ISE Guestportal login action resource not found
I'm setting a new ISE for guest webauth. I'm getting indicated message when I try to login as a Guest.
I'm missing something?
Regards.
Adding additional info:
I'm running ISE 1.1.1.246
The error apeears before the login screeen. I got a certificate warning, and when I do continue I got the error
Error: Resource not found
Resource: /guestportal/Login.Action
Similar Messages
-
ISE Guest Portal - Error Resource not found
Hello,
When I create a guest user through the sponsor portal, then try to login with this guest user through the Guest Portal, after I press login button, the following error message occurs and do not know what to do to solve.
Error: Resource not found.
Resource: /guestportal/
None of the messages on the forum about it helped me to solve the problem.
I am using ISE 1.1.3.124 and this is a new re-image appliance.
Can anyone help?Hello,
As you are not able to get the guest portal, then you need to assure the following things:-
1) Ensure that the two Cisco av-pairs that are configured on the authorization profile should exactly match the example below. (Note: Do not replace the "IP" with the actual Cisco ISE IP address.)
–url-redirect=https://ip:8443/guestportal/gateway?...lue&action=cpp
–url-redirect-acl=ACL-WEBAUTH-REDIRECT (ensure that this ACL is also defined on the access switch)
2) Ensure that the URL redirection portion of the ACL have been applied to the session by entering the show epm session ip command on the switch. (Where the session IP is the IP address that is passed to the client machine by the DHCP server.)
Admission feature : DOT1X
AAA Policies : #ACSACL#-IP-Limitedaccess-4cb2976e
URL Redirect ACL : ACL-WEBAUTH-REDIRECT
URL Redirect :
https://node250.cisco.com:8443/guestportal/gateway?sessionId=0A000A72
0000A45A2444BFC2&action=cpp
3) Ensure that the preposture assessment DACL that is enforced from the Cisco ISE authorization profile contains the following command lines:
remark Allow DHCP
permit udp any eq bootpc any eq bootps
remark Allow DNS
permit udp any any eq domain
remark ping
permit icmp any any
permit tcp any host 80.0.80.2 eq 443 --> This is for URL redirect
permit tcp any host 80.0.80.2 eq www --> Provides access to internet
permit tcp any host 80.0.80.2 eq 8443 --> This is for guest portal
port
permit tcp any host 80.0.80.2 eq 8905 --> This is for posture
communication between NAC agent and ISE (Swiss ports)
permit udp any host 80.0.80.2 eq 8905 --> This is for posture
communication between NAC agent and ISE (Swiss ports)
permit udp any host 80.0.80.2 eq 8906 --> This is for posture
communication between NAC agent and ISE (Swiss ports)
deny ip any any
Note:- Ensure that the above URL Redirect has the proper Cisco ISE FQDN.
4) Ensure that the ACL with the name "ACL-WEBAUTH_REDIRECT" exists on the switch as follows:
ip access-list extended ACL-WEBAUTH-REDIRECT
deny ip any host 80.0.80.2
permit ip any any
5) Ensure that the http and https servers are running on the switch:
ip http server
ip http secure-server
6) Ensure that, if the client machine employs any kind of personal firewall, it is disabled.
7) Ensure that the client machine browser is not configured to use any proxies.
8) Verify connectivity between the client machine and the Cisco ISE IP address.
9) If Cisco ISE is deployed in a distributed environment, make sure that the client machines are aware of the Policy Service ISE node FQDN.
10) Ensure that the Cisco ISE FQDN is resolved and reachable from the client machine.
11) Or you need to do re-image again. -
404 Resource Not Found In UWL for Display Request in Travel Management
Hi Team,
Issue regarding Uwl in Travel Management.In Mss inbox when approver clicks on display form for travel request its throwing error like 404 resource not found.
i have check all uwl iview properties like list actions to be excluded and Xml code etc.
Regards,
Venkat.Hi Venkat
I hope you are well and many thanks for using the discussion forums .
In relation to the scenario that you have described you mentioned that:
Once a user (via the MSS Inbox) clicks on the display form for travel request you are encountering a 404 resource not found error.
Ok so the first means of analysis is to ensure the UWL Destination Service Configuration is setup and maintained accordingly. Kindly review and consult the documentation below carefully.
SAP Note: 1133821 - UWL Destination Service configuration
After ensuring the destination(s) are setup accordingly and if the issue persists kindly restart the UWL service and clear the UWL cache to see if that resolves the issue.
In the destination configuration kindly ensure there are no discrepancies or misconfigurations.
Now have you navigated to your current connector setup and viewed the status columns to see if there are any exceptions appearing?
Lastly kindly check if the URL being called (at the request page) is correct.
Kindly update me as per your findings.
Kind Regards & All The Best
Troy Cronin - Enterprise Portal Support Engineer -
i have installed cisco acs server 5.3 and applied an eval license. when i am going to define an authorization rule in access policy, i can find and predefined rules and i can not create any rule of my own. if i do any thing i get this error message.
ACS: Resource not found or internal server error
ErrorCode: 500 has occured. Click here to get back to the server
can any one please help me on this.Anyone know of what could be causing this problem, when using a supported browser?
We are running ACS version 5.3.0.40.9 (appliance).
We are using IE 8. When using ACS, everything works fine for a period of time, and then at (seemingly) random times, we will suddenly get the "ACS: Resource not found or internal server error". The only way to get working again is to log out of ACS and log back in.
Also, we seem to get logged out at random times, even while active and in the middle of updating something. Sometimes we receive the message that our session has timed out and other times we are simply dropped back to the login screen, with no error or timeout message. Either way, it happens while we are definitely active and working...not a logout due to inactivity.
This is all with IE8. Any ideas?
TIA -
Hi,
I am fairly new to the LV Project method of building executable files and embeded applications.
I have been using LV 7.2 for the last few years and finally switched over to 8.2 this last summer.
My problem is that I have an embedded application that I need to troubleshoot, but every time I try and run it from my desktop, it hits me with one of these messages:
Deploying MPPT-Testbed (successfully deployed target settings)
Deploying ErrorConvert.vi (already deployed)
Deploying FP Close(IO).vi
Failed to download FP Close(IO).vi
LabVIEW: Resource not found.
LabVIEW: Resource not found.
The FP Close(IO).vi is the latest issue, I have had other files that have failed to load as well. I have attempted to make a common folder for all of my shared VIs, I have 6 FP-2000 controllers.
Any ideas?
I run LV 8.2 w/RT on my desktop, my FP-2000 is running LV 8.2, FP Drivers 5.2.0 and FP VI Manager 4.1.0
-BillHi Bill,
Since you produced code in a previous version of LabVIEW, and therefore previous FieldPoint driver version, you will need to revamp your code a little to be able to use it in LV 8.2 with FieldPoint 5.0. I'm assuming that the FP Close.vi is not available in the palette that is not available in LabVIEW 8.2. This is expected, as FieldPoint 5.0 utilizes different VIs than previous versions. Accordingly, you do not need to use the FP Open or FP Close VIs, as they are not available in this driver version. However, you only need to use a Browse I/O Point and either a FP Read, FP Write or FP Read/Write. Generally, a quick modification of your code will take care of this problem. Let us know if you need help with this; a screenshot of your code might be helpful. Thanks!
Amanda Howard
Americas Services and Support Recruiting Manager
National Instruments -
Error Message: Resource Not Found, Unable to Load SyncUICoreLocalized.dll
I'm having trouble syncing my iPhone 4. I get an error message that says: Resource Not Found, Unable to load SyncUICoreLocalized.dll. This is preventing me from transferring my information from my old phone to my new iPhone 5c. Can anyone help me??? A simple restart of the computer did not solve the problem.
Thanks :-)I found a thread of people having the same problem, and a suggestion by stanalet solved my problem! Thanks stanalet!
-
While running servlets getting errors 404 or 505 resource not found
Hi all,
I'm novice to J2EE.
I've encountered a problem while accessing the deployed module in weblogic 8.1 server.
I'm sure that the webapplication module is deployed as i saw my module in administration console & also the status said that it is deployed.
when i access my web application by specifying the proper server and port no and context root it is showing
either 505 - resource not found error(http://localhost:7001/Suresh-2/Suresh) or 404 - not found error.( http://localhost:7001/Suresh-2/Suresh)
Now let me elaborate what i've done till now.
My webapplication folder structure is : C:\bea\user_projects\domains\mydomain\applications\Suresh\WEB-INF\classes\Sai\ServExamp.class
My servlet is ServExamp.java
I created a folder called "Suresh". In that folder created another folder called "WEB-INF". In WEB-INF created a folder called "Classes".
Since my servlet is in package "Sai", the .class file reside in \Suresh\WEB-INF\Classes\Sai\ServExamp.class
The source code is :
package Sai;
import javax.servlet.;*
import javax.servlet.http.;*
import java.io.;*
public class ServExamp extends HttpServlet
public void doPost(HttpServletRequest req,HttpServletResponse res)throws IOException
PrintWriter out=res.getWriter();
java.util.Date today=new java.util.Date();
out.println("<html>"+"<body>"+
*"<h1 align=center>HF\'s Chapter1 Servlet </h1>"*
+"<br>"+today+"</body>"+"</html>");
Now i'm almost done creating a web application. Next, I constructed a simple web.xml descriptor that gives a web friendly name for my servlet, and points to the servlet. I constructed web.xml descriptor file in the WEB-INF folder (C:\bea\user_projects\domains\mydomain\applications\Suresh\WEB-INF\).
The web.xml file source is :
*<!DOCTYPE web-app*
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
*"http://java.sun.com/dtd/web-app_2_3.dtd">*
*<web-app>*
*<display-name>Hello World Web Application</display-name>*
*<description>Test Servlet</description>*
*<servlet>*
*<servlet-name>ServExamp</servlet-name>*
*<servlet-class>Sai.ServExamp</servlet-class>*
*</servlet>*
*<servlet-mapping>*
*<servlet-name>ServExamp</servlet-name>*
*<url-pattern>/Suresh</url-pattern>*
*</servlet-mapping>*
*</web-app>*
Now I have told Weblogic that the URI /Suresh corresponds to my servlet "Sai.ServExamp".
My Web Application is ready to be deployed at this point. I logged onto Weblogic's admin console,
*1) clicked on deployments, then navigated to "Web Application Modules" .*
*2) Clicked "Deploy new Web Application Module"*
*3) Navigated to the location of your web application folder (Suresh). There was a radio button next to it indicating that I can select that folder as a valid web application.*
*4) I Clicked that radio button and clicked "Target Module".*
*5) It informed that my web application "Suresh" will be deployed to myServer.It asked a name for my web application deployment. By default it was "Suresh"*
I clicked Deploy.
*6) After deployment, my web application "Suresh" appeared in the "Web Application Modules" tree on the left.*
I Clicked on "Suresh"( my web application) then clicked the testing tab, then clicked the link shown there(http://localhost:7001/Suresh-2).
It was not showing my servlet (showed a 403 error)
Error - 403
This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable.
I think so it came b'coz I don't have an index.html or index.jsp page.
*7)Instead,I added my servlet on to the URL it provided.*
http://localhost:7001/Suresh-2/Suresh
It is showing these error code: Http: 505 resource not allowed
The page cannot be displayed
The page you are looking for cannot be displayed because the address is incorrect.
Please try the following:
If you typed the page address in the Address bar, check that it is entered correctly.
Open the localhost:7001 home page and then look for links to the information you want.
Click Search to look for information on the Internet.
when i just type : http://localhost:7001/ -> Error 404 not found error
it's showing
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
*10.4.5 404 Not Found*
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
I want to run my web application & any help would be appreciated.
Thanks in advance.
with regards,
S.SayeeNarayanan.
Note: I even deployed my war file, which i got by execution of (jar cv0f webapp.war . ) command from the root directory of my web application i.e. Suresh
Then executed my webapplication it is showing
error-505 resource not allowed.
--------------------------------------------------------------------------------------------nammathamizhan wrote:
Hi all,
I'm novice to J2EE.
You're also a novice to this forum.
First, turn off the bold font.
Second, post your question once and only once to a single forum. You only waited an hour before reposting your question. That's not the way this works. Asking your question multiple times will not increase the likelihood that you''ll get an answer. As a matter of fact, you're guaranteed nothing at all. Give it your best effort and hope for success. This isn't a paid consultancy - we're volunteers.
I've encountered a problem while accessing the deployed module in weblogic 8.1 server.
I'm sure that the webapplication module is deployed as i saw my module in administration console & also the status said that it is deployed.
when i access my web application by specifying the proper server and port no and context root it is showing
either 505 - resource not found error(http://localhost:7001/Suresh-2/Suresh) or 404 - not found error.( http://localhost:7001/Suresh-2/Suresh)
If you're correct, and it's deployed, that would suggest that the URL you gave is incorrect.
>
Now let me elaborate what i've done till now.Good info - almost too much.
% -
BI IP - Upload flat file - "requested resource not found" when typing URL
Hi,
we tried to implement the "upload flat file" functionality (blog Marc Bernard). We followed the different steps and included the bug fixes as well. When we want to launch the URL in an internet explorer session we get message "requested resource not found".
Hereby the URL used:
http://sapscmbid.vpkgrp.int:50100/sap/bc/webdynpro/sap/zrsplf_file_upload?sap-language=EN&planning_sequence=FILE_SEQ&show_messages=WEXA
Do you know what we did wrong? We would like to finish this by the end of this week ...
kind regards
DHi,
when we use URL http://sapscmbid.vpkgrp.int:50100/ we see the screens of the portal so I presume this server and port is accurate (we use the same link for the planning modeler and this works fine).
The SICF service zrsplf_file_upload has been imported and has status active. Should we check other things as well?
D -
Can't Download from iTunes Store - "Requested Resource Not Found" Error
I am trying to download a couple of (free) apps for my iPhone and iTunes is throwing up an error saying "The requested resource was not found. There was an error in the iTunes Store. Please try again later." Is anyone else having this issue at the moment? Is the store down?
It has been a few hours now. Same problem. "Resource Not Found" error when trying to download apps from the iTunes store. Anyone else having this problem? Anyone NOT having this problem? Anyone?
-
Need some help, I was downloading an album when the message "could not complete itunes store request, requested resource not found." "Error in the itunes store please try again later." My account has been deducted for the amount of the album, but I dont have it downloaded on my computer. Please help!!! Thank you!!!
Does the purchases show in your Purchased list?
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"? Ones with a green checkmark are solved.
Next contact iTunes by:
Contact iTunes -
Error: Resource not found in FilterOptionCollection. Please help
Hi Experts,
I'm currently implementing Approve Requests at a customer.
I've got the service TASKPROCESSING pointing to ERP_WF. I can see the catalog SAP_FND_TC_TX1 and I've created a tile, pointing to my scenario as defined in the netweaver gateway.
When I go to launchpad the reference error message is displayed.
Details on the word file.
Error Resource not found Filter Option Collection - Approve Requests.docx - Google Drive
Thanks in advance!Thank you Andre,
We finally solved it. I post the correction for future reference.
The problem was solved by changing the configuration on the assignment of the data provider to the data model.
ZTM_TGW_SVC_MODEL_0001_BE software version was DEFAULT, when it should've been /IWPGW/BWF.
The route in SPRO is: SAP Netweaver->Gateway>OData Channel>Administration>General Settings> Assign Data Provider to Data Model. -
Resource not found or internal server error when trying to edit location
Hi all,
ACS is appliance and version 5.2.0.26.7
The problem is after creating location under all locations.
When trying to click on the location name to edit location profile, there is an error page that shows
"ACS:Resource not found or internal server error"
But if click on the radio button and press the edit button at the bottom of page.
There is no problem.
Any on has the same problem?
Detail step and screen capture in attached file.I can't find any CDETS that exactly match what you describe but up to patch 10 of 5.2 the follwoing CDETS related to NDGs are included:
CSCtx83260
NDG locations not showing up on GUI
CSCtu02752
ACS 5.2 patch 8 cannot display long lists of NDGs
CSCtu04594
ACS 5.2.0.26.7 - only 50 NDGs shown on GUI with more than 100 configured -
I am trying to build an executable and I keep getting and error and cannot seem to figure out what is wring. The whole error is "LabVIEW: resource not found. An error occured loading "interface 3.vi" Labview load error code 24: this vi cannot be loaded because it is broken and has no block diagram."
I am using LV 8.20 and DSC 8.2. I am trying to create an executable that has the web server running for using remote panels, i have netowrk published shared variables, connecting to a fieldpoint unit, and I am using the NI system tray icon vis to load the program to the system tray.
I have my shared variable library added as a support file, as well as the lvdsc.ini, and the tray icon files. I have sleected "Enable Enhacned DSC run time support" in the app builder, did not remove any type def,etc.
I cannot get the .exe to run on my development machine or another machine, I get the same error. I tried creating an installer that installed the 8.2 runtime, dsc,fieldpoint, variable engine and manager and MAX.
I could not find anything in the help files on the dsc, maybe someone else has some hints. thanks
KennyHi Kenny,
I hope you are doing well today! What is interface 3.vi? Is it possible for you to post your project over here? Also, I would recommend creating a simple DSC application; and would like you to build it. Do you still get errors?
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies -
Outlook for mac, message HTTP error resource not found 18596
outlook for mac, message HTTP error resource not found 18596 really strange and outlook is connected and as soon as you send a mail you suddenly get the message, really annoying actually, seems to be an old problem!!!
Help appreciated!!!!!!!!Same probelm any suggestions ????
-
Error message stating "Network resources not found"
I distributed a form and now I am receiving a message stating "Network Resources Not Found". What can I do? Nothing has been changed since the form was distributed and the "help person" was no help when talking to them.
The forms are saved on my personal computer and they have not been moved since they were created. The form was given an open access so that anyone could access and complete/submit the form. It had been working perfectly until Tuesday when the error message started to appear.
Maybe you are looking for
-
Hi, Currently we are implementing crm & adobe interactive form integration scenario. What we are expecting; when user presses submit via e-mail button on the form, the xml file which is attached to e-mail has to be processed by CRM. We have read pre
-
Is there anyway to connect a 6th generation ipod to a video player designed for a 5th generaton ipod? be it a software update or anything else? Thanks Mike
-
Hello BPS-enthousiasts, We have a problem concerning our input screens. We have recently started a BPS-project on a 7.0-system and ran into - what we think - is a bug. These input screens have fiscal year, posting period and currency as data columns.
-
Adding new constant value to an 'enum' used in a field causes an exception
We are using the DPL. I added a new constant to an enum that is used as a field on an entity called Booking (this field is not a key). This seems to cause an exception during onForeignKeyDelete when we delete an object from a related entity. The cons
-
Additional correspondence types
I had copied the function module FI_OPT_ARCHIVE_CORRESPONDENCE to a custom function module and that is placed in the BTE and this function module has contains the correspondence types SAP01 (payment notificiation) and SAP08 (account statement) and i