ISight Built in Camera on iMovie09 and speed problem. Please Help

Hello,
I recently installed imovie09 after using imovie06 for quite sometime. I am getting two problems for now. First, when my videos from iPhoto got imported to iMovie, the audio is working fine but the actual clip is skipping. Is this normal? For me to able to fix it, I have to go to clip adjustment and do convert clip all the time. This is really annoying specially My video will consist at least 7 clips. Is there any other way? Second, I tried to use the isight built in camera so it can be only one clip. I noticed that when I was filming, my audio and my actual video is not on the right timing and when its time for me to save it and play it back, it was skipping also! I recorded 1 minute video and it will only play for 12 seconds! To top it off, it's not the first 12sec of the video but it's actually skipping through out the one minute clip I did.
Can anyone please help me with this situation. I will very much appreciate it. I don't want to end up regretting that I upgraded to imovie09 only to find out things will be much complicated
Thanks,
Ashtoush

Hello Ashtoush
As you now know, iMovie '09 work differently than our iMovie HD 6.
Although your iMovie '09 offers many improvements over the previous iMovie '08 version, the older version imports the same way your iMovie version does, i.e., differently from iMovie HD 6.
User Jon Walker gives a complete explanation of your problem and offers workable solutions in this iMovie '08 forum thread:
http://discussions.apple.com/thread.jspa?threadID=1134921
It seems you will have to convert your existing clips using one of the methods detailed there.
For future video clips, you may want to choose a different video capture device that is more compatible with your new iMovie so you will not need to do separate conversion.
For Apple Help on importing into your new iMovie, take a look at the suggestions here:
http://docs.info.apple.com/article.html?path=iMovie/8.0/en/11612.html
http://docs.info.apple.com/article.html?path=iMovie/8.0/en/10359.html
http://docs.info.apple.com/article.html?path=iMovie/8.0/en/11497.html
http://docs.info.apple.com/article.html?path=iMovie/HD/en/im6.html
http://support.apple.com/kb/HT3290
http://docs.info.apple.com/article.html?path=iMovie/8.0/en/10331.html
http://docs.info.apple.com/article.html?path=iMovie/8.0/en/9835.html
EZ Jim
G5 DP 1.8GHz w/Mac OS X (10.5.7) PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Similar Messages

[Other 865 Series] 865PE Neo3-F (SATA and PATA problems),please help,thx

Hi
I have MSI 865PE Neo3-F mainboard and I have a few little problems with Neo.
My first:
I have HDD Maxtor DiamondMax10 300GB,16MB cache,SATA.When I was installing Windows,(widows setup) it shows that HDD has only 131GB.BIOS shows 251GB.what does it mean?Not supported HDD or only 130GB for one partition?
My second:
I want to connect also P-ATA HDD,but BIOS don´t see him.
What would be IDE settings in BIOS and also jumper settings on PATA HDD and DVD when I want use:
SATA as Primary Master (system disk)
PATA as Secondary Master
DVD-ATA IDE as Secondary Slave
My last:
What I should installing when I want to use all advantages of SATA HDD and what would be BIOS settings?
PLEASE HELP IT IS URGENTLY,CAUSE I HAVE TO WORK TO MY SCHOOL
ANY HELP WOULD BE APPRECIATED.
Thank you

At the first thank you for your reply.
Yes it works.
Sorry I didn´t post my OS.My OS is XP (with SP2,now).
Configuration:
P4 Prescott 540J 3.2GHz,FSB800MHz,HT (enabled)
MSI 865PE Neo3-F
2x APACER 512MB DDR400 (Dual channel,slot 1 and 3)
ASUS FX5700 256MB
Maxtor DiamondMax10 300GB,16MB cache,7200rpm
DVD-RW Plextor 716AK
After installing Service Pack 2 windows shows that HDD has 300GB,but I created two partitions before (C:\ [30GB] and D:\ [100GB] in windows setup) and now (after install SP2 E:\ [170GB]) one partition in Windows.Problem how do I put together last two partitions (D:\ and E:\) to one partition?
so if I right understand after this settings in BIOS:
Native Mode
ATA Configuration - PATA only (or SATA-only)
SATA Keep enabled - yes
PATA Keep enabled - yes
PATA channel selection - both
and what about another two options in this menu?what are the settings?(somtehing about 1st channel and so on)
connections looks like that:
on IDE ATA100 cable from IDE1 will be connect HDD ATA100 as Master and DVD as slave?
on SATA cable from SATA1 will be connect HDD SATA?
How system knows which one from two Masters HDD is System disk?from Boot menu?
Is some page on the web where can I find closer explain of IDE (SATA) settings for MB MSI?
Sorry for questions,but I am working at the first time with SATA disk

The update and other problems PLEASE HELP!!!

The ovi store on my phone asked me to download the newer version which I did, is there an update for ovistore on the computer because I haven't heard about it if there is one and it may solve the problems I have been having with it:
1. I don't receive the messages when trying to get an app
2. It wont let me down load apps when I connect my phone to the computer
(also on the nokia website it told me to click the download and install button to get an app when plugged into the computer but I can't find it..Any ideas where it is???)
please help i've had this problem since I first set up my account and its really bugging me now!!!!!!

(Apologies for barging in Steve.)
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 80071A91, or some other number? (If they're another number, what number are you getting?)

Movies and Audio Problem - PLEASE HELP!!!!!

Hi,
If I am working on the music for a movie file i sometimes open a new project with no global tracks, so as i can focus on the music, when i then choose to open the movie and see what the music sounds like with the movie all is fine..... until i stop the movie. If the movie is not playing or doesnt have the volume slider raised high (on the movie window), no sound is heard when i press a key on my midi keyboard. This means i can only come up with ideas when the movie is playing. If i close the movie and/or the global tracks, the problem remains the same. I have to close logic an reopen it in order for me to hear any sounds (audio tracks and midi). Any advice or help would be great as this is really frustrating me. Thanks, Ben

I use Logic Plug ins and Korg/Steinberg plug ins. I have a multi instrument set up in my environment for an external Korg Trinity Keyboard. It is no longer connected as it was too difficult to control program changes etc and recording in audio takes too long for me. This many be the problem??? Maybe i could remove the multi and see if this helps. I am thinking of re-connecting the Korg to my computer but am not sure if it will cause more problems. Any advice? Thanks... Ben

Substri and instr problem --Please help

Hi ,
I would like to get the find tablename starts with 'EXP' using substring and instring . I am using oracle 9i. Please help me out
Example : 'Schema.explogtable'
I will use table name ' EXP' in one of my procedure as input parameter to procedure
If tablename= substr('schema.explogtable','instr('schema.explog','.',1,3) then
Execute Procedure1('tablename')
Else
Execute procedure2('tablename')
I would appreciate your help
Regards,
Clarkc

ClarkC,
Here just replace procedure1 and procedure2 with your procedure names;
create table temp_table
( table_name varchar2(30)
insert into temp_table values ('TESTME.MY_OBJECTS');
insert into temp_table values ('TESTME.OBJECTS');
insert into temp_table values ('ABC.ECFOBJECTLOG');
insert into temp_table values ('XYZ.BDEOBJECTTABLE');
insert into temp_table values ('ABC.ABCTABLE');
insert into temp_table values ('ZYD.CLIENTTABLE');
insert into temp_table values ('NMS.CLIENTLOGTABLE');
COMMIT;
pl/sql anonymous blocks I defined 2 variables for readibility and understanding
DECLARE
   CURSOR tcur
   IS
      SELECT table_name
      FROM temp_table;
   table_name   VARCHAR2 (40);
   my_table     VARCHAR2 (40);
BEGIN
   FOR cur IN tcur
   LOOP
      my_table     := NULL;
      my_table     := cur.table_name;
      table_name   := SUBSTR (my_table, INSTR (my_table, '.') + 1);
      IF (table_name LIKE ('%OBJ%'))
      THEN
         DBMS_OUTPUT.put_line ('table_name containing OBJ=' || table_name);
         -- NOTE : CALL YOUR PROCEDURE1 HERE for tables containing OBJ;
        procedure1(table_name);
      ELSE
         DBMS_OUTPUT.put_line('table_name not containing OBJ=' || table_name);
           -- NOTE : CALL YOUR PROCEDURE2 HERE for tables not containing OBJ;
        procedure2(table_name);
      END IF;
   END LOOP;
EXCEPTION
   WHEN OTHERS
   THEN
      DBMS_OUTPUT.put_line (SUBSTR (SQLERRM, 1, 300));
      RAISE;
END;
Here is the output of the above block
table_name containing OBJ=MY_OBJECTS
table_name containing OBJ=OBJECTS
table_name containing OBJ=ECFOBJECTLOG
table_name containing OBJ=BDEOBJECTTABLE
table_name not containing OBJ=ABCTABLE
table_name not containing OBJ=CLIENTTABLE
table_name not containing OBJ=CLIENTLOGTABLEHope this helps
Regards
Edited by: OrionNet on Jan 17, 2009 11:48 AM

Itunes connection and Passcode problem (Please Help!!)

So, my computer recently was broken beyond repair.. so when I got a new computer and redownloaded itunes i tried to connect my itouch to charge it and i noticed it said "Itunes cannot open ipod in library please imput password on ipod" I never put a password on it... aparently one of my friends did. So I was being a total DA and attempted to guess the password too many times now the ipod's disabled untill i can connect to itunes and itunes wont let me connect untill I get the password, I'm at a total loss please help!

You need to place the iPod in recovery mode and then connect it to your new computer and restore it via iTunes. Note that you will lose all content on the iPod. You can redownload apps at no additional cost provided you are signed into the same iTunes account that originally purchased the apps.

Iphone 4s and iPhoto problem - please help me!!

Hi there
I have searched the discussion boards for an answer to my problem, but cant find one yet.
I have a brand new imac with Mavericks installed and up to date. My iphoto is the latest one according to the app store and I have ios7.0.3 on my iphone 4s.
I have about 300 photos on the iphone and i connected to the imac with a usb cable and it appeared as though all the photos were imported in the usual way, so i agreed to delete them off the iphone when prompted to do so.
However, the events for the appropriate dates have been created, but they are grey and all claim to have 0 photos in them.
When I look at last import, it says that the last import was the import I did a few days ago and appears to ignore the one I have just done.
Please can anyon help me find where my photos are in a simple way. I am getting very cross and frustrated. I have used macs for 7 years with no problems until this.
I would also add that my iphoto is very slow and regularly stops responding so that I have to force quit.
Help appreciated!
Thanks a lot
Nick

Thanks to LarryHN and Old Toad, my problems are nearly over, I hope.
I did the repair and, thankfully, my missing photos are back.
However, I now have about 100 photos which are on my iPhone 4s camera roll and when I plug the phone in, it says that it has already imported them, but I can't find them in iPhoto!
I can see the pictures on the mac when the phone is plugged in and I look on the iphone, but I cant see where they are.
Do you think that having photostream has complicated matters at all?
Also, why does the photo stream on my phone (and ipad) show more photos than the photostream folder fir Nov 2013 in iphoto? Is there a delay in appearing in iphoto?
Finally, about 3 out of 5 times, iphoto becomes really slow and stops responding, requiring a force quit. Any ideas why this is and how to fix it?
THis is a great forum, thanks to everyone for help so far.
Nick

G580 Very slow, and mouse problems, please help

I purchased a brand new G580 approx 2 weeks ago.
It has 4GB of memory compared to my old lenovo which had 2GB. This new one runs at half the speed of my old one and has nothing on it (i.e pictures, music, vids etc)
If i open a programme to do something and then open another, it cannot cope with it and will take forever to do anything on the 2nd programme when it eventually opens.
also the mouse wanders! I dont have to be touching it or doing anything near it, it just wanders across the screen which is getting very annoying.
Please could somebody help me?

Hi kiri_tc,
Welcome to Lenovo Community Forums!
I’m sorry to hear that your G580 Laptop is not performing as expected and the cursor is moving erratic, re-installing the Touchpad driver should resolve this issue and let me know the OS (Operating System) that is installed in the computer and the country where the computer was purchased, also the Type of G580 for providing the steps to resolve performance issue and exact touchpad driver link. Below is the link to locate the model number and Type of the computer which is mentioned on the sticker at the base of the Laptop.
How to find the Serial Number (S/N) and Type of your computer
Hope to hear back soon
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Nokia E61i and iSync problem - Please help!

I had the Nokia E62 and I was syncing with my macbook pro without any any problems. Last week I got the Nokia E61i and installed the plug-in for the isync from the nokia website. I have been unable to sync the 2 phones. I have deleted the phones from isync and reset the phones but no luck. I have tried both bluetooth and cable. The isync connects to the phone but give me an error message - "An unexpected error occured. Device 'Nokia E61i' synchronization failed"
Please I need someone to help me resolve this problem.

This Apple Tech Support Document seems to mention exactly your error:
iSync: Error message when synching phone via Bluetooth in Mac OS X 10.4.9 or later

Nested Repeater and Binding Problem - Please Help

I have nested repeaters and binding seems to work with the
outer repeater, but not with the inner repeater. I have boiled it
down to a pretty concise case. If someone could offer hints I would
be most appreciative!
I understand the objects I am using to store data could be
different, but it only looks strange because I had to boil down a
complex case to a simple case.
Type a user and then an email address then click to add them,
the user TextInput and label gets created, but not the email
address label and text input.
Basically I want users in an ArrayCollection, and their
multiple email addresses in an ArrayCollection stored in an Object,
where I get that email ArrayCollection using the user as the key to
the object acting as an associative array.
The attached code should compile fine, so please have a go at
this. Thanks!

"Greg Lafrance" <[email protected]> wrote in
message
news:gn5p1k$cv9$[email protected]..
>I have nested repeaters and binding seems to work with
the outer repeater,
>but
> not with the inner repeater. I have boiled it down to a
pretty concise
> case. If
> someone could offer hints I would be most appreciative!
>
> I understand the objects I am using to store data could
be different, but
> it
> only looks strange because I had to boil down a complex
case to a simple
> case.
>
> Type a user and then an email address then click to add
them, the user
> TextInput and label gets created, but not the email
address label and text
> input.
>
> Basically I want users in an ArrayCollection, and their
multiple email
> addresses in an ArrayCollection stored in an Object,
where I get that
> email
> ArrayCollection using the user as the key to the object
acting as an
> associative array.
I wouldn't bind to methods like that...I'd make properties
and bind to
those.

E72 and email problem, please help me

Hi There,
when I want to setup me emails in E72, I do following steps:
1) Select "@Set up e-mail" from home page of E72
2) "Start" E-mail set up
But the point is I have not bellow menue (#3) and E72 deal with my gmail or yahoo as other emails and I have to configure them manually!:
3) It lists a number of email options as follows: Ovi Mail, Yahoo Mail, Google Mail, Windows Live Hotmail, Mail for Exchange, Lotus Notes Traveler, Other
How can I solve problem?
Thank you

The way that worked for me, after suffering many times from trying to setup my gmail account.
1-Restore phone to factory settings
2-Setup you packet data (mobile carrier) internet access (EVEN IF YOU HAVE WIRLESS LAN)
3-Set up you email by adding your account and allow phone to use (mobile carrier)
4-You could choose way of connecting to server (you could choose then wirless lan ) only if you want.
Good luck and let me know if it works!
Ahmed

Nokia N80 and LifeBlog problem(Please Help)

Hello
I bought my n80 a week ago and I bought a 1GB memory card,so I moved all the files from the 128MB memory card to the 1GB memory card,anyways when I switched my mob on I had to install life blog again,but when I try to start the programme it wouldn't start, so I sent the aplication again from the old memory card to my phone using PC SUITE,anyways I just wanted to know whats the difference between those two file:
LifeBlog_Installer
LifeBlog
because when I installed LifeBlog_Installer the programme wouldn't work,but when I installed LifeBlog it worked perfectly, is it ok if I deleted LifeBlog_Installer?

This Apple Tech Support Document seems to mention exactly your error:
iSync: Error message when synching phone via Bluetooth in Mac OS X 10.4.9 or later

Flash layer problem and sound problem - PLEASE HELP

http://www.alamofireworks.com/echo/flash.html
I am having an issue with the pulldown menu is going behind
the flash file. I have already tried the param wmode and z-index
and can't figure it out.
Also the when you hit stop sound and the video loops the
sounds comes back and i am not sure how to control.
Any help would be appreciated.

http://www.alamofireworks.com/echo/flash.html
I am having an issue with the pulldown menu is going behind
the flash file. I have already tried the param wmode and z-index
and can't figure it out.
Also the when you hit stop sound and the video loops the
sounds comes back and i am not sure how to control.
Any help would be appreciated.

Curve 8330 Voice dialing and sound problems, Please help!

I got this black berry curve 8330 from a friend on the weekend to replace my broken Pearl. He said it worked fine but it sometimes had a voice dialing problem. After wiping all the personal data and activating the phone the voice dialing went nuts. Every 6 to 9 sec the voice dialing would activate with no sound. meaning you don't hear the lady voice say, "say a command". After reading many forums posts I download memmax and removed all VAD files. But I will still left with no sound. I went and did a test on the hardware and the speaker and microphone both worked fine. Puzzled I tried playing a ringtone, , it plays maybe the first second of the file and then the sounds goes away but I am able to get it back by press the Speaker/$ key. I then tried making a phone call and the phone was working just fine. About an hour later I tired calling someone and the issue had raisin again. This time I was unable to get the sound back. (I tried resetting many times with no success.) I could still play media files, but was unable to get sound making or receiving calls (this includes the other party not being able to hear me as well.) I tired changing profiles with no success. I then did some more reading and tried updating the OS. Once that was done and voice dialing had been reinstalled and started acting up again. SO I removed it and basically everything happened all over again. So right now I have a phone that I can’t make calls on but I can still text and use the internet. Does anyone know a solution to this problem? Should I try wiping the OS and reinstall or is this phone toast?

The msi nforce package 2.29 fixes the NVMCP.SYS error and turns it into a very rare system freeze. 8o
Very rare!
been waiting almost 9 months for this fix so i could pull the damm soundblaster out! :O

App Store, Safari, and Netflix Problems, please help

Im showing a strong wifi connection with my ipad 2, but when trying to access itunes or the app store, the pages wont fully load. Some of the thumbnail images will only show ? Marks and sometimes page wont even load at all until i try it again. Same happens in safari and netflix. My iphone 4 is working fine however when just on wifi. Ive tried resetting network, hard resets and a bunch of other tricks, but nothing working. Some apps are working fine, but why would this be happening with itunes, safari, and netflix? Does anyone have a solution?

I see you wrote your question at 1:05 AM. Chances are it didn't get read much as some of us who spend a great deal of time here helping people, just might have been asleep. Sarcasm won't help you much.
Now, have you actually fully closed the apps, then reboot? To fully close the apps, go to your home page, then double tap your home button to bring up the task bar (most recently used apps). Hold your finger on any of the recently used apps until they all start to jiggle. You'll see a on the top left of each app. Touch the minus on each of the apps you're having trouble with to fully close them. Then touch your home button once more to stop the apps from jiggling and then again, to return to your home page.
Then, do the hard reset (in case you didn't do it properly). Press and hold BOTH the home and power buttons at the SAME time for at least 10 seconds (ignore the red slider) until the Apple Logo appears, then let go of both buttons and your iPad will restart.
Try the apps after your iPad comes back up and hopefully, they will work correctly.

ISight Built in Camera on iMovie09 and speed problem. Please Help

Similar Messages

Maybe you are looking for