Ise 1.2 Device Registration not auto filling the MAC field

Hello
I have installed 1.2 and when guests login, they get the new (not improved imo) device registration portal, but the field where they have to enter the MAC adress is empty, I can remember it was prefilled in previous ISE versions.
Is this normal beheavior on 1.2? I have configured calling station ID on MAC instead of IP, any other things that I need to configure to get this working?
90% of the users doesnt know what a MAC adress is, or where to find it.
Greetings
Steven

Peter, I am glad you like my slides (although not sure I ever published this version outside Cisco!).
Steven, It sounds like you have enabled the option in the Guest Portal to allows Device Registration.  This option is intended to be used by Guest accounts only and does NOT support auto-populate of MAC address.  This was a very limited feature introduced in 1.0.
This feature should not be confused with the DRW or NSP flows for device registration.  For the purposes of device registration with web auth, both CWA+DRW and CWA+NSP flows are working in ISE 1.2 Patch 7.  However, CWA+NSP flow will not work for guest user accounts if enable the Supplicant Provisioning option in the web portal. The intent of the NSP flow is for employee accounts doing BYOD, and not for guest users.  That said, it will still work if redirect successfully authenticated guest users to NSP using the Network_Access:UseCase=Guest_Flow condition (and optional match on Guest role).
I would recommend CWA+DRW option for Guest users as it is simpler, more streamlined, and you can specify a unique Identity Group such as "GuestEndpoints" to these devices.  This makes future cleanup easier and maintains them separately from employee RegisteredDevices.  ISE 1.2 ERS API can be used to programmatically  to delete these endpoints periodically.
Hope that helps to clarify.

Similar Messages

  • I have LastPass running on a desktop PC. I just bought a new Laptop, Win 7, I can open the Vault on the laptop, but it will not auto fill the site logins Firefox is running on both computers.both

    I have LastPass running on a desktop PC. I just bought a new Laptop, Win 7, I can open the Vault on the laptop, but it will not auto fill the site logins Firefox is running on both computers

    Hi,
    Please try this: Firefox '''Tools''' ('''Alt''' + '''T''') > '''Add-ons''' > '''Extensions''' (on the left), click '''Options''' for LastPass > '''General''', enable '''Automatically Fill Login Information'''. If a site has more than one entries, you can set the preferred login in the vault by right-clicking the preferred entry > '''Edit''' and enable '''AutoLogin'''.
    [https://lastpass.com/support.php LastPass support]

  • How do i keep only the name of a month in a cell in Numbers and not have it auto fill the date and time?

    how do i keep only the name of a month in a cell in Numbers and not have it auto fill the date and time?

    Hi JN and Barry,
    Barry wrote:
    The second case may not be included in the available D&T formats in Numbers 3
    For my region, the Date & Time data formats include month.
    The Date Pop-Up
    This may not be the case for all regions.
    Remember that the month is only the display, and the Full Date & Time is still there. If I change the format to reveal what is behind the curtain:
    Regards,
    Ian.

  • I have a user on Adobe Reader X.  whenever they open a .pdf file, the form fields do not auto-fill u

    I have a user on Adobe Reader X.  whenever they open a .pdf file, the form fields do not auto-fill until you click in the box.  Is there a setting that can be changed to make the form open properly?

    Sounds like the form fields were filled in on a Mac using Mac Preview. This cannot be fixed in Reader only Acrobat. Ask the person who filled in the form to redo their work in Adobe Reader.

  • Passwords not auto-filling

    Hello All,
    My passwords are no longer "auto-filling" the log-in fields as they used to.
    Could this be a result of my Options/Privacy/Clear History When Firefox Closes setting?? In addition, in the Options/Privacy/Settings/settings for clearing history options I have Browsing History, Download History, Cache and Cookies all checked.
    Somehow I'm missing something...
    Many thanks in advance....

    @cor-el,
    I started in safe mode and FireFox v.12 still will NOT fill in passwords.
    Fills in username no problem but will NOT fill in passwords.
    signon.autofillForms set to true
    NOT using private
    do NOT clear anything when shut down

  • Why Safari 6.0 will not auto complete the password ?

    Why Safari 6.0 will not auto complete the password ? even when the option is selected in autofill tab, and the user-password are listed in the password tab ?
    It used to work fine before I upgraded to mountain lion.
      Tks

    Same problem for me since upgrading to ML.  Safari remembers autofills for some passwords but not others.  For example my web mail password was no longer auto filled.  Checked in the keychain list and all the info was there. Therefore I deleted this and tried again - but Safari did not offer to remember the password.  Than ran an old script I had that is designed to "Removed autocomplete=off from 0 forms and from 2 form elements, and removed onsubmit from 0 forms. After you type your password and submit the form, the browser will offer to remember your password." Safari then offered to remember the password.  I accepted this and checked that the password was then saved in keychain - it was. However, next time I tried to access the email Safari once more did not auto complete.  Very frustrating, especially as some auto completes do work.  I hope apple sort this out soon.

  • PCI DIO 32HS (6533) Suddenly giving "The device is not responding to the first IRQ level" error, and no longer functioning.

    Greetings NI folks,
      I'm an oceanographer, and have an sidescan sonar data aquasition computer running Windows XP SP2, and NiDAQ 7.0 (Legacy). For several years, this machine has worked flawlessly, but today, I booted it up to test the system for an upcoming job, and I got some strange errors in our sonar program. I tranced the problem to our NI-6533 PCI-DIO-32HS card. I launched NI Automation Explorer to test that the card was responsive, and when I click the "test panel", I get an error: "The device is not responding to the first IRQ level." Continue (yes/no). If I click yes, I can test the digital i/o's, but nothing happens, and all the tests fail (nonresponsive). I tried moving the card to another PCI slot, tried forcing it to have a specific IRQ that was unused by anything else, and finally tried moving it to another computer that had never been used with the DIO card. I'm still getting the error, and the card is nonresponsive. I'm at the limit of my abilities, and would like to know if there's anything else I can do, or should we send the card back to NI for repair/diagnosis.
    Thanks.

    Duplicate Post
    Best Regards
    Hani R.
    Applications Engineer
    National Instruments

  • My iphone was stolen so I decided to delete my device in find my iphone,  but the it has not yet been deleted bec the device is not connected to the internet yet. Can I undo my changes before it will be deleted from icloud? Thank you

    Hi Suport,
    My iphone was stolen yesterday so I decided to delete my device in find my iphone,  but the it has not yet been deleted bec the device is not connected to the internet yet. Can I undo my changes before it will be deleted from icloud? I want to undo the changes because I may find my phone when it connects to the internet. Thank you
    See image below:
    email is [email protected] for questions thank you Apple. I hope you could help me.

    Sorry, you can't undo your action remotely.

  • AT-MIO-16XE-50 device is not responding to the selected base address

    I'm trying to install my AT-MIO-16XE-50 DAQ board onto my Windows NT desktop computer, but I'm having trouble.
    Here's what I've done: I've installed LabView 5.1 and the NIDAQ 7.0 software onto my computer first. Then I've physically installed the DAQ board into my computer. After starting the computer, the plug-and-play system seems to recognize the new hardware and install drivers for it. It then says I need to reboot the computer, so I reboot the computer.
    When I then look at my device manager, it lists AT-MIO-16XE-50 twice. Under the properties/resources tab, one of them lists "input/output range", "interrupt request", "direct memory access", and "direct memory access" (i.e., 2 "direct memory access"s). The second one only lists "direct memory access" once and nothing else under the properties/resources tab. Also, the first one says that it is working properly while the second one says that it is not working properly (Code 10). I've played around with chaging the "direct
    memory access" numbers and after rebooting the computer have gotten both AT-MIO-16XE-50's in the device manager to say that they're working properly. So, now the DAQ board appears to be installed correctly, because the device manager reports no problems with it. However, there are still 2 of them. My first question is this: should there be only 1 entry in the device manager list, or are there supposed to be the 2 that I see? The entries do appear to be different from each other, but they're for the same device, so that's a little confusing.
    When I open my Measurement and Automation explorer, only one AT-MIO-16XE-50 device is listed (so this looks good), and under "properties" all 3 "direct memory access" numbers are listed. So, this all seems good. But, when I click on "test resources" or "test panel", I get an error message saying that "the device is not responding to the selected base address". Considering that this device was plug-and-play, and I did not set the base address manually, I don't understand why I'm getting this error message.
    What I've tried is to change the "input/output range" number by using the device manager. I've tried a few different settings (rebooting the computer after each change) and none of the different "input/output range" settings seem to work.
    I'd appreciate it if you could give me any help on figuring out how to resolve this "not responding to base address" problem. The info on your web site
    appears to suggest flipping dip-switches on the DAQ card, but my card does not have any dip switches because it is plug-and-play. So, right now I'm
    clueless! Thanks for reading this, and I hope that you have more insight than I do.

    Smaria,
    The AT-MIO-16XE-50 shows up twice in the Device Manager because it reserves three DMA channels, and the ISA bus only allows two DMA channels per ISA slot. You mentioned that you were able to get both devices working properly in the Device Manager. Below is a link to a KnowledgeBase that describes the proper procedure to successfully accomplish this. You should verify that this is the procedure you followed:
    Exclamation Mark Appears with Error Code 10 on Windows XP/2000/98 After Installing AT-MIO-16E-10
    Spencer S.

  • My ipad is not being seen by itunes in Windows 7. I uninstalled then reinstalled itunes it started working for a while then it stopped. I get a message stating that the device is not recognized or the device is defective replace device. Anyone have a fix.

    My ipad is not being seen by itunes in Windows 7. I uninstalled then reinstalled itunes it started working for a while then it stopped. I get a message stating that the device is not recognized or the device is defective replace device. Anyone have a fix.

    At present I have no power to the Gen 7, so need to get some power to it I think.  I pressed the buttons as you suggested, but nothing is showing up at this point.  Thank you for your response as the more I can rule out before  I take it back the better I think.

  • The device is not responding to the first IRQ level

    I am using a DAQCard 700 with a NIDAQ 6.9.3 driver on a windows XP. When I install the card and run the configuration uitillity (MAX) and push the test resources button, the computer hangs and responds to no input (not even ctrl-alt-del). When I push out the PCMCIA card the error message: The device is not responding to the first IRQ level. Anybody that has an answer?

    Hi PhilV,
    It looks like you had an old AT board in a computer and then the power supply went out and you evidently also changed computers to a device with Windows NT.  Now that you're in the new computer there appears to be some sort of IRQ conflict that is preventing the board from working.
    In the past when I've seen this issue and all of the proper steps have been taken to troubleshoot it, the problem is often that the board died between the last use and the current use.  However, it's not always the case, so here are a few other options.
    First make sure that you have Traditional DAQ 7.4.1 (if you have LabVIEW 7.0-8.0 or are doing text-based programming) or Traditional DAQ 6.9.3 (if you are using LabVIEW 5-6.1).  Then make sure that you followed the installation procedure outlined here: Product Manual: AT E Series User Manual (Chapter 2)
    I did a quick search on ni.com for "device not respond base address" and "irq isa" and found some of the following KnowledgeBases and links that should help you properly troubleshoot the device.
    "Not Responding to the Selected Base Address" Error
    Troubleshooting Plug and Play Devices for Windows NT 4.0
    My PC Doesn't Have Enough Interrupt (IRQ) and DMA Channels to Support the Hardware I Want to Install
    There have been a lot of advances in DAQ boards since the old AT days, so with newer devices and computers issues like this are rarely seen.  Hopefully though, the device you have is not broken and we will be able to find out what is wrong with it right now.
    Regards,
    Otis
    Training and Certification
    Product Support Engineer
    National Instruments

  • TS1398 when i update my software to 6.1.3(10B329)to I phone 4s the wifi is not working and not auto join the network that i have already connected to

    when i update my software to 6.1.3(10B329)to I phone 4s the wifi is not working and not auto join the network that i have already connected to

    First, grow up.  Just because YOUR phone isn't working, doesn't mean Apple put out bad software.  I've not had any difficulty, nor has anyone else I know.  And just how is Apple risking lives with Bluetooth kits not working?  It's YOUR decision to talk on the phone or text and drive.  Not Apple's.
    We're users here, volunteering our time to help others.  Posts like yours, which are whiny and ranting, simply means we're likely to ignore you and not provide you with any help.  Not to mention, it makes you look absolutely foolish.
    Further making you look foolish is the fact that you haven't even asked a technical support question, nor have you provided anyone here with any troubleshooting steps you might have taken, including those recommended in the user guide.
    Good luck getting help.
    GDG

  • Auto fill the goods' storage location in sales order item

    Hi,
    I have a issue,When I use VA01 to create a sales order,I want to let the system auto fill the material storage location when I enter the material no. for the sales ITEM.
    How to do?I want use the userexit to do,the program 'MV45ATZZ' but I couldn't find where I can add my  code,Whether have other better way to do?
    Thanks

    Sorry,I use this user exit program 'MV45AFZZ'.
    source code like below,
    FORM USEREXIT_MOVE_FIELD_TO_VBAP.
    VBAP-zzfield = xxxx-zzfield2.
    *{   INSERT         KHDK900234                                        1
          If SVBAP-TABIX = 0.
         SELECT SINGLE LGORT FROM MARD INTO VBAP-LGORT
                              WHERE MATNR = VBAP-MATNR .
          endif.
    *}   INSERT
    ENDFORM.

  • Where is the photo tab on itunes? My device is not listed on the left side of my screen and there is no photos tab on the right of my screen. I want to delete photo albums that were synced through itunes to my ipad 3.

    I synced several photo albums to my iPad 3  from my computer through iTunes. Now, I would like to remove them and have discovered that they cannot be removed except through using iTunes. Instructions that I've read say that once the device is connected to and selected from the list in iTunes, select the Photo Tab and then the folder that contains the photos etc.  I never get that far because I do not have a Photo Tab to select in iTunes. How do I find this illusive tab so that I can delete these albums that are merely duplications of other pictures and are just occupying space. I need to get rid of them. Can anyone help me find the photo tab. I cannot move past that step until I do. Also, my device is not listed on the left side as stated in the instructions. It's in the bar on the upper right area of my screen and is automatically selected when connected. I am using the current version 11.1 for iTunes and IOS 7 on my iPad 3, if that helps.

    I have the same problem on the latest iTunes software and Windows 7. My window is maximzed and I do not see any tab for photos. Seems related to a recent update (IOS7?) as this was there - at least before the very big change to the interface.

  • When I connect my ipod touch tomy computer it says that the device will not work because the Apple mobile device hasnt been activated?

    Why does a meesage pop up when I connect my iPod touch saying that the device will not work because the Apple mobile device hasn't been activated?          

    Refer to this article to restart AMDS:
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/TS1567

Maybe you are looking for