[ISE] Posture Status - Not applicable

Hi,
I configured WiFi Guest Access with WLC and ISE and it works great.
Now I want to check client posture.
I configured a posture policy
On Windows7 client, I installed NAC client. With network sniffer, I can see SWISS protocol (TCP 8905) between client and ISE.
In authentications log, Posture Status is always "NotApplicable"
Why is this posture not applicable?
Thanks a lot!
Patrick

Hello Tarik,
Result NonCompliant: http://uploaddeimagens.com.br/imagens/result_noncompliant-jpg
Posture rule: http://uploaddeimagens.com.br/imagens/posture_rule-jpg
The client provisioning is set to force NAC Agent version 4.9.0.47
Yes, the vlan is correct.
The major problem is the NotApplicable ststus in the posture log, the ISE is not applying the posture, some times works fine, some times dont work and appear the NotApplicable in the log.

Similar Messages

Pending Move Transaction ****Error: Status not applicable for this Locator.

Hi guys,
Let me know if you have experienced the following error in the pending move tranasctions with Back flush process?
Message error:
Status not applicable for this Locator.
Transaction processor error
Thanks,

the receiving with locator works only if there is a valid default locator defined in the system.
There is no option to enter the Locator manually in the receiving pages of iProcurement.
Locator and/or serial controlled Items must be received in the Core PO Receipt Form and not in iProcurement.
Cannot Receive Requisitions For Inventory Items Which Are Locator And/Or Serial Controlled (Doc ID 809408.1)
Also refer to the below,
Unable To Receive Inventory Item In iProcurement or Core Apps Receiving Due To Locator Error (Doc ID 819083.1)

ISE Posture Status Pending

Hello,
I am newly configuring and testing Posturing/Client Provissioning on ISE. I configured Client_Provissioning Policy without any Posture_Policy just to test it works or not.
My Wireless client can authenticate and get and install NAC_Agent successfully, but after that no network access is given to the client pc.
on the ISE Authentication Reports it shows ( Posture Status Pending )
and on the Wireless client everytime when i open browser i get this message " Cisco Agent was detected and is running. If you are still unable to access the network please contact you administrator"
I dont know what is the issue, plz help

Hi Ravi,
I have not yet configured any Posture policies. i have configured only client-provissioning policy, i want to first test client-provissioning works properly before applying any Posture-Policy.
So My wireless clients are correctly redirected and recieve NAC Agent, but afterthat it seems that the NAC_Agent does not do anything and does not send any report back to ise for further processings.
on the ise Authentication Report i can see, the client is stuck in UKNOWN-STATUS , and shows Posture_Status Pending...
it does not go to Uncompliant or Compliant Status.
I dont know what can be the issue? neither ISE shows me the error , nor the WLC.

Ise posture status notapplicable

Hello ,
after upgrading ISE 1.2 to 1.2.1 , I can't see posture status (pending) although it is working properly. I tried to install patch 1 but the same result.
before upgrading , posture status was Pending when posture status still not reach to ISE.

I have same problem too.
When workstation install NacAgent 4.9.4.3 successfully, then the posture will be stucked.
I didn't see about NAC Agent on report: "Posture Detailed Assessment" and "Client Provisioning"
Any help or advice please ? Should I configure the redirect ACL, dACL, switch ACL, or something like that ?

ISE posture redirect not working

ISE v1.1.0.665, 3395 h/w.
Single Admin/Monitor/Policy node.
WS-C3560-48TS 12.2(55)SE5 C3560-IPBASEK9-M
For Client Provisioning I created an authorisation policy as follows:
download acl "ACL-POSTURE-REMEDIATION"
apply url redirect "ACL-POSTURE-REDIRECT".
"Debug radius" shows all this is downloaded to the switch but:
- Redirect does not work.
- dACL is not applied if the URL redirect is also configured.
Wireshark on the client shows no direct.
Attached file shows "debug radius" for various combinations of authorisation policy i.e. dACL only, Redirect only, dACL + Redirect.
I've also attached screen shots of these policies and wireshark.

Grant,
It looks like you are changing the vlan after your client gets an ip address, it seems like the client gets an ip address of
192.168.16.164 and you are changing the vlan over to 516. I wanted to know if that is there isnt an ip to vlan mismatch before you move forward. If 516 is quarantine vlan you may want to start all clients on that vlan and use dynamic vlan assignment through change of authorization once a client becomes compliant. The reason is is that you can use the web portal, or the nac agent to change the ip address once the vlan is changed.
Thanks,
Tarik Admani

KB2524478 Detected As Not Applicable

Microsoft recently released KB2524478 (The network location profile changes from "Domain" to "Public" in Windows 7 or in Windows Server 2008 R2) to WSUS. Neither of my two WSUS instances detects any of my Windows Server 2008 R2 SP1 systems as needing
the update, though (status = Not Applicable). Everything looks good in WSUS (the update is not declined); I've verified that the files in the KB are newer versions than the ones my servers; and I successfully downloaded the update from the Microsoft
Download Center and manually installed it (no errors or other statements that it wasn't applicable). There are no special requirements listed in the KB article, so I can't figure out why WSUS thinks my servers don't need the update. Is there something
I'm missing?
Below is 30 minutes worth of output from WindowsUpdate.log after stopping and restarting the Windows Update agent service on one of my servers and then doing a wuauclt /resetauthorization /detectnow. Looks normal to me.
2012-04-19 12:37:01:617 820 f38 AU ########### AU: Uninitializing Automatic Updates ###########
2012-04-19 12:37:02:320 820 f38 Report CWERReporter finishing event handling. (00000000)
2012-04-19 12:37:02:352 820 f38 Service *********
2012-04-19 12:37:02:352 820 f38 Service ** END ** Service: Service exit [Exit code = 0x240001]
2012-04-19 12:37:02:352 820 f38 Service *************
2012-04-19 12:37:14:883 820 a5c Misc =========== Logging initialized (build: 7.5.7601.17514, tz: -0500) ===========
2012-04-19 12:37:14:883 820 a5c Misc   = Process: C:\Windows\system32\svchost.exe
2012-04-19 12:37:14:883 820 a5c Misc   = Module: c:\windows\system32\wuaueng.dll
2012-04-19 12:37:14:883 820 a5c Service *************
2012-04-19 12:37:14:883 820 a5c Service ** START ** Service: Service startup
2012-04-19 12:37:14:883 820 a5c Service *********
2012-04-19 12:37:14:883 820 a5c Agent   * WU client version 7.5.7601.17514
2012-04-19 12:37:14:898 820 a5c Agent   * Base directory: C:\Windows\SoftwareDistribution
2012-04-19 12:37:14:898 820 a5c Agent   * Access type: No proxy
2012-04-19 12:37:14:898 820 a5c Agent   * Network state: Connected
2012-04-19 12:37:28:788 820 e74 Report CWERReporter::Init succeeded
2012-04-19 12:37:28:788 820 e74 Agent *********** Agent: Initializing Windows Update Agent ***********
2012-04-19 12:37:28:788 820 e74 Agent *********** Agent: Initializing global settings cache ***********
2012-04-19 12:37:28:788 820 e74 Agent   * WSUS server:
http://<SUS Server>
2012-04-19 12:37:28:788 820 e74 Agent   * WSUS status server:
http://<SUS Server>
2012-04-19 12:37:28:788 820 e74 Agent   * Target group: (Unassigned Computers)
2012-04-19 12:37:28:788 820 e74 Agent   * Windows Update access disabled: No
2012-04-19 12:37:28:788 820 e74 DnldMgr Download manager restoring 0 downloads
2012-04-19 12:37:28:804 820 e74 AU ########### AU: Initializing Automatic Updates ###########
2012-04-19 12:37:28:804 820 e74 AU   # WSUS server:
http://<SUS Server>
2012-04-19 12:37:28:804 820 e74 AU   # Detection frequency: 22
2012-04-19 12:37:28:804 820 e74 AU   # Approval type: Pre-install notify (Policy)
2012-04-19 12:37:28:804 820 e74 AU   # Auto-install minor updates: No (Policy)
2012-04-19 12:37:29:148 820 a5c Report *********** Report: Initializing static reporting data ***********
2012-04-19 12:37:29:148 820 a5c Report   * OS Version = 6.1.7601.1.0.196882
2012-04-19 12:37:29:148 820 a5c Report   * OS Product Type = 0x0000000E
2012-04-19 12:37:29:148 820 a5c Report   * Computer Brand = VMware, Inc.
2012-04-19 12:37:29:148 820 a5c Report   * Computer Model = VMware Virtual Platform
2012-04-19 12:37:29:148 820 a5c Report   * Bios Revision = 6.00
2012-04-19 12:37:29:148 820 a5c Report   * Bios Name = PhoenixBIOS 4.0 Release 6.0
2012-04-19 12:37:29:148 820 a5c Report   * Bios Release Date = 2011-04-15T00:00:00
2012-04-19 12:37:29:163 820 a5c Report   * Locale ID = 1033
2012-04-19 12:37:29:195 820 e74 AU Successfully wrote event for AU health state:0
2012-04-19 12:37:29:195 820 e74 AU Initializing featured updates
2012-04-19 12:37:29:195 820 e74 AU Found 0 cached featured updates
2012-04-19 12:37:29:195 820 e74 AU Successfully wrote event for AU health state:0
2012-04-19 12:37:29:195 820 e74 AU Successfully wrote event for AU health state:0
2012-04-19 12:37:29:195 820 e74 AU AU finished delayed initialization
2012-04-19 12:37:29:195 820 e74 AU Triggering AU detection through DetectNow API
2012-04-19 12:37:29:195 820 e74 AU Triggering Online detection (non-interactive)
2012-04-19 12:37:29:195 820 a5c AU #############
2012-04-19 12:37:29:195 820 a5c AU ## START ## AU: Search for updates
2012-04-19 12:37:29:195 820 a5c AU #########
2012-04-19 12:37:29:195 820 a5c AU <<## SUBMITTED ## AU: Search for updates [CallId = {0635BB08-288E-4D31-9F51-2D480FBC42E3}]
2012-04-19 12:37:29:195 820 ba0 Agent *************
2012-04-19 12:37:29:195 820 ba0 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2012-04-19 12:37:29:195 820 ba0 Agent *********
2012-04-19 12:37:29:195 820 ba0 Agent   * Online = Yes; Ignore download priority = No
2012-04-19 12:37:29:195 820 ba0 Agent   * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1
or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2012-04-19 12:37:29:195 820 ba0 Agent   * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2012-04-19 12:37:29:195 820 ba0 Agent   * Search Scope = {Machine}
2012-04-19 12:37:29:195 820 ba0 Setup Checking for agent SelfUpdate
2012-04-19 12:37:29:195 820 ba0 Setup Client version: Core: 7.5.7601.17514 Aux: 7.5.7601.17514
2012-04-19 12:37:29:195 820 ba0 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2012-04-19 12:37:29:210 820 ba0 Misc Microsoft signed: Yes
2012-04-19 12:37:31:788 820 ba0 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2012-04-19 12:37:31:788 820 ba0 Misc Microsoft signed: Yes
2012-04-19 12:37:31:804 820 ba0 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2012-04-19 12:37:31:804 820 ba0 Misc Microsoft signed: Yes
2012-04-19 12:37:31:804 820 ba0 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2012-04-19 12:37:31:804 820 ba0 Misc Microsoft signed: Yes
2012-04-19 12:37:31:867 820 ba0 Setup Determining whether a new setup handler needs to be downloaded
2012-04-19 12:37:31:867 820 ba0 Setup SelfUpdate handler is not found. It will be downloaded
2012-04-19 12:37:31:867 820 ba0 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.4.7600.226"
2012-04-19 12:37:31:867 820 ba0 Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.4.7600.226" is not applicable
2012-04-19 12:37:31:867 820 ba0 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.4.7600.226"
2012-04-19 12:37:31:898 820 ba0 Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.4.7600.226" is not applicable
2012-04-19 12:37:31:898 820 ba0 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.4.7600.226"
2012-04-19 12:37:31:945 820 ba0 Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.4.7600.226" is not applicable
2012-04-19 12:37:31:945 820 ba0 Setup SelfUpdate check completed. SelfUpdate is NOT required.
2012-04-19 12:37:32:288 820 ba0 PT +++++++++++ PT: Synchronizing server updates +++++++++++
2012-04-19 12:37:32:288 820 ba0 PT   + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL =
http://<SUS Server>/ClientWebService/client.asmx
2012-04-19 12:37:32:288 820 ba0 PT WARNING: Cached cookie has expired or new PID is available
2012-04-19 12:37:32:288 820 ba0 PT Initializing simple targeting cookie, clientId = 12237968-1016-4f2d-89ce-fd6730363556, target group = , DNS name = <Client DNS Name>
2012-04-19 12:37:32:288 820 ba0 PT   Server URL =
http://<SUS Server>/SimpleAuthWebService/SimpleAuth.asmx
2012-04-19 12:37:33:163 820 ba0 PT +++++++++++ PT: Synchronizing extended update info +++++++++++
2012-04-19 12:37:33:163 820 ba0 PT   + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL =
http://<SUS Server>/ClientWebService/client.asmx
2012-04-19 12:37:33:288 820 ba0 Agent   * Found 0 updates and 60 categories in search; evaluated appl. rules of 375 out of 625 deployed entities
2012-04-19 12:37:33:304 820 ba0 Agent *********
2012-04-19 12:37:33:304 820 ba0 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2012-04-19 12:37:33:304 820 ba0 Agent *************
2012-04-19 12:37:33:304 820 ba0 Report REPORT EVENT: {EC975DBE-82E5-4402-9733-C0648B489D94} 2012-04-19 12:37:33:304-0500 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Software
Synchronization Windows Update Client successfully detected 0 updates.
2012-04-19 12:37:33:304 820 af8 AU >>## RESUMED ## AU: Search for updates [CallId = {0635BB08-288E-4D31-9F51-2D480FBC42E3}]
2012-04-19 12:37:33:304 820 af8 AU   # 0 updates detected
2012-04-19 12:37:33:304 820 af8 AU #########
2012-04-19 12:37:33:304 820 af8 AU ## END ## AU: Search for updates [CallId = {0635BB08-288E-4D31-9F51-2D480FBC42E3}]
2012-04-19 12:37:33:304 820 af8 AU #############
2012-04-19 12:37:33:304 820 af8 AU Successfully wrote event for AU health state:0
2012-04-19 12:37:33:304 820 af8 AU Featured notifications is disabled.
2012-04-19 12:37:33:304 820 af8 AU AU setting next detection timeout to 2012-04-20 14:34:00
2012-04-19 12:37:33:304 820 af8 AU Successfully wrote event for AU health state:0
2012-04-19 12:37:33:304 820 af8 AU Successfully wrote event for AU health state:0
2012-04-19 12:37:33:320 820 ba0 Report CWERReporter finishing event handling. (00000000)
2012-04-19 12:37:38:304 820 ba0 Report REPORT EVENT: {21339474-376B-45FB-BD4D-DA41E28A4197} 2012-04-19 12:37:33:304-0500 1 156 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Pre-Deployment
Check Reporting client status.
2012-04-19 12:37:38:304 820 ba0 Report CWERReporter finishing event handling. (00000000)
2012-04-19 12:44:26:356 820 ba0 Report Uploading 2 events using cached cookie, reporting URL =
http://<SUS Server>/ReportingWebService/ReportingWebService.asmx
2012-04-19 12:44:26:372 820 ba0 Report Reporter successfully uploaded 2 events.
Thanks,
Mark

Hi,
Thank you for posting here.
This update you mentioned above is a hotfix.Hotfixes cannot be deployed via WSUS unless the update is published in the Microsoft Catalog.
In this case, the update do publish in the Microsoft Catalog.if the server 08 r2 doesn't have the Symptom describled in
http://support.microsoft.com/kb/2524478 ,and also read as not "Not Applicable",it probably indicate it is not applicable, this kb also indicate this hotfix might receive additional testing. Therefore,
if you are not severely affected by this problem, we recommend that you wait for the next software update that contains this hotfix. In short, pls simply decline this hotfix in the wsus console.
Regards,
Clarence
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
[email protected]
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Purchase request with Approve, Not applicable status

Question,
I try to use Service procurement to create contractor PR. All the approver have approved it but the status still show as Approved, Not applicable and I cannot assign contractor from HR to this in the crontroctar tab.
Any clue?

hi iswari
you can acheieve this prodided you have maintained the corresponding currencny in the Schedulling agreement, kinldy maintain the curren in ME32k and assing the agreement while converting purchase requisition to purchase order .Since you are creating the order the price will be in the currency you have maintained in customizing.
youcan also enter the price in MO, just double click the operation and in external tab page select the FULL SERVICE button in the bottom of the screen, anew screeen will appear where you will enter the overall limit and expected value
regards
thyagarajan

Windows 7 SP1 client shows status of "Not Applicable" for every single update

Windows 7 SP1 client
Every update, including all Critical Updates for Windows 7, show a status of "Not Applicable" when running a "Computer Detailed Status Report"
The computer is current in updating its status with the WSUS server.
I am hoping that you can suggest reasons why this would be.
Thanks!
mk

It is only the one computer that has all of its updates listed as 'Not Applicable'
Some of these are the same updates that other computers show as 'Installed'
Any other ideas?
Yep!
Every update, including all Critical Updates for Windows 7, show a status of "Not Applicable" when running a "Computer Detailed Status Report"
The computer is current in updating its status with the WSUS server.
One of those two statements is not true.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Cisco ISE - Posturing of a Linux Endpoint - Is it possible?

We have a customer who wants to implement Cisco ISE and one of their requests is to posture Linux endpoints in addition to Windows endpoints.
They have a set of system checks that they perform on Linux machines (catered towards RedHat) which they would like to be performed by ISE.
From what I know prior to researching for this request was that the NAC agent is only compatible with endpoints running Windows or Mac OSX.
Digging around, Linux endpoints are postured with a 'default-posture' status and thus an accompanying authorization profile must be set for 'default-posture'. I can't seem to find how to perform file checks, service checks, etc. on a Linux endpoint. Are these type of checks possible with Cisco ISE posture assessment on a Linux endpoint?
One item that I found is to use the Host Scan package within the AnyConnect Posture module on a Linux endpoint.
I see this as defeating the purpose of centralizing posturing on the ISE since the AnyConnect and ASA will be doing the posture checking.
Any thoughts? Thanks in advance.

Hello Alberto, posture assessment is not yet supported with ISE/AnyConnect. For more info check out the posture section in the ISE 1.3 Admin Guide:
http://www.cisco.com/c/en/us/td/docs/security/ise/1-3/admin_guide/b_ise_admin_guide_13/b_ise_admin_guide_sample_chapter_010111.html
Thank you for rating helpful posts!

Posture Status for Smartphones - Android - Pending

I am trying to pass smartphones through our ISE infrastructure. I have Windows working properly, it assigns a certificate, joins to the employee network, installs the NAC client, and requires remediation action.
When an Android phone (haven't tried iOS yet) tries to connect it receives a certificate, is profiled as Android, and then gets stuck in posture status pending.
I have attached a screenshot.
Thanks.

I was thinking - would reducing it to Registered Device (only registered devices would authenticate with 802.1x anyway) and SessionOS equals Android be vague enough to catch it and not allow it to pass?
Endpoint Id
C8:AA:21:02:16:75
Endpoint Profile
Android
IP Address
Identity Store
Identity Group
RegisteredDevices
Audit Session Id
ac1e10450000120e52056988
Authentication Method
dot1x
Authentication Protocol
EAP-TLS
This is how one android device is being profiled - I would guess that would allow it if I opened the rule up more?

ISE Posture for non-agent device problem

I have a couple of questions:
- They said it the documents: "these (non-agent) devices assume the Default Posture Status settings". I wonder how ISE determines that a device is a non-agent device, or to put it another way, when is the Default Posture Status settings applied to a device? Is it after some period of time not receiving anything from the agent? If yes, can and where do I change that time in ISE?
- I tested this with my lab and saw that: after the user successfully login with his account, and the Authorization profile with Client provisioning is applied to that session, the user goes to a web page and gets redirect to the CPP page. Now if he just sits there and doesn't install the NAC agent, I noticed that after about 40s, the session is automatically restarted to a new one, with a different session ID, but the same username. The new session gets to the point where the same redirect Authorization profile is applied and the whole process cycles over and over. Things I observed each time the session restarts:
+ The user doesn't even have to enter the credentials again. The 802.1x login doesn't popup
+ The Default Posture status (I set it to Noncompliant) is applied to the session right before it restarts. I can see an event on ISE indicating that. The event also shows the Acct-Terminate-Cause as "Admin Reset"
+ If at any point, the user installs a NAC agent then he can break the cycle (e.g becomes compliant) and carry on with other Authorization profiles
So my question is: is that expected behavior of ISE? Although it seems no harm except new sessions are created continously
Or have I configured something wrong?

Anybody?

ISE Posture Assessment

Hi,
While reading about ISE posture, I got to know that ISE searches” User Agent” attribute for string “NAC Agent” to confirm that NAC agent is present on particular machine.This information is passed to ISE when user opens Web Browser i.e. user gets redirected
If NAC agent is not present on machine then NAC agent will get downloaded and then Posture assessment starts.
While testing this on ISE, I noticed that
If NAC agent is already present on machine then directly posture assessment starts even without opening web browser.
Now my question is, how ISE does come to know that NAC agent is already present on machine without opening web browser.
Regards,
Aditya

I second Richard on the fact that it can't be done. However, I was going through this and wanted to share in case it helps.
Default Posture Status
http://www.cisco.com/en/US/docs/security/ise/1.1/user_guide/ise_pos_pol.html#wp1919363
Jatin Katyal
- Do rate helpful posts -

CS6 update 13.0.5: "This patch is not applicable for you."

I tried to install Photoshop_CS6_13_0_5_upd.dmg and got:
Update Failed
Updates could not be applied.
This patch is not applicable for you.
I bought Photoshop CS6 as a download directly from Adobe, installed Photoshop_CS6_13_0_1_upd.dmg without problems, and then activated Photoshop with offline activation on a computer not connected to the Internet. When I try to update I get these log messages:
~/Library/Application Support/Adobe/AAMUpdater/1.0/aamu.log:
2013-07-04T14:14:55: >>> Adobe Updater Log Begin >>>
2013-07-04T14:14:55: UpdaterCoreImpl::InitLogFile : Application Version 6.0.0.67
2013-07-04T14:14:55: UpdaterCoreImpl::InitLogFile : cmdline option --> -logFile = /Users/howard/Library/Application Support/Adobe/AAMUpdater/1.0/aamu.log
2013-07-04T14:14:55: UpdaterCoreImpl::InitLogFile : cmdline option --> -logLevel = 2
2013-07-04T14:14:56: UCInitialize : AAMLauncher was NOT running.
2013-07-04T14:14:56: CFU(Webfeed): Query licensing type for LEID = Photoshop-CS6-Mac-GM
2013-07-04T14:14:56: CFU(Webfeed): Patch is meant only for perpetual licenses, but client doesn't have a valid perpetual license.
2013-07-04T14:14:56: CheckForManualApplicableUpdates : The update is not applicable as per licensing checks
2013-07-04T14:14:56: UpdaterCore : Returning from << UCInitialize >> Returning with outErr Value => = 36
2013-07-04T14:16:14: Returning from << UCTerminate >> call with value = 1
2013-07-04T14:16:14: UpdaterCoreImpl::ShutdownLogFile : Going to call ShutdownESDLogFile()
2013-07-04T14:16:14: <<< Adobe Updater Log End <<<
~/Library/Logs/PDApp.log:
Thu Jul 4 09:14:50 2013    [INFO] PDApp - Build Version - 6.0.335.0
Thu Jul 4 09:14:50 2013    [INFO] PDApp - Logging Level verbosity Set to 4
Thu Jul 4 09:14:50 2013    [INFO] PDApp - Application initialization start, Looking for command line arguments
Thu Jul 4 09:14:50 2013    [INFO] PDApp.CommandLineParser - Parsing the command line provided. Number of command line arguments is 6
Thu Jul 4 09:14:50 2013    [INFO] PDApp - Non Deployment workflow identified...
Thu Jul 4 09:14:50 2013    [INFO] PDApp - No Non Deployment workflow PDApp running so new instance is allowed to run...
Thu Jul 4 09:14:50 2013    [INFO] PDApp.WindowManager - Initializing native WindowManager
Thu Jul 4 09:14:50 2013    [INFO] PDApp.MessageQuequeManager - Message Queue Manager initialized...
Thu Jul 4 09:14:50 2013    [INFO] PDApp.AsyncMsgProcessor - AsyncMsgProcessor initialized...
Thu Jul 4 09:14:50 2013    [INFO] PDApp.AsyncMsgProcessor - AsyncMsgProcessor Message Queue initialized...
Thu Jul 4 09:14:50 2013    [INFO] PDApp.ExternalGateway - ExternalGateway initialized...
Thu Jul 4 09:14:50 2013    [INFO] PDApp.AppletManager - AppletManager initialize...
Thu Jul 4 09:14:50 2013    [INFO] PDApp.ExternalGateway - NativeCommandHandler initialized...
Thu Jul 4 09:14:50 2013    [INFO] PDApp.ExternalGateway - NativePlatformHandler initialized...
Thu Jul 4 09:14:51 2013    [INFO] PDApp - Registering Notification to listen messages from another instance
Thu Jul 4 09:14:51 2013    [INFO] PDApp - Detecting Applet Database file...
Thu Jul 4 09:14:51 2013    [INFO] PDApp - Fetching Applet registeration information...
Thu Jul 4 09:14:51 2013    [INFO] PDApp.AppletManager - Applet database path - /Applications/Utilities/Adobe Application Manager/
Thu Jul 4 09:14:51 2013    [INFO] PDApp.AppletManager - PIM library path - /Applications/Utilities/Adobe Application Manager/core/AdobePIM.dylib
Thu Jul 4 09:14:51 2013    [INFO] PDApp.AppletManager - Loading PIM library...
Thu Jul 4 09:14:51 2013    [INFO] PDApp.AppletManager - Fetching PIM API's...
Thu Jul 4 09:14:51 2013    [INFO] PIM - Build Version - 6.0.335.0
Thu Jul 4 09:14:51 2013    [INFO] PIM - Logging Level verbosity Set to 4
Thu Jul 4 09:14:51 2013    [INFO] PIM - CREATE PIM Instance ...
Thu Jul 4 09:14:51 2013    [INFO] PIM - trying to createOrUpdatePIMDbSchema.
Thu Jul 4 09:14:51 2013    [INFO] PIM - Current db schema version on machine 1.
Thu Jul 4 09:14:51 2013    [INFO] PIM - Current db schema version to install 1.
Thu Jul 4 09:14:51 2013    [INFO] PIM - PIM DB Schema is up to date. Current schema version is 1.
Thu Jul 4 09:14:51 2013    [INFO] PIM - PIM Database is Up To Date.
Thu Jul 4 09:14:51 2013    [INFO] PDApp.AppletManager - Getting applet data from Applet database
Thu Jul 4 09:14:51 2013    [INFO] PDApp.AppletManager - All installed pakages version string (pim_getCurrentPackagesVersion) is D6:6.0.335.0|DECore:6.0.335.0|DWA:3.0.94.0|LWA:3.0.64.0|P6:6.0.335.0|PDApp:6.0.335.0|UWA: 6.0.335.0
Thu Jul 4 09:14:51 2013    [INFO] PIM - PIMSqlite closeDB status 0
Thu Jul 4 09:14:51 2013    [INFO] PIM - FREE PIM Instance ...
Thu Jul 4 09:14:51 2013    [INFO] PDApp.AppletManager - Registering Applets...
Thu Jul 4 09:14:51 2013    [INFO] PDApp.WindowManager - Creating APEWindow...
Thu Jul 4 09:14:51 2013    [INFO] PDApp.WindowManager - Creating window instance
Thu Jul 4 09:14:51 2013    [INFO] PDApp.WindowManager - Checking for appletID and appletVersion given in CommandLineOptions
Thu Jul 4 09:14:51 2013    [INFO] PDApp.WindowManager - Creating APE stage instance
Thu Jul 4 09:14:53 2013    [INFO] PDApp.WindowManager - Loading main SWF with Path and args - /Applications/Utilities/Adobe Application Manager
Thu Jul 4 09:14:54 2013    [INFO] PDApp.WindowManager - Assigning window ID - 1 to created window
Thu Jul 4 09:14:54 2013    [INFO] PDApp.ExternalGateway - MessageHandler initialized...
7/4/2013 09:14:54.811 [INFO] PDApp.StartupCommand Logging Level verbosity Set to INFO
7/4/2013 09:14:54.812 [INFO] PDApp.StartupCommand Processing the startup Command
7/4/2013 09:14:54.816 [INFO] PDAPP.AppletManager Starting Applet registeration...
7/4/2013 09:14:54.823 [INFO] PDAPP.MainDisplayMediator Looking up for the Exact versioned applet for ID :UWA_UI
7/4/2013 09:14:54.827 [INFO] PDAPP.AppletManager Loading Applet: UWA_UI Version = 1.0
7/4/2013 09:14:54.856 [INFO] PDApp.ZStringLoader PDAPP SWF - locale set to - en_US
7/4/2013 09:14:54.858 [INFO] PDAPP.AppletManager Loading progress0 out of 1122223
7/4/2013 09:14:54.895 [INFO] PDAPP.AppletManager Loading progress65536 out of 1122223
7/4/2013 09:14:54.898 [INFO] PDAPP.AppletManager Loading progress131072 out of 1122223
7/4/2013 09:14:54.901 [INFO] PDAPP.AppletManager Loading progress196608 out of 1122223
7/4/2013 09:14:54.904 [INFO] PDAPP.AppletManager Loading progress262144 out of 1122223
7/4/2013 09:14:54.906 [INFO] PDAPP.AppletManager Loading progress327680 out of 1122223
7/4/2013 09:14:54.936 [INFO] PDAPP.AppletManager Loading progress393216 out of 1122223
7/4/2013 09:14:54.938 [INFO] PDAPP.AppletManager Loading progress458752 out of 1122223
7/4/2013 09:14:54.939 [INFO] PDAPP.AppletManager Loading progress524288 out of 1122223
7/4/2013 09:14:54.941 [INFO] PDAPP.AppletManager Loading progress589824 out of 1122223
7/4/2013 09:14:54.943 [INFO] PDAPP.AppletManager Loading progress655360 out of 1122223
7/4/2013 09:14:54.945 [INFO] PDAPP.AppletManager Loading progress720896 out of 1122223
7/4/2013 09:14:54.946 [INFO] PDAPP.AppletManager Loading progress786432 out of 1122223
7/4/2013 09:14:54.948 [INFO] PDAPP.AppletManager Loading progress851968 out of 1122223
7/4/2013 09:14:54.950 [INFO] PDAPP.AppletManager Loading progress917504 out of 1122223
7/4/2013 09:14:54.969 [INFO] PDAPP.AppletManager Loading progress983040 out of 1122223
7/4/2013 09:14:54.971 [INFO] PDAPP.AppletManager Loading progress1048576 out of 1122223
7/4/2013 09:14:54.972 [INFO] PDAPP.AppletManager Loading progress1114112 out of 1122223
7/4/2013 09:14:54.973 [INFO] PDAPP.AppletManager Loading progress1122223 out of 1122223
7/4/2013 09:14:55.332 [INFO] Updater.AppStartup -----PROCESSING APPLICATION STARTUP COMMAND
7/4/2013 09:14:55.333 [INFO] PDApp.ExternalGateway Recieved Applet Loading Completion
7/4/2013 09:14:55.335 [INFO] Updater.AppStartup commManagerResultCallback
7/4/2013 09:14:55.338 [INFO] ZStringLoader Trying to load ZString for preferred locale - en_US
7/4/2013 09:14:55.366 [INFO] ZStringLoader Locale set to - en_US
7/4/2013 09:14:55.388 [INFO] Updater.LoadWorkflowCommand Processing the Load workflow command
Thu Jul 4 09:14:55 2013    [INFO] PDApp.AppletManager - Loading Applet - UWA_Native for WindowID - 1
Thu Jul 4 09:14:55 2013    [INFO] UWANative - Build Version - 6.0.335.0
Thu Jul 4 09:14:55 2013    [INFO] UWANative - Logging Level verbosity Set to 4
Thu Jul 4 09:14:55 2013    [WARN] UWANative - Updater UI Locale not found in input xml.
Thu Jul 4 09:14:55 2013    [INFO] UWANative - Updater in patch mode
Thu Jul 4 09:14:56 2013    [INFO] OPM - Build Version - 6.0.281.0
Thu Jul 4 09:14:56 2013    [INFO] OPM - Logging Level verbosity Set to 4
Thu Jul 4 09:14:56 2013    [INFO] OPM - Schema version and schema compatibility version are same or greater than current
Thu Jul 4 09:14:56 2013    [INFO] OPM - No Record found for the input fields
Thu Jul 4 09:14:56 2013    [INFO] OPM - Released OPM refrence successfully
Thu Jul 4 09:14:56 2013    [ERROR] UWANative - Error occured in initializing updater.Error code: 36
Thu Jul 4 09:14:56 2013    [FATAL] UWANative - Failed to initialize Updater Core
Thu Jul 4 09:14:56 2013    [ERROR] UWANative - No Applicable Updates
7/4/2013 09:14:56.856 [ERROR] UpdaterNativeApplet StartApplet indicated that Patch is not applicable: <error>NoApplicableUpdates</error>
7/4/2013 09:14:56.918 [FATAL] Updater.LoadWorkflowCommand Running in patch mode. Patch not applicable.
7/4/2013 09:14:56.957 [INFO] Updater.PopulateFinishScreenCommand -----STARTED POPULATING FINISH SCREEN------
7/4/2013 09:14:56.959 [ERROR] Updater.PopulateFinishScreenCommand Showing No applicable patches screen
7/4/2013 09:14:56.962 [INFO] AAMShared.DynamicViewMediator Showing screen with screenID : com.adobe.aam.shared.view.compositeComponent::ScreenErrorPageError
7/4/2013 09:14:57.032 [INFO] Updater.PopulateFinishScreenCommand ---COMPLETED SHOWING FINISH SCREEN---
7/4/2013 09:16:14.125 [INFO] Updater.PopulateFinishScreenCommand ------QUIT COMMAND RECEIVED------
Thu Jul 4 09:16:14 2013    [INFO] PDApp.AppletManager - Un-loading Applet - UWA_Native for window ID - 1
Thu Jul 4 09:16:14 2013    [INFO] PDApp.ExternalGateway - Callng the finalize function of the applet ID - UWA_Native
7/4/2013 09:16:14.138 [INFO] PDApp.HostMessageHandler Recieved force window close message
7/4/2013 09:16:14.139 [INFO] PDApp.HostMessageHandler Sending message to native
Thu Jul 4 09:16:14 2013    [INFO] PDApp.WindowManager - Destroying window with ID - 1
Thu Jul 4 09:16:14 2013    [WARN] PDApp.WindowManager - GetAPEWindowIDString failed, Unable to find PlayerRef!
Thu Jul 4 09:16:14 2013    [INFO] PDApp - Last window destroyed quiting as event. Quiting application as an event (async)...
Thu Jul 4 09:16:14 2013    [INFO] PDApp.WindowManager - Destroying PDApp main window with ID - 1
Thu Jul 4 09:16:14 2013    [INFO] PDApp.WindowManager - DestroyAllAPEWindow failed, APE Window count is zero while destroying all APEWindow's
Thu Jul 4 09:16:14 2013    [INFO] PDApp - Terminating MessageQueueManager
Thu Jul 4 09:16:14 2013    [INFO] PDApp.AsyncMsgProcessor - Terminating AsyncMsgProcessor Message Queue
Thu Jul 4 09:16:14 2013    [INFO] PDApp.AsyncMsgProcessor - Terminating AsyncMsgProcessor
Thu Jul 4 09:16:14 2013    [INFO] PDApp.MessageQuequeManager - Message Queue Manager destructed
Thu Jul 4 09:16:14 2013    [INFO] PDApp - Terminating AppletManager
Thu Jul 4 09:16:14 2013    [INFO] PDApp.AppletManager - AppletManager destructed
Thu Jul 4 09:16:14 2013    [INFO] PDApp - Terminating WindowManager
Thu Jul 4 09:16:14 2013    [INFO] PDApp - Terminating NativeCommandHandler
Thu Jul 4 09:16:14 2013    [INFO] PDApp.ExternalGateway - NativeCommandHandler destructed
Thu Jul 4 09:16:14 2013    [INFO] PDApp - Terminating NativePlatformHandler
Thu Jul 4 09:16:14 2013    [INFO] PDApp.ExternalGateway - NativePlatformHandler destructed
Thu Jul 4 09:16:14 2013    [INFO] PDApp - Terminating ExternalGateway
Thu Jul 4 09:16:14 2013    [INFO] PDApp.ExternalGateway - ExternalGateway destructed
Thu Jul 4 09:16:14 2013    [INFO] PDApp - Terminating APE
Thu Jul 4 09:16:14 2013    [INFO] PDApp - Releasing all locks acquired
Thu Jul 4 09:16:14 2013    [INFO] PDApp - Quiting Application
hardware: MacBook Pro 17 inch, 2.4GHz Quad-core Intel Core i7
Help > System Info...
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
Operating System: Mac OS 10.7.5
System architecture: Intel CPU Family:6, Model:42, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 2400 MHz
Built-in memory: 8192 MB
Free memory: 4576 MB
Memory available to Photoshop: 6917 MB
Memory used by Photoshop: 69 %
Image tile size: 1024K
Image cache levels: 6
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Version: 2.1 ATI-7.32.12
OpenCL Version: 1.1 (Aug 10 2012 19:59:48)
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: ATI Radeon HD 6770M OpenGL Engine
Display: 1
Main Display
Display Depth:= 32
Display Bounds:= top: 0, left: 0, bottom: 1200, right: 1920
Video Renderer ID: 16915206
Video Card Memory: 1009 MB
Video Rect Texture Size: 16384
Serial number: 91199981517320233480
Application folder: Macintosh HD:Applications:Adobe Photoshop CS6:
Photoshop scratch has async I/O enabled
Scratch volume(s):
Macintosh HD, 370.1G, 69.1G free
n, 327.2G, 80.4G free
Required Plug-ins folder: Macintosh HD:Applications:Adobe Photoshop CS6:Adobe Photoshop CS6.app:Contents:Required:
Primary Plug-ins folder: Macintosh HD:Applications:Adobe Photoshop CS6:Plug-ins:
Additional Plug-ins folder: not set
Installed components:
   adbeape.framework   adbeape   3.3.8.19346   66.1025012
   AdbeScriptUIFlex.framework   AdbeScriptUIFlex   6.2.29.18602   66.490082
   adobe_caps.framework   adobe_caps   6.0.29.0   1.276181
   AdobeACE.framework   AdobeACE   2.19.18.20743   66.507768
   AdobeAGM.framework   AdobeAGM   4.26.20.20743   66.507768
   AdobeAXE8SharedExpat.framework   AdobeAXE8SharedExpat   3.7.101.18636   66.26830
   AdobeAXEDOMCore.framework   AdobeAXEDOMCore   3.7.101.18636   66.26830
   AdobeBIB.framework   AdobeBIB   1.2.02.20743   66.507768
   AdobeBIBUtils.framework   AdobeBIBUtils   1.1.01   66.507768
   AdobeCoolType.framework   AdobeCoolType   5.10.33.20743   66.507768
   AdobeCrashReporter.framework   AdobeCrashReporter   6.0.20120720
   AdobeExtendScript.framework   AdobeExtendScript   4.2.12.18602   66.490082
   AdobeJP2K.framework   AdobeJP2K   2.0.0.18562   66.236923
   AdobeLinguistic.framework      17206
   AdobeMPS.framework   AdobeMPS   5.8.0.19463   66.495174
   AdobeOwl.framework   AdobeOwl   4.0.95   66.510504
   AdobePDFL.framework   AdobePDFL   10.0.1.18562   66.419471
   AdobePDFSettings.framework   AdobePDFSettings   1.4
   AdobePIP.framework   AdobePIP   6.0.0.1654
   AdobeScCore.framework   AdobeScCore   4.2.12.18602   66.490082
   AdobeUpdater.framework   AdobeUpdater   6.0.0.1452   "52.338651"
   AdobeXMP.framework   AdobeXMPCore   66.145661   66.145661
   AdobeXMPFiles.framework   AdobeXMPFiles   66.145661   66.145661
   AdobeXMPScript.framework   AdobeXMPScript   66.145661   66.145661
   ahclient.framework   ahclient   1.7.0.56
   aif_core.framework   AdobeAIF   3.0.00   62.490293
   aif_ocl.framework   AdobeAIF   3.0.00   62.490293
   aif_ogl.framework   AdobeAIF   3.0.00   62.490293
   AlignmentLib.framework   xcode   1.0.0.1
   amtlib.framework   amtlib   6.0.0.75
   boost_date_time.framework   boost_date_time   6.0.0.0
   boost_signals.framework   boost_signals   6.0.0.0
   boost_system.framework   boost_system   6.0.0.0
   boost_threads.framework   boost_threads   6.0.0.0
   Cg.framework   NVIDIA Cg
   CIT.framework   CIT   2.0.5.19287   145486
   data_flow.framework   AdobeAIF   3.0.00   62.490293
   dvaaudiodevice.framework   dvaaudiodevice   6.0.0.0
   dvacore.framework   dvacore   6.0.0.0
   dvamarshal.framework   dvamarshal   6.0.0.0
   dvamediatypes.framework   dvamediatypes   6.0.0.0
   dvaplayer.framework   dvaplayer   6.0.0.0
   dvatransport.framework   dvatransport   6.0.0.0
   dvaunittesting.framework   dvaunittesting   6.0.0.0
   dynamiclink.framework   dynamiclink   6.0.0.0
   FileInfo.framework   FileInfo   66.145433   66.145433
   filter_graph.framework   AdobeAIF   3.0.00   62.490293
   hydra_filters.framework   AdobeAIF   3.0.00   62.490293
   ICUConverter.framework   ICUConverter   3.61   "gtlib_3.0" "." "16615"
   ICUData.framework   ICUData   3.61   "gtlib_3.0" "." "16615"
   image_compiler.framework   AdobeAIF   3.0.00   62.490293
   image_flow.framework   AdobeAIF   3.0.00   62.490293
   image_runtime.framework   AdobeAIF   3.0.00   62.490293
   LogSession.framework   LogSession   2.1.2.1652
   mediacoreif.framework   mediacoreif   6.0.0.0
   PlugPlug.framework   PlugPlug   3.0.0.383
   UpdaterNotifications.framework   UpdaterNotifications   6.0.0.24   "6.0.0.24"
   wrservices.framework
Required plug-ins:
   Accented Edges 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Adaptive Wide Angle 13.0, Copyright © 2012 Adobe Systems Incorporated - from the file “Adaptive Wide Angle.plugin”
   ADM 3.10x16, Copyright © 1987-2008 Adobe Systems Inc. All rights reserved. - from the file “AdobeADM.bundle”
   Angled Strokes 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Average 13.0.1 20120808.r.519 2012/08/08:21:00:00 ©1993-2012 Adobe Systems Incorporated - from the file “Average.plugin”
   Bas Relief 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   BMP 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Camera Raw 7.4 (137), Copyright © 2013 Adobe Systems Incorporated - from the file “Camera Raw.plugin”
   Chalk & Charcoal 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Charcoal 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Chrome 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Cineon 13.0.1 20120808.r.519 2012/08/08:21:00:00 ©2002-2012 Adobe Systems Incorporated - from the file “Cineon.plugin”
   Clouds 13.0.1 20120808.r.519 2012/08/08:21:00:00 ©1993-2012 Adobe Systems Incorporated - from the file “Clouds.plugin”
   Collada DAE 13.0.1 20120808.r.519 2012/08/08:21:00:00 ©2006-2012 Adobe Systems Incorporated - from the file “U3D.plugin”
   Color Halftone 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Colored Pencil 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   CompuServe GIF 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Conté Crayon 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Craquelure 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Crop and Straighten Photos 13.0.1 20120808.r.519 2012/08/08:21:00:00 ©2003-2012 Adobe Systems Incorporated - from the file “CropPhotosAuto.plugin”
   Crop and Straighten Photos Filter 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Crosshatch 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Crystallize 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Cutout 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Dark Strokes 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   De-Interlace 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Difference Clouds 13.0.1 20120808.r.519 2012/08/08:21:00:00 ©1993-2012 Adobe Systems Incorporated - from the file “Clouds.plugin”
   Diffuse Glow 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Displace 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Dry Brush 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Eazel Acquire 13.0.1 20120808.r.519 2012/08/08:21:00:00 ©1997-2012 Adobe Systems Incorporated - from the file “EazelAcquire.plugin”
   Embed Watermark NO VERSION - from the file “DigiSign.plugin”
   Enable Async I/O 13.0.1 20120808.r.519 2012/08/08:21:00:00 © 2004-2012 Adobe Systems Incorporated - from the file “Enable Async IO.plugin”
   Extrude 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   FastCore Routines 13.0.1 20120808.r.519 2012/08/08:21:00:00 ©1990-2012 Adobe Systems Incorporated - from the file “FastCore.plugin”
   Fibers 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Film Grain 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Filter Gallery 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Fresco 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Glass 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Glowing Edges 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Grain 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Graphic Pen 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Halftone Pattern 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   HDRMergeUI 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “HDRMergeUI.plugin”
   IFF Format 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Ink Outlines 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   JPEG 2000 13.0.1 20120808.r.519 2012/08/08:21:00:00 Â©2001-2012 Adobe Systems Incorporated - from the file “JPEG2000.plugin”
   Lens Blur 13.0, Copyright © 2002-2012 Adobe Systems Incorporated - from the file “Lens Blur.plugin”
   Lens Correction 13.0, Copyright © 2002-2012 Adobe Systems Incorporated - from the file “Lens Correct.plugin”
   Lens Flare 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Liquify 13.0, Copyright © 2001-2012 Adobe Systems Incorporated - from the file “Liquify.plugin”
   Matlab Operation 13.0.1 20120808.r.519 2012/08/08:21:00:00 ©1993-2012 Adobe Systems Incorporated - from the file “ChannelPort.plugin”
   Measurement Core 13.0.1 20120808.r.519 2012/08/08:21:00:00 ©1993-2012 Adobe Systems Incorporated - from the file “MeasurementCore.plugin”
   Mezzotint 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   MMXCore Routines 13.0.1 20120808.r.519 2012/08/08:21:00:00 ©1990-2012 Adobe Systems Incorporated - from the file “MMXCore.plugin”
   Mosaic Tiles 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Multiprocessor Support 13.0.1 20120808.r.519 2012/08/08:21:00:00 ©1990-2012 Adobe Systems Incorporated - from the file “MultiProcessor Support.plugin”
   Neon Glow 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Note Paper 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   NTSC Colors 13.0.1 20120808.r.519 2012/08/08:21:00:00 ©1993-2012 Adobe Systems Incorporated - from the file “NTSC Colors.plugin”
   Ocean Ripple 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Oil Paint 13.0, Copyright © 2011 Adobe Systems Incorporated - from the file “Oil Paint.plugin”
   OpenEXR 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Paint Daubs 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Palette Knife 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Patchwork 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Paths to Illustrator 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   PCX 13.0.1 20120808.r.519 2012/08/08:21:00:00 ©1989-2012 Adobe Systems Incorporated - from the file “PCX.plugin”
   Photocopy 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Photoshop 3D Engine 13.0.1 20120808.r.519 2012/08/08:21:00:00 ©2006-2012 Adobe Systems Incorporated - from the file “Photoshop3DEngine.plugin”
   Picture Package Filter 13.0.1 20120808.r.519 2012/08/08:21:00:00 ©1993-2012 Adobe Systems Incorporated - from the file “ChannelPort.plugin”
   Pinch 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Pixar 13.0.1 20120808.r.519 2012/08/08:21:00:00 ©1989-2012 Adobe Systems Incorporated - from the file “Pixar.plugin”
   Plaster 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Plastic Wrap 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   PNG 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Pointillize 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Polar Coordinates 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Portable Bit Map 13.0.1 20120808.r.519 2012/08/08:21:00:00 ©1989-2012 Adobe Systems Incorporated - from the file “PBM.plugin”
   Poster Edges 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Radial Blur 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Radiance 13.0.1 20120808.r.519 2012/08/08:21:00:00 ©2003-2012 Adobe Systems Incorporated - from the file “Radiance.plugin”
   Read Watermark NO VERSION - from the file “DigiRead.plugin”
   Reticulation 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Ripple 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Rough Pastels 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Save for Web 13.0, Copyright © 1999-2012 Adobe Systems Incorporated - from the file “Save for Web.plugin”
   ScriptingSupport 13.0, Copyright © 2012 Adobe Systems Incorporated - from the file “ScriptingSupport.plugin”
   Shear 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Smart Blur 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Smudge Stick 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Solarize 13.0.1 20120808.r.519 2012/08/08:21:00:00 ©1993-2012 Adobe Systems Incorporated - from the file “Solarize.plugin”
   Spatter 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Spherize 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Sponge 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Sprayed Strokes 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Stained Glass 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Stamp 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Sumi-e 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Targa 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Texturizer 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Tiles 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Torn Edges 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Twirl 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Underpainting 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Vanishing Point 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “VanishingPoint.plugin”
   Water Paper 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Watercolor 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
   Wave 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Wind 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
   Wireless Bitmap 13.0.1 20120808.r.519 2012/08/08:21:00:00 ©1989-2012 Adobe Systems Incorporated - from the file “WBMP.plugin”
   ZigZag 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Optional and third party plug-ins:
   PG-Processor 2.0.1 ©2002-2010 PixelGenius LLC - from the file “PG-Processor.plugin”
   PhotoKit Capture Sharpener 2 2.0.7 ©2002-2010 PixelGenius LLC - from the file “PhotoKit Sharpener 2.plugin”
   PhotoKit Creative Sharpener 2 2.0.7 ©2002-2010 PixelGenius LLC - from the file “PhotoKit Sharpener 2.plugin”
   PhotoKit Output Sharpener 2 2.0.7 ©2002-2010 PixelGenius LLC - from the file “PhotoKit Sharpener 2.plugin”
   PhotoKit Preview Helper 2.1.6 ©2002-2010 PixelGenius LLC - from the file “PG Toolbox Previewer.plugin”
   PixelGenius Toolbox 2.2.2 ©2002-2010 PixelGenius LLC - from the file “PixelGenius Toolbox.plugin”
Plug-ins that failed to load: NONE
Flash: NONE
Installed TWAIN devices: NONE

This girl here found the fix:
How to Manually Fix Updates on Adobe Photoshop CS6 (from 13.0.3 to 13.0.6) on Mac with Retina Display |
Basically, all you have to do is update the Application Manager (if your installation was like mine, I was still on v.6... it's up to v.9 now. Go here for the update: Adobe - Adobe Application Manager : For Macintosh : Adobe Application Manager and run it... when done, launch Photoshop and check for updates.
This is amazingly idiotic, I must add -- how does App Manager NOT update itself through the update process???

An update installed using DISM in install.wim seen as "Not Applicable" by WSUS report instead of "Installed"

Hi all,
To make server's installation faster, I intend to make an updated "install.wim" every 6 months using DISM.
Then, after installation, the Win2012R2 server connect to a WSUS server to get the latests update not included in the install.wim.
As a test, I used DISM to install an update in the install.wim file of Windows 2012R2 sources.
In a new installed Windows server 2012R2, I can see that the KB is installed.
But on the WSUS report of this server, the status of the KB included in the install.wim by DISM displayed as "Not applicable".
Is it because WSUS did not installed it itself ?
Is there a way to display it as "installed" in the report, even if the patch had not been installed by the WSUS server ?
Thanks
ML

But on the WSUS report of this server, the status of the KB included in the install.wim by DISM displayed as "Not applicable".
Very possible, and likely.
It depends on how the detection logic of the update has been written. In some cases, detection logic is based on what an installer does during installation, e.g. create and/or set a registry key or value. This may not happen when injecting an update into
an image using DISM. As a result, the detection logic will not see the necessary flags it's looking for to determine that an update is "Installed" vs "Not Applicable".
You also have to think of this in terms of the baseline image installed on the system. To be true, a baseline image that already has the necessary content is, in fact, "Not Applicable", and has, in fact, not actually been installed to that machine.
Most often you see this in the realm of installing images with slipstreamed service packs.
Consider a scenario with a slipstreamed Win7SP1 baseline. Functionally speaking, all previous updates are contained within that SP1 baseline, but if you inspect the state of the actual updates in WSUS, they will all be listed as Not Applicable. They're not
actually "installed", and they cannot be installed, thus the only viable remaining state is "Not Applicable", which is true -- because they cannot be installed on an SP1-based machine. (Functionally they are superseded, which is also a
contributing factor to the state of "Not Applicable".)
There is no way to display it as "Installed". It's not. This is something that should be documented in the declaration of the baseline image you're using (by patching up the image with DISM once every six months).
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

ISE application server not running

Hi Team,
My ISE appliance application server not running, even reboot still the same, any reason?
ISE-3315-K9
Displaying ISE application status ....
ISE Database listener is running, PID: 6270
ISE Database is running, number of processes: 17
ISE Application Server process is not running.
ISE Profiler DB is not running
ISE M&T Session Database is not running.
ISE M&T Log Collector is not running.
ISE M&T Log Processor is not running.
I saw suspicious from logs, anyone experience this before? I coudn't find this ise ErrorCode: -999 from the Cisco KE database.
2015-01-19T15:45:47.371651+11:00 ISE1 ADE-SERVICE[2742]: [9862]:[error] application:operation ci_util.c[597] [marcellus]: Problem executing init script (/opt/CSCOcpm/bin/cpmcontrol.sh) err = 1
2015-01-19T15:45:47.371671+11:00 ISE1 ADE-SERVICE[2742]: [9862]:[error] application:operation cars_install.c[1931] [marcellus]: App (ise) has trouble executing <init> tag
2015-01-19T15:45:47.377124+11:00 ISE1 ADEOSShell[9862]: ADEAUDIT 3015, type=APP INIT, name=Error during application init, username=marcellus, cause=(null), adminipaddress=10.0.10.7, interface=CLI, detai
l=Application (ise) has trouble executing <init> tag
2015-01-19T15:45:47.377333+11:00 ISE1 ADE-SERVICE[2742]: [9862]:[error] application:operation install_cli.c[419] [marcellus]: Error while starting application - Application: ise ErrorCode: -999

Hi Neno,
Thanks for replying, this is it.
Displaying ISE version ...
Cisco Identity Services Engine
Version : 1.2.0.899
Build Date : Wed 24 Jul 2013 17:37:31 EST
Install Date : Wed 01 Oct 2014 12:33:32 EST

[ISE] Posture Status - Not applicable

Similar Messages

Maybe you are looking for