ISE 1.2.1 Complaining about High latency - can´t figure out why.

Hello! 
my 2 node (16 core, 32 GB Ram, SAN) ISE installation on VMWARE is, complaining about High latency. I have about 250 Test clients connected, and the VMWARE guys can´t seem to find anything wrong. Is there anyway to get a more detailed test WHAT actually is causing this high latency? CPU´s are idling, ram is at 2% and disk I/O is almost not messurable.. but the software is still complaining. (the Dashboard shows latency at 100+ ms) I think this might be the external CA, againt which the client certificates are run. but I don´t know if I can test this theorie! 
I have 2 Hardware Appliances coming, but I thought my Test enviroment should be more then enough to handel 250 clients.. I am abit concerned about the going live with 5000 clients in the future.. if it is already complaining with 250 active clients. 
and yes, I will be splitting the tasks up between the 2 Physical Boxes (Profiling and such) and the 2 VM Boxes (Management) but at the moment, for 250 clients the 2 VM´s should be enough. 

I have a couple of my customers complaining about this as well. I believe it is cosmetic and it is due to this bug CSCup97285
The suggested action for this alarm in ISE is:
Check if the system has sufficient resources, Check the actual amount of work on the system for example, no of authentications, profiler activity etc.., Add additional server to distribute the load
I have confirmed with both clients that the appropriate resources were allocated and reserved in VM. In addition, neither client is reporting any issues so this leads me to believe that it is just a cosmetic bug.
Thank you for rating helpful posts!

Similar Messages

  • Hi, I can't figure out why I can't render on my timeline. I highlight the segment hit "Apple-R" and it gives me a weird message about "conforming HDV video...." and the bar goes as far as 60-66% and holds there forever. It never renders even partially.

    Hi, I can't figure out why I can't render on my timeline. I highlight the segment hit "Apple-R" and it gives me a weird message about "conforming HDV video...." and the bar goes as far as 60-66% and holds there forever. It never renders even partially.

    Yes, I know. I have been working with HDV for some time. I am wondering why it doesn't render when it needs to.. the red and bright-green lines are above, and I've set the render settings such that ANYTHING I highlight and hit apple-R will render. But its not rendering at all.

  • I have purchased Adobe XI Pro and created a form for entering bowling scores to submit to newspaper for my high school team.  I can not figure out how to get pdf's into my documents folder on my iPad so that I can access the files in bowling alleys where

    I have purchased Adobe XI Pro and created a form for entering bowling scores to submit to newspaper for my high school team.  I can not figure out how to get pdf's into my documents folder on my iPad so that I can access the files in bowling alleys where I do not have a Wi-Fi connections.  I need to be able access files without going to acrobat.com.  Help!!!@

    Post the PDF files to a web site. The browse to them in Safari on the iPad.  When you Open the files specify the Open to occur in Adobe Reader.  Then you can have/Save them in your Documents folder on the iPad.   An iPad has limited access to files otherwise.

  • I can't get my applications to open to full screen. The apps are opening at about 75% and I cant figure out how to get them to open to the full screen.

    I cant get my applications to open to full screen. The apps are opening up to about 75% and i cant get them to extend to full screen.

    Which applications are you talking about? 
    Example: Browser application - At the bottom right corner of a browser window you will see a small square with 3 diagnal lines.  Place your cursor in that corner to stretch out your window to full screen.  The next time you open your browser app, the window will be full screen.

  • Can't figure out how to play high definition iTunes TV shows on my TV

    I bought a bunch of high definition TV shows from iTunes and when I tried to sync them to
    my fifth generation iPod so that I could watch them on my TV, iTunes refused to sync them, gave me the message that they weren't loaded because my iPod couldn't play them. I don't want to play them on my iPod, just want the files on my iPod so that I can connect it to my TV to watch them on my TV.
    So how the heck am I supposed to watch them on my TV?
    thanks,
    Erik

    I don't want to play them on my iPod, just want the files on my iPod so that I can connect it to my TV to watch them on my TV.
    Yes, you are trying to play them on your iPod and display them on your television.
    See this -> Can't transfer videos to iPod
    "Note: HD content cannot be synced to an iPod. When trying to sync HD content to your device, you will see a prompt like the one above stating that the file was not copied to your iPod because it cannot be played on your iPod."

  • Keep getting firefox not responding for about 2 months now Can any one help me figure out why and fix this?

    I'm using windows 7 64 bit system, for past 2 months keep randomly getting firefox not responding. Wait about 10-20 seconds for all tabs to respond.

    This is a bad hardware error, Baseband Error. Some have reported getting through this error by Restoring iPhone with the SIM Card removed. Try that. Try restoring with different computer. Search Web some more for other thoughts.

  • One of my kids submitted their friends email as our verification email if anything needs changed so now I am not getting emails about my questions.  I can not figure out where to find it to edit it

    Somehow my security answers are not correct.  So, I submitted to have the answers send to me and they are going to another e-mail address that I don't have access to.  I can't find it in my account to edit it though.  Anyone know where I can find it to change it?

    From a Kappy  post
    The Three Best Alternatives for Security Questions and Rescue Mail
       1. Use Apple's Express Lane.
    Go to https://expresslane.apple.com ; click 'See all products and services' at the
    bottom of the page. In the next page click 'More Products and Services, then
    'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
    ID security questions' and click 'Continue'. Please be patient waiting for the return
    phone call. It will come in time depending on how heavily the servers are being hit.
    2.  Call Apple Support in your country: Customer Service: Contact Apple support.
    3.  Rescue email address and how to reset Apple ID security questions.
    A substitute for using the security questions is to use 2-step verification:
    Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

  • I can't figure out how to get my music to shuffle on my iPhone 5s. If I try to skip a song, it skips about 100 songs. It only ends up playing 4 or 5 songs then goes back to the song menu. Help please!

    I can't figure out how to get the music on my iPhone5s to shuffle. If I use the arrows to skip a song, it shuffles through a handful of the same songs then goes back to the song menu. Help please!

    Un-sync all your music to remove it from the device, then restart (hold down the home button along with the sleep/wake button until you see the apple, then let go). Now re-sync your music.

  • I am having problems with my optical corded mouse that came with my iMac (it's about 2 years old) It stops working periodically, and I can't figure out how to fix it; doesn't look like I can open it to clean it, or anything like that.

    My corded optical mouse (model A 1152),which came with my desktop  iMac, stops working periodically.  The little tracball may work scrolling down a page, but not up, sometimes, and I have yet to figure out how to fix it, or why it happens at all.  Is there someone who has had that problem, and what did you do?

    Hello:
    Turn the mouse upside down and run it (vigorously) over a piece of paper.  Better yet, run it over a microfiber cloth.
    Barry

  • SortByTime method complains trying to figure out why help please

    public void sortByTime()
    // check out the bubble sort code in Module 11 for an
    // example of what to do in this method
    // your code here (please remove this line)
    double fastRat = -1;
    int last = this.getSize() - 1;
    boolean didSwap = true;
    Time ratDifference = null;
    //MazeResult topRat = null;
    MazeResult tmpRat = null;
    double totalSeconds = 0;
    //int j = 0;
    while (didSwap)
    last--;
    didSwap = false;
    for (int i = 0; i < last; i++)
    ratDifference = tmpRat.getStartTime() // java.lang.NullPointPointerException
    .getDiff(tmpRat.getEndTime());
    totalSeconds = totalSeconds + ratDifference.getHour() * 3600;
    totalSeconds = totalSeconds + ratDifference.getMinutes() * 60;
    totalSeconds = totalSeconds + ratDifference.getSeconds();
    if (fastRat < 0)
    //didSwap = true;
    //int temp = ; x[i] = x[i+1]; x[i+1] = temp;
    didSwap = true;
    --last;
    }java.lang.NullPointPointerException keep geting this
    test classpublic void testSortByTime()
    // Presort results
    MazeResult mazeResultObj = collection1.getMazeResult(0);
    assertNotNull(mazeResultObj.getRat());
    assertNotNull(mazeResultObj.getStartTime());
    assertEquals("01:15:30", mazeResultObj.getMazeTime());
    mazeResultObj = collection1.getMazeResult(1);
    assertEquals("01:10:15", mazeResultObj.getMazeTime());
    mazeResultObj = collection1.getMazeResult(2);
    assertEquals("01:01:45", mazeResultObj.getMazeTime());
    mazeResultObj = collection1.getMazeResult(3);
    assertEquals("00:50:00", mazeResultObj.getMazeTime());
    mazeResultObj = collection1.getMazeResult(4);
    assertEquals("00:57:30", mazeResultObj.getMazeTime());
    mazeResultObj = collection1.getMazeResult(5);
    assertEquals("01:20:45", mazeResultObj.getMazeTime());
    mazeResultObj = collection1.getMazeResult(6);
    assertEquals("01:00:05", mazeResultObj.getMazeTime());
    collection1.sortByTime();// Post sort results
    mazeResultObj = collection1.getMazeResult(0);
    assertEquals("00:50:00", mazeResultObj.getMazeTime());
    mazeResultObj = collection1.getMazeResult(1);
    assertEquals("00:57:30", mazeResultObj.getMazeTime());
    mazeResultObj = collection1.getMazeResult(2);
    assertEquals("01:00:05", mazeResultObj.getMazeTime());
    mazeResultObj = collection1.getMazeResult(3);
    assertEquals("01:01:45", mazeResultObj.getMazeTime());
    mazeResultObj = collection1.getMazeResult(4);
    assertEquals("01:10:15", mazeResultObj.getMazeTime());
    mazeResultObj = collection1.getMazeResult(5);
    assertEquals("01:15:30", mazeResultObj.getMazeTime());
    mazeResultObj = collection1.getMazeResult(6);
    assertEquals("01:20:45", mazeResultObj.getMazeTime());
    }I keep getting this java.lang.NullPointPointerException                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    public void sortByTime()
    // check out the bubble sort code in Module 11 for an
    // example of what to do in this method
    // your code here (please remove this line)
    double fastRat = -1;
    int last = this.getSize() - 1;
    boolean didSwap = true;
    Time ratDifference = null;
    //MazeResult topRat = null;
    MazeResult tmpRat = null;
    double totalSeconds = 0;
    //int j = 0;
    while (didSwap)
    last--;
    didSwap = false;
    for (int i = 0; i < last; i++)
    ratDifference = tmpRat.getStartTime() // java.lang.NullPointPointerException.getDiff(tmpRat.getEndTime());
    totalSeconds = totalSeconds ratDifference.getHour() 3600;
    totalSeconds = totalSeconds ratDifference.getMinutes() 60;
    totalSeconds = totalSeconds + ratDifference.getSeconds();
    if (fastRat < 0)
    //didSwap = true;
    //int temp = ; x[i] = x[i+1]; x[i+1] = temp;
    didSwap = true;
    --last;
    java.lang.NullPointPointerException keep geting this
    test class
    public void testSortByTime()
    // Presort results
    MazeResult mazeResultObj = collection1.getMazeResult(0);
    assertNotNull(mazeResultObj.getRat());
    assertNotNull(mazeResultObj.getStartTime());
    assertEquals("01:15:30", mazeResultObj.getMazeTime());
    mazeResultObj = collection1.getMazeResult(1);
    assertEquals("01:10:15", mazeResultObj.getMazeTime());
    mazeResultObj = collection1.getMazeResult(2);
    assertEquals("01:01:45", mazeResultObj.getMazeTime());
    mazeResultObj = collection1.getMazeResult(3);
    assertEquals("00:50:00", mazeResultObj.getMazeTime());
    mazeResultObj = collection1.getMazeResult(4);
    assertEquals("00:57:30", mazeResultObj.getMazeTime());
    mazeResultObj = collection1.getMazeResult(5);
    assertEquals("01:20:45", mazeResultObj.getMazeTime());
    mazeResultObj = collection1.getMazeResult(6);
    assertEquals("01:00:05", mazeResultObj.getMazeTime());
    collection1.sortByTime(); \\keep getting this java.lang.NullPointPointerException // Post sort results
    mazeResultObj = collection1.getMazeResult(0);
    assertEquals("00:50:00", mazeResultObj.getMazeTime());
    mazeResultObj = collection1.getMazeResult(1);
    assertEquals("00:57:30", mazeResultObj.getMazeTime());
    mazeResultObj = collection1.getMazeResult(2);
    assertEquals("01:00:05", mazeResultObj.getMazeTime());
    mazeResultObj = collection1.getMazeResult(3);
    assertEquals("01:01:45", mazeResultObj.getMazeTime());
    mazeResultObj = collection1.getMazeResult(4);
    assertEquals("01:10:15", mazeResultObj.getMazeTime());
    mazeResultObj = collection1.getMazeResult(5);
    assertEquals("01:15:30", mazeResultObj.getMazeTime());
    mazeResultObj = collection1.getMazeResult(6);
    assertEquals("01:20:45", mazeResultObj.getMazeTime());
    }I keep getting this java.lang.NullPointPointerException                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Top 2 inches of the window does not respond. tool bar works fine, just nothing below the toolbar for about two inches, can't log out of email or facebook. can't click to new links in that area. Explorer works fine, just started yesterday 10-25-11

    no responses to any hyperlinks or buttons in this area. any button or hyperlinks that scroll into this area go dead as well, and when you scroll down they work fine. reduced the window but still does it.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • HT6154 New Battery replaced for iphone4, got a diagnostic and its NOT the battery it drains horrible by itself, i barely use my phone. HELP im about to erase everything to figure out the prob!

    Drains really bad, i've tried everything like deleting apps, turning off stuff, turning off notifications, downloaded the app battery monitor etc nothing is working.

    Unless Apple replaced your battery, and it appears they didn't, you're pretty much on your own now. Have you tried going back to whoever replaced your battery? That's gonna be your only choice now, because if a third-party replaced your battery, Apple won't touch your phone now.

  • TS1702 I do not have iOS 5 on my iPad and I can not figure out how 2 download it from iTunes store. I type in ios5 n there is just info about it but not the app. Help

    I do not have ios5 on my iPad and I can not seem 2 find the iTunes app so I can download it. I am very frustrated. Can someone help me please?

    You don't download it from the iTunes app. Read:
    iOS 4: Updating your device to iOS 5 or later
    If you have an iPad 2 or the new iPad it will be updated to iOS 6.

  • Reader opens in a highly magnified window, the toolbar is huge! Causes problems in the Print dialogue box, too. I can't figure out what I've done to make this happen, or how to undo it. Windows 8.1RT, MS Surface Pro3. Have re-installed too.

    FIGURED IT OUT MYSELF!! It's when the Surface Pro is connected to a monitor, and the screen resolution has altered. Disconnecting the second screen puts everyting back to how it should be. Phew.

    FIGURED IT OUT MYSELF!! It's when the Surface Pro is connected to a monitor, and the screen resolution has altered. Disconnecting the second screen puts everyting back to how it should be. Phew.

  • Why does my 10GB iSCSI setup seem see such high latency and how can I fix it?

    I have a iscsi server setup with the following configuration
    Dell R510
    Perc H700 Raid controller
    Windows Server 2012 R2
    Intel Ethernet X520 10Gb
    12 near line SAS drives
    I have tried both Starwind and the built in Server 2012 iscsi software but see similar results.  I am currently running the latest version of starwinds free
    iscsi server.
    I have connected it to a HP 8212 10Gb port which is also connected via 10Gb to our vmware servers.  I have a dedicated vlan just for iscsi and have enabled
    jumbo frames on the vlan.
    I frequently see very high latency on my iscsi storage.  So much so that it can timeout or hang vmware.  I am not sure why.  I can run IOmeter and
    get some pretty decent results.
    I am trying to determine why I see such high latency 100'ms.  It doesn't seem to always happen, but several times throughout the day, vmware is complaining
    about the latency of the datastore.  I have a 10Gb iscsi connection between the servers.  I wouldn't expect the disks to be able to max that out.  The highest I could see when running IO meter was around 5Gb.  I also don't see much load
    at all on the iscsi server when I see the high latency.  It seems network related, but I am not sure what settings I could check.  The 10Gb connect should be plenty as I said and it is no where near maxing that out.
    Any thoughts about any configuration changes I could make to my vmware enviroment, network card settings or any ideas on where I can troubleshoot this.  I
    am not able to find what is causing it.  I reference this document and for changes to my iscsi settings 
    http://en.community.dell.com/techcenter/extras/m/white_papers/20403565.aspx
    Thank you for your time.

    I have a iscsi server setup with the following configuration
    Dell R510
    Perc H700 Raid controller
    Windows Server 2012 R2
    Intel Ethernet X520 10Gb
    12 near line SAS drives
    I have tried both Starwind and the built in Server 2012 iscsi software but see similar results.  I am currently running the latest version of starwinds free
    iscsi server.
    I have connected it to a HP 8212 10Gb port which is also connected via 10Gb to our vmware servers.  I have a dedicated vlan just for iscsi and have enabled
    jumbo frames on the vlan.
    I frequently see very high latency on my iscsi storage.  So much so that it can timeout or hang vmware.  I am not sure why.  I can run IOmeter and
    get some pretty decent results.
    I am trying to determine why I see such high latency 100'ms.  It doesn't seem to always happen, but several times throughout the day, vmware is complaining
    about the latency of the datastore.  I have a 10Gb iscsi connection between the servers.  I wouldn't expect the disks to be able to max that out.  The highest I could see when running IO meter was around 5Gb.  I also don't see much load
    at all on the iscsi server when I see the high latency.  It seems network related, but I am not sure what settings I could check.  The 10Gb connect should be plenty as I said and it is no where near maxing that out.
    Any thoughts about any configuration changes I could make to my vmware enviroment, network card settings or any ideas on where I can troubleshoot this.  I
    am not able to find what is causing it.  I reference this document and for changes to my iscsi settings 
    http://en.community.dell.com/techcenter/extras/m/white_papers/20403565.aspx
    Thank you for your time.
    If both StarWind and MSFT target show the same numbers I can guess it's network configuration issue. Anything higher then 30 ms is a nightmare :( Did you properly tune your network stacks? What numbers (x-put and latency) you get for raw TCP numbers (NTtcp
    and Iperf are handy to show)?
    StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

Maybe you are looking for