ISE 1.2 patch 5 My devices portal not showing regsitered devices
Hello Guys,
I am running ISE 1.2 with all recent patches installed. I have a weird issue where AD users login to mydevices portal and are not able to view any of their registered devices. even thou the devices were successfully registered and onboarded.
Check your synchronization between your ise nodes, i had a similar issue, that was because ntp had been down for a while, and then the nodes didn't sync the device registrations, and guest users between the nodes.
Similar Messages
-
Yesterday I reset my settings on my iphone 4 to correct a problem. Today I am unable to connect to itunes to sync my phone. The device does not show up on the screen. What can I do?
Best practices says plug the USB cable into the computer, then plug the 30 pin connector into the iPhone.
If everything is working correctly, you should be able to plug the iPhone in at any time. Before or after opening iTunes.
Depending on what settings are selected in iTunes, the program may or may not automatically open when you connect the device. -
How come whenever i plug my iPhone 5 into the computer the device will not show up on my itunes. This is the first time that i have done it since i updated to iOS7 and before i had no problem but now it just wont work.
Hi Celia51510,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
I can't tell from your post if you are using a Windows or a Mac Computer.
Try deleting the iTunes application and redownloading the version you need below:
iTunes 11.1 Download for Mac
http://support.apple.com/kb/DL1614
iTunes 11.1 for Windows (64-bit)
http://support.apple.com/kb/DL1615
Cheers,
- Judy -
Some Devices are not showing up at all in the Discovery reports
Hi all,
The first time I ran the CS device discovery I got 50 reachable devices. I scheduled the Device Discovery to be run every week. I added more subnets to the discovery but unfortunately the last discovery shows only 31 devices from the first discovered devices (50). I checked the DCR and there is only 44 devices out of the 50!
My question is:
Should not the scheduled Device Discovery discovers all devices -the previously discovered ones and the new ones-?
Why the rest of the devices are not showing up at all in the discovery reports (neither reachable nor unreachable) although all of them are pingable and responding to the snmpwalk tool from the CWLMS server.
Your kindly respond is highly appreciated.
Thanks in advance.I ran the discovery again with the same settings after enabling debugging and I checked the following log files:
1. in the ngdiscovery.log I found a lot of errors all about Duplicate IpAddress example:
ERROR [DeviceManager : EvalTask-DiscoveryThreadPool-06 addNewDevice] : Duplicate IpAddress (127.0.0.51) found in addNewDevice().Device 1 ip = 10.8.113.29 , id1 = 127.0.0.51*F1COR.xyz.com*.1.3.6.1.4.1.9.1.283, Device 2 ip = 10.8.113.106 , id2 = 127.0.0.51*LCD.xyz.com*.1.3.6.1.4.1.9.1.283
ERROR [DeviceManager : EvalTask-DiscoveryThreadPool-08 updateDevice] : Duplicate IpAddress (127.0.0.51) found in updateDevice().Device 1 ip = 10.8.113.93 , id1 = 127.0.0.51*UDS.xyz.com*.1.3.6.1.4.1.9.1.283, Device 2 ip = 10.8.113.73 , id2 = 127.0.0.51*F2COR.xyz.com*.1.3.6.1.4.1.9.1.283
ERROR [DeviceManager : EvalTask-DiscoveryThreadPool-09 addNewDevice] : Duplicate IpAddress (10.8.113.42) found in addNewDevice().Device 1 ip = 10.8.113.42 , id1 = null, Device 2 ip = 10.8.113.86 , id2 = 10.8.118.251*OPS.xyz.sa*.1.3.6.1.4.1.9.1.501
2. in the CSDiscovery.log:
Error while changing the permission of the file C:\PROGRA~1\CSCOpx\objects\csdiscovery\1348\DiscoveryStatusObj
I checked the file and the casusers has a Modify permission
My Question is:
1. what is the meaning of those output exactly?
2. If CWLMS found duplicatedd IP address how it works in terms of (ignoring, updating existing devices, Adding the new devices, ... etc)
Many thanks for your help. -
I can't synch my iPhone with iTunes because the device does not show up in a device window when I plug it in...it's missing in action and thus I'm not able to add any content from the iTunes to my iPhone, e.g. podcasts. All the instructions on synching start with "find your device in the device window". But what if you have no device window?
Missing "message" from above: The iPad "DGMTR" is synced with another iTunes library on DGMTR's MacBook Pro. Do you want to erase this iPad and sync with this iTunes library? An iPad can be synched with only one iTunes library at a time. Erasing and syncing replaces the contents of this iTunes library.
I thought the libraries were the same. -
My devices are not showing up on my itunes. How do i fix this?
My devices are not showing up on my itunes to sync. how do i fix this?
Why is this answer being accepted by users? Am I supposed to restart my Mac EVERY TIME I want to sync my iPhone, iPad or iPod?
Has anyone found a solution to this problem? I see this question in the Apple Support forums quite frequently, and the answer always boils down to 'http://support.apple.com/kb/TS1591' - Which - after exhausting the obvious, you've got a bad cable or bad USB port checklist - recommends that you 'Restart your Mac' to resolve the issue.
That's not an adequate or acceptable answer - If Apple is ignoring this question, then they're the ones with a 'Problem' - Ignoring these obvious issues (this isn't a bad cable / bad USB port problem) is only going to lead to a loss of customers. I'm certain that Apple has the technical expertise to investigate and resolve the underlying issue. The real question is 'does Apple still value the customer'?
My iTunes (11.1.4) has stopped recognizing Devices (an iPad 2, an iPhone 5S, an iPod classic). This has been going on for about a month now (since 11.1.4?). Yes, I have the current OS (OS 10.9.1), yes my iDevice has the most recent iOS (just updated to 7.0.6 (1.1.2 for 160GB iPod Classic), yes my USB 3.0 ports work (after I reboot the computer). The syncing and connectivity works fine (with all my devices/cables/USB ports) until I disconnect my device - What good is my mobile device if I have to leave it tethered to my Mac in order to use it? -
TS1424 Apple Mobile device does not show up after installing 10.0.7.21
Receive message "Apple Device not started". Apple Device does not show up in Adminstrative Tools, Services. Windows 7 64bit, IOS6.0.1.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if a component such as Apple Mobile Device Support won't install normally.
tt2 -
While updating ipod touch we now have a blank screen. I have updated itunes but am unable to sync because the ipod does not show under devices. I have tried shuttng down and restarting but only have a blank screen or ap0ple logo. Sometimes the screen shows connect to itunes but that has been it.
I have the same problem, after upgrading my itouch to iOS6, it doesNOT respond to anything, apple logo stays on the screen all the time and does NOTHING! restore does not work either.... i hope we can get an answer from someone soon... apple support did not have an asnwer.
-
ipod nano 7th generation will not sysc with i tunes is updated , device does not show up in itunes under devices but shows itself in explorer.ran diagnostics failed sync. about ready to take this back to best buy.
yes i have a solution to my problem only because of a recent phone call from apple they were great.......... in the right hand side of itunes my i pod was displayed. click on the ipod symbol........at the top of the page you will see summary,,,,,,music,,,,,,movies,,,,,,tvshow,,,,,,photo,,,,,on this ipod.
click on music check mark music done and sync
problem solved
thanks apple -
I've just updated my iTunes on my laptop
And when i plug my iPhone in, nothing happens and the device does not show up in iTunes
I have tried numerous cables, uninstalling and re-installing iTunes and searching for devices on iTunes
And i still have no luck
help!Pick the appropriate one of these for advice:
Windows - http://support.apple.com/kb/ts1538
Mac - http://support.apple.com/kb/ts1591 -
Help! When i connect my "iomega" External hard drive to my mac it does not show in devices or on the desktop, how can i access my hard drive?
what format your iomega HD is it NTFS , if NTFS try download http://www.apple.com/downloads/macosx/system_disk_utilities/ntfs3g.html
-
Devices are not showing up in Finder sidebar
All of a sudden attached devices are not showing up in the sidebar in finder nor on the desktop, have already checked Finder prefs and are all set correctly.
Cant access files on attached hard drive and cant dismount. Upon pulling the plug I get the warning about not ejecting the device first.Try relaunching the Finder ...
Hold down Option key and right click on Finder’s Dock icon, then select “Relaunch”. -
After upgrade to ios 6, iphone 4 is not wroking, It suddenly stops responding to any actions. Today it totally stopped and is nothing working. Connected to itunes and the device does not shows up. Please help
Please turn off your caps lock.
All caps indicates shouting, is considered rude and is difficult to read. Many will not read such posts.
If you are unable to restore your iphone then try this:
iOS: Unable to update or restore -
TS4006 Device does not appear in device list
Device does not appear on device list
Welcome to the Apple Support Communities
It happens when you haven't registered that device in Find my iPhone. In the device you want to use with Find my iPhone, log in iCloud following these steps > http://www.apple.com/icloud/setup Then, turn on Find my iPhone, and the device will show up in the device list -
HT1414 What if the device is not showing up in i-tunes when I try to restore?
My i-phone 4 has gone dead and I can't restore it by hard re-set nor by going to i-tunes as the phone device is not showing up. Am i looking in the wrong place?
In iTunes... From the View menu > Select " Show Sidebar "
http://osxdaily.com/2012/11/29/5-tips-make-itunes-look-normal/
Maybe you are looking for
-
Hi there, Please excuse me if a make a few mistakes, I am French ;) I come here because firefox and thunderbird are not working together anymore. This is what happens : - Firefox and Thunderbird are opened - I click on a link in an email - A few seco
-
Convert to Droplet and single use
Current this script that I have had a lot of help with takes a look at the desktop and collects all the folders on the desktop and process the files accordingly. Now I need to change is so that I can drop any folder on the droplet/script and then it
-
Hello, Please, help me find what I'm doing wrong. I have done a dynamic stamp that displays a dialog to collect data from several input fields and then fills the stamp's template with the info collected. The thing is that the stamp works fine in Acro
-
Student Help advice! what is best iMac model for Final Cut Pro and logic pro
Hi I am currently looking into getting a iMac, but is toggling to device if I need a 27inch or a 21inch(top model),which will be used for Final Cut Pro and logic There is a lot of money being invested iMac, and I really not want to be stu k with a co
-
Inspection for every 10th piece or lot
Hi Experts We have good supplier and good manufacturing processes at the client site. They do not want to inspect every other piece, They want to inspection every 10th piece or lot for purchased parts and also for produced materials in shop floor. Pl