ISE dashboard - CPU, memory - data not available for PSN

Hi All,
Has anyone seen the ISE dashboard not showing stats for CPU memory for PSN's ? Admin node cpu and memory displays ok.
How is this data shared between the nodes ?
I did have some firewall issues between admin and PSN but this is now solved. I did note the same issue even when nodes were on same L2 network.

Confirmed this issue was caused by syslog dropped by firewall. Symptoms included dashboard wasn't updating for that node, and also no auth logs getting back to monitoring node.
ASA was permitting UDP 514 (syslog) but not UDP 20514.
I'm a bit confused on UDP 30514. In the guide it also says 30514 is syslog in one spot, and radius in another.

Similar Messages

Software metering date not available for selection sccm 2012

Hi
I have installed SCCM 2012.
While viewing a report for software metering date and year are not available for selection. they are blank.

thaks
I is showing after restart.
Now there is another problem.
When I see the software metering report for enabled rule i.e. KasperskyAdminKit I can not understand the figures
Computers that have run a specific metered software program
NetBIOS Name
Installed Site Code
Last Usage
Total Usages
Average Usages per Day
Total Duration (min)
Average Duration of Use (min)
Average Duration per Day (min)
WIL-WNR-AV
PUN
11/16/2012 5:13:35 PM
1
0.03
7384.27
7384.27
246.14
How to know the the explanations for the underlined items ?

Data not available for a particular field - when exectuing report on MP

hai sdn,
I am executing a report on multiprovider where 3 ods's are linked.i'm getting data into all the fields except for one field.(sales doc type).I have checked all my linking in the identification also. i cross checked by using the Tcode : listcube and executed the report - here i'm getting the data but in the report i'm not getting.Can any one help me out with this.
Itz urgent..................
Thanks in advance.

Hi Sunita,
0DOC_TYPE has key and text in the (business explorer Display), but you are saying you have it as text and key. Make it inline with what is there in the info object definitione.
Note you have 2 options in Extras of the multiprovider.
1. Key and Text
2. Text and Key.
Hope this helps you.
Regards
Ananth

New DSO data fields are not available for transformations in the upwardflow

Hello,
There are data flow from
many source DSOs -> Target DSO -> Final DSO.
Different transformations are defined and activated with DTPs. This works fine and provides the desired results.
now new fields are added to the target DSO, final DSO and one of the source DSO.
When I now try to edit the transformations, the new fields are not part of the sources at the different stage.
The fields are available in the Data Source created out of a DSO but not directly when using a DSO as a data source.
Have anyone faced such a problem?
any solutions to this?
- I cannot delete all the other transformations as this is too much work to do and there is no time for it.
Regards
Kannan

We created ZMD_BS_MAT_OVP_LAYOUT. But the situation has not changed - the fields are not available for edit.

Problem updating to iphoto 9.6 after upgrading to Yoesmite I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc

problem updating to iphoto 9.6 after upgrading to Yoesmite I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc

"This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled." ?
This error message will appear erraneously, if you skipped the update to Mavericks and iPhoto 9.5.1 and went straight from an earlier MacOS X version to Yosemite, without first updating to iPhoto 9.5.1 and associating iPhoto to your AppleID.
Try first to buy iPhoto with your AppleID instead of updating. Delete iPhoto from Applications, but don't empty the Trash, then go to the main page of the App Store and search for iPhoto. If you are lucky, it will show as free and you can buy it directly.
If iPhoto is not showing as free, there is no help but contacting the App Store Support: Ask for a redemption code. You will need to provide a prove of purchase for your mac with iPhoto preinstalled.
http://www.apple.com/support/mac/app-store/contact/

If the data network is not available for some time, to get it again we need to restart the phone instead it is not finding the data network instantly. why cant the iphone searches data net work offten if not available. i am totally disappointed with this!

If the data network is not available for some time, to get it again we need to restart the phone instead it is not finding the data network instantly. why cant the iphone searches data net work offten if not available. i am totally disappointed with this!

Still it could not find the data network.it searches for voice network instantly and works too. but even full voice network available, there is no data network.when i restart the phone it could find data network.
Already i reset network settings for two times.

Data Not Available. Statspack data is not available for this database insta

Hi,
while trying to configure the 9i db on grid control I installed the statspack data while configuring it. But now when I try to see the historical data as part of the performace tab for the 9i db it complains as below
Data Not Available. Statspack data is not available for this database instance. Make sure that Statspack is installed on the target instance.
Please shed some of your inputs.
thanks in advance
PK

Hi,
I think it is not installed.
Using 1097660794 for database Id
Using 1 for instance number
, stats$database_instance di
ERROR at line 9:
ORA-00942: table or view does not exist
I did exactly as it said while configuring the db. but seems like something is wrong. Can you please advise me on how can I install it in commandline.
Thanks
PK

Position 1000001 not available for the start date of the infotype record

Dear Experts/Gurus,
I am getting the following error message "Position 1000001 not available for the start date of the infotype record" while trying to upload employees HR Master data in PA40.
I know the reason why because the position is created on 01.05.2009 & employee DOJ is 01.02.2006 both are mismatch & the position date has to be changed earlier date than DOJ but i don't know how to do.
Please let me know how to sort out this issue asap.
Rgds,
Vikrant

Dear Friend,
Use PP02, select the position no, select infotype 1000 (Object), select planning status & validity(date) and then use the copy function to change the start date.
Regards,
Aks

DS/SAP - DATAFLOW - This is less than(or equal to) the virtual memory 1609564160 bytes available for caches.

Hello,
my project is displaying the following error, when you generate a TXT record with 3 million.
I have a project that when executato DS goes to a Z table in SAP selects every record in this table (+ 3 million), and on DS it generates a TXT file separated by semicolons (;). But the DS is not getting serar this file with more than 3 million record, the DS displays the following error:
(12.2) 02-21-14 10:06:27 (2996:2952) PRINTFN: INFO - Definicao da $G_FF_Diretorio_OUT = C:\DS_Neogrid\Upload\QAS
(12.2) 02-21-14 10:06:27 (2996:2952) PRINTFN: INFO - Definicao da $G_FF_Diretorio_OUT = C:\DS_Neogrid\UpLoad\QAS
(12.2) 02-21-14 10:06:27 (5928:3040) DATAFLOW: Process to execute data flow <DF_TransfArq_035> is started.
(12.2) 02-21-14 10:06:27 (5928:3040) DATAFLOW: Data flow <DF_TransfArq_035> is started.
(12.2) 02-21-14 10:06:27 (5928:3040) DATAFLOW: Cache statistics determined that data flow <DF_TransfArq_035> uses <0> caches with a total size of <0> bytes. This is less
than(or equal to) the virtual memory <1609564160> bytes available for caches. Statistics is switching the cache type to IN
MEMORY.
(12.2) 02-21-14 10:06:27 (5928:3040) DATAFLOW: Data flow <DF_TransfArq_035> using IN MEMORY Cache.
Can anyone help me...
Thank you.
at.
Wagner

Error of the border of error of job.
(12.2) 03-06-14 08:41:54 (W) (1392:6492) SYS-170114: /JB_35_Neogrid_DimDemPrimaria/DF_TransfArq_035
Warning: Your system is running low on process virtual memory space. Available virtual memory is <22> megabytes.
(12.2) 03-06-14 08:41:55 (W) (1392:6492) SYS-170114: /JB_35_Neogrid_DimDemPrimaria/DF_TransfArq_035
Warning: Your system is running low on process virtual memory space. Available virtual memory is <22> megabytes.
(12.2) 03-06-14 08:41:56 (W) (1392:6492) SYS-170114: /JB_35_Neogrid_DimDemPrimaria/DF_TransfArq_035
Warning: Your system is running low on process virtual memory space. Available virtual memory is <22> megabytes.
(12.2) 03-06-14 08:41:57 (W) (1392:6492) SYS-170114: /JB_35_Neogrid_DimDemPrimaria/DF_TransfArq_035
Warning: Your system is running low on process virtual memory space. Available virtual memory is <22> megabytes.
(12.2) 03-06-14 08:41:58 (W) (1392:6492) SYS-170114: /JB_35_Neogrid_DimDemPrimaria/DF_TransfArq_035
Warning: Your system is running low on process virtual memory space. Available virtual memory is <22> megabytes.
Characteristics of our server.
It will be necessary to increase the virtual memory virtual?
at.
Wagner

N81 8GB Phone memory is not available !!!

I am using N81 8GB. So far I know brand new N81 8GB has 16MB of free internal memory and somewhat 8GB of free external memory (where internal memory in the phone memory and external memory is the memory card.
Last three months it was asking me “Phone Memory” is out of space whereas I used only 2GB out of 8GB mass memory. I installed everything in Mass memories. Recently it was asking me , Phone memory is not available. I used “OVI suite” with cable and found 24MB already used 0(zero) space available. Then I deleted all programme, music, video and and others from “Mass memory” and formatted it. Even deleted everything except default program. Then I flashed the Mobile from OVI update suite. Version has changed but found 21MB is occupied out of 24MB. Now tell me what’s the solution to free the spaces?
I can’t receive more than 3 or 4 music (small) files via Bluetooth. It asks me to free the inbox space. So far I had total 10 text message (SMS) in inbox. Why it should ask me whereas I have enough memory( 6GB) in “Mass Memory” ?
Is there any solution?
Solved!
Go to Solution.

At last my N81 8GB Phone memory problem is solved by using the command
First Step: Format phone (R E S 0 ?)>>>
*#7370#
Second Step:    Factory Reset (R S T 0 ?)>>>
*#7780#
After contact address sync from OVI.com , Now Phone memory is
7.48MB used
16.9MB free
total = 24.4 MB
Usefull help for N95 and N81 codes:
*#06# ............ IMEI number (International Mobile Equipment Identity)
*#0000# ......... Firmware version and date, Phone Model and Operator Variant
*#92702689# ... Life timer (W A R 0 A N T Y) - Total time your phone has spent sending and receiving calls.
*#62209526# ... Wireless MAC Address (M A C _ W L A N)
*#2820# .......... Bluetooth MAC address (B T A 0?)
*#7370# .......... Format phone (R E S 0 ?)
*#7780# .......... Factory Reset (R S T 0 ?)
Thanks for your help that's why I found that code form online.
Keep Smiling

Data not available in infocube

hi all,
I havae an Infocube for which data is coming from the ods.
yesterday i found the data is not available for an info object in ods for which data is there in source system.
then I manually enter the data in the ods and today morning when i check the data in the cube it is still displaying blank but data is there in ods.
thanks in advance
sridath
Edited by: sridath on Nov 19, 2008 7:31 AM

Hi,
There could be many reason for that data not coming to the cube.
are you able to see the the data in the DSO for this object??
Are there any routine written in the cube and the records getting deleted or changed in that?
If the value of this object is getting populated through some routine??
Are you checking the values in the report or in the cube??
The value for this object may be in the after image record in the cube....so check all the records in the cube for the same value of the key fields of the DSO which has values missing.
Delete the data from the cube through a selective deletion for this record which you want to get changed and then do a full repair from the DSO for same selections.
Indexes and compression will not affect this process in any way but once request is compressed it ccannot be deleted and you will have to delete the value from the cube through seletive deletion.
Thanks
Ajeet

SharePoint 2013: A web analytics report is not available for this site.

Hello,
I have SharePoint Server 2013 and the enable usage data collection is enabled. There is usage logs and data being generated, but SharePoint says there is not data available.
A web analytics report is not available for this site. Usage processing may be disabled on this server or the usage data forthis site has
not been processed yet.
What can I do?
Thanks,
Paul
Paul

hi,
Web Analytics is now part of the 2013 Search.
You can refer the below links, :
http://blogs.msdn.com/b/chandru/archive/2013/08/31/sharepoint-2013-web-analytics-report-where-is-it.aspx
http://www.collabshow.com/2013/05/23/sharepoint-2013-analytics-a-big-step-backward/
http://usamawahabkhan.blogspot.com/2013/06/sharepoint-2013-analytics-features-how.html
if you wanna use API, there is a blog,which talk about the same:
retrieve Search Analytics Reports
using SharePoint 2013 API:
http://radutut.wordpress.com/2013/01/27/how-to-get-search-analytics-reports-programmatically-in-sharepoint-2013/

Valid size not available for this creation when using Greeting Card feature

Using PSE9 with a Mac. When attempting to create a greeting card, after selecting the photo, the Greeting Card, I receive a pop up error message as follows:
"Valid Size Not Available For This Creation". (All other Create functions such as Photo Book, Photo Calendar, and Photo Collage appear to be working). I have been in contact with Adobe Support and have been instructed to do a number of things from creating a new preferences file to uninstalling and re-installing the PSE software, with no result. Has anyone else run into this problem, and if so have found a fix? Thanks.

I've been tearing my hair out over this one also. I've been on hold for over 10 hrs with Adobe Support waited over almost 2 weeks and still no resolution. I'm trying to create the Save the Date cards for my wedding and I can't wait for Adobe. Removing the preferences file and uninstalling/reinstalling does not fix the problem.
That said I did figure out a workaround for this. It's easy but it does require Windows. For me this was no big deal as I do own a Windows box.
Get the free trial version of PE9 for Windows and install it. If you don't have a Windows computer get to a friend that has one
Upload some of your photos to the PE9 Windows Organizer (it's identical to the mac version)
Select Create and then Greeting card. Photoshop will launch the guided edit feature for greeting cards.
Select the Layout feature and once you find out that you like save it as Photoshop project. Repeat this step for as many layouts as necessary.
Copy your Photoshop project files (and any folders) to your mac.
Open the project files as you would with any other Photoshop file.
You can now select the Create feature. You will be able add your pictures and resize them, you will be able to add/remove text, you'll be able to change the backgound/borders, add graphics...pretty much anything...EXCEPT automatically modify the layout. If you click on Layout, PE9 returns nothing. You can however go into full edit mode and if you have decent Photoshop skills you can make any changes to the layout manually.
If I had to put money on this I'd say that there is a problem with the PE9 Mac installation package. For some reason it is not deploying the layout data/files or it is not putting them in the right place. For this reason the program can't find the layouts when the user selects the greeting card guided edit.
Good luck.

I upgraded to iOS x mavericks on my iMac now i cannot access my iPhoto i get this messageThis update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled.

I upgraded to iOS x mavericks on my iMac now i cannot access my iPhoto i get this messageThis update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled. I have not changed anything thankyou for any info.

Please test after each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes. Keep in mind that no one here represents Apple or can help with customer-service issues.
Step 1
A purchased app can only be updated by signing in to the App Store with the same Apple ID that was originally used to buy it. There's no way around that limitation, which also applies to free apps. If you can't sign in with the buyer's ID, delete the app and reinstall it. You'll have to pay for it again, if applicable.
Step 2
If you get the alert when trying to update a bundled iLife app, elect the Purchases page in the App Store and locate the app in your purchase history. If there's a button marked ACCEPT on the right, click it.
If you have a used Mac, the bundled apps were linked to the original owner's Apple ID and can't be transferred to you. Reportedly, customer service has issued redemption codes to some second owners who asked, but it's not guaranteed.
Step 3
If you're trying to update iLife or iWork apps that were installed from a purchased DVD, or if you have a refurbished Mac bought directly from Apple, contact App Store customer service for a redemption code. You may be asked for the part number of the DVD.
Step 4
From the App Store menu bar, select
Store ▹ View My Account
Enter your Apple ID password at the prompt. At the lower right corner of the window that opens, click the Reset button. Close the window.
See also: remove app
Keywords: refunded canceled

Today at 8am est my card was charged but when checking order status it saids expected ship date not available at this time and it also saids we received your order and it is in process . payment not taken yet

today at 8am est my card was charged but when checking order status it saids expected ship date not available at this time and it also saids we received your order and it is in process . payment not taken yet
but card was charged full amount and i havent gotten anything else been checking for update all day and got nothing i did order iphone 6 plus at 3:01am and everything went through and i was finsihed at 3:06am

chriss2633,
I know how exciting it is to have all the information on the new phone. I did send you a Direct Message. Can you please respond back to that message? Looking forward to hearing back from you.
KevinR_VZW
Follow us on Twitter @VZWSupport

ISE dashboard - CPU, memory - data not available for PSN

Similar Messages

Maybe you are looking for