ISE - Unable to get SNMP information with the community

this is the output on the switch when clicking on a switch interface in authentications monitoring in ise
test2#sh snmpChassis: FOC1330W1K0112 SNMP packets input 0 Bad SNMP version errors 4 Unknown community name 0 Illegal operation for community name supplied 0 Encoding errors 44 Number of requested variables 0 Number of altered variables 44 Get-request PDUs 0 Get-next PDUs 0 Set-request PDUs 0 Input queue packet drops (Maximum queue size 1000)143 SNMP packets output 0 Too big errors (Maximum packet size 1500) 0 No such name errors 0 Bad values errors 0 General errors 108 Response PDUs 35 Trap PDUsSNMP global trap: enabledSNMP logging: enabled Logging to xxx.xxx.yyy.5.162, 0/10, 7 sent, 0 dropped. (admin/monitoring)SNMP agent enabled
config of snmp:
snmp-server community snmp-com.public RO 33access-list 3 permit xxx.xxx.kk.0 0.0.0.255access-list 3 permit xxx.xxx.zz.0 0.0.0.255access-list 3 permit xxx.xxx.yyy.0 0.0.0.255 (admin/monitoring)
Unknown community name keeps rising when I click on the switch interface name in ise ... any suggestion ?
Snmp is configured for the switch added to ise with the right community name (v2c - snmp-com.public )
Ise ver 1.1.2.145
thank you for your help

thank you for your feedback and yes the acl in this situation is the only secure option
once again... it's a shame that a security appliance forces you to use unsecure passwords and protocols..
marking your answer as correct
hopefully this thread will help others
thank you again

Similar Messages

I recently purchased Foo Fighters Sonic Highways on iTunes. Where is the album artwork, liner notes and pictures? When purchasing/downloading entire album on iTunes, do you get this information with the purchase?

I recently purchased Foo Fighters Sonic Highways on iTunes. Where is the album artwork, liner notes and pictures? When purchasing/downloading entire album on iTunes, do you get this information with the purchase?

The album cover art should show on the album in the Music part of your library. For other pictures and/or notes, does the album description page in the store say that it's an iTunes LP (does it have an LP label against it in the store) ? If not then you will just get the tracks.

Zend core xe / doesn't display server conf Unable to get status information

HI,
i've installed zend core + oracle xe.
However in zend core / system overview section i cannot read any info.
I got the message:
Unable to get status information from the web server.
Either the server-status module is not loaded, or it is not properly configured.
To load server-status module (if your server was not compiled with it),
please insert following string into your apache configuration file:
LoadModule status_module modules/mod_status.so
To configure it, please insert following section:
<Location /server-status>
SetHandler server-status
Order deny, allow
Deny from all
Allow from localhost
</Location>
I've enabled LoadModule status_module modules/mod_status.so
I've added SetHandler server-status to existing /zendcore serve alias
any idea
thanx

Hey,
i've fixed.
However i got this problem with zend core 1.31 windows / oracle xe / apache:
1 - I've removed the old one and apache 2 (last version) 2.058.
2 - Then i've searched all the registry key (apache / zend related) and erased them.
3 - Last step: installed zend core 1.4 (with the bundled version of the apache 2).
It works.
Note: for me you have always to delete all the apache group previous installation as well as the zend directory.
These directory are not deleted automatically by uninstall process.

I just restored my phone, however I have to sign into icloud and the phone is set to the previous owner's email and password. I am unable to get in contact with them. What can I do?

I just restored my phone, however I have to sign into icloud and the phone is set to the previous owner's email and password. I am unable to get in contact with them. What can I do?
Please help!

Hello codyfromseminole,
After reviewing your post, I believe your device is under Activaltion Lock. The following article will provide you with more information about the feature:
iCloud: Activation Lock
With iOS 7 or later, Find My iPhone includes a feature called Activation Lock, which is turned on automatically when you set up Find My iPhone. Activation Lock makes it harder for anyone to use or sell your iPhone, iPad, or iPod touch if it’s ever lost or stolen.
With Activation Lock, your Apple ID and password are required before anyone can:
Turn off Find My iPhone on your device
Sign out of iCloud on your device
Erase and reactivate your device
Important: Make sure to remember your Apple ID and password, and that your password is unique and secure—someone else shouldn’t be able to guess it. For more information, see the Apple Support article Security and your Apple ID.
If you want to give away or sell your device, be sure to erase your content and settings (in Settings > General > Reset > Erase All Content and Settings). When you erase your content, Find My iPhone and Activation Lock are also turned off.
If you no longer have the device, follow the instructions to remove a device you no longer have. For more information, see the Apple Support article What to do before selling or giving away your iPhone, iPad, or iPod touch.
For more information about Activation Lock, see the Apple Support article Find My iPhone Activation Lock in iOS 7.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
DESCRIPTIONS:
This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
INSTRUCTIONS:
1. Run the VI.
2. On the DAQ Configurations tab, specify the sample rate, samples per channel, device and channel configurations, and tachometer channel information.
NOTE: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
3. Switch to Extract Even Angle Reference tab. Specify the number of samples to acquire and the # of revs in reference which determines the number of samples in even angle reference. Click Start to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in Even Angle Reference.
4. Switch to the Remove Slow-roll Errors tab. Click Start to acquire data continuously and view the compensate results. Click Stop in this tab to stop the acquisition.
ORDER ANALYSIS VIs USED IN THIS EXAMPLE:
1. SVL Scale Voltage to EU.vi
2. OAT Digital Tacho Process.vi
3. OAT Get Even Angle Reference.vi
4. OAT Convert to Even Angle Signal.vi
5. OAT Compensate Even Angle Signal.vi
My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
Solved!
Go to Solution.

Hi CracKatoA.
Take a look at the link bellow:
http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
Regards,
Filipe Silva

Hello I have a problem with security questions and i cant reset to my email The error was   Exceeded Maximum Attempts We apologize, but we were unable to verify your account information with the answers you provided to our security questions. You have

Hello
I have a problem with security questions and i cant reset to my email
The error was
Exceeded Maximum Attempts
We apologize, but we were unable to verify your account information with the answers you provided to our security questions.
You have made too many attempts to answer these questions. So, for security reasons, you will not be able to reset password for the next eight hours.
Click here      for assistance.
i waited more than eight hours. and back to my account but it is the same ( no change ) i cant find forgot your answers
http://www.traidnt.net/vb/attachment...134863-333.jpg
can you help me please

Alternatives for Help Resetting Security Questions and Rescue Mail
     1. Apple ID- All about Apple ID security questions.
     2. Rescue email address and how to reset Apple ID security questions
     3. Apple ID- Contacting Apple for help with Apple ID account security.
     4. Fill out and submit this form. Select the topic, Account Security.
     5. Call Apple Customer Service: Contacting Apple for support in your
          country and ask to speak to Account Security.
How to Manage your Apple ID: Manage My Apple ID

TS1702 Playing at Frontline Commando game. Items to be able to give my credit card number I wanted to get 100 gold. My credit card was discontinued but the money did not come to my show gold. I would ask you to provide information with the need. Player-by

Playing at Frontline Commando game. Items to be able to give my credit card number I wanted to get 100 gold. My credit card was discontinued but the money did not come to my show gold. I would ask you to provide information with the need.
<Personal Information Edited by Host>

To Contact iTunes Support and request assistance Click Here

Conflict Resolver Sync Error - Unable to retrieve conflict information from the sync server

So I have been using iTunes with my iPhone 3GS and now my iPhone 4 to sync with my Outlook for many years now and it has been flawless.
I recently bought a new iPad and started syncing it as well.
Now as of late, after every 2 or 3 syncs, I get an error from iTunes displaying the Conflict Resolver and it says there are 42 sync conflicts.
When I try use the Review Now button it shows up and the issues are between my iPhone and Outlook and are only related to contacts.
As soon as I try to choose which record to resolve, the window immediately disappears without giving me a chance to finish and I get another dialog window with the error:
Unable to retrieve conflict information from the sync server.
Please try again the next time the conflict resolver window is presented.
When I try to sync again it seems to be fine. But then after I sync my iPad and theny iPhone again it shows up and it still won't let me resolve the conflicts.
I have tried the following:
1) Rest Sync History on all devices
2) I have had iTunes replace all the contacts on the iPad from iTunes
3) I have changed the conflict resolver to only notify when 50% of the data will be changed
I have had no such luck.
If I add a contact to Outlook or to my iPhone and then sync it seems to be syncing the new addtions correctly. However, I cannot get this issue with this 42 conflicts resolved for some reason. This has been going on for a month now.

Here is the solution.
Rationale: You want to be able to have the dates on your items (notes, contacts) on your iphone to be the same as on outlook. This will eliminate any sync conflicts. You will also notice that if you modify something on the iphone and sync, you will lose the modification you made.
Steps:
1) In outlook, export the data (contacts, notes) to a CSV file
2) Delete you notes/contacts in outlook
3) Sync your iphone and select replace information on this iPhone (in iTunes)
4) Now your contacts and notes will be empty on both your iPhone and Outlook
5) Now import your contacts and notes from the CSV files back into outlook. What this does is put the current date and time on every individual item
6) Sync your iPhone to iTunes normally
7) everything will work correctly now with no sync issues and no conflicts.
Sherali

I am unable to get a connection with my ipad through my router but I am able to get in when at my friend's house

I am unable to get a connection with my ipad with my wifi router. Will I need to upgrade my router

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I have been working on the same numbers file for the past few weeks. The last time I opened it was 1 week ago. Today when I tried to open it I am unable and getting a message that the file is invalid and the index.xml file is missing.

I have been working on the same numbers file for the past few weeks. The last time I opened it was 1 week ago. Today when I tried to open it I am unable and getting a message that the file is invalid and the index.xml file is missing.

Hi Tracie,
I upgraded to Maverick OS X 10.9.5, numbers spreadsheet is saved. Upon re-opening, it appears to be frozen, a warning "file is invalid as index.xml file is missing". I checked, and the file is not "locked". This appears to occur only with using the new numbers app. When I open previous spreadsheets from old iWorks, no such problem occurs.
How did you resolve your problem?
Would appreciate any help here.
Thanks,
Deehay

Unable to establish a session with the Address Book Server

I have installed the following
Sun Java System Messaging Server 7 Update 3
Sun Java System Calendar Server 6.3
Sun Java System Directory Server 6.3.1
GlassFish Enterprise Server 2.1 Patch 2 with HADB support
Delegated Administrator 7
Sun Convergence 1 Update 3
as per the instruction here
http://wikis.sun.com/display/CommSuite7/Sun+Java+Communications+Suite+7+on+a+Single+Host
My problem is that when I open outlook and try to add a new contact, I get a message saying:
Unable to establish a session with the Address Book Server. Contact your server administrator for help or try later.
When using webmail, I can add contacts just fine.
How can I fix this problem?
Thanks
Edited by: Nevron on 26 ??? 2010 11:31 ??

Nevron wrote:
My problem is that when I open outlook and try to add a new contact, I get a message saying:
Unable to establish a session with the Address Book Server. Contact your server administrator for help or try later.Refer here:
http://forums.sun.com/thread.jspa?threadID=5424727
You need to log a Sun support request to get the latest Convergence patch.
Regards,
Shane.

HT5621 how can i unlink an iphone from its previous users email so i can turn it on to my own email address, also i cant get in contact with the previous owner

how can i unlink an iphone from its previous users email so i can turn it on to my own email address, also i cant get in contact with the previous owner

If you are referring to Activation Lock, the password for the Apple ID signed into the device is required, there is no way around this. If you do not have the information and cannot contact the previous owner, the device is useless.

I preordered Nba 2015 and I was supposed to get some DLC with the game.

I preordered Nba 2015 and I was supposed to get some DLC with the game. I never got an email with any dlc. How do I go about getting the preoder DLC, now? Any help would be greatly appreciated.

Hello mjfoster77,
Thank you for pre-ordering NBA 2K15 from Best Buy, and thanks for being a My Best Buy Gamers Club Unlocked member. I hope you've been enjoying your game, but I am sorry to hear you didn't receive your bonus.
We do have a process in place for direct support with gamer codes. If you do not receive your codes, you’ll want to send a message to our Gaming-BBY inbox with the following information:
Message Subject: Game Title & Platform
Message Body: Include...
Proof of purchase (Customer Service PIN from in-store receipt or BestBuy.com order #)
Email address (the one you provided for the code)
One of our gaming specialists will then be able to review your order and determine why you might not have received your pre-order code.
Thanks!
Mike|Social Media Specialist | Best Buy® Corporate
Private Message

StatelessSession Example: We were unable to get a connection to the WebLogic server at t3://localhost:7001

I have seen other related posts on this site but really no answers, the users seem to be left hanging.
Anyway, I am trying to run the statelessSession example, with the WebLogic server running and listening
on port 7001 on the current machine (i.e. localhost).
Here is what I am seeing:
c:\weblogic\myserver\clientclasses>java examples.ejb.basic.statelessSession.Client
Beginning statelessSession.Client...
We were unable to get a connection to the WebLogic server at t3://localhost:7001
Please make sure that the server is running.
System Configuration:
Win2000, WebLogic 5.1, WL Sp2, Java 1.2.2, weblogic home==> c:\weblogic
I have attached the weblogic.log.
Regards,
John

Hello John,
When I first install "weblogic", I am successfully able to run the examples, but after some time which I completely forget how I make them run, I install it again and encounter the same problem as you.
After spending nearly a whole day on restarting computer, viewing ports etc. :) :(, I remember that I make weblogic run from the command line. First, in a console run setenv and startWebLogic tools which are located under weblogic directory and in an another console run setenv again(for possible errors, I want to be sure that it is correct again) and run your client as explained in the tutorials html pages.
As seen, in computer science, simple things, not hard things, always cause you to lose time :)))
Best regards
Banu
"John Pda" <[email protected]> wrote:
>
I have seen other related posts on this site but really no answers, the users seem to be left hanging.
Anyway, I am trying to run the statelessSession example, with the WebLogic server running and listening
on port 7001 on the current machine (i.e. localhost).
Here is what I am seeing:
c:\weblogic\myserver\clientclasses>java examples.ejb.basic.statelessSession.Client
Beginning statelessSession.Client...
We were unable to get a connection to the WebLogic server at t3://localhost:7001
Please make sure that the server is running.
System Configuration:
Win2000, WebLogic 5.1, WL Sp2, Java 1.2.2, weblogic home==> c:\weblogic
I have attached the weblogic.log.
Regards,
John

I'm getting really annoyed with the Mac.

Don't mean to offend geniune Mac fans here, but I'm just getting really annoyed with the Mac.
I purchased my Mac mini (late 2012) in May of 2013 - so it's about 4 months old. I don't have a lot of software on it, mainly the Adobe Creative Suite, and development tools (Xcode, and web development software).
The mini has this annoyance where, every so often it just freezes. It usually happens during when the screensaver is running, or when the monitor goes into standby and I try to wake it up. First the screensaver runs for 15 minutes. Sometimes it happens (it's random) that the screensaver "stalls" and the mac freezes. If it "survives" the screensaver, then after 15 minutes my monitor goes into standby mode. Sometimes when I wake up the monitor, I get the login window, I log in, and then I find that the Mac just froze.
A few days ago I've updated to 10.8.5. Now these freezes are happening more often. The mac freezes just whenever, regardless of screensaver or not. There was a time when I had ReadKit running, displaying an article. I went to the kitchen, when I came back the mini was frozen as ice. No other program was running (I mean program that I started).
Other times I had Chrome open at youtube. It was not playing a video. The browser was just "parking" at youtube's home page. Same thing. I go away, come back, the mini was frozen.
Yet just a few days ago, I had no user started application running. None. I leave the mini alone for a short while, come back, and I find the fan was running like crazy. The mac was not hot at all, but the fan went bonkers. It was loud and pumping air out for no reason.
At these times I can't do anything. Sometimes I can move the window, or move icons on the desktop, but I cannot force quit an app, neither I can start one. So things like going to the apps folder and starting terminal or activity monitor is not possible. I cannot select menu items from the Finder (or any other application) menus, so I can't restart or shut down the mac. The only thing I can do at these times is hold the power button for a few seconds to force the mac to shut down.
I'm coming from Windows. I built and upgraded my PC a few times in the past 7-8 years with newer and faster MOBOs, processors, memory, etc. I never had a bad component; I never had a blue screen; I never had my PC hang; I have never encountered any issues that would make my PC hang or froze or otherwise. I never had to troubleshoot software or hardware problems because they were/are just non existent. I'm not trying to start a war here about PCs and Macs. I'm completely natural.
But here I am with this "thing" that supposed to be so great and trouble free. I have already reinstalled the OS once during this 4 month old mac, but now it seems I have to do it again because ever since 10.8.5 things has gotten worse. This is really N-O-T what I expected from a Mac. I am just really annoyed, frustrated and everything else.
I was browsing these support forums and tried/looked at a couple of diagnostic steps, but none helped so far. I will attempt to reinstall the OS A-G-A-I-N over the weekend. If that doesn't help, then I will have to put this junk into the garbage can. (Well, figuratively speaking of course.)
Mac mini late 2012
OS X 10.8.5
i7 2.6 GHz 8G
Samsung S27B970 display via DisplayPort
Apple extended wired keyboard
Logitech LS1 laser mouse
No other peripherials

Hey thanks for the feedback woodmeister! No, I was not aware of the hardware diagnostics!
So I have eagerly followed the isntructions, but I quickly found out what I have already experienced looking at other Apple "unhelpful" documentation. When I was referring in my OP that I've looked at other resources, the problem was that those "un-support" documents were out of date and the article indicated that Apple has retired them.
Now as far as the link that you sent (and the same can be found in the Help section of OS X as well, wasn't helpful either. Why?
In the document the bullets are as follows:
If you have a new Mac (mid-2013 or later), use Apple Diagnostics, which is built into your Mac.
If your Mac has OS X v10.8.3 or earlier, use Apple Hardware Test, which is built into your Mac.
If you updated your Mac to OS X v10.8.4 or later, use the system software disc or USB flash drive that came with your Mac.
Let's start with bullet #1. As far as I know (and correct me if I'm wrong) but I'm not aware of mid-2013 Mac minis. Mine is late 2012, so I guess I don't fit into bullet #1.
Bullet #2. I have OS X 10.8.5 so it means I don't fit into that bullet either.
Bullet #3. Yes, I did update to 10.8.4 or later (using 10.8.5) but neither a software disc nor a USB flash drive came with the Mac mini late 2012 model.
So what now? Another great "support" document that is confusing and/or not helpful. Nevertheless, I did give it a try. Disconnected my ethernet cable, hold down D, and rebooted. I get a "Choose Network Connection" drop down on the gray screen where I'm supposed to choose a Wi-Fi network. Why? This has not been mentioned in the docs. My Wi-Fi is disabled because I'm connecting through cable.
So I reconnected the cable. As soon as I did that, I got the message that ... let's see... my memory is failing me... the recovery mode or reinstalling the OS will begin... or something along that line. There was NO ANY INDICATION about any hardware test or diagnostics!
See, what I mean about frustration...?

ISE - Unable to get SNMP information with the community

Similar Messages

Maybe you are looking for