ISetup for use with User Management / Resources - Roles and & RBAC

Hi,
I have a requirement to migrate Instance Sets, Roles, Grants to Roles etc. Basically, lots of stuff from the "User Management" OAF pages.
Is it possible to use iSetup for this, or is there an alternative?
Thanks in advance.

Hi Mugunthan ,
sorry, should have mentioned that on my original post. We are on 12.1.1 on all target and source environments. Can you point me in the direction of some doco for creating the sets?
Supplementary question: Is it possible to export the custom selection set into an artefact, like a file or something that can be stored in version control? Ultimately, I would like to use isetup to manage the export of these artefacts and then use "a" backend version of isetup, similar to the jrad tools for importing XML documents. Does any backend functionality exist? I presume it's API based?

Similar Messages

  • ISetup for use with Oracle Incentive Compensation (OIC)

    I have read conflicting reports as to whether or not iSetup would be available for use to migrate Compensation Plans (and all other OIC configurations) across instances of Oracle Apps eBusiness.
    Does anyone know if R12 (12.04) is capable of handling OIC migrations? Is there any documentation available as to how one would configure iSetup for use with OIC?
    Thanks in advance.

    Hi,
    This is Mugunthan from iSetup development. OIC is not covered as a part of standard selection sets shipped by Oracle. You may consider logging a SR (product code - 841) to get the coverage.
    If you already have java program/scripts that migrate OIC, then you can plugin them with iSetup. You can also write your own BC4J APIs for migration of OIC setups and register with iSetup.
    To know more about writing BC4J iSetup Fwk APIs, please log a SR.

  • Not able to create OUT file with "nidll_vxworks" in Matlab for use with the LabVIEW SIT 2010 and a cRio 9073, sh.exe error

    I am trying to compile an OUT file for my Simulink model using "nidll_vxworks" and run it using the Simulation Interface Toolkit for a cRIO 9073 . I am able to compile the DLL file using "nidll" and succesfully run the simulation using my PC as the host.
    I already downloaded the "gccdist" and "vxworks61gccdist" folders and copied them to "c:" When I build the model in Sumulink I get the following error at the end of the process (at the same time windows tells me that "sh.exe" has stopped working). If it matters I am running Windows 7 64bits, but using Matlab 2009b 32bits and LabView 2010 32 bits. ANY HELP WILL BE APPRECIATED. "QofV" is the name of my Simulink model and I changed to "XXX" parts of the file path.
    ### Linking ...
    rm -f "QofV.out" ctdt.c;nmppc QofV.o QofV_data.o rtGetInf.o rtGetNaN.o rt_logging.o rt_look.o rt_look1d.o rt_nonfinite.o  nidll_main.o rt_sim.o ode8.o    | tclsh c:/gccdist/WindRiver/vxworks-6.3/host/resource/hutils/tcl/munch.tcl -c ppc > ctdt.c 
    abnormal program termination 
    C:\Users\XXX\AppData\Local\Temp\make426012.sh: fork failed: no child processes [1]
    make: *** [QofV.out] Error 1 
    ### Real-Time Workshop build procedure for model: 'QofV' aborted due to an error.
    >> 
    ### Linking ...rm -f "QofV.out" ctdt.c;nmppc QofV.o QofV_data.o rtGetInf.o rtGetNaN.o rt_logging.o rt_look.o rt_look1d.o rt_nonfinite.o  nidll_main.o rt_sim.o ode8.o    | tclsh c:/gccdist/WindRiver/vxworks-6.3/host/resource/hutils/tcl/munch.tcl -c ppc > ctdt.c  
    abnormal program termination 
    C:\Users\XXX\AppData\Local\Temp\make426012.sh: fork failed: no child processes [1]make: *** [QofV.out] Error 1 ### Real-Time Workshop build procedure for model: 'QofV' aborted due to an error.>>
    ### Linking ...rm -f "QofV.out" ctdt.c;nmppc QofV.o QofV_data.o rtGetInf.o rtGetNaN.o rt_logging.o rt_look.o rt_look1d.o rt_nonfinite.o  nidll_main.o rt_sim.o ode8.o    | tclsh c:/gccdist/WindRiver/vxworks-6.3/host/resource/hutils/tcl/munch.tcl -c ppc > ctdt.c  abnormal program termination C:\Users\XXX\AppData\Local\Temp\make426012.sh: fork failed: no child processes [1]make: *** [QofV.out] Error 1 ### Real-Time Workshop build procedure for model: 'QofV' aborted due to an error.>> 
    Solved!
    Go to Solution.

    Hello jarcTec,
    I am not sure right now if you can do it, but this tutorial might help, also everything was made in Winddows 7 in this one.
    http://zone.ni.com/devzone/cda/tut/p/id/11654
    Take a quick look and let me know if it works!!!
    Luis Fernando
    National Instruments Cono Sur
    Ingeniería de Campo y Consultoría
    http://chile.ni.com/

  • Newest Video Cards for use with both Premiere Pro CS6 and CS4

    Hi, I am currently using PPCS4 and just upgraded to PPCS6. On one system I'm running a GTX 285 and on the other Quadro 2000. Can you tell me which new graphics card in each catagory will be able to run both CS6 and CS4 as I have many programs still setup in CS4? I tried tech sipport with no answer from them. I looked over GTX 570 or 580 for one system and Quadro 4000 for the other but I still have reservations if there will be a problem or not with CS4. Can you help me. I'm running Windows 7 Pro 64 bit, both systems are running Intel core i7's, one with 24gb ram and the other with 16gb ram. Thanks

    CS4 does not really use any advanced features of any card... so a relatively inexpensive AMD/ATI card will do anything a more expensive card will do... for CS4
    Starting with CS5 (a complete rewrite of the source code, to go from 32bit to 64bit, plus a LOT of other changes) an nVidia card helps with some actions
    http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
    For a list of supported nVidia CUDA cards go to the CUDA help page - http://forums.adobe.com/thread/773101
    For many others, with at least 1Gig of video ram, use the nVidia Hack http://forums.adobe.com/thread/629557 - which is a simple entry in a "supported cards" file
    Which nVidia card you buy will be a combination of 2 factors... how much $$ you want to spend for a given speed level (number of Cuda cores) and the size of your power supply to drive the card
    For a PARTIAL comparison of nVidia cards http://www.pacifier.com/~jtsmith/GPU.HTM

  • SPA112 use with Call Manager

    We have used ATA 186 devices with our Call Manager system for use with fax machines and analog phones in a manufacturing environment.  I am hopeful that the SPA112 can be used as a lower cost alternative to the older ATAs.  
    I have searched for basic configuration information for use with Call Manager but haven't come across anything. 
    Can these devices be used with Call Manager and is there basic information available on how to configure them?
    Thanks.

    The SPA112 is essentially the same as the Linksys PAP2t adapter.
    They both use SIP protocol, and can be added to Callmanager, but I don't think the SPA112 is supported in this configuration.
    I was able to get the SPA112 to work with CallManager by adding it as an Advanced SIP device.  That uses more licenses (6 I think).
    https://supportforums.cisco.com/thread/2082101
    That details getting a Linksys PAP2 device working with CallManager 7.1
    I got SPA112's working by using the info in that link.  You have to set it all up manually, but it does work.

  • USB portable ext. HD for use with MBP & FCE????

    I've seen a 120 GB USB portable external Seagate HD for $117. Would this be usable as a scratch disk for use with my MBP 2.0 and final cut express HD 3.5. Are there problems with using USB externals? FW external hd's seem to be a good deal more expensive.
    This may belong in the FCE forum but I thought someone here that uses an MBP might have specific experience with it.
    Thanks.
    Maurice

    I use a Seagate 160GB 2.5" 5400 external as mirror/scratch partitions and it works OK however, if I'm capturing at high res I usually write to the internal drive (that's running at 7200) to avoid any frame loss ...

  • USB external portable HD for use with FCE and MBP ???????

    I've seen a 120 GB USB portable external Seagate HD for $117. Would this be usable as a scratch disk for use with my MBP 2.0 and final cut express HD 3.5. Are there problems with using USB externals? FW external hd's seem to be a good deal more expensive.
    Thanks.
    Maurice

    I bought one recently very cheaply to use for general storage.
    I found that FCE 3.0 worked perfectly and have been using it ever since instead of my FW HD.
    HOWEVER, before you dash out and buy one take note that I have only been tinkering around and experimenting with comparatively short projects of no importance.
    I strongly suspect that if I made a long and complicated film I might suffer - so pay the extra and get a FW HD !
    Incidentally for normal storage purposes the USB2 HD takes over twice the time to move files back and forth. So even for non-FCE use the Firewire HD is twice as fast.
    Ian.

  • How do I do this to use OVerdrive media on deviceThe Apple device must be formatted for use with Microsoft Windows.  The iTunes setting 'Manually manage music-' must be enabled for the device before you can complete the transfer.

    I cannot make these directions work
    I downloaded media on Overdrive MEdia on my PC
    I have the overdrive media ap on my I pod touch 4g
    this media is suppossed to be compatible w/I pd touch
    Notes on Transferring OverDrive MP3 Audiobooks…
    Most MP3 capable devices should play OverDrive MP3 Audiobooks.
    If you intend to transfer OverDrive MP3 Audiobooks to an Apple® device, note the following…
    iTunes® v9.0.2 (or newer) is required.
    The Apple device must be formatted for use with Microsoft® Windows®.
    The iTunes setting 'Manually manage music…' must be enabled for the device before you can complete the transfer. Adjust this setting in iTunes as follows…
    Connect the iPod® to your computer.
    If it does not launch automatically, open iTunes v9.0.2 (or newer).
    In iTunes, locate the device in the left vertical navigation panel (under heading 'DEVICES'), and click the device.
    The 'Summary' screen is displayed. 
    Place a checkmark next to 'Manually manage music…'.
    Click the 'Apply' button.
    The iTunes 'Summary' screen refreshes, and the changes are saved.
    If desired, close iTunes.
    Note that if an Apple device is connected to your computer, you can choose to simultaneously transfer a title to the iTunes Library and the Apple device. If you wish to only transfer a title to the iTunes Library, you must first disconnect the Apple device

    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
    Also you said " I want to add them to my iCloud, and also back to my computer.   " Note that unless  subscribe to iTunes match, only iTunes purchases are stored in iCloud.
    Also,
    You can redownload most iTunes purchases by:
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • User's default email address for use with Answers

    How to use user's default email address for use with Answers?
    When I was referring to the Admin Guide I found the below description for email session variable.
    Can somebody please help me with this.
    Contains the user's default email address for use with Answers. If the delivery option of Answers is enabled, an email device using this address will be created for the user upon first log in. Users can override this address by changing their account settings in Oracle BI Presentation Services.
    Thanks,
    Swetha

    I think the documentation is wrongly saying that it will be used by Answers. The email will be used by Delivers, the BI Scheduler component.

  • I need to connect a Micro SD Card to my MacBook (10.6.8) 2011 so I can switch my Magellan RoadMate GPS for use with the new Mac Content Manager from Magellan. Can I do this? from

    I need to connect a Micro SD Card to my MacBook (10.6.8) 2011 so I can switch my Magellan RoadMate GPS for use with the new Mac Content Manager from Magellan. Can I do this? from

    Hi Robert and welcome to Apple Discussions,
    There are adapters available that convert micro cards into fullsize ones.
    You will also need a USB card reader if you do not have one.
    Good luck,
    Alan

  • Pls help on error on ereader "this document is protected by DRM ( adobe digital rights management ) and is not currently authorized for use with your adobe id

    how do i solve this in order for the e reader to open the file?“this document is protected by DRM ( adobe digital rights management ) and is not currently authorized for use with your adobe id
    thnaks

    This is something you will need to talk to the publisher of the document. They might have to do something to allow you to open the file. (If you changed Adobe ID since buying the file, for instance, they might have to allow for that).

  • Error erase Queries in Query Manager- The query is used with user-define...

    Hello Experts
    I have deleted a User Field that had a Formatted Search and now I can not remove it because it is linked according to a UF, the error message is as follows:
    "The query is used with user-defined values [Message 952-23]"
    There will be a way to resolve this issue???
    Thanks in advance

    Hi Juan,
    I have tried this very limited, but the formid, is this a number in your case?
    SELECT * from cshs t0 inner join ouqr t1 on t0.queryid = t1.intrnalkey
    where t1.qname = '[%0]'
    Running this query I can get the form id that I need to recreate, but I have a feeling you already know the form id, is this correct?
    - Is there an error when you try to recreate the form id?
    - Will it not let you recreate the same form id because the id is given by the system?
    If it is not possible to recreate the form id, please prepare a backup and log a message. Support should be able to correct the entry in table cshs.
    Hope it helps.
    Jesper

  • Unsure about preparing a Dreamweaver Site for use with Contribute

    Recently I designed a small Dreamweaver Website (DW CS2) for
    a friend and it is already successfully online. So that my friend
    can manage her own website, I`ve decided to prepare this DW site
    for use with Contribute, but I'm unsure about the steps involved
    and what files I will need to store on the server. Is the following
    roughly correct?
    Step 1: Define editable regions in these html files and save
    these as html files.
    Step 2: Enable Contribute Compatibility in DW before I upload
    to the server.
    Step 3: Is setting up a Connection Key necessary for my
    friend`s access?
    Step 4: Upload these. Do these completely overwrite the
    existing Dreamweaver html files on the server? Or should I be
    saving in another file format?
    Many thanks to anyone who can advise me!

    I sugggest these steps:
    A: Dreamweaver:
    1. build you site based on (a) template(s) with editable
    regions
    2. upload the website to the server
    B: Contribute
    1. create a connection
    2. administer the website ( and create an admin password )
    3. set the proper settings for your users (administrators,
    publishers, writers), enable rollbacks
    4. create a connection key fot you user with the proper role
    and save that to disk
    C: Dreamweaver
    1. manage the site in dreamweaver
    2. enable contribute compatibility (this way files get
    checked in and out, so you know who is editing what)
    D:
    1. Sent the connection key to your user

  • Collection query for computers with windows management framework 3.0

    Hi,
    collection query for computers with windows management framework 3.0, but I cant found a way. I cant see that it is in the inventory data for SMS_G_System_ADD_REMOVE_PROGRAMS_64.DisplayName.
    So any way to get computers with windows management framework 3.0?
    /SaiTech

    select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_SoftwareProduct on SMS_G_System_SoftwareProduct.ResourceId
    = SMS_R_System.ResourceId where SMS_G_System_SoftwareProduct.ProductName like "Windows Management Framework 3.0%"
    That won't work because as mentioned, it doesn't appear in ARP.
    Torsten's suggestion will work or you can resort to software/hardware inventory using the info at
    http://serverfault.com/questions/555100/methods-to-detect-version-of-windows-management-framework
    Jason | http://blog.configmgrftw.com

  • Getting Login error while working with User Management

    Hi,
    I am new to EBS and learning to work with 'User Management'.
    I have EBS 11i installed on XP.
    I face following error message when try to open any screen in 'User Management' responsibility...
    *'This type of function cant be performed without logging into E-Business Suite Home Page'....*
    This error is strange for me because i login with SYSADMIN and then choose 'User Management' responsibility.
    Thanks in advance for any helpful hint.
    Regards,
    Sohail.

    Hi,
    I face following error message when try to open any screen in 'User Management' responsibility...
    *'This type of function cant be performed without logging into E-Business Suite Home Page'....*Please mention the navigation path to reproduce the issue.
    Also, please check Apache log files for any errors.
    This error is strange for me because i login with SYSADMIN and then choose 'User Management' responsibility.Please see (How to to Define an Application User That Has All The Priviledges in User Management Responsibility options As SYSADMIN User [ID 378262.1]).
    Thanks,
    Hussein

Maybe you are looking for