ISE does not register nodes - (blank pop-up window)
Hello everyone !
There CiscoISE 1.1.4.218 (all 8 patches) consisting of 6 nodes (2 admin, 2 monitors, 2 policy) on virtual machines.
When testing failover between policy node, one of policy nodes has been removed from scheme of deployment. The result of attempting to register this node is the blank warning pop-up window, progress of registration stops without registration of policy node (screenshot in attachment). The same
thing happens when I try to register a secondary monitoring nodes (that was removed earlier, like in the case with police node). I also attach a portion of log file taken from admin node (CLI) in the moment of attempts registration of police / monitoring nodes.
In the DNS is ok (defined in both side), all certificates are valid.
Maybe somebody has already found a similar mistake ?
Sincerely,
Andrey
Please check the following Prerequisites
The fully qualified domain name (FQDN) of the standalone node that you are going to register, for example, ise1.cisco.com must be DNS-resolvable from the primary Administration ISE node. Otherwise, node registration will fail. You must enter the IP addresses and FQDNs of the ISE nodes that are part of your distributed deployment in the DNS server.
•The primary Administration ISE node and the standalone node that you are about to register as a secondary node should be running the same version of Cisco ISE.
•Node registration fails if you provide the default credentials (username: admin, password: cisco) while registering a secondary node. Before you register a standalone node, you must log into its administrative user interface and change the default password (cisco).
•You can alternatively create an administrator account on the node that is to be registered and use those credentials for registering that node. Every ISE administrator account is assigned one or more administrative roles. To register and configure a secondary node, you must have one of the following roles assigned: Super Admin, System Admin, or RBAC Admin. See Cisco ISE Admin Group Roles and Responsibilities for more information on the various administrative roles and the privileges associated with each of them.
•If you plan to register a secondary Administration ISE node for high availability, we recommend that you register the secondary Administration ISE node with the primary first before you register other Cisco ISE nodes. If Cisco ISE nodes are registered in this sequence, you do not have to restart the secondary ISE nodes after you promote the secondary Administration ISE node as your primary.
•If you plan to register multiple Policy Service ISE nodes running Session services and you require mutual failover among those nodes, you must place the Policy Service ISE nodes in a node group. You must create the node group first before you register the nodes because you need to select the node group to be used on the registration page. See "Creating, Editing, and Deleting Node Groups" section for more information.
•Ensure that the Certificate Trust List (CTL) of the primary node is populated with the appropriate Certificate Authority (CA) certificates that can be used to validate the HTTPS certificate of the standalone node (that you are going to register as the secondary node). See the "Creating Certificate Trust Lists in the Primary Cisco ISE Node" section on page 12-24 for more information.
•After registering your secondary node to the primary node, if you change the HTTPS certificate on the registered secondary node, you must obtain appropriate CA certificates that can be used to validate the secondary node's HTTPS certificate and import it to the CTL of the primary node. See "Creating Certificate Trust Lists in the Primary Cisco ISE Node" section on page 12-24 for more information.
Similar Messages
-
I am able to connect to my Mac Mini on Back to My Mac through iCloud but the keyboard/trackpad on the MBAir or MBP with which I access does not register on the Mini. So I can see the screen but cannot interact with it. Mini works accessing MBP/Air and I can use Mini to input data or interact with screens of those computers.
Regarding your first question about bookmarks, I think you discovered the answer in when you pressed the address bar. The second tab there has your bookmarks.
As for the keyboard, I'm not sure why your Firefox is reacting so slowly; mine seems to show keyboards even when I don't want them. If you have accumulated a lot of history, perhaps that's an issue?
Did you use any third party software to move your Firefox data from internal memory to the storage card? -
My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.
Clean iPhone charging port with clean dry toothbrush. See if better. If still problem clean charging port again with toothbrush and small amount of Isopropyl Alcohol.
-
Convert a webpage to PDF ,the Arabic font does not display ie,blank
When I trying to convert a webpage to PDF ,the Arabic font does not display ie,blank.how to solve this problem.
THANKS.. but a problem -my computer there no arabic script font ..how add arabic font in "language script" pls see the print screen ..ok. pls help me..
I select Roman(windows) then language script option does not contain arabic only few laguages -How to add arabic ? pls help me..
Thanks &Regards. -
Account payment does not register
at end of prepaid account payment process, my credit card payment does not register. Is there some computer setting I should be aware of? This has been happening since the beginning. I just want to pay online or easily without having to drive to a store - and can't do it.
Hello MGri,
It's important to be able to process your payments conveniently! Since you've been having this issue since your online account was set up, we need to ensure that your account is set properly for this option. Our PrePay Team is available to ensure your account is set up properly for online payments. You can reach them directly at 888-294-6830. Please let us know if you need anything further.
TanishaS1_VZW
Follow us on Twitter @VZWSupport -
IPhone is frozen. Screen does not register sliding movements.
Recently my iPhone has not been working. First it is not registering my movements, as in the sliding/pressing of my finger is not working. I tried to restart it by pressing the turn off/on button as well as the home button at the same time and now it is stuck on the sign off screen with the red slider. I cannot get it off this screen and the screen stays on. I tried hooking my iPhone up to my PC to restore it in iTunes but my PC does not register that my iPhone is connected (the icon does not appear), therefore I cannot restore it. I've tried what I can to attempt to get it to work with no avail. There's no way for me to fix the issue that I know of if the phone will not cooperate by itself or with my PC. If anyone has a solution to this problem please let me know, I may just have to go to the Apple Store if not.
Hello there, inhoc478.
The following Knowledge Base article has some great information on how to restore your iPhone from a locked state:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
Why to I FREQUENTLY have to reload my page to get hot links to work? Andmy keyboard frquently does not register key strokes, particularly the space bar.
# Right-click an empty area of the tab bar and choose Customize.
# Click the Restore Defaults button, then the Exit Customize button.
# If you don't already have it, install [https://addons.mozilla.org/firefox/addon/classicthemerestorer/ Classic Theme Restorer] and restart Firefox when prompted.
# Open the Add-ons Manager (Ctrl+Shift+A; Mac: Command+Shift+A), then the Extensions category.
# Next to Classic Theme Restorer, click the Options button.
# On the Main tab, make sure "Movable back-forward button" and "Hide urlbars stop & reload buttons" are checked. You might also want to check "Combine stop & reload buttons". Close the options window when done.
# Right-click an empty area of the tab bar and choose Customize.
# Drag the Back/Forward, Stop and Reload buttons onto the navigation toolbar.
# Click the Exit Customize button in the lower right corner when done.
That being said, I should point out that you can reload pages in other ways.
* Right-click any tab and choose Reload.
* Right-click an empty area of the page and choose Reload.
* Press F5.
* Press Ctrl+R (Mac: Command+R). -
A year ago I brought a 1 TB hard drive (My Passport), I have not used it for over 4 months and now when I use the USB cord to connect it to my mac, it does not register the hard drive. Does anyone know why this is happening?
The beeps could be caused by something as simple as a loose internal wire or connection. If it is under warranty (not sure how long that is, as WD drives range from 1 to 5 years depending on the model's series - I think "my passport" drives are 3 years) you could contact WD and ask them about it.
If it is out of warranty, you could also try opening the case and check the connections - the drive may be fine, and there have been posts on TomsHardware forums of people getting the beeps, opening up the case and the drive is fine, just some wire worked loose. -
How can I completely remove a plug-in from Aperture 2.4. Installing latest plug-in from HDR does not register with Aperture.
It is not a good idea, to manually delete registry keys. Java uninstaller removes all registry entries that are needed to perform clean future installation.
You might see some of the keys not removed by Java unistaller but they do not prevent any user from doing fresh installation of Java in future.
Java removal tool is currently being developed, but that is for removing old/unsecure and unsupported Java versions. The tool isn't really intended to remove current/above security baseline versions of Java.
Also, the tool does a standard un-install using msiexec /x. It won't specifically delete registry keys - it lets msiexec do it. -
My son's Ipod touch has lost all it's music and when he selects a app this does not register and it returns to the main screen.
It is a year old.
We tried to restore all his music on the I Tunes libary but this also did not work.
Can anyone one put us on the right track and restore his songs and save him moaning- First try resetting the iPod.
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- If still problem restore the iPod from backup via iTunes on the computer
- If still problems restore the iPod to factory defaults/new iPod since there may be some corruption that is also in the backup. -
What if the right hand side of my screen does not register touch?
what do I do if the right hand side of my screen does not register touch? I'm out of warranty also, what options do I have?
If part of the screen is not touch sensitive, and you have tried power off/on and reset, the best option is a visit to an Apple genius bar to have the techs check and see what is wrong with the screen and touch circuitry.
-
Left and right side of screen does not register mouse clicks.
The left and right side of my screen (when maximized) does not register a mouse click. I would estimate about 10 to 15 pixels in (top to bottom) before a button will register a click.
If I work with in firefox not maximized everything works fine. As it stands I have had to add buttons to the left and right side of my Firefox navigation area to utilize the back and home button. I am also not able to use my scroll bar do to this situation with out connecting an external mouse.
Operating system: Windows 7 Professional (64bit)
Resolution 1280x800
Computer: HP TouchSmart tm2 (1070us series)
This laptop does have the touchpad type mouse, I do not think this is the problem though as it will work if firefox is not maximized.
Assistance with this would be appreciated. I Love firefox but this is to much of an annoyance to deal with continually.Not sure if its ever overheated... I've never left it in a hot car if thats what you mean. Sometimes it gets very hot if I'm using EDGE for a while. I don't push hard which is why I don't think I caused it...
I will bring it in this weekend and see what they say.
I also think that the speakerphone sounds fuzzy and muffled a lot more than it did when I first bought it. So just another reason to bring it in. -
New tab does not come up blank but shows firefox unable to bring up web site in box
Pressing + on Tab bar does not come up blank, but comes up as Server not found Firefox can't find the server at www.
then various letters and symbols oki.com
How do I get rid of this to enable a blank page or nine illustrated tabs to come up, as on my other laptop?You won't see the SearchReset extension in "Tools > Add-ons > Extensions" because the code only run once and the extension automatically uninstalls itself, so this is expected behavior.
You can check for problems with preferences and rename or delete the prefs.js file and possible numbered prefs-##.js files and a possible user.js file to reset all prefs to the default values.
*http://kb.mozillazine.org/Preferences_not_saved
*http://kb.mozillazine.org/Resetting_preferences
You can try to create a new profile or reset Firefox.
*https://support.mozilla.org/kb/reset-firefox-easily-fix-most-problems
If you reset Firefox then a new profile is created and some of your data (bookmarks, history, cookies, passwords, form data) is automatically imported and your current profile will be moved to the desktop (Old Firefox Data).
You will lose extensions and other customizations (toolbars, prefs) that you've made.
It is possible to recover more data from the old profile, but be cautious to avoid carrying over the problem.
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile -
Firefox does not ask to save tabs and windows on exit
I've done everything suggested in this article:
[https://support.mozilla.com/en-US/kb/Firefox+does+not+ask+to+save+tabs+and+windows+on+exit]
Settings in "Options" are ok.
I have no extensions/themes. And the problem is still there on safe mode.
Out of the two files mentioned as possibly corrupted, I deleted formhistory.sqlite but the file sessionstore.js is not in the profile directory when Firefox is closed (as the article suggests... it is there when Firefox is open)What is the startup setting?
Tools > Options > General > Startup: "When Firefox Starts"
In Firefox 3 you do not get the 'Save & Quit' pop-up dialog if you choose Tools > Options > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time".<br />
If that option is selected then your pages will already be reopened the next time.<br />
To get that pop-up dialog you have to select one of the other choices (Show my home page,Show a blank page).<br />
You can reset the warn prefs on the about:config page via the right-click context menu.<br />
browser.tabs.warnOnClose , see http://kb.mozillazine.org/About%3Aconfig_entries
browser.warnOnQuit , see http://kb.mozillazine.org/browser.warnOnQuit
browser.warnOnRestart , see http://kb.mozillazine.org/browser.warnOnRestart
To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
If you see a warning then you can confirm that you want to access that page.<br /> -
when I tried to open document library in Windows explorer view by click 'Open with Explorer', it popped up “Your client does not support opening list with windows explorer”
OS: Windows Server 2008 Enterprise x64
IE: 9.0 32bit
webcient service is runing
HKLM\System\CurrentControlSet\services\WebClient\Parameters and changed the BasicAuthLevel to 2 instead of 1.
Anybody knows how?
Thanks.Did you add your site to trusted site list?
http://sharepoint.stackexchange.com/questions/15098/your-client-does-not-support-opening-this-list-with-windows-explorer
--Cheers
Maybe you are looking for
-
Folks - I'm new to Java and hence requesting some assitance in something I'm working on. I want to read a ascii file that constains some containment hierarchy eg., The file is listed below. <pre> # First field is parent, and fields seprated by '=' ar
-
i am trying to download the new version of itunes and quicktime etc and for me to do updates i have to enter my user name and password. i know my password is correct but i don't know about my user name. how do i find this out? i am using the new vers
-
How do I repair / rebuild my iPhoto library? I was having problem importing any picture into my original iphoto library, so I built a new library and was able to import new pictures into it. Now I'm trying to find out how to switch back to the old
-
Graduating scale and condition type pr002
hi, I am using the pricing condition pr002 in a sales order.the scales i have maintained is between 0-4 items price shd be 10000 and between 4 to 8 price is 8000.however in sales order with basic price ,discount and freight at first ths conditio
-
My MacBook won't start properly. It seems to run, but the screen won't light. I suspect the cause is a power surge due to faulty wiring in my apartment. Is this the kind of thing that can typically be repaired, and if so, at what price?