ISE PSN rebooted and will not rejoin distributed deployment

Hi,
A PSN was powered down by accident and I'm trying to register it back to its PAN as part of a distributed deployment but I keep getting the error message "ISE not in Standalone mode".
I'm not sure how to set the PSN node back to Standalone mode when it's no longer part of the deployment.
Thanks for any help.
Barry

Hi,
Yes Deregister the PSN from the PAN after deregistration this node become Standalone node.

Similar Messages

  • HT201210 My ipad mini is stuck in a continues reboot and will not turn on or shut off. What can I do.

    My Ipad mini was in the middle of an update for the Pintrest app when the upload froze. I tried shutting down the ipad and that seemed to cause it to go into a constant reboot. Now the ipad will not turn on or shut off. Only display the apple sign. Are the any self fix remedies out there to fix this?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Iphone 3gs keeps rebooting and will not restore

    hi
    i got an iphone 3gs
    randomly today i was in the middle of a phone call and its just rebooted itself and would not stop rebooting itself until i manually turned it off.  got home, set it in recovery mode and it went through the whole iphone recovery process.  right at the very end it came up with "iphone "iphone" could not be restored error(-1)
    i cant find out what it means on the internet so i was wondering if you could help me  i did the whole restart computer, change usb etc process and still not recovering
    HELP

    (-1)  it basically is the iphone "iphone" canot be restored due to an unknown error (-1)

  • HT201263 iPhone 4 stuck in reboot and will not restore from iTunes

    My iPhone 4 started having a severe battery drain. Today when it went dead, I charged it and received a message to plug it into iTunes to restore. I'm not stuck in a reboot loop and keep getting errors in iTunes such as 1602 and 2001 when I try to restore it. Any suggestions?

    Disable the security software on the computer temporarily.
    Connect the device and update it.

  • After downloading an update, firefox says "your computer must be restarted to complete a previous upgrade of firefox. do you want to reboot now" and will not start.

    Firefox will not start, or allow windows xp to uninstall the program. When I attempt to start the program, firefox says "your computer must be restarted to complete a previous upgrade of firefox. do you want to reboot now? It gives the same message after rebooting, and will not start, or uninstall. I also downloaded it again, same thing.
    == This happened ==
    Every time Firefox opened
    == I downloaded an update.

    Follow '''''cor-el's''''' advice in this post:
    https://support.mozilla.com/en-US/forum/1/606173

  • Laptop computer frozen and trying to reboot but will not. How can I quit and restart?

    How do I restart a computer that is frozen and tries to reboot and will not do anything else? Is there a way to shut it down to restart. I thought I remember there were some keys to shut down and restart.
    We have disconnected the power and any external devics and no CD.

    Press down on the Power button and hold it down for 5-10 seconds until the computer shuts down.

  • My phone 5s did the new update and will not come back on. I already tried hard reboot still won't work. Been over a hour now. Please someone help I need my phone.

    My phone 5s 16gb gold did the new update and will not come back on. I already tried hard reboot still won't work. Been over a hour now. Please someone help I need my phone.   This phone is not even 6 months old been in case no scratches. This is driving me crazy.

    Connect your phone to a computer and restore your software using iTunes.

  • Help! After interrupting an installation of a program downloaded from the internet on my mac in a reboot cycle will not start, I've already done the disk check and it's ok and I reinstalled the OS 10.8 Lion

    After interrupting an installation of a program downloaded from the internet on my mac in a reboot cycle will not start, I've already done the disk check and it's ok and I reinstalled the OS 10.8 Lion

    In this case, I think that there's something damaged that can't be fixed just reinstalling OS X.
    If you don't want to lose files, you will have to create a second partition in the hard drive and install OS X there, so you will be able to recover everything you need. Then, you will have to erase the first partition and reinstall OS X. Follow these steps:
    1. Hold Command and R keys while your Mac is starting to start into OS X Recovery, and open Disk Utility.
    2. You can follow the steps of this site to create a second partition > http://pondini.org/OSX/DU3.html
    3. After creating the second partition, close Disk Utility and install OS X on the second partition.
    4. When the installation finishes, open Finder and, in the sidebar, you will see the other partition. Open it and recover the files you need.
    5. After doing that, repeat the step 1.
    6. Select “Macintosh HD” in the sidebar, go to Erase tab and erase the disk.
    7. Close Disk Utility and install OS X on the first partition.
    After doing all of these steps (you will need a lot of time to do this), you can delete the second partition you created and add the size of this partition into the first one > http://pondini.org/OSX/DU4.html

  • My iMac (10.6.8) goes to sleep and will not wake up without a hard reboot.

    My iMac (10.6.8) goes to sleep after 2 or 3 hours (even if im working at the time) and will not wake up without a hard reboot. 
    Any suggestions would be very much appreciated.

    What all USB or Firewire devices do you have connected?
    Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if sleep/wake works OK in Safe Mode.
    Reboot & test.
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.
    next...
    Intel-based Macs: Resetting the System Management Controller (SMC)...
    http://support.apple.com/kb/HT3964

  • My Ipad2 just shuts down and will not turn on. Rebooting does not help. He switched on when I start charging it. In this case, the battery is charged.

    My Ipad2 just shuts down and will not turn on. Rebooting does not help. He switched on when I start charging it. In this case, the battery is charged.

    Standard troubleshooting steps in the following order:
    1. Reset: Press the sleep/wake button & home button at the same time, keep pressing until you see the apple logo, then release. Ignore the slide to power off.
    If no change, continue:
    2. Restore your phone from a backup, note: if the problem is related to corrupt data, while this will restore a fresh OS, it will also restore the problem.
    If no change, continue:
    3. Restore as a "new" phone in itunes & re-sync your content. All saved data will be lost.
    If no change, make an appointment at an Apple store.

  • HT1414 Daughter's screen is black and will not reboot or come on

    Daughter's screen went black and will not reboot what do we do

    Restore the iOS without restoriing a backup
    Use iTunes to restore your iOS device to factory settings
    Note that if the phone was ever jailbroken, this may not work.

  • My iMac 27" screen is black and will not start. The computer is making noise and beeps when i use the keyboard but I can't see anything. I have rebooted with no success

    My iMac 27" screen is black and will not start. The computer is making noise and beeps when i use the keyboard but I can't see anything. I have rebooted with no success

    Have a look at these. And please say what OS you have.
    http://support.apple.com/kb/ts1411
    http://support.apple.com/kb/ts1367

  • I have an ipad 2 32Gb wifi which I bought yesterday and it constantly crashes and will not reboot. Does anyone have a solution or is this a straight exchange??

    Hi
    I bought an IPAD 2 32GB wifi yesterday and was looking forward to using this. But it constantly crashes and will not reboot. Has anyone else had this problem and was there a solution? if not is this a straight return to the store and money back????

    Hi thanks for your advice, but i tried the reboot as you suggested and this does not work and the iPad now seems completely unresponsive. DesLite having a full charge I can not get any sign of life from the iPad.

  • Ipad frozen in off/on loop and will not reboot

    ipad frozen in off/on loop and will not reboot, tried accessing itunes but needs my code on the ipad which is frozen

    I Found a solution:
    this requires itunes, first plug the charger cable into the computer, then hold the home button on the iPad and plug the cable into the iPad, you should see the iTunes logo on the iPad. You will then receive prompts to restore. This assumes you backed up the device to iCloud prior to the problem.

  • I dont know why, but my Messages wont work on my Macbook any more. It has signed me out and will not allow me to sing back in. Any ideas?

    Recently, my Messages app automatically signed me out and will not let me sign in again. I have tried everything. I can no longer send Imessages using my Macbook. How do I reset this thing?

    This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
    Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
    Step 1
    Check the status of the service. If the service is down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
    Step 2
    Sign out of iMessage on all your Apple devices. Log out and log back in. Try again to sign in.
    Step 3
    Restart your broadband device and your router, if different. You may have to skip this step if you don't control those devices.
    Step 4
    From the menu bar, select
     ▹ About This Mac
    Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected.
    Step 5
    Take the steps suggested in this support article. If you don't understand some of the steps or can't carry them out, ask for guidance.
    Step 6
    From the menu bar, select
     ▹ System Preferences ▹ Network
    If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If the box marked SOCKS Proxy is checked, uncheck it. You don’t need to change any other settings in the window. Click OK and then Apply. Test.
    The result may be that you can't connect to the Internet at all. Revert the change if that happens, or if iMessage still doesn't work. Remember that you must Apply any changes you make in the preference pane before they take effect.
    Step 7
    Select from the menu bar
     ▹ System Preferences… ▹ Flash Player ▹ Storage
    and click
    Block all sites from storing information on this computer
    Close the preference pane.
    Step 8
    Make sure you know the ID and password you use with iMessage. Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Use the search box in the toolbar of the Keychain Access window to find and delete all items with "iMessage" in the name. Log out and log back in.
    Step 9
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    If iMessage worked in the guest account, stop here and post your results.
    Step 10
    Boot in safe mode and log in. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. After testing, reboot as usual (i.e., not in safe mode) and test again.
    If iMessage worked in safe mode, but didn't work when you booted out of safe mode, stop here and post your results.
    Step 11
    Reset the NVRAM.
    Step 12
    Reinstall OS X.
    Step 13
    If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support.

Maybe you are looking for

  • CS6 Photo merge error 1 error

    Hi, Trying to use the following in Automate all fail with the same error codes: Lens Correction Merge to HDR Photomerge all have this error; I have tried to change CS6 Preferences/Performance to allow more memory etc but that didnt help. Restarting d

  • Portlet could not be contacted

    Hello! Has anybody experinced this problem: we have the following: Server A, Windows 2000,2GB RAM, 9ias(9.0.2.0.0) [ infrastrcture, Portal, J2ee container, webcashe  ] Server B, Database Oracle 9i when accessing a portal page through Webcashe over SS

  • Can anyone help me find the solution - JFrame problem?

    HI, I have developed an application using JFrames; instantiating a new frame to display each new screen of the application as the user moves from screen to screen and back. However when I move from screen1 to screen2 then back to screen1 and back to

  • Setting reports_path

    Can someone please tell me the steps to set up reports_path in em reports.sh. Also, is there a way to configure in em rwserver.conf.

  • How much effort in upgrading mid-size app from WorkShop 8.1 to 9.2.2?

    Hi all, We have a mid/large size J2EE app built using WorkShop 8.1 SP5 that we are now thinking of migrating to 9.2.2. Our application uses most 8.1 features like pageflows/netui/controls/schema projects/ejbs etc, and can be considered relatively mid