ISE continue to receiving authentication message after removed the radius host test configuration on a IOS router
I have two issues but related and need help:
anyone know how to disable or stop a radius host test message send every seconds from a IOS router after the test statement removed and all radius server information removed from the configuration? I have this odd testing for the new ISE server. the purpose of testing is not for load balancing, but find out if IOS support different protocol using radius other than PAP if PPP is not used. after the test, I cannot stop it. I have a case opened with Cisco, the answer is no way to stop it other than reboot the router. I tried to remove aaa new model and add it back, no help. I have put an access-list on the LAN interface deny the IP any to the radius host and port, no match found.
On the ISE (version 1.1.1), due to the IOS router test cannot be stopped, the alive authentication page fills up all the authentication failure messages. anyone know how to block the host from ISE live authentication log (the router has been removed from the device page)?
below is part of messages from the IOS router (version 15.0.1M6) debug. where 10.2.2.144 is the ISE IP and totally removed from the config. there is no any radius or the ISE IP in the config.
Aug 28 10:21:15.384: AAA/SG/TEST(Req#: 1): Sending test AAA Access-Request.
Aug 28 10:21:15.384: AAA/SG/TEST(Req#: 1): Sending test AAA Accounting-Request.
Aug 28 10:21:15.384: AAA/SG/TEST: Verifying if further testing required to determine server state.
Aug 28 10:21:15.384: AAA/SG/TEST: DEAD state verification already in progress for server (10.2.2.144:1645,1646).
Aug 28 10:21:15.384: AAA/SG/TEST: Server (10.2.2.144:1645,1646) assumed DEAD. Dead time updated to 60 secs(s).
Aug 28 10:21:33.752: AAA/SG/TEST: No Test response from server (10.2.2.144:1645,1646)
Aug 28 10:21:33.976: AAA/SG/TEST: No Test response from server (10.2.2.144:1645,1646)
Aug 28 10:21:33.976: AAA/SG/TEST: Necessary responses NOT received from server (10.2.2.144:1645,1646).
Aug 28 10:21:33.976: AAA/SG/TEST: Server (10.2.2.144:1645,1646) marked DEAD. Dead time set for 60 sec(s).
Aug 28 10:21:33.976: AAA/SG/TEST: Server (10.2.2.144:1645,1646) removed from quarantine.
Aug 28 10:22:33.976: AAA/SG/TEST: Verifying if further testing required to determine server state.
Aug 28 10:22:33.976: AAA/SG/TEST: Server (10.2.2.144:1645,1646) quarantined.
Aug 28 10:22:33.976: AAA/SG/TEST: Sending 1 Access-Requests, 1 Accounting-Requests in current batch.
Aug 28 10:22:33.976: AAA/SG/TEST(Req#: 1): Sending test AAA Access-Request.
Aug 28 10:22:33.976: AAA/SG/TEST(Req#: 1): Sending test AAA Accounting-Request.
Aug 28 10:22:33.976: AAA/SG/TEST: Verifying if further testing required to determine server state.
Aug 28 10:22:33.976: AAA/SG/TEST: DEAD state verification already in progress for server (10.2.2.144:1645,1646).
Aug 28 10:22:33.976: AAA/SG/TEST: Server (10.2.2.144:1645,1646) assumed DEAD. Dead time updated to 60 secs(s).
Aug 28 10:22:52.760: AAA/SG/TEST: No Test response from server (10.2.2.144:1645,1646)
Aug 28 10:22:53.176: AAA/SG/TEST: No Test response from server (10.2.2.144:1645,1646)
Aug 28 10:22:53.176: AAA/SG/TEST: Necessary responses NOT received from server (10.2.2.144:1645,1646).
Aug 28 10:22:53.176: AAA/SG/TEST: Server (10.2.2.144:1645,1646) marked DEAD. Dead time set for 60 sec(s).
Aug 28 10:22:53.176: AAA/SG/TEST: Server (10.2.2.144:1645,1646) removed from quarantine.
Aug 28 10:21:15.384: AAA/SG/TEST(Req#: 1): Sending test AAA Access-Request.
Aug 28 10:21:15.384: AAA/SG/TEST(Req#: 1): Sending test AAA Accounting-Request.
Aug 28 10:21:15.384: AAA/SG/TEST: Verifying if further testing required to determine server state.
Aug 28 10:21:15.384: AAA/SG/TEST: DEAD state verification already in progress for server (10.2.2.144:1645,1646).
Aug 28 10:21:15.384: AAA/SG/TEST: Server (10.2.2.144:1645,1646) assumed DEAD. Dead time updated to 60 secs(s).
Aug 28 10:21:33.752: AAA/SG/TEST: No Test response from server (10.2.2.144:1645,1646)
Aug 28 10:21:33.976: AAA/SG/TEST: No Test response from server (10.2.2.144:1645,1646)
Aug 28 10:21:33.976: AAA/SG/TEST: Necessary responses NOT received from server (10.2.2.144:1645,1646).
Aug 28 10:21:33.976: AAA/SG/TEST: Server (10.2.2.144:1645,1646) marked DEAD. Dead time set for 60 sec(s).
Aug 28 10:21:33.976: AAA/SG/TEST: Server (10.2.2.144:1645,1646) removed from quarantine.
Aug 28 10:22:33.976: AAA/SG/TEST: Verifying if further testing required to determine server state.
Aug 28 10:22:33.976: AAA/SG/TEST: Server (10.2.2.144:1645,1646) quarantined.
Aug 28 10:22:33.976: AAA/SG/TEST: Sending 1 Access-Requests, 1 Accounting-Requests in current batch.
Aug 28 10:22:33.976: AAA/SG/TEST(Req#: 1): Sending test AAA Access-Request.
Aug 28 10:22:33.976: AAA/SG/TEST(Req#: 1): Sending test AAA Accounting-Request.
Aug 28 10:22:33.976: AAA/SG/TEST: Verifying if further testing required to determine server state.
Aug 28 10:22:33.976: AAA/SG/TEST: DEAD state verification already in progress for server (10.2.2.144:1645,1646).
Aug 28 10:22:33.976: AAA/SG/TEST: Server (10.2.2.144:1645,1646) assumed DEAD. Dead time updated to 60 secs(s).
Aug 28 10:22:52.760: AAA/SG/TEST: No Test response from server (10.2.2.144:1645,1646)
Aug 28 10:22:53.176: AAA/SG/TEST: No Test response from server (10.2.2.144:1645,1646)
Aug 28 10:22:53.176: AAA/SG/TEST: Necessary responses NOT received from server (10.2.2.144:1645,1646).
Aug 28 10:22:53.176: AAA/SG/TEST: Server (10.2.2.144:1645,1646) marked DEAD. Dead time set for 60 sec(s).
Aug 28 10:22:53.176: AAA/SG/TEST: Server (10.2.2.144:1645,1646) removed from quarantine.
Thanks in advance,
It seems reload is the only way to fix it. I don't think there is any way to stop or ignore messages for specific host in live authentication page of ISE. From security point of view it is required to logs all the authentication hits.
Regards,
~JG
Do rate helpful posts!
Similar Messages
-
After updating, as requested, each time I select iPhoto, the system is requesting that I download the iPhoto upgrade. I have downloaded this several times. However, I continue to receive this message. Please help me resolve this issue.
Can you give us the exact error message you get?
-
received a notice that could not use photo stream unless I updated my software. Went to apple preferences/icloud to disable photo stream. Not allowed to do so. What do I do to disable so I won't continue to receive annoying messages from apple/icloud
I think you can solve your problems by removing your AppleID email address from BOTH the Messages setting on your iPhone and the iMessages settings on your Mac.
On iPhone:
Settings > Messages > iMessage > Dissabled
Settings > Messages > Send & Receive > touch the "(i)" < touch "Remove This Email"
On Mac:
Open "Messages" application
Click "Messages menu > Preferences
Click "Accounts"
Select your AppleID account
Under the "You can be reached for messages at" settings, uncheck your AppleID email address and your phone number
Then uncheck the "Enable this account" setting
And lastly, ask all of your friends with iPhones to delete all iMessage conversations (blue bubbles) in their entirety.
To test, send a friend a new text using their phone number (not their email address) and watch the color of the bubble. If it's green then you are using SMS. -
Experiencing issues sending/receiving MMS messages after updating to iOS 6
I, like so many others, have been experiencing problems sending/receiving MMS messages after updating to iOS 6. Other than that, I really do like the new update. I have an iPhone 4S with Verizon. I have been to Verizon, and the issue is not with my plan; it is definitely with the update. My friend updated her phone also, but her phone is just the iPhone 4. She does not experience these issues. Is Apple aware and trying to fix the problem? It is soooo frustrating! I cannot send/receive picture messages, nor can I send/receive group messages. --- Has anyone come up with a solution to fix it yet, or is it something that Apple will have to do?
Thanks in advance.I also am having the same problem. I can't send a pic to anyone who doesn't have iMessage. Also, I don't always get the alert when I have a new message. I never had this problem before I updated to IOS 6. I have AT&T & an iphone4. It's isn't jail broken. I've been reading forums for a couple weeks now and apparently it has something to do with the apn. And I don't know how or even if I can change it. Then I also read it might have something to do with a damaged SIM card. And it might have been damaged when we updated. But those are just theories.
-
Unable to send or receive text messages after updating iOS to 7.0.2
I am unable to send or receive text messages aftering updating to iOS 7.02. I have an iPhone 4S. I have run all the suggested troubleshooting still can't text. I have been to my carrier, AT&T, there is no issue with my account. AT&T suggested resetting the phone to factory defaults (thereby wiping it clean). I am trying to avoid that as I had issues with transferring data & contacts before. Any one have a work around?
Try this iMessage workaround
Look for a fix by Apple by the end of the week..... -
Why do I continue to receive notifications, even after I change my preferences?
why do I continue to receive notifications, even after I change my preferences? I had about 100 or so today. I switched all of my notification anwers to NO, as in , I don't want to receive any email from apple communities whatsoever. ??? Thanks.
You need to double check that you aren't subscribed to the community, not just to the question you asked. Go to the community that you are receiving the emails from and the same box called "Actions" will appear there just like it does next to the individual question. Make sure that you are not reciveing email notifications for that community. Probably the community where you asked your question. Typically that is what causes people to get 100's of email notifications. I think that this is not included in the tutorial so a lot of people miss it.
Hope that works for you.
laverne's mom -
i receive a message saying that 'the sim card inserted in this phone does not seem to be supported. Has anyone experience anything similar?
Try removing your sim and insert it again and make sure that its clean as well as the sim tray. insert it seucrely locked in place. See if it works, quick fix. If not try to use a different sim or try your sim to a different h/s. For you to be able to isolate if its with your sim or iPhone. Tricky Tips!
-
My 120GB IPod classic is not recognized by my Windows 7 PC. When I plug the ipod into my computer I receive a message saying that the USD device is not recognized. The Device Manager lists it as an Unknown Device. I've tried uninstalling iTunes and reinstalling it, but it had no affect. The odd thing is that our other iPod (160 GB Classic) is recognized on the same computer using the same USB cable. When I plug the ipod in question into another PC, the PC seems to recognize the iPod and lists it in Windows Explorer (iTunes is not installed on this machine). There seems to be something out of wack with this PC/iPod combo. Any thoughts on what I can do to try to resolve this issue? I tried all of the steps listed here, but they didn't help me. http://support.apple.com/kb/TS1538
Any help would be greatly appreciated.Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the PC?
How to reset iPod
Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock -
I get an error message after downloading the latest itunes update. It says to download only and then to manually install. How do I do this? Or, is there some way to make the download work? Thank you.
The message is 'errors have occurred, go to tools>download only and try installing manually'. BTW, I am using Google Chrome.
-
I get the following error message after installing the latest version of itunes via auto update: "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?
Hi pholewinski!
I have a couple of articles for you here that I believe will help you with this issue. The first is an article on advanced troubleshooting, and it can be found here:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
If following that article's steps doesn't take care of the issue, you can try the things listed in this article, which is about permissions issues in iTunes:
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
Automatically highlight the next message and remove the "unread" status
In my inbox on Ipad, when I swipe and delete a message or highlight the message and hit the delete icon in the upper right corner, it will automatically highlight the next message and remove the "unread" bullet next to the message. This is version 7.1. Is there a way tnot to have your messages marked as unread when you haven't read them yet?
You can hit the small flag icon and mark it as unread yourself.
-
How do I cancel a Newsstand subscription when there is no auto-renew option via Settings/Manage Subscriptions? After removing the item from the Newsstand site it still shows as Active via Settings/Manage Subscriptions. The publisher tells me it is not a subscription rate that is theirs, they have no knowledge of it, I subscribed through iTunes Store. Thank you!
Hi qwerty,
Dun tink that creative customer support sucks cos I had been dealing with them in the past and I can say that their service are quite gd and fast. If you wanted a refund, I tink you need to contact the store that sells you the product. Dun tink creative will refund you though. -
Table disabled after removing the last record
After removing the last row of table and disables it is unable to select any record.
Version: JDeveloper 11.1.1.2.0Problem solution
my backBean:
protected void limpaSelecaoDaTabela() {
if (usaPopup)
if (table != null)
table.setSelectedRowKeys(null);
protected void limpaSelecaoDaTabela() {
if (usaPopup)
if (table != null)
table.getSelectedRowKeys().removeAll();
} -
I have a new iPhone 4 which I cannot sync until I upgrade to the latest version of iTunes software (version 10.2.2). Upon trying to upgrade, I keep receiving a message which states, "The URL could not be opened." Anyone else had the same problem & does anyone have a solution? Would like to try other easier option(s) before uninstalling & installing newest version.
You need to buy and install a Mac OS X 10.6 DVD.
(96040) -
I cannot log in my account but can as a guest even after removing the password
i cannot log in my account but can as a guest even after removing the password
Hi Kabiru,
Thanks for visiting Apple Support Communities.
You may want to use the steps in this article to reset your user account password:
OS X: Changing or resetting an account password
http://support.apple.com/kb/HT1274
Best,
Jeremy
Maybe you are looking for
-
I have read all of the other postings and they haven't helped. When I ran diagnostics here is what I got: Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601) Dell Inc. Inspiron 5720 iTunes 11.0.4.4 QuickTime not available FairPla
-
My contacts on my iPhone are organized in different groups. I have downloaded a trade show app which gives infos on the exhibitors of the show. It offers to create new contacts from these info. Is there any way to save these new contacts in a specifi
-
Disable explicit content in iTunes store on iPad
In iTunes preferences on my Mac I can go to Parental Preferences and click on restrict explicit content, how do I do the same thing for the iTunes store on the iPad? I know how to restrict explicit content from being played on the iPad, but I can't s
-
How do i get to a previous backup
I need to restore a previous icloud backup. How do I do that?
-
Fn shortcuts and blue thinkvantage button not working
The Fn+F2, Fn+F5, and Fn+F8 shortcuts are not working on my computer, yet the Fn+F3 and Fn+F4 shortcuts are working. The other ones used work as well but now aren't and I'm not sure why. They blue Thinkvantage button up by the volume also used to wor