ISE 1.2.0.899 and large number of alerts

Hey,
I have been in touch with our Cisco Partner about this, but I didn't get anywhere and the case was closed without a resolution..
It turns out that you cannot clear more than 1000 alerts at once in ISE.
This is a huge issue for me, because we have over 10k configuration change alerts that was generated when a user mistakenly created a few too many guest accounts through the sponsor portal.
I am hoping there is a way I can clear up all these old alerts without having to click 9k of them one at a time to clear them..
I considered automating the clicking through javascript in my browser, but of course the alert list was a flash object, so I couldn't do that either..
-- Regards, Morten

Hi Morten,
This is a known issue - https://tools.cisco.com/bugsearch/bug/CSCul58094/?reffering_site=dumpcr
This will be fixed in ISE 1.3 However, you can delete all the alerts in one go using root patch and sql cmds.
~BR
Jatin Katyal
**Do rate helpful posts**

Similar Messages

I want to change the sharing and permissions of a large number of photos. How can I do this in bulk rather than one at a time?

I want to change the sharing and permissions of a large number of photos. How can I do this in bulk rather than one at a time?

Does this involve iPhoto in some way?

I have an iPad 2 with iOS 5.1 and iBooks version 2.1.1. I have 64GB of storage, 80% is used. iBooks is using 250MB of storage. I have a large number of PDF files in my iBooks library. At this time I can not add another book or PDF file to my library.

I have an iPad 2 with iOS 5.1 and iBooks version 2.1.1. I have 64GB of storage, 80% is used. iBooks is using 250MB of storage. I have a large number of PDF files in my iBooks library. At this time I can not add another book or PDF file to my library. When I try to move a PDF file to iBooks the system works for a while...sometimes the file appears and than disappears....sometimes the file never appears. Is ther some limit to the number of books or total storage used in IBooks? Thanks....

Hi jybravo70,
Welcome to the Apple Support Communities!
It sounds like you may be experiencing issues on your non iOS 8 devices because iOS 8 is required to set up or join a Family Sharing group.
The following information is located in the print at the bottom of the article.
Apple - iCloud - Family Sharing
Family Sharing requires a personal Apple ID signed in to iCloud and iTunes. Music, movies, TV shows, and books can be downloaded on up to 10 devices per account, five of which can be computers. iOS 8 and OS X Yosemite are required to set up or join a Family Sharing group and are recommended for full functionality. Not all content is eligible for Family Sharing.
Have a great day,
Joe

I've just changed from a PC to a mac and have a large number of downloaded WMA music files (not i-tunes purchases) which I just can't get into my i-tunes library. File converters don't seem to work either. Any ideas?

I've just changed from a PC to a mac and have a large number of downloaded WMA music files which I can't get into i-tunes. When the library was in Windows, i-tunes would convert the files automatically, but this doesn't happen now. I've downloaded a couple of file converters, but these don't seem to work either. Any ideas?

iTunes for Windows (but not iTunes for Mac) can import and convert unprotected WMA tracks. If the tracks are protected by DRM (Digital Rights Management) then it will not accept them.
One option would be to install iTunes on your PC, do the conversion, and then transfer the converted tracks from iTunes on your PC to iTunes on your Mac.

How do I create new versions of a large number of images, and place them in a new location?

Hello!
I have been using Aperture for years, and have just one small problem. There have been many times where I want to have multiple versions of a large number of images. I like to do a color album and B&W album for example.
Previously, I would click on all the images at one, and select new version. The problem is this puts all of the new versions in a stack. I then have to open all the stacks, and one by one move the new versions to a different album. Is there any way to streamline this proccess? When it's only 10 images, it's no problem. When it's a few hundred (or more) its rather time consuming..
What I'm hoping for is a way to either automatically have new versions populate a separate album, or for a way to easily select all the new versions I create at one time, and simply move them with as few steps as possible to a new destination.
Thanks for any help,
Ricardo

Ricardo,
in addition to Kirby's and phosgraphis's excellent suggestions, you may want to use the filters to further restrict your versions to the ones you want to access.
For example, you mentioned
I like to do a color album and B&W album for example.
You could easily separate the color versions from the black-and-white versions by using the filter rule:
Adjustment includes Black&white
or
Adjustment does not include Black&white
With the above filter setting (Add rule > Adjustment includes Black&White) only the versions with Black&White adjustment are shown in the Browers. You could do similar to separate cropped versions from uncropped ones.
Regards
Léonie

Communicate large number of parameters and variables between Verstand and Labview Model

We have a dyno setup with a PXI-E chassis running Veristand 2014 and Inertia 2014. In order to enhance capabilities and timing of Veristand, I would like to use Labview models to perform tasks not possible by Veristand and Inertia. An example of this is to determine the maximum of a large number of thermocouples. Veristand has a compare funtion, but it compares only two values at a time. This makes for some lengthy and inflexible programming. Labview, on the other hand, has a function which aloows one to get the maximum of elements in an array in a single step. To use Labview I need to "send" the 50 or so thermocouples to the Labview model. In addition to the variables which need to be communicated between Veristand and Labview, I also need to present Labview with the threshold and confguration parameters. From the forums and user manuaIs understand that one has to use the connector pane in Labview and mapping in Veristand System Explorer to expose the inports and outports. The problem is that the Labview connector pane is limited to 27 I/O. How do I overcome that limitation?
BTW. I am fairly new to Labview and Versitand.
Thank you.
Richard
Solved!
Go to Solution.

@Jarrod:
Thank you for the help. I created a simple test model and now understand how I can use clusters for a large number of variables. Regarding the mapping process: Can one map a folder of user channels to a cluster (one-step mapping)? Alternatively, I understand one can import a mapping (text) file in System Explorer. Is this import partial or does it replace all the mapping? The reason I am asking is that, if it is partial, then I can have separate mapping files for different configurations and my final mapping can be a combination of imported mapping files.
@SteveK:
Thank you for the hint on using a Custom Device. I understand that the Custom Device will be much more powerful and can be more generic. The problem at this stage is that my limitations in programming in Labview is far gretater than Labview models' limitations in Veristand. I'll definitely consider the Custom Device route once I am more provicient with LabView. Hopefully I'll be able to re-use some of the VI's I created for the LabView models.
Thanks
Richard

I have a large number of photos I'd like to delete from my ipad 2 however from reading previous comments it seems I have to unsync from the original source computer. I'm in another country now and don't have access to it. Is there another way?

I have a large number of photos I'd like to delete from my ipad 2 however from reading previous comments it seems I have to unsync from the original source computer. I'm in another country now and don't have access to it. Is there another way?

You should be able to do this via the iPad directly. Open the Photos application and the forward arrow, then select all of the photos you want to delete and click the red delete button.

Large number of FNDSM and FNDLIBR processes

hi,
description of my system
Oracle EBS 11.5.10 + oracle 9.2.0.5 +HP UX 11.11
problem : ther are large number of FNDSM , FNLIBR and sh processes during peak load around 300 , but even at no load these processes dont come down , though oracle processes
come down from 250 to 80 but these apps processes just dont get killed automatically .
can i kill these processes manually??
one more thing , even after stopping apllications with adstpall.sh , these processes dont get killed , is it normal??, so i just dismount database so as to kill these processes
and under what circumstances , should i run cmclean ?

Hi,
problem : ther are large number of FNDSM , FNLIBR and sh processes during peak load around 300 , but even at no load these processes dont come down , though oracle processesThis means there are lots of zombie processes running and all these need to be killed.
Shutdown your application and database and take a bounce of the server as there are too many zombie processes. I have once faced the issue in which due to these zombie process CPU utilization has gone to 100% on continuous count.
Once you restart the server, start database and listener run cmclean and start the application services.
one more thing , even after stopping apllications with adstpall.sh , these processes dont get killed , is it normal??, so i just dismount database so as to kill these processesNo it's not normal and should not be neglected. I should also advice you to run the [Oracle Application Object Library Concurrent Manager Setup Test|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=200360.1]
and under what circumstances , should i run cmclean ?[CMCLEAN.SQL - Non Destructive Script to Clean Concurrent Manager Tables|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=134007.1]
You can run the cmclean if you find that after starting the applications managers are not coming up or actual processes are not equal to target processes.
Thanks,
Anchorage :)

Fastest way to handle and store a large number of posts in a very short time?

I need to handle a very large number of HTTP posts in a very short period of time. The handling will consist of nothing more than storing the data posted and returning a redirect. The data will be quite small (email, postal code). I don't know exactly how
many posts, but somewhere between 50,000 and 500,000 over the course of a minute.
My plan is to use the traffic manager to distribute the load across several data centers, and to have a website scaled to 10-instances per data center. For storage, I thought that Azure table storage would be the ideal way to handle this, but I'm not sure
if the latency would prevent my app from handling this much data.
Has anyone done anything similar to this and have a suggestion for storing the data? Perhaps buffering everything into memory would be ideal and then batching from there to table storage. I'm starting to load-test the direct to table-storage solution and
am not encouraged.

You are talking about a website with 500,000 posts per minute with re-direction, so you are talking about designing a system that can handle at least 500,000 users? Assuming that not all users are doing posts within a one minute timeframe, then you
are talking about designing a system that can handle millions of users at any one time.
Event hub architecture is completely different from the HTTP post architecture, every device/user/session writes directly to the hub. I was just wondering if that actually work better for you in your situation.
Frank
The site has no session or page displaying. It literally will record a few form values posted from another site and issue a redirect back to that originating site. It is purely for data collection. I'll see if it is possible to write directly to the event hub/service
bus system from a web page. If so, that might work well.

Status and messaging for systems with a large number of classes

Very common dilemma we coders face when creating
systems involving a large number of classes:
Any standard framework to take care of the global status of the whole application and of gui subsystems
for both status handling and report messages to users?
Something light if possible...and not too much threads.

Ah, I see,
I found JPanel with CardLayout or a JTabbedPane very good for control of several GUI in an application - as alternative organization tool I use a JTree, which is used for both, selecting and organizing certain tasks or data in the application - tasks are normally done with data associated with them (that is, what an object is for), so basically a click onto a node in this JTree invokes an interface method of that object (the userObject), which is associated with this node.
Event handling should be done by the event-handling-thread only as far as possible - it is responsible for it so leave this job to it. This will give you control over the order in which the events are handled. Sometimes it needs a bit more work to obey this rule - for example communication coming from the outside (think of a chat channel for example) must be converted to an event source driven by a thread normally. As soon as it is an event source, you can leave it's event handling to the event handling thread again and problems with concurrent programming are minimized again.
It is the same with manipulating components or models of components - leave it to the event handling thread using a Runnable and SwingUtilities.invokeLater(Runnable). This way you can be sure that each manipulation is done after the other in the order you have transferred it to the event handling thread.
When you do this consequently most of your threads will idle most of the time - so give them a break using Thread.sleep(...) - not all platforms provide preemptive multitasking and this way it is garanteed, that the event handling thread will get a chance to run most of the time - which results in fast GUI update and fast event handling.
Another thing is, that you should use "divide and conquer" also within a single GUI panel - place components in subpanels and transfer the responsibility for the components in this panel to exactly these subpanels - think of a team manager which makes his employees work together. He reports up to his super manager and transfers global order from his boss into specific tasks by delegation to the components, he is managing. If you have this in mind, when you design classes, you will have less problem - each class is responsible for a certain task - define it clearly and define to whom it is reporting (its listeners) and what these listeners may be interested in.
When you design the communication structure within your hierarchy of classes (directors, managers, team managers and workers) have in mind, that the communication structure should not break the management hierarchy. A director gives global orders to a manager, which delegates several tasks to the team managers, which make their workers do what is needed. This structure makes a big company controlable by directors - the same principles can also keep control within an application.
greetings Marsian

Business connector scheduler gets hanged and Next run value is large number

Hi All,
I see the scheduler in business connector gets hanged and the Next run value shows huge/large number like 9223370831700598.0 sec. Please can anyone suggest what can be done.
Currently BC ver is 4.7. The problem gets resolved every time when i restart the server.

Hi,
Not aware of the reason though, I guess you must be using the simple scheduled tasks.
Try using complex reapting tasks where you specify days , minutes etc.
It should work fine.
Hope it helps. Reward if useful.
Regards,
Siddhesh S.Tawate

Hi, I have a large number of products in one column and prices of the products in another. Most prices are different. I want to know if it is possible to increase all of the prices by 5% or 10% etc. Hope someone can help. From Stiffy

Hi, This is my first time I hope someone can help.
I am working with numbers and I have a large number of products in one column and the relevent prices in another. All the prices are different and I want to increase the price of everything by 5% or 10% etc. Is this possible?
Thanks in advance
Stiffy123

Ad a new, temporary column (or one you can hide when not using). Let's say the current Prices are in column C and the new column is D.
you can inflate the prices in column C by 5% by entering the formula in the first cell of column D as:
=C2*105%
likes this:
to fill down, select D2, then copy, then select the D3 thru the end of the column, then paste. Now select C2 thru the end of column C, now paste over the existing values using the menu item "Edit > Paste Values"
you can now hide column D until you need to use it again.

Need to blacklist (block) a large number of domains and email addresses

I tried to import a large number of domains into a transport rule (new/set-transportrule -name xxx -domainis $csv -quarantine $true).
I added a few domains manually and tested to make sure the rule was working. It was. Then I ran the cmdlet to import a small number of domains (4). That also worked. Then I ran the cmdlet on a large number of domains. The cmdlet
worked with no error message (once I got the list of domains well under 4096 bytes). I waited a day to see if the domains would show up in the rule. But the imported domains did not show up.
Is there a better solution to blocking large numbers of domains and email addresses? Or is the transport rule the only option?

Since you do not want to crop your images to a square 1:1 aspect ratio changing the canvas to be square will not make your images square they will retain their Aspect Ratio and image size will be changer to fit within your 1020 px square. There will be a border or borders on a side or two borders on opposite sides. You do not need a script because Photoshop ships with a Plug-in script to be used in Actions. What is good about Plugins is the support Actions. When you record the action the plug-in during action recording records the setting you use in its dialog into the actions step. When the Action is played the Plug-in use the recorded setting an bypasses displaying its dialog. So the Action can be Batch. The Action you would record would have two Steps. Step 1 menu File>Automate>Fit Image... in the Fit Image dialog enter 1020 in the width and height fields. Step 2 Canvas size enter 1020 pixels in width and height not relative leave the anchor point centered it you want even borders on two sides set color to white in the canvas size dialog. You can batch the action.
The above script will also work. Its squares the document then re-sizes to 1020x1020 the action re-sizes the image to fit with in an area 1020 x 1020 then add any missing canvas. The script like the action only process one image so it would also need to be batched. Record the script into and action and batch the action. As the author wrote. The script re size canvas did not specify an anchor point so the default center anchor point is uses like the action canvas will be added to two sides.

Rman backup failure, and is generating a large number of files.

I would appreciate some pointers on this if possible, as I'm a bit of an rman novice.
Our rman backup logs indicated a failure and in the directory where it puts its files there appeared a large number of files for the 18th, which was the date of the failure. Previous days backups generated 5 files of moderate size. When it failed it generated between 30 - 40 G of files ( it looks like one for each database file ).
The full backup is early monday morning, and the rest incremental :
I have placed the rman log, the script and a the full directory file listing here : http://www.tinshed.plus.com/rman/
Thanks in advance - George
-rw-r----- 1 oracle dba 1073750016 Jan 18 00:03 database_f734055071_s244_s1
-rw-r----- 1 oracle dba 1073750016 Jan 18 00:03 database_f734055096_s245_s1
-rw-r----- 1 oracle dba 1073750016 Jan 18 00:03 database_f734573008_s281_s1
-rw-r----- 1 oracle dba 1073750016 Jan 18 00:03 database_f734055045_s243_s1
-rw-r----- 1 oracle dba 524296192 Jan 18 00:03 database_f734055121_s246_s1
-rw-r----- 1 oracle dba 1073750016 Jan 18 00:03 database_f734055020_s242_s1
-rw-r----- 1 oracle dba 4294975488 Jan 18 00:02 database_f734054454_s233_s1
-rw-r----- 1 oracle dba 4294975488 Jan 18 00:02 database_f734054519_s234_s1
-rw-r----- 1 oracle dba 4294975488 Jan 18 00:02 database_f734054595_s235_s1
-rw-r----- 1 oracle dba 4294975488 Jan 18 00:02 database_f734054660_s236_s1
-rw-r----- 1 oracle dba 4294975488 Jan 18 00:02 database_f734054725_s237_s1
-rw-r----- 1 oracle dba 4294975488 Jan 18 00:02 database_f734054790_s238_s1
-rw-r----- 1 oracle dba 209723392 Jan 18 00:02 database_f734055136_s247_s1
-rw-r----- 1 oracle dba 73408512 Jan 18 00:02 database_f734055143_s248_s1
-rw-r----- 1 oracle dba 67117056 Jan 18 00:02 database_f734055146_s249_s1
-rw-r----- 1 oracle dba 4194312192 Jan 18 00:02 database_f734054855_s239_s1
-rw-r----- 1 oracle dba 2147491840 Jan 18 00:02 database_f734054975_s241_s1
-rw-r----- 1 oracle dba 3221233664 Jan 18 00:02 database_f734054920_s240_s1
drwxr-xr-x 2 oracle dba 4096 Jan 18 00:00 logs
-rw-r----- 1 oracle dba 18710528 Jan 17 00:15 controlfile_c-1911789030-20110117-00
-rw-r----- 1 oracle dba 1343488 Jan 17 00:15 database_f740621746_s624_s1
-rw-r----- 1 oracle dba 2958848 Jan 17 00:15 database_f740621745_s623_s1
-rw-r----- 1 oracle dba 6415990784 Jan 17 00:15 database_f740620829_s622_s1
-rw-r----- 1 oracle dba 172391424 Jan 17 00:00 database_f740620814_s621_s1

george3 wrote:
Ok, perhaps its my understanding of RMAN that is at fault. From the logs :
Starting recover at 18-JAN-11
channel m1: starting incremental datafile backup set restore
channel m1: specifying datafile copies to recover
recovering datafile copy file number=00001
name=/exlibris1/rmanbackup/database_f734055020_s242_s1
recovering datafile copy file number=00002
name=/exlibris1/rmanbackup/database_f734055045_s243_s1
it seems to make backup copies of the datafiles every night, so the creation of these large files is normal ?Above results indicate that you have full (incremental level 0) backup(all datafiles copies ) and there happen update/recover (applying incremental level 1) backup.So there was happen applying */exlibris1/rmanbackup/database_f734055045_s243_s1* inremental backup to full(level 1) backup.And size should be normal
Why is it making copies of the datafiles even on days of incrementals ?
Because after getting level 1 backup and need applying and every day will apply one incremental backup.

Video recording has large number of dots and arrows over the recording

My iPod nano was delivered today.
I've just recorded some video but the recording has large number of dots and arrows in a grid pattern all over the recording. It's unusable. Anybody have similar experience?

Can't say that I have. Have you read the iPod nano (5th generation) - User Guide or gone through Knowledge Base for possible solutions?
Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase. _If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for *two years* from the original purchase date of your iPod.

ISE 1.2.0.899 and large number of alerts

Similar Messages

Maybe you are looking for