Isight audio does not record with video

isight audio does not record with video

Welcome to the forum.
Can you provide us with a bit more information, please?
What OS version are you using?
What are the full specs. of the AV file, that is not Importing with Audio?
What Project did you set up, at New Project?
Exactly what steps were used to Import that AV file?
Did you allow adequate time for PrE 12 to Conform the Audio portion of your file?
Good luck,
Hunt

Similar Messages

  • Audio does not fit with video FCPX 10.1.3

    Hi, I have a little bit unusual (at least for me) problem. I have old video from camera (maybe 20 years) on my HDD and I would like to edit it. Problem is the audio does not fit with video - when somebody talks it is apparently delayed. Can you give me a hint how to fix it in FCPX? I tried to detach audio and move just audio line but it is not possible.
    Thanks

    I tried it again from the beginning and now I can move audio to the right. I would just need to move video to the right, so audio stays still.. I need to delay audio so one option is to delete part of beginning of audio track or somehow move video to the right but it is not possible, i guess video track in the beginning cannot be empty....
    It is difficult to explain

  • Audio does not load with video

    The audio does not load with video in 12?

    Welcome to the forum.
    Can you provide us with a bit more information, please?
    What OS version are you using?
    What are the full specs. of the AV file, that is not Importing with Audio?
    What Project did you set up, at New Project?
    Exactly what steps were used to Import that AV file?
    Did you allow adequate time for PrE 12 to Conform the Audio portion of your file?
    Good luck,
    Hunt

  • Audio does not sync with videos

    Sometimes when I download videos from iTunes, the audio and the video are not in sync. This has only started to happen since I upgraded to iTunes 7. Is there a way to fix this or is it a problem with the download process?

    David, I'm monitoring the audio through the line out of my Mac Pro, using a small pair of powered computer speakers.
    It's a system I've been using for years, and haven't had a problem w the audio waveform not matching the audio I hear, until now.
    Thanks for your response!

  • Audio does not import with video

    When I drag my clip to the time line the audio is gone!!! Help

    It would be quite helpful to know what format the footage is, what camera it came from.
    First thing to try is this, assuming AVCHD or similar footage type from SD card -
    Copy ENTIRE card contents to hard drive, not just video clips. In Premiere, Import using the "Media Browser". See if that helps
    Thanks
    Jeff Pulera
    Safe Harbor Computers

  • On export audio does not align with video

    So I am learning pre for school and we have to place audio and video together. When I view this in Pre it plays fine but when I export it as quicktime they don't match ie audio 1 and video 1 are playing and it fades to video two and still playing audio 1 rather then audio 2.  Now the teacher is no help (go figure), the school support says its adobe issue and I can't pay adobe to help me pass my assignments. lol. Any help is appreciated.
    thanks

    Here are the requested images; also I don't want the audio to start exactly at start this the tiny space from  video start to audio clip but then the output is all off.

  • I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie.  Any suggestions to fix?

    I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie.  Any suggestions to fix?

    Thanks for the reply.  I tried playing with detaching the audio in iMovie, but with 20+ hours of video to correct, it would take too long.  After 28 hours, Corel/Roxio tech support replied that it is a known bitrate mismatch problem and they have no real fix.  I strongly suggest not to buy this product.

  • I imported a video and when I play it back, the audio does not match the video. When I view the tape in my camera it looks fine. I've tried imported twice and each time it doesn't match. What can I do to fix this?

    I imported a video and when I play it back, the audio does not match the video. When I view the tape in my camera it looks fine. I've tried imported twice and each time it doesn't match. What can I do to fix this?

    The default settings mostly likely use an audio sample rate of 32k. This doesn't work probably in FCP. You're probably better off capturing the tape in iMovie.

  • When using panasonic remote2 app, videos shot on iPad appear upside down on the television.  This does not happen with videos from other sources. Any suggestions?

    When using panasonic remote2 app, videos shot on iPad appear upside down on the television.  This does not happen with videos from other sources. Any suggestions?

    Hi Steve
    worldweary wrote:
    Thanks again. I tried channel 13 and it seemed to work better, with less dropouts (albeit not perfect) but sadly my slightly ageing laptop wouldn't recognise the network at all with the Hub set to that channel, so I had to switch it back to 11!
    Will try the factory reset at some point to see if that improves things.
    I have the same issue with my iPad when streaming videos...like the issue posted on ‎25-04-2014 18h36 by Steve.
    Steve - Can you kinldy clarify how you resolved the problem finally.
    I was infact planning to change the iPad or sell it off due to this recurring problem.
    Thanks and regards
    Siva

  • PVC2300 recorded audio is not sync with video

    Hi all,
    I have a big big problem with my new PVC2300 network camera:
    when I recording (from browser interface) the audio of the .avi file is not sync with video... in details in a record of 12-13 minutes the audio ends 8-10 seconds before the video... and I suppose that more lenght is the recorded file and more lenght is the desync between audio and video.
    I use MPEG4 video stream at 640x480 30 fps and audio G.711 A-Law in mode "simplex - listen only".
    For my usage this is a very big isssue... I hope there is a way to fix it.
    Thanks in advice
    Robert

    I tried for 2 days for all possible configurations, editing: frame rate, quality, resolution. and type of stream (MPEG4 or MJPEG).
    The only case that the recorded audio and video is sync is setting the SMB protocol to autorecord to a NAS.
    But this mode have a lot of problems (.asf  format, large file size and continuos recording without the ability to start and stop the recordings).
    I think that the desync is a bug (a very big bug) of yours activex control  that makes the recording.
    I have find more or less a workaround using the Cisco Client... the program get an error on start (after unintall and install few times, and a lot of test, I understand that the only way to use the Cisco Client is running it as administrator.
    Ok finnaly the cisco program works, but using it I found another problems:
    after recorded, I tried to export a part of recording for testing the audio-video sync... the program gives me 2 format: AVI (without the ability to choose any other options) and ASF (with quality options). I tried first AVI format... the result sucks: bad video quality, 1,8 GB every 20 minutes and audio desync... no comment! ...then I tried the second export format: ASF...thats OK, the result is good... audio finally is syncronized with video.
    My system is Windows Vista SP2 (32bit) and Internet Explorer 8... I tried also from an other pc with Windows 7... same problems recording from browser interface.  I have installed on my system the lastest video codecs (for example: divx etc.).
    For my usage I can use the Cisco Client but my ideal usage will be recording from browser.
    I think these problems are very serious for a product as is this camera.
    I hope there is a way to resolve they... maybe with a future firmware update or installing an other software.
    Thanks
    Robert

  • Audio Does not export with ideo in quicktime conversion

    I know i did something with a keyboard shortcut during the editing process, but i cant figure out what i did and how to change it back. What my issue is that when i try to export it to any format in quicktime (in quicktime conversion) the video is ok, but my audio does not export at all.
    I dont know what went wrong but i should note i pressed something on my timeline that i didnt realize what it did. Its hard to explain what it looks like, when you press on different clips all the clips on my time line quickly turn a more silver/light color and then change back to the normal color(not effecting the video quality just the thumbnails). But it is has a weird color
    is there a way i can reset all settings without adjusting my video clips?
    Sound settings
    Format: Lubear OCM
    Channels: Stereo (L R)
    Rate: 48.0000 hHz
    Render Settings:
    Quality: Normal
    Linear PCM Settings:
    Sample Size: 16 bits
    Checked: Little Endian

    Hi(Bonjour)!
    Does the audio play when you run sequence?
    Did you toggle off the monitor icon at the left side of timeline for audio track?
    When export to quicktime conversion, select quicktime movie and click OPTION.
    From this point, you should see a checkbox for SOUND. Be sure to check it ON.
    Michel Boissonneault

  • TS1718 Movie audio does not sync with movie

    Hi,
    The movies I have bought through iTunes store does not work properly. I bought two last week and when trying to play them back over the weekend, the audio is not sync'd with the movie playback. I have a Winodws 8 laptop and enough space for the films to be played. The software is all up to date and can therefore see no problem as to why this should not be working. Does anybody know of any way to resolve this to allow me to watch the films?
    Thanks,
    G

    Hello grs1989,
    Thank you for providing the details about the issue you are experiencing with audio out of sync with video in iTunes.  I found an article with steps to address issues with audio and video playback being out of sync:
    iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
    http://support.apple.com/kb/ts1362
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • After export audio does not match w/ video. ?

         I exported my movie from FCE, and the audio is off. It does not match the video, i see lips move but not w/ the sound. Can an help? -Thanks!

    Can you provide some specific info or steps you take?
    Al

  • HT5409 AVCHD audio does not play with the video clip

    iPhoto does not import, or even see the clips, and when QuickTime played the clip off the card itself, no audio is present even though the inspector shows stereo.              

    Morning Remigijus Biciunas,
    Thanks for using Apple Support Communities.
    Some devices don't appear in the regular import view of iPhoto. You can still use AVCHD video from these cameras by dragging and dropping or menu-driven imports.
    For more information on this, take a look at this article:
    Using AVCHD video with iPhoto '11
    http://support.apple.com/kb/HT5251
    Hope this helps,
    Mario

  • In AE CS6, the sound does not match with video

    Hi,
    I would like to ask a question. I have AE CS6, and I recorded a gameplay video with Avermedia Live Gamer HD. The format of this video is .mp4. When I import the .mp4 into the program, the sound does not match. On the original video, when i play with VLC or WMP, all things are good, and when i import, the sound does not good. What causes this problem, and can I do something to solve this?
    Thanks the answers, R3dLinE

    Check your footage interpretation, split the audio in an external program, convert the sample rate and import it separately or whatever. Most likely you simply have used unsuitable recording settings with odd sample and data rates.
    Mylenium

Maybe you are looking for