ISE and SMS in plain text for Guest Credntial notification

I have configured a SMS notification for the Guest Credential.
When the SMS gateway receive the message, it's discarded because it's not in plain text, it's contains some HTML tag.
We haven't the possibility on the SMS gateway to modify the received message.
On the ISE I seen that we can choose the email format only for the system alarm settings and no for SMS message.
Correct ?
It's possible to send the message in plain text !!!!
thank you

I think it only use HTML.
Step 6 Type the email body in the Layout text box. This contains the account login information for the guest user.
You can use HTML tags and special variables for formatting the language template for e-mail notification. The following is an example of the login information for the body of an email in an English language template:
Welcome to the Guest Portal, your username is %username% and password is %password%
Jatin Katyal
- Do rate helpful posts -

Similar Messages

How to set plain-text for outgoing messages?

I just upgraded from a Pre "minus" to a Pre 2 with WebOS 2.1 . I now have mail recipients complaining that my messages are in HTML. How to I revert to plain-text for sending messages?
Post relates to: Pre p100eww (Sprint)

Hi jason ,
For setting Heder text for your ALV table
ip_confing type ref to CL_SALV_WD_CONFIG_TABLE.
"set alv table header
ip_config->if_salv_wd_table_settings~r_header->set_text( 'Test ALV Header functionality' ).
first you have to hide the DDIC text and then try to set your own text .
"modify columns
LOOP AT lt_columns INTO ls_column.
    lr_column = ls_column-r_column.
    CASE ls_column-id.
      WHEN 'MANDT'.
        "hide this field
        lr_column->set_visible( cl_wd_abstr_table_column=>e_visible-none ).
       WHEN 'SEQNR'.
        "set header to different string
        lr_column->r_header->set_ddic_binding_field( if_salv_wd_c_column_settings=>ddic_bind_none )." use this line to hide ddic text
        lr_column->r_header->set_text( 'Position' ).
    endcase.
endloop.
Regards
Chinnaiya P

TS2755 I don't have an iPhone. My friend does and we have been texting for 5 months now and all of a sudden I can't revcieve her messages. I can message any other iPhone no problem and she has no problem texting other people as well. What is happening?

I don't have an iPhone. My friend does and we have been texting for 6 months and havn't had any problems. All of a sudden I cannot get her text messages. She revieces mine but i cannot recieve her's. I can also text other iPhone users with no difficulty at all.
What is happening?

I would have your friend first do a reset on her iPhone. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. Also, SMS is a carrier feature and if she is having trouble, she might want to contact her carrier and have them double check her account provisioning. It might just need a reset on their end.

ISE and SMS integration, how to configure

Hello folks,
I wonder what I have to do in ISE to enable it sending SMS when activating a new guest account. I believe there must be a corresponding setting somewhere under Web Portal Management to configure SMS gateway neither under Global system settings.

This issue has not been resolved ( %mobilenumber% variable is not inserted into address %mobilenumber%@domain.net).
We opened case on this issue, but it is not yet resolved .
But support working in this direction - is already fixed problems with subdomains (@sms.domain.net) and restrictions on the number of characters after symbol @.
This issue we have resolved as follows: all notifications are sent to corporate e-mail Microsoft Exchange Server, where rule is configured to process messages sent over e-mail/SMS gateway (based on field *Destination in template "Configure SMS Text Notification"). According to this rule, Microsoft Exchange sends these messages to another server that is running a regular "Microsoft SMTP Service" ( for receiving and storing messages in a local folder). The same connector is configured to send messages for @sms.domain.net back to the mail server Microsoft Exchange. In the scheduler is configured launch PowerShell script that "cuts" from the body of the message variable %mobilenumber% (which was previously defined in template "Configure SMS Text Notification") and inserts it into address %mobilenumber%@sms.domain.net.mobilenumber%@sms.domain.net.
When the problem is resolved, this server will not be used/needed, and SMS message will be forwarded directly to the gateway e-mail/SMS or in SMSC.
Sincerely,
Andrey

TextField ADS and not using plain text

Hey
Im using interactive forms and I have a problem using linebreaks. The InputField can only accept plain text. If I switch this option off, I get this error message "Node cannot be inserted where requested" when im pressing the Submit to SAP button to go back to another view.
Someone know what im doing wrong?

Hello Kristoffer,
is it necessary for you to use an input field ?
Why aren't you using a textedit field or textarea ?
kind regards
Fabian
Message was edited by: Fabian Eidner

[SOLVED] Thunar sees both '.doc' and '.txt' as plain text files...

Hello,
I'm using Thunar as my file manager. However, it sees both '.doc' and '.txt' files as "plain text files".
This means that I can't make the .doc files open with OpenOffice and the .txt files open with a plaintext editor, because whenever I change the program association of one, the other changes.
How to fix that? (looks like a MIME-type issue).
Thanks.
Last edited by Renan Birck (2009-08-14 15:57:05)

DaVince wrote:Open /usr/share/mime/globs and /usr/share/mime/globs2, find the lines that assign *.doc to the plaintext mime type, and remove them. Restart Thunar, problem solved.
Finally it works. Thanks!

ISE and SMS notification

Environment
ISE 1.1.2
As already stated in other posts in this forum, it appears there is a kind of limitation when configuring SMS Notification options via the ISE GUI interface under the "Administration ==> Web Portal Management ==> Settings ==> Sponsor ==> Language template ==> English ==> Configuring SMS Text message Notification" panel :
the Destination field, in this panel, can only contain explicitely the email address of the SMS Gateway;
it cannot contain an email address with the %mobilenumber% variable, such as %mobilenumber%@domain.com ;
this variable is never replaced by ISE;
I read the ISE User's Guide about that part which explains the Gateway can be an Email/SMS third party service Provider such as clickatell.com ;
but, it would have been more than nice if CISCO could take into account other kind of SMS gateways, especially those based on "off the rack" hard/soft appliances owned by the customer and whose most common way of working is by sending them an email with destination field based on the previously referred format : %mobilenumber%@domain.com ;
Is this a feature that could appear soon in futures ISE releases ?
thanks in advance

Hello, I'm trying with version 1.3.
In "SMTP API destination address:" field I have configured : [email protected]
In body field, I put for example "movil:$mobilenumber$"
Then, when testing, ISE don't put the phone number in "To:" field, but it's ok in the "body" field.
¿I'm doing something wrong or that functionality is not supported ?

Would like to export data from PDF form as plain text for other applications.

If this has been answered, I apologize and hope that someone will point me to the right place to see the answer.
PROBLEM: I have created a PDF form to be filled out and returned via email to specific email addresses. I want that email to show the data being returned as plain or rich text (either will do) in a simple email. I need this because the information will be used in different applications (print, web, etc...). I just need text that can easily be cut and pasted by people not that sophisticated in their use of computers.
I understand this may be a javascript function in the Actions menu of the Submit button. But, I rarely do forms through Acrobat and this is new to me.
Any helpful response is as always, greatly appreciated.
--C

GKaiseril wrote:
"You could export the from data as a tab delimited text file and then import that data into an SQL database"
I could say as I have to do, in detail?
As could do (adobe acrobat) a button(tab delimited text file) to export a completed form from the adobe reader?
greetings and thanks.

Large documents and contents-errors in text - for thesis

Hi - i´ll try to make it short. (quite experinced user on Mac and Pages - but hates Word)
Large document like master/PhD on Pages 09 Version 4.1 (923) (using EndNote X4 for bibliography - but EndNote is not the problem! I tried it without...) - more than a hundred pages. (now with Lion 10.7.2 it seems to be even worse than with SLep).
Content is numbered with up to four "levels" (like: 2.3.1.2 Xxxxxx). I seem to make a lot of things right because the content at the beginning of the document is correct with all the points (just the content is 4 pages long - and everything including the page-numbers is correct) -
BUT:
In the text most "sub-/headlines" or new points are correct - but some are just very wrong like:
it should be 8.3.2.1 - instead it is 8.3.6 or even 2.1 - and everytime i try to change it its just wrong in another or the same way... - but in any case (as long as i am doing it right with tabs and using the right level) the content at the beginning of the document is correct.
That is exactly why i hate Word - it just did the same crap (but Word also mixed up the footnote-numbering - in Pages 09 at least all the foodnotes are right).
Any idea? - the next thing i will try is just to copy every paragraph into a new document - but i doubt that it will help - is there anybody at apple who could help???
Greetings
simplex

I didn't answer either because I found your writing impenetrable and without the file to work with improbable we could talk you through it.
It sounds to me like you have simply skipped a sequence somewhere and it has lost track of the numbering, or you got it to restart somewhere in an attempt to 'fix' your error.
Peter

6 and 8 digits under texting for billing how can I get full numbers

How can I find out what the full phone number is for those 6 or 8 digits showing up under texting

Hey
I'd be happy to help with these 6-8 digit numbers appearing in your usage history! Texts to and from numbers such as these may indicate that the text is to/from a short code. Short codes are numbers used most often by businesses and companies as an easy to remember number. For example, the short code 32665 is associated with receiving Facebook update via text message.
I hope this helps!
Charise

Different rich text/plain text settings for different accounts?

I use Mail for both my work email (MS Exchange) and my personal email (webmail/IMAP). Many of my coworkers use Outlook's rich text formatting options, so I need to have my work emails go out as rich text. However I'd like to have my personal emails go out as plain text.
I can set Mail to create new messages in plain text, but to reply in the same format of the original message. That takes care of everything EXCEPT when I compose a new message using my work address... in that case it goes out as plain text, and my coworkers complain that they can't use formatting, because their copies of Outlook are in turn configured to reply in the same format as the original message.
So ideally what I'd like is to have two different formatting settings for my two different accounts. Anyone know how this might be done? Any plugins, etc., that might accomplish this?

Since you are running Jaguar, Jaguar and Panther Mail do not support composing in HTML and this includes when forwarding a message received that was composed in HTML.
Since Jaguar and Panther Mail do not support composing or forwarding HTML, you can't embed images or photos in the message body anyway.
RTF with Tiger Mail is really HTML and although Tiger Mail does not include an HTML composer/editor, you can copy/paste HTML format from a web page and forward HTML received.
Images/photos and single page PDF attachments are revealed as inline or viewed in place within the body of the message by default which cannot be turned off. This applies to received and sent messages which is not the same as being embedded. Embedded requires HTML and an embedded attachment is not a true attachment. All Mail.app versions render HTML received but you cannot attach a photo or image as embedded with Jaguar or Panther Mail so it doesn't matter if you use RTF or Plain Text in regards to photo/image or single page PDF attachments which appear as inline or viewed in place within the body of the message by default regardless.
When you use Plain Text for message composition, the receiving mail client renders the text in whatever font the reader chooses.
IMO, everyone should use Plain Text for message composition. Messages would be boring to some but the majority if not all problems experienced with email would be eliminated if HTML was banned from message composition.

Regular Expressions for converting HTML to Structured Plain Text

I'm writing a PL/SQL function that will convert HTML to plain text, but still preserve some of the formatting/line breaks. One of my challenges is in writing a regular expression to capture the text blocks while ignoring the markup. I'm trying to write an expression that will grab all of the text between start/end tags, but discard the tags. For example, to find all of the text between a start/end paragraph, I want to do something like:
REGEXP_REPLACE('This is the body of the paragraph', '<p.*>(.*)', '\1||v_crlf' )
where \1 returns the contents of the paragraph and v_crlf (declared earlier in the function) inserts a line break. I know there are more general expressions that will remove all tags, but I want to specifically identify the tags so I can process them appropriately. This way I can easily convert HTML to plain text for email and reporting without having to keep two versions around. Any help would be greatly appreciated. Once I get this worked out, I will repost with the function code for others to use. Thanks.
Edited by: jritschel on Oct 26, 2010 9:58 AM

Here's a function I wrote for an app. I'm not making in promises on it's accuracy as the app was just a proof of concept and never made it to production.
function strip_html( p_clob in clob )
return clob
is
 l_out clob;
 l_test number := 0;
 l_max_loops constant number := 20;
 i pls_integer := 0;
begin
 l_out := regexp_replace(p_clob,' | ',chr(13)||chr(10),1,0,'imn');
 l_out := regexp_replace(l_out,'',chr(13)||chr(10),1,0,'imn');
 l_out := replace(l_out,'<li>',chr(13)||chr(10)||'*<li>');
 l_out := regexp_replace(l_out,'(.+?)','*\1*',1,0,'imn');
 l_out := regexp_replace(l_out,'(.+?)','_\1_',1,0,'imn');
 loop
 l_test := regexp_instr(l_out,'<([A-Z][A-Z0-9]*)[^>]*>.*?</\1>',1,1,0,'imn');
 exit when l_test = 0 or i > l_max_loops;
 l_out := regexp_replace(l_out,'<([A-Z][A-Z0-9]*)[^>]*>(.*?)</\1>','\2',1,0,'imn');
 i := i + 1;
 end loop;
 return l_out;
end strip_html;{code}
The loop is there to handle nested HTML.
Tyler Muth
http://tylermuth.wordpress.com
"Applied Oracle Security: Developing Secure Database and Middleware Environments": http://sn.im/aos.book
Edited by: Tyler on Oct 26, 2010 10:03 AM

Just got a new router yesterday and my husband's iphone and my ipad are asking for a guest password. Don't understand.

Just purchased a new router yesterday since ours got struck by lightning. Now my husband's iphone and my ipad are asking for guest wifi passwords. Don't understand.

Some new routers come with the standard connection as well as a guest account. The guest account can be used for when friends come over and want to use your Wi-Fi connection. You can give them the guest account password and still keep the main account password private. Make sure you are logging on to the main connection and not the guest account.

IPhoto sends emails in Rich format even if the default format is Plain Text

Detailed Summary (wouldn't fit in the Topic Subject):
iPhoto will always send emails in Rich Text format even if Mail application is set to send all emails in Plain Text format. In other words, emails initiated from iPhoto ignore the selected Message Format setting in the Mail application.
Description:
It is a better practice to email photos in the Plain Text format instead of Rich Text format so recipients using different email clients can easily download attached pictures as regular attached files.
The workaround is to change the email format to Plain Text before sending it. This wouldn't be such a problem if you could make this a permanent setting however this is not possible. The Mail application has a specific setting for this but iPhoto simply ignores it. This is the issue I am raising here.
How to reproduce the problem:
1. Open the Mail application (Assuming you already have an email account configured)
2. Go to Preferences, Composing tab
3. Change Message Format to "Plain Text"
4. Optional step to verify that the Plain Text is now the default format: Start a new email. Click on menu Format and you'll see "Make Rich Text" available, which means the current email is in fact in Text Format. Close this email.
5. Open iPhoto
6. Select one or more photos and click on the "Email" icon on the lower right hand side
7. A details popup will open, click on "Compose Message"
8. The Mail application will open as well as a New Email window with the Subject field filled out and the selected photos in the email body
9. Click on the menu Format
Expected: Th last option should be "Make Rich Text" indicating that the current email is in Plain Text format as determined by the Mail settings (steps 1-5 above)
Actual: Last option is "Make Plain Text" which means the current email is fact in the Rich Text format which does not match the Mail application settings.
Can we at least get an acknowledgement from Apple that this is a known issue? Also, is there a fix for this? It is not an acceptable solution to tell users to manually select Plain Text for every email. I am tired of asking people to resend emails that way. That is a workaround, not a solution.
Test details:
- Mail Version 4.4 (1082)
- iPhoto Version 8.1.2 (424)
- OSX Version 10.6.5

iPhoto menu -> Provide iPhoto Feedback to report a bug.
Can we at least get an acknowledgement from Apple that this is a known issue?
Need to ask Apple that one.
Regards
TD

Saving plain text on a mac (Keyboard shortcuts file)

Hi there perhaps some mac users can help me...
I am manually editing the keyboard shortcuts file in TEXT edit on a mac (Im a pc user). I open the file as plain text all the rich text stuff turned off.
(Looked up how to do this.)
I edit one of the shortcuts, no unusual characters etc.
When I restart CC, it gives an error and shows squiggley characters at that line as the problem.
On a pc I just edit and save as plain text and there are no issues...
What am I doing wrong on a mac in Text edit ?
Thanks Alan.

The issue you are encountering might be related to how TextEdit handles line endings? Not sure, but have you tried using the KeyedUp script to edit shortcuts? I used it for CC and it seems to be working fine.
http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&extid=1698043
Hope that helps,
Arie

ISE and SMS in plain text for Guest Credntial notification

Similar Messages

Maybe you are looking for