ISE Time Management for Sponsor Portal User

Hi all,
I'm currently using ISE version 1.2 and when I create a custom time management for each user, the rule applied to each user is only applied for a maximum 10 days eventhough I configured it for ex.30 days.
want to check with all of you if anyone have the same issue?
Firstly I think it's because the purge time is default set for 15 days, but even when I already changed it. The expiration time will still not get over than 10 days.
Cheers
Ryan

Default Guest Time Profiles
Time profiles provide a way to give different levels of time access to different guest accounts. Sponsors must assign a time profile to a guest when creating an account, but they cannot make changes to the time profiles. However, you can customize them and specify which time profiles can be used by particular sponsor groups. Beginning with Cisco ISE 1.2 time profiles are referred to as the account duration in the Sponsor portal.
Cisco ISE 1.2 includes these default time profiles, which replace the profiles available previously:
•DefaultFirstLoginEight—the account is available for 8 hours starting when the guest user first successfully connects to the Guest portal. This replaces the DefaultFirstLogin time profile.
•DefaultEightHours—the account is available for 8 hours starting when sponsors first create the account. This replaces the DefaultOneHour time profile.
•DefaultStartEnd—sponsors can specify dates and times on which to start and stop network access.
If you upgrade to Cisco ISE 1.2, the older time profiles are still available, but you can delete them if you are not using them. If the older time profiles are assigned to a sponsor group, a message alerts you before deleting. If you perform a new installation of Cisco ISE 1.2, only the new time profiles display.

Similar Messages

  • What is the password for the Portal User in 9i Release 2?

    What is the default password for the Portal User in 9i AS Release 2? I'm assuming this is the equivalent user to the Portal30 user in 3.0.9?
    Thanks.

    Jeremy,
    The default password for the Portal user in the same password as ias_admin. This would be defined at install time through the Oracle Universal Installer. However, if you're asking about identifying the Portal schema password in the database, you can login to the Directory Manager(assuming you're using Windows)and login as
    cn=orcladmin
    password: (ias_admin password)
    Click on (entry management)=>(cn=OracleContext)=>(cn=Products)=>(cn=IAS)=>cn=Infrastructure Databases => ReferenceName=sid:host=>ResourceName=Portal. Click on the entry and look at the orclpasswordattribute.
    Incidentally, you can also find the orasso password by checking the ResourceName=orasso.
    Note:198800.1 on metalink would be a good resource to follow.
    Thanks,
    Sudi Narasimhan
    Oracle9iAS Portal Partner Management
    What is the default password for the Portal User in 9i AS Release 2? I'm assuming this is the equivalent user to the Portal30 user in 3.0.9?
    Thanks.

  • Is it possible to increase user exit time out for a partcular user

    Dear Sir/madam,
    Is it possible to increase the User Time Out for a Particular user ?
    We do it through RZ10 and as per I know when it is changed, it is effected to all the users.
    Pls advice.
    Thanks,
    Pranab

    Hi Pranab,
    Not possible for a single user.
    Regards
    Ashok Dalai

  • How to change the UWL refresh rate for all portal users.

    Hi Portal Experts,
    How to change the UWL refresh rate for all portal users?
    Users can individually change the refresh rate through "Personalise View" in UWL.But we want this to set it for all users(we have 10k portal users).
    It was defaultically set to 5 mins for all users.How to change this to 20 mins.
    Thanks
    Sony.

    1.      Launch the UWL iView configuration page.
    You can access the iView from the UWL administration pages (System Administration ® System Configuration). Navigate to the property editor as follows:
          From the Universal Worklist Systems, choose the system for which you want to edit the properties.
        Choose Edit.
    may be you can get clear help from below help file
    http://help.sap.com/saphelp_nw04s/helpdata/en/eb/101fa0a53244deb955f6f91929e400/frameset.htm
    regards
    nagaraju

  • Execute Webdynpro4Abap Application with same ERP-User for all portal-users?

    Hi,
    is it possible to let a Webdynpro4Abap application run with only one ERP-User for all portal-users? Therefore not needing an ERP-license for every portal-user?
    Somekind of mapping maybe?
    Regards
    Jan

    Jan,
    It is possible but it all depends on the type of application .If you want to show same data for all users you can use one user but if data is different for all users then you cannot go with this approach.
    to configure single backend user for your application go to tcode SICF and look for that application and go to logon data tab by double clicking and give one common user details
    Thanks
    Bala Duvvuri

  • ISE 1.1.1 Sponsor Portal - Button "Clear Filter" appeares twice

    I think I discovered a Bug with the Button labels when displaying Guest Users in the Sponsor Portal.
    When using Internet Explorer (tested 7 and 9) both butons are labeled "Clear Filter".
    It apears the same in every language template.
    When using Firefox (16.x) everything is ok.
    I added a screenshot to make clear which buttons are affected.

    FYI
    You can access the Cisco ISE administrative  user interface using the following browsers:
    •Mozilla Firefox 3.6 (applicable for  Windows, Mac OS X, and Linux-based operating systems)
    •Mozilla FireFox 9 (applicable for Windows,  Mac OS X, and Linux-based operating systems)
    •Windows Internet Explorer  8
    •Windows Internet Explorer 9 (in Internet  Explorer 8 compatibility mode)
    Note Cisco ISE GUI is not supported on  Internet Explorer version 8 running in Internet Explorer 7 compatibility mode.  For a collection of known issues regarding Windows Internet Explorer 8, see the  "Known Issues" section of the Release Notes for Cisco Identity Services Engine,  Release 1.1.x

  • ISE: time profile for authenticated usergroup access

    Hi forumers'
    I would like to setup a session condition like what ACS can do. This is using for the user after authentication, then they were authorize with the time allotment profile for them to accessing the resources on the network.
    Can i do this over ISE, beside guest manamgent >  sponsor group's time profile?
    What if current ISE not ready for this, how's the high level design would be for time profile for usergroup access look like?
    Example
    a. trusted full time employee, accessbile 24x7x365
    b. not confirm, internship employee, with only accessbile right of 8x5 per day
    Thanks
    Noel

    Thanks for the reply, but I'm really seeking the feature of prevent multiple self registration for the same user, and I don't think that it is available right now.
    The only working idea here is blocking the MAC address for the machine doing the registration because everytime the user will be able to register with new email address or mobile phone.
    Also one feature can be interested here, that the user can do self registration with Phone mandatory so the ISE will send SMS to the user with the credentails to use.
    Thanks.
    Ahmad.

  • WHAT IS THE MECHANISM FOR AUDITING PORTAL USER ACTIVITY

    Is there any default mechanism for auditing a portal users access to
    tables. At the DB level, we are seeing the portal_public user but we want to see the portal user instead; e.g. we need to report on activity such as: portal user johndoe deleted a row of data from a table.
    johndoe is only a portal user not a database user.
    We are trying to keep from writing additional custom code to auditing. We are
    using wwctx_api.get_user_id in other parts of the application and we would like
    to avoid writing a custom auditing module.

    William,
    I'm not sure if this is what you are looking for, but...
    When you create (or edit) a component in Portal 10g, there is a Log Activity check box. If you check this box, then go to Manage the component (in the Portal Navigator), there are Develop, Manage and Access tabs. The Manage tab has a Monitor icon, which has the information you may be looking for. This does not seem to be available directly for database tables. However, I created a Calendar, based on a database table I created to keep track of the Calendar Events. I also created a form to allow users to add Calendar Event entries. I turned logging on for both components. The Monitoring allows me to see when each user has accessed the Calendar, and who and when they insert, update or delete entries from the Calendar table.
    -Ricky Burke

  • ISE 1.2 corrupted sponsor portal

    Hi,
    since I started to use ISE sponsor portal it showes me wrongly, see attached screenshot.
    I tried various browsers, but the problem is the same. Other pages are okay, just the main with guest users has problem.
    Looks like it happened after upgrade from previous ISE version.
    Does anybody know how to fix this?
    Thanks and greets
    Karel

    Hi Karel,
    As regarding to your query,
    These selections will allow guests to change their password, perform self-service, and require
    acceptance of a default AUP upon login.
    Changed in ISE 1.2: Now that we have the ability to Change Account Duration (discussed later in the lab) the option
    to Require guest and internal users to change password at expiration and first login has been updated so that
    the guest must change the password when not only first logging in but then also when the expired account has been
    reactivated. It’s not being used in this lab so be aware of this option.
    Self-service allows any user to generate access credentials without requiring a sponsor to perform this task.
    As this is not a sponsored user and any user may create their own account with this policy setting, it is
    common to assign self-service guests to an Identity Group with minimal network access privileges such as
    “Internet_Only”.

  • Report on portal User ID and Assign Roles for all portal users

    Hi!
    I would like to know , is there way that we can get a report which shows all the portal user ids with there assign portal roles. If we can't get this from portal. Can we get it from Oracle database ?
    What are the oracle tables and fields which store this information?
    If nay one have a custom develop iview for this please let me know
    Thanks
    Ramesh

    Hi Ramesh,
    as Pascal stated (and as I did above), if developing within the portal is not really new for you, playing around with the UME API is really more or less trivial.
    Check Portal User and Role info as well as User to Role listing for similar requests and code hints / further links.
    Hope it helps
    Detlev

  • How to get the total time spent by a Portal User for a given Date?

    Hello,
    We need to develop a Daily Audit Track Report that displays
    the Users logged into our System for a given day and the total login duration in Hours( should include all the
    Login-Logouts of a given date).
    While Portal30_SSO.WWSSO_AUDIT_LOG_TABLE$ can help me get the Users login to Portal for a day, there is no Login/Logout periods in it.
    Any help would be appreciated.
    Thanks
    Madhav

    You may want to consult with the view WWLOG_ACTIVITY_LOGS. Not sure how your environment is configured, but ours includes two WWLOG_ACTIVITY_LOG tables (1 & 2). These tables purge themselves based on your configuration. In other words, Portal will log activity in WWLOG_ACTIVITY_LOG1$ for a certain period of time, then switch to WWLOG_ACTIVITY_LOG2$ while purging the first one. You can specify the purge timetable in the Adminster tab of the Admin page (under Global Settings). If you just key on just 1 log table, you're logs may someday go blank.
    The actions used are 'login' and 'logout'. You can link the actions using the key_1 and key_2 columns of the view. From our current experience, Portal does not account for users that simply close the browser. In other words, we have not been able to get a log event for the action 'logout' for the same key_2 value if someone does this.

  • Single  Sign on Issue for new Portal Users

    We are implementing ESS on EP 6.0. the architecture is like EP 6.0 - ITS - R/3.
    and we want to implement the single sign-on. so that when the users login the portal, the Portal Authenticates the user and then portal uses just the Portal UserID and logs in ITS/R3 without verifying the SAP PWD. Portal ID and SAP ID are same.
    The single sign on is working fine for those users who already have an SAP ID.
    we need to create new R/3 ID's for the new employees. and we don't wanna let the employees login in directly to R/3.
    When we create a new ID in R/3 and login for the first time in R/3, it asks to change the password.
    since the new employees won't be using R/3 and they login through portal and b'cos we implemented single signon, the portal tries to login in r/3 using the Portal ID/R3 ID, but the SAP R/3 ID is not actived since the user did not change the password, the SSO is failing.
    We didn't wanna assign the R/3 ID a password. since it will be an audit issue.
    Can anybody give any suggestions, so that the administrator need not assign a password and the users need not login in r/3 and change the pwd for the first time.
    Hope you understand my problem, if u need any clarification, let me know..
    Thanks.

    Hi Gopi-
    You can override the password check when a valid logon ticket is presented by setting the profile parameter:
    login/pasword_change_for_SSO   0
    using RZ10 in the instance profiles.  (Requires a restart of R/3)
    This overrides the password prompt/check when the user presents a valid logon ticket. 
    Hope this helps you out.
    Thanks,
    Marty

  • Session Time Out For UNLOGGED IN USER During Search -pls help SIR!

    Hi,
    The problem lies in searchresultscontroller.java/searchcontroller.java file under search/web/handler of an application that supports educational note sharing.
    The problem is that -
    When I search with query strings in different fields(as you will find in the above mentioned java files)..the keywords in resourcedto and get some files as search results.
    Then I click on one of the file from within the search result and visit the file.
    Here if I m logged in as an user, and the session time out is set to 1 minute in the web.xml file of the web folder not the admin folder then when I hit the BACK TO SEARCH button it easily goes back to the previous search result page along with the queries string that I had input previously.
    The problem is that when I m NOT LOGGED in as an user, and I've performed a search with queries and other dropdowns in the search panel, I get the search result page, I visit the file by clicking on one of them but when I hit the BACK TO SEARCH button I don't see the previous search result page from where I had navigated to view the file.
    Please suggest on what changes shall I make in the code so that even if I m not logged in as an user, I get back to the search result page on hitting the BACK TO SEARCH button from the file view page.Sir I m herein pasting the code of the searchresultscontroller.java file, but please feel free to ask for anyother file whose code you might want to see.SEARCHRESULTSCONTROLLER.JAVA FILE CONTENT-
    package com.mgh.sps.search.web.handler;
    import java.util.Map;
    import java.util.regex.Pattern;
    import javax.servlet.http.HttpServletRequest;
    import javax.servlet.http.HttpServletResponse;
    import org.apache.log4j.Logger;
    import org.springframework.validation.BindException;
    import org.springframework.validation.Errors;
    import org.springframework.web.servlet.ModelAndView;
    import org.springframework.web.servlet.mvc.SimpleFormController;
    import com.mgh.sps.search.business.facade.Search;
    import com.mgh.sps.common.dto.ResourceDTO;
    import com.mgh.sps.common.util.SessionAttributeKey;
    import com.mgh.sps.common.util.SessionManager;
    import com.mgh.sps.fileusage.web.constants.FileUsageWebConstants;
    public class SearchResultsController extends SimpleFormController {
    * SearchResults Controller
    * @author Muralikrishna.s
    * @Codedondate DD-MM-YY=26-07-07
    * @Usecase/s associated =UC504
    private static final Logger logger = Logger
    .getLogger(SearchResultsController.class.getName());
    private final static String REG_EXP = "^[A-Za-z0-9]*$";
    private final static Pattern EMAIL_PATTERN_REG = Pattern.compile(REG_EXP);
    * Spring framework method used to hold reference data
    * @param request
    * HttpServletRequest
    * @param command
    * Object
    * @param arg2
    * Errors
    * @return Map
    * @throws Exception
    @Override
    protected Map referenceData(HttpServletRequest request, Object command,
    Errors errors) throws Exception {
    logger.debug("SearchResultsController.referenceData() method entered:"
    + request + "," + command + "," + errors);
    SessionManager.setSessionAttribute(SessionAttributeKey.tabIndex,
    FileUsageWebConstants.TAB_SEARCH, request);
    Search search = (Search) super.getWebApplicationContext().getBean(
    "searchfacade");
    ResourceDTO resourceDto = (ResourceDTO) command;
    String[] allValues = new String[7];
    if (null != (String[]) SessionManager.getSessionAttribute(
    SessionAttributeKey.allValues, request)) {
    allValues = (String[]) SessionManager.getSessionAttribute(
    SessionAttributeKey.allValues, request);
    resourceDto.setKeywords(allValues[0]);
    resourceDto.setCountry(allValues[1]);
    resourceDto.setUniversityName(allValues[2]);
    resourceDto.setSubjectArea(allValues[3]);
    resourceDto.setQualification(allValues[4]);
    resourceDto.setYearLevel(allValues[5]);
    resourceDto.setSpecificType(allValues[6]);
    logger.debug("%%%%%%%%%%%%%%%%%qualification%%%%%%%%%%%%%%%"
    + resourceDto.getQualification());
    String flag = (String) request.getParameter("id");
    resourceDto.setFlag(flag);
    logger.debug("SearchResultsController.referenceData() method exited:");
    return search.retrieveReferenceData(resourceDto);
    * Spring framework method used to hold OnSubmit
    * @param request
    * HttpServletRequest
    * @param response
    * HttpServletResponse
    * @param command
    * Object
    * @param arg3
    * BindException
    * @return ModelAndView
    * @throws Exception
    @Override
    protected ModelAndView onSubmit(HttpServletRequest request,
    HttpServletResponse response, Object command, BindException errors)
    throws Exception {
    SessionManager.cleanup(request);
    logger.debug("SearchResultsController.onSubmit() method entered:"
    + request + "," + command + "," + response + "," + errors);
    Search search = (Search) super.getWebApplicationContext().getBean(
    "searchfacade");
    Map dynamic = (Map) getServletContext().getAttribute("config");
    ResourceDTO resourceDto = (ResourceDTO) command;
    SessionManager.removeSessionAttribute(SessionAttributeKey.allValues,
    request);
    //changed by sreelatha on sep21
    //resourceDto.setKeywords(request.getParameter("keywords"));
    //String key = request.getParameter("keywords");
    //logger.debug("&&&&&&&&&&&&& key &&&&&&&&&&&&" + key);
    String keywords = (request.getParameter("keywords"));
    if(null!=keywords) {
    keywords = keywords.trim();
    resourceDto.setKeywords(keywords);
    // changes end
    resourceDto.setUniversityName(request.getParameter("universityName"));
    resourceDto.setSubjectArea(request.getParameter("subjectArea"));
    resourceDto.setCountry(request.getParameter("country"));
    resourceDto.setQualification(request.getParameter("qualification"));
    resourceDto.setYearLevel(request.getParameter("yearLevel"));
    resourceDto.setSpecificType(request.getParameter("specificType"));
    String[] allValues = new String[7];
    //changed by sreelatha on sep21
    //allValues[0] = request.getParameter("keywords");
    allValues[0] = resourceDto.getKeywords();
    //changes end
    allValues[1] = request.getParameter("country");
    allValues[2] = request.getParameter("universityName");
    allValues[3] = request.getParameter("subjectArea");
    allValues[4] = request.getParameter("qualification");
    allValues[5] = request.getParameter("yearLevel");
    allValues[6] = request.getParameter("specificType");
    SessionManager.setSessionAttribute(SessionAttributeKey.allValues,
    allValues, request);
    if(null!=keywords) {
    keywords = keywords.trim();
    String words="";
    for(int i=0;i<keywords.length();i++) {
    String key=String.valueOf(keywords.charAt(i));
    if(key.contains("*")) {
    key = key.replace("*"," ");
    } else if(key.contains("?")) {
    key = key.replace("?"," ");
    } else if(key.contains("[")) {
    key = key.replace("["," ");
    } else if(key.contains("{")) {
    key = key.replace("{"," ");
    } else if(key.contains("(")) {
    key = key.replace("("," ");
    } else if(key.contains(")")) {
    key = key.replace(")"," ");
    } else if(key.contains("+")) {
    key = key.replace("+"," ");
    } else if(key.contains("
    key = key.replace("
    } else if(key.contains(" ")) {
    key = key.replace(" "," ");
    } else if(key.contains("_")) {
    key = key.replace("","");
    } else if(!EMAIL_PATTERN_REG.matcher(key).matches()) {
    key = key.replaceAll(key," ");
    words = words + key;
    keywords = words;
    resourceDto.setKeywords(keywords);
    SessionManager.setSessionAttribute(SessionAttributeKey.test, search.setInputValues(resourceDto, dynamic), request);
    String name = (String) SessionManager.getSessionAttribute(SessionAttributeKey.tempName, request);
    String flag1 = request.getParameter("id");
    String status="";
    if (flag1 !=null && flag1.equals("loggedInUser"))
    if(name==null)
    return new ModelAndView();
    if (flag1 !=null && flag1.equals("loggedInUser")){
    status = "redirect:SearchResults.htm?id=loggedInUser";
    }else if(flag1 !=null && flag1.equals("nonLoggedInUser"))
    status = "redirect:SearchResultsnlu.htm?id=nonLoggedInUser";
    super.setSuccessView(status);
    ModelAndView mav = new ModelAndView(super.getSuccessView());
    logger.debug("SearchResultsController.onSubmit() method exited:");
    return mav;
    }

    Cross-posted in many forums. Don't answer this one.

  • Time Management for Treo 755p

    Hi to all Forum Users from a Newbie:
    I have a Treo 755p wireless device.  The desktop calendar program that came with my Treo is awful - worse than the one that came with my old 650!  I need to be able to enter appointments and notes with the appointments:  for example, a meeting on Dec 16 at noon with a note of the address (not linked to my address book, because I don't want to clutter that with a one-time address), purpose of meeting,attendees, list of any documents I need to bring to the meeting, etc.  The desktop program doesn't allow notes - you can enter them in the handheld but they don't synch with the laptop.  Any suggestions for calendar programs with better features that I can download?  I use a MacBook Pro laptop.  Much thanks from mommomj
    Post relates to: Treo 755p (Verizon)

    Hello!
    For your Palm device, DateBk6 is a good idea to try.  Can be procured at www.pimlicosoftware.com. 
    Post relates to: Treo 650 (Unlocked GSM)

  • ISE 1.1.1 Sponsor Portal - Unable to create First Names with "-"

    Hi!
    Regarding our international subsidiaries there are many names that contain the character "-" (i.e. Pierre-Pascal)
    When trying to create an new Guest Account the ISE refuses it because of an invalid character in the "First Name" field.
    In other formular fields i.e. Email Address - the character "-" is allowed.
    Is it possible to change the rule which checks the fields for illegal characters? (Is it a Bug?)

    ISE 1.1.3  Go to “Web portal mangment” -> Setting -> Username Policy
    You have a field “
    Username may   include the special characters
    Username Policy
    General
    Create   username from email address
    Create   username from first name and last name
    *   Minimum Username Length
    (Valid   Range 1 to 20)
    Random
    * Username may   include the alphabetic characters
    * Minimum   number to include
    (Valid   Range 0 to 20)
    * Username may   include the numeric characters
    (Should   contain only numeric characters)
    * Minimum   number to include
    (Valid   Range 0 to 20)
    * Username may   include the special characters
    * Minimum   number to include
    (Valid   Range 0 to 10)
    Bottom of Form
    This may help you.

Maybe you are looking for