ISE and SMS notification

Environment
ISE 1.1.2
As already stated in other posts in this forum, it appears there is a kind of limitation when configuring SMS Notification options via the ISE GUI interface under the "Administration ==> Web Portal Management ==> Settings ==> Sponsor ==> Language template ==> English ==> Configuring SMS Text message Notification"  panel :
the Destination field, in this panel, can only contain explicitely the email address of the SMS Gateway;
it cannot contain an email address with the %mobilenumber% variable, such as %mobilenumber%@domain.com ;
this variable is never replaced by ISE;
I read the ISE User's Guide about that part which explains the Gateway can be an Email/SMS third party service Provider such as clickatell.com ;
but, it would have been more than nice if CISCO could take into account other kind of SMS gateways, especially those based on "off the rack" hard/soft appliances owned by the customer and whose most common way of working is by sending them an email with destination field based on the previously referred  format  : %mobilenumber%@domain.com ;
Is this a feature that could appear soon in futures ISE releases ?
thanks in advance

Hello,  I'm trying with version 1.3.
In "SMTP API destination address:"  field I have configured :  [email protected]
In body field,  I put for example "movil:$mobilenumber$"
Then, when testing,  ISE don't  put the phone number in "To:" field,  but it's ok in the "body" field.
¿I'm doing something wrong or that functionality is not supported ?

Similar Messages

  • Remove push and sms notifications during a call

    it is possible to remove audio (push and sms notifications) during a call?
    if not, fix it!!!!

    Sorry but there isn't any options for what you are asking.
    http://apple.com/feedback if you care to suggest it.

  • Email and SMS notifications stop working occassion...

    I recently updated the firmware on my E71 to the latest.  I now have an issue where the email and SMS notifications on the home page periodically disappear.  Once the notification icons have disappeared, I need to restart my device in order to get the icons back again.  This never happened with the old firmware.
    Is this happening to anyone else?  Thank you.

    Sounds like an software issue..
    Perhaps you may wanna try reinstall the firmware on your phone or do the following:
    - A soft reset by keying in *#7780# when on standby - This will not delete any data but will restore all the settings back to default.
    If that does not help then you may wanna try doing a hard reset by keying in *#7370# when on standby - This will reformat the phone. DO NOT FORGET TO DO A BACK UP AS THIS WILL ERASE YOUR ENTIRE PHONE MEMORY.
    The security code by default is 12345
    Message Edited by kingpin007 on 21-Feb-2009 02:14 PM
    Mark me a KUDOS if this has helped...

  • ISE and SMS in plain text for Guest Credntial notification

    I have configured a SMS notification for the Guest Credential.
    When the SMS gateway receive the message, it's discarded because it's not in plain text, it's contains some HTML tag.
    We haven't the possibility on the SMS gateway to modify the received message.
    On the ISE I seen that we can choose  the email format only for the system alarm settings and no for SMS message.
    Correct ?
    It's possible to send the message in plain text !!!!
    thank you

    I think it only use HTML.
    Step 6 Type the email body in the Layout text box. This contains the account login information for the guest user.
    You can use HTML tags and special variables for formatting the language template for e-mail notification. The following is an example of the login information for the body of an email in an English language template:
    Welcome to the Guest Portal, your username is %username% and password is %password%
    Jatin Katyal
    - Do rate helpful posts -

  • ISE and SMS integration, how to configure

    Hello folks,
    I wonder what I have to do in ISE to enable it sending SMS when activating a new guest account. I believe there must be a corresponding setting somewhere under Web Portal Management to configure SMS gateway neither under Global system settings.

    This issue has not been resolved ( %mobilenumber% variable is not inserted into address %mobilenumber%@domain.net).
    We opened case on this issue, but it is not yet resolved .
    But support working in this direction - is already fixed problems with subdomains (@sms.domain.net) and restrictions on the number of characters after symbol @.
    This issue we have resolved as follows: all notifications are sent to corporate e-mail Microsoft Exchange Server, where rule is configured to process messages sent over e-mail/SMS gateway (based on field *Destination in template "Configure SMS Text Notification"). According to this rule, Microsoft Exchange sends these messages to another server that is running a regular "Microsoft SMTP Service" ( for receiving and storing messages in a local folder). The same connector is configured to send messages for @sms.domain.net back to the mail server Microsoft Exchange. In the scheduler is configured launch PowerShell script that "cuts" from the body of the message variable %mobilenumber% (which was previously defined in template "Configure SMS Text Notification") and inserts it into address %mobilenumber%@sms.domain.net.mobilenumber%@sms.domain.net.
    When the problem is resolved, this server will not be used/needed, and SMS message will be forwarded directly to the gateway e-mail/SMS or in SMSC.
    Sincerely,
    Andrey

  • Email and sms notifications

    One feature I would like to see on the iPhone is the ability to control its behavior based on external factors.
    For example,
    - At night I want my phone to shut up. No email or sms notifications, and to only ring if call is from someone I care about.
    - When I have wifi I want it to check for emails frequently, but when I am using 3G I want to check manually (my SP charges for email traffic)
    As a result, I am forced to choose the least common denominator - always check email manually, and never notify on new email or sms.
    As far as I can tell, there is no way to do this automatically (sure, I can go into settings each time, but what a pita).

    http://www.apple.com/feedback/iphone.html

  • Multiple Mail and SMS Notifications Even After Reading

    Is it normal to get repeat notifications of Email messages and SMS messages?
    The "repeat alert" setting under Settings>Messages is set to off, but I nevertheless receive two distinch audible or vibratory alerts (per message) whenever I get an email or SMS.
    The second message occurs *even after I read the email or sms*.
    Thanks for any ideas.
    iPhone 4/OS 4.02

    switche of stamnia did not help, but i think i found the troublemaker:
    i disabeld every app to get the notifications (security->notifications) and then it worked everytime - then i activated all the apps that i need (there where two left overs - apps that i allowed to fetch notifications that i don´t use anymore....) and it still works.
    the two apps are:
    -floating notifications
    -Garmin connect
    i don´t like to test the both if one is the bad boy and the other one not...but now it seems to work!

  • Can the Curve output the ringtones and SMS notifications to headphones or to an externally connected speaker?

    Ok, here's the deal. I'm a network engineer, and my company uses a monitoring system which sends SMS text messages to pre-defined corporate cellphone numbers when something requires an engineer's attention. My problem is that I'm a VERY deep sleeper (laugh if you must; I need three separate alarms to wake up in the morning), and my current phone's speaker (a Curve 8310) is simply not loud enough to wake me up. Nor is any other phone, I would imagine. Not unless it has a 30-minute ringtone.
    So my question is, can the Curve, when connected to an external speaker or a pair of headphones via 3.5mm audio cable, output its ringer or its SMS notification tones through the audio jack to the speaker/headphones in addition to (or instead of) the phone's built-in speaker?

    eh, you never know... I've had people thank me PROFUSELY, before, for giving them those loud tones, but of course they tried them first
    Your Alarm tone can be as long as you want... Mine repeats until I touch the screen, then I have a one minute snooze. I use a loud tone also, because most would never awaken me.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • IPhone 3G and SMS Notifications

    Hi,
    I just updated my iPhone 3G to the 3.0 firmware. I went into Settings > General > Messages and disabled auto-preview but kept "Repeat Alert" on YES. If I receive a text message while I'm away and my phone is on sleep mode, when I hit the power button to slide to unlock I see the message "First Name, Last Name - Text" and then when I slide my finger across to unlock it my iPhone immediately opens the message instead of just going to the home screen with a red balloon showing 1 new text message. Can someone please help me with this?
    I don't want my phone automatically opening my messages when I slide my finger across to unlock it. I currently have no other custom applications on it. When I was on 2.2.1, I did not have this problem so I'm not sure if there's a setting I need to switch on or off.
    When I'm on a call or using Safari and I receive a message, it says "Close" or "Respond". When I hit "Close" then when I navigation to the home screen then it shows 1 new message waiting, which is what I'd like it to also show even when my phone's in sleep mode. Any ideas?

    lets say we are on the phone talking and my mom sends me a text message. my phone vib and tells me i have a new message but it makes a noise like a cd is skipping in my ear. is this common and happening to anyone else?

  • Silent email and sms notifications after upgrade to iOs 5.1

    After upgrade to iOs 5.1 my iPhone 4S makes no sound when arrives an email or a sms. Is it a bug??

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Has any of this been tried?

  • I want to integrate SMS gateway to Cisco ISE 1.2 and my question is SMS notifications are supported for Guest self−registration

    I want to integrate SMS gateway to Cisco ISE 1.2 and my question is 
    SMS notifications are supported for Guest self−registration Services ? or it should be done by Sponsor 

    I'm not sure I understand the question.  Do you want to log in to the Sponsor Portal using AD credentials?
    Create an Identity Source Sequence using AD as an Authentication Source.  Go to Administration > Identity Management > Identity Source Sequences.  Either Edit or +Add a Sequence and choose from the Authentication Sources shown.
    Then choose that Identity Source Sequence by going to Administration > Web Portal Management > Settings.  Double-click Sponsor from the Left Menu and click Authentication Source.  Choose the Identity Source Sequence.  Click Save.
    I hope this helps.
    Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question.  Otherwise, feel free to post follow-up questions.
    Charles Moreton

  • SMS Notification Issue with ISE 1.3

    We have a problem with SMS notification. Please find the attached snapshot of current SMS email gateway configuration. Guest is receiving notification when I am providing the exact mobile number instead of 974$mobilenumber$ in SMTP API destination address: field.
    We are running ISE 1.3 with patch level 2.
    We are using the  the default option (Global Default) SMS Gateway providers for our configuration rather creating a custom. Any luck??
    Also i would like to notice If the guest portal is a self-registration portal, we can choose the providers. But there is no such configuration if it’s a sponsored guest portal. Please find the second attachment.

    [email protected] is addressed by CSCtu25982. We do not put $mobilenumber$ while defining a SMTP-to-SMS gateway.
    <Prefix>[email protected] is being addressed by CSCus78802, which is being included in ISE 1.3 patch 3.

  • N9, missing SMS and chat notifications during musi...

    Hope somebody can help, as I've spent many hours Googling for the solution.  Just got a new N9 64Gb, learning to find my way around.
    I have a huge problem with notifications.  Basically my phone is my MP3 player for my lifestyle.  I'm trying out free Sigma player since it plays by the folder.  With incoming phone calls, music stops and a ringtone comes through.  Not the case with SMS and chat notifications.  As long as music is paused, I hear SMS/chat notifications.  Nokia music player does the same thing.  N9 earbuds or 5800 earbuds, no difference.  Unless I'm staring at the screen, I miss SMS and chats.
    With 5800, I was able to listen to music/audio books all day (used FolderPlay), and SMS and chat notification interrupted the playback no problem.  I don't seem to be able to do the same with N9.  Is there a solution to this?  Am I missing something in the settings?
    I'm getting desperate.  Help?

    Hi,
    Welcome to the forum!
    You can try the following solutions:
    1. Uninstall and re-install the application.
    2. Update the application. If there's an available update.
    If it's still the same, then it's best to coordinate your concern with the publisher of the application. They'll be able to help you with your concern. 
    You can visit this link for the contact details of the publisher. The contact details are shown below the description: http://store.ovi.com/content/223031?clickSource=search&pos=1
    Note that you can also use the phone without the said application. 
    Hope this helps. 

  • Email notification while screen is locked similar to missed calls and SMS

    Hi
    I would like to know if anyone has found a way to have the iphone notify its user that emails are waiting for them to read on the locked screen similar to the way missed calls and SMS messages pop up when received.
    If not - can someone at Apple please come up with a way to do this? I don't like having to unlock the phone to check to see if new emails are waiting for me.
    Thanks,
    Oliver

    There is not a way since this is not an option with the iPhone. You can have the new mail sound and vibrate enabled for when a new message is received.
    You can use this link to provide Apple feedback.
    http://www.apple.com/feedback/iphone.html

  • SMS Notification Won't go Away

    Hi all,
    I'll go ahead and post everything i did up until the point where i first encountered the problem (all of the following occurred within 3 hrs)
    So i got my Sprint blackberry Tour 9630 over a month ago and had the 5.0OS. There was an upgrade to install (5.0.xx.xxx) and i went ahead and installed it.
    After installing the newest OS i saw that there was a notification coming from my "Social Networking" > "Facebook"
    At this point i wanted to go ahead and delete the Facebook app from my phone since checking it from the default browser is a lot better than the application. I went into the application settings and deleted facebook from my phone at which point it prompted me to restart my phone.
    I restarted my phone. It made me go through the initial setup (teaches you how to use the trackball etc). I decided to skip this part.
    HERE is the part i need help with....................
    I had an SMS notification letting me know that i had a new text. However, when i opened SMS i could not see any unopened items. I scrolled down through all my messages and nothing! I decided to delete all my threads of text messages to see if this would fix the problem BUT it didn't! I figured that i needed to restart the phone once again in the hopes that it would recognize that there indeed was no new sms message.
    On the second restart attempt:
    I skipped initial setup again and now had  an SMS Notification for 2 text messages. I opened SMS and saw 0 messages (i had already deleted them all).
    I tried connecting it to my desktop manager and manually cleared all the data within SMS and MMS (in case MMS was secretly the culprit) and the notification is still there!
    Is there anything i can do? I know it's not a big deal but having my phone always telling me that i have new SMS messages will be deceiving and eventually frustrating.
    Any help would be much appreciated.

    Welcme to the cmmunity supprt frums
    1. Try going to your message folder... press option or menu button.... go to view folders and delete each section. (including sent files)
    2. Check your voice mails and make sure there are not any unlistened to messages.
    3. Erase your missed calls. 
    4. Try removing your battery - then replacing it - allwing your phone to reboot.
    This is just a start.... 
    Nurse-Berry
    Follow NurseBerry08 on Twitter

Maybe you are looking for

  • How long does Photoshop CC take to install?

    It's at 14% and taken an hour and a half to get that far. This is BS for just one app. Help?

  • Why won't my App Store open? (OS X 10.8.4)

    Whenever I try to open my App Store, the App Store appears but immediately crashes. I am really bummed out because I can't do updates and get apps! Can anyone help me Here is the crash report: Process:         App Store [3255] Path:            /Appli

  • Shared Review Publish function not available

    I'm using Adobe Pro 9 (9.2.0) to create a Shared Review using a network folder.  I am able to create the file correctly and SOME people are able to use Acrobat Reader 9.2.0 to Publish comments.  The Publish function does not show up in Acrobat Reader

  • After update my epson scanner software stopped working

    After update my epson scanner software stopped working In Image Capture, when scannig i have this bug https://dl.dropboxusercontent.com/u/733136/scan%20bug.mov Can someone please test this Thanks Pedro Molinar

  • Product categories Central contracts as SOS in SC

    Hello, We are implementing SRM 7 Level 9 with extended classic scenario. We have created central contracts with items with Products categories only. Those central contracts do not appear when the requester has selected the same product category in th