ISE reimage to 1.2, cant load install software

Hello
We have some ISE 3355 servers ready to configure, out of the box, and we want to upgrade them to version 1.2 before configuring them. I got the iso image for 1.2 but Im having problems with the reimage process.
I have been able to run the reimage process on 2 out of 4 devices, but at this moment, the reimage process gets stuck after I choose the boot optios trying to load the initrd.img file...
boot: 1
loading vmlinuz.............................................................
Loading initrd.img..........................................................
Did have the same problem with the second device, but after letting it start all the way down without booting with the dvd and running the setup program, I was able to reboot, boot from the ISE 1.2 dvd and load the reimage process...
Am I doing something wrong?... the reimage link doesnt provide any help... and its the same thing I´ve been doing...
http://www.cisco.com/en/US/docs/security/ise/1.2/installation_guide/ise_installing_on_NAC-AC.html#wp1197454
Any help is much appreciated!

Hello Alejandro
If you do not have access to this DVD, you can download the Cisco ISE Release 1.2 software
from the Cisco Software Download Site at:
http://www.cisco.com/public/sw-center/index.shtml.
You will be required to provide your Cisco.com credentials.
When the Cisco Identity Services Engine ISE VM Appliance (ISE Software Version 1.2.0.xxx) DVD
boots, the console displays:
Welcome to Cisco ISE
To boot from the hard disk press
Available boot options:
[1] Cisco Identity Services Engine Installation (Monitor/Keyboard)
[2] Cisco Identity Services Engine Installation (Serial Console)
[3] Reset Administrator Password (Keyboard/Monitor)
[4] Reset Administrator Password (Serial Console)
Boot from hard disk
Please enter boot option and press .
boot: 1
You can choose either the monitor and keyboard port, or the console port to perform the initial setup.
At the system prompt, type 1 to choose a monitor and keyboard port, or type 2 to choose a console port,
and press Enter.
This starts the installation of the Cisco ISE software on the VMware system.
For more information this link will definitely be helpful to you.
http://www.cisco.com/en/US/docs/security/ise/1.2/upgrade_guide/b_ise_upgrade_guide_chapter_01.html

Similar Messages

Cant load printer software

i have a epson cx 4600, in pass printer worked fine, lately i was have a few glitches with os 10.4.9, so i re installed system soft ware back to 10.3.9 ever since i cant load printer i install software from original dick it installs fine , but when i go to set up new printer through printer utility the utility goes to open then closes. I tried this several times i even re-re-installed sytem software but still nothing. i even downloaded printer utility program that was posted on this forum but nothing. i need help. my next option is to get a new printer which i really dont want to do.

Hi Myron!
Try this procedure.
* Download the most current driver from Epson Stylus CX4600, Drivers & Downloads. Printer Driver v2.0cA for Macintosh OS X (v10.2.x - 10.3.x).
* Before moving the folder & files listed below, to a Temporary Epson Trash Folder, that you should create on the Desktop, open Printer Setup Utility, and delete the CX4600.
* Quit Printer Setup Utility
* If present, move the files (Posted in CAPITALIZED Italics), to the newly created Temporary Epson Trash Folder
HD > Applications >
EPSON PRINTER UTILITY (Alias)
HD > Users > Your Home > Library > Preferences >
COM.EPSON.IJPRINTER.UTILITY.PLIST
COM.APPLE.PRINT.CUSTOMPRESETS.PLIST
COM.APPLE.PRINT.PRINTCENTER.PLIST
COM.APPLE.PRINT.PRINTERPROXY.INTERNAL_MODEM.PLIST
COM.APPLE.PRINT.PRINTINGPREFS.PLIST
HD > Library > Printers >
EPSON (Folder) Only move this folder if you have no other
Epson products
I also had a Epson OS X booklet.pdf, that I had saved in my Documents folder. You will get a new one. After the installation, I replaced it. You may not have saved your original one. It's no big deal, there's really not much in it, In fact I don't remember the last time I opened it!
* Quit ALL running Applications
* Repair Permissions using Disk Utility in the Utilities folder
* Dig out your Epson CX4600 Start Here instruction quick sheet, for reference
* Unplug the USB cable from the Mac & then from the CX4600
* Re-attach the USB cable to the CX4600 & then to the Mac
* Turn on your CX4600
* Open the epson11111 folder
* Double-click the .dmg file to create a disk image with the product name on your desktop
* Open the disk image
* Follow the prompts & instructions
* When the Vise installer opens in a window, double click it to start the install
* When the installation is complete, turn off the printer & restart your Mac.
* Repair Permisions again
* Turn on the CX4600
* Open Printer Setup Utility
* You have no printers available will appear. Click Add
* Select Epson USB in the contextual menu
* Click on CX4600 to highlight
* Add Page Setup: select All, from the contextual menu
* Click Add
* Quit Printer Setup Utility
The images that are left on the Desktop, can be trashed, unless you prefer to keep the installer.
Good Luck!
ali b

Cant't install software on my Mac Pro Retina Display with 10.8.1 Mountain Lion

I can't seem to install anything anymore on my Macbook Pro with retina display (OS X 10.8.1 Mountain Lion)
I am getting the following during an attempt at an install of Paragon NTFS:
Sep 14 11:41:12 eurig-mac.local WindowServer[99]: CGXSetWindowListAlpha: Invalid window 0
Sep 14 11:41:13 eurig-mac.local Dock[158]: CGSReleaseWindowList: called with 4 invalid window(s)
Sep 14 11:41:13 eurig-mac.local CoreServicesUIAgent[426]: Error: qtn_file_apply_to_path error: Read-only file system
Sep 14 11:41:15 eurig-mac com.apple.launchd.peruser.501[145] ([0x0-0x46046].com.paragon-software.filesystems.Installer[432]): Exited with code: 127
Hope someone can help!
Thanks

Ok, I feel stupid. I just had to adjust the resolution and it's fine. Sorry to bother everyone!

WHY CANT I INSTALL ADOBEFLASH FOR FV@ AND YOVILLE ZUNGY GAMES

I am not knowledgeable on pc of lt I CAN NOT GET YOVILLE TO LOAD IT NEEDS ADOBE? I NEED NEWEST VERSION ON FARMVILLE 2 BUT CANT LOAD THE VERISION EITHER ZYNGA GAMES HELP PLEASE

Hello,
Thanks for letting us know about your problem. You can get YOVILLE and FARMVILLE 2 to be load by installing Adobe Flash Player. For getting instruction on installing adobe flash player, you can see this article [[Install the Flash plugin to view videos, animations and games]]

I cant load i tunes on my windows 8 64 bit computer

after sveral attempts cant load i tunes in windows 8 any help please

We might be able to help, but not without first knowing specifically what is occurring and why iTunes is not installing.
Are there any error messages?

Cant load nef files to elements organiser only accepts jpg??

Do i use back up, export or copy/move .

Brilliant clarity
thanks
Brian
PS: you can get the converter programmes but long term not a good idea i think      as a hassle!!
Date: Fri, 17 Jan 2014 06:24:32 -0800
From: [email protected]
To: [email protected]
Subject: Cant load nef files to elements organiser only accepts jpg??
    Re: Cant load nef files to elements organiser only accepts jpg??
    created by Little_Pale_Face in Photoshop Elements - View the full discussion
Hi,
The D7100 requires ACR 7.4 to read the NEF files.
You would need Photoshop Elements 11 to be able to install that ACR or version 12 which has it in already
You could get Lightroom but if you do any manipulation of images using layers and the like, you might still need an editor like the Elements editor. Lightroom doesn't have facial recognition if you use that facility.
Brian
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6023020#6023020
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6023020#6023020
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6023020#6023020. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Photoshop Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Cant load LLVMSupport

hi, i have a problem, i installed llvm and clang, now i wrote a program which uses llvm and when i want to compile i get the errror:
cant load LLVMSupport (cannot open shared object file)
whene can i find the llvm lib and how to add it to path?

It would probably help if you posted your code so others can try to compile it.

MOVED: Cant load networking driver for neo 2 plat

This topic has been moved to AMD64 nVidia Based board.
Cant load networking driver for neo 2 plat

1. Put your Windows CD in the drive.
2. Select Install Windows.
3. Let install continue.
4. After the first restart, you will see something about Recovery Console. Do NOT select this option. Just let setup continue.
5. You will soon see a message "searching for existing Windows installation".
6. Soon after, you will be given the option to REPAIR that installation or make a new installation.
7. Select REPAIR.
8. Just keep going.
That's it. Hopefully things will be just fine after the repair is done.

648MAX - cant load scsi drivers

just bought the MS 6585 and i cant load in the drivers for my LSI DC-390 Tekram scsi card.
Running XP Pro with a intel 2.26 processor.
Have flashed the card with new flash and works fine in other machine.
any help would be great

sand_man wrote:You might need to remove the whole folder and reinstall oss (it will run the install script again) I think the folder is /usr/lib/oss/
I do it, but a sound is beginning to ring from left column. For testing I restart computer to windows and there're sound is ringing from couple columns and not from once only.
I restarted Linux and sound was played already from all two columns. After sometimes a bug was repeated. Generally I use winxp and never watch that "bug" there.
Last edited by veranyon (2010-01-11 16:38:30)

Cant load 5.0

Cant load 5.0 keeps saying it takes too long

This shows up a lot with windows users. Either your firewall or your security system is blocking one of the ports. Turn those off, do the install, then turn them back on again.

I have a macbook purchased in dec 2009 with OS 10.6.8, i can't install Mavericks as it is not finding any place to install. It says it cant be install on the harddrive and i dont have any other option to select .. what to do?

i have a macbook purchased in dec 2009 with OS 10.6.8, i can't install Mavericks as it is not finding any place to install. It says it cant be install on the harddrive and i dont have any other option to select .. what to do?

imnyaar wrote:
... It says it cant be install on the harddrive
What does the message say, exactly?
Try this:
From the Finder's Go menu, choose Computer:
Double-click your hard disk icon. It is usually named "Macintosh HD":
Look for this folder:
If it appears in that window, drag it to the Trash.

Install software for Deskjet 2540 will not load on Windows XP Home edition SP3 machine

I have successfully connected a new Deskjet 2540 printer to a Windows 7 machine, and IPAD Air, and an XP Pro laptop.
I cannot get the install software to load on and XP Home edition SP3 machine. I have tried all of the HP remedies that I can find, over period of two days, but the installation fails every time with the message "Installation failed. The software required for your printer could not be installed".
What can be done?

Hi,
Thanks for your second installment of help suggestions.
I started check disk as you proposed and it ran happily for some hours with evidence of progress. However eventually I found the computer stopped with a number of suggestions for restarting. I tried all of these and some others, but got no further than the first Windows picture. At this point the machine restarts, and goes through the same process.
The printer problem, as you can see has unfortunately become secondary to trying to recover the system.
What I propose is to try to read the disc in question on another computer, and extract the important data files to a safe place. Then to return the disc to its own machine and use the recovery CD, to try to get the machine to recover with the minimum of loss. If this succeeds, I might even find that the printer software then loads without problem. There is a big IF there, and I won't hold my breath.
None of this relates to the printer problem, and fortunately i have three other devices running which are happily connected to the printer.
I just wnted to explain why there will be no further feedback for a while. I will take my time with the recovery process.
Thanks for all of your help. I have just been unlucky.
Regards

I Mini with an i7 processor. I would like to use Boot Camp to install windows based CAD software on my MAC. Would it be better to use a plugin external hard drive to load my software on and if so what hard drive would you recommend?

I Mini with an i7 processor. I would like to use Boot Camp to install windows based CAD software on my MAC. Would it be better to use a plugin external hard drive to load my software on and if so what hard drive would you recommend?

Thank you for your quick response. I can then use a ZIP drive for data storage. I want to keep as much of my hard drive free of data as possible.

Snow leopard 10.6.8 wifi connected, cant load webpages

hi!
just yesterday my computer showed this problem with the internet. as the title says, it is connected to the wifi network (as it has always been) but i face the following problems:
i cant load new webpaged in google chrome and firefox (which are the ones that I actually use)
i can load webpsged that were already saved as bookmarks.
i can load webpages in safari
my icon for dropbox shows a red cross icon
utorrent works just fine
outlook (the software) get's my new emails
what i tried to solve it:
checked that my wifi networks work perfectly fine with other devices in the house
restart computer
changed DNS to one that was suggested in another thread in this discussions site
resetting NVRAM/PRAM
checked that it is updated
so, i read that some people had similar problems with the new 10.8.2 for mountain lion, or sth like that... but in my case i have snow leopard so i don't think thst's the problem

Hi, this has worked for a few...
Though all of these steps may or may not be needed, I'm including them all.
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.

HT5628 why cant i install windows 8 on a macbook air 13-inch, Late 2010?

why cant i install windows 8 on a macbook air 13-inch, Late 2010?

Welcome to the Apple Support Communities
You can install Windows 8 on your computer because it can run Windows 8, but you can't install the Windows support software that makes Windows run properly, so probably things like the Wi-Fi card, the sound and the graphic card may not work without these drivers.
That's just an Apple restriction. Apple has decided to give Windows 8 support to the most recent Macs, leaving old Macs with Windows 7. Unfortunately, to run Windows 8 properly, the only option is to install it on a virtual machine. Apart from that, if you want to install Windows 7 with Boot Camp, you can do it

ISE reimage to 1.2, cant load install software

Similar Messages

Maybe you are looking for