ISE installation - reimaging issue

Hi,
Today I was installing ISE on 3355 appliances those will run all services (standalone), when installation completed I was not able to login to the CLI. I think the keyboard I used had issue (typed extra charachter or something). This was a pre-loaded OS.
I downloaded (ise-ipep-1.2.0-899.i386.iso) and tried password recovery booting appliance with (ise-ipep-1.2.0-899.i386.iso), after changing the password I saved configs and tried logging using the new password. But I could not login again.
Then I tried to re-install ISE using (ise-ipep-1.2.0-899.i386.iso). After the installation was completed, I entered setup command and an error poped up on the screen. "input/output errors occured while installation".
Question 1: Is the following iso only for a posture node installation or I could use this for ISE standalone deployment?
ise-ipep-1.2.0-899.i386.iso
Cisco Identity Services Engine Software Version 1.2.0 full installation (IPN functionality only). This ISO file can be used for installing ISE IPN (Inline Posture Node) on ISE-33x5 and NAC-33x5 Appliances, SNS-3415 server and CSACS-1121.
Question:2 What could have caused "input/output errors occured while installation". And how should I proceed with the installation?
I am in really bad situation, your help and support will be highly appreciated.
Regards

Hi Ravi, Thanks for the reply but my questions were following..
Question 1: Is the following iso only for a posture node installation or I could use this for ISE standalone deployment?
Can I use this ise-ipep-1.2.0-899.i386.iso for fresh installation on 3355 appliance?
Question:2 What could have caused "input/output errors occured while installation". And how should I proceed with the installation?
Answer: Download the latest version 1.2 and check the MD5 checksum.

Similar Messages

Performing "offline" compliance module update to new ISE installation

Hi everybody,
I am just wondering if anyone knows how perform compliance module on a new ISE installation to get the AV and AS updates, while the ISE is "offline", (not connected to Cisco/Internet).
The ISE has Advance Service license, but the customer's security poilcy prohibits connecting any device on their IntraNet to the internet, and if there is any updates to get from the Internet, then it has to be received on the internet network and manually transport it to the IntraNet.
Appreciate your input.
Mike

To upload offline posture updates, complete the following steps:
Step 1 Go to https://www.cisco.com/web/secure/pmbu/posture-offline.html .
Save the posture-offline.zip file to your local system. This file is used to update the operating system information, checks, rules, and antivirus and antispyware support charts for Windows and Macintosh operating systems.
Step 2 Access the Cisco ISE administrator user interface and choose Administration > System > Settings > Posture .
Step 3 Click the arrow to view the settings for posture.
Step 4 Choose Updates . The Posture Updates page appears.
Step 5 From the Posture Updates page, choose the Offline option.
Step 6 From the File to update field, click Browse to locate the single archive file (posture-offline.zip) from the local folder on your system.
Note The File to update field is a required field. You can only select a single archive file (.zip) that contains the appropriate files. Archive files other than .zip (like .tar, and .gz) are not allowed.
Step 7 Click the Update Now button.
Once updated, the Posture Updates page displays the current Cisco updates version information under Update Information.

How to migrate a two node ISE installation to a six node ISE installation

How do we migrate from a two node ISE installation where the primary ISE has IP address A and the
secondary has IP address B to a six node ISE distributed installation with one primary admin ISE,
one secondary admin ISE, one primary monitoring ISE, one secondary monitoring ISE and
one PSN ISE with IP address A and finaly one PSN ISE with IP address B?
It is a production environment so we want to do the transition with minimal service impact.

I would assume your current setup is
Node 1 - Primary Admin, Secondary Monitor, PSN
Node 2 - Secondary Admin, Primary Monitor, PSN
Here is a high-level overview of what I think should be done. Keep in mind that it is only my opinion and ultimately I would recommend working with TAC to validate the process to ensure there is minimal impact.
TAKE A BACKUP of Configuration and Operational data.
Install the additional 4 nodes.
Register one as the secondary monitor. This should remove the secondary monitoring role from the other node.
Register another node as the primary monitor. This should remove the primary monitoring role from the other node.
Register the last two nodes as administration nodes in the same process, doing the secondary admin node first, then finally the primary admin node. This should leave the remaining PSN personas installed as the only persona on the original admin nodes.

I am having an installation failure issue with my itunes 11 software. File is corrupted and i don't know what to do. I've un-install and re-installed the software three times and continue to get the same error message. It states that "This copy of ITun

I am having an installation failure issue with my itunes 11 software. File is corrupted and i don't know what to do. I've un-install and re-installed the software three times and continue to get the same error message. It states that "This copy of ITunes is corrupted or is not installed correctly. Please reinstall Itunes"
iMac, iOS 6

HI,
If your old version of iTunes is still working - then I sugest you stick with that.
iTunes 11 is a lousy update - It will not retain your playlists, you can't find and delete duplicates... and a whole arry of oyher issues. (have a look around this forum to see how many issues IT11 gives people)
Just a friendly advise and warning :-)

AW: [Acrobat Installation & Update Issues] AW: [Acrobat Installation & Update Issues] Update von Acrobat 8.0 auf 8.3

hello
I say again that I have acquired the Acrobat 8.0 version honestly. I ordered this version even if a handler is Germany. This handler was registered on the website at Adobe as a handler. If you do not believe me, I'm looking for stuff from my archive. But this time I would like to have then paid by you. Again, it is known that the version 8 Without the update 8.3, constantly has errors. I used to simply confirmed the update button. Today there is no longer this site. You are obliged to provide me with the update. Or give me a free replacement to the next higher version. Please give me a link to a zip file that contains a setup file.
Best Regards
Werner
Hallo
Ich sage nochmals, dass ich die Acrobat 8.0 Version ehrlich erworben habe. Ich habe diese Version auch bei einem Handler ist Deutschland bestellt. Dieser Handler war auch auf der Webseite bei Adobe als Handler registriert. Wenn Sie mir nicht glauben, werde ich die Sachen aus meinem Archiv suchen. Diese Zeit möchte ich aber dann von Ihnen bezahlt haben. Nochmals, es ist bekannt, das die Version 8. Ohne das Update 8.3, ständig Fehler hat. Ich habe früher einfach das Update Button bestätigt. Heute gibt es diese Seite nicht mehr. Sie sind dazu verpflichtet, mir das Update zu liefern. Oder liefern Sie mir kostenlosen Ersatz auf die nächste Höhere Version. Bitte, Sie mir einen Link mit einer Zip-Datei, die eine Setup Datei beinhaltet.
Best Regards
Werner
Mobil: +41 (0) 79 559 83 21
Skype:<skype:werner6331?call> Werner Göbel<skype:werner6331?call> (werner6331)
Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Der Inhalt dieser E-Mail ist ausschließlich für den bezeichneten Adressaten bestimmt. Bitte beachten Sie in diesem Fall, dass jede Form der Kenntnisnahme, Veröffentlichung, Vervielfältigung oder Weitergabe des Inhalts dieser E-Mail UNZULÄSSIG ist. Wenn Sie nicht der richtige Adressat bzw. sein Vertreter sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Vielen Dank. Der Versender übernimmt keine Haftung für die Richtigkeit oder Vollständigkeit der Meldung. Eventuell entstandene Schäden die aus den Inhalten dieser Meldung resultieren werden vom Versender nicht übernommen.
This e-mail may contain confidential and/or privileged information. Access to this e-mail by anyone else is unauthorized. If you are not the intended recipient (or have received this e-mail in error), any form of disclosure, reproduction, distribution or any action taken or refrained from in reliance on it, is strictly PROHIBITED and may be unlawful. If you have received this transmission in error, please inform the sender immediately by e-mail at the above address and destroy this e-mail. Thank you.
The sender does not accept liability for any errors or omissions in the contents of this message, which may arise as a result of e-mail transmission.
Von: Rave
Gesendet: Donnerstag, 28. August 2014 22:50
An: Werner Göbel
Betreff: AW: Update von Acrobat 8.0 auf 8.3
AW: Update von Acrobat 8.0 auf 8.3
created by Rave<https://forums.adobe.com/people/Rave> in Acrobat Installation & Update Issues - View the full discussion<https://forums.adobe.com/message/6682731#6682731>
< This thread has been answered a duplicate of Update von Acrobat 8.0 auf 8.3<https://forums.adobe.com/thread/1558776> >
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6682731#6682731
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Acrobat Installation & Update Issues by email<mailto:discussions-community-acrobat-installation_and_update_installation@adobe-v7.hosted.jivesoft ware.com> or at Adobe Community<https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=47 14>
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Warum Sie antworten nicht auf meine Frage??
Wie muss ich Instaliren??
Beste Grüße
Werner Göbel
Mobil: +41 (0) 79 559 83 21
Skype:<skype:werner6331?call> Werner Göbel<skype:werner6331?call> (werner6331)
IGH Holding AG
Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Der Inhalt dieser E-Mail ist ausschließlich für den bezeichneten Adressaten bestimmt. Bitte beachten Sie in diesem Fall, dass jede Form der Kenntnisnahme, Veröffentlichung, Vervielfältigung oder Weitergabe des Inhalts dieser E-Mail UNZULÄSSIG ist. Wenn Sie nicht der richtige Adressat bzw. sein Vertreter sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Vielen Dank. Der Versender übernimmt keine Haftung für die Richtigkeit oder Vollständigkeit der Meldung. Eventuell entstandene Schäden die aus den Inhalten dieser Meldung resultieren werden vom Versender nicht übernommen.
This e-mail may contain confidential and/or privileged information. Access to this e-mail by anyone else is unauthorized. If you are not the intended recipient (or have received this e-mail in error), any form of disclosure, reproduction, distribution or any action taken or refrained from in reliance on it, is strictly PROHIBITED and may be unlawful. If you have received this transmission in error, please inform the sender immediately by e-mail at the above address and destroy this e-mail. Thank you.
The sender does not accept liability for any errors or omissions in the contents of this message, which may arise as a result of e-mail transmission.
Von: Bill@VT
Gesendet: Sonntag, 31. August 2014 22:09
An: Werner Göbel
Betreff: AW: AW: Update von Acrobat 8.0 auf 8.3
AW: AW: Update von Acrobat 8.0 auf 8.3
created by Bill@VT<https://forums.adobe.com/people/Bill%40VT> in Acrobat Installation & Update Issues - View the full discussion<https://forums.adobe.com/message/6689459#6689459>

Cisco ISE Installation

HI SIRS
I have a big problem with cisco identity service engine 1.0 ,
cisco said that you can install this software on esx 4.0 , I have tried it but in does not work ,
Is there anyone here to work with this new software?
I wonder , if you could help me.
BEST REGARDS.

For the ISE installation (any version) kindly refer to the hardware requirement this helps and make installation very easy. Also do check the following links for vmware machine and ise installation
http://www.cisco.com/en/US/docs/security/ise/1.1.1/installation_guide/ise_vmware.html
http://www.youtube.com/watch?v=TZuCK610TJI

Cisco ISE installation on VMware Workstation ?

I am trying to install Cisco ISE image through Vmaware Workstation , but after starting VM getting redhat console but not the same console required for setup of actual ISE . Would like to know whether VMware workstation supported for ISE installation as all the cisco docs specifies the image to be mounted on ESX server, then login to client to run setup.. Please help...

Cisco "Officially" supports VMWare's ESXi/vSphere platform. Yes, ISE works in VMWare Workstation, but is not tested on every hardware platform available, therefore, not supported. The the case mentioned above,
I've started installing ISE 1.2 (redhat linux 5 64 bit) , looking at the posts above.. on VMware workstation 9..
1stly I gave 6gb ram ( my laptop has 6 gb ram & 290gb free space ) and started the installation process..
then after the starting stage of checking the requirements of my laptop started and the formatting of the disk began , my lap became very slow & it got hanged there..all my pc processes moved like snails..!! got frustated..
then I restarted my lap and this time I gave 4gb ram .. and it worked fine from then on..
can anyone tell me , if this has to do anthing with the physical memory we give over there in the ise installtion process..does it actually use the entire ram we mention over there..??
Niklas
All possible System RAM was allocated to the ISE VM, and the ISE VM used ALL of the RAM leaving none for the host OS, thereby slowing the machine to a crawl. Once this Virtual RAM was sized to the ISE minimum of 4GB (leaving 2GB dedicated to the host OS), the machine worked correctly. Yes, the ISE VM will happily use ALL the RAM allocated to it.
This is also the reason that Virtual Box and other "Desktop" class virtualization environments cannot be supported across the board. Nearly every machine hosting VMWare Workstation, Virtual Box, etc... has a different chipset, video card, HD controller, and on, and on...
The best thing to do for your situation is to try to install it. If it works, document your EXACT system configuration and the EXACT virtual configuration so that you may look back to it for future installs. You can also use this information to "tweak" the virtual settings until you get a combination that works for you. This will help to document the configurations that do not work on YOUR desktop environment.
Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.
Charles Moreton

AW: [Acrobat Installation & Update Issues] Update von Acrobat 8.0 auf 8.3

Hallo
Sehen Sie in der Anlage.
Alles ist original.
Ich möchte jetzt eine kostenlose Fehlerbeseitigung.
Oder geben Sie mir eine kostenloses Update.
Ich habe ein Anrecht darauf.
Beste Grüße
Werner Göbel
Mobil: +41 (0) 79 559 83 21
Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Der Inhalt dieser E-Mail ist ausschließlich für den bezeichneten Adressaten bestimmt. Bitte beachten Sie in diesem Fall, dass jede Form der Kenntnisnahme, Veröffentlichung, Vervielfältigung oder Weitergabe des Inhalts dieser E-Mail UNZULÄSSIG ist. Wenn Sie nicht der richtige Adressat bzw. sein Vertreter sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Vielen Dank. Der Versender übernimmt keine Haftung für die Richtigkeit oder Vollständigkeit der Meldung. Eventuell entstandene Schäden die aus den Inhalten dieser Meldung resultieren werden vom Versender nicht übernommen.
This e-mail may contain confidential and/or privileged information. Access to this e-mail by anyone else is unauthorized. If you are not the intended recipient (or have received this e-mail in error), any form of disclosure, reproduction, distribution or any action taken or refrained from in reliance on it, is strictly PROHIBITED and may be unlawful. If you have received this transmission in error, please inform the sender immediately by e-mail at the above address and destroy this e-mail. Thank you.
The sender does not accept liability for any errors or omissions in the contents of this message, which may arise as a result of e-mail transmission.
Von: Bill@VT
Gesendet: Mittwoch, 27. August 2014 16:16
An: Werner Göbel
Betreff: Update von Acrobat 8.0 auf 8.3
Update von Acrobat 8.0 auf 8.3
created by Bill@VT<https://forums.adobe.com/people/Bill%40VT> in Acrobat Installation & Update Issues - View the full discussion<https://forums.adobe.com/message/6678331#6678331>
How did you purchase? AA8 has not been available for almost 8 yrs or so. The only current version available from Adobe is 11 and you can not upgrade from 7 to 11, but have to buy the full product.
Updates also require the use of the S/N of the qualifying product (AA7 in your case) to be able to use the newer product. So at this point, it is unclear what you actually have.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6678331#6678331
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Acrobat Installation & Update Issues by email<mailto:discussions-community-acrobat-installation_and_update_installation@adobe-v7.hosted.jivesoft ware.com> or at Adobe Community<https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=47 14>
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

< This thread has been answered a duplicate of Update von Acrobat 8.0 auf 8.3 >

WG: [Acrobat Installation & Update Issues] Update von Acrobat 8.0 auf 8.3

Hallo
Ich bin ein korrekter Mensch.
Sie sehen in der Anlage, dieser Mail, das ich das Produkt ehrlich gekauft habe.
Ich verwende nur original Software.
Die Acrobat Version 8.0, war immer sehr gut für mich.
Diese Version reichte für mich vollkommen aus.
Ich hatte einen Computerabsturz und musste Acrobat auch neu installieren.
Die Acrobat Version 8.0, ohne Update, stürzt immer ab.
Das können Sie auch im Internet lesen.
Jeder weiß das, dass Acrobat Version 8.0, ohne Update abstürzt.
Es gibt aber dies Update nicht mehr zum Download.
Ich erwarte jetzt von Adobe, kostenlose Abhilfe.
Ich möchte jetzt eine kostenlose Fehlerbeseitigung.
Oder geben Sie mir ein kostenloses Update auf die neue Version.
Ich habe ein Anrecht darauf, dass Sie mir kostenlosen Ersatz liefern.
Beste Grüße
Werner Göbel
Mobil: +41 (0) 79 559 83 21
Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Der Inhalt dieser E-Mail ist ausschließlich für den bezeichneten Adressaten bestimmt. Bitte beachten Sie in diesem Fall, dass jede Form der Kenntnisnahme, Veröffentlichung, Vervielfältigung oder Weitergabe des Inhalts dieser E-Mail UNZULÄSSIG ist. Wenn Sie nicht der richtige Adressat bzw. sein Vertreter sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Vielen Dank. Der Versender übernimmt keine Haftung für die Richtigkeit oder Vollständigkeit der Meldung. Eventuell entstandene Schäden die aus den Inhalten dieser Meldung resultieren werden vom Versender nicht übernommen.
This e-mail may contain confidential and/or privileged information. Access to this e-mail by anyone else is unauthorized. If you are not the intended recipient (or have received this e-mail in error), any form of disclosure, reproduction, distribution or any action taken or refrained from in reliance on it, is strictly PROHIBITED and may be unlawful. If you have received this transmission in error, please inform the sender immediately by e-mail at the above address and destroy this e-mail. Thank you.
The sender does not accept liability for any errors or omissions in the contents of this message, which may arise as a result of e-mail transmission.
Von: Bill@VT
Gesendet: Mittwoch, 27. August 2014 16:16
An: Werner Göbel
Betreff: Update von Acrobat 8.0 auf 8.3
Update von Acrobat 8.0 auf 8.3
created by Bill@VT<https://forums.adobe.com/people/Bill%40VT> in Acrobat Installation & Update Issues - View the full discussion<https://forums.adobe.com/message/6678331#6678331>
How did you purchase? AA8 has not been available for almost 8 yrs or so. The only current version available from Adobe is 11 and you can not upgrade from 7 to 11, but have to buy the full product.
Updates also require the use of the S/N of the qualifying product (AA7 in your case) to be able to use the newer product. So at this point, it is unclear what you actually have.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6678331#6678331
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Acrobat Installation & Update Issues by email<mailto:discussions-community-acrobat-installation_and_update_installation@adobe-v7.hosted.jivesoft ware.com> or at Adobe Community<https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=47 14>
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

I was not trying to imply that you improperly purchased the product, but that the source may have been a rip off and that could be the problem. From what I can see, it appears that you were able to install Acrobat, but can not do the updates. In that case, try the updates from the ftp site. I will have to come back with the address that I do not have on this machine. The html updates are no longer available for some reason, but the ftp site contains all the updates. You do have to install the updates in order in general, though you only have to reboot after the last update. I will change computers and find the ftp link to provide you.
The ftp site is: ftp://ftp.adobe.com/pub/adobe/acrobat/.

WG: [Acrobat Installation & Update Issues] WG: [Acrobat Installation & Update Issues] Update von Acrobat 8.0 auf 8.3

Mein Guter Freund.
Ich brauche nur eine Datei mit einem Vollen Update.
Ich möchte das Update mit einer EXE starten können..
Beste Grüße
Werner Göbel
Mobil: +41 (0) 79 559 83 21
Skype:<skype:werner6331?call> Werner Göbel<skype:werner6331?call> (werner6331)
Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Der Inhalt dieser E-Mail ist ausschließlich für den bezeichneten Adressaten bestimmt. Bitte beachten Sie in diesem Fall, dass jede Form der Kenntnisnahme, Veröffentlichung, Vervielfältigung oder Weitergabe des Inhalts dieser E-Mail UNZULÄSSIG ist. Wenn Sie nicht der richtige Adressat bzw. sein Vertreter sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Vielen Dank. Der Versender übernimmt keine Haftung für die Richtigkeit oder Vollständigkeit der Meldung. Eventuell entstandene Schäden die aus den Inhalten dieser Meldung resultieren werden vom Versender nicht übernommen.
This e-mail may contain confidential and/or privileged information. Access to this e-mail by anyone else is unauthorized. If you are not the intended recipient (or have received this e-mail in error), any form of disclosure, reproduction, distribution or any action taken or refrained from in reliance on it, is strictly PROHIBITED and may be unlawful. If you have received this transmission in error, please inform the sender immediately by e-mail at the above address and destroy this e-mail. Thank you.
The sender does not accept liability for any errors or omissions in the contents of this message, which may arise as a result of e-mail transmission.
Von: Bill@VT
Gesendet: Donnerstag, 28. August 2014 17:15
An: Werner Göbel
Betreff: WG: Update von Acrobat 8.0 auf 8.3
WG: Update von Acrobat 8.0 auf 8.3
created by Bill@VT<https://forums.adobe.com/people/Bill%40VT> in Acrobat Installation & Update Issues - View the full discussion<https://forums.adobe.com/message/6681580#6681580>
I was not trying to imply that you improperly purchased the product, but that the source may have been a rip off and that could be the problem. From what I can see, it appears that you were able to install Acrobat, but can not do the updates. In that case, try the updates from the ftp site. I will have to come back with the address that I do not have on this machine. The html updates are no longer available for some reason, but the ftp site contains all the updates. You do have to install the updates in order in general, though you only have to reboot after the last update. I will change computers and find the ftp link to provide you.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6681580#6681580
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Acrobat Installation & Update Issues by email<mailto:discussions-community-acrobat-installation_and_update_installation@adobe-v7.hosted.jivesoft ware.com> or at Adobe Community<https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=47 14>
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Warum Sie antworten nicht auf meine Frage??
Wie muss ich Instaliren??
Beste Grüße
Werner Göbel
Mobil: +41 (0) 79 559 83 21
Skype:<skype:werner6331?call> Werner Göbel<skype:werner6331?call> (werner6331)
IGH Holding AG
Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Der Inhalt dieser E-Mail ist ausschließlich für den bezeichneten Adressaten bestimmt. Bitte beachten Sie in diesem Fall, dass jede Form der Kenntnisnahme, Veröffentlichung, Vervielfältigung oder Weitergabe des Inhalts dieser E-Mail UNZULÄSSIG ist. Wenn Sie nicht der richtige Adressat bzw. sein Vertreter sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Vielen Dank. Der Versender übernimmt keine Haftung für die Richtigkeit oder Vollständigkeit der Meldung. Eventuell entstandene Schäden die aus den Inhalten dieser Meldung resultieren werden vom Versender nicht übernommen.
This e-mail may contain confidential and/or privileged information. Access to this e-mail by anyone else is unauthorized. If you are not the intended recipient (or have received this e-mail in error), any form of disclosure, reproduction, distribution or any action taken or refrained from in reliance on it, is strictly PROHIBITED and may be unlawful. If you have received this transmission in error, please inform the sender immediately by e-mail at the above address and destroy this e-mail. Thank you.
The sender does not accept liability for any errors or omissions in the contents of this message, which may arise as a result of e-mail transmission.
Von: Bill@VT
Gesendet: Sonntag, 31. August 2014 22:09
An: Werner Göbel
Betreff: AW: AW: Update von Acrobat 8.0 auf 8.3
AW: AW: Update von Acrobat 8.0 auf 8.3
created by Bill@VT<https://forums.adobe.com/people/Bill%40VT> in Acrobat Installation & Update Issues - View the full discussion<https://forums.adobe.com/message/6689459#6689459>

I can't install 10.5.2 because of an installer package issue. Can anyone help me out?

I recently bought the Iphone 4S and wanted to sync my phone to my PC. I was prompted to download the latest version of Itunes 10.5.2 but the installation was interrupted due to a "installer package issue". Has anyone encountered this issue and resolved it accordingly? Any help would be greatly appreciated.

If you have more than one account now (e.g., one created during the install, and one/more restored from a back up), have you tried installing the combo (110 MB) update from the account you created during the erase & install (the very first admin account created)? If not, try logging into that account and try installing the combo update and see if the problem goes away. Then do a permissions repair (it might take a while).

ISE Posture Remediation issue with AV client installation

Problem: If user start AV client installation in pc via AV link remediation after some time (while AV client installation not completed yet) trend micro Update windows gets pop up but not start automatic AV or AS def remediation and Cisco NAC agent shows the message AV definition is not up to date.
Also some time NAC agent give message automatic remediation failed or required user intervention to press ok so NAC can complete remediation process.
I am facing this issues when users don’t have Antivirus client in pc and performing client installation.
We have the following posture policies,
1      AV installation check: if AV is not installed in PC then perform link remediation and let user to download the Antivirus client from provided link.
2      AV definition & AS definition version check (both remediation requirement I putted in one policy): if AV or AS definition version found old then perform automatic remediation.
3.     WSUS check
4      SP   check
Actually I want, first user install AV client via link remediation once installation complete then move to AV & AS def remediation if required (because in first time AV client installation it automatically download all update from the AV server) otherwise def remediate policy wait for AV client installation completion.
Please can anybody let me know how remediation work internally ? like if "AV inst" remediation start so nac agent wait for it completion and don't start other remediation process e.g AS & AV def?
Second question:what is remediation process sequence ?
Third question: is there anyway we can configure timer in remediation process e.g 5 min for AV inst then 3 min for AV & AS def remediation and then go to other posture remediations ?

Please check the below guide for Posture Configuration:
http://www.cisco.com/en/US/products/ps11640/products_tech_note09186a0080c15540.shtml

ISE installation problem

Hi Security Experts,
We got two new ISE 3315 boxes for our datacenter today.
When I went on to do installation for them, I am facing weird problem. I see weird characters/misspelled words. I have tried rebooting the box with no help and the issue persisted after reboot as well. I also tried to boot them from DVD and even the BIOS boot options are all weird. Problem I am facing is that I type some character and it appears as a totally different character on terminal Has anybody seen similar issue? If so, what is the workaround? I have configured Cisco recommended console settings for ISE.
Please!type 'seuup'(to configure thm appmiance
localhost login:

isehyd1/admin# sh ip route
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
10.240.161.48   0.0.0.0         255.255.255.240 U     0      0        0 eth0
0.0.0.0         10.240.161.49   0.0.0.0         UG    0      0        0 eth0
isehyd1/admin# sh int gigabitEthernet 0
GigabitEthernet 0
          Link encap:Ethernet HWaddr 5C:F3:FC:25:CF:EA
          inet addr:10.240.161.55 Bcast:10.240.161.63 Mask:255.255.255.240
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
          Interrupt:169 Memory:e8100000-e8110000

Adobe cs6: extracting files, installer detects issues. Using Photoshop, the program crashes quickly.

I'm in the process of downloading Adobe cs6, and when I extract the downloaded files, installer detects a machine restart is pending, but even after restarting the computer, and retrying to extract the files the issue persists. So I tried ignoring the problem, (as that is one of the options) and completing the download, but then when I go ahead and use Photoshop, I only get to use it for less than 20 seconds and the program completely shuts down. I have no clue how to fix this problem.
I've tried unistalling Adobe cs6 and reistalling it multiple times, but no luck.
I've also downloaded the update published by adobe today (11/26/2012) but i still have this problem.
I don't know how to solve this issue, doesn anyone have any suggestions as how to fix it?
i'm using windows 7, and AMD Professional firepro graphics card
Thanks Stef

Hi Stef. You’ve posted your question in a forum that is for beginners trying to learn the basics of Photoshop. I'm moving your question to the Downloading, Installing, Setting Up forum for specialized attention to your situation.

Adobe acrobat 9 pro installation/licensing issues

I installed my licensed copy of Acrobat 9 on a new Windows 7 system. Acrobat launched but would not open files and shuts down on attempt. Message is "Licensing for this product has stopped working" with subtext "You cannot use the product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT administrator or Adobe customer support for help."
I doubt any of you have a solution, so I simply remark on what transpired as a warning and complaint:
1. I went to Adobe databse and found that a patch was provided to correct installations/licensing problems on windows 7. I downloaded it and installed per instructions. It did not resolve the problem.
2. I uninstalled/reinstalled several times. no resolution.
3. I called customer support and was outsourced to someone who knew little and first sent me to a kb article having to do with 'expired licensing' even though I clearly informed them that the message and the fact had nothing to do with expired licenses. They finally referred me to kb405970 on "Licensing has stopped working". I tried all of the applicable solutions (methods 1-6) and none of them worked. Now I will have to wait until tomorrow (though I had pressing work to do today) to contact support again. I fear I will get another outsourced tech who knows little and wastes more of my time. Such is Adobe's way of supporting paid and licensed product users.
I understand and sympathize with Adobe's wishes to protect its products from piracy. However, I expect and paid for a product which works on major and supported operating systems like windows 7. I also understand that if MS or Mac put out a new OS or version, it may require certain adjustments or updates on Adobe's part. What I do not understand (or have patience with) is that 1) Adobe failed to provide a patch that works; 2) that it then sends me to an outsourced customer service tech who didn't have the knowledge to correct the problem and gave me the wrong information to begin with*. What I finally got was the kb article with a series of multi-step instructions for several methods, none of which worked. This is an unprofessional and unethical response to those of us who have paid for our product and expect it to work under reasonable conditions in a supported environment. This is not an acceptable good-faith effort to resolve issues for which Adobe should take full responsibility.
If any of you do happen to have a real solution (or had a similar problem) do let me know....
*The first thing the outsourced tech wished to do was get onto my machine via a remote connection, before anything was tried other than giving them the error message and have them provide me with the wrong information. It became clear that this person had less knowledge than I do (which isn't saying much) and there was no way I was going to permit a clueless techie to crawl around in my machine and fiddle with settings. That is simply asking for trouble. I'm perfectly capable of opening panels and following instructions myself. DC should be the last thing tried; not the first.

Bill, I tried as you suggested - installed every update from 9.1 through 9.3.4. The 'license not working message persists'. The only change was that now Acrobat will not close and must be forced to shut down from the taskbar menu. I appreciate the suggestion though.
Called Adobe (Manila) again, within the hours given on their contact page for installation and licensing issues, and was told "It's Sunday, nobody here can help you". Finally, after an hour of hammering got them to get me a supervisor (their script says to tell the customer there "Is no supervisor available on Sunday" - Finally the "supervisor", Alvin, suggested I need a new serial number and left me on the line while he called someone else to get on. Cameback and informed me that he couldn't get one, I'd have to call Monday (how's that for having solutions?) Result: wasted more time and had more delay on my project.
Conclusion: Adobe has become obsessed and 'piranoic' about piracy and licensing to the extent that they put that first and client/customer needs second (if that). After reading a lot of online 'Adobe Sucks' forums, I'm inclined to believe Adobe is shooting itself in its own foot and is not going to be a reliable method of presentation/document transmission in the future - service and support is an integral part of software and other concerns such as piracy or licensing need to be transparent to legitimate users. Sad that they spend so much time on this, when they need to be fixing real problems. As well, these outsourcing Philipines companies are poor substitutes for good support - they are so scripted and obsessed with regulations over solutions that it is clear that only the most persistent users will get anywhere with them. As a frontline of contact with after-sale clients, they are going to cost Adobe a lot of potential business in the future, whatever their short-term savings. Too bad. Adobe used to be a leader in the market.
Next round: Calling Manila again this am. to be continued...

ISE installation - reimaging issue

Similar Messages

Maybe you are looking for