ISE Reports notification

I’m generating scheduled reports to get Guest Activity sent to an FTP repository every hour.
The dialog box to schedule, includes a field to indicate an email where a notification should be sent.
I can get the report on the FTP repository as expected but any email is sent to the address indicated in the dialog box.
I know the SMTP server is configured and running ok because when an sponsor creates a guest account the password is properly sent.
So I think , the notification does not work or I’m missing something.
Another issue is when a report is exported, a pop-up is displayed indicating an email with instructions will be sent. I don’t know who should this email be sent to. Is it possible to configure the destination somewhere?
The ISE version is 1.2.0.899 (patch 4)
Anyone can give me an advise or assistance.
Regards
Daniel Escalante

Thank you Charles.
I wonder which version are you running? Or maybe you have the exception indicated below, set in your server.
TAC confirmed a bug with the reported issue CSCul76201.
https://tools.cisco.com/bugsearch/bug/CSCul76201/?reffering_site=dumpcr
When ISE is configured for an email notification to be sent when a scheduled report is generated, the source email address of the report notification mail is always "root@<ise_hostname>". Some production email servers might reject such source address and exceptions need to be created on the email servers.
This is why we are unable to receive the email notification that has been sent by ISE.
Regards.
Daniel Escalante

Similar Messages

  • ISE Reporting

    Hello
    Is it possible to configure an email notification to send reporting on ISE 1.1.1 ?
    Regards

    It is not possible to configure an email notification to send reporting on ISE 1.1.1, however you can you can send email notification for alarms generated using the following method:
    Configuring Email Settings
    This section shows you how to specify the address of the email server and the name that is displayed for this address. This address is used for sending and receiving log messages.
    Note  Depending upon the roles assigned to your account, you may or may not be able to perform the operations or see the options described in the following procedure. For more information, see Understanding the Impact of Roles and Admin Groups.
    To specify email settings for the mail server, complete the following steps:
    Step 1  Select Administration > System > Settings
    Step 2  In the left-hand Settings panel, expand Monitoring and then choose Email Settings.
    Step 3  In the Mail Server field, enter the hostname or IPV4 address of the outgoing SMTP mail server. This information is required to send email notifications for alarms.
    Note  A hostname requires a format such as mailman.cisco.com. An IPv4 address requires a format such as, 192.168.1.1.
    Step 4  Enter a name or email address (such as [email protected]) in the Mail From field. This name or email address is what users see when they receive a message from the mail server.
    Step 5  Click Submit.

  • Internet Expenses R12 expense report notification due date change

    Hi Gurus,
    R12-IExpenses
    Please let me know can we change the due date displayed along the right side of the notification of an Expense report submitted by an Employee in I Expenses?
    Is there a setup for that?
    Also could you say if there is any out of the box feature to send reminder notification to the approver after certain days of inactivity?
    Thanks,
    Sayan

    The due date for the notification is controlled by the timeout property on WF definition, you have to open the WF, find the notification and edit it.
    Being R12 this likely uses AME, which has the default behavior or escalating to the next person on the hierarchy once a notification times out. You would need to edit the WF to implement the reminder via a loop with an exit condition. I think the PO (Req and/or PO approval) ones have that, you might use those as a reference.

  • ISE reporting problem

    Hi all,
    I currently have 3 ISE servers running 1.2.1.198  - 
    ISE1 - primary admin, secondary monitoring, PSN
    ISE2 - primary monitoring, secondary admin, PSN
    ISE3 - PSN only.  
    A pair of 5508 controllers are located on the same campus as ISE1 and ISE2 and the WLC config points to these as Radius authentication servers. The ISE3 node is remote and is not identified as an authentication server.  Rather, it is defined as an AAA server in a FlexConnect group on the WLC, and all APs at the site where ISE3 is located are part of that FlexConnect group.  The idea here is that if there is a WAN outage at the remote site users will still be able to authenticate.
    Without going into too much detail, to test this,
    Using ACLs on an intermediate firewall, I isolated an AP from the 5508 and from ISE1 & ISE2
    I isolated ISE3 from ISE1 & ISE2
    I connected to the isolated AP and authenticated
    This works as expected and the wireless client connects and authenticates successfully.   I captured traffic on the wire and this verifies that the isolated AP authenticated to ISE3.
    Now I remove all ACLs and allow ISE3 to communicate with ISE1 & ISE2 again.  But now when I go to Operations => Authentications on ISE1 I see no evidence of the user authentication to ISE3.  And I can’t find any report that details the authentications that took place on ISE3.  The only evidence that I see that ISE3 performed any authentications is on the Home page, under System Summary, I see a couple of ticks under Authentication Latency during my test window.  Is there any way to get any details on these authentications, or to report on authentications by PSN?
    Thanks,
    -Jeff

    Are you using a microsoft CA server? If so are you copying and pasting the output of the CSR using RDP over to the CA? I hit the same issue before and as a workaround i ftp'd the csr file to the CA and copied and pasted it there and generated the cert. (I had to do this since I run a macbook and I can hit the CA page using Mozilla).

  • BASIC: Flat File Uploads to Web Reports - Notification Status

    Hi,
    I have excel based Notifications (Some legal cases) with their status in text format.
    I would like to show them on a WAD based report.
    Kindly suggest how I can do the same.
    Thanks in advance
    Pranab

    Pranab,
    you could upload them as documents if required and display the same.
    Otherwise - you can upload the same into MIME repository and use the template to display the same using the document Web Item.
    Otherwise you can have a BSP that uploads the data into MIME - the user could do this and then display the same in a BSP page instead.
    If security is not a big concern then you could upload the same into sites like zohocreator and expose the links on the web template - here the user can also update the status / change the excel files if required - something like Google spreadsheets..
    Arun
    Assign points if useful

  • Wrong DATE-TIME FORMAT among REPORTS NOTIFICATION EMAILs

    Dear all,
    I create a report request with url
    https://ocixxxx2.oci.xxcl.net/reports/rwservlet?>destype=printer&desformat=PDF&server=rep_xxxxx2_orahome&userid=ixxxxxx/xxxxxxx@saas&notifysuccess=IASL&notifyfailure=IASL&report=R1000R13.rdf&jobname=R1000R13&desname=HPLaserJet4150PCL6
    Email notification was generated with wrong date format .
    It's expected to be in UK English but it shows encoded text , may be random. I route it to another email servers such that find the date time is in chinese characters . That caused problem on original email server in which was not supported
    Could any expert please advice ?
    Warmly
    Edited by: MosielleKwan on 2010年2月26日 下午11:31

    It's indeed an expected behavior.
    When a Reports Server starts on a Windows machine, it likely detect the Windows Regional Settings in order to use it when needed later. This let the Reports Server communicate in the same format/way the Server machine uses. For example, if the System / Application Server administrator prefers to use the Windows (on which the Application Server is installed) with Chinese Regional Options, it is normal that the Reports Server send the Notification Email with a "Date/Time" Format matches the Windows.
    Thence, you like to get English/Western Date and Time format in the Reports Server Notification Email, it is required to change the Windows Regional Settings from Chinese to English and restart the Reports Server and restart the corresponding compoent. This will let the Reports Server detect the change and will send the Notification Email(s) then with English/Western Date and Time formats.
    If English/Western Date and Time format in the Reports Server Notification Email but still have the Windows Regional Settings set to Chinese, you can implement it
    that :-
    1. Change the Windows Regional Settings from Chinese to English.
    2. Restart the Reports Server and restart others.
    3. Change the Windows Regional Settings back from English to Chinese. .
    With these 3 steps, the Reports Server will keep sending the Notification Emails with English/Western Date and Time format, and maintain original settings.

  • How  to test reports notification for iStore

    Hi,
    In notification manager,i have seen below notification events.
    Reports - iStore Historical Summary
    Reports - iStore Top Orders
    how I can test these report and the output of these reports.

    Hi kalyani,
    I am pretty clear with what you want.
    The output on screen after report execution usually prints some values on screen, which are really CANNOT be captured by GETGUI ,
    there are several ways to automate this, in case some changes can be dont to report.
    1.Make changes in your report in such way that selction options are replaced by parameters of ecatt (Here you have to pass values from ecatt) and you have to call your code within ABAP ...ENDABAP.
    2.Make changes to report so that it returns you the success or failure in form of a status message in the status bar , this can be captured in eCATT within MESSAGE..ENDMESSAGE .By doing this, after each execution of report with different inputs,Status message will tell me the results of execution.
    3.In case report is making some database commits then please execute the report and check for database changes after report execution for results to ensure success or failure.
    i hope this helped you
    regards
    vinay

  • ISE reports. Need report for Authorization Profiles

    in ISE 1.1.1 pack 2 how do I run a report that will give me all authorizations with the blackhole_wireless_access for the past 2 months?
    TIA
    Scott

    Operations -- report / Catologs -- AAA protocols -- Radius Authenitications -- Run and Query
    narrow down focus as best you can.  for instance by device name. and specify time range.  (note DB rewrites)
    then export to CSV.  Select the Identity_Store and Authorization_Policy along with user, times, etc.
    Sort CSV by empty identity_store or default Authorization_Policy (default).
    Thanks Justin @TAC
    Scott

  • Report notification to users

    Can reports notify you when it has been completed or a group of users. Please respond directly to my email if possible. [email protected]

    From your note we discovered this wasn't documented anywhere (oops! this will be fixed!), but Reports 6i has two command line arguments:
    notifysuccess=<emailaddr>
    notifyfailure=<emailaddr>which send e-mail when the report runs successfully or fails with an error.
    There have to be corresponding entries in the Reports server configuration file, which are the e-mail message templates that reports will use when it sends mail:
    succnote=<filename>
    failnote=<filename>Substitution tokens can be put in these e-mail templates - valid tokens include:
    &JobName
    &TimeFinished
    &ErrorString
    &ServerNameThese tokens will be substituted with values by the Reports Server.
    Regards,
    The Oracle Reports Team --skw
    null

  • ISE : Generate automatically a report every month

    Hello,
    We have ISE at work and I would like to know if it is possible to automate the execution of the report : "Guest sponsor summary / 30 days) at the end of each month and save the result as csv file on a windows share ?
    Thank you in advance for your help.
    Christophe

    Hi,
    Scheduling and Saving ISE Reports
    You can customize a report and save the changes as a new report, or restore the default report settings.
    You can also customize and schedule ISE reports to run and re-run at specific time or time intervals. You can also send and receive email notifications once the reports are generated.
    Note You can save or schedule (customize) ISE reports only by using the Primary PAP nodes.
    Step 1 Run a report as described in Running and Viewing Reports.
    Step 2 Click Save As in the top right-hand corner of the report summary page.
    Step 3 Choose Report or Scheduled Report .
    Step 4 Enter the required details in the dialog box.
    Step 5 Click Save as New .
    You cannot schedule the following reports:
    Authentication Summary
    Health Summary
    RBACL Drop Summary
    Guest Sponsor summary
    End point Profile Changes
    Network Device Session Status

  • ISE 1.2 - Custome Reports

    Hi
    I can't find customer report in V1.2 - i want to create a report for posture that can show not only compliance state but also rules that matched or not as i configured all my posture rules in audit state and i want to create a detailed report , any idea ?

    Hi
    Cisco Identity Services Engine (ISE) reports are used with monitoring and troubleshooting features to analyze trends, and, monitor system performance and network activities from a central location.
    Step 1 Choose Operations > Reports > ISE Reports.
    Step 2 Click a report from the report categories available.
    Step 3 Select one or more filters to run a report. Each report has different filters available that are case sensitive, of which some are mandatory and some are optional.
    Step 4 Enter an appropriate value for the filters.
    Step 5 Run the report.
    For more information regarding configuration, please visit this link:
    http://www.cisco.com/en/US/docs/security/ise/1.2/user_guide/ise_report.html

  • User Notification Preference Update Report

    We have had our system ( Version R 12 ) in for about three months and everything has been working fine but now we are seeing this error come up
    The notification with the ID of 5207 experienced problems when attempting to dispatch an email notification to the role MARKWHIDDEN. Subsequently the notification preference for the following users has been set to DISABLED. Please correct the issue and re-enable their notification preference
    I have looked at the related Oracle notes but we just do not understand what they are trying to tell us to do.

    Please post the details of the application release, database version and OS.
    Please see these docs.
    Email Not Received javax.mail.SendFailedException: Invalid Addresses [ID 876835.1]
    Workflow Notification Mailer is Spamming the Email Accounts of Users [ID 1293792.1]
    Notification Id / Role are not Populated in the Update User Notification Preference Update Report Notification [ID 1330619.1]
    Oracle Workflow Documentation Updates for 11i.ATG_PF.H.delta.5 (RUP 5) [ID 412709.1]
    Thanks,
    Hussein

  • ISE failed to send Guest Email. Internal Error

    I'm having problems to send email when I create guest accounts. ISE reports "Internal Error encountered. Please contact administrator or help desk"
    How can I troubleshoot, what is going on?
    I'm running version 1.1.2.145
    Thanks in advance
    Daniel Escalante

    Check your SMTP Server Settings for Email Notifications
    To set the SMTP server, complete the following steps:
    Step 1 From the Cisco ISE Administrator interface, choose Administration > System > Settings > SMTP Server. The SMTP Server Settings page appears.
    Step 2 In the SMTP Server field, type the host name of the outbound SMTP server to which you need to deliver email. For the email notification to function appropriately, the SMTP host server must be accessible from the Cisco ISE server. The maximum length for this field is 60 characters.
    Step 3 Choose the Enable Notifications option to enable mail functionality globally.
    Step 4 Choose Use email address from Sponsor, to send guest notification email from the email address of the sponsor.
    Step 5 If you want to specify a different email address, choose Use Default email address and type the email address from which you want guest notification emails to be sent (for example, [email protected]).
    Step 6 Click Save.

  • Cisco ISE maillog

    Hi, I found some strange entries in ISE's system logs, using this command: show logging system maillog.
    Unfortunately  I wasn't able to find out what this means. Does anyone has an idea why this happens and which setting causes this? I see this entries for almost every hour.
    2014-09-01T08:01:01.731301+02:00 ISE's HOSTNAME sendmail[791]: s81611u6000791: from=root, size=511, class=0, nrcpts=1, msgid=<201409010601.s81611u6000791@ISE's HOSTNAME>, relay=root@localhost
    2014-09-01T08:01:01.739384+02:00 ISE's HOSTNAME sendmail[791]: s81611u6000791: to=root, ctladdr=root (0/0), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30511, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused
    Thanks!
    KR

    Hi Renata,
    Kindly check if the email configured to receive notifications from ISE is capable of receiving email notifications.
    ISE should provide a global option to configure the source address for scheduled report notification emails.
    When ISE is configured for an email notification to be sent when a scheduled report is generated, the source email address of the report notification mail is always "root@<ise_hostname>"
    If the production email servers reject such source email address, you get these error logs.
    However, you can create exceptions on the email server to allow the source address.
    Regards
    Salma

  • Error while executing Report migrated from 6i to 11g

    Hello,
    We have migrated forms & reports from 6i to 11g.
    Most of the reports work fine but we are having issue with very few reports.
    Let me explain the issue here:
    We have a Form that Runs a report.
    The Report has a PLL which loads a C library and calls a C Function. [using ORA_FFI]
    The C Function which is called has embedded SQL in it.
    The Report Server Engine crashes on encountering the first Executable SQL statement. [A Select or Insert]
    Need help to resolve this as we have tried a lot of things and not been successful.
    Below is a gist of the errors we see in teh Report server logs:
    "console~rep_test~1.log"
    Nov 14, 2012 7:37:11 AM com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl <init>
    WARNING: "IOP00410201: (COMM_FAILURE) Connection failure: socketType: IIOP_CLEAR_TEXT; hostname: 190.10.97.30; port: 57343"
    org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 201 completed: No
    at com.sun.corba.se.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:2200)
    at com.sun.corba.se.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:2221)
    at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:205)
    at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:218)
    at com.sun.corba.se.impl.transport.SocketOrChannelContactInfoImpl.createConnection(SocketOrChannelContactInfoImpl.java:101)
    at com.sun.corba.se.impl.protocol.CorbaClientRequestDispatcherImpl.beginRequest(CorbaClientRequestDispatcherImpl.java:152)
    at com.sun.corba.se.impl.protocol.CorbaClientDelegateImpl.request(CorbaClientDelegateImpl.java:118)
    at org.omg.CORBA.portable.ObjectImpl._request(ObjectImpl.java:431)
    at oracle.reports.engine._EngineClassStub.shutdown(_EngineClassStub.java:198)
    at oracle.reports.server.EngineManager.shutdownEngine(EngineManager.java:1748)
    at oracle.reports.server.JobManager.runJobInEngine(JobManager.java:1330)
    at oracle.reports.server.JobManager.runJobLocal(JobManager.java:2238)
    at oracle.reports.server.JobManager.dispatch(JobManager.java:1467)
    at oracle.reports.server.ConnectionImpl.runJob(ConnectionImpl.java:1537)
    at oracle.reports.server.ConnectionPOA._invoke(ConnectionPOA.java:460)
    at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:637)
    at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:189)
    at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1682)
    at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1540)
    at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:922)
    at com.sun.corba.se.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:181)
    at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:694)
    at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.dispatch(SocketOrChannelConnectionImpl.java:451)
    at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.doWork(SocketOrChannelConnectionImpl.java:1213)
    at com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.performWork(ThreadPoolImpl.java:471)
    at com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:500)
    Caused by: java.net.ConnectException: Connection refused
    at sun.nio.ch.Net.connect(Native Method)
    at sun.nio.ch.SocketChannelImpl.connect(SocketChannelImpl.java:500)
    at java.nio.channels.SocketChannel.open(SocketChannel.java:146)
    at com.sun.corba.se.impl.transport.DefaultSocketFactoryImpl.createSocket(DefaultSocketFactoryImpl.java:60)
    at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:188)
    ... 23 more
    ===============================================================================================================================
    "rwserver_diagnostic.log"
    [2012-11-14T07:37:10.969+01:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 12] [ecid: 0000Jf_MXxPFg4^kxS3j7k1GbGIR000003,0] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] EngineManager:updateEngineState Engine rwEng-0 status is 3
    [2012-11-14T07:37:10.969+01:00] [reports] [NOTIFICATION:16] [REP-56004] [oracle.reports.server] [tid: 12] [ecid: 0000Jf_MXxPFg4^kxS3j7k1GbGIR000003,0] EngineInfo:setState Engine rwEng-0 state is: Running
    [2012-11-14T07:37:11.294+01:00] [reports] [INCIDENT_ERROR] [REP-50125] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [URI: /reports/rwservlet/showjobs] REP-50125 : org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 208 completed: Maybe [[
    org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 208 completed: Maybe
    at com.sun.corba.se.impl.logging.ORBUtilSystemException.connectionAbort(ORBUtilSystemException.java:2400)
    at com.sun.corba.se.impl.logging.ORBUtilSystemException.connectionAbort(ORBUtilSystemException.java:2418)
    at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.readBits(SocketOrChannelConnectionImpl.java:354)
    at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.handleEvent(SocketOrChannelConnectionImpl.java:1124)
    at com.sun.corba.se.impl.transport.SelectorImpl.run(SelectorImpl.java:289)
    Caused by: org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 211 completed: No
    at com.sun.corba.se.impl.logging.ORBUtilSystemException.ioexceptionWhenReadingConnection(ORBUtilSystemException.java:2484)
    at com.sun.corba.se.impl.logging.ORBUtilSystemException.ioexceptionWhenReadingConnection(ORBUtilSystemException.java:2502)
    at com.sun.corba.se.impl.protocol.giopmsgheaders.MessageBase.readGIOPHeader(MessageBase.java:116)
    at com.sun.corba.se.impl.transport.CorbaContactInfoBase.createMessageMediator(CorbaContactInfoBase.java:150)
    at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.readBits(SocketOrChannelConnectionImpl.java:314)
    ... 2 more
    Caused by: java.io.IOException: End-of-stream
    at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.readFully(SocketOrChannelConnectionImpl.java:602)
    at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.read(SocketOrChannelConnectionImpl.java:521)
    at com.sun.corba.se.impl.protocol.giopmsgheaders.MessageBase.readGIOPHeader(MessageBase.java:112)
    ... 4 more
    [2012-11-14T07:37:11.296+01:00] [reports] [INCIDENT_ERROR] [REP-50125] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [URI: /reports/rwservlet/showjobs] REP-50125 : org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 201 completed: No [[
    org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 201 completed: No
    at com.sun.corba.se.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:2200)
    at com.sun.corba.se.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:2221)
    at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:205)
    at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:218)
    at com.sun.corba.se.impl.transport.SocketOrChannelContactInfoImpl.createConnection(SocketOrChannelContactInfoImpl.java:101)
    at com.sun.corba.se.impl.protocol.CorbaClientRequestDispatcherImpl.beginRequest(CorbaClientRequestDispatcherImpl.java:152)
    at com.sun.corba.se.impl.protocol.CorbaClientDelegateImpl.request(CorbaClientDelegateImpl.java:118)
    at org.omg.CORBA.portable.ObjectImpl._request(ObjectImpl.java:431)
    at oracle.reports.engine._EngineClassStub.shutdown(_EngineClassStub.java:198)
    at oracle.reports.server.EngineManager.shutdownEngine(EngineManager.java:1748)
    at oracle.reports.server.JobManager.runJobInEngine(JobManager.java:1330)
    at oracle.reports.server.JobManager.runJobLocal(JobManager.java:2238)
    at oracle.reports.server.JobManager.dispatch(JobManager.java:1467)
    at oracle.reports.server.ConnectionImpl.runJob(ConnectionImpl.java:1537)
    at oracle.reports.server.ConnectionPOA._invoke(ConnectionPOA.java:460)
    at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:637)
    at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:189)
    at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1682)
    at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1540)
    at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:922)
    at com.sun.corba.se.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:181)
    at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:694)
    at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.dispatch(SocketOrChannelConnectionImpl.java:451)
    at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.doWork(SocketOrChannelConnectionImpl.java:1213)
    at com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.performWork(ThreadPoolImpl.java:471)
    at com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:500)
    Caused by: java.net.ConnectException: Connection refused
    at sun.nio.ch.Net.connect(Native Method)
    at sun.nio.ch.SocketChannelImpl.connect(SocketChannelImpl.java:500)
    at java.nio.channels.SocketChannel.open(SocketChannel.java:146)
    at com.sun.corba.se.impl.transport.DefaultSocketFactoryImpl.createSocket(DefaultSocketFactoryImpl.java:60)
    at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:188)
    ... 23 more
    [2012-11-14T07:37:11.297+01:00] [reports] [NOTIFICATION:16] [REP-56004] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [URI: /reports/rwservlet/showjobs] EngineInfo:setState Engine rwEng-0 state is: Shutdown
    [2012-11-14T07:37:11.297+01:00] [reports] [TRACE:32] [REP-56047] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] [URI: /reports/rwservlet/showjobs] EngineManager:remove Reports Server shut down engine rwEng-0.
    [2012-11-14T07:37:11.297+01:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] [URI: /reports/rwservlet/showjobs] JobManager:start Using Maximum Job Retry value = 0
    [2012-11-14T07:37:11.297+01:00] [reports] [NOTIFICATION:16] [REP-56016] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [URI: /reports/rwservlet/showjobs] JobManager:updateJobStatus Job 1658 status is: The report terminated with error: [[
    REP-56048: Engine rwEng-0 crashed., job Id: 1658.
    [2012-11-14T07:37:11.297+01:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] [URI: /reports/rwservlet/showjobs] JobObject:writeLongUTF Number of Break Index values=1
    [2012-11-14T07:37:11.298+01:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] [URI: /reports/rwservlet/showjobs] JobObject:writeLongUTF String= Engine rwEng-0 crashed., job Id: 1658 strlen=37
    [2012-11-14T07:37:11.298+01:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] [URI: /reports/rwservlet/showjobs] JobManager:notifyWaitingJobs Master job 1658 notify its duplicated jobs.
    [2012-11-14T07:37:11.299+01:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] [URI: /reports/rwservlet/showjobs] JobManager:updateJobStatus Finished updating job: 1658
    [2012-11-14T07:37:11.299+01:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] [URI: /reports/rwservlet/showjobs] JobManager:runJobInEngine Encounted exception in job 1658
    [2012-11-14T07:37:11.299+01:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] [URI: /reports/rwservlet/showjobs] ConnectionImpl:runJob jobid = 1658 Failed with exceptionoracle.reports.RWException: IDL:oracle/reports/RWException:1.0
    [2012-11-14T07:37:11.318+01:00] [reports] [NOTIFICATION:16] [REP-56013] [oracle.reports.server] [tid: 12] [ecid: 0000Jf_MXxPFg4^kxS3j7k1GbGIR000003,0] ConnectionManager:release Connection 239 is released.
    [2012-11-14T07:37:11.382+01:00] [reports] [NOTIFICATION:16] [REP-56020] [oracle.reports.server] [tid: 13] [ecid: 0000Jf_MXxSFg4^kxS3j7k1GbGIR000004,0] EngineManager:spawnEngine Launching engine rwEng-0.
    [2012-11-14T07:37:11.382+01:00] [reports] [NOTIFICATION:16] [] [oracle.reports.server] [tid: 13] [ecid: 0000Jf_MXxSFg4^kxS3j7k1GbGIR000004,0] EngineManager:spawnEngine OS Name = Linux : OS Arch = amd64
    [2012-11-14T07:37:11.383+01:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 13] [ecid: 0000Jf_MXxSFg4^kxS3j7k1GbGIR000004,0] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] EngineManager:spawnEngine Start engine command line = /utility/app/oracle/product/fmwfr/formsreports1/config/reports/bin/rwengine.sh -server -cp /utility/app/oracle/product/fmwfr/formsreports/reports/jlib/rwrun.jar -Dcomponent.path=rep_test -Doracle.reports.component=rwEng-0 -Dinprocess.server=false -Duser.language=it -Duser.region=IT -Xms512m -Xmx512m -Xss512k oracle.reports.engine.RWEngine name=rwEng-0 server=rep_test ORACLE_HOME=/utility/app/oracle/product/fmwfr/formsreports engineimplclass=oracle.reports.engine.EngineImpl cacheDir=/utility/app/oracle/product/fmwfr/formsreports1/reports/cache diagnosis="yes" keepConnection="yes" server_ior="/test/orafood/tmp/rep_test_129261664_1352875031383"
    [2012-11-14T07:37:11.386+01:00] [reports] [NOTIFICATION:16] [REP-56021] [oracle.reports.server] [tid: 13] [ecid: 0000Jf_MXxSFg4^kxS3j7k1GbGIR000004,0] EngineManager:spawnEngine Engine rwEng-0 has been launched.
    ====================================================================================================================
    Regards,
    KVS
    I can post the other logs if it helps.

    Hi Rajesh,
    If you just want to execute the report in web, you can do one thing.
    Go to Query designer of your relevent system.
    Open the Query which you want to execute in Web.
    Then in the Query tab(first one) in the drop down list you have the Option  'execute'./ the 5th Icon  in the Query designer screen.On clicking this it will open a new window( Internet Explorer) and prompts for your system credentials.
    Upon providing them  the query start executing if it deosn't have any selections, else selection screen appears.
    You can save the link and can use this when ever you want to execute the query.Use it in the BW system environment's Intrenet explorer only.
    Hope this helps.
    Regards,
    Ganesh Thota

Maybe you are looking for