.transaction.xa,javax.xml.parsers,javax.xml.transform,javax.xml.transform.dom,javax.xml.transform.sax,javax.xml.transform.stream,org.ietf.jgss,org.omg.CORBA,org.omg.CORBA_2_3,org.omg.CORBA_2_3.portable,org.omg.CORBA.DynAnyPackage,org.omg.CORBA.ORBPackage,org.omg.CORBA.portable,org.omg.CORBA.TypeCodePackage,org.omg.CosNaming,org.omg.CosNaming.NamingContextExtPackage,org.omg.CosNaming.NamingContextPackage,org.omg.Dynamic,org.omg.DynamicAny,org.omg.DynamicAny.DynAnyFactoryPackage,org.omg.DynamicAny.DynAnyPackage,org.omg.IOP,org.omg.IOP.CodecFactoryPackage,org.omg.IOP.CodecPackage,org.omg.Messaging,org.omg.PortableInterceptor,org.omg.PortableInterceptor.ORBInitInfoPackage,org.omg.PortableServer,org.omg.PortableServer.CurrentPackage,org.omg.PortableServer.POAManagerPackage,org.omg.PortableServer.POAPackage,org.omg.PortableServer.portable,org.omg.PortableServer.ServantLocatorPackage,org.omg.SendingContext,org.omg.stub.java.rmi,org.w3c.dom,org.xml.sax,org.xml.sax.ext,org.xml.sax.helpers
    org.osgi.framework.vendor=Eclipse
    org.osgi.framework.version=1.3.0
    org.osgi.supports.framework.extension=true
    org.w3c.css.sac.parser=com.steadystate.css.parser.SACParser
    org.xml.sax.driver=org.apache.crimson.parser.XMLReaderImpl
    os.arch=x86
    os.name=Windows XP
    os.version=5.1
    osgi.arch=x86
    osgi.bundles=org.eclipse.core.runtime@2:start, org.eclipse.update.configurator@3:start
    osgi.bundlestore=c:\packages\Eclipse3.1\eclipse\configuration\org.eclipse.osgi\bundles
    osgi.configuration.area=file:/c:/packages/Eclipse3.1/eclipse/configuration/
    osgi.framework=file:/c:/packages/Eclipse3.1/eclipse/plugins/org.eclipse.osgi_3.1.1.jar
    osgi.framework.beginningstartlevel=1
    osgi.framework.shape=jar
    osgi.framework.version=3.1.1
    osgi.install.area=file:/c:/packages/Eclipse3.1/eclipse/
    osgi.instance.area=file:/C:/packages/Eclipse3.1/eclipse/workspace/
    osgi.instance.area.default=file:/C:/Documents and Settings/charris/workspace/
    osgi.logfile=C:\packages\Eclipse3.1\eclipse\workspace\.metadata\.log
    osgi.manifest.cache=c:\packages\Eclipse3.1\eclipse\configuration\org.eclipse.osgi\manifests
    osgi.nl=en_US
    osgi.os=win32
    osgi.splashLocation=C:\packages\Workshop_for_Struts_3.0_471\Workshop\splash.bmp
    osgi.splashPath=platform:/base/plugins/org.eclipse.platform
    osgi.syspath=c:\packages\Eclipse3.1\eclipse\plugins
    osgi.ws=win32
    path.separator=;
    sun.arch.data.model=32
    sun.boot.class.path=C:\Program Files\Java\j2re1.4.2_04\lib\rt.jar;C:\Program Files\Java\j2re1.4.2_04\lib\i18n.jar;C:\Program Files\Java\j2re1.4.2_04\lib\sunrsasign.jar;C:\Program Files\Java\j2re1.4.2_04\lib\jsse.jar;C:\Program Files\Java\j2re1.4.2_04\lib\jce.jar;C:\Program Files\Java\j2re1.4.2_04\lib\charsets.jar;C:\Program Files\Java\j2re1.4.2_04\classes
    sun.boot.library.path=C:\Program Files\Java\j2re1.4.2_04\bin
    sun.cpu.endian=little
    sun.cpu.isalist=pentium i486 i386
    sun.io.unicode.encoding=UnicodeLittle
    sun.java2d.fontpath=
    sun.os.patch.level=Service Pack 1
    user.country=US
    user.dir=C:\packages\Eclipse3.1\eclipse
    user.home=C:\Documents and Settings\charris
    user.language=en
    user.name=CHarris
    user.timezone=America/Los_Angeles
    user.variant=
    vendor=Apache Software Foundation
    vendor-url=http://xml.apache.org/xalan-j
    version=2.4.1
    *** Features:
    com.m7.nitrox (3.0.0) "Workshop"
    org.eclipse.emf (2.1.1) "Eclipse Modeling Framework (EMF)"
    org.eclipse.emf.doc (2.1.1) "Eclipse Modeling Framework (EMF) Programmers Guide"
    org.eclipse.emf.ecore.sdo (2.1.1) "EMF Service Data Objects (SDO)"
    org.eclipse.emf.ecore.sdo.doc (2.1.1) "EMF Service Data Objects (SDO) Programmers Guide"
    org.eclipse.emf.ecore.sdo.source (2.1.1) "EMF Service Data Objects (SDO) Source"
    org.eclipse.emf.examples (2.1.0) "Eclipse Modeling Framework (EMF) Examples"
    org.eclipse.emf.source (2.1.1) "Eclipse Modeling Framework (EMF) Source"
    org.eclipse.gef (3.1.1) "Graphical Editing Framework"
    org.eclipse.gef.examples (3.1.1) "GEF Examples"
    org.eclipse.gef.sdk (3.1.1) "Graphical Editing Framework Developer Resources"
    org.eclipse.gef.source (3.1.1) "Graphical Editing Framework Developer Resources"
    org.eclipse.jdt (3.1.1) "Eclipse Java Development Tools"
    org.eclipse.jdt.source (3.1.1) "Eclipse Java Development Tools SDK"
    org.eclipse.jem (1.1.0.1) "Java EMF Model"
    org.eclipse.jem.sdk (1.1.0.1) "Java EMF Model SDK"
    org.eclipse.jem.source (1.1.0.1) "Java EMF Model Source"
    org.eclipse.jst (0.7.1) "J2EE Standard Tools"
    org.eclipse.jst.sdk (0.7.1) "J2EE Standard Tools SDK"
    org.eclipse.pde (3.1.1) "Eclipse Plug-in Development Environment"
    org.eclipse.pde.source (3.1.1) "Eclipse Plug-in Development Environment Developer Resources"
    org.eclipse.platform (3.1.1) "Eclipse Platform"
    org.eclipse.platform.source (3.1.1) "Eclipse Platform Plug-in Developer Resources"
    org.eclipse.rcp (3.1.1) "Eclipse RCP"
    org.eclipse.rcp.source (3.1.1) "Eclipse RCP Plug-in Developer Resources"
    org.eclipse.sdk (3.1.1) "Eclipse Project SDK"
    org.eclipse.sdk.examples (3.0.1) "Eclipse SDK Examples"
    org.eclipse.team.extras (3.0.0) "Eclipse FTP and WebDAV Support"
    org.eclipse.ve (1.1.0.1) "Visual Editor"
    org.eclipse.ve.sdk (1.1.0.1) "Visual Editor SDK"
    org.eclipse.ve.source (1.1.0.1) "Visual Editor Source"
    org.eclipse.wst (0.7.1) "Web Standard Tools"
    org.eclipse.wst.sdk (0.7.1) "Web Standard Tools SDK"
    org.eclipse.xsd (2.1.1) "XML Schema Infoset Model (XSD)"
    org.eclipse.xsd.doc (2.1.1) "XML Schema Infoset Model (XSD) Programmers Guide"
    org.eclipse.xsd.source (2.1.1) "XML Schema Infoset Model (XSD) Source"
    *** Plug-in Registry:
    com.ibm.etools.emf.event (3.0.0.1) "Event Model" [Resolved]
    com.m7.nitrox (3.0.0) "Workshop" [Active]
    com.m7.nitrox.database (3.0.0) "Workshop Database" [Resolved]
    com.m7.nitrox.debugger (3.0.0) "Workshop JSP Debugger" [Resolved]
    com.m7.nitrox.eclipse3.0 (3.0.0) "Workshop Eclipse 3.0" [Resolved]
    com.m7.nitrox.ejb3 (3.0.0) "Workshop EJB3 Persistence" [Resolved]
    com.m7.nitrox.hibernate (3.0.0) "Workshop Hibernate" [Resolved]
    com.m7.nitrox.jsf (3.0.0) "Workshop JSF" [Resolved]
    com.m7.nitrox.jsp (3.0.0) "Workshop JSP" [Resolved]
    com.m7.nitrox.jstl (3.0.0) "Workshop JSTL" [Resolved]
    com.m7.nitrox.jwebapp (3.0.0) "Workshop Java Web Application" [Resolved]
    com.m7.nitrox.orm (3.0.0) "Workshop ORM" [Resolved]
    com.m7.nitrox.struts (3.0.0) "Workshop Struts" [Resolved]
    org.apache.ant (1.6.5) "Apache Ant" [Active]
    org.apache.axis (1.2.1) "Axis121 Plug-in" [Resolved]
    org.apache.lucene (1.4.3) "Apache Lucene" [Resolved]
    org.apache.wsil4j (1.0.0) "Apache WSIL4J 1.0" [Resolved]
    org.apache.xerces (2.7.0) "Xerces 2.7.0" [Resolved]
    org.eclipse.ant.core (3.1.1) "Ant Build Tool Core" [Resolved]
    org.eclipse.ant.ui (3.1.1) "Ant UI" [Active]
    org.eclipse.compare (3.1.1) "Compare Support" [Resolved]
    org.eclipse.compare.examples (3.0.0) "Compare Example" [Resolved]
    org.eclipse.compare.examples.xml (3.0.0) "XML Compare Support" [Resolved]
    org.eclipse.core.boot (3.1.0) "Core Boot" [Resolved]
    org.eclipse.core.commands (3.1.0) "Commands" [Active]
    org.eclipse.core.expressions (3.1.0) "Expression Language" [Active]
    org.eclipse.core.filebuffers (3.1.0) "File Buffers" [Active]
    org.eclipse.core.resources (3.1.0) "Core Resource Management" [Active]
    org.eclipse.core.resources.compatibility (3.1.0) "Core Resource Management Compatibility Fragment" [Resolved]
    org.eclipse.core.resources.win32 (3.1.0) "Core Resource Management Win32 Fragment" [Resolved]
    org.eclipse.core.runtime (3.1.1) "Core Runtime" [Active]
    org.eclipse.core.runtime.compatibility (3.1.0) "Core Runtime Plug-in Compatibility" [Active]
    org.eclipse.core.variables (3.1.0) "Core Variables" [Resolved]
    org.eclipse.debug.core (3.1.0) "Debug Core" [Active]
    org.eclipse.debug.ui (3.1.1) "Debug UI" [Active]
    org.eclipse.draw2d (3.1.1) "Draw2d" [Resolved]
    org.eclipse.draw2d.doc.isv (3.1.1) "Draw2D Documentation" [Resolved]
    org.eclipse.emf (2.1.1) "Eclipse Modeling Framework (EMF)" [Resolved]
    org.eclipse.emf.activities (2.1.0) "EMF Activities" [Resolved]
    org.eclipse.emf.ant (2.1.0) "EMF Ant Tasks" [Resolved]
    org.eclipse.emf.codegen (2.1.0) "EMF Template Code Generator" [Resolved]
    org.eclipse.emf.codegen.ecore (2.1.0) "EMF Ecore Code Generation" [Resolved]
    org.eclipse.emf.codegen.ecore.ui (2.1.0) "EMF Ecore Code Generation UI" [Resolved]
    org.eclipse.emf.codegen.ui (2.1.0) "EMF Template Code Generator UI" [Resolved]
    org.eclipse.emf.common (2.1.0) "EMF Common" [Active]
    org.eclipse.emf.common.ui (2.1.0) "EMF Common UI" [Resolved]
    org.eclipse.emf.commonj.sdo (2.1.0) "CommonJ SDO" [Resolved]
    org.eclipse.emf.doc (2.1.1) "Eclipse Modeling Framework (EMF) Programmers Guide" [Resolved]
    org.eclipse.emf.ecore (2.1.0) "EMF Ecore" [Active]
    org.eclipse.emf.ecore.change (2.1.0) "EMF Ecore Change Model" [Resolved]
    org.eclipse.emf.ecore.change.edit (2.1.0) "EMF Ecore Change Edit Support" [Resolved]
    org.eclipse.emf.ecore.edit (2.1.1) "EMF Ecore Edit Support" [Resolved]
    org.eclipse.emf.ecore.editor (2.1.0) "Sample Ecore Editor" [Resolved]
    org.eclipse.emf.ecore.sdo (2.1.1) "EMF Service Data Objects (SDO)" [Resolved]
    org.eclipse.emf.ecore.sdo.doc (2.1.1) "EMF Service Data Objects (SDO) Programmers Guide" [Resolved]
    org.eclipse.emf.ecore.sdo.edit (2.1.0) "EMF Service Data Objects (SDO) Edit Support" [Resolved]
    org.eclipse.emf.ecore.sdo.editor (2.1.0) "EMF Service Data Objects (SDO) Editor" [Resolved]
    org.eclipse.emf.ecore.sdo.source (2.1.1) "EMF Service Data Objects (SDO) Source" [Resolved]
    org.eclipse.emf.ecore.xmi (2.1.0) "EMF XMI" [Active]
    org.eclipse.emf.edit (2.1.1) "EMF Edit" [Resolved]
    org.eclipse.emf.edit.ui (2.1.0) "EMF Edit UI" [Resolved]
    org.eclipse.emf.examples (2.1.0) "Eclipse Modeling Framework (EMF) Examples" [Resolved]
    org.eclipse.emf.importer (2.1.0) "EMF Model Import Support" [Resolved]
    org.eclipse.emf.importer.ecore (2.1.0) "EMF Ecore Importer" [Resolved]
    org.eclipse.emf.importer.java (2.1.1) "EMF Annotated Java Importer" [Resolved]
    org.eclipse.emf.importer.rose (2.1.1) "EMF Rose Importer" [Resolved]
    org.eclipse.emf.java (2.1.0) "EMF Java" [Resolved]
    org.eclipse.emf.java.edit (2.1.0) "EMF Java Edit" [Resolved]
    org.eclipse.emf.java.editor (2.1.0) "EMF Java Editor" [Resolved]
    org.eclipse.emf.mapping (2.1.0) "EMF Mapping" [Resolved]
    org.eclipse.emf.mapping.ecore2ecore (2.1.0) "Ecore to Ecore Mapping" [Resolved]
    org.eclipse.emf.mapping.ecore2ecore.editor (2.1.0) "Ecore to Ecore Mapping Editor" [Resolved]
    org.eclipse.emf.mapping.ecore2xml (2.1.0) "Ecore to XML Mapping" [Resolved]
    org.eclipse.emf.mapping.ecore2xml.ui (2.1.1) "Ecore to XML Mapping UI" [Resolved]
    org.eclipse.emf.mapping.ui (2.1.0) "EMF Mapping UI" [Resolved]
    org.eclipse.emf.mapping.xsd2ecore (2.1.0) "XSD to Ecore Mapping" [Resolved]
    org.eclipse.emf.mapping.xsd2ecore.editor (2.1.0) "XSD to Ecore Mapping Editor" [Resolved]
    org.eclipse.emf.source (2.1.1) "Eclipse Modeling Framework (EMF) Source" [Resolved]
    org.eclipse.gef (3.1.1) "Graphical Editing Framework" [Resolved]
    org.eclipse.gef.doc.isv (3.1.1) "Graphical Editing Framework Documentation" [Resolved]
    org.eclipse.gef.examples.flow (3.1.1) "GEF Flow Editor Example" [Resolved]
    org.eclipse.gef.examples.logic (3.1.1) "GEF Logic Editor Example" [Resolved]
    org.eclipse.gef.examples.shapes (3.1.1) "GEF Shape Editor Example" [Resolved]
    org.eclipse.gef.examples.source (3.1.1) "GEF Examples" [Resolved]
    org.eclipse.gef.examples.text (3.1.1) "GEF Text Editor Example" [Resolved]
    org.eclipse.gef.source (3.1.1) "Graphical Editing Framework Developer Resources" [Resolved]
    org.eclipse.help (3.1.0) "Help System Core" [Active]
    org.eclipse.help.appserver (3.1.0) "Help Application Server" [Resolved]
    org.eclipse.help.base (3.1.0) "Help System Base" [Resolved]
    org.eclipse.help.examples.ex1 (3.0.0) "Online Help Sample" [Resolved]
    org.eclipse.help.ui (3.1.1) "Help System UI" [Resolved]
    org.eclipse.help.webapp (3.1.0) "Help System Webapp" [Resolved]
    org.eclipse.jdt (3.1.0) "Eclipse Java Development Tools" [Resolved]
    org.eclipse.jdt.core (3.1.1) "Java Development Tools Core" [Active]
    org.eclipse.jdt.debug (3.1.1) "JDI Debug Model" [Active]
    org.eclipse.jdt.debug.ui (3.1.1) "JDI Debug UI" [Active]
    org.eclipse.jdt.doc.isv (3.1.1) "Eclipse JDT Plug-in Developer Guide" [Resolved]
    org.eclipse.jdt.doc.user (3.1.1) "Eclipse Java Development User Guide" [Resolved]
    org.eclipse.jdt.junit (3.1.1) "Java Development Tools JUnit support" [Resolved]
    org.eclipse.jdt.junit.runtime (3.1.0) "Java Development Tools JUnit runtime support" [Resolved]
    org.eclipse.jdt.launching (3.1.0) "Java Development Tools Launching Support" [Active]
    org.eclipse.jdt.source (3.1.1) "Eclipse Java Development Tools SDK" [Resolved]
    org.eclipse.jdt.ui (3.1.1) "Java Development Tools UI" [Active]
    org.eclipse.jdt.ui.examples.projects (3.0.1) "Java Development Tools Example Projects" [Resolved]
    org.eclipse.jem (1.1.0.1) "Java EMF Model" [Resolved]
    org.eclipse.jem.beaninfo (1.1.0.1) "Java EMF Model BeanInfo (Introspection) Support" [Resolved]
    org.eclipse.jem.proxy (1.1.0.1) "Java EMF Model Proxy Support" [Resolved]
    org.eclipse.jem.sdk (1.1.0) "Java EMF Model SDK" [Resolved]
    org.eclipse.jem.source (1.1.0.1) "Java EMF Model Source" [Resolved]
    org.eclipse.jem.ui (1.1.0.1) "Java EMF Model UI" [Resolved]
    org.eclipse.jem.util (1.1.0) "Java EMF Model Utilities" [Installed]
    org.eclipse.jem.util (1.1.0.1) "Java EMF Model Utilities" [Active]
    org.eclipse.jem.workbench (1.1.0.1) "Java EMF Model Workbench Support" [Resolved]
    org.eclipse.jface (3.1.1) "JFace" [Active]
    org.eclipse.jface.text (3.1.1) "JFace Text" [Active]
    org.eclipse.jst (0.7.0) "J2EE Standard Tools" [Resolved]
    org.eclipse.jst.common.annotations.controller (0.7.1) "Annotation Controller Plug-in" [Resolved]
    org.eclipse.jst.common.annotations.core (0.7.0) "Annotation Core Plug-in" [Resolved]
    org.eclipse.jst.common.annotations.ui (0.7.0) "Ui Plug-in" [Resolved]
    org.eclipse.jst.common.frameworks (0.7.0) "Integration Plug-in" [Resolved]
    org.eclipse.jst.common.navigator.java (0.7.1) "Navigator Plug-in" [Resolved]
    org.eclipse.jst.ejb.ui (0.7.0) "WTP EJB UI Plug-in" [Resolved]
    org.eclipse.jst.j2ee (0.7.1) "J2EE Component" [Resolved]
    org.eclipse.jst.j2ee.core (0.7.1) "J2EE Core Component" [Resolved]
    org.eclipse.jst.j2ee.ejb (0.7.0) "EJB component Plug-in" [Resolved]
    org.eclipse.jst.j2ee.ejb.annotation.model (0.7.0) "EJB Annotation Model Plug-in" [Resolved]
    org.eclipse.jst.j2ee.ejb.annotations.emitter (0.7.0) "EJB Emitter Plug-in" [Resolved]
    org.eclipse.jst.j2ee.ejb.annotations.ui (0.7.1) "EJB Annotations Ui Plug-in" [Resolved]
    org.eclipse.jst.j2ee.ejb.annotations.xdoclet (0.7.1) "Xdoclet Annotations Plug-in" [Resolved]
    org.eclipse.jst.j2ee.jca (0.7.0) "JCA Plug-in" [Resolved]
    org.eclipse.jst.j2ee.jca.ui (0.7.0) "WTP JCA UI Plug-in" [Resolved]
    org.eclipse.jst.j2ee.navigator.ui (0.7.0) "J2EE Extensions to Common Navigator" [Resolved]
    org.eclipse.jst.j2ee.ui (0.7.1) "WTP J2EE UI Plug-in" [Resolved]
    org.eclipse.jst.j2ee.web (0.7.1) "Web Plug-in" [Resolved]
    org.eclipse.jst.j2ee.webservice (0.7.0) "Web Service Plug-in" [Resolved]
    org.eclipse.jst.j2ee.webservices.ui (0.7.0) "WTP Webservice UI Plug-in" [Resolved]
    org.eclipse.jst.jsp.core (0.7.0) "Structured Source JSP Model" [Installed]
    org.eclipse.jst.jsp.core (0.7.1) "Structured Source JSP Model" [Active]
    org.eclipse.jst.jsp.ui (0.7.0) "SSE JSP Source Editor" [Installed]
    org.eclipse.jst.jsp.ui (0.7.1) "SSE JSP Source Editor" [Active]
    org.eclipse.jst.server.core (0.7.0) "Java Server Support" [Resolved]
    org.eclipse.jst.server.generic.core (0.7.0) "Generic Server Plugin" [Resolved]
    org.eclipse.jst.server.generic.serverdefinitions (0.7.0) "Generic server example definitions" [Resolved]
    org.eclipse.jst.server.generic.ui (0.7.0) "Generic Server Plugin UI" [Resolved]
    org.eclipse.jst.server.geronimo.core (0.7.0) "Geronimo server support" [Resolved]
    org.eclipse.jst.server.geronimo.ui (0.7.0) "Geronimo server UI support" [Resolved]
    org.eclipse.jst.server.tomcat.core (0.7.0) "Apache Tomcat Support" [Resolved]
    org.eclipse.jst.server.tomcat.ui (0.7.0) "Apache Tomcat UI Support" [Resolved]
    org.eclipse.jst.server.ui (0.7.0) "Java Server UI Support" [Resolved]
    org.eclipse.jst.server.websphere.core (0.7.0) "WebSphere Generic Server Definition Core Plug-in" [Resolved]
    org.eclipse.jst.servlet.ui (0.7.1) "WTP Servlet UI Plug-in" [Resolved]
    org.eclipse.jst.source (0.7.1) "J2EE Standard Tools SDK" [Resolved]
    org.eclipse.jst.ws (0.7.1) "Web Services" [Resolved]
    org.eclipse.jst.ws.axis.consumption.core (0.7.0) "Web service Axis Consumption Core" [Resolved]
    org.eclipse.jst.ws.axis.consumption.ui (0.7.1) "Webservice Axis Consumption UI" [Resolved]
    org.eclipse.jst.ws.axis.creation.ui (0.7.0) "Webservice Axis Creation UI" [Resolved]
    org.eclipse.jst.ws.consumption (0.7.0) "Web Services Consumption" [Resolved]
    org.eclipse.jst.ws.consumption.ui (0.7.1) "Web Services Consumption Graphical User Interface" [Resolved]
    org.eclipse.jst.ws.creation.ejb.ui (0.7.0) "Web Services Creation EJB Graphical User Interface" [Resolved]
    org.eclipse.jst.ws.creation.ui (0.7.1) "Web Services Creation Graphical User Interface" [Resolved]
    org.eclipse.jst.ws.uddiregistry (0.7.0) "Web Services Universal Description Discovery and Integration Registry" [Resolved]
    org.eclipse.jst.ws.ui (0.7.1) "Web Services Graphical User Interface" [Resolved]
    org.eclipse.ltk.core.refactoring (3.1.0) "Refactoring Core" [Active]
    org.eclipse.ltk.ui.refactoring (3.1.1) "Refactoring UI" [Active]
    org.eclipse.osgi.services (3.1.1) "OSGi Release 3 Services" [Resolved]
    org.eclipse.osgi.util (3.1.1) "OSGi R3 Utility Classes" [Resolved]
    org.eclipse.pde (3.1.0) "Eclipse Plug-in Development Environment" [Resolved]
    org.eclipse.pde.build (3.1.0) "Plug-in Development Environment Build Support" [Resolved]
    org.eclipse.pde.core (3.1.1) "Plug-in Development Core" [Resolved]
    org.eclipse.pde.doc.user (3.1.1) "Eclipse Plug-in Development User Guide" [Resolved]
    org.eclipse.pde.junit.runtime (3.1.0) "PDE JUnit Plug-in Test" [Resolved]
    org.eclipse.pde.runtime (3.1.1) "Plug-in Development Environment Runtime" [Resolved]
    org.eclipse.pde.source (3.1.1) "Eclipse Plug-in Development Environment Developer Resources" [Resolved]
    org.eclipse.pde.ui (3.1.1) "Plug-in Development UI" [Resolved]
    org.eclipse.platform (3.1.1) "Eclipse Platform" [Resolved]
    org.eclipse.platform.doc.isv (3.1.1) "Eclipse Platform Plug-in Developer Guide" [Resolved]
    org.eclipse.platform.doc.user (3.1.1) "Eclipse Workbench User Guide" [Resolved]
    org.eclipse.platform.source (3.1.1) "Eclipse Platform Plug-in Developer Resources" [Resolved]
    org.eclipse.platform.so

    What kind of projects are they (Struts/JSF/Hibernate)? Does the working project differ in any way with other two apps?
    What exactly is not working? Are they recognized by workshop as Struts/JSF/Hibernate app?
    Please send the .log to [email protected]

  • Fox news slideshows are not working in Vista Home 64 bit.

    All fox news slideshows are not working since firefox 3.6 started. I can't get them to work in Internet explorer either.
    == URL of affected sites ==
    http://

    Error: $.ad is undefined
    Source File: http://www.foxnews.com/static/all/js/slideshows-pack.js
    Line: 850
    // Slideshows - updated: 04/30/2010
    // Dependencies: jQuery, jfoxCarousel plugin
    (function($){
    function SlideShows() {
    this._data = {}; // slideshow data
    this._info = {}; // current slideshow info
    this._relatedMedia = {}; // related media data
    this._trackData = false;
    this.initialized = false;
    this.toolTipId = "carousel-tooltip";
    this.defaultTrackFrequency = 1; // tracker trigger
    this._preloaderSrc = "/static/all/img/slideshow/slideshow-preloader.gif";
    this._timer = { // timers
    main: { fadeIn:800 },
    carousel: { fadeIn:300 },
    overlay: { onLast:10000,fadeIn:300,fadeOut:300 }
    this.currentFocus = 1; // current item in focus
    this.holderObj = {}; // holder for elements
    this.hashObj = {}; // hash location holder
    this.imgPreloadObj = {}; // holder for preloaded images
    // carousel object controllers
    this.carouselControlObj = {};
    this.overlayControlObj = {};
    this.trigger = { // listeners
    main: false,
    carousel: false,
    overlay: false
    this.overlayTimeout = false; // overlay timeout holder
    SlideShows.prototype = {
    init: function(config) {
    for (i in config) { this['_'+i] = config[i]; }
    this.main.root = this.carousel.root = this.overlay.root = this;
    this.hashObj = this.helper.getHash();
    if (typeof $.fn.jfoxCarousel<u>'undefined') {
    showToConsole("[init] Error: carousel plugin not found!");
    if (this._trackData) { // set tracking data
    sTracker.set(this._trackData);
    sTracker.track("pageLoad"); // page load tracker
    this.preload();
    this.setHolders();
    this.initialized = true;
    preload: function() {
    var preloadImg = new Image();
    preloadImg.src = this.preloadSrc;
    setHolders: function() {
    var SH = this;
    var slideshowElm = $("#slideshow");
    this.holderObj = {
    doc: $(document),
    body: $("body"),
    intro: $("#section-intro"),
    main: slideshowElm.find("#main-img"),
    mainHolder: slideshowElm.find(".slideshow-placeholder"),
    mainControl: slideshowElm.find(".slideshow-controller"),
    description: slideshowElm.find(".slideshow-desc"),
    relatedMedia: slideshowElm.find(".slideshow-related"),
    carousel: slideshowElm.find(".slideshow-feature .slideshow")
    this.holderObj.intro.each(function(){
    var intro = $(this);
    intro.find("h1:first").html(SH._info.title);
    intro.find("p:first").html(SH._info.dek);
    if (this.holderObj.main.size()>0) {
    this.main.properties.minHeight = this.holderObj.mainHolder.innerHeight(); // get set height as "min-height"
    this.main.build();
    if (this.holderObj.carousel.size()>0) {
    this.carousel.build();
    $(document).ready(function(){ // wait for page load for the overlay
    SH.holderObj.overlay = $("#slideshow-overlay");
    var set = (SH.holderObj.overlay.size()>0) ? (typeof $.fn.jfoxCarousel!=='undefined') ? SH.overlay.set() : false : false;
    SH.setDocReadyListeners();
    this.setListeners();
    setListeners: function() {
    var SH = this;
    var control = this.holderObj.mainControl;
    // main image controls
    control.find(".prev").click(function(){
    SH.main.prev();
    return false;
    control.find(".next").click(function(){
    SH.main.next();
    return false;
    if (typeof touchEventListener!=="undefined") {
    var listenerConfig = {
    elm: SH.holderObj.mainHolder,
    moveSensitivity: 15,
    eventsCallback: {
    touchmoveMoveOnce: function(direction,moveProperties,rawEvent) {
    // move callback - sensitivity
    var directions = direction.join("|");
    if (directions.indexOf("left")>-1) {
    control.find(".next").trigger("click");
    if (directions.indexOf("right")>-1) {
    control.find(".prev").trigger("click");
    touchEventListener.append(listenerConfig);
    setDocReadyListeners: function() {
    var SH = this;
    // browse slideshow overlay
    $(document).ready(function(){
    $("#section-intro .additional-slides a").click(function() {
    SH.overlay.show();
    return false;
    SH.holderObj.overlay.find(".close a").click(function(){
    SH.overlay.hide();
    return false;
    replaySlideshow: function() {
    var SH = this;
    //TODO: build replay
    this.overlay.hide(); // hide overlay
    this.main.build(this.currentFocus = 1); // reset focus
    sTracker.track("replaySlideshow");
    // main image holder
    SlideShows.prototype.main = {
    properties: {},
    build: function(slide,origin) {
    var SH = this;
    var root = this.root;
    if (root.trigger.main) { return false; }
    root.trigger.main = true;
    slide = slide || false;
    origin = origin || "main";
    var control = root.holderObj.mainControl;
    var data = root._data;
    var initData = false;
    var desc = [];
    var helper = root.helper;
    if (slide) {
    if (slide 0) { desc.push('Source: ' + data.items[slide].source + ''); }
    root.holderObj.description.html(desc.join(""));
    // load related media
    if (root._relatedMedia.items) {
    var rmItems = root._relatedMedia.items;
    if (rmItems.length>0) {
    var rel = [];
    rel.push('Related Articles');
    for (var x=0; x 0) {
    root.currentFocus--;
    SH.build(root.currentFocus);
    sTracker.track("clickPrevMain"); // tracker
    if (!SH.isLast() && root.overlayTimeout) { clearTimeout(root.overlayTimeout); } // clear overlay timeout
    isLast: function() {
    var root = this.root;
    return (root.currentFocus+1 > root._data.items.length) ? true : false;
    // carousel
    SlideShows.prototype.carousel = {
    build: function() {
    var SH = this;
    var root = this.root;
    var carousel = root.holderObj.carousel;
    var data = root._data;
    var list = [];
    for (var x=0;x 0) {
    var li = $(".slideshow > ul",carousel).children();
    li.each(function(i){
    var el = $(this);
    var setClass = (i == eventObj.target-1) ? el.addClass("active") : el.removeClass("active");
    controlsCallback: function(control) { // callback to set up controls
    root.carouselControlObj = control;
    carousel.find(".prev").click(function(){ // previous link
    control.stopAutoScroll();
    control.slide('prev');
    sTracker.track("clickPrevCarousel"); // tracker
    return false;
    carousel.find(".next").click(function(){ // next link
    // show overlay on last carousel link
    //var lastLink = (!currentEventObj) ? false : (currentEventObj.batch.current+1 > currentEventObj.batch.max) ? $(document).ready(function(){ root.overlay.show(false,true); }) : false;
    control.stopAutoScroll();
    control.slide('next');
    sTracker.track("clickNextCarousel"); // tracker
    return false;
    carousel.jfoxCarousel(config);
    if (typeof touchEventListener!=="undefined") {
    var listenerConfig = {
    elm: carousel,
    moveSensitivity: 15,
    eventsCallback: {
    touchmoveMoveOnce: function(direction,moveProperties,rawEvent) {
    // move callback - sensitivity
    var directions = direction.join("|");
    if (directions.indexOf("left")>-1) {
    carousel.find(".next").click();
    if (directions.indexOf("right")>-1) {
    carousel.find(".prev").click();
    touchEventListener.append(listenerConfig);
    // overlay
    SlideShows.prototype.overlay = {
    set: function() {
    var root = this.root;
    var overlay = root.holderObj.overlay;
    overlay.find(".slideshow-feature").each(function(){
    var carousel = $(this);
    var allItems = carousel.find(".slideshow ul").children().children();
    allItems.each(function(){
    var div = $(this);
    var link = div.find("a:first").attr("href");
    div.hover(function(){
    div.css("cursor","pointer");
    },function(){
    div.css("cursor","");
    }).unbind("click").click(function(){
    window.location.replace(window.location.hostname + link);
    var config = {
    auto: { set:false,speed:3000 }, // auto scroll
    slide: "horizontal", // horizontal or vertical
    scroll: 3, // number of items to scroll per event
    show: 3, // items shown
    speed: "slow", // scroll speed
    rotate: false, // rotate back to star if end
    //focus: { item:0,animate:false }, // focus to target item on load
    eventCallback: function(eventObj) {
    if (eventObj.batch.current</u>1) {
    carousel.find(".prev").addClass("inactive");
    } else {
    carousel.find(".prev").removeClass("inactive");
    if (eventObj.batch.current<u>eventObj.batch.max) {
    carousel.find(".next").addClass("inactive");
    } else {
    carousel.find(".next").removeClass("inactive");
    controlsCallback: function(control) { // callback to set up controls
    root.overlayControlObj = control;
    carousel.find(".prev").click(function(){ // previous link
    control.stopAutoScroll();
    control.slide('prev');
    sTracker.track("clickPrevOverlay"); // tracker
    return false;
    carousel.find(".next").click(function(){ // next link
    control.stopAutoScroll();
    control.slide('next');
    sTracker.track("clickNextOverlay"); // tracker
    return false;
    carousel.jfoxCarousel(config);
    if (typeof touchEventListener!=="undefined") {
    var listenerConfig = {
    elm: carousel,
    moveSensitivity: 15,
    eventsCallback: {
    touchmoveMoveOnce: function(direction,moveProperties,rawEvent) {
    // move callback - sensitivity
    var directions = direction.join("|");
    if (directions.indexOf("left")>-1) {
    carousel.find(".next").click();
    if (directions.indexOf("right")>-1) {
    carousel.find(".prev").click();
    touchEventListener.append(listenerConfig);
    show: function(delay,isReplay) {
    isReplay = isReplay || false;
    delay = delay || false;
    var root = this.root;
    if (root.trigger.overlay) { return false; } // if already open
    var SH = this;
    delay = (isNaN(delay)) ? 0 : delay; // delayed show
    root.overlayTimeout = setTimeout(function(){
    SH.setReplay(isReplay);
    if (root.main.isLast()) {
    root.holderObj.overlay.fadeIn(root._timer.overlay.fadeIn,function(){ root.trigger.overlay = true; });
    sTracker.track("showOverlay"); // tracker
    else {
    root.holderObj.overlay.fadeIn(function(){ root.trigger.overlay = true; });
    },delay);
    hide: function(delay) {
    delay = delay || false;
    var root = this.root;
    if (!root.trigger.overlay) { return false; } // if already closed
    delay = (isNaN(delay)) ? 0 : delay; // delayed hide
    setTimeout(function(){
    root.holderObj.overlay.fadeOut(root._timer.overlay.fadeOut,function(){ root.trigger.overlay = false; });
    sTracker.track("hideOverlay"); // tracker
    },delay);
    setReplay: function(isReplay) {
    var root = this.root;
    var overlay = root.holderObj.overlay;
    var firstList = overlay.find(".slideshow-feature .slideshow ul").children().filter(":first");
    var divs = firstList.children();
    var replayDiv = divs.filter(":first");
    var cloneDiv = replayDiv.next();
    function configInfo(elm) {
    var currentSS = root._data.items;
    var info = root._info;
    var count = currentSS.length;
    var first = currentSS[0];
    var slideshowTitle = (info.title.length > 16) ? info.title.substring(0,16) + "..." : info.title;
    var slideshowImg = first.media.tm;
    var slideshowDate = info.title.date;
    function replay() {
    root.replaySlideshow();
    var items = elm.children();
    items.filter("p.photo-count").html(count + " image" + [[count>1) ? "s" : ""]];
    items.filter("p.date").html(slideshowDate);
    items.filter("p.photo").each(function(){
    var item = $(this);
    item.find("a").attr({ href: "#", title: slideshowTitle });
    item.find("img").attr({ alt: slideshowTitle, src: slideshowImg });
    items.filter("h4").each(function(){
    var item = $(this);
    item.find("a").attr("href","#").html(slideshowTitle);
    items.find("a").unbind("click").click(function(){
    replay();
    return false;
    elm.hover(function(){
    elm.css("cursor","pointer");
    },function(){
    elm.css("cursor","");
    }).unbind("click").click(function(){
    replay();
    return false;
    if (replayDiv.children().size()</u>0) {
    replayDiv.html(cloneDiv.html());
    configInfo(replayDiv);
    if (isReplay) {
    replayDiv.addClass("active").show();
    cloneDiv.hide();
    } else {
    replayDiv.hide();
    cloneDiv.show();
    SlideShows.prototype.helper = {
    toNum: function(item) {
    item = (isNaN(item)) ? parseInt(item.replace(/[a-zA-z]/gi,""),10) : item;
    return isNaN(item)?0:item;
    imgLoad: function(obj,fn) {
    var SH = this;
    obj.alt = obj.alt || "";
    if (obj.preload && !$.browser.opera) { // opera =/= img.onload
    if (obj.mainHolder) { obj.mainHolder.css({ background:"url("+obj.preloaderSrc+") no-repeat center" }); }
    var img = new Image();
    obj.holder.css({ display:"inline", opacity:"0" });
    img.onload = function() {
    if (obj.outer) {
    if (img.height > SH.toNum(obj.outer.minHeight)) { obj.outer.holder.css("height","auto"); }
    else { obj.outer.holder.css("height",obj.outer.minHeight); }
    obj.holder.attr("src",obj.src).animate({ opacity:"1"},obj.speed,"linear",function(){
    if (obj.mainHolder) { obj.mainHolder.css({ backgroundImage:"none" }); }
    $(this).attr("alt",obj.alt);
    fn();
    img.src = obj.src;
    } else {
    if (obj.mainHolder) { obj.mainHolder.css({ backgroundImage:"none" }); }
    obj.holder.css({ display:"inline", opacity:"0" });
    obj.holder.attr({
    src: obj.src,
    alt: obj.alt
    }).animate({ opacity:"1"},obj.speed,"linear",function(){ fn(); });
    getHash: function() {
    var hash = (window.location.hash).substr(1);
    if (hash) {
    var pairs = hash.split('&');
    var valuePair = {};
    for (var x=0;x 1 && callback && count%freq<u>0) {
    callback(data);
    var sTracker = new Trackers(); // private
    function showToConsole(str) {
    if (typeof window.console</u>'object') { console.log(str); }
    var slideShowsPack = window.slideShowsPack = new SlideShows();
    })(jQuery);
    // Tracking Data Here
    var trackData = {
    ads: {
    buildSlide: {
    frequency: 1,
    callback: function() {
    $(document).ready(function(){
    if (typeof $.ad.dc.load!=="undefined") {
    $.ad.dc.load();
    omni: {
    buildSlide: {
    frequency: 1,
    callback: function(data) {
    data = data || false;
    if (!data) { return false; }
    if (!data.slideNumber) { return false; }
    if (typeof $.ad.omni.load!=="undefined") {
    $.ad.omni.load({ "slide": data.slideNumber });
    var initializeSlideShow = window.initializeSlideshow = function() {
    if (typeof slideshowData!=="undefined") {
    if (!slideShowsPack.initialized) {
    slideShowsPack.init({
    data: slideshowData,
    info: slideshowInfo,
    relatedMedia: relatedsData,
    trackData: trackData
    } else {
    if (typeof window.console==='object') { console.log("[error] No Data found for: slideshowData"); }
    This the line highlighted:
    if (typeof $.ad.dc.load!=="undefined") {

  • "gdmessage" does not work in 7.1.3

    It seems that the "gdmessage" does not work properly in version 7.1.3.
    I attach a simple example consisting of a GUI with two buttons:
    - Quit
    - gdmessage
    The callback for the "gdmessage" button execute the following command:
    gdmessage(T,"MainWin",1);
    This will get trapped by debugger on line 111 of the
    $ISIHOME/solaris_mx_71.3/xmath/modules/gui/gdmessage.msf
    with the error message "Cannot evaluate guiunmanage with this 1x1 String."
    Note that the same example works fine in 6.1.3 and 7.0.1.
    Any hints on why this does not work in 7.1.3 or any example that shows it
    works in this version is appreciated.
    Thanks
    Attachments:
    ex.msc ‏1 KB
    Ex ‏1 KB

    The files that you are using are based on older gui commands. In MATRIXx 6.0 a transition was made to a newer set of commands that start with ui. The switch was made to make it easier to move programs between Unix and Windows platforms, although some small differences still exist. Old programs that use the gui commands can be updated using a perl script. More information about this can be found at the end of Chapter 9 of the Xmath Users Guide.
    I have done the conversion for the program that you attached. The gdmessage command has now been replaced with pguimessage. The conversion produces two files. The first is an updated ex.msc file that uses the new commands, the other is ex_build.msf that corresponds to your resource file. I have attached th
    e files as they were after the conversion. Some small changes are needed in order for it to look correct in Windows. I have attached these in the post that follows.
    Carl L
    National Instruments
    www.ni.com/matrixx
    Attachments:
    ex.msc ‏1 KB
    ex_build.msf ‏2 KB

  • [SOLVED] Laptop SATA drive on desktop computer not working

    Hey guys,
    My acer laptop crashed few days ago and I'm trying to recover the data off its SATA harddisk on my gf's desktop computer. I don't know why, but I get a lot of errors at startup.
    dmesg:
    Adding 2024180k swap on /dev/sda3. Priority:-1 extents:1 across:2024180k
    ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    ata5.00: BMDMA stat 0x25
    ata5.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
    res 51/04:20:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
    ata5.00: status: { DRDY ERR }
    ata5.00: error: { ABRT }
    ata5.00: configured for UDMA/133
    ata5: EH complete
    ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    ata5.00: BMDMA stat 0x25
    ata5.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
    res 51/04:20:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
    ata5.00: status: { DRDY ERR }
    ata5.00: error: { ABRT }
    ata5.00: configured for UDMA/133
    ata5: EH complete
    ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    ata5.00: BMDMA stat 0x25
    ata5.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
    res 51/04:20:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
    ata5.00: status: { DRDY ERR }
    ata5.00: error: { ABRT }
    ata5.00: configured for UDMA/133
    ata5: EH complete
    ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    ata5.00: BMDMA stat 0x25
    ata5.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
    res 51/04:20:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
    ata5.00: status: { DRDY ERR }
    ata5.00: error: { ABRT }
    ata5.00: configured for UDMA/133
    ata5: EH complete
    ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    ata5.00: BMDMA stat 0x25
    ata5.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
    res 51/04:20:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
    ata5.00: status: { DRDY ERR }
    ata5.00: error: { ABRT }
    ata5.00: configured for UDMA/133
    ata5: EH complete
    ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    ata5.00: BMDMA stat 0x25
    ata5.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
    res 51/04:20:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
    ata5.00: status: { DRDY ERR }
    ata5.00: error: { ABRT }
    ata5.00: configured for UDMA/133
    sd 4:0:0:0: [sdb] Result: hostbyte=0x00 driverbyte=0x08
    sd 4:0:0:0: [sdb] Sense Key : 0xb [current] [descriptor]
    Descriptor sense data with sense descriptors (in hex):
    72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    00 00 00 00
    sd 4:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
    end_request: I/O error, dev sdb, sector 0
    __ratelimit: 6 callbacks suppressed
    Buffer I/O error on device sdb, logical block 0
    Buffer I/O error on device sdb, logical block 1
    Buffer I/O error on device sdb, logical block 2
    Buffer I/O error on device sdb, logical block 3
    ata5: EH complete
    ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    ata5.00: BMDMA stat 0x25
    ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
    res 51/04:08:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
    ata5.00: status: { DRDY ERR }
    ata5.00: error: { ABRT }
    ata5.00: configured for UDMA/133
    ata5: EH complete
    ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    ata5.00: BMDMA stat 0x25
    ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
    res 51/04:08:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
    ata5.00: status: { DRDY ERR }
    ata5.00: error: { ABRT }
    ata5.00: configured for UDMA/133
    ata5: EH complete
    ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    ata5.00: BMDMA stat 0x25
    ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
    res 51/04:08:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
    ata5.00: status: { DRDY ERR }
    ata5.00: error: { ABRT }
    ata5.00: configured for UDMA/133
    ata5: EH complete
    ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    ata5.00: BMDMA stat 0x25
    ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
    res 51/04:08:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
    ata5.00: status: { DRDY ERR }
    ata5.00: error: { ABRT }
    ata5.00: configured for UDMA/133
    ata5: EH complete
    ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    ata5.00: BMDMA stat 0x25
    ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
    res 51/04:08:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
    ata5.00: status: { DRDY ERR }
    ata5.00: error: { ABRT }
    ata5.00: configured for UDMA/133
    ata5: EH complete
    ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    ata5.00: BMDMA stat 0x25
    ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
    res 51/04:08:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
    ata5.00: status: { DRDY ERR }
    ata5.00: error: { ABRT }
    ata5.00: configured for UDMA/133
    sd 4:0:0:0: [sdb] Result: hostbyte=0x00 driverbyte=0x08
    sd 4:0:0:0: [sdb] Sense Key : 0xb [current] [descriptor]
    Descriptor sense data with sense descriptors (in hex):
    72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    00 00 00 00
    sd 4:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
    end_request: I/O error, dev sdb, sector 0
    Buffer I/O error on device sdb, logical block 0
    ata5: EH complete
    I get the following output with hdparm:
    $ sudo hdparm -I /dev/sdb
    /dev/sdb:
    ATA device, with non-removable media
    Model Number: WDC WD2500BEVS-22UST0
    Serial Number: WD-WXE507A05038
    Firmware Revision: 01.01A01
    Standards:
    Supported: 8 7 6 5
    Likely used: 8
    Configuration:
    Logical max current
    cylinders 16383 16383
    heads 16 16
    sectors/track 63 63
    CHS current addressable sectors: 16514064
    LBA user addressable sectors: 268435455
    LBA48 user addressable sectors: 488397168
    Logical/Physical Sector size: 512 bytes
    device size with M = 1024*1024: 238475 MBytes
    device size with M = 1000*1000: 250059 MBytes (250 GB)
    cache/buffer size = 8192 KBytes
    Capabilities:
    LBA, IORDY(can be disabled)
    Queue depth: 32
    Standby timer values: spec'd by Standard, with device specific minimum
    R/W multiple sector transfer: Max = 16 Current = 1
    Advanced power management level: 128
    Recommended acoustic management value: 128, current value: 254
    DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
    Cycle time: min=120ns recommended=120ns
    PIO: pio0 pio1 pio2 pio3 pio4
    Cycle time: no flow control=120ns IORDY flow control=120ns
    Commands/features:
    Enabled Supported:
    SMART feature set
    * Security Mode feature set
    * Power Management feature set
    * Write cache
    * Look-ahead
    * Host Protected Area feature set
    * WRITE_BUFFER command
    * READ_BUFFER command
    * NOP cmd
    * DOWNLOAD_MICROCODE
    * Advanced Power Management feature set
    SET_MAX security extension
    Automatic Acoustic Management feature set
    * 48-bit Address feature set
    * Device Configuration Overlay feature set
    * Mandatory FLUSH_CACHE
    * FLUSH_CACHE_EXT
    * SMART error logging
    * SMART self-test
    * General Purpose Logging feature set
    * WRITE_{DMA|MULTIPLE}_FUA_EXT
    * 64-bit World wide name
    * IDLE_IMMEDIATE with UNLOAD
    * Segmented DOWNLOAD_MICROCODE
    * Gen1 signaling speed (1.5Gb/s)
    * Native Command Queueing (NCQ)
    * Host-initiated interface power management
    * Phy event counters
    DMA Setup Auto-Activate optimization
    Device-initiated interface power management
    * Software settings preservation
    * SMART Command Transport (SCT) feature set
    * SCT Long Sector Access (AC1)
    * SCT LBA Segment Access (AC2)
    * SCT Error Recovery Control (AC3)
    * SCT Features Control (AC4)
    * SCT Data Tables (AC5)
    unknown 206[12] (vendor specific)
    unknown 206[13] (vendor specific)
    Security:
    Master password revision code = 65534
    supported
    enabled
    locked
    not frozen
    not expired: security count
    not supported: enhanced erase
    Security level high
    92min for SECURITY ERASE UNIT.
    Logical Unit WWN Device Identifier: 50014ee2559ab684
    NAA : 5
    IEEE OUI : 0014ee
    Unique ID : 2559ab684
    Checksum: correct
    Note that the drive is password protected. If I use 'hdparm --security-disable' with my known password, it fails with the following error:
    $ sudo hdparm --security-disable password /dev/sdb
    security_password="password"
    /dev/sdb:
    Issuing SECURITY_DISABLE command, password="password", user=master
    SECURITY_UNLOCK: Input/output error
    If I try this for few times, the security count expires.
    I see three problems that it could have:
    - my hdparm/system/whatever does not fully support the drive; maybe the password cannot be accepted?
    - maybe the password used by the laptop bios was filled with other characters after my typing: spaces?
    - not the password is the problem, but getting information from the drive: not supported by this system?
    I assume dmesg is the key, but I can't interpret it. I hope someone could tell me what should I verify/do further, I have no idea what to test anymore.
    Last edited by akephalos (2009-08-30 11:27:42)

    djszapi wrote:Is it a crypted system ? Can't you boot into it from livecd neither ? What did you do immediately before when this error started to occur ?
    No, it is not encrypted. Just as an information, it contains 4 partitions: sdb1=NTFS, sdb2=ext4, sdb3=swap, sdb4=ext4.
    This error did not occur when I was using it on my laptop, but I took the HDD out and mounted it in my girlfriend's computer, she has another Arch installed there, so I don't meed to boot from this disk, just to be able to read it. The password is a disk password - hardware probably, not for encrypted partitions. I could not disable the password because the original laptop doesn't start anymore, and the BIOS settings on this desktop computer does not support HDD password, but only System password.
    So, if the HDD had no passwod set, I could tell you if the reading problem comes from some incompatibility issues, but as for now, I can't tell where it comes from, because I need to deactivate its security with hdparm --security-disable first. But this actually looks to not work, or something.
    I'm thinking that the mianboard doesn't support this HDD directly connected, the things I'll do next week are:
    - buying an external HDD 2.5 rack
    - plug it in the USB
    - try again hdparm and anything required to make it read.
    If this fails, too, probably the only remaining solution is to find someone with an Acer laptop to put this HDD inside and backup my data, or at least deactivate the pass from the bios setings.
    Btw, I think this is something worth mentioning to warn the users in general: this Acer 5520G was of very poor quality, things began to crack right after the one year guarantee expired, beginning with the DVD-writer.

Maybe you are looking for