ISE: UI not visible for application launched by NAC agent during rememdiation #CSCun60071

Hi guys,
Someone facing this behavior/problem? When I start the remediation process (AV) with a administrator user, the process works fine.
But when I start the process with a normal user, the AV UI update start running in the Windows Session 0 and the user can't see the window.
https://tools.cisco.com/bugsearch/bug/CSCun60071
(No, the workaround doesn't resolved the problem).
Best regards,
Tiago

The startup drive is failing, or there is some other internal hardware fault. Everything else is completely irrelevant.
Back up all data on the drive immediately if you don't already have a current backup. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed.

Similar Messages

  • IView not visible for a single user

    Hi All,
    I am facing the a problem in our client's portal. The application is not visible for one of our client user on the portal. When he clicks on the Role->Workset->Application name, the IView is not displayed on the screen. Instead, blank page is shown.
    This is happening only to him. Other users are able to see the application and run it. I even tried by removing the roles assigned to him which are related to the application and re-assigned it. But the problem still persists.
    He is facing this problem only from past 2 days. Till then it was working fine.
    Please let me know how can this be solved.
    Regards,
    Poojith MV

    Hi,
    Firstly, we do not have the personalization option on the portal. We also requested the user to try the portal on a different which we thought could be a browser problem.
    However, the result is same on a different machine. But other users who use the same system are able to view the application. I am unable to figure out what could be wrong for just one user?
    The setting "Entry Point" is set to "yes".
    The latest update is that, the user has 2 id's created for himself with the same portal roles. The second user id is working fine, but the first user id is failing to view the application
    Regards,
    Poojith MV

  • E-Recruiting - Internal Candidates not displayed in candidate search, job postings not visible for internal candidates in job search

    Hi Friends,
    We are on EREC standalone model. Initial data transfer between HR to EREC master data using PFAL is done.
    All employees have got NA, CP, US, BP in HRP 1001 in EREC system.
    Change pointers are also activated in HCM system, now current master data changes are also in reflecting in EREC system thro IDOC posting.
    But when recruiter logs into portal and does a candidate search, no internal candidates are appearing ?
    1) What needs to be done for internal candidates to visible during candidate search ?
    2) Also while logged as internal candidate, released requisitions are not visible for internal candidates while they try to search for internal job postings ?
    Kindly provide your inputs.
    Regards,
    ER.

    Hi,
    In SLG1, getting the below error messages for multiple times.
    "Error while calling content extraction class CL_HRRCF_CEC_QUALI_WITH_PROFCY 
    The error occurred in program CL_HRRCF_SES_BUSOBJ_FROM_SPTYPCM001 line 96  
    Qualification 52000001 does not exist
    The incorrect HR object has the key 01NA60000029 "
    "The error occurred in program CL_HRRCF_ALE_EE_INBOUND"
    Also please state how to differentiate internal and external candidate search pages.
    Regards,
    ER.

  • Project Commitment Cost not visible for Purchase Orders with Item Categry Q

    Hello All
    I have a problem. My project commitment cost is not visible for PO's with Item Category Q. I assume that as the stock can be issued against any WBS elements I might not be able to see the cost against a single WBS element. But the cost should get recorded against the project right? If so where can I see it?
    Request your help with this problem
    Regards
    Renjith

    Hello
    Could you please explain how to maintain that?
    Best Regards
    Renjith

  • JComboBox - Bottom border is not visible for the first time

    JComboBox - Bottom border is not visible for the first time i click on the arrow to drop the list down.
    This happens because the list when dropped down goes out of the frame.
    If have the increased the size of the Frame then i am able to see it,but i dont want to do this.
    I am using jdk1.3.1_02.
    Any Help would be great.
    Please find the code below.
    Thanks,
    Sridhar.
    //file: Lister.java
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    public class Lister {
        public static void main(String[] args) {
            JFrame frame = new JFrame("Lister v1.0");
            // create a combo box
            String [] items = { "uno", "due", "tre", "quattro", "cinque",
            "sei", "sette", "otto", "nove", "deici",
            "undici", "dodici" };
            JComboBox comboBox = new JComboBox(items);
            comboBox.setEditable(true);
            // put the controls the content pane
            Container c = frame.getContentPane( );
            JPanel comboPanel = new JPanel( );
            comboPanel.add(comboBox);
            c.add(comboPanel, BorderLayout.NORTH);
            c.setBackground(Color.white);
            comboBox.setBackground(Color.white);
            comboPanel.setBackground(Color.white);
            frame.setBackground(Color.white);
            frame.setResizable(false);
            frame.setSize(200, 200);
            frame.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
            frame.setVisible(true);
    }

    Hello,
    try this:JPanel comboPanel = new JPanel(new BorderLayout());Regards,
    Tim

  • Key focus is not visible for all objects when tabbing

    I'm using LabView 5.1.
    The key focus is not visible for all objects when tabbing through a "disabled and grayed-out" object.
    For example, let's say I create a panel with 3 buttons. If I create a "disabled" attribute for button 2 and assign the value "2" (disabled and grayed-out) to it. When I will run this VI, the key navigation will go through button 1 and button 3 (skipping button 2 as expected) but the key focus on button 3 will not be visible.
    Is this a bug with LabView or am I doing something wrong ?

    Hi Ben,
    Don't worry, time is not an issue... I'm posting an example of a VI with the problem I described. I noticed that the problem occurs only with "dialog buttons".
    When you have time, let me know if you see the same behavior. If you do, I will report the problem to National Instrument.
    Thanks for your time !
    BigBen
    Attachments:
    3buttons.vi ‏22 KB

  • Drop down list(JComboBox) - Bottom border is not visible for the first time

    Drop down list(Combo-box) JComboBox - Bottom border is not visible for the first time i click on the arrow to drop the list down.
    I am using jdk1.3.1_02.
    Did any one face this issue.
    Please let me know.
    Thanks,
    Sridhar.

    I must be a little confused regarding your question.
    You can simply change your code frame.setSize(200, 200); to frame.setSize(400, 400);When you say you are unable to see the border are you specifically talking about the border of the frame or the border of the combo box?
    Lance

  • Profile description is not visible from Application which the LDT file has.

    Experts,
    I am running into strange issue.
    Dev created a LDT file for a profile and requested to upload it through a one-off patch.
    The profile got updated into the DB for all the 3 languages - US, KO and AR.
    However the description is not visible for US when tried to verify from the Forms.
    Further analysis gave a tip that the description is NULL only for US and exists for other 2 Langs (KO and AR).
    SQL> select PROFILE_OPTION_NAME, DESCRIPTION, LANGUAGE, LAST_UPDATE_DATE, LAST_UPDATED_BY, CREATED_BY, CREATION_DATE
    2 from fnd_profile_options_tl where
    3 profile_option_name='INL_ITEM_CATEGORY_SET';
    PROFILE_OPTION_NAME DESCRIPTION LA LAST_UPDAT LAST_UPDATED_BY CREATED_BY CREATION_D
    INL_ITEM_CATEGORY_SET {Category Set to determine the items that will be  AR 09-NOV-12              122        122 11-JUL-11
                              LCM trackedسÙÙ
                                             اÙ
    ٠سÙÙ
          اÙ
    ٠سÙÙ
          اÙ
    ٠سÙ}
    INL_ITEM_CATEGORY_SET {Category Set to determine the items that will be  KO 09-NOV-12              122        122 11-JUL-11
                              LCM trackedâ
                                          ¦'+++ '+++ '+++ '+++ '+++ '+++ '+++ '++
                              +Ã
    INL_ITEM_CATEGORY_SET                                                                            US 12-MAR-12             *2330*        122 11-JUL-11
    SQL>
    Also identified the Last Updated By is from FND User - "PROCESS_OPS"
    SQL> select USER_ID, USER_NAME from fnd_user where USER_ID in (122, 2330);
       USER_ID            USER_NAME
           122               ORACLE12.2.0
          2330              PROCESS_OPS
    SQL>
    What could be the reason behind this change?
    Why the profile description only for US Lang is not getting updated whereas for other languages it got updated by FND User - "ORACLE12.2.0"?
    It clearly shows on 09-Nov-12 there were some changes happened and that to by User_ID 122 which updated for KO and AR.
    For some reason the same was not applied for US Lang.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    HI Hussein,
    I am waiting for your update only.
    We have requested Dev to chek the same got to know that,Yes, when tried with CUSTOM_MODE=FORCE, it is working fine.
    But they are insisting on how the other Langs got updated and why it would not update for US alone.
    Just check the Profile from FND_PROFILE_OPTIONS about the profile details and found below.
    SQL> select APPLICATION_ID, PROFILE_OPTION_ID, LAST_UPDATE_DATE, LAST_UPDATED_BY, CREATION_DATE, CREATED_BY
    2 from fnd_profile_options where PROFILE_OPTION_NAME='INL_ITEM_CATEGORY_SET';
    APPLICATION_ID PROFILE_OPTION_ID LAST_UPDATE_DATE LAST_UPDATED_BY
    CREATION_DATE CREATED_BY
    9004 1011555 12-MAR-12 2330
    11-JUL-11 122
    SQL>
    For some reason the TL got lastupdate_date and 09-NOV-12 and the same is not reflecting in FND_PROFILE_OPTIONS.
    Please advise.

  • Files newly added in system after having opened firefox are not visible for attachments

    if firefox is alrady running & new file is being added to the system,the same is not visible for attaching the file in gmail. what must be the issue?

    if firefox is alrady running & new file is being added to the system,the same is not visible for attaching the file in gmail. what must be the issue?

  • SAP RM: How can I create a Node when the node is not visible for the user

    Hi,
    Product: SAP records Management for Public Sector
    Version: 7.00
    is it possible to create a instance node when the model not is not visible for the active user?
    I looked in the CL_SRM_XML_REC_MODEL but every methode I used gave me no results with the special user.
    Regards and thanks for every beginning
    Fanninger Thomas

    Hi,
    here an example.
    When I use the method CL_SRM_XML_REC_INSTANCE->IF_SRM_XML_POID~GET_ALL( POID_TAB COUNT_USER_REST COUNT_POID_AUTH ).
    When I used the user with no right for viewing the invisible nodes I get no elements in the tabelle POID_TAB and 38 in the value COUNT_USER_REST.
    So did any one know a solution you can I create a nodes and change the restriction for the new node with the normal user?
    Regards
    Fanninger Thomas
    Edited by: Thomas Fanninger on Feb 5, 2008 8:15 AM

  • Loaded data not visible for Reporting?

    Hi all,
       In the info cube, the data is not visible for reporting, How can i make it available for reporting,
    When i select the Manage option from the context menu of the cube and select the Requests Tab, i get a pop up message that tells
    " There is an inconsistency between the load status of the data and the option of reporting on this data.
    There is data in the InfoCube/ODS object that is OK from a quality point of view, but is not yet displayed in reporting.
    The problem, for example, is to do with request 0000018049, number REQU_F4ZBFRMDGBULE9WCUN3R5UX5X."
    How do i find out the inconsistancies?
    PS: All the requesta are delta upload
    Thanks n regards
    Girikumar

    Hi Girikumar
    Use the RSRV transaction and check the inconsistency of the cube ..If any inconsistency is there repair that with the repari option in the toolbar..
    Let me knwo if it not resolved..
    Bye
    Shu Moh..

  • LifeTime tab not visible for WPC content

    Hello,
    For any WPC content if we go to Details -> Properties, there is tab called Lifetime where we can set from when to when this content is valid.
    Some how it is not visible for any of my content in my new installation. I am using Portal 7.0 SP16.
    Point will be awarded to resolve this issue.
    Also I wanted to ask does this LifeTime means content should be unavailable after the Expiry period we set here, correct?
    regards,
    Jaish

    I went to SAP Tech Ed in Las Vegas and came to know that there is bug in WPC for this so they removed this feature in SP16 of Portal 7.0. This is why I was not seeing this after the version update.

  • Oc4jadmin not working for application server control in SOA suite 10.1.3.1.

    Hi,
    We have installed the SOA suite, and I can login to the various components using oc4jadmin/password (bpel, esb, rules author), but for some reason that oc4jadmin password is not working for Application Server Control, which is the only piece of this I really need to log in to.
    Any thoughts on what is going wrong?
    Cheers,
    Pat Rock

    Maybe you change this password internally for another application (such BPEL, WSM,etc) and didn't make change for your main OC4J container.
    You can try to change this password by...
    1. Open the file [OASHome]\j2ee\home\config\system-jazn-data.xml
    2. Find the section that looks like this
    [user]
    [name]oc4jadmin[name]
    [display-name]OC4J Administrator[display-name]
    [guid]88836370D11611DC9F30F9C1CD6F1A73[guid]
    [description]OC4J Administrator[description]
    [credentials]{903}F+iG1A46edXG9RdfY0pD2O4Ge/qyEjsg[credentials]
    [user]
    3. Replace the value separated by the "Credentials" starting and ending tags with your new desired password, prefixed with an exclamation point
    Example:
    [user]
    [name]oc4jadmin[name]
    [display-name]OC4J Administrator[display-name]
    [guid]88836370D11611DC9F30F9C1CD6F1A73[guid]
    [description]OC4J Administrator[description]
    [credentials]!newpassword[credentials]
    [user]
    4. Save the file and restart OAS
    This should not affect other applications.
    Greetings.

  • Incoming Email settings is not visible for SharePoint SkyDrive.

    Incoming Email settings is not visible for SharePoint SkyDrive. Is this the expected behaviour or is there any workaround to resolve this?

    Hi,
    I have tested the issue in my environment, there is no incoming email setting in my OneDrive library setting. It seems like it is by design.
    Thanks for the understanding.
    Regards, 
    Rebecca Tu
    TechNet Community Support

  • Services for object box not visible for some users

    Dear All,
    PM module experts please help. In equipment master transaction IE02  in left hand top corner we get  box for SERVICES FOR OBJECT which is useful for attaching external documents like word and excel. but problem  is it is  not visible for some users.  Our security/authorisation team has also done some check but didn't get any solution.
    anybody knows the reason why there is no box availabe?
    Thanks
    SR

    Dear Siddhartho Raha
    I think this problem related ABAP work,this problem very general problem,first refer any note availble or search throgh any class in SE24
    note are like this way 492331,this is not related to your query but same like it is and also may be
    Due to an error in the coding, it was possible to link a Word document to a Document in IE01. Because the data cannot be saved in transaction IE01, the linked document is lost after leaving the transaction.
    Hope this may helps you
    Prem.

Maybe you are looking for