Isight and built in microphone not working. Is that normal??

Hi there, is it normal if I can't use the built in microphone and I can't set it up also for the cam I found the same problem? There is a lack of drivers maybe? Please let me know, cheers!!!

And for the problem regarding the built-in microphone you know if there isthe driver? Putting a usb Microphone it does work properly. Maybe they will prepare a set of mac drivers updated for windows?
Anyway thanks for the first answer!!

Similar Messages

My Aspire 5750-6438 built in microphone not working.

My Aspire 5750-6438 built in microphone not working. My OS is windows 7 64-bit. I have updated all the driver. Built in microphone is not even recognized in the sound setting.

welly267,
Go into the device manager and check to see if there is a yellow or red icon next to your built-in microphone. If there is a red one, it's probably disabled, see if you can enable it. If it is yellow, right click to uninstall it, then restart your notebook to see if it installs correct and starts working. Look through these steps if it does start showing up in the sound manager.
If it does not, you can try to remember when it worked last and try a system restore. If you cannot remember, you might have a hardware problem or can try to perform a recovery as a last resort to see if that solves it.

After my iPad 2 upgraded to IOS 5.0.1, built in Microphone not working

Just what I said, my iPad 2 upgraded to IOS 5.0.1 from IOS 5 on last week, the built in microphone is not working anymore, I can't record the video with sound, and called my friends with Facetime, they can't heard my voice. Then I already restored IOS 5.0.1 for a few time and built in microphone is still not working. Does anyone iPad 2 has the same issue after using IOS 5.0.1? And anyone can help me to fix this? Thx.

I've read other posts about this, and while it seems an odd coincidence, you likely have a faulty microphone. On the right hand side you'll see similar posts. The majority of people who all of the sudden had mic's that wouldn't work after updating, wound up getting their iPads replaced at the Genius Bar at their local Apple Store. You could try rebotting, by pressing and holding BOTH the home and power buttons at the SAME time for at least 10 seconds (ignore the red slider to shut down) until the Apple Logo appears, then let go fo both buttons and your iPad will restart. If that doesn't work, I would not recommend restoring. Instead, make an appointment at the Apple Store and if found defective it will be replaced. Do remember to create a backup before going. It will make setting up a new device exactly as you had it, much much simpler.

Re: Portege R700-184 - Built in microphone not working

I can't seem to get the built in microphone to work. However, it works fine with an external usb microphone.
Have tried changing the settings in the control panel called 'Sound' where I click on the 'Recording Tab'. 'Microphone' shows a green tick as the default device. Strangly, the graduated bar to the right of the microphone, sometimes shows random green activity, but nothing which relates to any sounds I make at the time. Driver is working and up to date.
Any suggestions greatly appreciated.

Hey,
>Driver is working and up to date.
What driver you mean exactly? Hopefully not the sound driver because it has nothing to do with internal microphone. It belongs to webcam so you should reinstall/update the webcam driver.
Check this!!!

Toshiba Sattelite A200-1A9 Built in microphone not working

Model Name: SATELLITE A200-1A9
Model NO: PSAE0E-01S025AV
Serial NO: 47193782K
I install Windows 7 on my laptop and the built in microphone stopped working. Tried everything suggested on all posts for not woking built in microphone and still I am not able to record any voice or to use Skype, etc.
When going to 'Recording Devices' I have two Microphones (one front and one ATAPI), but the green bar on the right does not move when making sound. I tried disabling the front microphone, still no success.
Any help will be appreciated!

Hi Dokie,
I scan my pc with a Device Manager and it showed these results. Some of the drivers are not correctly installed I guess and these are the Realtek driver and the Chicony camera driver. Do you think this might be the reason?
Thanks
Attachments:
Driver Manager 1.png ‏492 KB
Driver Manager 2.png ‏487 KB
Driver Manager 3.png ‏494 KB
Driver Manager 4.1.png ‏382 KB

Built-in microphone not working on Equium A300D

I have Toshiba Equium A300D 13X with vista 32-bit, I cant get the built in microphone to work.
All the speakers and the webcam seem to work and I have tried to update the drivers from this website but nothing fixes the mic problems.
Can you help?

Hi
Why are you sure that the internal microphone does not work?
How did you test this?
The internal microphone belongs to the internal webcam.
You can increase the mic volume in webcam software settings.
Start webcam software -> settings -> audio tab
There you should increase the mic volume to max.
The option Audio Device should contain something like Microphone (Conexant High definition). Audio Compressor -> No compress

Built in Microphone not working - Windows 8 - Edge E430

Hey Guys,
My built in microphone was working correctly until a few days back. I made no updates or system setting changes. It's a ThinkPad Edge E430 with Windows 8. The required audio drivers are in place. I have also enabled the microphone from audio settings. Please refer image below.
Can some one guide me on what else I can do? Will be grateul as all my Skype calls are blocked becuase of this.
Thank you,
Hariharan.

Hi again, Hariharan
If you right-click on the first selection in the image (the microphone) and select Properties, you should be able to see the driver in formation on the Driver tab in the new window. Can you list the driver Provider, Date, and Version? Also, how long have you had the machine, and how long was the microphone working properly before this issue began?
Thanks in advance,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Built-in microphone not working

I can't get my Imac's microphone to work, all that is heard is static and doesn't seem to pick up any sound at all. Anyone know how to solve this?

Thanks for the tip. Altough I think the problem lies on my skype. Once i got rid of the app, the microphone started working again. I checked by redownloading Skype and once again caused my mic to go bad. But once again thank you, this information led me to a place I din't know previously existed and it's good to keep it in mind.

Built-in microphone not working (or extremely silent) under Windows XP

The built-in microphone works great on my iMac under OS X 10.6.
However, it does not seem to work under Windows XP, using BootCamp. Is there any way to fix it?

Hi again, Hariharan
If you right-click on the first selection in the image (the microphone) and select Properties, you should be able to see the driver in formation on the Driver tab in the new window. Can you list the driver Provider, Date, and Version? Also, how long have you had the machine, and how long was the microphone working properly before this issue began?
Thanks in advance,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Satellite C650-010 - Built in microphone not working

built in microphone did not work after three weeks. I tried to install new driver software from Toshiba website, but did not help. External webcam with microphone works well.
Yesterday microphone worked for ten minutes but then mute again.

Hey,
> I tried to install new driver software from Toshiba website
What driver software you have installed?
The microphone belongs to internal webcam so you have to reinstall the webcam driver if internal microphone doesnt work properly.
> but then mute again.
Does this mean the internal microphone is muted? Please check the Windows sound settings if the microphone is listed properly under recording devices and set as default device.

Built in microphone not working. Can't select the 'Input Source'.

I can't get the built in mic on my laptop to work, i tried any suggestion i could find on internet but i'm still stuck. I haven't used it before with windows or any other distribution so i can't tel if it's a new/old problem. I think the problem is that i don't have an option to select the 'Input Source' e.g. Mic or Front Mic as i saw in other's amixer controls/contents outputs.
Mine looks like this:
amixer controls
[root@myhost ~]# amixer controls
numid=2,iface=MIXER,name='Master Playback Switch'
numid=1,iface=MIXER,name='Master Playback Volume'
numid=18,iface=MIXER,name='PCM Playback Volume'
numid=4,iface=MIXER,name='Mic Playback Switch'
numid=3,iface=MIXER,name='Mic Playback Volume'
numid=5,iface=MIXER,name='Capture Switch'
numid=6,iface=MIXER,name='Capture Switch',index=1
numid=7,iface=MIXER,name='Capture Volume'
numid=8,iface=MIXER,name='Capture Volume',index=1
numid=13,iface=MIXER,name='IEC958 Default PCM Playback Switch'
numid=9,iface=MIXER,name='IEC958 Playback Con Mask'
numid=10,iface=MIXER,name='IEC958 Playback Pro Mask'
numid=11,iface=MIXER,name='IEC958 Playback Default'
numid=12,iface=MIXER,name='IEC958 Playback Switch'
numid=15,iface=MIXER,name='Beep Playback Switch'
numid=14,iface=MIXER,name='Beep Playback Volume'
numid=17,iface=MIXER,name='Caller ID Switch'
numid=19,iface=MIXER,name='Digital Capture Volume'
numid=16,iface=MIXER,name='Off-hook Switch'
amixer scontrols
[root@myhost ~]# amixer scontrols
Simple mixer control 'Master',0
Simple mixer control 'PCM',0
Simple mixer control 'Mic',0
Simple mixer control 'IEC958',0
Simple mixer control 'IEC958 Default PCM',0
Simple mixer control 'Beep',0
Simple mixer control 'Capture',0
Simple mixer control 'Capture',1
Simple mixer control 'Caller ID',0
Simple mixer control 'Digital',0
Simple mixer control 'Off-hook',0
amixer contents
[root@myhost ~]# amixer contents
numid=2,iface=MIXER,name='Master Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=1,iface=MIXER,name='Master Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=64,step=0
: values=62,62
| dBscale-min=-64.00dB,step=1.00dB,mute=0
numid=18,iface=MIXER,name='PCM Playback Volume'
; type=INTEGER,access=rw---RW-,values=2,min=0,max=255,step=0
: values=249,249
| dBscale-min=-51.00dB,step=0.20dB,mute=0
numid=4,iface=MIXER,name='Mic Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=3,iface=MIXER,name='Mic Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0
: values=30,30
| dBscale-min=-34.50dB,step=1.50dB,mute=0
numid=5,iface=MIXER,name='Capture Switch'
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=6,iface=MIXER,name='Capture Switch',index=1
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=7,iface=MIXER,name='Capture Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0
: values=31,31
| dBscale-min=-16.50dB,step=1.50dB,mute=0
numid=8,iface=MIXER,name='Capture Volume',index=1
; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0
: values=31,31
| dBscale-min=-16.50dB,step=1.50dB,mute=0
numid=13,iface=MIXER,name='IEC958 Default PCM Playback Switch'
; type=BOOLEAN,access=rw------,values=1
: values=on
numid=9,iface=MIXER,name='IEC958 Playback Con Mask'
; type=IEC958,access=r-------,values=1
: values=[AES0=0x0f AES1=0xff AES2=0x00 AES3=0x00]
numid=10,iface=MIXER,name='IEC958 Playback Pro Mask'
; type=IEC958,access=r-------,values=1
: values=[AES0=0x0f AES1=0x00 AES2=0x00 AES3=0x00]
numid=11,iface=MIXER,name='IEC958 Playback Default'
; type=IEC958,access=rw------,values=1
: values=[AES0=0x04 AES1=0x00 AES2=0x00 AES3=0x00]
numid=12,iface=MIXER,name='IEC958 Playback Switch'
; type=BOOLEAN,access=rw------,values=1
: values=on
numid=15,iface=MIXER,name='Beep Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=14,iface=MIXER,name='Beep Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0
: values=22,22
| dBscale-min=-34.50dB,step=1.50dB,mute=0
numid=17,iface=MIXER,name='Caller ID Switch'
; type=BOOLEAN,access=rw------,values=1
: values=on
numid=19,iface=MIXER,name='Digital Capture Volume'
; type=INTEGER,access=rw---RW-,values=2,min=0,max=120,step=0
: values=90,90
| dBscale-min=-30.00dB,step=0.50dB,mute=0
numid=16,iface=MIXER,name='Off-hook Switch'
; type=BOOLEAN,access=rw------,values=1
: values=on
asound.state
[root@myhost ~]# cat /var/lib/alsa/asound.state
state.Intel {
control.1 {
iface MIXER
name 'Master Playback Volume'
value.0 62
value.1 62
comment {
access 'read write'
type INTEGER
count 2
range '0 - 64'
dbmin -6400
dbmax 0
dbvalue.0 -200
dbvalue.1 -200
control.2 {
iface MIXER
name 'Master Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.3 {
iface MIXER
name 'Mic Playback Volume'
value.0 30
value.1 30
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 1050
dbvalue.1 1050
control.4 {
iface MIXER
name 'Mic Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.5 {
iface MIXER
name 'Capture Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
control.6 {
iface MIXER
name 'Capture Switch'
index 1
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.7 {
iface MIXER
name 'Capture Volume'
value.0 31
value.1 31
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -1650
dbmax 3000
dbvalue.0 3000
dbvalue.1 3000
control.8 {
iface MIXER
name 'Capture Volume'
index 1
value.0 31
value.1 31
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -1650
dbmax 3000
dbvalue.0 3000
dbvalue.1 3000
control.9 {
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.10 {
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.11 {
iface MIXER
name 'IEC958 Playback Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
control.12 {
iface MIXER
name 'IEC958 Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.13 {
iface MIXER
name 'IEC958 Default PCM Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.14 {
iface MIXER
name 'Beep Playback Volume'
value.0 22
value.1 22
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -150
dbvalue.1 -150
control.15 {
iface MIXER
name 'Beep Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.16 {
iface MIXER
name 'Off-hook Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.17 {
iface MIXER
name 'Caller ID Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.18 {
iface MIXER
name 'PCM Playback Volume'
value.0 249
value.1 249
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 255'
tlv '0000000100000008ffffec1400000014'
dbmin -5100
dbmax 0
dbvalue.0 -120
dbvalue.1 -120
control.19 {
iface MIXER
name 'Digital Capture Volume'
value.0 90
value.1 90
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 120'
tlv '0000000100000008fffff44800000032'
dbmin -3000
dbmax 3000
dbvalue.0 1500
dbvalue.1 1500
state.HDMI {
control.1 {
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.2 {
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.3 {
iface MIXER
name 'IEC958 Playback Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
control.4 {
iface MIXER
name 'IEC958 Playback Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
alsamixer
Everything else related to alsa seems to work fine. If anyone has any ideea of what i should do/read/check please help.
Last edited by theother (2011-04-12 09:37:32)

Dreyfus2006, welcome to the forum.
I suggest going into Control Panel / Troubleshooting / Hardware and Sound / Recording Audio. You can run the troubleshooter to see if it finds the problem.
Also, have you uninstalled and reinstalled the microphone in Control Panel / Device Manger / Audio inputs and outputs? This may allow you to install the latest driver.
Please click the " Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Imac built-in microphone not working?

my imac built-in microphone is not working. I went to the system preferences/sound/input and could not see anything that was out of the ordinary. Now what?

How is it not working?
Please detail ALL you have done so far in the way of troubleshooting? Need this info to avoid the been there done that scenarios.

Toshiba Satellite E45t-B4300 built in microphone not working

Greetings,
Today I bought the Toshiba Satellite E45t-B4300. I was trying to use the built in microphone and it is not functioning. The video recorder appears to work fine. After searching around, I decided to download the most recent drivers from toshiba. I uninstalled the old audio device and installed the new drivers. After this process, the microphone still does not function. (Yes, I rebooted, and all standard good practices ) It appears to be listed in the recording devices and enabled. When I try to set it up, it does not detect any audio. Any suggestions would be appreciated. Oh it also runs Windows 8.1.
Thank you.
K

If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 457-7777.
- Peter

Tecra Z50-A-181- built in microphone not working/not found

Hi there!
I have recently purchased Toshiba Tecra Z50-A-181 laptop that came with Windows 7 64 bit (have 8.1, too but never installed it).
Anyways, once I started using it, I have discovered that the built in microphone is not working or not recognized at all.
So, what happens is that, once I plug in my headphones into the combined audio/mic jack, whoever I am talking to (on skype, let's say) stops hearing me (and my camera is turned on).
I have tried several things mentioned in other topics, however, the problem does not go off. Moreover, there is no driver for the camera or the built in microphone, or whatever.
In the device manager there is no additional device, not recognized and in the sound/recording options, no other microphone to use is shown.
I will appreciate it if anybody can help.
Thank you in advance!

Hi, Liam.
I have solved the issue.
Turned out,the combo audio jack has its minuses.
For the ones who might experience my issue, here is what I've discovered:
The new laptop's combined audio with a microphone jack can be used as such only with a headset with a microphone or a handsfree (which also has a microphone, as we all know) due to the fact they have 3.5 mm 4 pole plug.
If you plug in a normal headphones (ones without a microphone), your internal microphone is listening to the plug...but since there is no microphone on it, you cannot skype properly or use your internal microphone.
So, you have 2 options:
1. To use your handsfree earplugs or a headset with a microphone
2. To buy an audio splitter that will divide the combo jack into 2 separate ones - for a mic and headphones and then be able to use your standard headphones and internal microphone together, when needed.
I hope I will be helpful to someone else like me, who is also wondering why Toshiba made such a combo jack...actually, turns out it was simply to ease up the common user...obviously, not me
If anybody has anything else to add, please do so.
If not, thank you either way!

New Satellite M40-237: Built in Microphone not working

Built in microphone is not working properly, when i tried to record with sound recorder.. and when played nothing could be heard . Where the built in microphone is located in the laptop, user manual doesn't show this one. I've tried all settings in the control panel. However no use but when i connect a external mic throught the jack provided that is working fine.
Does this model Satellite M40-237 has built-in microphone??????
Pl. help me locate the mic in the note book. and fix this problem.
Message was edited by: chilsiva

Hello
According product specification Satellite M40-237 has no Audio internal Microphone.
Sorry

Isight and built in microphone not working. Is that normal??

Similar Messages

Maybe you are looking for