ISH-CO Integration (Case based order could not be created)

HI,
My name is Yael Jacobi; I am a CO implementer in SAP Project in Israel.
The project is for a hospital in Israel.
We are trying to implement the integration between the CO (Controlling) and the ISH module.
I haven't found any valuable information in the internet until now.
I will be grateful if you could send me any documentation regarding the ISH-CO integration
I am trying to create a case based order (internal order that should be created for a case in the ISH) but with no success.
I created an internal order type in CO and customize the relevant data ,in the basic settings for "SAP Healthcare-integration with controlling" ,but no case based order had been created .
The revenue posted to the profitability analysis segment instead of the case order.
Maybe do you have any idea why is that and what is missing?
I would really appreciate it if you could help,
Thanks in advance;
Best Regards,
Yael

Hi Yael,
first of all good to hear that you solved the problem. Actually we have a couple of similiar processes where SAP Patient Management uses "standard" ERP functionality in the background. Sometimes it is a good strategy to first check out whether the "standard" functionality works as expected by invoking the respective transactions in ERP manually (using the values which you lateron expect IS-H to use automatically). If they work according to your expectations you can then focus on the IS-H configuration.
I'd like to come back to your point on the documentation. If you write that you think it was not good enough, I am sure you have some ideas how to improve it? As you may know we are moving more and more into collaborative documentation technology like Wikis. Would you be willing to maybe actively help improving parts of the documentation by sharing some of your experiences and knowlegde?
For example, we could jointly start a Wiki page on the topic of IS-H/CO integration.
Please let me know your thoughts.
Best regards
Claudius

Similar Messages

Trnsaction IW32 : order Could not be created for notification

Hello,
I have created the notification in IW51
In trnsaction IW32 : I am getting error
Entry MT6
order Could not be created for notification 3570075
Following error could occured : Entry MT6
Please help me out
Regards
Rahul

Hello,
IW51
Notification Type :Z2
Notification      : 3570065
Functionlocation : XYZ
work Type         :cd and ef
Main wotk centr   : ca110 /cusm
planner group     : msw /cusm
after I am saving -
notification 3570099 will saved.
Then when I am trying to change -
menu-service notification-change
I am getting one pop-up-it will directly going to workflow systemworkflow Inbox---
order not created for notification 3570099
follwing error occured : MT6
regards

The integrity of the update could not be verified?

I tried to download the newest version of Firefox, and I got a text box stating that the integrity of the software could not be verified. When I try to click the link it provides, there is no link, and the page that comes up is all mangled and I can't see any links.
== This happened ==
Every time Firefox opened
== I try to view a page

I'm having this issue with minefield 4.0b7pre

Getting TF42008: The test case management package could not be loaded. Verify that Visual Studio Test Tool is installed and try again.

We are trying to run unit tests in TFS server.
Below is the System Configuration:
Visual studio version: VS 2013 Ultimate
TFS: TFS 2013
For this we have created a build and able to run the build successfully. And build page showing one link for Test result. When we click on this link, we got below error message.
"Getting TF42008: The test case management package could not be loaded. Verify that Visual Studio Test Tool is installed and try again."
And below is the screenshot of the error message. So please let us know is there and thing else we need to do to solve this issue?

Hi RS,
Thanks for your reply.
Yes, if you want to open and view test result on your laptop, you need install the VS 2013 on your laptop as well.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

09: order could not be checked

Experts,
I am getting the following message when I do a collective Availability Check via MDVP:-
"09" (order could not be checked). I have checked the Material Master several times over, but I am not able to find the issue. What setting do you think is missing? There are some materials where that message is not given but for a lot of them I am getting this message and not able to carry out a collective Availability Check. I assigned the same MRP group, MRP controller, Strategy group etc.. as the one assigned to the material that worked.
Your help will be greatly appreciated.
Regards,
Madagex

Hi,
I need the Availability Check to run against Individual check and maybe ATP, and both of them do not work. However, the against planning does work, but will not be useful.
Regards
Madagex

Account hasn't been charged-"Order could not be found." = One sad day. Help?

That's my order number(s). I ordered today at about 8 am, and nothing has been charged to my checking account. Also, everytime I try to check my order status, it gives me the lovely, "Order could not be found." - message. Should I be worried?

cathied wrote:
Are you using your order reference #? I was using the actual order # (oops, I hadn't finished my coffee yet).
I would think that if you have the confirmation you're all good. I can a $0.00 authorization from Verizon on my account, but they've not charged my card. Most people whose cards have been charged also show a "shipped" status, so I wouldn't worry too much about it if you have the confirmation. If you don't see it tomorrow maybe call *611. You probably don't want to call today because there are a lot of people calling 5-6 times just to see if their order has shipped yet and comparing answers so they can come on here and complain about the inconsistent answers LOL!
Let me clarify- You SHOULD be using the order reference # and NOT the order number. Sorry..

Error: Could not complete Create LOV Dialog Window...

Using Jdeveloper 10.1.2 UIX to drop a MessageLovInput onto an Input Form I get the following error:
Could not complete Create LOV Dialog Window because it would result in an invalid document.
Clicking on details reveals the following:
oracle.bali.xml.model.XmlInvalidOnCommitException: Errors
Errors:
Element text not defined in parent contents [node = text ]
invalid subtree:
<contents>
<text text="Find the collection (which contains the legal values for the lovInput) in the Data Control Palette. Select the attribute (of the collection) that will be set by the lovInput and drop it into this space as a 'LOV Table'. " />
</contents>
     at oracle.bali.xml.model.XmlModel._validateSubtree(XmlModel.java:2646)
     at oracle.bali.xml.model.XmlModel._validateDocument(XmlModel.java:2583)
     at oracle.bali.xml.model.XmlModel.precommitTransaction(XmlModel.java:1467)
     at oracle.bali.xml.model.XmlModel._validateInCommit(XmlModel.java:2538)
     at oracle.bali.xml.model.XmlModel.commitTransaction(XmlModel.java:531)
     at oracle.bali.xml.model.XmlModel.commitTransaction(XmlModel.java:516)
     at oracle.cabo.ide.adf.LovModelXml._createLovPage(LovModelXml.java:125)
     at oracle.cabo.ide.adf.LovModelXml.createControl(LovModelXml.java:55)
     at oracle.cabo.ide.adf.UixModelXml.populateFragment(UixModelXml.java:165)
     at oracle.cabo.ide.adf.UixAdfDocumentFragmentProvider.preInitializeNode(UixAdfDocumentFragmentProvider.java:38)
     at oracle.bali.xml.model.datatransfer.XmlKeyDocumentFragmentProvider._createDomNodeFromKey(XmlKeyDocumentFragmentProvider.java:97)
     at oracle.bali.xml.model.datatransfer.XmlKeyDocumentFragmentProvider.createFragment(XmlKeyDocumentFragmentProvider.java:38)
     at oracle.bali.xml.model.XmlModel.getImportedDocumentFragment(XmlModel.java:1771)
     at oracle.bali.xml.model.XmlModel.getFragmentForImportIfPossible(XmlModel.java:1801)
     at oracle.bali.xml.model.XmlModel.importData(XmlModel.java:1078)
     at oracle.bali.xml.model.XmlView.importData(XmlView.java:773)
     at oracle.bali.xml.gui.swing.dnd.ModelDropHandler._transferData(ModelDropHandler.java:624)
     at oracle.bali.xml.gui.swing.dnd.ModelDropHandler.drop(ModelDropHandler.java:235)
     at java.awt.dnd.DropTarget.drop(DropTarget.java:398)
     at sun.awt.dnd.SunDropTargetContextPeer.processDropMessage(SunDropTargetContextPeer.java:542)
     at sun.awt.dnd.SunDropTargetContextPeer.access$800(SunDropTargetContextPeer.java:52)
     at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchDropEvent(SunDropTargetContextPeer.java:805)
     at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchEvent(SunDropTargetContextPeer.java:743)
     at sun.awt.dnd.SunDropTargetEvent.dispatch(SunDropTargetEvent.java:29)
     at java.awt.Component.dispatchEventImpl(Component.java:3494)
     at java.awt.Container.dispatchEventImpl(Container.java:1627)
     at java.awt.Component.dispatchEvent(Component.java:3477)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
     at java.awt.LightweightDispatcher.processDropTargetEvent(Container.java:3269)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3123)
     at java.awt.Container.dispatchEventImpl(Container.java:1613)
     at java.awt.Window.dispatchEventImpl(Window.java:1606)
     at java.awt.Component.dispatchEvent(Component.java:3477)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
Opening the UIX page, the following code has been generated; not a <listOfValues> tag in sight!
<?xml version="1.0" encoding="windows-1252"?>
<page xmlns="http://xmlns.oracle.com/uix/controller"
xmlns:ui="http://xmlns.oracle.com/uix/ui"
xmlns:ctrl="http://xmlns.oracle.com/uix/controller"
xmlns:html="http://www.w3.org/TR/REC-html40"
expressionLanguage="el">
<content>
<dataScope xmlns="http://xmlns.oracle.com/uix/ui">
<provider>

</provider>
<contents>
<document>
<metaContainer>

<head title=""/>
</metaContainer>
<contents>
<body>
<contents>
<form name="form0">
</form>
</contents>
</body>
</contents>
</document>
</contents>
</dataScope>
</content>
<handlers>

</handlers>
</page>
I have checked Metalink but can't find this error there either. Based on examples on OTN I have tried to create the LOV window manually but it does not work as expected:
1) The window is not empty when opened - i.e. data has been retrieved.
2) The filtering does not work.
3) The selected value does not update the Input Form.
I have pasted the code below in case anyone can point me in the right direction to work around the Jdeveloper error. However, I think Jdeveloper should create the LOV window correctly.
Thanks in advance for your help.
<?xml version="1.0" encoding="windows-1252"?>
<page xmlns="http://xmlns.oracle.com/uix/controller"
xmlns:ui="http://xmlns.oracle.com/uix/ui"
xmlns:ctrl="http://xmlns.oracle.com/uix/controller"
xmlns:html="http://www.w3.org/TR/REC-html40" expressionLanguage="el">
<content>
<dataScope xmlns="http://xmlns.oracle.com/uix/ui">
<provider>

</provider>
<contents>
<document>
<metaContainer>

<head title=""/>
</metaContainer>
<contents>
<body>
<contents>
<listOfValues title="Organization"
searchText="Enter search string here">
<contents>

<table model="${bindings.OrganizationView1}" id="OrganizationView13">
<contents>
<column>
<columnHeader>
<sortableHeader model="${ctrl:createSortableHeaderModel(bindings.OrganizationView1,'Name')}"/>
</columnHeader>
<contents>
<textInput model="${uix.current.Name}" columns="10" readOnly="true"/>
</contents>
</column>
<column>
<columnHeader>
<sortableHeader model="${ctrl:createSortableHeaderModel(bindings.OrganizationView1,'Address')}"/>
</columnHeader>
<contents>
<textInput model="${uix.current.Address}" columns="10" readOnly="true"/>
</contents>
</column>
<column>
<columnHeader>
<sortableHeader model="${ctrl:createSortableHeaderModel(bindings.OrganizationView1,'Url')}"/>
</columnHeader>
<contents>
<textInput model="${uix.current.Url}" columns="10" readOnly="true"/>
</contents>
</column>
<column>
<columnHeader>
<sortableHeader model="${ctrl:createSortableHeaderModel(bindings.OrganizationView1,'Phone')}"/>
</columnHeader>
<contents>
<textInput model="${uix.current.Phone}" columns="10" readOnly="true"/>
</contents>
</column>
</contents>
<tableSelection>
<singleSelection model="${bindings.OrganizationView1Iterator}" text="Select and ">
<primaryClientAction>
<firePartialAction targets="OrganizationView13" source="OrganizationView13" event="select"/>
</primaryClientAction>
</singleSelection>
</tableSelection>
</table>
</contents>
<filterChoice>
<choice name="filterBy">
<contents>
<option text="Name" value="name"/>
<option text="Address" value="address"/>
</contents>
</choice>
</filterChoice>
<headerInstructions>
</headerInstructions>
<searchInstructions>
</searchInstructions>
</listOfValues>
</contents>
</body>
</contents>
</document>
</contents>
</dataScope>
</content>
<handlers>

<event name="goto sort" source="OrganizationView13">
<invoke method="handleTableUiEvent" javaType="oracle.cabo.adf.rt.AdfUtils">
<parameters>
<parameter javaType="oracle.adf.model.binding.DCIteratorBinding" value="${bindings.OrganizationView1Iterator}"/>
<parameter javaType="oracle.cabo.servlet.expl.ControllerImplicitObject" value="${uix}"/>
</parameters>
</invoke>
</event>
<event name="select" source="OrganizationView13">
<set target="${bindings.OrganizationView1Iterator}" property="currentRowIndexInRange" value="${ui:tableSelectedIndex(uix, 'OrganizationView13')}"/>
</event>
<event name="lovFilter">
<compound>
<invoke method="setWhereClause" javaType="oracle.jbo.ViewObject" instance="${bindings.Name.viewObject}">
<parameters>
<parameter javaType="string" value="${empty param.filterBy ? 'NAME' : param.filterBy} LIKE '${param.searchText}'"/>
</parameters>
</invoke>
<invoke method="executeQuery" javaType="oracle.jbo.ViewObject" instance="${bindings.Name.viewObject}"/>
</compound>
</event>
</handlers>
</page>

Thanks for the response. OK... This is the first day I have been able to get back to the problem.
My system I am running Photoshop on is a Power Mac G4, AGP Graphics ATY Rage 128Pro chip set 16MB VRAM LCD 1280x1024 32-bit color, 500MHz, 1.75GB of memory, 1 MB L2 Cache, 100 MHz Bus Speed. I had installed the latest security update and repaired the permissions the day the problem started.
Now to day I started the system and went in and created a Guest Account. I logged into the guest account and started Photoshop. Low and behold it worked just fine. So I logged out of guest and logged into my main user account And started Photoshop. Wouldn't you know it.... It works just fine. I can open any file I want with now problems.
I got to thinking after I had done all of this that I wished I had tried to open a file in Photoshop today prior to creating the guest account to see if it still had the problem in my main user account.
I did not change anything else on the system and all seems to work fine now. So at his point I am really not sure what the problem was.
Again thanks for taking the time to respond to this issue.

Sparsebundle could not be created (error 45)

I just bought my first ever Mac a little over 30 days ago and also purchased a 1TB Seagate FreeAgent GoFlex Home network storage system. I immediately installed the GoFlex software that included a full integration into Time Machine. This worked perfectly until about 4 days ago when all of a sudden it stopped backing up. I'm getting an error that reads: Time Machine could not complete the backup "...sparsebundle could not be created (error 45)".
I can still access the drive outside of the TM program (although not the ATM folder), so the drive itself perfectly installed and connected. I tried rebooting computer and hard drive; that didn't work. I tried re-selecting the drive from within TM; that didn't work either. I'm not really sure what to do...and am pretty pi$$ed at all those "I'm a Mac vs. I'm a PC" commercials right now because this is the same kinda stuff that got me to leave the Windows based systems in the first place. UGH...so WHY is my $4,000 Mac supposed to be any better that an equivelent $2,500 PC?????? Any suggestions on a fix would be greatly appreciated.

+I'm running 10.6.7, last I checked that was later then 10.5.6.+
Try reading a little more carefully. The server has to be a Time Capsule or a Mac running 10.5.6 or later, not the client. Your NAS is neither, so your configuration is unsupported, and predictably, it doesn't work.
+Mac lends their name and brand to the Seagate product, so I must therefore assume your comments are are ill-informed.+
Apple has nothing to do with the Seagate product. Seagate, not Apple, claims that it's compatible with Time Machine, and Seagate, not Apple, is responsible for that claim. If you think the claim is misleading, you have a point, and if you can't get satisfaction from Seagate I suggest you consult a lawyer.
For the benefit of anyone finding this topic, the Seagate NAS is *not safe to use with Time Machine*.

I got this error while my mac was backing up to time machine: he backup disk image "/Volumes/Data/Sanjeev's iMac.sparsebundle" could not be created (error (null)). Please could someone help

I got this error while my mac was backing up to time machine: he backup disk image “/Volumes/Data/Sanjeev’s iMac.sparsebundle” could not be created (error (null)). Please could someone help

Has the backup been working ok??
If that is the case simply reboot the TC.. or if that fails, reboot the whole network, restarting in correct order..
modem.. wait 2min
TC.. wait 2min

PO could not be creating using the Enjoy-BAPI

Hi expersts.
I have a problem with BAPI function module BAPI_PO_CREATE1. When program will generate orders for several suppliers for one supplier "PO could not be creating using the Enjoy-BAPI" and "Purchase order item 00010 still contains faulty schedule lines" and
"Source not included in list despite source list requirement" messages occur. Order won't be generated.
When I am generating order only for that supplier, everything is fine. They are generated and no messages are displayed.
Could anyone help me ?
Thanks, regards.
Dan.

Hi expersts.
I have a problem with BAPI function module BAPI_PO_CREATE1. When program will generate orders for several suppliers for one supplier "PO could not be creating using the Enjoy-BAPI" and "Purchase order item 00010 still contains faulty schedule lines" and
"Source not included in list despite source list requirement" messages occur. Order won't be generated.
When I am generating order only for that supplier, everything is fine. They are generated and no messages are displayed.
Could anyone help me ?
Thanks, regards.
Dan.

Is there a way to fix 'Sent mailbox could not be created?'

I have OS 10.8.5 and am using Mail as the mail program, since November. I have not had this problem before. I have four accounts in mail, iCloud, Gmail, Roadrunner and Earthlink. The main one i use is Gmail. Today i noticed that there was an exclaimation point next to my Gmail Sent mailbox. i opened the mailbox and it showed only one sent message that i sent earlier today. There should have been a few months of mail in the mail box, maybe 30 to 50 messages. i clicked on the exclaimation point and the message said:
The Sent mailbox could not be created on the mail server. The local "Sent Messages (Gmail) mailbox was created instead. Mail has changed your account's Mailbox Behaviors preferences to use the local "Sent Messages (Gmail)" mailbox.
i don't know what this even means. My other account mailboxes have their mail in them, only the Gmail mailnbox is not created (although it does have that one message in it). There wasn't anything different i did that would change any preferences that i know of. I see the Gmail Sent messages mailbox at the bottom of the mailbox list and the missing messages are there, but instead of listing the name of the recipient under a To: column, instead there is a From: column, and my name is all that is listed. There is no To: column. I need to know who the messages were sent to if i need to search for one later. i want the recipient to be idendified in the header, as it is in my other Sent mailboxes.
There is one thing that happened right before this occurred. I got a brand new Time Capsule and replaced my very old Airport Extreme with it. I didn't change anything. i just replaced the old base station with the new one, keeping all settings, network names and passwords the same, i just switched the hardware.
After setting up the Time Capsule, when i checked my email, i found this problem with my Gmail mailbox missing.
I found this problem raised in a few other postss on these discussion forums, but there was little or no discussion on the threads. None of them mentioned a new Time Capsule. i'm hoping someone who reads this can say what might have caused this and where the mail box is, and how to get it back.

Glenn--thanks for the reply. I think i tried your first suggestion---i highlighted the Gmail account Sent mailbox and went to the Mailbox menu, went to 'Use this mailbox for,' but all of the four options were grayed out (Sent, Junk, Trash, Drafts). i tried highlighting (or selecting) other mailboxes in the column on the left, including the ones on the server and the ones 'on this mac.' No matter which one i selected, the options were grayed out. Do you know why they would be grayed out? Am i not understanding what to do, or is there some other reason? i'm in Classic mode, in case that matters as to what's in the left column.
I have not yet tried disabling the Gmail account. i was going to, but when i went to Preferences > Accounts > Gmail, i saw and remembered that i had changed one of the settings not long ago, a week or so--where it says "Use only this server" under Outgoing Mail Server (SMTP) i had unchecked 'use only this server,' since none of the other accounts had that checked. So i rechecked it and am wondering if that would protect against what happened.
I feel nervous about disabling the account and removing it from Mail and wanted to ask you, will everything come back when i re-enable it?
Thanks

COREid Federation Error: A local user session could not be created for the

Hi,
I installed two instances of COREid Federation in my machine. Also installed SiteMinder and LDAP. Source Domain of COREid (8101) uses LDAP as IdMBridge and Destination Domain (9101) uses SiteMinder as IdMBridge. I am trying to access the resource protected by the SiteMinder from the source domain using the URL which is constructed using the pattern given in the PDF:
http://mymachine.domain.com:8101/shareid/saml/ObSAMLTransferService?DOMAIN=DestinationDomain&method=POST&TARGET=http://mymachine.domain.com:8887/Source/Source.html
Assertions are generated and I can see the assertion in the Source domain and transferred to the Destination Domain.
I get the following error in the Destination Domain Shareid Log file:
ERROR - [http10113-Processor3] - RECEIVER: ERROR: A local user session could not be created for the assertion
Please help me to solve this issue?
Note: The Web agent runs on the web server instance 8887.
SiteMinder is able to protect the resource when accessed.

Typically that error occurs when the destinations access management system can't find the user based on the SAML attribute. Check to make sure that the attribute that you are matching on matches exactly.

SHAREid - A local user session could not be created for the assertion

Problem: We have a client trying to federate to our environment using POST profile but we are getting the following error, "RECEIVER: ERROR: A local user session could not be created for the assertion".
I verified that the user exist in the directory and I am able to execute a test successfully as that user.
Thanks.

There is a requirement that the client needs to send an attribute called "traveler" in the assertion. We found out that the problem occurs only when client sends a attribute in the assertion. When the assertion does not include the attribute, there is no issue. Not sure why that is the case as we have other clients sending the same attribute in the assertion.
Here is the AttributeStatement.
<saml:AttributeStatement xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><saml:Subject><saml:NameIdentifier Format="urn:oasis:names:tc:SAML:1.1:nameid-format:unspecified">XXXXXX</saml:NameIdentifier></saml:Subject><saml:Attribute AttributeName="XXXID" AttributeNamespace="http://schemas.xmlsoap.org/claims"><saml:AttributeValue>XXXXX</saml:AttributeValue></saml:Attribute></saml:AttributeStatement>
It does not have <saml:SubjectConfirmation> and <ConfirmationMethod> element. Can that be a problem?
Thanks,
Vinay
Edited by: user504421 on Jul 9, 2009 2:17 PM

Even after resets get "The backup disk image "/Volumes/FreeAgent GoFlex Drive/MacBeth (2) 1.sparsebundle" could not be created (error 22)."

HELP! "The backup disk image “/Volumes/FreeAgent GoFlex Drive/MacBeth (2) 1.sparsebundle” could not be created (error 22)."
TC estimates over 750GB for full backup.
Late 2010 MBA is connected wirelessly to
802.11n (1st gen) TC that is connected via ethernet hub built into house to motorola router using charter.com for internet.
I have had same problem for over 150 days and multiple reboots, restarts in proper order, firmware updates, unplugs with 5min plus gaps, bypassing the tc and using external 500gb WD mybook via usb to time capsule, replacement of the WD mybook to new 2TB Free Agent GoFlex drive, etc, etc, etc! Note: I originally named my MBA hard drive MacBeth, but at some point months ago, it said backup already existed and system automatically created MacBeth (2), worked for a while, then stopped again, despite trying nearly daily.
I gave up and started using Carbon Copy Clone daily for just the 128gb on internal SSD of my late 2011 11" MacBook Air, but need to get past these time capsule errors to back up the external disk! Due to lack of space in MBA, I had long ago transferred both itunes and iphoto and all imovie/fcpx files to a 1tb external disk (WD Passport) that I keep in my bag with MBA. It is partitioned with 150gb for cloning the MBA, and over 750gb for media/itunes/iphoto/etc.
Also, I have endured months of "your hard drive is full" messages and system lockups, applying the solution given to me by genious bar (deleting all aol.com outboxes/recovered messages/spam/trash under library/mail/V2/Mailboxes folders, empty trash, restart....watch recovered hard drive space mysteriously shrink next couple days to zero.....repeat)
Due to lack of space, I had not been able to do javascript and other system updates. Yesterday, I noticed even safari bookmark bar had mysteriously emptied (not disappeared, I can hide and show the space where the bar used to be - it is just blank area with no data except for eyelass-book-topsites icons), so I transferred a few large quicktime movie files recorded with isight camera to the external disk, and freed up 20 gbs for the first time!
This got my hopes up yesterday because after I completed all system/software updates, suddenly the bookmark bar showed up and I was able to start the time capsule backup! It took overnight preparing for backup, but finally started and progressed to 12gb of the 100gb+ needed (i guess the update where it left off months ago for the estimated 750gb for the full backup?), then I put system to sleep and took it with me (thus leaving the wireless time capsule network as I do daily fully expecting it to continue when I returned home in the evening.) But alas, upon return, back to the "Time Machine could not complete backup, The backup disk image ".....sparsebundle" could not be created (error 22)" Ugh! More reboots, unplugs, 5min gaps....still Ugh!
So the problem continues...please help! Here are my settings:
About this mac:
Mac OS X V. 10.7.5
processor 1.6 ghz intel core 2 duo, memory 4 4g 1067 MHz DDR3
software up to date!
Airport Utility:
V 6.2 (620.33)
both internet globe and TC show green dots in graphic, however internet occasionally shows yellow then goes to green, but still gets error 22. Suddenly TC showed explanation mark and says lost connection and asked if I wanted to 'forget', gave same errors, then mysteriously went back to green, but still got error 22!.
Internet:
connection: connected, displays router address, 2 dns server, and domain name: charter.com
Time Capsule:
shows network, ip address, serial number, version 7.6.3, status: (green dot) Setup over WAN,
wireless clients: phones, macbooks (including this MBA), printers, wii
If you need other settings to help me, just ask! I have read a few of the other solutions in forums, but trying not to erase disks, especially since it worked for a minute yesterday!

To step sideways.. why not just use CCC to backup the 750GB of the hard disk to the TC.
You need to understand this is going to be a super slow process and each time you stop it.. it is going to give issues. CCC will at least do a more reliable job of it than TM.
I would also say.. this is going to be tough without ethernet. You need to understand the backup speed over wireless can be 10GB per hour.. that makes 75hrs to backup the disk. The air needs to run non-stop doing that.. without you touching it.
I would get another external drive.. plug that into the MBA and if you really want to use TM.. make a backup one to the other.. but CCC will again do a better job and work faster. It will be much faster than over wireless.
I am trying to think of ways around the issue of just speed.. but plainly you have lots of other issues.. being the simple unreliablity of the TM to identify the TC.
If you want to make this work.. give yourself a weekend.
Load 5.6 utility into the MBA..
http://support.apple.com/kb/DL1482
Take the TC back to 7.5.2 firmware. It is a really old version and latest firmware does it no good at all.
Wipe its hard disk using erase and start over.. give it new names for everything.
So call it TC
Set the wireless to 5ghz and name it TC5ghz
Use WPA2 Personal security. Use a 10 character passkey non dictionary.
At 5ghz you should get 2x the speed as at 2.4ghz but the air will need to be right next to the TC..
(alternatively buy the USB to ethernet cord apple have available.. it is $30 in the apple store and do it over pseudoethernet. http://store.apple.com/au/product/MC704ZM/A/apple-usb-ethernet-adapter That is the wrong store but you get the idea. )
WIth a fully clean system.. now do a full reset of TM.
See A4 http://pondini.org/TM/Troubleshooting.html
Direct the TM to back to the TC.. and make sure the external hard disk is not excluded.
Of course the TC has to be 1TB version to fit that much data.. goes without saying right.
Even over pseudo - ethernet this will take many hours.. and you basically have to leave it to work.. do not touch it.. make sure the MBA cannot sleep though.. turn off sleep.. beforehand.

Delivery could not be created

Hi Experts,
We have several POs type UB stock transport order from plant XXXX to YYYY. For some products in those POs delivery could not be created due to Sales status of material on used sales org.
Even though that delivery could not be processed, shipping notification has been created and shipment as well. This means that goods are in transit to plant YYYY but could not be goods receipted against PO as no delivery and goods issue have been done.
Now status has been changed in sales org .
Thereafter we try to create delivery via VL10D but it is not possible as not stock is available as in transit.
How could delivery be created in order to be able to PGI and PGR?
Regards

hi,
this is to inform you that,
you can see * the deliveries that could not be created*: in VL06F you will find in STATUS OUTBOUND DELIVERIES FUNCTION.
you can see * successfully created deliveries* : in VL06F you will find in STATUS OUTBOUND DELIVERIES FUNCTION
in the above you will find 4 options
NONE: not relevant.
A: not yet processed
B:partial processed
c:completley processed.
take a pick of the options which ever you want to you can find out.
regards,
balajia

ISH-CO Integration (Case based order could not be created)

Similar Messages

Maybe you are looking for