ISDN: How to check whether its point-to-point or multipoint
Hi, Is there any show/debug command to see whether the isdn link is point-to-point or multipoint?
Hi,
we have ISDN2e. I want to check whether this ISDN is p-to-p or p-to-mp. From the configuration, i have not configured it manullay as a point to point or point to multipoint.
On this ISDN we have two ISDN numbers. How can i check it? below is the show isdn status command.
show isdn status
Global ISDN Switchtype = basic-net3
ISDN BRI0 interface
dsl 0, interface ISDN Switchtype = basic-net3
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 115, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 0 CCBs = 0
The Free Channel Mask: 0x80000003
Total Allocated ISDN CCBs = 0
Similar Messages
-
How to check Whether the File is in Progress or used by some other resource
Hi All,
I am retrieving a file from the FTP server using Apache commons FTP.
I need to check whether the file is fully retrieved or in progress.
for now i can able to use the file which is partially retrieved. it is not throwing any file sharing exception or i am unable to find whether it is in progress.
How to check whether the file is in progress ? or The file is accessed by some other resource ?
Pls Help me.
Thanks,
J.KathirHi Vamsi,
Explicitly such kind of requirement has not been catered and i dont think you would face a problem because any application that is writing to a file will open the file in the read only mode to any other simultaneous applications so i think your concerns although valid are already taken care off .
In the remote case you still face a problem then as a work around. Tell the FTP administrator to set the property to maximum connections that can be made to ftp as one. I wonder if you have heard of the concept of FTP handle , basically the above workaround is based on that concept itself. This way only one application will be able to write.
The file adapter will wait for its turn and then write the files.
Regards
joel
Edited by: joel trinidade on Jun 26, 2009 11:06 AM -
how to check whether my iphone is factory unlocked?
There is an easy way to confirm if an iPhone is factory unlocked or not, by using its IMEI.
Just check your IMEI number at this website : http://www.imei.info/
You will get all details including warranty and sim lock.
Thank you. -
R12.1.1 staging complete! How to check whether the stage is Good
Hi Gurusl,
I have completed staging R12.1.1 for Hp unix B.11.31. I want to know how to check whether the stage is good for installation or whether it is corrupted. Is there any metalink note or script from where we can check it. Ur help will be highly appreciated. Thanks in advance
regards,Hi,
Please refer to (Note: 802195.1 - MD5 Checksums for R12.1.1 Rapid Install Media).
Regards,
Hussein -
How to check whether transport path exist between two systems in sld??
Hi,
I have two systems namely 'A' and 'B' and created business systems for both of them.Then i created transport path between the two systems.How i check whether what i have done is right in SLD.<b>WRT to CMS</b>
am not sure with this but u can try:
1. Start CMS: http://<host>:<J2EE Engine http port>/webdynpro/dispatcher/sap.com/tcSLCMS~WebUI/Cms.
2. Goto lansdscape configurator and check there
Message was edited by:
Prabhu S -
How to check whether follow on document is created for sc or po,is there any table or fm available?
Hello Venu
Check FM: BBP_PD_SC_GETDETAIL and BBP_PD_PO_GETDETAIL table E_HEADER_REL
Check this: SRM Shopping cart and PO tables link
Regards -
How to check whether there r new txt files in a folder n file creation date
How to check whether there r new text files in a specified folder and what is the date of creation of the text file.........?
Hi
I have been searching for a solution to find the date of creation of a file for over 6 months now but haven't found it. So I presume that it is not possible though I havent found any authentication of my assumption in any document.
Cheers!
Shailesh -
How to check whether calendar is being used in any of the sap application
Hello All,
We are having few factory calendars. However some of the calendar having valid to year 2010. Can you please let me know how to check whether these calendar is being used in any of the sap application/module
kindly reply as early as possible
Regards
GirishHi RKS
yesterday BLOG by our SUMMER WANG helps every SRM consultant to debug the PO error
/people/summer.wang/blog/2010/05/11/trouble-shooting-of-srm-po-transfer-error
Good work Summer wang !!
Muthu -
How to check whether my sol man installation is on sol man 7.0 or?
Hellol All,
Can anyone help me How to check whether my sol man installation is on sol man 7.0 or sol man 7.0 EHP1.
Thank you,
SrihariHi,
Your system status should tell you that. Any logged in screen of your solution manager system --> Status. Component Version should be as "SAP EHP 1 for SAP Solution Manager 7.0" to be Ehp1 or "SAP Solution Manager 7.0"
Hope this answers your question.
Feel free to revert back.
-=-Ragu -
How to check whether the Application Server directory exits or not
Hi,
I have a selection screen in which I give the Application server file name(UNIX file) as input. Here, I would like to check whether the Server directory exists or not.
Let us say, the path I gave in the selection screen is /usr/sap/tmp/testfile.txt . Here, the file name is testfile.txt and the server directory is /usr/sap/tmp . I would like to check whether this directory /usr/sap/tmp exists in the server or not. I am not bothered about the file name as I am going to write data into the file. I am mainly concerned about whether the directory exists in the server or not. and one more thing... this is the Application Server path not the Local path.
Can anyone help me on the same how to check whether the server directory exists or not.
Thanks in advance.
Best Regards,
Pradeep.Also you can use the FM EPS_GET_DIRECTORY_LISTING for this purpose.
Store the directory name
l_dpath = p_file+0(l_no).
Validate the directory of the application server
CALL FUNCTION 'EPS_GET_DIRECTORY_LISTING'
EXPORTING
dir_name = l_dpath
TABLES
dir_list = l_i_dlist
EXCEPTIONS
invalid_eps_subdir = 1
sapgparam_failed = 2
build_directory_failed = 3
no_authorization = 4
read_directory_failed = 5
too_many_read_errors = 6
empty_directory_list = 7
OTHERS = 8.
If any problem occurs with the directory then display proper
error message
IF sy-subrc <> 0.
Display error message
MESSAGE e018 WITH 'Problem with directory entered'(008).
ENDIF. " sy-subrc <> 0
Regards,
Joy. -
How to check whether a Document in KM is classified or not using JAVA API
Hello Everyone,
Can anyone tell me, How to check whether a Document in KM is classified or not, using JAVA API's??
Thanks & Regards,
Adren D'SouzaHi,
The code is as follows:
IIndexService indexService = null;
try {
indexService = (IIndexService) ResourceFactory.getInstance().getServiceFactory().getService(IServiceTypesConst.INDEX_SERVICE);
} catch (ResourceException e) {
if (indexService == null) {
log.errorT("Error on instanciating the index service");
return this.renderMessage(this.getBundleString(RES_NO_INDEX_SERVICE), StatusType.ERROR);
// get index
IIndex index = null;
try {
index = indexService.getIndex("YourIndexID");
} catch (WcmException e1) {
log.errorT("Error when trying to get the index");
return this.renderMessage(this.getBundleString(RES_NO_INDEX), StatusType.ERROR);
// check if the index is a instance of AbstractClassificationIndex
AbstractClassificationIndex classiIndex = null;
if (index instanceof AbstractClassificationIndex) {
classiIndex = (AbstractClassificationIndex) index;
} else {
log.errorT("The index " + index.getIndexName() + " is no classification index");
return this.renderMessage(this.getBundleString(RES_NO_CLASSIFICATION_INDEX), StatusType.WARNING);
//give your KM Resource here for which you want to know if it is classified or not
boolean classified = classiIndex.isDocClassifiedInAnyTax(resource);
Regards,
Praveen Gudapati -
How to check whether system privilege are granted
How to check whether system privileges like 'create session' and other ones are granted for user.
Is there any sys table where this information is available?
Regards - NeuronKeep in mind select * from dba_sys_privs where grantee = 'some-user' will give you a list of privileges granted to some-user directly. To get complete list of system privs granted to a user both directly an via roles use:
ACCEPT USER PROMPT 'Please enter user name: '
COLUMN PATH FORMAT A90
SET LINESIZE 132
SELECT PATH,
PRIVILEGE
FROM DBA_SYS_PRIVS,
SELECT 'DIRECT GRANT' PATH,
'&USER' GRANTED_ROLE
FROM DUAL
UNION ALL
SELECT LTRIM(SYS_CONNECT_BY_PATH(GRANTED_ROLE,'->'),'->') PATH,
GRANTED_ROLE
FROM DBA_ROLE_PRIVS
START WITH GRANTEE = UPPER('&USER')
CONNECT BY PRIOR GRANTED_ROLE = GRANTEE
WHERE GRANTEE = GRANTED_ROLE
/Now on top of privileges granted to a user, user also has privileges granted to PUBLIC. To get privileges user receives via PUBLIC run the above script specifying PUBLIC at the prompt.
SY. -
How to check whether a field contains at least one numeric value
how to check whether a field contains at least one numeric value..
Hi,
I hope that this code will works.
constants:
c_digit_grp TYPE char11 VALUE '0123456789', " Digit group
* Data Declaration
data :
str type string.
* if you want check entire string and pass entire string
if str CA c_digit_grp.
* write your logic ---this block will execute atleast one numeric value exists in the string
Endif.
Regards
Bhupal Reddy -
How to check whether any table(s) required to shrink on database
Hi,
How to check whether any table(s) required to shrink on database
Regards,
VenkatVenkat wrote:
Hi,
Thi is Oracle 10g. How to use this?. I am not using toad etc...
I am on SQL prompt.
Regards,
Venkat.
for starter
Generate Script to Shrink Segment Advisor Recommendations [ID 1171054.1]
Automatic Segment Advisor in Oracle 10g Release 2 (10.2) [ID 314112.1]
10g and above SEGMENT ADVISOR [ID 242736.1]
Cheers -
How to check whether stock cover MRP requirements
Hi Everybody,
Could you please tell me how to check whether stock cover MRP requirements?
My user hope to block GR for PO. Because before GR, customer decrease their order qty. However, it is difficult if buyer decrease the PO qty manually. So, they hope SAP can calculate and block GR.
I know we can add the control in user exit of MIGO. However, I dont know how to check the stock whether cover MRP requirements. anybody can tell me what is the standard function? of course, it is okay if you have other solution such as via standard configurations.
Thank you in advanced.
Regards
HenryHello Ravi,
Thank you for your reminder.
We have double confirmed with our client. It is very difficult to using Scheduling Agreements instead of PO. because lots of job have to be changed such as
1. Share our Scheduling Agreements with suppliers on a new system such as Internet.
2. PO release strategy will be put into Scheduling Agreements. I dont know how to to reach this.
Customer may random decrease their order Qty even if they have sent formal order to us. So, we have to block GR for our supplier even if sent PO already. In OEM industry, it is truth already.
Hello BK,
I know in MD04, we can manually list. But, please tell me which function (SE37) can identify. We hope can call the function in user exit of MIGO.
Regards
Henry
Maybe you are looking for
-
Standard Process for Credit Memo & Debit Memos in CRM
Dear all, What is the standard process for Credit Memo and Credit Memo Creation within CRM Complaint Transaction? We can successfully replicate Return Items and Replacement Items in ECC Return Order But I don't know how to process Credit Memo and Deb
-
when installing iTunes on my new laptop a message box appears saying some sort of error has occured and i have to uninstall it then reinstall it again and it still won't work what should i do?
-
What's the best way of analyzing WCF performance
I have an issue in production WCF is very slow compared to WSE (Web services). Note: that issue is reproduced only in production and on the test servers everything goes fine. WCF is using basicHttpBinding. I read a lot about enabling tracing. But whe
-
Exchange 2003 and Exchange 2010 Coexistence Activesync Issue
Hello, I am currently on the progress of migrating mails from Exchange 2003 SP2 to Exchange 2010 SP3. Before I can do actual migration, I need to make sure that OWA and Activesync works when Exchange 2010 becomes Internet facing. Right now Exchange 2
-
I would like to uninstall iPhoto completely; MBP 2010, Yosemite
Hey guys. Noob here; please forgive. I'm at the point where I can't deal with the excess photos that iPhoto is creating. It's only going to get worse as I approach 17,000 photos. I've been using iPhoto and Lightroom, but I just don't want to deal w