ISE 1.1.1 - Error Code 12521 EAP-TLS failed SSL/TLS handshake after a client alert

Hello,
Has anyone come across this error code before?  I have looked in the 1.1.1 troubleshooting section and there is nothing there. When I click on the link for the description off the error in ISE I get the following error:
I setup 7925 phones for EAP-TLS using MIC.  I have uploaded Cisco's Root CA and Manufactoring CA Certificates and enabled "Trust for client authentication".  A Certificate Profile is configured matching Common Name and is added to the Identity Sequence.    I got some additional attribute information, where there is a error message:
OpenSSLErrorMessage=SSL alert code=0x233=563 ; source=remote ; type=fatal ; message="decrypt error"
Anyone know what this error means?

Yes,
That could be it see if you can follow this guide on importing the ISE self signed cert: (i used a 7921 guide but it should be similar).
http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7921g/7_0/english/administration/guide/7921cfgu.html#wp1376129
Installing the Authentication Server Root Certificate
The Authentication Server Root Certificate must be installed on the Cisco Unified Wireless IP Phone 7921G.
To install the certificate, follow these steps:
Step 1 Export the Authentication Server Root Certificate from the ACS. See Exporting Certificates from the ACS.
Step 2 Go to the phone web page and choose Certificates.
Step 3 Click Import next to the Authentication Server Root certificate.
Step 4 Restart the phone.
Thanks,
Tarik Admani
*Please rate helpful posts*

Similar Messages

  • ISE Problem: EAP-TLS failed SSL/TLS handshake because of an unknown CA in the client certificates chain

    Hello, I´m stucked with this problem for 3 weeks now.
    I´m not able to configure the EAP-TLS autentication.
    In the "Certificate Store" of the ISE server I have Installed the Root, policy and the Issuing certificates as "trust for client authentication",and in the Local store I have a certificate issuing for the same issuing authority which sign the thw client ones.
    The ISE´s certificate has been issued with the "server Authentication certificate" template.
    The clients have installed the certificates  also the certificate chain.
    When I try to authenticate the wireless clients I allways get the same error: "     Authentication failed : 12514 EAP-TLS failed SSL/TLS handshake because of an unknown CA in the client certificates chain"
    and "OpenSSLErrorMessage=SSL alert
    code=0x230=560 ; source=local ; type=fatal ; message="Unknown CA - error self-signed certificate in chain",OpenSSLErrorStack=  1208556432:error:140890B2:SSL routines:SSL3_GET_CLIENT_CERTIFICATE:no certificate returned:s3_srvr.c:2720"
    I don´t know what else can I do.
    Thank you
    Jorge

    Hi Rik,
    the Below are the certificate details
    ISE Certificate Signed by XX-CA-PROC-06
    User PKI Signed by XX-CA-OTHER-08
    In ISE certificate Store i have the below certificates
    XX-CA-OTHER-08 signed by XX-CA-ROOT-04
    XX-CA-PROC-06 signed by XX-CA-ROOT-04
    XX-CA-ROOT-04 signed by XX-CA-ROOT-04
    ISE certificate signed by XX-CA-PROC-06
    I have enabled - 'Trust for client authentication' on all three certificates
    this is unchecked - 'Enable Validation of Certificate Extensions (accept only valid certificate)'
    when i check the certificates of current user in the Client PC this is how it shows.
    XX-CA-ROOT-04 is listed in Trusted root Certification Authority
    and XX-CA-PROC-06 and XX-CA-OTHER-08  are in Intermediate Certificate Authorities

  • 12520 EAP-TLS failed SSL/TLS handshake because the client rejected the ISE local-certificate

    Hi guys,
    I have root CA and intermediate CA in ISE local certificate store trusted for client authentication.
    I have imported both root ca and client certificate in the device I want to authenticate, but ISE keeps spitting out this error :
    12520 EAP-TLS failed SSL/TLS handshake because the client rejected the ISE local-certificate

    Refer the link for troubleshooting in page no 22 the issue is mentioned, check it: http://www.cisco.com/c/dam/en/us/solutions/collateral/enterprise/design-zone-security/howto_81_troubleshooting_failed_authc.pdf

  • Help!!! T61 Blue Screen--unmountable boot volume-- error code 0000: Read verification failed

    My computer is T61 (8891CT), but Blue Screen came out and reported--unmountable boot volume.  I ran the diagnostic program and got the error code 0000: Read verification failed. I can’t run anything now including the restore and rescue.  Has the hard drive died?
    If the hard drive has died, I have to change the hard drive, but how to transfer the system (I don’t have any CD) and think vantage software? Thank you very much for you help.

    Hi equalefk,
    Yes, definitely sounds like it's time to replace the HDD.
    Hope it helps.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • HP Officejet Pro 8610 - Error Code: " 0xc19a0013" (missing or failed printhead)

    I purchased the printer (HP Officejet Pro 8610 e-All-in-one printer) in January, 2015.  The printer functioned properly - copy, fax, and scan, until two days ago.  Now, it does not print at all.  Received an error code: "0xc19a0013" (Missing or Failed Printhead).  An expanded version of the error code reads:  "The Printhead appears to be missing, not detected, or incorrectly installed.  Error Code: 0xc19a0013.   The printer uses a removable printhead, HP Ink Cartridges 950 (black) and  951(cmy).  I have used HP Support Troubleshooting recommendations: all software and firmware for this printer is installed; the HP ink cartridges are not low or empty; removed the ink cartridges from the printhead and reinstalled them.
    There are multible steps in the troubleshooting recommendation, but I stopped at removing the printhead.  Because of my technical inexperience, and there were too many ceveats (beware, caution, proper reinstallation, and etc.)  with removing the printhead that could cause greater problems.  So, I stopped at removing and cleaning the printhead.  Also, used the HP Printer Scan Doctor for assistance. The tool for cleaning the printhead doesn't work.   What troubles me most with the 0xc19a0013 error code is its explanation: The printhead appears to be missing, not detected, or incorrectly installed.  I can use all the help I can get to understand what is going on with the error code that I have received, and how to resolve the malfunctioning printer.
    This question was solved.
    View Solution.

    Contact HP technical support at 800-474-6836 for more options.
    If you live outside the US/Canada Region, please click the link below to get the support number for your region. 
    Country-language selector.
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • Windows Server 2012 Windows Backup failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).

    The Volume Shadow Copy service initially was running under the context of System, so we thought that ‘System’ doesn’t have permissions to access network shares. 
    When the Volume Shadow Copy service was running under the context of System, this was the error logged:
    “failed with following error code '0x8078014B' (There was a failure in creating a directory on the backup storage location.).”
    Which is likely due to not having permissions to write to the network location. 
     This is a scheduled backup trying to write to a network location, so we changes the service to run under the context of an account that does have permissions to write to the network share.
      Then the error changed to this:
    “failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).”
    HRESULT 0x8078006b
    DetailedHRESULT 0x8004230f
    ErrorMessage %%2155348075
    BackupState 12
    VolumesInfo <VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0"
    BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0"
    TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228"
    DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0"
    FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0"
    /></VolumeInfo>
    We aren’t really seeing anything that gives any hint on what the issue is. 
    Any ideas?  Thanks in advance!

    We are trying to back up folders/files from 2 local drives (C: & D:), both of which have only 10% space used, and 100 GB free. 
    We are attempting to back the files up to a Remote Shared File (and there is 100+ GB free space out there). 
      If we try another network location, we receive the exact same error. 
     This is Windows Server 2012, not running Hyper-V and is a physical server not a VM.
    Thank you for the link. 
    Looking in: 
    Event Viewer / Application and Service Logs / Microsoft / Windows / Backup / Operational
    But it doesn’t seem to give any more details: 
    Log Name:     
    Microsoft-Windows-Backup
    Source:       
    Microsoft-Windows-Backup
    Date:         
    7/8/2013 8:00:12 PM
    Event ID:     
    5
    Task Category: None
    Level:        
    Error
    Keywords:     
    User:         
    SYSTEM
    Computer:     
    servername.edu
    Description:
    The backup operation that started at '‎2013‎-‎07‎-‎09T02:00:06.273000000Z' has failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).
    Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
    <Provider Name="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}" />
    <EventID>5</EventID>
    <Version>3</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2013-07-09T02:00:12.872602100Z" />
    <EventRecordID>30</EventRecordID>
    <Correlation />
    <Execution ProcessID="3028" ThreadID="3996" />
    <Channel>Microsoft-Windows-Backup</Channel>
    <Computer>servername.edu</Computer>
    <Security UserID="S-1-5-18" />
      </System>
      <EventData>
    <Data Name="BackupTemplateID">{A421E864-A115-4288-8D12-F4878CF8A248}</Data>
    <Data Name="HRESULT">0x8078006b</Data>
    <Data Name="DetailedHRESULT">0x8004230f</Data>
    <Data Name="ErrorMessage">%%2155348075</Data>
    <Data Name="BackupState">12</Data>
    <Data Name="BackupTime">2013-07-09T02:00:06.273000000Z</Data>
    <Data Name="BackupTarget">\\servername\BACKUP</Data>
    <Data Name="NumOfVolumes">2</Data>
    <Data Name="VolumesInfo">&lt;VolumeInfo&gt;&lt;VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0"
    IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /&gt;&lt;VolumeInfoItem
    Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0"
    NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /&gt;&lt;/VolumeInfo&gt;</Data>
    <Data Name="SourceSnapStartTime">2013-07-09T02:00:06.289250300Z</Data>
    <Data Name="SourceSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="PrepareBackupStartTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="PrepareBackupEndTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="BackupWriteStartTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="BackupWriteEndTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="TargetSnapStartTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="TargetSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="DVDFormatStartTime">&lt;TimesList&gt;&lt;/TimesList&gt;</Data>
    <Data Name="DVDFormatEndTime">&lt;TimesList&gt;&lt;/TimesList&gt;</Data>
    <Data Name="MediaVerifyStartTime">&lt;TimesList&gt;&lt;/TimesList&gt;</Data>
    <Data Name="MediaVerifyEndTime">&lt;TimesList&gt;&lt;/TimesList&gt;</Data>
    <Data Name="BackupPreviousState">2</Data>
    <Data Name="ComponentStatus">&lt;ComponentStatus&gt;&lt;/ComponentStatus&gt;</Data>
    <Data Name="ComponentInfo">&lt;ComponentInfo&gt;&lt;/ComponentInfo&gt;</Data>
    <Data Name="SSBEnumerateStartTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SSBEnumerateEndTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SSBVhdCreationStartTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SSBVhdCreationEndTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SSBBackupStartTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SSBBackupEndTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SystemStateBackup">&lt;SystemState IsPresent="0" HResult="0" DetailedHResult="0" /&gt;</Data>
    <Data Name="BMR">&lt;BMR IsPresent="0" HResult="0" DetailedHResult="0" /&gt;</Data>
    <Data Name="VssFullBackup">false</Data>
    <Data Name="UserInputBMR">false</Data>
    <Data Name="UserInputSSB">false</Data>
    <Data Name="BackupSuccessLogPath">
    </Data>
    <Data Name="BackupFailureLogPath">
    </Data>
    <Data Name="EnumerateBackupStartTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="EnumerateBackupEndTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="PruneBackupStartTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="PruneBackupEndTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="BackupFlags">0x9</Data>
    <Data Name="ComponentInfoSummary">&lt;ComponentInfoSummary ComponentInfoArrayPresent="1" TotalComponents="0" SucceededComponents="0" /&gt;</Data>
      </EventData>
    </Event>

  • EAP-TLS error .........failed SSL/TLS handshake because of an unknown CA in client certificate chain

    Hi,
    I am using 802.1x and EAP-TLS as authentication protocol. The clients are not able to pass the authentication the error log on ACS is
    Authentication failed: EAP-TLS handshake failed SSL/TLS handshake because of an unknown CA in the client certification chain.
    I have installed certificates on the WLC and ACS, however authentication is unsuccessful.
    Can anybody help regarding this issue.

    Hi Sandeep,
    Web auth certificate is defult certificate in wlc but you can also use your own(3rd party).
    http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/70584-csr-wlc-00.html
    Virtual interface : This interface handles any mobility management, VPN Termination, Web authentication, and is also a DHCP relay for WLAN clients.
    Yes its interconnected, the purpose for this entry is so that the controller knows the name of the of the certificates to virtual address translation.
    1. Guest Client go to google.com
    2. Client goes to DNS (the one its is assign in DHCP)
    3. DNS resolves the DNS for google.com
    4. Client then attempts to go to google.com
    5. Controller intercepts GET and replaces it with a 1.1.1.1
    6. Controller then takes the 1.1.1.1 and translates this to the DNS name to negat the (accpet this cert screen)
    7. DNS then gets resolve to the name (example guest.xxx.com)
    8. Controller presents the guest screen
    Hope it helps.
    Regards
    Dont forget to rate helpful posts

  • Preverification failed with error code 1. BUILD FAILED

    Hallo Oracle,
    Am learning my first J2me application and when i build it am getting this error. can some one help me understand what it means
    Created dir: C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverifysrc
    Copying 1957 files to C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverifysrc
    Created dir: C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverified
    Preverifying 1957 file(s) into C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverified directory.
    Error preverifying class com.sun.activation.registries.MailcapFile
        VERIFIER ERROR com/sun/activation/registries/MailcapFile
    .<init>(Ljava/lang/String;)V:
    Cannot find class java/util/Map
    C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\nbproject\build-impl.xml:431: Preverification failed with error code 1.
    BUILD FAILED (total time: 25 seconds)
    this is the contents of build-impx.xml
    <?xml version="1.0" encoding="UTF-8"?>
    <!-- *** GENERATED FROM project.xml - DO NOT EDIT *** -->
    <project name="watsdownapp-impl" default="jar" basedir="..">
        <!--load-properties-->
        <target name="pre-load-properties">
            <property file="nbproject/private/private.properties"/>
            <property name="user.properties.file" location="${netbeans.user}/build.properties"/>
            <available property="user.properties.file.exists" file="${user.properties.file}"/>
        </target>
        <target name="exists.config.active" unless="config.active">
            <echo level="warning" message="Active configuration (config.active property) is not set - using default."/>
            <property value="" name="config.active"/>
        </target>
        <target name="exists.netbeans.user" unless="netbeans.user">
            <echo level="warning" message="NetBeans IDE user directory (netbeans.user property) is not set. By specifying this property many properties required by the project will be automatically evaluated (e.g.: ant-ext library home, ...). You could also open this project in the NetBeans IDE - in this case this property would be set automatically."/>
        </target>
        <target name="exists.user.properties.file" unless="user.properties.file.exists">
            <echo level="warning" message="User properties file (user.properties.file) property is not set. By specifying this property many properties required by the project will be automatically evaluated (e.g.: libraries, platforms, ...)."/>
        </target>
        <target name="load-properties" depends="pre-load-properties,exists.config.active,exists.netbeans.user,exists.user.properties.file">
            <loadproperties srcfile="nbproject/project.properties">
                <filterchain>
                    <containsregex pattern="^configs\.${config.active}\.(.*)" replace="\1"/>
                    <concatfilter prepend="nbproject/project.properties"/>
                    <containsregex pattern="^platform.active=|^deployment.method=|^deployment.instance="/>
                </filterchain>
            </loadproperties>
            <property name="deployment.instance" value="default"/>
            <loadproperties srcfile="${user.properties.file}">
                <filterchain>
                    <replaceregex pattern="^platforms\.${platform.active}\." replace="platform."/>
                    <replaceregex pattern="^deployment\.${deployment.method}\.scriptfile=" replace="deployment.scriptfile="/>
                    <replaceregex pattern="^deployments\.${deployment.method}\.${deployment.instance}\.([^=]+)=" replace="\1="/>
                </filterchain>
            </loadproperties>
            <loadproperties srcfile="nbproject/project.properties">
                <filterchain>
                    <containsregex pattern="^configs\.${config.active}\.(.*)" replace="\1"/>
                    <concatfilter prepend="nbproject/project.properties"/>
                </filterchain>
            </loadproperties>
        </target>
        <!--basic-init-->
        <target name="exists.platform.active" unless="platform.active">
            <echo level="warning" message="Active platform (platform.active property) in not set. If you set this and user.properties.file property, many properties required by the project will be automatically evaluated (e.g.: platform home, platform classpath, ...)."/>
        </target>
        <target name="exists.platform.configuration" unless="platform.configuration">
            <echo level="warning" message="Platform configuration (platform.configuration) is not set. Using default (CLDC-1.0) configuration."/>
            <property name="platform.configuration" value="CLDC-1.0"/>
        </target>
        <target name="exists.platform.profile" unless="platform.profile">
            <echo level="warning" message="Platform profile (platform.profile) is not set. Using default (MIDP-1.0) profile."/>
            <property name="platform.profile" value="MIDP-1.0"/>
        </target>
        <target name="basic-init" depends="exists.platform.active,exists.platform.configuration,exists.platform.profile">
            <fail unless="libs.j2me_ant_ext.classpath">Classpath to J2ME Ant extension library (libs.j2me_ant_ext.classpath property) is not set. For example: location of mobility/modules/org-netbeans-mobility-antext.jar file in the IDE installation directory.</fail>
            <fail unless="platform.home">Platform home (platform.home property) is not set. Value of this property should be ${platform.active.description} emulator home directory location.</fail>
            <fail unless="platform.bootclasspath">Platform boot classpath (platform.bootclasspath property) is not set. Value of this property should be ${platform.active.description} emulator boot classpath containing all J2ME classes provided by emulator.</fail>
            <fail unless="src.dir">Must set src.dir</fail>
            <fail unless="build.dir">Must set build.dir</fail>
            <fail unless="dist.dir">Must set dist.dir</fail>
            <fail unless="dist.jar">Must set dist.jar</fail>
            <property name="javac.source" value="1.3"/>
            <property name="javac.target" value="1.1"/>
            <property name="javac.encoding" value="${file.encoding}"/>
            <property name="deployment.number" value="0.0.1"/>
            <property name="deployment.counter" value="000002"/>
            <condition property="no.deps">
                <istrue value="${no.dependencies}"/>
            </condition>
            <condition property="no.preprocess">
                <isfalse value="${use.preprocessor}"/>
            </condition>
            <condition property="no.javadoc.preview">
                <isfalse value="${javadoc.preview}"/>
            </condition>
            <condition property="filter.excludes.evaluated" value="${filter.excludes},${filter.more.excludes},**/*Test.java,**/test,**/test/**">
                <istrue value="${filter.exclude.tests}"/>
            </condition>
            <property name="filter.excludes.evaluated" value="${filter.excludes},${filter.more.excludes}"/>
            <condition property="deployment.do.override.jarurl" value="">
                <istrue value="${deployment.override.jarurl}"/>
            </condition>
            <condition property="config.active.name" value="DefaultConfiguration">
                <length string="${config.active}" trim="true" length="0"/>
            </condition>
            <property name="config.active.name" value="${config.active}"/>
            <taskdef resource="org/netbeans/mobility/antext/defs.properties">
                <classpath>
                    <pathelement path="${libs.j2me_ant_ext.classpath}"/>
                </classpath>
            </taskdef>
            <condition property="skip.deployment">
                <equals arg1="${deployment.method}" arg2="NONE" casesensitive="false" trim="true"/>
            </condition>
            <condition property="app-version.autoincrement.trigger">
                <istrue value="${app-version.autoincrement}"/>
            </condition>
            <condition property="debug.timeout" value="30000">
                <or>
                    <equals arg1="${debugger.timeout}" arg2="" trim="true"/>
                    <not>
                        <isset property="debugger.timeout"/>
                    </not>
                </or>
            </condition>
            <property name="debug.timeout" value="${debugger.timeout}"/>
            <nb-overrideproperty name="buildsystem.baton" value="${src.dir}"/>
        </target>
        <!--cldc-init-->
        <target name="cldc-pre-init">
            <condition property="cldc-platform.trigger">
                <equals arg1="CLDC" arg2="${platform.trigger}" casesensitive="false"/>
            </condition>
        </target>
        <target name="cldc-init" depends="cldc-pre-init" if="cldc-platform.trigger">
            <property name="preverify.sources.dir" location="${build.dir}/preverifysrc"/>
            <property name="manifest.build.file" location="${build.dir}/manifest.mf"/>
            <property name="platform.device" value=""/>
            <property name="dist.jad.url" value="file://"/>
            <property name="run.cmd.options" value=""/>
            <condition property="evaluated.run.security.domain" value="">
                <isfalse value="${run.use.security.domain}"/>
            </condition>
            <property name="evaluated.run.security.domain" value="${run.security.domain}"/>
            <condition property="override.jarurl.trigger">
                <and>
                    <istrue value="${cldc-platform.trigger}"/>
                    <istrue value="${deployment.override.jarurl}"/>
                </and>
            </condition>
            <property name="deployment.jad" location="${dist.dir}/${dist.jad}"/>
            <property name="deployment.jar" location="${dist.dir}/${dist.jar}"/>
            <property name="deployment.dir" location="${dist.dir}"/>
            <patternset id="deployment.patternset">
                <include name="${dist.jad}"/>
                <include name="${dist.jar}"/>
            </patternset>
        </target>
        <!--cdc-init-->
        <target name="cdc-init">
            <condition property="cdc-platform.trigger">
                <equals arg1="CDC" arg2="${platform.trigger}" casesensitive="false"/>
            </condition>
            <available file="${manifest.file}" property="manifest.available"/>
            <condition property="main.class.applet">
                <equals arg1="${main.class.class}" arg2="applet" casesensitive="false"/>
            </condition>
            <condition property="main.class.xlet">
                <equals arg1="${main.class.class}" arg2="xlet" casesensitive="false"/>
            </condition>
            <condition property="manifest.available+main.class+fat.jar">
                <and>
                    <isset property="manifest.available"/>
                    <isset property="main.class"/>
                    <istrue value="${platform.fat.jar}"/>
                    <not>
                        <equals arg1="${main.class}" arg2="" trim="true"/>
                    </not>
                </and>
            </condition>
            <condition property="manifest.available+main.class">
                <and>
                    <isset property="manifest.available"/>
                    <isset property="main.class"/>
                    <isfalse value="${platform.fat.jar}"/>
                    <not>
                        <equals arg1="${main.class}" arg2="" trim="true"/>
                    </not>
                </and>
            </condition>
            <condition property="application.version.invalid" value="true">
                <equals arg1="${deployment.number}" arg2="" trim="true"/>
            </condition>
            <fail if="application.version.invalid" message="Property deployment.number must not be empty and must contain version in format %d.%d.%d!"/>
            <condition property="sign.jar.trigger" value="true">
                <and>
                    <isset property="cdc-platform.trigger"/>
                    <istrue value="${sign.enabled}"/>
                </and>
            </condition>
        </target>
        <!--semc-init-->
        <target name="semc-pre-init" if="cdc-platform.trigger">
            <condition property="semc-platform.trigger">
                <equals arg1="semc" arg2="${platform.type}" casesensitive="false"/>
            </condition>
        </target>
        <target name="semc-init" depends="semc-pre-init" if="semc-platform.trigger">
            <condition property="semc.icon.invalid" value="true">
                <or>
                    <contains string="${semc.application.icon}" substring="$${"/>
                    <equals arg1="${semc.application.icon}" arg2="" trim="true"/>
                </or>
            </condition>
            <condition property="no.certificateorkey" value="true">
                <or>
                    <isset property="no.application.uid"/>
                    <equals arg1="${semc.certificate.path}" arg2="" trim="true"/>
                    <contains string="${semc.certificate.path}" substring="$${semc.certificate.path"/>
                    <equals arg1="${semc.private.key.path}" arg2="" trim="true"/>
                    <contains string="${semc.private.key.path}" substring="$${semc.private.key.path"/>
                </or>
            </condition>
            <property name="j9.dist" location="${build.dir}/j9/${semc.application.uid}.j9"/>
            <taskdef resource="org/netbeans/modules/j2me/cdc/project/defs.properties">
                <classpath>
                    <pathelement path="${libs.cdc-ant-utils.classpath}"/>
                </classpath>
            </taskdef>
            <taskdef resource="org/netbeans/modules/j2me/cdc/project/semc/defs.properties">
                <classpath>
                    <pathelement path="${libs.semc-ant-utils.classpath}"/>
                </classpath>
            </taskdef>
            <property name="deployment.dir" location="${dist.dir}"/>
            <patternset id="deployment.patternset">
                <include name="*.sis"/>
                <include name="*.SIS"/>
            </patternset>
        </target>
        <!--savaje-init-->
        <target name="savaje-pre-init" if="cdc-platform.trigger">
            <condition property="savaje-platform.trigger">
                <equals arg1="savaje" arg2="${platform.type}" casesensitive="false"/>
            </condition>
        </target>
        <target name="savaje-init" depends="savaje-pre-init" if="savaje-platform.trigger">
            <property name="savaje.application.uid" value="TBD"/>
            <condition property="savaje.bundle.base.invalid" value="true">
                <or>
                    <equals arg1="${savaje.bundle.base}" arg2="" trim="true"/>
                    <contains string="${savaje.bundle.base}" substring="$${savaje.bundle.base"/>
                </or>
            </condition>
            <condition property="savaje.unsupported.main" value="true">
                <or>
                    <equals arg1="${main.class.applet}" arg2="true"/>
                </or>
            </condition>
            <condition property="savaje.icon.invalid" value="true">
                <or>
                    <isset property="no.application.uid"/>
                    <contains string="${savaje.application.icon}" substring="$${"/>
                    <equals arg1="${savaje.application.icon}" arg2="" trim="true"/>
                </or>
            </condition>
            <property name="jnlp.dist" value="${build.dir}/jnlp/bundle.jnlp"/>
            <property name="deployment.dir" location="${dist.dir}"/>
            <patternset id="deployment.patternset">
                <include name="bundle.jnlp"/>
                <include name="bundle.policy"/>
                <include name="lib/*"/>
            </patternset>
        </target>
        <!--sjmc-init-->
        <target name="sjmc-pre-init" if="cdc-platform.trigger">
            <condition property="sjmc-platform.trigger">
                <equals arg1="sjmc" arg2="${platform.type}" casesensitive="false"/>
            </condition>
        </target>
        <target name="sjmc-init" depends="sjmc-pre-init" if="sjmc-platform.trigger"/>
        <!--ojec-init-->
        <target name="ojec-pre-init" if="cdc-platform.trigger">
            <condition property="ojec-platform.trigger">
                <equals arg1="ojec" arg2="${platform.type}" casesensitive="false"/>
            </condition>
        </target>
        <target name="ojec-init" depends="ojec-pre-init" if="ojec-platform.trigger"/>
        <!--cdc-hi-init-->
        <target name="cdc-hi-pre-init" if="cdc-platform.trigger">
            <condition property="cdc-hi-platform.trigger">
                <equals arg1="cdc-hi" arg2="${platform.type}" casesensitive="false"/>
            </condition>
        </target>
        <target name="cdc-hi-init" depends="cdc-hi-pre-init" if="cdc-hi-platform.trigger"/>
        <!--nokiaS80-init-->
        <target name="nokiaS80-pre-init" if="cdc-platform.trigger">
            <condition property="nokiaS80-platform.trigger">
                <equals arg1="nokiaS80" arg2="${platform.type}" casesensitive="false"/>
            </condition>
        </target>
        <target name="nokiaS80-init" depends="nokiaS80-pre-init" if="nokiaS80-platform.trigger">
            <property name="j9.dist" location="${build.dir}/j9/NOKIA.j9"/>
            <property name="manifest.build.file" location="${build.dir}/manifest.mf"/>
            <condition property="nokia.icon.invalid">
                <or>
                    <contains string="${nokiaS80.application.icon}" substring="$${"/>
                    <equals arg1="${nokiaS80.application.icon}" arg2="" trim="true"/>
                </or>
            </condition>
            <property name="deployment.dir" location="${dist.dir}"/>
            <patternset id="deployment.patternset">
                <include name="${dist.jar}"/>
            </patternset>
        </target>
        <!--init-->
        <target name="pre-init"/>
        <target name="post-init"/>
        <target name="init" depends="pre-init,load-properties,basic-init,cldc-init,cdc-init,semc-init,savaje-init,sjmc-init,ojec-init,cdc-hi-init,nokiaS80-init,post-init"/>
        <!--conditional clean-->
        <target name="conditional-clean-init">
            <uptodate property="no.clean.before.build" targetfile="${build.dir}/.timestamp">
                <srcfiles dir="nbproject">
                    <include name="project.properties"/>
                    <include name="build-impl.xml"/>
                </srcfiles>
            </uptodate>
        </target>
        <target name="conditional-clean" depends="init,conditional-clean-init" unless="no.clean.before.build" description="Clean project in case its meta information has changed.">
            <antcall target="do-clean" inheritall="true" inheritrefs="true"/>
        </target>
        <!--deps-jar-->
        <target name="deps-jar" depends="conditional-clean" unless="no.deps"/>
        <!--preprocess-->
        <target name="pre-preprocess"/>
        <target name="do-preprocess" unless="no.preprocess">
            <fail unless="preprocessed.dir">Must set preprocessed.dir</fail>
            <property name="abilities" value=""/>
            <property name="debug.level" value="debug"/>
            <mkdir dir="${preprocessed.dir}"/>
            <echo message="ignore me" file="${build.dir}/.timestamp"/>
            <nb-prep destdir="${preprocessed.dir}" preprocessfor="${config.active.name},${abilities},DebugLevel=${debug.level}" encoding="${javac.encoding}">
                <fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated}"/>
            </nb-prep>
            <copy todir="${preprocessed.dir}">
                <fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated},${build.classes.excludes}"/>
            </copy>
            <nb-overrideproperty name="buildsystem.baton" value="${preprocessed.dir}"/>
        </target>
        <target name="post-preprocess"/>
        <target name="preprocess" depends="deps-jar,pre-preprocess,do-preprocess,post-preprocess" description="Preprocess project sources."/>
        <!--compile-->
        <target name="pre-compile"/>
        <target name="do-compile">
            <fail unless="build.classes.dir">Must set build.classes.dir</fail>
            <mkdir dir="${build.classes.dir}"/>
            <javac includeantruntime="false" source="${javac.source}" target="${javac.target}" deprecation="${javac.deprecation}" optimize="${javac.optimize}" debug="${javac.debug}" destdir="${build.classes.dir}" srcdir="${buildsystem.baton}" bootclasspath="${platform.bootclasspath}" encoding="${javac.encoding}">
                <classpath>
                    <path path="${libs.classpath}"/>
                </classpath>
            </javac>
            <copy todir="${build.classes.dir}">
                <fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated},${build.classes.excludes}"/>
            </copy>
            <nb-overrideproperty name="buildsystem.baton" value="${build.classes.dir}"/>
        </target>
        <target name="extract-libs" description="Extracts all bundled libraries.">
            <mkdir dir="${build.classes.dir}"/>
            <nb-extract dir="${build.classes.dir}" excludeManifest="true" classpath="${libs.classpath}" excludeclasspath="${extra.classpath}"/>
        </target>
        <target name="post-compile"/>
        <target name="compile" depends="preprocess,pre-compile,extract-libs,do-compile,post-compile" description="Compile project classes."/>
        <!--compile-single-->
        <target name="pre-compile-single"/>
        <target name="do-compile-single">
            <fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail>
            <mkdir dir="${build.classes.dir}"/>
            <javac includeantruntime="false" source="${javac.source}" target="${javac.target}" deprecation="${javac.deprecation}" optimize="${javac.optimize}" debug="${javac.debug}" srcdir="${buildsystem.baton}" destdir="${build.classes.dir}" bootclasspath="${platform.bootclasspath}" includes="${javac.includes}" encoding="${javac.encoding}">
                <classpath>
                    <path path="${libs.classpath}"/>
                </classpath>
            </javac>
        </target>
        <target name="post-compile-single"/>
        <target name="compile-single" depends="preprocess,pre-compile-single,do-compile-single,post-compile-single" description="Compile selected project classes."/>
        <!--proguard-->
        <target name="proguard-init" description="Up-to-date check before obfuscation.">
            <property name="obfuscation.level" value="0"/>
            <condition property="no.obfusc">
                <or>
                    <equals arg1="${obfuscation.level}" arg2="0"/>
                    <uptodate targetfile="${obfuscator.destjar}">
                        <srcfiles dir="${buildsystem.baton}"/>
                    </uptodate>
                </or>
            </condition>
            <uptodate property="obfuscation.up-to-date" targetfile="${obfuscator.destjar}">
                <srcfiles dir="${buildsystem.baton}"/>
            </uptodate>
        </target>
        <target name="skip-obfuscation" depends="proguard-init" if="obfuscation.up-to-date">
            <fail unless="obfuscated.classes.dir">Must set obfuscated.classes.dir</fail>
            <nb-overrideproperty name="buildsystem.baton" value="${obfuscated.classes.dir}"/>
        </target>
        <target name="proguard" depends="skip-obfuscation" description="Obfuscate project classes." unless="no.obfusc">
            <fail unless="obfuscated.classes.dir">Must set obfuscated.classes.dir</fail>
            <fail unless="obfuscator.srcjar">Must set obfuscator.srcjar</fail>
            <fail unless="obfuscator.destjar">Must set obfuscator.destjar</fail>
            <property name="obfuscator.classpath" value=""/>
            <dirname file="${obfuscator.srcjar}" property="obfuscator.srcjar.dir"/>
            <dirname file="${obfuscator.destjar}" property="obfuscator.destjar.dir"/>
            <mkdir dir="${obfuscator.srcjar.dir}"/>
            <mkdir dir="${obfuscator.destjar.dir}"/>
            <jar jarfile="${obfuscator.srcjar}" basedir="${buildsystem.baton}"/>
            <property name="obfuscation.custom" value=""/>
            <nb-obfuscate srcjar="${obfuscator.srcjar}" destjar="${obfuscator.destjar}" obfuscatorclasspath="${obfuscator.classpath}" classpath="${platform.bootclasspath}:${extra.classpath}" obfuscationLevel="${obfuscation.level}" extraScript="${obfuscation.custom}"/>
            <mkdir dir="${obfuscated.classes.dir}"/>
            <unjar src="${obfuscator.destjar}" dest="${obfuscated.classes.dir}"/>
            <nb-overrideproperty name="buildsystem.baton" value="${obfuscated.classes.dir}"/>
        </target>
        <!--obfuscate-->
        <target name="pre-obfuscate"/>
        <target name="post-obfuscate"/>
        <target name="obfuscate" depends="compile,pre-obfuscate,proguard,post-obfuscate" description="Obfuscate project classes."/>
        <!--lwuit-build-->
        <import file="lwuit.xml" optional="true"/>
        <target name="-lwuit-check">
            <condition property="lwuit.allowed">
                <and>
                    <available file="nbproject/lwuit.xml"/>
                    <isset property="is.mesdk_lwuit"/>
                </and>
            </condition>
        </target>
        <target name="-pre-lwuit-build" depends="-lwuit-check" if="lwuit.allowed"/>
        <target name="-lwuit-build" depends="-lwuit-check" if="lwuit.allowed">
            <antcall target="lwuit_build"/>
        </target>
        <target name="-post-lwuit-build" depends="-lwuit-check" if="lwuit.allowed"/>
        <target name="lwuit-build" depends="-lwuit-check,-pre-lwuit-build, -lwuit-build, -post-lwuit-build" if="lwuit.allowed"/>
        <!--preverify-->
        <target name="pre-preverify"/>
        <target name="do-preverify" if="cldc-platform.trigger">
            <fail unless="preverify.classes.dir">Must set preverify.classes.dir</fail>
            <mkdir dir="${preverify.sources.dir}"/>
            <copy todir="${preverify.sources.dir}">
                <fileset dir="${buildsystem.baton}" includes="**/*.class"/>
            </copy>
            <mkdir dir="${preverify.classes.dir}"/>
            <nb-preverify srcdir="${preverify.sources.dir}" destdir="${preverify.classes.dir}" classpath="${platform.bootclasspath}:${extra.classpath}" configuration="${platform.configuration}" platformhome="${platform.home}" platformtype="${platform.type}" commandline="${platform.preverifycommandline}"/>
            <copy todir="${preverify.classes.dir}">
                <fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated},${build.classes.excludes}"/>
            </copy>
            <nb-overrideproperty name="buildsystem.baton" value="${preverify.classes.dir}"/>
        </target>
        <target name="post-preverify"/>
        <target name="preverify" depends="obfuscate,lwuit-build,pre-preverify,do-preverify,post-preverify" description="Preverify project classes."/>
        <!--set-password-->
        <target name="set-password-init">
            <property name="sign.enabled" value="false"/>
            <condition property="skip-sign-keystore-password-input">
                <or>
                    <isfalse value="${sign.enabled}"/>
                    <and>
                        <isset property="sign.keystore"/>
                        <isset property="sign.keystore.password"/>
                        <not>
                            <equals arg1="${sign.keystore}" arg2="" trim="true"/>
                        </not>
                        <not>
                            <equals arg1="${sign.keystore.password}" arg2="" trim="true"/>
                        </not>
                    </and>
                </or>
            </condition>
            <condition property="skip-sign-alias-password-input">
                <or>
                    <isfalse value="${sign.enabled}"/>
                    <and>
                        <isset property="sign.keystore"/>
                        <isset property="sign.alias"/>
                        <isset property="sign.alias.password"/>
                        <not>
                            <equals arg1="${sign.keystore}" arg2="" trim="true"/>
                        </not>
                        <not>
                            <equals arg1="${sign.alias}" arg2="" trim="true"/>
                        </not>
                        <not>
                            <equals arg1="${sign.alias.password}" arg2="" trim="true"/>
                        </not>
                    </and>
                </or>
            </condition>
        </target>
        <target name="set-keystore-password" if="netbeans.home" unless="skip-sign-keystore-password-input">
            <nb-enter-password keystore="${sign.keystore}" passwordproperty="sign.keystore.password"/>
        </target>
        <target name="set-alias-password" if="netbeans.home" unless="skip-sign-alias-password-input">
            <nb-enter-password keystore="${sign.keystore}" keyalias="${sign.alias}" passwordproperty="sign.alias.password"/>
        </target>
        <target name="set-password" depends="set-password-init,set-keystore-password,set-alias-password"/>
        <!--create JAD-->
        <target name="add-configuration" unless="contains.manifest.configuration">
            <nb-output file="${dist.dir}/${dist.jad}" encoding="UTF-8" append="true">MicroEdition-Configuration: ${platform.configuration}
    </nb-output>
            <nb-output file="${manifest.build.file}" encoding="UTF-8" append="true">MicroEdition-Configuration: ${platform.configuration}
    </nb-output>
        </target>
        <target name="add-profile" unless="contains.manifest.profile">
            <nb-output file="${dist.dir}/${dist.jad}" encoding="UTF-8" append="true">MicroEdition-Profile: ${platform.profile}
    </nb-output>
            <nb-output file="${manifest.build.file}" encoding="UTF-8" append="true">MicroEdition-Profile: ${platform.profile}
    </nb-output>
        </target>
        <target name="create-jad" if="cldc-platform.trigger">
            <fail unless="dist.jad">Must set dist.jad</fail>
            <mkdir dir="${build.dir}"/>
            <dirname file="${dist.dir}/${dist.jad}" property="dist.jad.dir"/>
            <mkdir dir="${dist.jad.dir}"/>
            <condition property="evaluated.manifest.apipermissions" value="${manifest.apipermissions}">
                <not>
                    <equals arg1="${platform.profile}" arg2="MIDP-1.0"/>
                </not>
            </condition>
            <condition property="evaluated.manifest.pushregistry" value="${manifest.pushregistry}">
                <not>
                    <equals arg1="${platform.profile}" arg2="MIDP-1.0"/>
                </not>
            </condition>
            <condition property="contains.manifest.configuration">
                <contains substring="MicroEdition-Configuration: " string="${manifest.others}"/>
            </condition>
            <condition property="contains.manifest.profile">
                <contains substring="MicroEdition-Profile: " string="${manifest.others}"/>
            </condition>
            <property value="" name="evaluated.manifest.apipermissions"/>
            <property value="" name="evaluated.manifest.pushregistry"/>
            <property name="manifest.jad" value=""/>
            <property name="manifest.manifest" value=""/>
            <nb-output file="${dist.dir}/${dist.jad}" encoding="UTF-8">${manifest.midlets}${evaluated.manifest.apipermissions}${evaluated.manifest.pushregistry}${manifest.others}${manifest.jad}</nb-output>
            <nb-output file="${manifest.build.file}" encoding="UTF-8">${manifest.midlets}${evaluated.manifest.apipermissions}${evaluated.manifest.pushregistry}${manifest.others}${manifest.manifest}</nb-output>
            <antcall target="add-configuration" inheritall="true" inheritrefs="true"/>
            <antcall target="add-profile" inheritall="true" inheritrefs="true"/>
            <property name="manifest.available" value="true"/>
        </target>
        <!--do-extra-libs-->
        <target name="do-extra-libs" if="extra.classpath">
            <property name="dist.lib.dir" value="${dist.dir}/lib"/>
            <mkdir dir="${dist.lib.dir}"/>
            <copy todir="${dist.lib.dir}">
                <path path="${extra.classpath}"/>
                <flattenmapper/>
            </copy>
        </target>
        <!--nokiaS80-manifest-->
        <target name="nokiaS80-prepare-j9" if="nokiaS80-platform.trigger">
            <fail message="Main class is not set!">
                <condition>
                    <equals arg1="${main.class}" arg2="" trim="true"/>
                </condition>
            </fail>
            <mkdir dir="${build.dir}/j9"/>
            <taskdef name="j9builder" classname="org.netbeans.modules.j2me.cdc.project.J9Builder" classpath="${libs.cdc-ant-utils.classpath}"/>
            <j9builder jvmargs="${run.jvmargs}" mainclass="${main.class}" args="${application.args}" home="${platform.home}" dist="${j9.dist}" id="NOKIA" platform="${platform.type}" xlet="${main.class.xlet}" applet="${main.class.applet}" jarname="${dist.jar}"/>
            <copy file="${manifest.file}" tofile="${manifest.build.file}" failonerror="false"/>
            <property name="manifest.available" value="true"/>
            <loadfile property="nokia.manifest.j9" srcFile="${j9.dist}"/>
        </target>
        <target name="nokiaS80-prepare-manifest" depends="nokiaS80-prepare-j9" if="nokiaS80-platform.trigger" unless="nokia.icon.invalid">
            <pathconvert property="logo.icon.name" pathsep=" ">
                <path path="${nokiaS80.application.icon}"/>
                <chainedmapper>
                    <flattenmapper/>
                    <globmapper from="*" to="*"/>
                </chainedmapper>
        

    The error says class file is missing, you can try to clean and build.

  • Blu-ray Error: "device error", Code "3", Note: "CreateStcSequence: Fail to write M25 File.

    I keep getting this error message about 11gb into burning a 22gb Blu-ray. "Blu-ray Error: "device error", Code "3", Note: "CreateStcSequence: Fail to write M25 File." I have tried just about everything from running as administrator, starting a new project and changing the disc too. I am using CS6 and going crazy... any ideas?

    Hi,
    First try to create Bly Ray Image Under option 'Output" Select BluRay Image, and also select the destination to create Image and click on Build, It will create a BluRay Image with extension of .iso. Now to burn BluRay Disc, you need to Select BluRay Disc under 'Output' Option and Below under 'Source' Option select BluRay Image instead of current project and Select the destination where you have put .iso Image, Then click on Build and it will burn BluRay disc.
    In simple , First create an Image then Burn that image to BluRay .
    I hope, it will help you.
    Thanks

  • Logic and OS X Lion - i/o error code 36 - fade update fail

    Logic and OS X Lion - i/o error code 36 -
    from the moment i installed Lion, Logic started giving me the i/o error code 36 - fade update failed. I had never seen it before.
    Anytime I change a fade, or crossfade, i get this error code, which is all the time.
    I have tried all updates, and I even reinstalled Logic. What do I do?

    do any of these help:
    http://www.native-instruments.com/forum/showthread.php?p=925390
    Http://discussions.apple.com/thread/2768362?start=0&tstart=0

  • Pages in Cisco ISE 1.2 says Error code WAP00008.

    When i am trying to access Cisco ISE
    Pages Policy>Policy Elements>Dictonaries
    i get the following error on firefox(MAC)
    There was an error while parsing and rendering the content. (node.getAttribute is not a function)
    Error code WAP00008.
    Error on Chrome(MAC)
    There was an error while parsing and rendering the content. (Object # has no method 'getAttribute')
    Error code WAP00008.
    it works fine on IE(windows) and firefox
    but gives the same error on Chrome,
    Any one else facing the same issue ?

    This now seems to be across Firefox and Chrome on both Mac and Windows OS systems.. Cisco need to make sure there products can work with the updated browsers as customers cannot be expecetd to always roll back a browser version to fix a problem..... Does anyone know what the root cause might be for this issue ? Java plugins ? so customers can get a solution to allow administration of ISE across OS platforms and Browsers...

  • Cisco ISE 1.1.4 Error Code 500

    Hello,
    I just installed the evaluation of Cisco ISE 1.1.4 on ESXi 5.1.
    My EXSi config is this:
    4GB RAM, 80GB HDD, 2 cores, Redhat 5 32bit
    I was able to install it with no problem, but when I tried to login using the web GUI, I am getting an error message stating:
    Internal Error
    Error Code 500.
    I am able to login using the console and SSH. I already set the correct timezone for both ISE and my computer.  I also tried different browsers, but I am still getting the same error and can't login at all via GUI.
    Any help would be greatly appreciated.
    Thanks

    Here is my show application status ise output
    KA-ISE/admin# show application status ise
    ISE Database listener is running, PID: 3960
    ISE Database is running, number of processes: 28
    ISE Application Server is still initializing.
    ISE M&T Session Database is running, PID: 3620
    ISE M&T Log Collector is running, PID: 5785
    ISE M&T Log Processor is running, PID: 6001
    ISE M&T Alert Process is running, PID: 5674
    % WARNING: ISE DISK SIZE NOT LARGE ENOUGH FOR PRODUCTION USE
    % RECOMMENDED DISK SIZE: 200 GB, CURRENT DISK SIZE: 85 GB
    KA-ISE/admin#
    I have rebooted my ISE server, but I am still getting the same error message. Regarding the DNS, I have not set up my AD/DNS yet. But I am guessing I should be able to GUI to ISE server regardless of not having it connected to AD or DNS.

  • SSIS 2012: SSIS Error Code "Excel Connection Manager" failed with error code 0xC0202009.

    Hi,
    This is kind of weird issue that I am experiencing with excel connection manager in SSIS 2012. This issue occurs sometimes but when I close and re-open SSDT (SQL Server Data Tools - newer BIDS) then this issues goes off temporarily.
    Just FYI, through SSDT environment I executed the package successfully with both settings Run64bit runtime setting to Yes and No when error does not occur.
    So far I have installed
    http://www.microsoft.com/en-us/download/details.aspx?id=13255 (Microsoft Access Database Engine 2010 Redistributable).
    I still remember for older versions of SQL Server (2005 & 2008) that I have executed Excel connection SSIS packages with Run64bit runtime = false i.e. in 32-bit mode. As far as I know I think Excel 64-bit issue has been resolved with SQL Server
    2012 release.
    Here is the detail of error message:
    TITLE: Package Validation Error
    Package Validation Error
    ADDITIONAL INFORMATION:
    Error at Data Flow Task [Excel Source [2]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.  The AcquireConnection method call to the connection manager "Excel Connection
    Manager" failed with error code 0xC0202009.  There may be error messages posted before this with more information on why the AcquireConnection method call failed.
    Error at Data Flow Task [SSIS.Pipeline]: Excel Source failed validation and returned error code 0xC020801C.
    Error at Data Flow Task [SSIS.Pipeline]: One or more component failed validation.
    Error at Data Flow Task: There were errors during task validation.
    Error at Package [Connection manager "Excel Connection Manager"]: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.
    An OLE DB record is available.  Source: "Microsoft Access Database Engine"  Hresult: 0x80004005  Description: "Unspecified error".
     (Microsoft.DataTransformationServices.VsIntegration)
    Here are my environment details:
    SQL Server 2012 {Microsoft SQL Server 2012 (SP1) - 11.0.3368.0 (X64) } , Excel 2010 (32-bit). I am developing SSIS code on Virtual desktops with Windows 7 32-bit OS.
    Also it occurred to me that since Virtual Desktops are on Shared Infrastructure, the source files and SSIS packages (code) can be on Shared drives for e.g. \\<Corpnet>\userdata\<Corp_Users_Grp>\<Username>\Visual Studio 2010\Projects\Integration
    Services Project2\Integration Services Project2\Package.dtsx.
    Does this kind of Shared drives have any impact to give this issue?
    Thanks in advance!
    Ketan
    P.S.: I had look at this forum question -->
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/903bbe1d-e070-4c43-9d3b-0a5193550029/64bit-error-in-excel-connection-manager-in-ssis

    Hi Arthur,
    Thanks for your response.
    Yes, it looks like SSIS still has bunch of issues with Excel files like as follows:
    1) Some times excel source files cannot be parsed by excel source connection manager.
    2) For derive column conversion, we can't replace the existing column. rather, we have to add the derived column as " add as new column" which is tough to manage  while destination mapping.
    3) If an column in excel contains a data which is not of the data type assigned for the column in excel, the excel source reads that data as "null". For the same, we can't validate the data and redirect the erroneous data in reject file.  <-- For
    this we tried IMEX setting also
    4) In multi-tab/sheet excel file, excel source is unable to detect a tab and identify the metadata of the excel.
    I am also checking Microsoft connect for Excel issues with SSIS 2012(https://connect.microsoft.com/SQLServer/SearchResults.aspx?SearchQuery=excel#&&PageIndex=22
    As worst case scenario, I am thinking of converting Excel to CSV file or Flat text file. (http://www.mssqltips.com/sqlservertip/2772/importing-data-from-excel-using-ssis--part-2/).
    Do you think it is advisable to convert Excel into CSV or Flat file.
    Thanks,
    Ketan

  • Help needed: PS CC2014 Update failed, then after uninstalling reinstall failed. Initial error code U44M1I210 (when update failed), now error -55 (reinstall fail)

    I tried to update Photoshop CC 2014, but it failed at 75%, with error code U44M1I210. After restarting my system, it still failed so I uninstalled the app, per this article: https://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html
    Now the reinstall won't complete, and I'm getting error -55. The one other article that seemed relevant looks like the person had to uninstall and reinstall all his Adobe software after creating a new admin account on his computer (When I try to update I get an U44M1I210 error message, "Unable to extract the downloaded files" - help please, applies to latest Indesign, Illustrator and Photoshop CC), and I'm hoping there is a better solution than the hours that will involve.
    Running on OSX 10.7.5.
    Any help greatly appreciated.
    Thanks!

    GundamCat what specific errors were you able to discover in the installation log for the update?

  • Error Code 720; USB ports failing; the horror.... the horror

    Ok, so I have been banging my head against the wall and seconds away from using my T60 as a boat anchor. I'll give the particulars and then we can grow from there. XP; sp3; 2g ram... what else do we need?
    Dec. 6th - everything worked fine ( ahem, restore won't work, nice) What worked? Me being able to connect to the internet using Verizon software and phone with a usb cable at work.
    Dec. 7th - phone was unable to connect to the computer via usb cable; installed all associated software and drivers with the usb cable and phone. Intermittent problems with the wifi, but still able to connect via wifi. downloaded and reinstalled drivers for usb and phone. ran PC doc to check USBs... both in and out of Winglows, all checks balance.
    Dec. 8th - Same issues, was able to get usb to work, but then the magic error code 720, pops up. Called Verizon. They wanted me to do a firmware update on the phone. Sure, fine....
    Dec. 9th - Take the phone in the shop; it's all firm. Oh, guess what? error code 720. So, I call Verizon and get on the 2-3 day wait list. Search the web. high and low I searched. I found people who have had the same problems. (http://forums.lenovo.com/lnv/board/message?board.id=Special_Interest_Windows&thread.id=398&view=by_d...) yeah. So, a side problem here. I tried these steps, which seemed to make sense. Basically, they state that there is a conflict with the WAN (ip) & (pptp). It suggest to delete from registry and delete from Device Manager and reinstall. SUPER. Well, it kinda worked, but then it didn't really at all. Windohs would not allow me to delete the WAN (ip) because it wanted it to boot something - what that is I still don't know. I could not delete. So, if that is a solution it is mingled with errors on my side. Which could possibly be the solution to all of this, but if that were all....
    The Next Day - regardless what day this was going on I cannot seem to (a) diagnose any of the conflicts - see (c) because that basically ruins msconfig, and the effing security chip makes it hang on the startup even though it is disabled in bios (I think this angered the computer greatly), (b) get device manager to play nice meaning that it locks up either by searching for devices or deleting the above mentioned drivers, (c) successfully restart the machine as it hangs on what appears to be the BSODs distant cousin that won't let Winblows completely shutdown, (d) if the phone was able to connect to the computer code 720 again, (e) USBs were fluctuating some boots would have USBs some would not - note: I did disable windows ability to manage power, as it has been suggested.
    Today - Verizon called, "something is wrong with your computer not your phone." Thanks. Confirmed that by using my fiancée's Dell...
    So, I ask the great minds of the INTERWEB, is there anything I can do besides format c:? Is there a solution to my problem?
    I thank you in advance for your time and consideration...

    Hi，
    If you made any changes prior to this issue, then undo the changes, such as a system restore (if you have).
    Try boot your PC into safe mode to test this issue.
    And one common cause of Code 39 errors is the corruption of two specific registry values, locate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\08002BE10318}. you need to delete the upperfilter and lowerfilter registry values, detailed
    steps, please refer to this link (make sure to backup your registry before aking any registry changes for incorrect changes might cause serious issue)
    http://pcsupport.about.com/od/driverssupport/ht/upperfilters-lowerfilters.htm
    And as Rick said, it is also necessary to contact the manufacture support.
    NOTE
    This
    response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
    Microsoft
    does not control these sites and has not tested any software or information found on these sites.
    Yolanda Zhu
    TechNet Community Support

Maybe you are looking for

  • Ipod nano, firewire error msg and refusal to stop

    Recently I had an error message on my nano stating that the iPod does not support FireWire. This message occured while I was using the iPOD while running and there for it was not connected to any computer. I use a windowsXP machine, and thus no firew

  • Regarding Data type syntax

    Hi All, I want to store some floating (decimal points) values in Active directory on which I can perform search filter. is there any datatype  syntax which will provide support to store this values? If know how I can achieve this functionality?

  • Can't receive mail on Mac mail ! os 10.6-8

    hi i'm now stuck since last week on 2 computers i can't use mail ! the message say my password are wrong etc.... - i tried remake the account, change the key chain etc... nothing works. - the only solution i get for the moment ! i download thunderbir

  • I m not able to paste files in my windows partition

    Please help me to do that i dont want to format my pc.

  • Free item in ME21N

    Hello, Hope you can help me on how to make the free item in ME21N automaticaly checked and grayed out. I'm currently exploring this features and I can't see this in SPRO. Hope you can give me instruction on the configuration that should be made or if