ISE: support for IPv6 DACL's

Hi,
Does anyone know if/when ISE will be able to push out IPv6 dynamic acl's? I have not managed to find any information on this other than an old post here: https://supportforums.cisco.com/discussion/11795676/ise-support-ipv6-dynamic-acls
Thanks,
Phill Macey

It's not supported as of the current ISE 1.3.
I've heard it is planned for a future release but there's no announced or committed date as of yet.
If your're working with a partner or Cisco account manager, be sure to officially request it if it's important to you. Customer requests help build the business case for prioritizing the features.

Similar Messages

Does Aironet 1100/1120/1130 support for IPv6 ?

Experts,
I find much document, but not found information about whether those support for IPv6 e.g. dual-stack like newer series.
Has anyone used to test on those?
Thank you in advance for any info,
Nipat.p

Hi,
When working with WLCs if you are running code 7.2 you will be able to support IPV6 but this code is only supported by the latest model of WLCs and the APs that are supported under this code.
On previous WLCs models that support up to code 7.0, the WLC only handles IPV6 pass through after code 6.0 since it does not support native IPV6.

ACE support for IPv6

Hi,
Does ACE support IPv6? Are there any limitations on deploying ACE with IPv6?
Thanks,
Nitesh

Hi Syed,
What's the update on support for IPv6. When is it expected to support it. Any comments on it?
Regards,
Nitesh

ACE module support for IPv6 ?

what is the latest on IPv6 support for ACE module? I saw something saying 2HCY10, but that's where we are now. Any documentation pointers to current compatability and or roadmap are greatly appreciated.
thanks
Bob O.

As mklemovitch described in the following thread, IPv6 will be
supported on ACE30 module but not in the initial release.
There is no plan for ACE20 module.
https://supportforums.cisco.com/message/3192517#3192517
I'm not sure but maybe around Q3 CY11 or later.
I cannot see the documentation regarding this feature on CCO.
I would suggest to contact your account team for details.
Regards,
Yuji

Support for IPv6 DHCP or RDDNS

Hi,
I'm deploying IPv6 on our company and found out there is not possible way to automatically get DNS servers for IPv6 for mac computers, since it doesn't support dhcpv6 or the extensions for RA in stateless configuration mode.
Any word on when are this features going to be available?

It's really rather ridiculous DHCPv6 isn't implemented in OS X yet. I can (possibly) understand this for 10.4 and 10.5 but 10.6 is going to run into IPv6 deployment scenario's and should be able to handle all cases. I hope to God 10.7 has decent v6 support throughout OS X.
As far as I know, the dhcp-client used by OS X is the KAME project client, now known as WIDE-DHCP which does have support for DHCPv6 and has so for a long time. Why Apple is so reluctant to include this feature in both iOS and OS X is quite the mystery.

Identity Services Engine (ISE) support for the WLC 2500

Is the ISE going to support the 2500 series Wireless LAN Controller WLC? If yes in what release and appriximately when is that due to be released?

Your question is disturbing. ISE is (amongst other things) a radius server. WLC 2500 can use radius servers for authentication. So it's supported.
Any device doing radius is supported with ISE ...
Now you are maybe referring to a particular feature in ISE ?

Support for IPv6

Hi all,
As i understand that IPv4 may run out as early as nxt mth. And we may need to use IPv6. Hence i would like to know if the following devices support IPv6.
1)cisco asa 5510/5505
2)cisco pix 515e
3)cisco 2811
4)cisco 1811/1841
5)cisco 837
6)cisco 1720
How are you planning the transition from IPv4 to IPv6? Pls advise, thks in advance.

The whitepaper link lists software version information you'll need to know to determine if your devices are currently IPv6-capable. If they are, you should check out the IPv6 resource center at http://www.cisco.com/ipv6 for more on addressing, configuration, advanced IPv6 features, managing an IPv6 network, etc.

Support for IPv6 Router Advertisement Option for DNS Configuration RFC 5006

Hi everyone, do you know that whether Cisco routers support “IPv6 Router Advertisement Option for DNS Configuration RFC 5006” currently, is there any roadmap for this support? Thanks for your help!

No, this is not currently supported, and the last I heard, there is no roadmap for this until it becomes a standard (as opposed to being experimental).

GRC Controls Suite Support for IPV6 and IPV4

Dear all
Please can you help to confirm whether latest version of GRC Controls Suite support the co-existence of IPv4 and IPv6 or capable of transporting IPv6 and IPv4 traffic within it?
Any help much appreciated?
best regards
Vineet

Please see MOS Note ID: 741001.1 - GRC Suite Certification Matrix
If the information you need is not there, I strongly recommend open an SR to find out and let us all know!

IPv6 support for oci

Hi,
I am using oci.dll 10.1.0.4. I would like to know whether it supports IPv6?
In all forums related to IPv6 support for oci I find it redirected to IPv6 support Oracle database 9i and 10g (which do not support IPv6), but my question is whether the interface library support IPv6?
Thanks in advance.
Regards,
Richa

No, there is no support for IPv6 in any part of 10g; you need at least 11.1.0.6. See Meatlink Note 579222.1.

IPv6 Multicast support for service providers 6PE / 6VPE

Hi,
Can anyone comment on the current state of development for IPv6 Multicast support for Service Providers who are using 6PE or 6VPE in their MPLS core.
(6PE - SP is running MPLS in its IPv4 core, it uses IPv6-enabled provider edge (PE) routers to transport IPv6 traffic over an IPv4-only enabled core. 6PE does not support VPN,s it just provides a mechanism for tunneling IPv6 packets from ingress PE to egress PE routers)
(6VPE - refers to a PE router capable of supporting IPv6 VPNs. A 6VPE solution can be used to provide IPv6 based layer 3 VPN services in a similar way to IPv4 based Layer 3 VPN services.)
My understanding is that 6PE and 6VPE solution are unable to support IPv6 multicast traffic.
Any further information on configuration, design or development work in the pipeline would be gratefully received,
kind regards John

Hi John,
From our question I understand you are sking about the MVPN support for IPv6 multicast. It is actually supported on the XR platform as of now. Please refer:
http://www.cisco.com/en/US/docs/routers/xr12000/software/xr12k_r4.0/multicast/configuration/guide/mc40mcst.html#wp2890031
I hope this helps.
Regards,
Ruchir

ISE Support IPV6 Dynamic ACLs

Does ISE support IPv6 in its dynamic ACLs? We are a dual stack IPv6 site at present. We could leave the guest LAN on an IPv4 only site for the moment, but we intend to go forward and support IPv6 fully. If we wanted to apply DACLs to a port that had a Dual Stack arrangement, is that possible from ISE?

ipv6 support for ise is not implemented yet (version 1.1.3 or 1.1.4)
i thought it will arrive in version 1.2
but as i am looking to improvements in version 1.2 Q&A i cannot see anything about ipv6
http://www.cisco.com/en/US/prod/collateral/vpndevc/ps5712/ps11637/ps11195/qa_c67-658591.html
our customer has blocked ipv6 on wifi as we cannot put dynamically one ipv4 and ipv6 ACLs at the same time
if someone as some "official news" about ipv6 ... would appreciate
rgds,
guillaume

ISE 1.2.1 support for Yosemite?

Hello all, just curious. I see in the release notes for ISE 1.2.X that support for Mac OS 10.10 (Yosemite) was available via patch 12 on the ISE1.2.0 train of code. That said, I see nothing in the release notes stating any support for Yosemite for any of the patches for ISE1.2.1, the latest being patch 3 released 1 week after ISE 1.2.0 patch 12. Can anyone please advise if Yosemite is in fact supported on 1.2.1 with patch 3??
Thank you very much in advance for your help
Jeff

Jeff,
OS X 10.10 is supported in ISE 1.2 p11, 1.2.1 p2 and 1.3.
Patch 12 for 1.2 and Patch 3 for 1.2.1 fix other issues for OS X 10.10, and I recommend updating to the latest patches for these fixes.
Here is the entry in the Release Notes detailing the fix for 10.10 in 1.2 p 12:
MacOsXAgent versrion 4.9.5.3 should be used and MacOsXSPWizard 1.0.0.30
Note that the description for these files denote ISE 1.2 Patch 11/12, ISE 1.3 release and above. ISE 1.2.1 is not mentioned, but follows the bug fix/release schedule for 1.2, with an adjustment.
1.2 patch 10 = 1.2.1 patch 1
Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.
Charles Moreton

I want to integrate SMS gateway to Cisco ISE 1.2 and my question is SMS notifications are supported for Guest self−registration

I want to integrate SMS gateway to Cisco ISE 1.2 and my question is
SMS notifications are supported for Guest self−registration Services ? or it should be done by Sponsor

I'm not sure I understand the question. Do you want to log in to the Sponsor Portal using AD credentials?
Create an Identity Source Sequence using AD as an Authentication Source. Go to Administration > Identity Management > Identity Source Sequences. Either Edit or +Add a Sequence and choose from the Authentication Sources shown.
Then choose that Identity Source Sequence by going to Administration > Web Portal Management > Settings. Double-click Sponsor from the Left Menu and click Authentication Source. Choose the Identity Source Sequence. Click Save.
I hope this helps.
Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.
Charles Moreton

C3750V2 Support for CoA and the Overarching ISE Features

so this document lists support for some of the 3750 lines, but not all ...
http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/compatibility/ise_sdt.html
What I really need to know for is, is the 3750V2 also included ?
Thanks guys !

Yes, it is not listed but it is supported. CoA was added to the 3750 family switches in version 12.2(52)SE:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750/software/release/12-2_55_se/release/notes/OL23054.html
Thank you for rating helpful posts!

ISE: support for IPv6 DACL's

Similar Messages

Maybe you are looking for