ISight camera can't be recognized. Do I have to reset PMU?
Can anyone help me...?
nieyihemu wrote: ... iSight camera can't be recognized. Do I have to reset PMU?
Perhaps.
• If you have not already done so, restart Mac and
try again. If the iSight still does not work, continue.
• If Apple's http://support.apple.com/kb/HT2090
suggestions do not help you, (be certain that you
use the correct PMU/SMC "reset" procedure for your
Mac model), yours may be a hardware problem
that will require a professional fix.
• Test more than one Apple app in more than one
user account. If the problem persists with all,
Unless you have a current backup, make one now.
Then use the final "Troubleshooting" suggestion:
"... contact Apple or an Apple-Authorized Service Provider for service."
• If you want to try one more thing on your own first,
use Disk Utility to repair permissions. Then
download and apply the latest Combo Update for
your OS. Currently, the latest SL Combo is here:
http://support.apple.com/kb/DL1399
• Repair permissions again immediately following the system restart
that completes the Combo update.
Properly applying the Combo version of updates can sometimes correct software problems, but, if your trouble is caused by a hardware problem, there are no user serviceable parts of iSight so see your AASP if the Troubleshooting suggestions don't work.
Message was edited by: EZ Jim
Mac OSX 10.7.4
Similar Messages
-
my isight camera was not working. so i tried to smc reset it as said in apples support community but now wat happened is my macbook pro don't charge, it don't show any light for checking charge, nor it starts up. please help. Thanks
Try zapping the PRAM. See KB Article http://support.apple.com/kb/PH11243 OS X Mountain Lion: Reset your computer’s PRAM
If you are still under warranty and/or have AppleCare, call them. Let them deal w/it. -
i have a classic that seems to be stuck in restore mode, the screen says "do not disconnect'' and i can't restore using itunes. i have tried resetting it and still no good, what can i do to fix this problem ?
Be good to know what the diagnostic results are.
I've also just run into an issue where I couldn't restore an iPod with a corrupt file system, and the "super fix" in that linked article wasn't working for me. I've run across a potentially useful workaround.
iPod Classic went on the fritz today just after syncing. Couldn't restore via iTunes, kept getting 1439 errors, Windows wouldn't format as FAT32, claimed the "Volume is too big for FAT32". Finally tracked down EaseUS Partition Master Home Edition (Free) and formatted as FAT32 with 128k clusters. The iPod is filling back up again. Might be worth a shot here...
tt2 -
Hi,
I was hoping you might be able to help, I am having problems turning my isight camera off, i didn't turn it on and am not sure how to turn it off as I can't see any application windows,
I'd really appreciate your help,
best wishes
katrinaHi Katrina, you may need to have it serviced...
http://discussions.apple.com/thread.jspa?messageID=8955538
http://discussions.apple.com/thread.jspa?messageID=8957727
But if you just want to diasable it...
http://osxdaily.com/2007/03/26/how-to-disable-the-built-in-isight-camera/
http://codesnippets.joyent.com/posts/show/1053 -
Can only print ONE document then have to reset Airport Express to print aga
The title says it all.
Everything used to work fine until I installed Leopard. Now I can only print one document; subsequent documents will hang at 16% or 28%, etc.
Anyone else had this problem?
Thanks,
MarkNo, you are not the only person with the problem. I have tried it with both a "g" and an "n" Express (I bought the "n" hoping it might work better; nope). I have a Samsung CLP-510 plugged in to it. It prints one document, then I have to reset the Express before it will print again. When it tries to print the next document, it flashes "Unable to open device (read failure)!" briefly, then pauses the printer.
It's been driving me crazy since I installed Leopard, so I basically gave up on the Express as a print server as there seems to be no cure, and Apple seems to have no interest in fixing it. (I have been through several firmware updates since the problem started, and none have made any difference).
+Oddly, though, just now after the seventh reset, it accepted 6 of the documents in my queue (I had 22 in the queue, and I've just been waiting for it to pause, then resetting the router for each document) before it failed.+
Message was edited by: The Technomancer -
ISight camera is no longer recognized
iChat only allows me to audio chat and photobooth says there is no camera. Whats should i do?
http://support.apple.com/kb/HT2090
-
Help! My front camera hangs whenever i'm using it.
LarryHN wrote:
In the future it is best to stay up to date and not wait year to update - either update soon after releases ro stay with the software you have and like - waiting years and then upgrading is not a good idea
Yeah, those of us who use macs for paid work must wait until our 3rd-party software vendors upgrade before we can upgrade. There are only two ways to solve this problem,
If Apple were to stop actively sabotaging their customers' work; or
if I were to migrate my employer to Windows.
Only the second option is even marginally within my control...
(Keeping my employer on os x is getting harder and harder as Apple drives the 3rd-party software developers out of the market, and breaks the software of the dwindling customers -- end users and 3rd-party developers -- who remain.)
Anyway, thanks for the pointers. I am going to see if I can track down iPhoto 9 on one of the mavericks machines I set up last fall. -
my sons face time no longer works since the first upgrade was wondering how to get it back to as if its just out of the box or what to do for facetime thanks
iOS: Troubleshooting FaceTime
Make sure both devices are fully updated. See:
Unable to make or receive FaceTime calls after April 16, 2014 -
I have an iphone 4 and have always been able, until recently, to access emails and internet. I have tried resetting everything, without luck. Any ideas?
Hi Sampolitis,
If you are having issues with an iPhone accessory, try the troubleshooting steps in this article.
Troubleshooting iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/TS2634
This article outlines basic setup and troubleshooting suggestions for using Bluetooth accessories with an iOS device.
iOS: Third-party Bluetooth headsets, headphones, and keyboards
http://support.apple.com/kb/ht1664
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Hope this helps,
Mario -
I have a late 2006 MacBook Pro with built-in iSight Camera, which is not recognized by any app. It's not on the list at the System Profiler USB devices. I have 10.6.8 installed, and I tried already reseting the SMC, with no result. What can I do?
How to Troubleshoot iSight
http://support.apple.com/kb/HT2090
MacBook Pro, Mac OS X (10.6.7), 2.4GHz IntelCore i5 320 HD 8GB RAM -
IMovie 8.0.6 doesn't recognize my iSight camera.
I have a Mid 2010 MacBook Pro running OS X 10.9.5;
iMovie 8.0.6 doesn't recognize my iSight camera. The iSight camera works on Skype, Photo Booth and FaceTime. I hadn't used iMovie in almost a year, however, the last time it recognized the iSight camera without a problem.
Does anyone have any ideas on how to fix this?
Thanks!rudsmac4me,
The article linked below details a potential solution that may help get iMovie to recognize your iSight camera.
In iMovie 7.1.2 or later, you may not be able to use your built-in iSight camera to capture footage in iMovie. iMovie may not recognize the camera. This may occur even if you are able to activate the camera in other applications, such as iChat.
iMovie '08: Built-in iSight camera not recognized
http://support.apple.com/en-us/TS2472
Cheers,
Allen -
Photo Booth don't detect my isight camera...?
It worked like 2 days ago, but now it seems my isight camera can't be found anymore...Help
Yeah, check with your Ichat. If not, unplug the camera and try again? Or restart your computer? Or do both. Sometimes the computer just loses sight of it, no pun intended, and needs to kind of restart the process. It's not a huge problem, whatever it is can be easily fixed. If that doesn't work there are many other options, it may be something under your preferences?
-
Built in iSight camera quality
I have found that when I turn the built in iSight camera on my MacBook Pro for video through Yahoo, AIM or even Photo Booth, the auto setting results in an image which is too dark. When I put my thumb over the camera and let go, the image looks good until the auto white balance "corrects" the image and I'm back to a dark image.
Do I have a faulty camera, is it a faulty system, is there any adjustment I can make?
TIAI find the internal iSight cameras, in both the MBPs and iMacs, have difficulty in many situations where lighting isn't perfect. So try increasing the available lighting, especially to your facial region. Additionally, try getting closer to your camera if you can. Sounds odd but I think part of the lighting calcluation is lighting from your display.
-
Macbook Air 2013 OSX 10.9.2 iSight Camera not working
Hello to everyone!
I have a problem here in my new macbook air 2013.
Since I updated my osx to 10.9.2 my iSight Camera is not working anymore. I tried to reset the SMC and PRAM without results. I also checked the permissions on my hard disk without any result.
I've also tried to delete my AppleCamera.plugin file from /Library/CoreMediaIO/Plug-Ins/DAL/ and I tried to use another one from OSX 10.8.4 but it's not working.
What can I do more?
Is there any way to fix this problem without formatting?
Regards,
Marco Aliolimarcoalioli wrote: ... What can I do more?...
Some other ideas in iSight camera failure after OS X 10.9 Mavericks update -
I am unhappy with the clarity of my iSight camera when sending video emails. I have tried sitting at various distances, but none of them are acceptable. I have used other cameras that are much better. Is there a way to adjust the focus of my iSight camera for a sharper image?
Thanks for your suggestions!Hello Steeler Nation,
And Welcome to Apple Discussion!
Sorry to hear your not happy with your isight. Just a couple of questions to clarify(no pun intended) what you are experiencing. You are using the iSight cam to record short clips and are then attching them to email?
Have you tried more light?
Asuming so, you might try iGlasses found here:
http://www.ecamm.com/mac/iglasses/
to see if that works on their free trial, but you also could have a possible focus problem.
If possible perhaps you could send me a short clip to demo what the clairty looks like. Or if not, additional details might help.
Respectfully,
Bill Gallagher
Maybe you are looking for
-
i want to change region but i have 0.70$ i want to remove it , can you help me ?
-
Dell Computer Problem + DAQ1200 + RS232/4
I try to install NI HW in my new Dell GX240 (1,76GHz P4, 256MB) NI-PCI-1200 Slot4, PCI-Bus:2,device:10,function:0 IRQ:19, DMA0,1,2 NI-PCI-232/4 Slot3, PCI-Bus:2,device:9,function:0, IRQ:18 SW: Labview 6.1 // Windoof 2000 Driver Version: NI488 1.7 NI
-
No PL/SQL windown in Forms-10g Debug
Dear gurus...I used to use a PL/SQL window in 6i forms debug tool which displayed at the bottom of debugging module. It was very useful to look at the database values of current session but I'm unable to fine this PL/SQL interation tool in 10g Forms
-
Hi Experts, Could you please find it possible in your busy lives to spend a few seconds on a newbie? Here is the Scenario: XI 2.0 on WEB AS 6.2, BW 7 NetWeaver 2004s WEB AS 6.4... I have a situation at a client where they insist on providing BW 7 wit
-
Scanning with HP deskjet under OSX 10.9 Mavericks
Saving a scanned document results in a completely black picture. HP says that update should have been automatic with Apple Update Support but there is nothing there to solve the problem.