ISE Failed to Create Network Device Error

I am trying to add new network device to a new out of the box ISE 3315 appliance under the Administration > Network Resources section. I was able to do this the other day but now when I try I get an error that says "Failed to create network device. System Error!
Any ideas? I tried a reboot, and Iam pretty certain I was able to do this a few days ago. Its a lab device so only I have touch it. Only other thing I can think to add is that I am running on an eval license until my regular licenses arrive. From what I see I have 81 days left on my base and advance package eval licenses.

Is there a certain amount of AAA client for that eval license?
Thanks,
Scott Fella
Sent from my iPhone

Similar Messages

Iwl3945 failed to register network device archlinux

Hi, i just install ArchLinux on laptop dell 1420 i follow the tutorials of the official documentations.
But i hace a small problem with the wireless. My laptop have an Intel 3945 wifi card so i install teh module iwl-3945-udev, i dont add this module in rc.conf file becouse this module in now part of the kernel... but i doesnt owrk.. so i check error log and i found this:
Feb 9 21:54:24 pichirilo iwl3945: Failed to register network device (error -12)
And the rc.conf is:
# /etc/rc.conf - Main Configuration for Arch Linux
LOCALE="en_US.utf8"
HARDWARECLOCK="localtime"
USEDIRECTISA="no"
TIMEZONE="Canada/Pacific"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
MOD_AUTOLOAD="yes"
MODULES=(tg3 mac80211 snd-mixer-oss snd-pcm-oss snd-hwdep iwl3945 snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore)
USELVM="no"
HOSTNAME="pichirilo"
eth0="dhcp"
INTERFACES=(eth0,wlan0)
ROUTES=(!gateway)
DAEMONS=(syslog-ng network netfs crond alsa hal fam kdm)
i try to add the module manually but i have the same result...
any idea ???
Thanks
Last edited by dilaang (2009-02-10 05:53:43)

No luck...removed iwl3495 from rc.conf still no luck..
[root@muttai ~]# lsmod | more
Module Size Used by
i915 67208 2
drm 108768 3 i915
ndiswrapper 249600 0
joydev 14208 0
uvcvideo 62344 0
compat_ioctl32 11520 1 uvcvideo
videodev 37888 2 uvcvideo,compat_ioctl32
psmouse 57116 0
sdhci_pci 10624 0
sdhci 19588 1 sdhci_pci
btusb 15768 0
i2c_i801 12444 0
iTCO_wdt 15184 0
sg 31840 0
serio_raw 8196 0
mmc_core 54624 1 sdhci
i2c_core 26144 1 i2c_i801
iTCO_vendor_support 5636 1 iTCO_wdt
v4l1_compat 17284 2 uvcvideo,videodev
bluetooth 60836 1 btusb
video 22420 0
output 5248 1 video
intel_agp 33136 1
wmi 8896 0
dcdbas 10928 0
thermal 20896 0
processor 46648 3 thermal
fan 7304 0
button 9504 0
battery 14600 0
ac 7176 0
fuse 59584 2
evdev 13984 16
snd_seq_oss 35584 0
snd_seq_midi_event 9344 1 snd_seq_oss
snd_seq 58336 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 9364 2 snd_seq_oss,snd_seq
snd_hda_intel 531124 1
snd_hwdep 10632 1 snd_hda_intel
snd_pcm_oss 45440 0
snd_pcm 82952 2 snd_hda_intel,snd_pcm_oss
snd_timer 24720 2 snd_seq,snd_pcm
snd_page_alloc 11792 2 snd_hda_intel,snd_pcm
snd_mixer_oss 18944 1 snd_pcm_oss
snd 65096 11 snd_seq_oss,snd_seq,snd_seq_device,snd_hda_inte
l,snd_hwdep,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
soundcore 9632 1 snd
rtc_cmos 14040 0
rtc_core 21060 1 rtc_cmos
rtc_lib 4992 1 rtc_core
usbhid 41536 0
hid 49856 1 usbhid
ext3 141328 5
jbd 57000 1 ext3
mbcache 10244 1 ext3
dm_mod 62704 0
ohci1394 34612 0
ieee1394 91392 1 ohci1394
sr_mod 18884 0
iwl3945 103416 0
rfkill 13776 1 iwl3945
cdrom 39080 1 sr_mod
mac80211 182960 1 iwl3945
led_class 6280 1 iwl3945
sd_mod 29096 7
tg3 133124 0
libphy 22656 1 tg3
cfg80211 36896 2 iwl3945,mac80211
uhci_hcd 27552 0
ehci_hcd 41356 0
usbcore 160432 7 ndiswrapper,uvcvideo,btusb,usbhid,uhci_hcd,ehci_
hcd
ata_piix 27652 0
ahci 36876 6
ata_generic 8068 0
pata_acpi 7296 0
libata 176352 4 ata_piix,ahci,ata_generic,pata_acpi
scsi_mod 119256 4 sg,sr_mod,sd_mod,libata
[root@muttai ~]# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
[root@muttai ~]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:1C:23:FC:D7:1B
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:17
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:280 (280.0 b) TX bytes:280 (280.0 b)
[root@muttai ~]# modprobe -r iwl3945
[root@muttai ~]# modprobe iwl3945
[root@muttai ~]# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wmaster0 no wireless extensions.
wlan0 IEEE 802.11abg ESSID:""
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=0 dBm
Retry min limit:7 RTS thr:off Fragment thr=2352 B
Encryption key:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
[root@muttai ~]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:1C:23:FC:D7:1B
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:17
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:280 (280.0 b) TX bytes:280 (280.0 b)
[root@muttai ~]#

Failed to create Directx device

I am running Windows 7 Home Premium 64-bit on a Vaio laptop and occasionally I get "Critical Error, Failed to create Directx device" if I leave an unbfinished game of Freecell open. I always get a Devicex error when my system dose a checkup. How do I fix
this error?

Hi,
Please go the manufacturer official website to download and install the latest graphic card driver for Windows 7.
In addition, uou may refer to:
Critical error "failed to create directx device"
http://answers.microsoft.com/en-us/windows/forum/windows_other-gaming/critical-error-failed-to-create-directx-device/a2061d79-eec4-4363-bc65-83fb1b0adb12
Hope this helps.
Vincent Wang
TechNet Community Support

ISE Could not locate Network Device or AAA Client

When authenticating using 802.1x and MAB, I recieve an authentication failure with the error 11007(Could not locate Network Device or AAA Client). The root cause that ISE spits back at me is "Could not find the network device or the AAA Client while accessing NAS by IP during authentication." I did pretty much everything by the book except instead of using a loopback interface I used a vlan with a defined ip address. Could this be causing the problem?
Here is the config of the port that I'm testing on:
interface GigabitEthernet1/0/9
switchport access vlan 9
switchport mode access
switchport voice vlan 8
ip access-group ACL-ALLOW in
srr-queue bandwidth share 1 30 35 5
queue-set 2
priority-queue out
authentication event fail action next-method
authentication event server dead action reinitialize vlan 4
authentication event server dead action authorize voice
authentication host-mode multi-auth
authentication open
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
authentication violation restrict
mab
mls qos trust device cisco-phone
mls qos trust cos
dot1x pae authenticator
dot1x timeout tx-period 10
auto qos voip cisco-phone
spanning-tree portfast
service-policy input AUTOQOS-SRND4-CISCOPHONE-POLICY
end

I can ping both the vlan and the endpoint from the ISE. As far as allowing ISE to speak snmp and RADIUS to the NAD, I have enabled it on the NAD config inside the ISE. I have also double checked the snmp and radius shared passwords.
I have gotten MAB authentication to work but I am still getting the same error for dot1x authentication. Here are some of the configs on the switch.
aaa new-model
aaa authentication dot1x default group radius
aaa authentication dot1x defualt group radius
aaa authentication dot1x group group radius
aaa authorization network default group radius
aaa accounting dot1x default start-stop group radius
aaa server radius dynamic-author
aaa session-id common
ip radius source-interface TenGigabitEthernet1/0/1
radius-server attribute 6 on-for-login-auth
radius-server attribute 6 support-multiple
radius-server attribute 8 include-in-access-req
radius-server attribute 25 access-request include
radius-server dead-criteria time 5 tries 3
radius-server host 10.10.10.47 auth-port 1812 acct-port 1813 test username test key 7 097940581F5412162B464D
radius-server vsa send accounting
radius-server vsa send authentication
dot1x system-auth-control
authentication order dot1x mab
authentication priority dot1x mab
dot1x pae authenticator
dot1x timeout tx-period 10

ITunes fails to connect to store or iPod software update server despite working network, fails on multiple networks - no error message, just loads forever.

Hey everyone,
I have iTunes 10.4 and an iPod touch. I have always had trouble with synching my iPod.
Right now, iTunes will not connect to the iTunes store. When I try to synch my iPod touch, it gets stuck in "Step 2: Backing Up," and the bar loads forever. I've left it alone for several hours and it has not made any progress. When I try to restore the iPod, or update it, iTunes gives me an error message that it "Cannot connect to the iPod software update server. This has happened despite being connected to the internet, on both my school network and my home network.
I've tried messing with the hosts file in the System32/etc. folder as the website instructed on the apple website, but that did not solve the problem.
Recently, several parts of audiobooks I have have also become unplayable on my iPod, despite being able to be played on iTunes. The parts are listed but are grey and cannot be selected.
I recently copied a bunch of audiobooks via flash drive from my sister's computer to my iTunes - could this be part of the problem? They were from an Audible account that I don't share.
Thanks!
-Allison

Your iTunes stores and sync problem solution here:
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes, Sync and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Lucreate -m fails to create boot environment. error: -m not recongnized?

I'm trying to use the following command to create a boot environment on c1t1d0s0 (currently the system booted from c1t0d0s0) as you can see below the -m option is not recognized. What am a I doing wrong? Please help?
# lucreate -m /:/c1t1d0s0:ufs \ -m -:/dev/dsk/c1t1d0s1:swap -m /usr:/dev/dsk/c1t1d0s6:ufs -n solaris 10
ERROR: command line argument(s) < -m> not recognized
Usage: lucreate -n BE_name [ -A BE_description ] [ -c BE_name ]
[ -C ( boot_device | - ) ] [ -f exclude_list-file [ -f ... ] ] [ -I ]
[ -l error_log-file ] [ -M slice_list-file [ -M ... ] ]
[ -m mountPoint:devicePath:fsOptions [ -m ... ] ] [ -o out_file ]
[ -s ( - | source_BE_name ) ] [ -x exclude_dir/file [ -x ... ] ] [ -X ]
[ -y include_dir/file [ -y ... ] ] [ -Y include_list-file [ -Y ... ] ]
[ -z filter_list-file ]

conrad_user wrote:
I'm trying to use the following command to create a boot environment on c1t1d0s0 (currently the system booted from c1t0d0s0) as you can see below the -m option is not recognized. What am a I doing wrong? Please help?
# lucreate -m /:/c1t1d0s0:ufs \ -m -:/dev/dsk/c1t1d0s1:swap -m /usr:/dev/dsk/c1t1d0s6:ufs -n solaris 10
ERROR: command line argument(s) < -m> not recognized
No, it seems to be saying " -m" (so <space>-m, not -m) is what's not recognized.
In your command line, you have a backslash between ufs and the -m. That's escaping the space in front of the argument. Any reason you've put the backslash there?
Darren

Install OBIEE Failed When Creating Domain

Hi all,
I tried to install OBIEE on 64bit redhat linux, but failed when creating domain, the error log shows:
Starting the domain ...
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
An error occurred while starting the domain.
Action:
See logs for more details.
     at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3180)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3043)
     at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
     at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:49)
     at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
     at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:66)
     at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
     at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
An internal WLST operation has failed.
Action:
See logs for more details.
     at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3126)
     ... 19 more
oracle.as.provisioning.exception.ASProvisioningException
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
     at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
     at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:49)
     at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
     at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:66)
     at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
     at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     ... 14 more
the following steps(steps after creating domain) raised:
Caused by: java.net.ConnectException: t3://hostname:7001: Destination unreachable; nested exception is:
    java.net.ConnectException: Connection refused; No available router to destination
It's unlikely a hosts file issue which I've met before.
Install OBIEE Failed on Linux 64bit
the log caused by hosts file shows:
Caused by: oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
BTW, the port was tested to be available.
any idea?
thanks in advance
Nathaniel

we had this issue couple of days back ,,
Resolved by doing below
1. uninstall obiee 2. drop the repository 3, remount /tmp folder
with this we could successfully install obiee 11.1.1.7

Network Device Gotcha

I made a discovery this morning and I thought I'd share in case anyone else runs into this.
We made a network device in FCSvr called MacStore3. This was an archive device that pointed to an AFP share called MacStore3 that was on afp://macstorage.local/MacStore3. However, someone who helped us with FCSvr setup told us that when you create network devices in FCSvr, you shouldn't put the server info in the device pane. You should treat it as a locally mounted drive. So instead of putting "afp://macstorage.local/MacStore3/" in the server URL, we were instructed to put it in as a local path with the location of /Volumes/MacStore3.
It worked fine, but one day when the device became unavailable (maybe the server had to restart, or was down for a while) and I tried to archive an asset to the MacStore3 device, I happened to notice that the file didn't make it to the MacStore3 device. I scratched my head and wondered where the file could have gone. I was able to restore the asset with no problems... but where had it archived TO?
Answer - if you have a device that is a network share in actuality (afp://macstorage.local/MacStore3) and you mount that share on the FCSvr machine and assign a FCSvr location to it as a local drive (/Volumes/MacStore3), you better darn well be sure that the FCSvr machine NEVER loses the network connection. If it does, and someone tries to assign an asset to that device or archive to it, FCSvr creates a new directory in the Volumes folder of the machine and puts the new archive or asset there. Then guess what happens when your network share is mounted again... Weirdness. The OS actually assigns a new mount point for it (In my case it was "/Volumes/MacStore3-1") but since my MacStore3 device in FCSvr pointed to /Volumes/MacStore3, nothing actually made it to the network drive, it went into the DIRECTORY that was created in the Volumes folder when the actual network share was offline.
BE CAREFUL with this.

I'm not sure why they told me that. However, I can see one reason one would deliberately want a network device to be referred to in FCSvr as a local device - when you're dealing with a Contentbase. Contentbases cannot be located on servers - FCSvr will only allow you to refer to a server as a local volume through /Volumes.
Before I made this discovery, I had made four devices as contentbases because they will contain a TON of movies and photographs (They will be libraries of client photos and videos for an asset management system). The media will live on an AFP-connected NAS. I wanted them to be contentbases so my users wouldn't have to worry about duplicate filenames. So I mounted the AFP share on the FCSvr machine's desktop and assigned the device location to /Volumes/Asset Management/Client. That works, but if the Asset Management share becomes unavailable, I have FCSvr putting an Asset Management folder in the Volumes folder, and everything gets screwed up.
I remade the devices as regular filesystems, and forgot about contentbase. I guess I have to just tell my users that they are going to have to be conscious of filenames.

2.6.21.rt8 - failed to parse block device

Hi there!
I need an rt-kernel for some audio production and was told 2.6.21.rt8 should work (there are, apparently, a lot of problems with the newer ones). I picked up the package from one of the repos for Arch ProAudio http://arch.madfire.net/proaudio/i686/ and installed it without any problems.
However, upon booting I run into the "failed to parse block device"-error. I realize quite a few people have had this error for one reason or the other. I have, of course, tried a lot of the solutions mentioned in the forum already but as I'm quite new to this I'm not quite sure of what might be causing the problem. My kernel for everyday-work is 2.6.28-ARCH which works perfectly but has too low a system timer resolution etc. for audio production.
Please let me know what conf's to post.
Any help would be greatly appreciated.
Cheers!

Note: Probably better to open up a new topic on this Ineluki and describe the details as best as you can.
http://wiki.archlinux.org/index.php/For … Bumping.27

Blu-ray error device error code "3" create sequence fail to write m25 file

Continue to get this error message when outputting to blu-ray, can burn to dvd just fine. It seems I have experienced this issue in the past but don't recall how I resolved.
tried re-saving to new file name.

I found 3 other discussions... one of them may help
Re: Blue ray Error - "Device not ready", Code:"3", Notes - Any ideas what this means?
Blu-ray error: "device error", Code "3", Note: "AS_StorageError = -97064
Blu-ray Error: "divide error", Code: "3", Note: "AS_StorageError = -97060

Multiple Network Device Groups when importing to ISE using template

I have a question about importing a group of network devices into ISE using the template provided. The template only has a single column for Network Device Groups - is there a way to import devices and include more than one NDG? For instance, the NDG's we use are "Device Type" and "Location". I'd like to include both when doing my import and I've tried multiple ways to seperate the two strings within the column (comma's colons, semi-colons, spaces, pipes, tabs, etc), but i always get an error message that "NDG group does not exist". I also tried adding a new column into the template, but that just plain failed to import.
If there is any way to do this, I would appreciate any advice on how - I have to add about 40 devices per week to our ISE deployment and I'd rather not have to go in and add any parameters manually if it can be helped. Thanks very much!
Ross
BTW, we are running ISE ver 1.1.2 in case it is relevant.

Yes, you can do it. You have to use the pipe "|" to separate the groups. But please notice you must create the network device groups in advance.
For example, I have the following groups in my csv file to import a lot of network devices
Device Type#All Device Types#SWITCHES#375O-X|Location#All Locations#PERU#LIMA
But as a pre-requisite I have to create the network device groups.
If you have lots of network device groups, you can mass import them instead of creating them one by one.
Please rate if it helps

How to import network devices on ISE 1.2

Hi, experts,
I'm trying to import network devices on ISE 1.2.0.899
so I downloaded the template and opened with notepad and wrote all the nessesarry information.
and I tried to upload to ISE, and it just said import failed. no reason..
does anyone know how to do it ?

Hi jiyoung
This import failed error might occur due to following reasons so please make sure that :
You are not running two import jobs of the same resource type at the same time. For example, you cannot concurrently run two import jobs to import network devices from two different import files.
More over please make sure that while configuring the network devices you are performing job from a super admin or network device admin group.
Best Regards:
Muhammad Munir
Hi, experts,
I'm trying to import network devices on ISE 1.2.0.899
so I downloaded the template and opened with notepad and wrote all the nessesarry information.
and I tried to upload to ISE, and it just said import failed. no reason..
does anyone know how to do it ?

Error -32810 occurred at The FieldPoint server initialization failed. Possible causes: 1. Missing or corrupt configuration file; 2. Failed to create callbacks. : FP Open.vi

I have two cFP-2120 RT controller. They both have NI-Serial RT2.5.6, DataSocket for LV RT4.2, NI-VISA 3.6, FP Drivers 5.1.0, FP VI Manager 3.1.0 LV RT 7.1.1 installed. But one same vi can run on one controller but not another.
the error message got when it runs on another controller is "Error -32810 occurred at The FieldPoint server initialization failed. Possible causes: 1. Missing or corrupt configuration file; 2. Failed to create callbacks. : FP Open.vi"
I wonder by what it is caused?
Thanks

Hi Matthew,
As mentioned previously, this KnowledgeBase article may be of some help. Also, if your code is being run on an embedded controller and then a network controller (not embedded), you will need to run the program differently. On the embedded controller, you should deploy your VI in a Project Explorer or programmatically (as described here.) However, you do not need to deploy the program to a network controller, but simply run the VI.
I would also suggest creating a new .IAK file. Do you still see the same error? Also, double-check that the software installed on the controller matches the software installed on the host PC. If you have any file paths associated with one FieldPoint controller, ensure that you are changing them to match the second controller.
Please keep us posted on your troubleshooting steps. Have a great day!
Amanda Howard
Americas Services and Support Recruiting Manager
National Instruments

Windows Server 2012 Windows Backup failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).

The Volume Shadow Copy service initially was running under the context of System, so we thought that ‘System’ doesn’t have permissions to access network shares.
When the Volume Shadow Copy service was running under the context of System, this was the error logged:
“failed with following error code '0x8078014B' (There was a failure in creating a directory on the backup storage location.).”
Which is likely due to not having permissions to write to the network location.
This is a scheduled backup trying to write to a network location, so we changes the service to run under the context of an account that does have permissions to write to the network share.
  Then the error changed to this:
“failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).”
HRESULT 0x8078006b
DetailedHRESULT 0x8004230f
ErrorMessage %%2155348075
BackupState 12
VolumesInfo <VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0"
BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0"
TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228"
DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0"
FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0"
/></VolumeInfo>
We aren’t really seeing anything that gives any hint on what the issue is.
Any ideas? Thanks in advance!

We are trying to back up folders/files from 2 local drives (C: & D:), both of which have only 10% space used, and 100 GB free.
We are attempting to back the files up to a Remote Shared File (and there is 100+ GB free space out there).
  If we try another network location, we receive the exact same error.
This is Windows Server 2012, not running Hyper-V and is a physical server not a VM.
Thank you for the link.
Looking in:
Event Viewer / Application and Service Logs / Microsoft / Windows / Backup / Operational
But it doesn’t seem to give any more details:
Log Name:
Microsoft-Windows-Backup
Source:
Microsoft-Windows-Backup
Date:
7/8/2013 8:00:12 PM
Event ID:
5
Task Category: None
Level:
Error
Keywords:
User:
SYSTEM
Computer:
servername.edu
Description:
The backup operation that started at '‎2013‎-‎07‎-‎09T02:00:06.273000000Z' has failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).
Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}" />
<EventID>5</EventID>
<Version>3</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2013-07-09T02:00:12.872602100Z" />
<EventRecordID>30</EventRecordID>
<Correlation />
<Execution ProcessID="3028" ThreadID="3996" />
<Channel>Microsoft-Windows-Backup</Channel>
<Computer>servername.edu</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BackupTemplateID">{A421E864-A115-4288-8D12-F4878CF8A248}</Data>
<Data Name="HRESULT">0x8078006b</Data>
<Data Name="DetailedHRESULT">0x8004230f</Data>
<Data Name="ErrorMessage">%%2155348075</Data>
<Data Name="BackupState">12</Data>
<Data Name="BackupTime">2013-07-09T02:00:06.273000000Z</Data>
<Data Name="BackupTarget">\\servername\BACKUP</Data>
<Data Name="NumOfVolumes">2</Data>
<Data Name="VolumesInfo"><VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0"
IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem
Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0"
NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /></VolumeInfo></Data>
<Data Name="SourceSnapStartTime">2013-07-09T02:00:06.289250300Z</Data>
<Data Name="SourceSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="PrepareBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PrepareBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="TargetSnapStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="TargetSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="DVDFormatStartTime"><TimesList></TimesList></Data>
<Data Name="DVDFormatEndTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyStartTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyEndTime"><TimesList></TimesList></Data>
<Data Name="BackupPreviousState">2</Data>
<Data Name="ComponentStatus"><ComponentStatus></ComponentStatus></Data>
<Data Name="ComponentInfo"><ComponentInfo></ComponentInfo></Data>
<Data Name="SSBEnumerateStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBEnumerateEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SystemStateBackup"><SystemState IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="BMR"><BMR IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="VssFullBackup">false</Data>
<Data Name="UserInputBMR">false</Data>
<Data Name="UserInputSSB">false</Data>
<Data Name="BackupSuccessLogPath">
</Data>
<Data Name="BackupFailureLogPath">
</Data>
<Data Name="EnumerateBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="EnumerateBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupFlags">0x9</Data>
<Data Name="ComponentInfoSummary"><ComponentInfoSummary ComponentInfoArrayPresent="1" TotalComponents="0" SucceededComponents="0" /></Data>
</EventData>
</Event>

Network Device Usermode I/O Protocol and ConfigFree error

I have a Toshiba laptop and recently it has not started properly, displaying the following message: "Not found TOSHIBA Network Device Usermode I/O Protocol. Please reinstall ConfigFree. OK".
I am unable to use the laptop and it will not shut down without being forced (though once it did shut down and restarted OK, and then worked fine for three days We left it over Xmas and now it is doing it again). Can anyone let me know what this error message means and how I can deal with it (I know little about the workings of my laptop!).
We have Windows XP and are set up to a wireless broadband connection. I would be wonderfully happy if I could sort this as I have been forced to travel to work rather than work from home today because of it!!!!
Thank you in advance!

Hi
The message is clear.
> Please reinstall ConfigFree.
So why didnt you reinstall this utility???
If you didnt create the Tools & Utility CD you can download this utility from the Toshiba driver page.
Then remove the ConfigFree from the Add & remove programs, reboot the unit and install the ConfigFree again.

ISE Failed to Create Network Device Error

Similar Messages

Maybe you are looking for