Ise patch 1 and 2 for 1.1.4 problem with resetting-application
Hi guys,
For your info. ISE patch 1 and 2 got the same problem on 1.1.4. If you got patches installed and tries to reset the application of ISE the monitoring applets are all gone. It's loading an empty page. Solution: rollback any installed patches. Monitoring is back up again. Install the patches again and erverything is fine. Took me one afternoon to figure this out.
Hi Ravi,
Do you know, what is going wrong? I'm wondering if everything is working correctly and if patches are applied correctly.
Similar Messages
-
I have a problem with loading the application by the name of "hayday".after the latest update,in the middle of connecting to the servers,it crashes and comes bck to the home screen of my ipad.
I have and ipad II wifi, ios 4.3, and an ipod touch 4th generation,and i have the same problem on both of them.
Please someone,anyone help me with it.Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
i am going to buy unlocked iphone 5.. i will be going to india nxt months and will stay there for a while... so my question is will i get warrenty in india.. and will there be any problem with using indian sims..?? thnx for the help..
The warranty for the iPhone is not and has never been International.
Warranty and support are ONLY valid in the country of origin. The only exception is the EU where the entire EU is treated as one country.
If the device will be used in India, buy it in India.
An unlocked iPhone will work on any supported GSM carrier world wide. The LTE portion of a US purchased, unlocked iPhone is unlikely to work outside North America as it does not support the appropriate bands used in other countries. -
I have Windows 7 and just recently experienced a problem with itunes freezing up when I clicked on the "apps" tab which shows the apps that are loaded on my phone. Everything else in the itunes software seems to be working okay. The problem is in the part where you sync the newly purchased apps. The apps will all be blank that are downloaded and that part of the software crashes itunes or freezes up. I can get out of itunes okay after the freeze up, but it just stops me from syncing anything that I have newly added. If anyone has had this problem before or knows someone that has, please let me know how I can fix it. I have uninstalled and reloaded itunes 4 or 5 times, but the problem is still there. I might add that I have been using itunes and purchasing apps for 2 to 3 years without any problems. HELP.
You would get better response from the iTunes community forum.
Have a nice day! -
When using google maps through Firefox, after asking for a place which is not the general North America section which routinely comes up, the firefox screen goes white, with a narrow banner at the top. A message appears in the lower right corner which says something about display drivers having had a problem, but now have recovered. However the display doesn't recover and the banner message is that Firefox is not responding. When I go to restart Firefox if I go to the restore point, the page is still frozen out.
I do not believe it is a problem with my computer because it doesn't happen if I use I.E. to go to google maps, then G-maps works normally.
This phenomenon did not happen before the latest upgrade to either Google or Firefox. I have used Fiefox for a number of years and also Google Maps on previous computers and on this one, and not had this before.
This is a relatively young computer (Asus EeSlate 121) less than a year old. I have used Firefox since I bought it and until recently had no problem with Google Maps.I solved it myself, after the "note" which came back from FF/Mozilla just as I finished my message, commenting on what it was that my system had , I wnnt back to check my plug-ins etc. I downloaded the latest Java, BOTH 32bit AND 64 bit versions and latest Firefox.
Now all is working.
Thanks,
B. -
Both xp and windows 7 have video problems with my VGA connection using TV
both xp and windows 7 have video problems with my VGA connection using TV as my monitor when it gets to starting up windows no matter what version it will not I have let my mac on all night and still says starting windows or the windows 7 logo and nothing else will happen also when I use a 3rd patty software like peraills or other it works like a charm how to fix it?
To map the drive on your computer click on Start - RUN - type "\\192.168.1.1" and click ok... When prompted for Username and Password type "admin" and click ok... Now you will be able to see the folder which you have shared on your router, right click on it and select "Map network drive" and click on finish.
Now it will map the drive on your computer and you should be able to transfer the file from your computer to the USB drive. -
Is it somebody Except for me Who has problems With waching videos on ipad after the 5.0.1 update
Is it somebody Except for me Who has problems With waching videos on ipad after the 5.0.1 update
Hi,
yes I have big problems as soon as I open the video app i get a total black screen, even the upper bar with the time disappears. I already tried to:
1. closing the app and reopen it
2. restart the iPad
3. restore the iPad via iTunes
4. Begging the app to work again. -
I have migrated from London to New Delhi and i am facing some problem with my iPhone 4s and i am not able to setup a repair .My phone is in under warranty too. Can anyone tell whats the matter?
The warranty is NOT international. You must take it back to the country of origin if it needs repair. The E.U. is considered a single country for warranty purposes.
-
I installed Lion and now seem to have problems with Microsoft Silverlight and other plug ins and applications. I haven't ever used time machine to back up (my bad I know). Is there a way to go back to snow leopard with messing up all my files and my set?
Are you using the latest version of Silverkeeper? - v.2.0.2 is stated to be compatible with Snow Leopard.
http://www.lacie.com/silverkeeper/
If it's messing things up you could try asking LaCie Support for assistance. -
Is there a fix yet for the no sound problem with lion on the iMac without having to restart every time I switch the computer on?
Try booting in Safe Mode by holding the the shift key immediately after powering on your system. Safe boot mode will for a directory check of your startup volume, then load only the required kernal extensions (kext files), and deletes some cache files. Once the system boots into Safe Mode you can simply restart the system to see whether the issue has been resolved.
If you still have the issue try resetting the SMC by shutting down the system and disconnecting the power cord for ~15 seconds, then reconnecting the power cord. Next, reset the parameter RAM (PRAM) by holding down the option-option-P-R keys after powering ON the system. Wait until the iMac restarts twice, then let the system boot normally. -
I recently upgraded to Lion, and immediately started having consistent problems with Open Office 12 (would hang, and need a Force quit to recover). Has anybody else seen these problems? Any solutions other than going back to Snow Leopard? (I did). But I'd like to use iCloud with iPad.
Hi Pete. The repair of disk permissions can help resolve any application crashing or misbehaving.
As for Lion and the two camps, I think that is a reasonable observation. In my office we have about a dozen Mac's and about one third of those Mac's had problems after updating from 10.6 to 10.7. The main problem for these Mac's was a loss of wifi stability. But for the other two-thirds, Lion was a smooth transition.
Personally, my Lion experience was fine. But I did get a new i7 MacBook Pro with Lion already installed and only had to migrate my user data from a 10.6.8 TM backup.
So I think that is a key for Lion's operational success. A clean install of Lion on a new Mac would not cause too many operational issues. But an installation, or more correctly, an update to Lion from SL increased the chances of failure for some users - especially when old software & plugins resided on the Mac. And I would say that they were the people that you saw at the Apple store.
As for the "latest release of Lion fixed my problems" statement, my experience with these and other forums is that people mostly only go there to complain about the problems they are having. If they are having no problems then they either keep it to themselves or they try to help the users who are experiencing trouble... -
I have 2 ipads 1st ipad 2G and ipad 3G whats the problem with the 3G ipad the wifi is now getting connected to the wifi modem and the ipad 2G is getting connected no problem with the 2G ipad what should i do...????? And I had checked with my iball baton router with the iball sevice provider.
Hi there Paula120,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W. -
Is there a forum devoted to old laptops like the pb100? I'm trying to resurrect one and would like to discuss problems with others so engaged.
Duane Bluhm
duane
<Email Edited by Host>Duane,
For hardware questions, try here:
https://discussions.apple.com/community/older_hardware
(the Older PowerBooks category)
For software, try here:
https://discussions.apple.com/community/mac_os/classic_mac_os
(the System 7 category)
Jan -
I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.Hi David-
The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html -
When I open Iphoto, I see all my photos for a second and then they disappear and only a white dotted box appears. Then I click on it and for photos is a triangle with an exclamation point. It doesn't happen to all but quite a lot. how to I get them back
Have you recently deleted photos using the finder or run clean up software? Is so restore your backup
If not the backup your iPhoto Library and launch iPhoto while depressing the option and command keys. Rebuild your database
LN
Maybe you are looking for
-
How to save "Form Letters" in Mail
I am trying to figure out a way to save a draft email that I can use again and again. Right now, if the email is in Draft folder, and I send it away, it disappears from the folder. What I want it to do is keep a copy in there that I can use over and
-
Hi everyone, I am getting this DSM Terminator window popup when I close any of my WD application. I thought it was because those RFCs calls that I make but it isn't related. I created a simple HelloWorld project, created an iView and a Page. When I p
-
What are the new tax patches to be attached for the FY 2008 in India....
Hi Experts.... What are the new tax patches to be added for the tax calculations for the Financial year 2008.Please advice... regards, sai.
-
Editing web.xml OR weblogic.xml programmatically
Hi there, I am trying to edit the web.xml and weblogic.xml programmatically. I am trying to load the above deployment descriptors in DOM object. But as DTD is mentioned externally, connection to URL is failing. But weblogic.jar contains all DTD in lo
-
IMessage has no phonenumber assigned
hi@all I currently hav following problems with my iMessage account. Since upgrade to iOS7 (iphone5 and ipad) i only have my mail adresses on iMessage available and not my phonenumber. I´ve logged out my apple-id from iMessage and facetime on both app