ISE maximum concurrent user (same user)

Hi buddies
Is possible Cisco ISE, limit the simultaneous login?
Example:
Use A has laptop, iphone, ipad, android table and android mobile. Today, the user can login in corporate wlan simultaneous (with same user/pass) in all devices.
The customers wants limit, for example, 3 simultaneos login (with same user/pass), by SSID, for example for SSID Vip simultaneous login = 5, for SSID X, simultaneous login = 3.
The WLC redirect all SSID (guest(WEB-AUTH) and corporate (802.1X)) to ISE

Similar Messages

  • How does ISE count concurrent users ?

    Ciao,
    trying to make sense of ISE concurrent users licensing, does it count a user only when it's connected ?
    If I have 500 users Active Directory (using groups in policy) or 500 users in local database, are there differences in count ?
    Regards,
    Iarno

    Hello,
    Active Directory and local DB users are not counted separately. The  count is on the basis of number of user and non-user endpoints  connected. They can be Printers, IP Phones, labtops, iphones and android  phones etc.
    A High Level Design (HLD) is a document which is required to be  submitted by ATP and non-ATP partners of ISE at the time or before they  place an order for ISE products except lab and wireless only orders. HLD  should be written by an ISE Trained Engineer.
    Reason behind getting a HLD submitted by the partners is to make sure  the ISE is deployed properly as it is supposed to be. There is a SAC BU  approved template of HLD which needs to be filled and sent to  [email protected], where a dedicated team review that particular HLD  and approves if they find all the information correct in the document.
    Best Regards.

  • Maximum concurrent user on OC4J Stand Alone ?

    Hi All,
    I have questions on OC4J :
    1) How many concurrent user that can be supported by OC4J 10.1.3 Stand Alone ?
    2) What is different between OC4J Stand Alone and OC4J Stand Alone that comes with JDev ?
    Thank you,
    xtanto

    Hi,
    1.) This depends on your application and of the configuration of OC4J (for example JVM parameter).
    2.) Afaik there is no difference between both OC4J. OC4J which comes with JDev
    is the J2EE runtime environment for JDeveloper. For development purposes it is much easier to use the embedded OC4J instead of deploying first the application to a remote OC4J.
    Regards
    Kersten

  • Maximum concurrent users?

    Hello,
    We have a potential customer which would have ~1000-1500 registered users (thank $deity$ not all concurrent). What are the max concurrent users your system has and what kind of hardware do you have to pull if off?

    There are no built-in constraints. It's dependent on your hardware resources.
    There is no easy answer to your question. It's like saying, I have a vehicle, how much petrol do I need to drive from San Francisco to New York? :)
    You could start by looking at the Forms Capacity Planning Guide in the Forms area on OTN:
    http://www.oracle.com/technology/products/forms/index.html
    Regards,
    Robin Zimmermann

  • Max Concurrent users

    Has any one idea how many concurrent users can Sun One 6.0 support ?
    We are doing Load testing of web application on Sun One 6.0 using LoadRunner. The maximum concurrent users that it is supporting is around 25. If Users are more than 25 then the application context of web application gets refreshed and few user transactions gets failed.
    Is there any way to exceed this limit ? and plz tell if anyone has done load testing on Sun One 6.0

    well by concurrent users i mean 25 users logging at that very instant.
    And application context (servletcontext) gets refreshed means - like i am maintaing connection pool object and user hashmap object at application level.
    code in JSP ::application.setAttribute ("connpool",ObjConnPool)
    when no of concurrent users get more, all logging at same time, then these objects r removed from application (servletcontext) and i get null pointer exception as objects r no more binded to application(servletcontext). This definately means application(servletcontext) has refreshed

  • Concurrent Users in OBIEE

    Hello,
    How can we set the number of concurrent users who will use the OBIEE application?
    Thanks in Advance.

    There is a setting in the Repository for the connection pools for maximum concurrent users.

  • ISE limitation for concurrent user (same user)

    Dears,
    I have cisco ISE 3355 version 2.0.4.018 my question is how can I limit the authenticated user to access only two devices by his username and password.
    where I have cisco ISE integrated with AD for internal employee that access internal SSID and I need to limit employee access for two devices only (PC and Phone)
    So anyone can help me??
    Regards,                  

    The current ISE release 1.1 doesn't have a feature that allows to limit of concurrent user sessions (either Guests or regular 802.1x users) as the ACS 5.3/5.4 does. However, I guess this feature is scheduled for release, ISE 1.2
    Jatin Katyal
    - Do rate helpful posts -

  • How to get Maximum Number of Concurrent users for last few days?

    Hi,
    How I can get maximum number of concurrent users which were logged in to the system (ECC 5.0) I mean I want to check the hostory for last few weeks. Is there any way to get the same? I know that I can get Cumulative number of users in st03 under Expert mode but that is the number of users logged into the system during the day. Is there any place where SAP maintians the High Watermark of Number of concurrent users reached in the system?
    Thanks in advance...
    Regards,
    Pravin

    Sorry I really missed that I have posted a question here on sdn. I wanted to know this for planning the system hardware requirements. Activities like PM ( Performance Management ) happens once a year and during that activity we see heavy user loan on the system so if I have the exact stats of 1 or 2 years data I can size the system better next time. Fortunately last 2 years PM was very smooth for us. In that look for the improvement because each time we had little extra Harware. By doing the exact analysis we can save a Cost of ownership...
    I was looking for R/3 users. I could see the number in st07 but I want to know the exact number at particular time.. I believe that st07 stores only for few days.
    Thanks
    Pravin

  • Maximum number of concurrent users in RDC

    Hi
    Can anyone tell me what is the maximum number of concurrent users
    that can view reports running under RDC component ?
    thanks

    The RDC is limited to three concurrent processes. Only reason I was after the craxdrt.dll v.s. craxddrt.dll is that craxddrt requires extra licensing. Anyhow, the article [Crystal Reports XI Release 2 Component Licensing Explained|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/804acc00-8364-2b10-b995-de99ca43c403&overridelayout=true] has more detailed information. I understand you are using CR 10 and the doc title is CR XI r2, but as far as the RDC the licensing details remain the same between the two versions.
    Ludek

  • Maximum number of concurrent users that can connect to a SQL DB

    I see various SQL DB plan S0, S1, S2 and P1, P2 and P3.  Each one of them talk about DTU's but never talk about the max number of concurrent users.  Where can I find that number and is it configurable by the end user?

    It is the maximum connection that is most important. Best practice is not to have users holding on to their connection for long period of time. Maximum user connection in SQL is 32767, resource permitting. Not sure for Azure SQL. If you follow best
    practice, you are not supposed to hit this limit cause other limits will be hit first.
    Frank

  • Concurrent user logins using same user ID- Is it Possible?

    Hi Experts,
    I want to know how can I make the configuration for user ID in SAP to login in to the system at once through different machings. Basically concurrent user logins using same user ID.
    Is this is possible?  whats the configuaration? Am I violating any SAP license policies?
    Please help me with this.

    just for the knowledge, it is possible and via following parameter
    login/disable_multi_gui_login
    http://help.sap.com/saphelp_nw04s/helpdata/en/22/41c43ac23cef2fe10000000a114084/content.htm
    However, it is not permitted to use in Production at all. But sometimes, only in critical situations, for eg. we have only a few basis IDs and some maintenance task is to be carried out involving more resources, multiple gui login can be utilized in sandbox to for that ID.
    But, it is for sure that, USMM report will be sent to SAP for the sandbox too. So client is subjectable. If you, as a basis guy, are going to try it, then please do it only after the confirmation from the client and only if client needs it.

  • How do you set maximum number of concurrent users to OBIEE

    In a training session for the end users - only 4 users could connect - after this others could not connect - got NQS Error:100118 Access for the connection is refused

    As I don't see any configuration tag to specify concurrent users.
    Try this, go to connection pool (within RPD) and set the maximum number of connections, this does correspond to number of concurrent connections to database but not concurrent users.
    mark posts promptly.
    -bifacts
    http://www.obinotes.com
    J
    Edited by: bifacts on Dec 21, 2010 12:14 PM

  • Maximum Number of Concurrent User Sessions Limit?

    Please can you tell me if there is a limit for the maximum number of concurrent users sessions that can access the Portal? If so, where is the setting and how do I change it?
    By the way, I am not experiencing any issues; I am asking purely for information purposes
    Thanks.

    There used to be under one of the services in service configuration.  I thought it was under portal runtime, but I can´t see it now.  It mentioned it in the TZTEP1 course, but I haven´t got it with me.
    Having said that, I don´t know if it worked!
    Paul

  • Maximum number of concurrent users

    What is the maximum number of concurrent users any single given Airport can handle? I believe it is ten...
    Thank you!

    If the AirPort is configured to create a wireless network, the AirPort Express can handle up to 10 users. The AirPort Extreme and Time Capsule will handle up to 50.

  • Scalability in BlazeDS - What is the maximum number of concurrent users possible with BlazeDS?

    Hi all,
    is there a limit on the number of concurrent users that can connect via BLAZEDS? I see many places that it is only in 100s and not in 1000s.
    is that true? Anybody has doen performance testing on that?
    Thanks
    Kiran

    What is practical? Probably between 1 and 6 streams can be done with reasonable use of bandwidth. However, keep in mind that you will likely want to use the lowest quality setting for cameras so they are demanding the least amount of bandwidth.
    Using the Connect 8 numbers, Low quality webcam video with the room at LAN settings should have an aprox average bandwidth consumption of 184 kbps. From there it is just simple math. 6 live streams at that setting will be 1.1 Mbps. Alternatively, at High quality webcam video and with the room at LAN, each stream will average aprox 501 kbps. 6 streams will average 3 Mbps.

Maybe you are looking for