ISG not create a session for specific pepoles

Hi All;
I have an ASR 1k running as ISG and DHCP server.
I used an initiator for the session as MAC address.
Today I found unexpected behavior as for some users used to work before to have IP address and no session created.
this configuration on the interface :-
interface Port-channel1.12
encapsulation dot1Q 112
ip address 10.0.0.1 255.255.255.0
service-policy type control EAP-AP
ip subscriber l2-connected
initiator unclassified mac-address
Any help in That.
Thanks
AbdelGalil Farid

Hi,
you can create new DISABLED monitor in new management pack.
After that you will enable this monitor for specific servers using overrides.

Similar Messages

Help to create a monitor for specific non-windows ID generated by script

Hello all,
Do you know how to create a monitor for specific event ID (4,5,6,7 & 8) in SCOM (with alerts) I know how to create a monitor but not how to create it for specific servers. I would like to copy those monitors in the Management Pack that I override (because
the original was locked).
Thanks for your help.

Hi,
you can create new DISABLED monitor in new management pack.
After that you will enable this monitor for specific servers using overrides.

Create a session for a web service in jdeveloper10g

Hi All,
Question 1: How to create a session for a java web service created in jdeveloper10g.
Question 2: How to restrict a particular user for accessing a java web service.
I have done this by using key store. But when creating the java web service client, again we have to configure the key store, which should not happen in my case. Hence i like to create a method for login in a web service, create a session id for the user if he is a valid user and send the session id back to web service client. Using the session id they can access other methods in the web service.
Can any one suggest how I can accomplish this. Thanks in advance.

I don't know this can be disscussed or not.
Please delete my topic if this can't be disscussed here.
Thank you.

DRM-61026: Unable to create user session for the following reason: Login failed. Invalid user name or password.

All Im very new to Oracle DRM and Im trying to get the app setup on Windows server running SQL Server 2008. When I try to login to the Web Client I keep getting this error.
DRM-61026: Unable to create user session for the following reason: Login failed. Invalid user name or password.
Can you please help

This might be due to The 'Oracle Instance' path may not have been set to a path relative to the 'CSS Bridge Host' (i.e. the Foundation Services machine) on the Configuration > Host Machines > CSS > General tab of the DRM Configuration Utility.
if this is the case then
1. Open the DRM Configuration Console.
2. Go to the Configuration > Host Machines > CSS > General tab of the DRM Configuration Utility.
3. Ensure that the path in 'Oracle Instance' has been set relative to the 'CSS Bridge Host' (i.e. the Foundation Services machine defined in 'CSS Bridge Host').
4. If corrections are made to 'Oracle Instance' then restart the DRM services to pick up the change.
Thanks,
~KKT~

Enable to create ldt file for specific program using FNDLOAD submit request

hi ALL ,
i am trying to create .ldt file for specific program but the things is that following program creating .ldt file for all the program which are available on instance .
please suggest me if i did anything wrong in my code ...
DECLARE
req_id fnd_concurrent_requests.request_id%TYPE;
BEGIN
fnd_global.apps_initialize (user_id => 1012001,
resp_id => 20420,
resp_appl_id => 1
req_id :=
fnd_request.submit_request
(application => 'FND',
program => 'FNDLOAD',
description => NULL,
start_time => NULL,
sub_request => FALSE,
argument1 => 'DOWNLOAD' ---Mode - UPLOAD
argument2 => '@fnd:patch/115/import/afcpprog.lct'
-- -LCT File
argument3 => '/tmp/concqueues.ldt' -- -
argument4 => 'PROGRAM',
argument5 => 'XXFUJI'
,argument6 => 'XXSAG_FILE_DATA'
DBMS_OUTPUT.put_line ('req_id= ' || req_id);
COMMIT;
END;
thanks in advance
sagar

thanks for your reply ... Alex
... but... no i don't wanna create concurrent program for fndload neither i want to use FNDLOAD script ... the above FNDLOAD Submit request program worked for me and using that i have created ldt but my problem is that program is creating ldt for all program which are registered , it's not picking my my file which i pass as a parameter ...please have look into my code ...
and please suggest me ..
thanks
sagar

Create new session for each window opening

From a jsp page i open a page called student.jsp by clicking on students admision no.Therefore lots of pages can be opend in new windows with relevent student details.
but when i click on the link i called a servlet, get relevent details and redirect to student.jsp. The problem is ,all opened windows have same session id and there are session conflicts.
How can i create new sessions for each page thru the servlet or is there any other alternatives

I actually was working on a problem that was similar to this, and the problem is with how each web-browser works with sessions...
Each browser window (Except in one case with IE) will use the same session in each window.
However, you might be able to use URL-Rewritting to manage your sessions and get around using cookies for for session tracking. I personally haven't tried this, but I'm betting that it will work.
Best of Luck,
Nate

MD04 not creating a PR for parts

All,
In MD04 i have aplanned order that is set to start on 5/27/11. Not all of the parts are in stock for the BOM to be built for the planned order. MRP runs in a batch file every night but it is not creating a PR for the some of the missing parts. Can someone give me some guidance as to why the PR is not being created. I have reviewed the raw material that the PR is not being created for against the other raw materials in the BOM that PRs have been created and the settings are the same for MRP.
Thanks in advance for help,
Sean

Hello,
Please check
If entry in planing file is missing for this material.
MDAB - Planning file entries
How to use T-code: MDAB and MDRE
Also check above links.
Hope it will help. Please revert back.
Alok Tiwari

How to creat commitment for PO PR but not creat statistical cost for GR

Hi,
Quantities and Values in Valuated Project Stock: Example - Material - SAP Library
Planning
Material FIN-M is assigned to network activity V10 and is managed in the project stock for WBS element P/4711.1.
The network type is flagged as appended and apportioned to the WBS.
Before the first MRP planning run or before the planned orders are converted into purchase requisitions or production orders, the following amounts appear in WBS element P/4711.1:
Planned costs of $500,00
Remaining order plan value of $300,00
The MRP controller begins by converting the planned orders. First, the planned order for the material RAW-M is converted into a purchase requisition and the planned order for the material SEMI-M is converted into production order A2.The order type is flagged as not appended and apportioned to the WBS.The remaining order plan value in the WBS element changes by the amount of the internal activities portion of production order A2 to $400,00 (300,00 + 100,00).After the purchase requisition is converted into a purchase order, a cost commitment of $50,00 also appears in WBS element P/4711.1.
External Procurement
Valuated goods are received for the purchase order, but the price is $10 different at $60. Assuming that material RAW-M is price-controlled, this gives rise to a debit posting of $60,00 in the stock account and credit posting of $60 in the GR/IR clearing account (Financial Accounting).If the inventory accounts was created as a cost element in CO, the following appear in WBS element P/4711.1:
Statistical actual costs of $60,00 in the stock cost element
A cost commitment of $0,00
If material RAW-M is price-controlled the standard price is $50,00, the postings in Financial Accounting are: $50,00 debit to a stock account $10,00 debit to a price difference $60,00 credit to the GR/IR clearing account
In this case, the only figure in the WBS element would be statistical actual costs of $50,00.
Above excerpt from SAP help, may I know how to do configuration to creat commitment for PO PR but not creat statistical cost for GR?
Thanks and regards,
Ray

Hello Jie,
if i right assuming your query then PR->PO= Commitment should be created.
but GRN by MIGO=Statistical cost should not create once MIGO if right then actual cost would be 0.
you can activate commitment by OKKP transaction.
And you want to cost should not be statistical after MIGO right?
here solution is cost never statistical type until account assignment object not statistical type this is my assumption.
if this is the issue then check G/L account from the PO. then check that G/L account, whether it is a B/S account or P&L account? I think you have wrongly assigned P&L account.
Regards,
Sanjeev

Jdeveloper 11.1.1.4 Could not create MAR entry for file

Hi
i am using jdev 11.1.1.4.i checkout code from svn to jdeveloper .
i tried to create EAR file for the application,but while creating EAR jdeveloper throwing some error message as shown below
find similar thread
JDeveloper Debugger Hangs
Could not create MAR entry for file [D:\JDeveloper\mywork\myAPortalApp\Portal\adfmsrc\oracle\webcenter\portalapp\pagetemplates\.svn\text-base\pageTemplate_swooshyPageDef.xml.svn-base], due to: MDS-01161: Reference "/oracle/webcenter/portalapp/pagetemplates/.svn/text-base/pageTemplate_swooshyPageDef.xml.svn-base" has an invalid character ".".
from the above message ,due to svn in the output folder ,jdeveloper is not able create MAR file entry .
i checked application properties for filter options ,jdeveloper has already has the filter "Exclude /.svn/"
can any one help me on this?
appreciate your help

Hi Aaron thanx for the reply.
i did not understand exporting from the subversion,but i did search in file for the svn there are two entires for .svn in portal.jpr file.
if i delete subversion connection from the jdeveloper and if i compile then it will create EAR file.

Server repository could not create function template for 'ZBAPI_EXPORT_SO

Hi all,
When i try to post a BAPI from R3 to XI i am getting this error.
Server repository could not create function template for 'ZBAPI_EXPORT_SO
This message was appeared in SM58.
Can anyone no the root cause of this ?

Hi Christoph,
Per the resolution of the CSS Ticket:
Parameters that are not mentioned in the SDN guide were needed in your particular situation.
The necessary parameters for configuring the MII side of the IDoc Listener are explained in the MII Help Documentation in the Client Properties section:
http://help.sap.com/saphelp_xmii120/helpdata/en/45/a705b23c14532ae10000000a1553f7/content.htm
All others are described in the Message Listeners section here:
http://help.sap.com/saphelp_xmii120/helpdata/en/45/6a86ac88130dece10000000a11466f/content.htm
Can you please update this post to reflect your particular situation so the SDN community can benefit from your experience?
Kind Regards,
Diana Hoppe
Edited by: Diana Hoppe on Dec 9, 2008 9:06 AM

RFC Sender error could not create function template for...

Hi,
I am trying to send an async RFC to XI. Since I use IN BACKGROUND TASK and COMMIT WORK I got following error in the SM58 of the back end system
Server repository could not create function
template for 'XYZ'
In the XI, I see nothing (no message, no error)
How can I fix this problem?
Thanks
Thomas

Hi Thomas,
You may need to have logical destinatio types for sender RFC. (and in the refernce entry you need to provide the actual destination)
may be some other errors also, Check this link and see if you have followed all the steps.
http://help.sap.com/saphelp_nw04/helpdata/en/25/76cd3bae738826e10000000a11402f/frameset.htm
Hope this fixes your issue.
Regards
Vishnu

Why we r not Creating Sender Agreement For HTTP & IDOc Adapter at Sender .

Hi Buddy's,
Why we r not Creating Sender Agreement For HTTP & IDOc Adapter at Sender .And why we create receiver agreements at receiver side bt not sender agreement at sender side.
Wat Is GLOBAL Container ?, where it will Occur & wat is the functionality of that.

Kumar,
1) XI integrattion server - IS expects the messages in XML format. If you see the HTTP request you will see that we pass all the info contained in the Sender areement in the the HTTP request itself , namely - Message interface, message type and the namespace (along with login parameters). For IDOCs the the IDOC- XML are are sent to the IS (through IDOC port configuration at the source system.
2) When send a message to XI the sender knows that XI system parameters, but when at the reciver end there could be any any system that is reciving the IDOc/HTTTp message. you specify those message through a commumication channel and this channel is associated to a receiver agreement.
3) A Global container is like a place holder for variables. You can set a variable here and access it throughout your mapping and hence the name.
A good example for a gloabal container is a counter to countthe number of records in te target side.
Regards,
Arvind ravindran

Yoga 11 - can not create an account for the App store,

I can not create an account for the App store, I live outside of the USA and the only address option is in the USA. Can you help me
Moderator Note: Edited subject to match content.

Hi
Welcome To Lenovo Community
We are really sorry to hear about the issue you are facing,
I have verified the Microsoft windows 8 app store has different regions listed
And you can connect app store using an existing Microsoft account like Hotmail, msn etc.
Please refer below link
http://windows.microsoft.com/en-US/windows-8/explore-windows-store#1TC=t1
Also if you can share the link or screen shot of the app store to help you further
Do give this a try and let us know
Hope This Helps
Cheers!!!
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español

Create POWL query for specific user (not self)

Hello All,
was wondering if anyone had an idea on how to create a POWL query for a specific user. Even the low level method in class CL_POWL_QUERY_ACCESSOR seem to assume that you either are creating an administrator query for any/everyone or just for yourself.
One option is to create multiple queries (for each selection criteria that I want) and assign these directly to user (rather than the role) in the config - but that's config that I'd need to transport up - for what is essentially user level personalisation.
My strong favourite at the moment is to throw a breakpoint in CL_POWL_QUERY_ACCESSOR and manually change the user name as I save new queries in directly in production - but that's not exactly the cleanest solution.
Surely someone has had a need to actually create queries for users, not just delete them as per program POWL_D01?
Many thanks for any hints and tips
Cheers,
Chris

Well - I should point out that you don't have to transport those user assignment of queries - tables are production maintainable. However, you do have to transport up the query itself - so not ideal.
Oh well - don't think this one has an answer => closing it to open another question.
Cheers,
Chris

Create alert for users not login in R12 for specific number of days

Dear experts
we have R12.1.1 .
i want to create auto alert for users who dont login to R12 application for defined period e.g 30 days .
please tell me that can i implement this ?
Regards

i want to create auto alert for users who dont login to R12 application for defined period e.g 30 days .
please tell me that can i implement this ?You can use Oracle Alert to do this. To check when was the last time the user logged in to the application, query FND_USER.LAST_LOGON_DATE (for example, SYSDATE - LAST_LOGON_DATE > 30).
http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=FND_USER&c_owner=APPLSYS&c_type=TABLE
Thanks,
Hussein

ISG not create a session for specific pepoles

Similar Messages

Maybe you are looking for