ISE 1.3 Node AD Status updating issue

Hello,
since awhile i have the Problem with the 1st ISE node that it´s on updating.. status. (see attachment)
Between the update from 1.2 to 1.3 this issue was not seen by the System check, it occurs later.
Now i have try to leave and/or rejoin the node but dosn´t help. Also an reboot of the not have no effect.
The logs on the node and in the Microsoft AD dosn´t show anything with an issue. We see in MS AD log that this node comes with the correct credentials who i have tried the leave or join process.
Have anyone an idea to solve this Problem!?
Thanks!

Hi Drew,
long time ago I have post my problem, so we have now fixed it with with TAC but we have some other issues by replacing the EAP certificates fixed also.
So, we hit some BUGs that are also present in ISE 1.3 Patch 2 and would be fixed next ISE version.
By trouble shooting I have seen that when I disable the PSN service on that node which have the connecting issue, the AD connection now is OK on both nodes.
But this was not a solution for this, the realy one was on my site the FQDN entry for the sponsor portal that was pointed to this node. This field is not a requiered field and when we delete the entry the AD connectioin goes to green!
I hope you have fixied your problem also to this time.
Regards
Marc

Similar Messages

BLACKBERRY BBM STATUS UPDATE ISSUE

Hi, so I do have over 100 contacts and my status does not get updated. This is a huge issue for me. I do have the latest bbm. Anyone have the answer for me? Thank you.

No solution... the BBM status updates servers can be slow.
Be patient. They will update over time.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Leave request workitem in UWL status update issue

Hello,
Once manager receives a workitem in their UWL for leave request, the status is NEW.
Now when manager click on that workitem..opens it and closes it without taking any action.
The status must change to "IN PROGRESS".
This does not happen.
Status remain as NEW.
We do not have any issue once Leave is approved or rejected. Workitem gets disappeared appropriately.
Please help me in resolving this issue.

Hello Lukas,
We are on EHP4.
And it uses Java based applications.
Now can you please check in you machine the very same scenario.
Instead of looking at the senders UWL, have a look at the managers UWL.
Where status is displayed as "New".
Open the workitem and close it withpout taking any action.
Then manually refresh your UWL and observe the status. Is it "New" or "In progress".
However we have just recieved a reply from SAP that it is a standard behaviour. And status would remain as New if no action is taken.
But still I am not convinced. As if you open that workitem from Backend Inbox. The status in UWL in portal changes to "In Progress" !
Strange.

DChain-spec. status updation issue

Hi there
when i create material with sufficient views..the material gets status active in sales and purchasing view..(we got some work flow to approve for it..b4 both shud be inactive i mean 10 in sales view and G5 in purchasing view..once approved both are getting status active..so working fine)..
In case of extending material thru MM01 (no need for approve for it..so Work flow is not configured for it!)..am not getting status as active in both sales and purchasing views..even i give it as active...it is saving as inactive...
What am doing is just extending sales view with different salesorg and distribution channel and purchasing view with different plant..
My q: when we are extending the material for sales and purchasing view..need we also extend other views to get the material status ACTIVE.
pls respond urgently

Hi
when you are extending to different Organization levels, you have extend the Accounting view also.Since valaution of materials carried out valuation area level.In general , plant will be defined as the valaution area. There is no need to extend other views Basic data1,2 & classification data.Please extend the Acconting view and check.
Regards
Ramakrishna

Weblogic Portal 10.3 CMS node property value update issue resolved

Hi Everybody,
issue resolved
Edited by: user1993265 on Aug 7, 2009 1:04 AM

set all the properties appropriately.
Even after setting those values also, it will give the same error in WL 10.3
In the build scripts, instead of having workspace = ${workspace}/workspace.xml, replace it as workspace = ${workspace} (for WL 10.3)
Its working for me.
Also, if the build.xml for ear application is generated through "workshop ant scripts", then u have to comment the code to cleanup archive.dir and archive. file.
Otherwise, the ear file will be generated and immediately deleted( you can see this in build log file)

ISE 1.2 Posture Update Issue

In ISE 1.2 below message is showing when we do a web posture update either manual or automatic.
"Remote address is not accessible. Please make sure update feed url, proxy address and proxy port are properly configured".
It was working fine for long time and all of a sudden it stopped working
and no changes have made on the network side.
https://www.cisco.com/web/secure/pmbu/posture-update.xml is working in the browser.
Few customers had reported the same. Boxes are installed with latest patch version 7.
We can upload the updates through offline mode.

I have experienced the same issue. Both the posture update feed URLs
1. https://www.cisco.com/web/secure/pmbu/posture-update.xml
2. https://www.perfigo.com/ise/posture-update.xml
give the same error, when the ISE boxes try to do the updates. But these URLs are accessible from outside.
A TCP dump taken from a box shows as "Certificate unkown Alert " (when it tries to update) for the received certificate from the other end. Then the ISE box sends a (FIN,ACK) and terminates the session.
The relevant pcap file is attached

Updated my Iphone 4s to the new IOS and now i can't restart or recover it. as soon as it starts recoring, the status bar fades and the connect to itunes screen appears. WHAT THE HEY!? I'm SICK of UPDATE ISSUES!!!!!!

Updated my Iphone 4s to the new IOS and now i can't restart or recover it. as soon as it starts recoring, the status bar fades and the connect to itunes screen appears. WHAT THE HEY!? I'm SICK of UPDATE ISSUES!!!!!!

Yes, yes, yes... I've gone through all the common sense trouble shoots. Would't be here asking questions if that answers existed on the net. Sorry if I sound a bit edgey, but I've had nothing but issues with every update since IOS 7. Clearly there's nothing that can be done about this. and this is the final nail in the coffin to try to make me buy an Iphone 5.

Status update for MeeGo on the N900

Here's a copy of the text sent by Harri Hakulinen from Nokia. He is the project lead for MeeGo on the N900. This message was sent to the MeeGo developer mailing list just now:
Hello MeeGos !
This is brief status update of "MeeGo to N900" project. This project is currently running as Nokia project, and I am Nokia project lead for it. The current closed mode of development is not the target for us at all, but rather transitional condition. As already discussed by Valtteri in TSG meeting, we are looking into going more open mode shortly. One reason why we have done this on this way is that at the same time we have been trying to handle opening of many currenly closed components that are needed in MeeGo and to build feasible MeeGo images for N900.
However, a lot of related work is already done completely open, you can find more info from places like ofono.org, connman.net and meego.gitorious.org . So if you are eager to contribute or want to closely follow whats happening, please work on those.
As you know, we have delivered working MeeGo images for N900 as part of first code drop in the end of March. At that state we were using older kernel version on N900 than on Atom side, as we used the same kernel (.28) than what is used in Maemo 5 based products today. We ended up doing that simply because lack of time to contribute and port all the drivers to the newer kernels.
Now, for the upcoming May release of MeeGo, we are going to use the same kernel version (.33) than Atom based devices are using. For that we need to submit number of ARM-architecture patches to MeeGo as well, because many of the required ones have just been contibuted upstream kernel and were not available in .33 version originally.
We have already enabled most of the main drivers, like LCD, GFX, Wlan and BT. Still, there is a lot to do in order to enable .33 on N900, like audio drivers, and modem subsystem including SSI buss driver, modem data and audio drivers etc. Our adaptation guys are in fact contributing those modem subsystem related drivers as we speak, and if you are following kernel mailing lists you can see how that goes on.
Besides of enabling the new kernel, we are working with number of smaller and bigger issues for N900. Starting from the beginning, we are now based on ARMv7 combiled code, so the code should be better optimised for N900 now. ARMv5 compilation that was in use for code drop will still be there, and it also seems to be used at least by community project that is planning to release MeeGo for good old N810 tablets
Also, we are planning to enable dual booting of Maemo 5 and MeeGo for the upcoming release. So that will be offered as 3rd way to setup MeeGo to N900, including the existing "native" MeeGo only on N900 and chroot based MeeGo on Maemo 5 setups. Taking the dual boot mode into use likely includes upgrade to Maemo5 kernel as well, but that should not be big issue in the process of enabling that.
As I don't want to go ahead of others working on MeeGo architecture and other issues I will stop now, but I will report again when we have more to tell about the subject.
Br,
// Harri

Here's another update..
It seems that MeeGo on the N900 is not directly being driven by Nokia! It's an open project.. so the net result is MeeGo on the N900 may look and feel very different to Meego on the N900's sucessor
Either way, I'm certainly greatful for their efforts!
Hello Meego's,
As indicated in my previous mail about "MeeGo for N900" status, we were planning to open up our MeeGo work around N900. Now I am happy to announce, that we are there
First, to make it absolute clear for everybody: This is about open MeeGo adaptation to N900 device.
Like any other MeeGo project, it is open source project for all applicaple purposes, and does NOT directly have links to any potential Nokia product or potential product plans. So, based on this or any other of my posts, please do NOT start or continue speculation of upcoming Nokia MeeGo releases. That is practically not helpfull, and mostly only takes our time when we need to explain our words and actions in detail to various directions.
From our part, we are trying to implement the open development model that has been discussed now so many times around MeeGo. On practical terms, we are trying to work based on proposal by Carsten Munk, see
http://wiki.meego.com/Proposal_for_Best_Practices_for_working_in_a_MeeGo_team
We have already created some resources that will be used by the team, you can learn about those and the upcoming ones from http://wiki.meego.com/ARM/N900. We have IRC channel for realtime discussion, we will use meego-dev mailing list for normal discussions and announcements, and we will have Gitorius project for code.
We will evolve our practicies during the work, so if you are interested, stay tuned to those channels. I belive that soon we are also able to figure out, what is best way for community members to help us in development, and then effectively be part of the team.
I would also like to use this as opportunity to introduce the team behind this work (so far) and also thank them about their hard work and long hours. We have team that consist of some Nokia subcontractors and also growing team of Nokia personel:
"MeeGo for N900" team (so far)
- Cybercom Turku team; Marko Saukko, Jouni Peltonen, Sami Sirkiä, Jari Smura and Luka Milovanov.
- Cybercom Tampere team; Kalle Lampila,Teemu Tuominen,Tuukka Mäkinen and Ville Marjusaari.
- Carsten Munk via Nomovok
- Jarkko Nikula via Atomide
- Jan-Simon Möller from Linuxfoundation
- Nokia team; Alexander Kanevskiy, Felipe Contreras, Markus Lehtonen, Ameya Palande, Sakari Poussa, Roger Quadros and me.
In addition to official project team, many Nokia people have helped us despite their hectic daily work, even with their free time. Most of them are driven by the desire to open, repurpose and upstream all relevant sw that has been originally created for Maemo 5 based N900 product during previous years.
Marko, Jouni, Sami & Luka and Markus were working with me already on last year when we did prototypes and interoperability tests of Maemo & Moblin stuff combined in different ways. Based on those we had pretty good picture of what we are doing and why.
And of course, we have had very good and productive co-operation with various Intel teams since those times. Anas Nashif and many others from Intel's MeeGo team have done a lot for us by enabling ARM stuff in MeeGo OBS and repositories.
Last but not least, I want to give special thanks to Stskeeps (alias Carsten Munk . He has teached us how to operate on open, and he has also done respectable amount of this work since early days of Meego. In addition to that, I belive that his earlier work on Maemo community and on Mer project has in fact inspired all of us and shown a way to MeeGo alredy years ago.
Br,
//Harri

10.9.2 Update Issue (VPN) - Eclipse Perl debugger issues while connected to VPN

This post was initially added to this discussion: 10.9.2 Mavericks update issues
I have yet another issue related to 10.9.2 update - Eclipse Perl debugger issues while connected to VPN...
One of the big changes introduced by 10.9.2 update - are VPN changes (security fixes). Unfortunately, whatever these changes are - they "broke" Eclipse (OpenSource IDE) debugger. I am not sure if *all* programming languages (Eclipse plugins) are affected by this, but I know for sure that 'Epic' (Perl plugin) debugger *stopped working* while system is connected through VPN.
Here is the error that gets “popped-up” in the Eclipse:
Timed out while waiting for Perl debugger connection
… and here is exact exception stack that gets printed:
Unable to connect to remote host: 130.10.210.74:5000
Compilation failed in require.
at /Users/valeriy/workspace/ROBO-PROD-RA-685/src/lib/test/Val_test.pm line 0.
main::BEGIN() called at /Users/valeriy/workspace/.metadata/.plugins/org.epic.debug/perl5db.pl line 0
eval {...} called at /Users/valeriy/workspace/.metadata/.plugins/org.epic.debug/perl5db.pl line 0
BEGIN failed--compilation aborted.
at /Users/valeriy/workspace/ROBO-PROD-RA-685/src/lib/test/Val_test.pm line 0.
Can't use an undefined value as a symbol reference at /Users/valeriy/workspace/.metadata/.plugins/org.epic.debug/perl5db.pl line 7596.
END failed--call queue aborted.
at /Users/valeriy/workspace/ROBO-PROD-RA-685/src/lib/test/Val_test.pm line 0.
(of course IP address changes dynamically for each VPN connection session)…
I was able to prove that this issue is related to 10.9.2 update:
Issue *does not* exist under 10.9.1 (I had to revert back to 10.9.1 to get it working again)
No updates were performed around the same time 10.9.2 update occurred (I verified that using Software Update log)
No configuration changes were introduced around the same time
Reverting back to 10.9.1 using Time Machine (thanks god I had backup !!!) fixed the issue
Steps to reproduce this issue:
In Eclipse, try to use 'Epic' (Perl plugin) to debug any perl script while *not* connected through VPNEpic debugger works
Connect to VPN
Start Epic debugger to debug same script
Debugger *does not* start, and "Timed out while waiting for Perl debugger connection" error pop-up comes up after some time. At the same time, exception stack (listed above) is printed in Eclipse's console
I am programmer/software developer, I work remotely (telecommute) and thus have to rely on use of VPN to connect to company's intranet. Perl - is primary language used by my team, and we use Eclipse IDE with Epic plugin - heavily. Use of Epic's debugger - is a *very large* aspect of my work, I cannot work without it. So in essense, 10.9.2 has *entirely* disrupted my ability to work! It took me almost a week to get back to normal work environment, and I cannot afford to let it happen again... I need Apple's development team resolve this VPN related issue, as soon as possible! Because of this issue, I am *stuck* with 10.9.1 and can not upgrade my laptop to any other versions. In fact, I had to disable system updates - just so I do not run into this issue again... I contacted Apple's Tech Support on 02/28 with this issue (Ref: 582428110), asking to raise trouble ticket. Since then, I tried to follow-up on that issue, but do not get any information. Please advise on the status:
is there a trouble ticket to track this issue?
is there any progress?
what's the ETA for an update that fixes this problem?
- Val
Message was edited by: vpogrebi

Am I the only one experiencing this issue ???

Unable to Resolve Windows Update Issue in Windows 8.1

Hello,
I recently, as far back as 1 month ago, began experiencing issues with the update service under the Windows 8.1 OS platform.
I found that I was having to repeatedly run the Windows Update Troubleshooting Tool. This appeared to fix the issue with each run of the tool, but eventually I'd have the same problem receiving updates again. My problem is as follows:
1. Windows Update service hangs during register analysis.
2. Unable to reset (stop or restart) wuauserv.
3. Unable to reset (stop or restart) Cryptserv.
4. Unable to reset (stop or restart) BITS.
5. Unit recently, was unable to connect to internet from Desktop GUI, but was able to connect using Metro GUI.
I'm not sure is there was a recent update that caused this issue, but I can no longer download updates for my system, nor can I successfully run the Windows Update Fixit tool.

Hi,
Let's confirm these situations:
Now your desktop Internet Explorer can't connect Internet.
You receiving the same updates again and again.
If I am right, please check that update's installation status from update history.
Then refer to this article to troubleshoot:
http://social.technet.microsoft.com/Forums/en-US/c842b997-42a4-41fb-9992-b58d65d068d9/forum-faq-common-steps-to-start-troubleshooting-windows-update-issues?forum=w8itprogeneral
Karen Hu
TechNet Community Support

Sender JDBC Adapter Select/Update Issue

Dear All,
We have configured a Sender JDBC Adapter to Poll data from the DB2 tables. It is working fine and both the select and the update queries written are also getting properly executed and are changing the status of the flag from Y to N once read from database.
In the communication channel ->
select * from <table> where flag = 'N'.
update <table> set flag = 'Y' where flag = 'N'.
But I have one doubt after executing the select query some new data comes into the table of status flag 'N"., then will this unselected data will also be updated to 'Y' .
The question is while we do a select and update from XI on the DB table and at the same time there is an insert happening into the table from the other end how will the adpater behave in this case.Will it result in missing of some records during next select/update transaction from XI..
Your inputs will be appreciated.
Regards
Amit

Amit
Did you ever get a solution to your question ?
Sender JDBC Adapter Select/Update Issue
Posted: Apr 24, 2008 2:29 PM Reply
Dear All,
We have configured a Sender JDBC Adapter to Poll data from the DB2 tables. It is working fine and both the select and the update queries written are also getting properly executed and are changing the status of the flag from Y to N once read from database.
In the communication channel ->
select * from <table> where flag = 'N'.
update <table> set flag = 'Y' where flag = 'N'.
But I have one doubt after executing the select query some new data comes into the table of status flag 'N"., then will this unselected data will also be updated to 'Y' .
The question is while we do a select and update from XI on the DB table and at the same time there is an insert happening into the table from the other end how will the adpater behave in this case.Will it result in missing of some records during next select/update transaction from XI..
Your inputs will be appreciated.
Regards
Amit

BBM status update is extra sensitive....

I have been facing problem with BBM status update and display name screens.
They are extar sensitive and change immediately before you actually decide to press enter.
Any solutions?

Good day
Welcome to BB forums
I never seen or heard of something like that happening!
may I ask what OS your running now?
Want to contract me? You can follow me on Twitter @RobGambino
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Ios 8 photos won't upload in safari to facebook status update

Installed iOS 8. I use Safari to access Facebook.com. photos will no longer upload to Facebook status update.

Stan, did they infer it only 'may' get fixed?
Surely they Have to fix this very Major issue or they'll go bust!
I'd never trust them again.
Do you have the email address of Apple?
Or know if they've made any public statements concerning this problem.
the other issues, like caps coming on and off or slower speeds I can live with but not being able to upload images is a major problem. If not fixed it would render my iPad virtually useless to me.

OnPlus not providing new Contract/Warranty status updates

The Cisco Contract/Warranty notification function in OnPlus is currently not providing new updates.
The Product Contract/Warranty function of OnPlus displays product up-to-date information regarding the Contract status and Warranty for supported Cisco devices. This function is currently not providing new updates to those devices in OnPlus and the OnPlus engineering team is working on a resolution to the problem.
Status updates for other product lifecycle information about Cisco devices, such as, Software and Hardware End-of-Life, Product Security Alerts, and Field Notices are available in OnPlus.
As additional information is known for the time to resolution, we will post more details.
Thanks,
The OnPlus team

We have resolved this issue and OnPlus is now providing complete lifecycle information for new devices scanned or discovered through ON100.
We applogize for any inconvenience.
Thank you,
OnPlus Team

[Forum FAQ] Common steps to start troubleshooting Windows Update issues

In this article, we provide you some common steps to quickly narrow down Windows Update issues. Before you post your question, you can follow the steps below to see whether
the issue can be identified and resolved. If not, please post it in Windows 8/8.1 Forum with the analyzed details.
Scenario 1: New updates can’t be checked.
Make sure your internet connection works fine.
Make sure you could connect to Windows Update Server or Microsoft Update.
For more information about how to troubleshoot problems connecting to Windows Update or to Microsoft Update,
visit the following Microsoft Web site:
http://support.microsoft.com/kb/818018
Scenario 2: Windows Update can’t be installed or configured.
Suggestion 1: Run the
Windows Update Troubleshooter
Press
WINDOWS + X combination key to open the Control Panel;
Change its view by “Category”;
Click
Find and fix problems;
Under
System and Security entry, click Fix problems with Windows Update.
Follow the instruction to complete it.
Suggestion 2:
Make sure the following services could startup automatically
Press WINDOWS + R combination key, type “services.msc”, press
Enter;
Find out the following services and the dependent services:
Windows Update
Background Intelligent Transfer Service
Windows Modules Installer
Double click every service, on General tab, set its Startup type as “Automatic”;
Click Apply and OK button.
Note: If these services miss or damage, you need to use Windows 8/8.1 installation media restore them.
Suggestion 3:
Delete the Windows Update cache
Press
WINDOWS + R combination key, type “services.msc”, press
Enter;
Find out the
Windows Update service, right click and stop it;
Located to
C:\Windows\SoftwareDistribution;
Delete the whole
SoftwareDistribution folder.
Suggestion 4:
Reset the Windows Update component
For more information about how to
reset the Windows update component,
visit the following Microsoft Web site:
http://support.microsoft.com/kb/971058
Suggestion 5:
Install the Windows Update in a
Clean Boot state
For more information about How to perform a clean boot in Windows,
visit the following Microsoft Web site:
http://support.microsoft.com/kb/929135
Suggestion 6:
Reset, refresh or restore your PC, and then try to Windows Update
http://windows.microsoft.com/en-gb/windows-8/restore-refresh-reset-pc
Scenario 3: You might still be repeatedly offered the same update.
You need to check its installation status and decide if it should be installed again.
For more
information about Windows Update or Microsoft Update repeatedly offers the same update,
visit the following Microsoft Web site:
http://support.microsoft.com/kb/910339
Here are the solutions for some common Windows Update error codes or corresponding issues:
1. .NET Framework update installation error: "0x80070643" or "0x643"
http://support.microsoft.com/kb/976982
2. Error 0x800B0100 when you try to install Windows Updates or Microsoft Updates
http://support.microsoft.com/kb/956702/en-us
3. Error 0x80070005 in Windows Update when you try to install updates
http://support.microsoft.com/kb/968003/en-us
4. Error message 80246008
http://support.microsoft.com/kb/971058
5. Error message 80070003
Stop Windows Update service, rename SoftwareDistribution and catroot2 folder, then restart Windows Update service.
6. Error message 0x80072f8f
Check and correct PC’s Time and Date.
7. Automatic Windows update settings is gray out.
Please locate to the below registry:
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU.
Add Value name: NoAutoUpdate
Value data: 0 or 1
0: Automatic Updates is enabled (default).
1: Automatic Updates is disabled.
Windows Store app update general troubleshooting steps
If you're unable to open the Store, try running the
Apps troubleshooter
If you can’t find the app update. Please consider these scenario:
Confirm if you set the proxy which affect the Windows store update.
For more information about using authenticated proxy servers together with Windows
8, visit the following Microsoft Web site:
http://support.microsoft.com/kb/2778122
Confirm the app is available in your current region;
Make sure “Automatically update my apps” is set to Yes;
Make sure the latest updates are installed on your PC and that your antivirus program isn't preventing the app from running.
Make sure the app isn't blocked by Windows Firewall
Sync your app licenses.
Try to clear
the Windows store cache on your PC:
Press
WINDOWS + R combination key, type “wsreset”, press
Enter;
Try to install the update again.
Applies to: Windows 8 and Windows 8.1
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

NEW
ADK download link is unavailable
https://dev.windows.com/en-US/featured/hardware/windows-10-hardware-preview-tools
Working one here at the bottom of the page

ISE 1.3 Node AD Status updating issue

Similar Messages

Maybe you are looking for