ISE used for BYOD and Corporate

Hello
I have a customer currently using EAP-PEAP on both their coporate laptop and wireless phones on different SSIDs, the radius servers are a pair of IAS servers. We have recently deployed ISE BYOD for them with a single BYOD SSID. Now they want to completely get rid of the IAS and move all Radius to ISEs but want to keep EAP-PEAP for laptops and phones.
I am thinking about the authorization rules in the ISE, now they have 3 types of access using EAP-PEAP, a user must at least belong to the Employee AD group, but he may or may not belong to BYOD or/and PHONE groups as well. The authentiation results should be something like:
1. if Corporate Laptop  then Permit Access
2. if BYOD then NSP
3. if Phone then Permit Access
I am just wondering what is the best way to classify the devices (to decide the following action) without relying on profiling, Surely they all come from different SSIDs so I could check the WLAN ID to determine what action to follow, but that will need to make sure all the WLCs have the same WLAN ID for each SSID. Is there any better or neater way of doing this? What is the best practice for this kind of senario?
Thanks

If we're talking purely SSIDs, you can match the name of SSID
For example here, I'm matching a SSID of "mlatosie".

Similar Messages

  • Can you change the units used for size and position in layout editor?

    Hello,
    In Aperture 3.4, does anyone know if you can change the units used for size and position in layout editor?  The page is set in inches, but the image size and position are given in centimetres and I would prefer to work all in inches to create custom layouts.  I can't see any way to change this.  If anyone knows how it would be much appreciated.  Thanks!

    Aperture uses the unit settings defined in the System Preferences.  Set the "Measurement Units" in the "Region" tab of the "Language & Text" preferences to "US"; the Aperture will display the Size & Position in inches, if it is the "Book" layout manager you are asking about.
    Merry Christmas!
    Léonie

  • I accidentally set up two accounts.  One account with my old e-mail address which I've been using for years and has all of my purchases on it.  Now I have a new account with my current e-mail address. How do I disable this new account?

    I accidentally set up two accounts.  One account with my old e-mail address which I've been using for years and has all of my purchases on it.  Now I have a new account with my current e-mail address. How do I disable this new account?  I need to disable the new e-mail address account so that I can add it as an additional e-mail to my old account.  THEN, how do I make this new e-mail address my primary e-mail for this old account?

    Did yoo go to Settings>iTunes and App Stores and sign out and sign back in?
    Next see:
    Frequently Asked Questions About Apple ID

  • Is there a way to consolidate two different Apple ID's into one. I have an old Apple ID that I used for Itunes and a new I used to set up my iphone.

    Is there a way to consolidate two different Apple ID's into one. I have an old Apple ID that I used for Itunes and a new one I used to set up on my iphone.

    You cannot merge accounts.
    Why did you start a new account?

  • When I sync my iphone 4S using iTunes it only syncs 8.5GB of music, not the entore library as specified.  Is there a capcity default limit of the amount of storage that can be used for music and if so how do I change it?

    When I sync my iphone 4S using iTunes it only syncs 8.5GB of music, not the entore library as specified.  Is there a capcity default limit of the amount of storage that can be used for music and if so how do I change it?

    The only limit is that of the device. No restrictions on how much of it you can use for music. Is part of your music library unchecked?
    tt2

  • HT5312 My recovery email is no longer in use, as it hasn't been used for sometime, and now seems to have 'expired', and I do not even recall being asked the security questions,so I can no longer download certain games. Please help.

    I cannot download certain games because I do not recall the answers to my security questions when it asks if I am 17 years or older. In fact, I do not even recall being asked these security questions.
    I tried to guess logical answers but now my iPad is threatening to lock me out. My second email is no longer in use as it has not been used for years and has seemingly expired.
    Can you please help?

    If you don't have access to your rescue email account, or you don't have one on your account (an alternate/secondary email address is a different setting/address), then you will need contact iTunes Support or Apple to get the questions reset (you won't be able to change/add a rescue email address until you can answer 2 of your questions)
    e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
    or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
    When they've been reset you can then use the steps half-way down the page that you posted from to update/add a rescue email address for potential future use

  • How to find out what are the interfaces used for Job and Job Codes

    HI All,
    I just wanted to know how do we find out what are the interfaces used for Job and Job codes .
    Thanks In Advance
    Sunny

    Hi,
    Here is an idea for your request.
    Basically you can create a simple query on multiprovider 0TCT_MC01.
    Filter: you can use a variable for restriction of time ( calday, or calmonth) since you should be interested for a time period.
    Choose following characters into your objects:
    InfoProvider ( 0TCTIFPROV )  - you can create a variable for choosing infoprovider before query runs.
    *Tp.[Type of BI Application Object] 0TCTBISOTYP  = filter this with 'QUERY' or whatever your need is.
    *BI Application Object 0TCTBISBOBJ,  ( this will give you the name of the queries)
    In key figures choose,  Count for BI Appl. (0TCTWTCOUNT).
    (number for query run)
    Create a condition , for top 20.
    Hope this helps.
    Derya

  • After install of Lion, secondary internal hard drive used for backup and time machine is not showing on the desktop.

    After an install of Lion, my secondary internal hard drive used for backup and time machine is not showing on the desktop. Cannot be located with Disk Utility either. Contains vital files! please help...

    I have a TB internal drive, but this is what it shows for memory slots:
    Memory Slots:
      ECC:    Enabled
    DIMM Riser B/DIMM 1:
      Size:    2 GB
      Type:    DDR2 FB-DIMM
      Speed:    800 MHz
      Status:    OK
      Manufacturer:    0x0000
      Part Number:    0x000000463732353642363145353830304600
      Serial Number:    0x00000000
    DIMM Riser B/DIMM 2:
      Size:    2 GB
      Type:    DDR2 FB-DIMM
      Speed:    800 MHz
      Status:    OK
      Manufacturer:    0x0000
      Part Number:    0x000000463732353642363145353830304600
      Serial Number:    0x00000000
    DIMM Riser A/DIMM 1:
      Size:    1 GB
      Type:    DDR2 FB-DIMM
      Speed:    800 MHz
      Status:    OK
      Manufacturer:    0x80AD
      Part Number:    0x48594D5035313241373243503844332D5335
      Serial Number:    0x42076007
    DIMM Riser A/DIMM 2:
      Size:    1 GB
      Type:    DDR2 FB-DIMM
      Speed:    800 MHz
      Status:    OK
      Manufacturer:    0x80AD
      Part Number:    0x48594D5035313241373243503844332D5335
      Serial Number:    0x4207631E
    DIMM Riser B/DIMM 3:
      Size:    Empty
      Type:    Empty
      Speed:    Empty
      Status:    Empty
      Manufacturer:    Empty
      Part Number:    Empty
      Serial Number:    Empty
    DIMM Riser B/DIMM 4:
      Size:    Empty
      Type:    Empty
      Speed:    Empty
      Status:    Empty
      Manufacturer:    Empty
      Part Number:    Empty
      Serial Number:    Empty
    DIMM Riser A/DIMM 3:
      Size:    Empty
      Type:    Empty
      Speed:    Empty
      Status:    Empty
      Manufacturer:    Empty
      Part Number:    Empty
      Serial Number:    Empty
    DIMM Riser A/DIMM 4:
      Size:    Empty
      Type:    Empty
      Speed:    Empty
      Status:    Empty
      Manufacturer:    Empty
      Part Number:    Empty
      Serial Number:    Empty

  • How to change the parameter 'Default Servers To Use For Viewing And Modification' using java api dynamically.

    Hi,
    I need to change the Crystal Reports setting 'Default Servers To Use For Viewing And Modification' to a particular server.this i need to do using java api.
    could you pls provide me the sample code for this.
    Regards
    Srinivas

    The IReport interface extends IViewingServerGroupInfo interface, that allows you to specify the server group. 
    The choice selection for that interface is as follows:  0 = first available, 1 = prefer the selected server group, and 2 =  only use the selected server group.
    The server group selection is by the SI_ID for that server group InfoObject.
    Sincerely,
    Ted Ueda - Developer Support

  • My requirement is to update 3 valuesets daily based on data coming to my staging table. What is the API used for this and how to map any API to our staging table? I am totally new to oracle and apps. Please help. Thanks!

    My requirement is to update 3 valuesets daily based on data coming to my staging table. What is the API used for this and how to map any API to our staging table? I am totally new to oracle and apps. Please help. Thanks!

    Hi,
    You could use FND_FLEX_LOADER_APIS.UP_VALUE_SET_VALUE to upload them from staging table (I suppose you mean value set values...).
    You can find a sample scripts if you google around.
    What do you mean "how to map any API to our staging table" ?
    You should do at least the following mapping (which column(s) in the staging table will provide these information):
    - the 3 value sets name which you're going to update/upload (I suppose these are existing value sets or which have been already created)
    - the value set values and  description
    Try to start with something and if there is any issues the community could then help... but for the time being with the description of the problem you have provided, that's the best I can do...

  • What is SM62 Tcode is used for? and the consequence's for executing it?

    What is SM62 Tcode is used for? and the consequence's for executing it?
    Thank you,
    York

    Hi Les,
    You can goto this URL to understand more about events :
    http://help.sap.com/saphelp_nw2004s/helpdata/en/44/c079239d3756a2e10000000a1553f6/frameset.htm
    http://www.sapfans.com/sapfans/sapfaq/robert.htm
    About my experience working with events:
    In one of my BW Project: we were using AutoSys to do job scheduling (to run InfoPackages).
    To automate the loading process we created events for  each infopackage. Then in that Infopackage we used to select option "Start later in Background" and then select option "After Event". Then specified the event name and parameter.
    Then in the same infopackage we selected button "Subsequent Process" the in that seelct option "Trigger Events" Here you can have options to specify if this event is successful then what next event to trigger and if this event fails what next event to trigger.
    So this way we used to automate data loads.
    This was dont caz there was no process chains concept during that time. So good example of events and event based process are PROCESS CHAINS.
    Hope this helps !!
    Assign points if helps !!
    Regards,
    Naveen Rao Kattela

  • Appleworks does not work with mountain Lion.  What can I use for drawing and painting?

    Appleworks does not work with mountain Lion.  What can I use for drawing and painting?
    MacBook
    Marian

    Please see this article which examines various possible alternatives to AppleWorks:
    http://rfwilmut.net/aw

  • Why when I try to update certain app it require an old email address and password I have not used for years and I do I get to update them on my new details

    Why when I try to update certain app it require an old email address and password I have not used for years and I do I get to update them on my new details

    Apps are tied to the Apple ID that was used to purchase them and you will always need to use that ID and password in order to update them.
    Saying that you do get to update them on your new details makes no sense at all.

  • I have a macbook pro I use for work and iMac at home. What is best way to manage my files? Use iCloud? Dock my laptop when I come home? Appreciate any suggesitons

    I have a macbook pro I use for work and iMac at home. What is best way to manage my files? Use iCloud? Dock my laptop when I come home? Appreciate any suggesitons

    That depends on what kind of "files" you're talking about and what your employer's policy is on using cloud storage.
    I found dropbox and/or OneDrive work very well for keeping documents in sync between multiple machines.

  • What do I use for organizing and editing photos on the IPAD especially if I am importing directly from a camera?, What do I use for organizing and editing photos on the IPAD especially if I am importing directly from a camera?

    What do you use for organizing and editing photos that you have imported from a SD card or camera? 

    Go to the iTunes App Store in the iTunes app on your computer. Type photo into the search window in the upper right corner and you will bring up all sorts of photo apps, free and paid, for enhancing, modifying, arranging, printing and sharing photos on an iPad.

Maybe you are looking for