Isight camera is not working anymore

Hi chaps, unfortunately my isight camera is not working anymore. It has worked fine so far, but now the camera is not even listed anymore in profiler hardware list. Hence, no clue what to do.

marcoalioli wrote: ... What can I do more?...
Some other ideas in iSight camera failure after OS X 10.9 Mavericks update

Similar Messages

  • HT3964 Hello, my isight camer is not working properly, i was using photo booth and suddenly the image was black or too dark and also ichat and facetime are too dark as well, please helpme out i can not find any solution.

    Hello, my isight camer is not working properly, i was using photo booth and suddenly the image was black or too dark and also ichat and facetime are too dark as well, please helpme out i can not find any solution.

    read this and see if it helps: http://support.apple.com/kb/ht2090

  • My isight camera was not working. so i tried to smc reset it as said in apples support community but now wat happened is my macbook pro don't charge, it don't show any light for checking charge, nor it starts up. please help. Thanks

    my isight camera was not working. so i tried to smc reset it as said in apples support community but now wat happened is my macbook pro don't charge, it don't show any light for checking charge, nor it starts up. please help. Thanks

    Try zapping the PRAM.  See KB Article http://support.apple.com/kb/PH11243 OS X Mountain Lion: Reset your computer’s PRAM
    If you are still under warranty and/or have AppleCare, call them.  Let them deal w/it.

  • IMac 27': iSight camera is not working but it is recognized in Utilities

    My iSight camera is not working. I'm sure it is not a hardware problem, because when I reinstalled MacOs Lion it worked for some time. I'm sure is a software problem. When I run FaceTime appears the message that "No camera is connected", also in Photo Booth is not working.

    (1) First, be sure connections and other issues from 
         here are eliminated as possible problem causes:
           • http://support.apple.com/kb/TS2400
           • http://support.apple.com/kb/TS3544
    (2) Then, if Apple's http://support.apple.com/kb/HT2090
        suggestions do not help you, (the "reset" suggested there
        often restores normal function,) continue with the following.
    (3) Use Disk Utility to repair permissions and then
        download and apply the 10.7.2 Combo Update:
         http://support.apple.com/kb/DL1459
    (4) Repair permissions again immediately following the
         system restart that completes the Combo update.
    Properly applying the Combo version of updates can sometimes correct problems like yours.
    Message was edited by: EZ Jim

  • I upgrade my iph4 to ios 7.1.2 and the microphone is not working on video camera, is not working anymor also the microfon on speaker mode, please help me

    Hy guys, i upgrade my ios 7.1.1 to 7.1.2 and now iths not working anymore my microphone on video record, the camera is working , is recording but without sound, and also the microphone on speaker, when i activat the speaker the microphon is not working. I do a full reset on my iph but still not working , also my girlfriend have same problem.Please help me, thx.

    To rule out a software issue, try to set it up as new device, without using the latest backup, explained in this article:
    How to back up your data and set up as a new device
    If this does not help, the problem might be hardware related and the phone needs to be serviced by Apple or an Authorized Apple Service Provider:
    iPhone - Contact Support - Apple Support

  • My built in isight camera is not working since loading mavericks

    Can anyone help me please? I can't seem to get the isight built in camera to work on my 27'' imac since I installed Mavericks. First noticed this when using skype but it also doesn't work on facetime either.
    Any suggestions.
    Thank you
    Nick

    briannick wrote:...I can't seem to get the isight built in camera to work on my 27'' imac since I installed Mavericks....
    If restarting Mac does not resolve the problem, use Disk Utility in OS X Revovery  to repair your startup disk.
    If the camera is still not working properly, follow Apple's http://support.apple.com/kb/HT2090 suggestions. 
    (Over time, Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD."  Regardless of the name of your Mac's built-in camera, the same info and troubleshooting applies.)
    If the problem the problem continues after using all the above, the last thing you can try is to reinstall OS X 10.9.
    If that fails, too, contact Apple or an Apple-Authorized Service Provider for service.
    Message was edited by: EZ Jim
    Mac OSX 10.9

  • ISight camera/iChat not working HELP!  Also, how can I get PhotoBooth?

    Hi,
    A friend and I are tring to use iChatAV but it just does not seem to work.. I can see my picture and the mike on the camera works on my machine but neither of us can see or hear each other.
    Text chat works fine.
    We are both running wireless routers but our MAC are hard wired to the machines NIC so wireless is not a factor here. I am using a Linksys WRT54GS... I also have the firewall in OSX turned on. Are there ports I need to open to get this to work? If so how?
    Also I bought the iSight camera and just assumed that Photobooth would come with it... It doesn't seem to have been included. My buddy sent me version 1 but I am not sure if it's compatible with the Intel MacPro... how do I get it?
    Any ideas?

    Hi
    Goto the linksys setup page and then goto the Adminstration option you should find UPnP which you should turn on.
    Restart ichat.
    You have a Macbook Pro which should have a built in iSight and photobooth should be in you application's folder.
    Tony

  • Why is my iSight camera is not working with the new Mac Pro?

    I connected the iSight camera which is a FireWire 400 into a Sonnet FireWire 800 adapter, and connected that into a FireWire to ThunderBolt adapter and plugged directly into the Mac Pro running Mave. I receive power, noted by the green light coming on, but the computer does not recognize a camera. Does anyone have an idea why this is.

    We are all busy with many other problems in Pages 5.
    Unless you have found some real reason to use Pages 5 just go back to Pages '09 which should still be in your Applications folder, until Apple sorts this all out.
    Peter

  • Red Camera Button not working anymore

    so the red camera button wont let me take pictures anymore and i want it back, anyone else having the same problem

    james79719 wrote:
    yes i am pushing it all the way down and if the remap app is going to cause more problems forget. WHOM EVER TURNED IT OFF WITH THE LAST UPDATE NEED TO TURN IT BACK ON OR GIVE ME THE OPTION OF HAVING IT OR NOT. MY PHONE NOT YOURS.
    Like it was said, the button was not turned of by any updates, your problem is most likely software related..  If it is really bothering you and want to isolate the issue just do a hard reset and take everything out of equation.  Safe mode option may work but there is also a chance if a app changed this that that it could have override the program settings that can be retained in safe mode, I have ran into this before and just want to let you know Safe Mode may or may not guarantee trouble solution.
    Cody21 wrote:
    Question:  did you install the app called "NO LOCK" ??  I had exactly the same issue on my phone after installing it. After hours of trouble shooting, I discovered that APP to be my problem and after uninstalling, the button worked as designed.
    That is strange that No Lock causes you issues when I haven't had any issuers using it, shows that the difference in the combination of software on a device does make a difference..

  • Camera Connector not working anymore with iPod Video

    Hello,
    I have a iPod Video 60GB which I bought last year along with a Camera Connector.
    The problem I have, is that the Connector isn't recognised by the iPod anymore. Even when the camera is on and connected at the other end. The camera is a Sony DSC-V3 which has worked fine before.
    But, I'm assuming the problem is with the Connector since, before the iPod would recognise the connector and show the 'connect device' screen.
    The iPod still says, 'connect device', when I go through the menu and choose Photo>Photo Import
    I've been tearing my hair out for over a week with this, with no luck.
    Any insight as to how I could fix this? Also, has anyone else come across a similar problem?
    Thanks and best regards,
    Chris
    Intel P4   Windows XP Pro  

    i'm no expert on this topic. but, fingers crossed, the troubleshooting suggestions in these documents might be of some help:
    How to use the iPod Camera Connector
    iPod Camera Connector: Choosing a photo importing protocol on a camera

  • My iPod touch 4g camera is not working anymore any help?, My iPod touch 4g camera is not working anymore any help?

    My camera stopes working I stared using a 3rd party app it worked for about 3months but has stopes working again anybody have this problem and fixed it or any ideas how to fix it?

    Try #2 and #3 in link below. If neither work, you most likely have a hardware issue.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • Built in camera does not work anymore

    I have the Toshiba Satellite L655 and Windows 7. I used to use my webcam with no problems, however recently when I start my computer a message pops up saying that the camera has failed to start and to check my camera and restart. The Toshiba media sidebar also no longer pops up. I have tried dowloading the driver and restarting and this does not appear to have helped. Any ideas on what I can do to get it up and running again?

    marinesgirl,
    What model number is your computer? There should be a label on the bottom.
    In the Start Menu's search field, type "Device Manager" and press ENTER. Is "Imaging devices" listed? If you expand it, is your webcam listed?
    - Peter

  • Built-in iSight camera doesn't work all the time...?

    This started on iChat... When starting a video conference I see a black picture, the green light turns on but my buddy only see's a video of herself and is still able to hear me. I tried opening the audio/video preferences and the preview is still black. I also tried opening photobooth and it shows a black picture as well. This only happens on occassions, it works most of the time but this problem seems to be occurring more often. I've tried all the troubleshooting listed but nothing seems to work..?

    "I've tried all the troubleshooting listed but nothing seems to work..? "
    Please list them. This will avoid the +"been there, done that"+ scenarios when users try to provide you with troubleshooting solutions.
    Otherwise, +"since you've tried all the troubleshooting listed"+ then send your computer to your local AASP or contact AppleCare if you are still under warranty.
    Tried everything in Article http://support.apple.com/kb/HT2090 How to Troubleshoot iSight and this thread my isight camera is not working-not recognised with photo booth or ichat?

  • After "upgrading" from trial to FCPX 10.0.3 multi cam does not work

    After "upgrading" from trial to FCPX 10.0.3, multi cam does not work anymore. Everything was fine in the trial version, but now the multicam clip I made in trail is shown, but not with the 4 windows, only the first angle can be seen. And I can not find (import) the cuts I made in the trail. The settings are the same in both versions. Am I missing something? Is it possible that I have to start from scratch and all work is lost?
    When I double click the multi cam clip I see all four angles in the timeline, one underneath the other... 
    Any help is appreciated! Thanks!

    There is an excellent podcast tutorial series called "Creative COW Final Cut Help Tutorials Podcast (SD)"
    in the iTunes Store.
    The latest three are video podcasts and go into great depth concerning the new Multicam in 10.0.3
    Can't recommend them enough.

  • Both cameras on my iPod touch generation 4 will not work anymore. Is there a way I can send it back to get it fixed? Thank you ..

    Both cameras (front/back) will not work anymore. I would tap on the camera app, and the camera shutters would stay closed for a while and when it finally opens, it leaves a full blank screen. Is there a way I could send it in and get that repaired?

    GEESAR wrote:
    hi there
    is there anyway i can use the unlimited data i have from my mobile network provider (o2)  on this i pod touch 4 generation the latest model  NO.
    and does the sim from my mobile network o2 be used in the ipod touch4 to use the unlimited minuites i have from my mobile network provider  NO
    if not then how do i use the unlimited data ive been given through my mobile network provider please tell me most kindly  Purchase a mobile WiFi hotspot (Sometimes referred to as a MyFi), or have that service added to your cell phone.
       geeeeesar also how does this ipod touch4  pick up the  wifi free of charge is this possible or do you have to pay for limited data to access internet Your iPod can connect to any unsecured WiFi network that you are currently within range of.  These networks can be found at your local library, some city/county government buildings, doctor's offices, Denny's, IHOP, Starbuck's, Home Depot, Lowes, Best Buy, and other merchants.  Your iPod can connect to any secured WiFi network that you are within range of and that you have the password for. 
    thanks  can i pod touch 4 generation download movies too  please help thank u very much....  Yes.  If your iPod has a WiFi connection and you have an account with a service like NetFlix....

Maybe you are looking for