ISE and Self Registration

Ciao,
is it possible to send user and password credentials, created by self registration, via mail or SMS ?
For example:
- user connect open ssid,
- open browser and ISE, after redirect, present http guest portal with self-registration,
- user compile form of self registration with email or phone fields,
- credentials are send via email (not displayed as default).
Thanks,
Regards,

Similar Messages

Netweaver Gateway user creation and self registration Procedure

Dear All,
Can you please provide the complete step by stpe by process for creating netweaver gateway user creation and self registration process
by useing templates.
Thanks & Regards.
aYYaPPa.

Hi Sriram
Thanks for immediate response.
I went throgh that link whcih is posted by you.
But i need some more explosure to undesrtand user creation by using that templates
Thanks,
Ayyappa.

ISE and self register

Hello,
Can ISE differentiate and see on which wireless AP a user(MAC) connects ?
Goal: i want to allow guest self registration, but not from any Access Point. We have a presentation room where presentation for third parties are given regularly. This room is covered with two high-density capable APs. I only want to allow guest in this room to generate their own guest accounts for 1 day from these APs, not every user on every Access Point.
(and i want to avoid creating a dedicated different SSID for this)
regards,
Geert

This document describes how to configure authorization policies in Cisco Identity Services Engine (ISE) to distinguish between different service set identifiers (SSIDs). It is very common for an organization to have multiple SSIDs in their wireless network for various purposes. One of the most common purposes is to have a corporate SSID for employees and a guest SSID for visitors to the organization. Please check below link for certificates configurations.
http://www.cisco.com/image/gif/paws/115734/ise-policies-ssid-00.pdf

Cisco ISE users self-registration Time Zone

Hello, everyone!
I'm configuring ISE Guest portal and I wonder why I need to choose time zone while in self-registration? Where is it used? And how can I disable this parameter from the self-registration page?

Time profiles provide a way to give different levels of time access to different guest accounts. Sponsors must assign a time profile to a guest when creating an account, but they cannot make changes to the time profiles. However, you can customize them and specify which time profiles can be used by particular sponsor groups. Beginning with Cisco ISE 1.2 time profiles are referred to as the account duration in the Sponsor portal.
Cisco ISE 1.2 includes these default time profiles, which replace the profiles available previously:
DefaultFirstLoginEight—the account is available for 8 hours starting when the guest user first successfully connects to the Guest portal. This replaces the DefaultFirstLogin time profile.
DefaultEightHours—the account is available for 8 hours starting when sponsors first create the account. This replaces the DefaultOneHour time profile.
DefaultStartEnd—sponsors can specify dates and times on which to start and stop network access.

ISE guest self-registration Client Limitation per day

I deployed ISE with guest self registration on the Web Portal.
I want the guest (ex: AndroidPhone with Mac address: xx:xx) to be able to get 1 hour of internet access per day.
I know that using Time profile I can limit the guest to 1 hour of access, but how can I give the guest access each day.
Requirements:
--- I want to make this phone create only one account. ( How can I limit his mac address from creating new accounts when his account will expire in one hour)?
--- After 1 day, I want to give the same phone access (I dont mind if it is a new account or the same account as the day before)
How can we make this happen? Otherwise, everytime the account expires, the phone will be able to auto-register with a new account.
Thank you

Companies and self-registration.

Hi,
I would like to implement self-registration module at
the portal (EP6SP2) with an option to TYPE the name of
the company the user belongs to, which can be used later
as "company" in the portal meaning. It is almost like this
(http://help.sap.com/saphelp_ep60sp2/helpdata/en/8e/53921c6d00064b8c58e528fd914dd4/content.htm),
with one big BUT. The list of the companies cannot be
defined in ume.tpd.companies property of ume.properties
file before the users will type it. It have to grow up
with the portal and the new companies the users type in.
Is it possible to add companies to that list programmatically?
To save server restart after that?
Meanwhile I add a company the user typed at the self-
registration procedure as an attribute of IUserMaint,
but if I'd like to use it as companies in the portal
concept - I can't.
Thank you,
Yuri

Yuri,
I am facing a similar problem. Were you able to find any solution. The situation is bit more complex at my end. I have approximately 5000+ Suppliers and each of them will have one designated Admin who will be handling the User Administration of users registering from that supplier (could be 1 to 10 from each supplier). Also he will need to assign them roles. Now before he can assign them roles he himself will need to have 'Role Assigner' rights. But i still need to figure out how would the users be able to specify the company during the registration because without that how will the portal know which administrator to redirect him to.
Any thoughts ?
Vishal
Message was edited by: Vishal Vadodaria

ISE Guest Self Registration Portal

Hi,
I get the Guest portal page and my credentails authenticate correctly and the device is authenticated using MAB. Then i get this message
This device has not been registered
You need to manually configure your device
Your device configuration is not supported by the setup wizard
Device ID < MAC of my windows 7 PC
Any idea how to get past this stage
Thanks
Nki

If you are only using mab then you will have to go the device registration page and register the mac address. Disregard my previous post. Here is how you manually register the device - http://www.cisco.com/en/US/docs/security/ise/1.1.1/user_guide/ise_mydevices.html#wp1064213
You will have to create the identity sequence store in order to allow your AD account (if integrated) to access the registration page - http://www.cisco.com/en/US/docs/security/ise/1.1.1/user_guide/ise_mydevices.html#wp1056461
Thanks,
Tarik Admani
*Please rate helpful posts*

Portal Self registration issue

Hi guys,
I had activated Portal self registration with companies feature. what i did is , i assigned one role (ess portal role in which all my ess screens are covered) to authenticated group and every_user_core_role to anonymous group and did necessary configuration in configtool . The problem i am facing is that my self registered users are able to see my portal role without any approval (via approve/ deny in user administration) which i want to show them after approval . PLs guide what might me the issue.
Regards,
Shwetang Saxena.

Hello Soni!
Please review and follow the steps mentioned here:
Companies and Self-Registration with Approval (SAP Library - User Management of the Application Server Java)
https://cw.sdn.sap.com/cw/docs/DOC-110636
Hope this helps,
Edison

ISE and UC

hello all,
We're currently implementing Cisco Unified Communications side to side with ISE.
there is a profile set on ISE for the phones.
however we're experiencing a few issues with ISE and phone registration
I'm not the expert on ISE. I'd like to know what is the best practice for ISE when you have cisco UC as well.
any help will be greatly appreciated
thanks
Cris

Please check below which will be defiantly helpful for you in configuration of Cisco IP Phone between the Test-PC and port 5 on Sw1 and its MAC address to the ISE
http://www.ecdos.com/sharzi/INE%20CCIE%20Security%20V4%20Technology%20Lab%20Online%20Workbook/Section%204%20Identity%20Management/ISE%20and%20MAB.pdf

I want to integrate SMS gateway to Cisco ISE 1.2 and my question is SMS notifications are supported for Guest self−registration

I want to integrate SMS gateway to Cisco ISE 1.2 and my question is
SMS notifications are supported for Guest self−registration Services ? or it should be done by Sponsor

I'm not sure I understand the question. Do you want to log in to the Sponsor Portal using AD credentials?
Create an Identity Source Sequence using AD as an Authentication Source. Go to Administration > Identity Management > Identity Source Sequences. Either Edit or +Add a Sequence and choose from the Authentication Sources shown.
Then choose that Identity Source Sequence by going to Administration > Web Portal Management > Settings. Double-click Sponsor from the Left Menu and click Authentication Source. Choose the Identity Source Sequence. Click Save.
I hope this helps.
Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.
Charles Moreton

ISE 1.2 Guest Self Registration

We are in the middle of an ISE deployment. We are currently on version 1.2, Patch 3. One of our use cases for ISE is Guest Access. I am trying to understand more about self registration functions in ISE. What are the capabilities? Can a user access a self registration page, enter credentials such as an email address, or phone #, and receive an email or text message with the guest account credentials?

yes Guest can acess self registration page and enter his name company email phone etc...and do self registration and can get the credentials via mail and sms
http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/user_guide/ise_user_guide/ise_guest_pol.html#pgfId-1482408

ISE 1.2 Self Registration

Hi
I have set up self registration on an ISE 1.2 and am using a customised portal.
Everything works OK except for one annoying element.
Although I have assigned a time profile of 30 days as a test - the self registered accounts always expire after 5 days.
Any ideas about this?
Regards
Roger

Hi Roger,
I have done this before and don't recall having issues. Can you post some screenshots of the ISE guest configuration and time profiles screens?
Also, what patch are you on?
Thank you for rating helpful posts!

CISCO ISE 1.2.0.899 - Self registration email address field Limit

Hi
I was wondering if someone out there can resolve an issue I am seeing, when a user goes to the self registration portal and enters an email address it only allows 24 characters to be entered, in the documentation it states that up to 48 characters can be entered. Is there a setting that i need to change to increase the character limit to above 24.
Thanks
John

Hi Anas
That is not true, I had the same problem with ISE in our Network.
We are running 1.2.0.899, after all the troubleshooting I decided to upgrade the Patch on the ISE.
As part of that I have deployed patch 5, which has resolved the issue.
So please just download patch 5 for the solution.
Regards
Sandy

Self Registration and Attestation is not working in OIM 9.1.0.4

Hi,
i have setup a new OIM environment using OC4J. I am able to create users and provision IT resource but self registration and attestation is not working. not sure it is OC4J issue or OIM issue. For self registration it says request is submitted but when I login as xelsysadm and dlon't see any pending request and same thing happens for attestation. It dowsn't display any error but never gets completed and don't see this also in pending request list. If anybody has idea to debug the issue then let me know and thanks for help.
Thanks,
HC

As per given bug it is looking for jars which is missing
have you install connector using deployment manager?? if yes it copy required jars at target location. verify if not there copy jars in Scheduled Task folder.
Check the document if any external jars required and same put at ThirdParty folder

Self-Registration in OIM 10g: how to install, customize and use of SPML

Hello. Can someone point me to any documentation (Oracle or other) on self-registration in OIM 10g. Like doc on how to install it and customize it. Also a doc on how to set up self-registration on a separate server and talk to OIM server using SPML.

Refer doc below:
http://download.oracle.com/docs/cd/E14049_01/doc.9101/e14044.pdf
regards,
GP

ISE and Self Registration

Similar Messages

Maybe you are looking for