ISE 1.2 Sponsor portal port change not working

Hi,
Has anyone else had an issue where they change the default port number of the sponsor portal on the Admin node, all ISE restart, but the sponsor portal still only works on the default 8443 port?
Thanks,
Ct

Hi,
As you know that default port is 8443, but you can change this value so ensure that the same value you assign to the switch and it matches the setting in Cisco ISE.

Similar Messages

  • ISE 1.1 sponsor portal different type of guest accounts

    Hi there
    I just played around with the ISE 1.1.2.145 sponsor portal. I have the following 3 requirements, but I don't see a way the get there with the actuals sponsor portal features:
    1. I would like to create a event user (one single user for multiple logins) with a given username and a given password
    2. I would like to create a single user with a given username and a given password
    3. How can I change the password of such a user
    At the moment I am a little disappointed from the sponsor portal, there are not that features or I can't see the way to get there ;-)
    Can anybody confirm the above problems?
    Best regards
    Dominic

    It is possible to use internal users as well as AD users for admin.
    I'm not actually sure whetehr it's possible to stop using Internal Users.
    I have it working using both, primarily as I don't have AD credentials on customer site, so they use AD credentials and I stick to using Internal Admin User.
    I still haven't understood your original question entirely, but if you select the guest username to be created based on email address (rather than first name/last name), then you can create a single username using a fictional email address, and allow the user to change the password on first login. You can then change the password to whatever you want.
    Does that fit?

  • USB ports does not work

    Hi I have problems with not working USB ports. It used to work. I downloaded actual drivers at msi.com for my gaming notebook GX 60 Destroyer and now my USB ports does not work. What should I do?

    What driver have you updated?
    Try to do an EC firmware reset by removing the battery and the AC adapter then put the battery back with AC adapter attached.
    Same questions like Pegasus asked, does all ports not working? which one exactly? What OS are you using?
    Have you done any changes to the system? (for example: self-install OS or changing OS)

  • I plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

    i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

    Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?

  • Audio output and left USB port is not working!

    Hi! I have MacBook Air 13" late 2010, Audio output and left USB port is not working!
    What happened?
    Part No.: Z0JH000TE RS

    If the left USB port doesnt work with an external mouse its seems to be a hardware malfunction of this USB port.
    The newest BIOS is already installed?
    Have you removed all USB ports from device manager and restarted your notebook?
    If you have already tried this, contact an authorized service provider. The guys can try to fix this issue and it should be covered by warranty, if you still have warranty on this notebook. :)

  • MY EXTERNAL SPEAKER PORT IS NOT WORKING for hp envy

     MY EXTERNAL SPEAKER PORT IS NOT WORKING .WHEN I CONNECTED TO A EXTERNAL SPEAKER ,THERE WERE NO SOUND AUDIBLE.SO WHEN I DISCONNECTED THE CABLE FROM PORT,I WAS ABLE TO HEAR WITH THE IN BUILT SPEAKERS.EXTERNAL SPEAKER IS I GOOD CONDITION.I CHEKED WITH MY HEAD SET ALSO.IT WAS NOT AUDIBLE.MY LAP IS HP ENVY .KINDLY HELP

    Hi ano87, welcome to the HP Forums. What is the model or product number? What version of Windows is installed?
    Guide to finding your product number
    Which Windows operating system am I running?
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • After installation, the mobo LAN port is not working? urgent, help ple

    I just installed archlinux on my new i7 860 Asus p7p55d-e Deluxe build, but after the installation the LAN port is not working anymore. Before this, this Lan port works perfect in windows as well as in the arch installation. But after the installation, the led is orange and is blinking slowly, windows complains that the cable is not properly plugged, and even arch installation can't pull DHCP from it also.
    Luckily, the mobo has another lan port, so I have to plug the cable out and to the second port, but I couldn't seem to be able to find anyway to enable the first Lan port anymore?
    Have you seen anything like this, what possibly is the reason?
    Thanks, any help will be appreciated.

    heleos, thanks for the reply, the first thing I check is BIOS. There is definitely nothing wrong with that, since I loaded the default one.
    It is really strange, it seems no matter what I do, the 1st port which used to work, simple doesn't work, but the second one works fine.
    But after some poking around with the "ethtool", it starts to work again. I have no idea what cause the disfunction and what magically heal it again.
    Now I am really curious.
    Last edited by mark.altern (2010-04-18 09:52:09)

  • T420 USB Ports do not work after installing XP

    Hello my office has  been using Lenovo's for some time now but we recently purchased a T420 and installed Windows XP SP3 on it.  The issue we are having is that the uSB ports do not work.  I have tried every driver I can find but still no luck, can anyone help?

    hey chris0277,
    could you check in Device Manager and see if there is any ? or ! symbol on the USB area.
    If there is, i do recommend uninstalling the drivers from it and then visit http://support.lenovo.com and update your unit
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • PavillionG​7-2315nr windows 7(64 bit) USB serial control or usb ports are not working. Please help!

    Hi I downgraded the laptop from windows 8 to windows 7 64 bit. Two of my USB ports are not working and cant find the right drivers for it. Can you please direct me, where I can download and update the drivers? Thanks in advance.
    Shawe

    Hi:
    Download and instal both of these drivers and reboot.
    http://h20565.www2.hp.com/hpsc/swd/public/detail?s​p4ts.oid=5229463&swItemId=ob_125616_1&swEnvOid=405​...
    http://h20565.www2.hp.com/hpsc/swd/public/detail?s​p4ts.oid=5229463&swItemId=ob_123787_1&swEnvOid=405​...

  • My Air port is not working the wifi - just an amber light blinking. What's going on ?

    My air port is not working the wifi - just an amber light blinking. What's going on ?

    Sorry it is just not enough info to be able to figure it out.
    Do a full factory reset and start over.. that is the best way out of the hole.
    Using ethernet is far far superior to using wireless at least for setup.
    Using iOS device with airport utility is better than using wireless via a Mac with airport utility if you have MBA or MBPr.. but it is still better to buy a usb or thunderbolt to ethernet dongle so you have actual real connection and not a vapourous one.

  • IMac firewire port is not working

    iMac firewire port is not working
    Hi everybody, Happy New Year.
    I am a 72 years old semi-newbie in video editing, because Iedit only 1 or may be 2 movies a year since 2007 and I have only very little computer knowledge. 
    I received a new 27” iMac as a birthday gift 14 months ago.  About 10 months ago, with help, I successfully use the Migration Assistant to transfer some datas from my old power G4 to the iMac including two Final Cut Express projects.  I had one project successfully done; burned to DVD and I save it with Print To Video. Last week, I have my second project done, I burned the sequences into DVD but unable to do a Print To Videodue to the iMac is not communicating with my Sony camcorders DCR VX1000, this is the same camcorder I used on the last job which was working a couple of months ago.As a result, I try to switch the Easy Setup with different Format and different Use; I refresh the Canvas window; I did a Mix down; move the Screen Saver to NEVER as well as the Energy Saver set to NEVER SLEEP.  I also trashed the preferences (plist) folders; run the Utility repair, I replaced the firewire cable (4 pines – 9 pines 800), but nothing work.  Up to this point, I think that there is no signal from the firewire port to the camcorder because I understand when the sequences is ready, the firewire is connected between the computer and the recording camcorder, the Print to Video is activated, then the word DV- IN should be seen on the recording deck screen. This time, I don’tread such words on the recording screen. Therefore, I think there’s no out going signal from the iMac to the recording camcorder and the iMac is not receiving signal from the recording camcorder. At this point, I try to connect my iMac to the power G4 to see if I can do some data transfer. Follow the procedures, I hook up the data transfer cable between the G4 and the iMac, I can the fireswire icon moving on the G4 screen but no indication on the iMac screen (there should be some indications in the source bar), this shows me the iMac did not recognize the G4 which worked on previous data transfer.  It looks to me the firewire port on my iMac is dead.  What has gone wrong? Could I accidentally disabled the firewire port by some magic keystroke? (i.e. accidentally fat finger some thing to make it stop working?  Oh, by the way, during the playing around, went to the Final Cut tool bar, I click the View >Video Out > Digital Cinema Desktop Preview – Main, the result was a  black screen and the esc key was my rescuer - LUCKY LUCKY! Are there any other trouble-shooting techniques to apply before bringing to shop?  Please help!
    Sorry for such a long statement, forgive me for unable to make it shorter.  Thank you for your patience. Thanks to all the folks in this board for being so helpful.
    p.s.

    Not sounding good.
    If the system Profiler does not see it then there is a basic communication problem between camera and the Mac.
    I'm thinking the Firewire port is the culprit as some 800 ports were faulty.
    I'd suggest taking the Mac, cable and camera to your nearest Authorized Apple Service Centre and get them to diagnose the issue. eg. let them try to connect the two devices.
    Right (control)click the Sequence icon in the Browser and select Item Properties, do the same for a clip.
    You can also post screen shots for the Properties.
    Al

  • Time Capsule Internet WAN port is not working, what can I do to set it up?

    When I plug the ethernet cable from my router to my Time Capsule it should turn on a green light in the back of the TC, but this light is not turning it on anymore, and this port is not working, how can I set it up?
    I want to create a wireless network with the TC, but if this port (Ethernet WAN port) doesn't work, I can't, or can I? How?
    Then I want to use my 2 Airport Express to use the network that I want to create.
    I hope you can help me, thanks a lot.

    what model is the TC? A1xxx from the base please.
    How old and is the front LED otherwise showing it is operating OK?
    What is the network setup..? Is the TC bridged or router.. or is it in Join wireless network mode now..
    If the later.. the ethernet ports are turned off.. you need to do a factory reset of the TC.
    Factory reset.. Hold in reset button.. THEN power on the TC.. keep holding in reset for about 10sec until the front LED flashes rapidly.. there is a good chance the ethernet will work now.

  • Hp pavilion 1012tu usb 2.0 ports are not working

    my hp pavilion 1012tu USB 2.0 ports are not working only the 3.0 port is working

    Try this:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01893385
    or
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03327635
    Wish you luck,
    Karthik
    --Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
    --Please mark the post that solves your problem as "Accepted Solution"

  • One of my usb ports in not working

    On  my compaq presario v5000, os xp media center, the bottom usb port is not working. When i plug a thumb drive in, it does not reconize it. The mouse lights up but does not work. It shows up in device manager and says it is working properly. The other port works fine. Just reinstalled windows and the computer is completely up to date with all the service packs etc. Have tried unpluging and restarting to no avail. Have tried updating but says it cannot find a better driver. Please Help. Thank you.

    Could you please give me the exact model number of your notebook?
    You can use the following document if you need assistance in finding it.
    http://goo.gl/GDeRb
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • 1 of my USB ports is not working. Help?

    Suddenly one of my USB ports is not working. No matter what I plug into it, it doesn't work.  Any help or ideas would be appreciated.  Thanks.

    Not in the one that's ailing, but it does in the other one.  I've also plugged in an external USB hard drive and that doesn't connect.  Also a mouse's USB dongle and that doesn't work in the ailing one, but is fine in the other one.
    I've also tried ( a couple of times ) to simple reboot hoping that would jog it, but that doesn't seem to help either.

Maybe you are looking for

  • Opening XFL in flash is maintaining the geometry of the indesign document

    Hi , I have expoerted XFL out of indesign document .The indesign document contains 3 pages and each page contains a text element .Exported into XFL and opened in flash CS4 that contains 3 frames and each frame contains a movieclip.And inside each mov

  • Disable the Close Key on Yoga 13

    I am looking for a way to disable the Close button (where F4 button is located) while still keeping the functionality of the FN keys. The Close button is incredibly annoying (not even really sure why it is needed) as whenever I go to increase sound u

  • Select of date with yyyymmdd format

    HI I have a report that I want to select the current date -1. but our dates are in this format YYYYMMDD so I cant just use 'current date?

  • Help!My Mac doesn't find my external hard disk

    Today when I tried to open my mac it "stuck" on the first white screen (by the way my external hard disk was already connected).So, not know what to do, I disconnected the hard disk without ejecting it first, since my computer hadn't opened yet and t

  • Contact customer care / deleting account

    I want to delete an account. I have been following the procedure more than 7 times and it is a loop that always brings me back to the first step and never allows me to actually contact customer care to ask them to delete an account. This is just craz