ISE WebAgent not able to download with error Failed to download Cisco Agent ( Status = -2) !

Hi
We are able to get till WebAgent download page and while downling WebAgent we get below error...
Failed to download Cisco Agent ( Status = -2) ! . We tried with many laptops and for all we get same error while downloading the WebAgent ...
We also verified Latest Java & ActiveX components available on every laptops which we used for downloading WebAgent..
Attached the Screenshot of the WebAgent Download process
DACL Posture_Remediation used is as below
permit udp any any eq domain
icmp any any
permit tcp any host <PSN IP Address> eq 8443
permit tcp any any eq 80
permit tcp any any eq 443
permit tcp any host <PSN IP Address> eq 8905
permit tcp any host <PSN IP Address> eq 8909
permit udp any host <PSN IP Address> eq 8905
permit udp any host <PSN IP Address> eq 8906
permit tcp any host < Remediation Server> eq 80
Even we add permit ip any host <PSN IP Address> ,as last acl rule in DACL , still we were getting same error while downloading ...
Did any face the same issue , how it was resolved

This is seen when the required traffic is not allowed on the ACL.
ISE 1.1.1 added ports 8909 TCP and UDP for client download so we needed to add this into the Posture ACL.
permit tcp any any eq 8909
permit udp any any eq 8909
If you have clients with proxy failing to get the redirection then you should add 8080 to the switch.
ip http port 8080
ip port-map http port 8080
On the redirect ACL
permit tcp any any eq www
permit tcp any any eq 443
permit tcp any any eq 8080
I see you've already tried with permit ip any host
Jatin Katyal
- Do rate helpful posts -

Similar Messages

I am not able to connect with Itunes Match. I constantly receive the message error 4010

I am not able to connect with Itunes Match. I constantly receive the error 4010.

I can run the general "Update iTunes Match" from the menu but cannot add individual tracks by right-clicking (control-clicking) on them the way I usually do. Then I get the 4010 error message.
Based on other posts here, I can assume the problem is not just me.

Not able to connect with Sql Server Database

Hi,
I'm not able to connect with Sql Server database.during making connection I'm getting the following error:
"Status : Failure -I/O Error: SSO Failed: Native SSPI library not loaded. Check the java.library.path system property."
Please help
Regards,
Neeraj Goel

Hi,
I'm using Sql Server 2000.
I downloaded the driver from the given site and still having the same problem. Do I need to copy the driver file in some specific folder.
Regards,
Neeraj Goel

Datareader is not able to connect with database-Urgent

Hi All,
All of a sudden the Datareader component in my ML experiment is not able to connect with database with the following error:
[ModuleOutput] DllModuleHost Error: 1 : Program::Main encountered fatal exception: Microsoft.Analytics.Exceptions.ErrorMapping+ModuleException: Error 0000: Internal error ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.ArgumentException: The value's length for key 'password' exceeds it's limit of '128'.
Module finished after a runtime of 00:00:00.2031339 with exit code -2
Module failed due to negative exit code of -2
It complains about the password being long-but the same credentials I have been using for the last 2 months and still able to use it to run sql queries on that same database using the management portal.
It appears that Azure encrypts the password and that encrypted password is too long...just my guess after looking that the output.Inside Ml it just says as internal error
Would appreciate if someone can point to the issue at the earliest...(There is a demo early next week)
Subscription:Enterprise,
LOCATION: East Asia
Regards,
Biswajit

Hi,
Please check this url:
https://studio.azureml.net/Home/ViewWorkspace/bc85d4f81d2246c4b1430eb395229a3a?&hashSeg=#Workspaces/Experiments/Experiment/bc85d4f81d2246c4b1430eb395229a3a.f-id.11776ae4400f4c1aa9f58308c30810fa/ViewExperiment
which is an experiment which I created doing save as of the experiment in which the data reader works.
I stripped everything except the data reader and setup the rest of the components...I finally have to write the results back ,so also pulled a Writer component.
Now,the data reader works fine..but the Writer fails:
Error 0071: Incorrect username "acnadmin" or password is passed
Strangely,its the same credentials set in the DataReader.
Looks like all the DataInput/Output components created recently only have the problem.
Once again,while the datareader in this case passes the password in plain text,the writer encrypts,hence fails.

Not able to connect with iTunes

its has been 6 days already and i am not able to connect with itunes to purchase something.
i have used visa and mastercard and i also have money credited to my account.
please help!

Hello FoxyNix
Check out the steps below to troubleshoot you issue with connecting to the iTunes Store on your iPhone
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.  Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular. Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
Regards,
-Norm G.

Good morning, AdobeSuite installation does not work and I receive"error initializing program, download adobe advisor" error message. On Adobe site it appears"The Adobe Support Advisor has been discontinued The Adobe Support Advisor tool was used to analy

Good morning, AdobeSuite installation does not work and I receive"error initializing program, download adobe advisor" error message. On Adobe site it appears"The Adobe Support Advisor has been discontinued The Adobe Support Advisor tool was used to analyze installer log and system information associated with installation errors. The tool has been replaced with improved installation support mechanisms. Please visit Adobe Support section for Knowledge base articles around Installation."

Nobody can tell you anything without proper system info or other technical details. We don't even know what exactly you are trying to install.
Mylenium

TS1539 How do we deal with Error 50 when downloading a movie rental then stopped with error 50 and when I try to resume the downld, it doesn't do it?

How do we deal with Error 50 when downloading a movie rental then stopped with error 50 and when I try to resume the downld, it doesn't do it?

Yeah this "fix" is bunk. The movie is downloading just fine, but the extra features is the one giving me this error code. It is NOT my firewall. If it was, then both files wouldn't download. Plus, I already have the firewall "issue" tacked down and fixed. Have had it fixed for months now. No, this is due to the "new" itunes version 11 software. The only conclusion to fix this issue is UPgrading from 11 back to 10.7 which is what I am going to do. This is completely ridiculous! Come on, Apple, get itunes working once and for all, and fire the people responsible for itunes 11, just like you did to the guy who was responsible for apple maps. Thankfully Google came back to the rescue with google maps app.

How do you deal with error message when downloading movie on iPad? It was 75% complete.

How do you deal with error message when downloading movie on iPad2. Movie was 75% complete.

I was using wifi. It shows as a purchase on iTunes but it does not show up on iTunes for download. I keep getting the download error with our a number attached on the iPad. Very frustrating. Apple has been of no help at all.

Iphone 3g not able to Sync with Itunes

Hello,
I have iphone 3g with OS 2.2.1 and itunes 8.1
I m not able to sync with i tunes.
Whenever i connect phone, Itunes get hung .
Sometimes it displays foll message:
Itunes was unbale to connect iphone because it recieved an invalid response.
If i restart and connect it gives
Unable to Load Dataclas information for the iphone.Try reconnecting.
I did every thing
De-install,Re-install each and every thing based on suggestions at various places,still no use.
Even tried Syncing with Other OS XP , same problem-> Itunes gets hanged.
Im absolutely clueless about whats happened.
Somehow i was able to update the OS to 2.2.1 .
Dont know where the problem is....
Can any problem with Hardware lead to Such error..If yes..What are the probable hardware reasone...
Software wise i dont think anything is left unchecked,still any suggestions, help welcome..
Im really in need to sort this out as cant sync anything..the phone is blank wiht complete HDD free....No use.....
Please Please Please Help..!!!!!!!!!

As I read you updated your iPhone to 2.2.1. That means that maybe this cause the problem.
Sometimes when I connect my iPhone to iTunes I saw the message what says that "iTunes was unable to connect to the iPhone... " but if I reconnect my iPhone then iTunes recognize my phone and everything is OK.
If the reconnecting does not help you then I advise that reset your iPhone with 'Erase All Data and Settings'. Settings > General > Reset > Erase All Data and Settings.
If you reset your iPhone with 'Erase All Data and Settings' then your iPhone will delete your files and also the 2.2.1 software update and after that it will run with the original software what you bought with it.
The reset takes approximately 2 hours. And this is delete everything from your iPhone.
So, as it seems you can't back up your iPhone, that means everything what is on your iPhone will be deleted except if you don't have them on your computer.
After you reseted your iPhone, try to connect with iTunes. If it won't works then try it on an another Mac or PC and if you can't sync your iPhone at all, you have to take your iPhone to your carrier for a service.
Important note: After you reseted your iPhone, it will please that connect to iTunes to activate the phone. If you can't connect to iTunes your phone, you won't be able to use it!
As you know, without activating you can't use the iPhone.
If you can do the activation then you probably will be able to sync it.
If you can't be without mobile phone and just the iPhone what you've then don't do that until you maybe could miss your phone (I mean if you iPhone have to be serviced).

Not able to Login with PS

hi folks, i am not able to login with PS/PS in the Datamover and app desingner. It gives me the errore that the user name is not valid. My psdbowner table does not have any entry about the owner of my DB even after running the dbowner.sql. i tried to update this table but it gave me the message that no rows updated.

<s>SYSADM is nothing but an Oracle user, when connecting with this user in DataMover, it's bootstrap mode. PS is different, whether it's an Oracle user, it should be locked, PS is also an application user (should exists in PSOPRDEFN). The latter is used when connecting to DMS/AppDesigner.
1. Check the connectivity properties in Configuration Manager: connectid=people, connect password=peop1e
2. Try to connect onto the database with people and check if you can select from tables PSACCESSPRFL, PSOPRDDEFN and PSDBOWNER
3. From within the database, check the owner of the table PSDBOWNER (should be PS which must be locked).
And please, try to give the answers to the questions above (what update statement...). If that's a fresh install, or you've missed some steps, or something went wrong during the initial load (check the logfile).</s>
Due to the lack of information, I was going to the wrong way. Fortunately for Hick, Hakan rightly pointed out the step of the installation. And yes, PS Oracle user account is locked and nothing wrong to have PSDBOWNER empty at this stage, it is filled up when load the very first dms (there's a statement like INSERT INTO PS.PSDBOWNER VALUES...). I think some documentation reading here should not hurt.
Sorry, but I'm really fed up with people providing too few information (or no information at all) about their situation. I give this thread up.
Nicolas.
Edited by: N Gasparotto on Jan 15, 2013 1:30 PM

Not able to login with Firefighter ID

Hi,
I configured the SPM and was able to test the firefighter login in our sandbox. Recently we upgraded from SP5 to SP8, since then I am not able to login with the firefighter id. When I try to access the "Security" tab in /n/VIRSA/VFAT I am getting the error messge " These settings are NOT required anymore. with Message no. /VIRSA/VFAT710 ".
Any idea what might have changed and where should I look to fix this. Appreciate all your help.
Thanks,
Raj

Hi,
There was some security leak in the previous design of Firefighter in which we used to maintain the password in security table.
So to overcome this issue, there is no need to maintain the password in security table as the logic has been changed by which the FFID login.
So from SP07 onwards there is no need for security table.
Regards,
Shweta

Automation engine is unable to playback the test because it is not able to interact with the desktop : Unsing VS2012 on Remote Desktop, Window not Minimized

Hi
I am running these tests using VS2012 on a remote desktop. The session is alive when I try to run it. The Window is not minimized.
The tests run fine on my own machine. The VM has test agent and controller installed on it, but I am not using them right now to run the tests. Do you know what setting on my machine might casue this issue ?
Stack trace:
Test Outcome: Failed
Test Duration: 0:00:00.6287248
Result Message: Error calling Initialization method for test class <TestClassName> Microsoft.VisualStudio.TestTools.UITest.Extension.UITestException: Automation engine is unable to playback the test because it is not able to interact with the
desktop. This could happen if the computer running the test is locked or it’s remote session window is minimized.
Result StackTrace:
at Microsoft.VisualStudio.TestTools.UITesting.UITestLogGenerator.ExceptionRecorder(Exception exception, Boolean rethrow)
   at Microsoft.VisualStudio.TestTools.UITesting.Playback.ThrowIfScreenLockedOrRemoteSessionMinimized()
   at Microsoft.VisualStudio.TestTools.UITesting.Playback.Initialize()
   at Microsoft.VisualStudio.TestTools.UITesting.CodedUITestExtensionExecution.BeforeTestInitialize(Object sender, BeforeTestInitializeEventArgs e)
   at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestExecution.RaiseBeforeTestInitialize(BeforeTestInitializeEventArgs args)
   at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestExecuter.RunInitializeMethod()

Hello,
Thank you for your post.
“The VM has test agent and controller installed on it, but I am not using them right now to run the tests.”
In this case, how do you run the Coded UI test on the VM? You start the Coded UI test from your own machine and then open the remote desktop session to make the test run on VM?
If yes, I am afraid that you can’t do like that. You need to use the test controller and the agent in order to run the test on the remote desktop. Or you create the app and do coded UI test against it on the VM completely.
If I have misunderstood anything, please feel free to let me know.
Best regards,
Amanda Zhu [MSFT]
MSDN Community Support | Feedback to us
Develop and promote your apps in Windows Store
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Generic service 'Analysis Services (TEST1)' could not be brought online (with error '1060') during an attempt to open the service. Possible causes include: the service is either not installed or the specified service name is invalid.

Hi,
We have a cluster with 2 nodes. Everything works fine in Node1. When I try to failover TEST1 database to Node-2 it fails with this message.
Generic service 'Analysis Services (TEST1)' could not be brought online (with error '1060') during an attempt to open the service. Possible causes include: the service is either not installed or the specified service name is invalid.
Any help is much appreciated.
Thanks

Hello,
The error message is pretty straight forward, it's saying either the service isn't installed or it's not installed as the same service on that node. Did you install analysis services on the second node (from the error it seems like it isn't)?
Sean Gallardy | Blog |
Twitter

I am not able to connect with another ipod via bluetooth can u pls help me

i am not able to connect with another ipod via bluetooth can u pls help me

Are yo trying to pair via an app that supports BT pairing? If you are I would try:
- Resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
-Resetting network settings on the iPod: Settings>General>Reset>Reset Network Settings

BAPI not able to connect with Livecache

Hello All,
   I am using "BAPI_PIRSRVAPS_GETLIST" .
   But not get pegging detail. When I debug it is not able to connect with livecache.
   How to use BAPI FM in Program, How to connect with livecache ?
   Anybody has sample ABAP program for this ?
Thanks in Advance
Amisha

Hi All,
When I try to use BAPI <b>BAPI_PIRSRVAPS_GETLIST</b> I am not getting pegging information, please help me.
Thanks,
Srinivasa.

ISE WebAgent not able to download with error Failed to download Cisco Agent ( Status = -2) !

Similar Messages

Maybe you are looking for