Isight camera not working with Mavericks OS?

Is anyone having this problem? On a 2008 Macbook, Mavericks seems to have effected the isight camera.

Chuckeebear wrote: Is anyone having this problem? ...
yes. iSight or other camera failure after OS X 10.9 Mavericks upgrade
Message was edited by: EZ Jim
Mac OSX 10.9.1

Similar Messages

Old macbook pro3,1 (2.4 GHz Intel Core Duo) camera not working with Mavericks

I have an old macbook pro3,1 (2.4 GHz Intel Core Duo, I think 2007), builtin camera not working and I think it is related to mavericks update.
Anyone had the same problem, and if yes what is the solusion?

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
     computer and after the chime press and hold down the OPTION key until the boot manager
     screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

Built in isight camera not working with flash

My built in isight camera on my macbook works just fine in photobooth and in skype or ichat.. but just in the past week or so, it will not work when im on websites that use flash. I've seen some threads that say that I need to go into settings and make sure that the camera chosen is the USB. When i go into flash settings, the only options are Google1, Google2, or Built in isight. It doesn't work with any of them. Does anyone have any idea how I can make it work again?

zeppelinfan1234 wrote:
I don't have google add ons. I followed the path but i have no Google folder in Application Support. Any other suggestions?
Your problem is not the same as that posted by the OP, and your system info shows you using Mac OS X (10.5.6).
For your symptoms with this system, I suggest you do the following:
(1) Apply the 10.5.8 Combo Update using the following process:
• Backup your Mac and turn off Time Machine
• Disconnect peripherals and restart Mac
• Use Disk Utility to repair permissions
• Download and install
http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
• Repair permissions again immediately following the restart that finishes the update.
• Test whether Flash works for you now.
(• Turn Time Machine on later when you are satisfied that the update worked.)
(2) After applying the 10.5.8 Combo, if you are still having problems, download and install the latest Flash player compatible with your system:
http://get.adobe.com/flashplayer/otherversions/
Also check any other third-party browser plugins or other add ons. Apply all available updates and uninstall any third-party items that are known to be incompatible with your system.
Message was edited by: EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.5); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.5)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod touch 4.1

External iSight cam not working with iChat

I've got an external iSight cam that was working fine in 10.5.8 with iChat - I'm using 10.6.1 now. Now when I open iChat, the camera stays off (no green light) and iChat video preview says that another application is using the camera so it's not available, which of course, is not true.
I've tried everything I know, but can't get it to work. The camera works with Skype, so I know it's functioning properly.
When I checked the Connection Doctor, under Network, it says that there's something in my network setup that is preventing video chats, but I haven't changed anything since upgrading to SL. I have a direct ethernet cable to my DSL modem/router - Covad. My wife's iChat works fine with her new LogiTech camera, and she's on the same home network/router.
Message was edited by: Macaroni108

Opps,
My head read that as MacBook Pro. Sorry.
Try Restarting the computer whilst Holding done the Apple (CMD)+ALT (OPTION)PR Keys until you have heard three start up Bongs.
Chax is an iChat Add-on.
Different version have done different things in the different iChat Versions.
There is only a Alpha test version of the one for Snow Leopard.
The iChat 4 version does not work in Snow Leopard/iChat 5 and that was why I was asking.
7:43 PM Monday; September 14, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

ISight Camera not working with Skype

Hi,
2 days ago my kids were skyping and everything was fine, then I turned off my iMac and the next day Skype wouldn't use my iSight Camera. In the settings it shows that it is using the iSight Camera but not picture! I made an update from skype but it didnt help. I restarted my computer, reinstalled skype nothing.
I am not a big pro with computers, so if you have an explanation, PLEASE be detailed in your explanation.
Thanks
Lucy

I know this is an older thread BUT I've been dealing with this issue for the past four days and this is what I found... (perhaps if it helps another person....)
Assuming you've already checked while on a Skype video call that your camera isn't turned off...
FIRSTLY
Open Skype Preferences to verify your settings.
(prob in your downloads, applications folder or on your desktop)
Then at the top your screen, next to the Apple Icon you should see Skype:
Select Skype, then scroll down to Preferences. Verify settings.
(Mine, for example, under the "Calls" Tab was set to autoanswer so I can check on
my dogs while away and tell them to get off the couch!)
SECONDLY
Make sure another apple app isn't hijacking your camera.
Open Finder, Devices, Applications, then look for IChat
Once open, Select iChat and scroll down to preferences.
(For my settings, I don't use IChat SO I changed the "default IM application" to Skype,
under General settings tab.)
Select the green Audio/Video Tab
and uncheck "Open IChat when external camera is on"
THIRDLY
I verified that all other Apps using the camera weren't open. My insight camera worked
when I opened Photobooth, IChat, Facetime and ICamSource (a monitoring program)
- just didn't work with Skype!
From Desktop, go to Apple Icon, select "Force Quit Finder", then scroll down and
close everything that uses the camera.
FINALLY
From Desktop, go to Apple Icon and select Restart (pic same as above).
Upon restarting, once the screen blanks out hold down the following keys all at once:
Option, Command and P and R keys.
For me, I heard the computer "restart song" chime twice before letting go.
(PRAM and NVRAM settings)
http://http://support.apple.com/kb/ht1379
I tried a Skype video call from an Iphone to Mac Desktop and it went through just fine!

Isight camera not working with skype on Win 7 Bootcamp

So I was happily running windows 7 (need it for work) on my MACBook (mid 2009) with Bootcamp 3.2 until a couple of weeks ago.
I updated something (either Skype or Bootcamp, etc) and all of a sudden, my iSight camera takes like 4-5 seconds to initialize, and the frame rates on the camera with Skype are like 1 new grab every 10-15 seconds.
Anyone run into this before?
Thanks,
Wes

I know this is an older thread BUT I've been dealing with this issue for the past four days and this is what I found... (perhaps if it helps another person....)
Assuming you've already checked while on a Skype video call that your camera isn't turned off...
FIRSTLY
Open Skype Preferences to verify your settings.
(prob in your downloads, applications folder or on your desktop)
Then at the top your screen, next to the Apple Icon you should see Skype:
Select Skype, then scroll down to Preferences. Verify settings.
(Mine, for example, under the "Calls" Tab was set to autoanswer so I can check on
my dogs while away and tell them to get off the couch!)
SECONDLY
Make sure another apple app isn't hijacking your camera.
Open Finder, Devices, Applications, then look for IChat
Once open, Select iChat and scroll down to preferences.
(For my settings, I don't use IChat SO I changed the "default IM application" to Skype,
under General settings tab.)
Select the green Audio/Video Tab
and uncheck "Open IChat when external camera is on"
THIRDLY
I verified that all other Apps using the camera weren't open. My insight camera worked
when I opened Photobooth, IChat, Facetime and ICamSource (a monitoring program)
- just didn't work with Skype!
From Desktop, go to Apple Icon, select "Force Quit Finder", then scroll down and
close everything that uses the camera.
FINALLY
From Desktop, go to Apple Icon and select Restart (pic same as above).
Upon restarting, once the screen blanks out hold down the following keys all at once:
Option, Command and P and R keys.
For me, I heard the computer "restart song" chime twice before letting go.
(PRAM and NVRAM settings)
http://http://support.apple.com/kb/ht1379
I tried a Skype video call from an Iphone to Mac Desktop and it went through just fine!

ISight camera not working with Myspace Karaoke

Hi guys! I searched the forum and couldn't seem to find anything on this...I'm trying to upload an audition for Glee on Myspace using my iSight camera. The audio seems to be recording fine, but when I try to play back what I've just recorded there is no video. I checked the settings and everything seems to be connected fine but it's still not working. Any idea why this is happening or what I can do to fix it? Thanks so much!

Hi,
A look here show me the Video shown is Flash based.
This would make me guess that the Record feature is also Flash based.
This should give you access to a Settings panel that you will have to tick the Allow Box and possibly select the camera from as well (icon to the lower right)
An Internal iSight is a USB camera.
7:50 PM Thursday; April 15, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

ISight camera not working with Adobe Flash player

my camera works fine with photobooth, etc but when i try to log onto sites that require flash to access my camera, the adobe flash setting window pops up requesting access to my camera. HOWEVER, no matter what i do i cant make any selections (such as allow/ deny) with my track pad or buttons.
i have macbookpro running snow leopard, the most up to date flash player, and the problem exists on both firefox and safari.
PLEASE HELP!

marymba wrote:
i have the exact same problem. however, i only ever use firefox and i'm a complete novice when it comes to computers. can you explain the solution step by step? literally, pretend you're talking to a five-year-old because that's basically my skill level.
Welcome to Discussions, marymba
For your skill level, re-read the User Guide manual that came with your Mac and then use your Mac's "Help" to searches for basic info about any words you do not understand from my suggestions.
If you need more help, spend some time studying subjects of interest from the link below:
Click link-> http://www.apple.com/support/mac101/ <-Click link
Mac 101 offers new users a great basic primer on using and troubleshooting your Mac.
If the above do not give you the level of detailed information you need, you need more training than I could write here. If you do not have a Mac friend who can help you, your nearest computer store can help you find low or no-cost help sources such as: a local Mac Users' Group, Adult Education courses, or perhaps even a computer club in your area. You can also find help in books or magazines dedicated to using Macs. Many are available from bookstores as well as from the on-line Apple Store at this link:
http://store.apple.com/us/browse/home/shopmac/macaccessories/books
If all else fails, contact your nearest Apple Store for info "onetoone" training described in this link:
http://www.apple.com/retail/onetoone/
For Apple Store locations, see: http://www.apple.com/retail/storelist/
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.3) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.3)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Why does my imac camera not work with maverick operating system

i updated my software to 10.9.2 yesterday and facetime and photobooth dont recognize my built in camera on my imac

Try these in order:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
     after the chime press and hold down the OPTION key until the boot manager screen appears.
     Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

Isight camera not working after the last update

After reboot of the last OS update
Isight camera not working...
i've tried photobooth, ichat, skype and it doesn't show up anywhere. in fact, when i go to system profiler, it doesn't show isight under USB connections at all.
just to give you a recap of what i've tried so far:
* restarting (obviously)
* resetting PRAM/SMC (by booting it the way it was specified in the isight troubleshooting thing)
* just shutting down my computer and taking the battery out for several hours
any Help pls
because i mast to use it as soon as possible in a conference

*A few suggestions.........*
Try running repair permissions from your HD and afterwards run +repair disk+ from your software install DVD.
my isight camera is not working-not recognized with photo booth or ichat
To fix your iSight, shut down computer. Reboot in safe mode (press power button and then hold shift key down). After computer boots, restart again. Hopefully, your iSight will start working again.

I bought Numbers because my Excel files would not work with Mavericks. How can I import a non-functioning Excel file into numbers? (As of now, the file NAME transfers but data is not.) but

I bought Numbers because my Excel files would not work with Mavericks. How can I import a non-functioning Excel file into numbers? (As of now, the file NAME transfers but data does not.)

HI Dave,
I'm surprised you get no message when you attempt opening the Excel document in Numbers.
I'm assuming Numbers 3.1, since you are running Mavericks.
Does the Numbers file that opens show any content?
Does it contain a table?
How large?
Does it contain more than one tab (indicating more than one sheet)?
Do those other tabs contain a table?
Have you checked those tables for data content?
There have been cases in the past of imported documents opening with white text on a white background, giving the appearance of containing nothing. Check for this by selecting a block of cells, then applying a Fill colour or a Text colour using the Format button (paintbrush).
I'd also suggest attempting to open the Excel files using LibreOffice, which can be downloaded from the linked website.
Regards,
Barry

I started to download Maverick but then read that Word and Excel do not work with Maverick. I hit pause on the download. How do I stop the download. In non technical terms please!

How do I stop the download of Maverick on my MacBookPro? I started downloading then discovered that 2008 Word and Excel do not work with Maverick. I have too many files in the 2008 version to upgrade them at this time. I just need instructions in non technical terms to stop the Maverick download.

I did the same as Tapmr and have paused the "upgrade". So am I to understand that the upgrade only downloads and will not automatically install it? I am an extreme novice here, and cannot afford any issues after I upgrade/download. I don't know how to make a clone copy as you suggested either.
I need assurance that if the upgrade is allowed to continue that I will be able to delete the upgrade downloaded and continue on as before with my regular system.

I want to install an old airport express, the ones which are directly plugged into the socket - but it does not work with Maverick or Snow Leopard - can I configure it with a windows pc?

I want to install an old airport express, the ones which are directly plugged into the socket - but it does not work with Maverick or Snow Leopard - can I configure it with a windows pc?

The Mac running Snow Leopard should be able to configure virtually any version of the AirPort Express.
Tell us what steps that you are taking to configure the Express and what happens after each step.

ISight is not working with boot camp

Hi,
I have a Macbook Pro and very satisfied with it. Formerly I worked with Windows XP, so I decided to buy a Macbook and use boot camp. Everything was fine. In my enthusiasm I bought the LED cinema display. Very good display but the iSight camera is not reliable working with boot camp. There is no driver available. Sometimes the camera is recognized as video device but mostly not. When the camera is not recognized then there is a yellow exclamation mark in the device manager. I don't know what to do. Is anybody working with boot camp and the iSight build in the LED cinema display? And what driver do you use? Hopefully I get some help here. Everything is working convenient except this issue.
Thank you, Frank

Sorry, I think I mixed some things. I tried several contellations to find out what is going wrong. The iSight is woking with my MacBook (and boot camp). But it is not working with other Laptops or PCs (all with Windows XP). It is working really rarely but not reliable and not replicatable. In all cases I tried only the USB connector from the LED cinema display. Audio, micro and hub is always working without problems. The iSight driver delivered with the Macbook is not working (only with the Macbook itself). If I had known this before I think I would buy the display although. The display is great. But it is a pity that the iSight is not working when you do not use Apple hardware. May be I will buy the Mac Pro in one or two years when I need a new PC. Perhaps someone can answer if Windows XP is working without problems on a Mac Pro? And is the iSight build in the LED cinema display working (Mac Pro and boot camp)?
Frank

External iSight Camera not working after update installed?

a couple of weeks ago I turned on iChat and up popped a window that said i needed to update the (external) iSight camera i had plugged into my minimac (firewire). followed the instructions and did just that. little greenlight glowed happily, rotated lens and opened iChat--little green light blinked off and then iChat showed that the camera was not turned on. tried turning it on and off by rotating the lens, unplugging firewire and also restarted computer...no change. looked for update to firmware and downloaded 1.0.3, only to be told it does not work with OS 10.4 (bummer).
had a back up camera, plugged that in and no problems...trouble is roomate recently got the pop-up screen when he was using it and, thinking he was doing me a favor, 'updated'...so now have 2 cameras that do not work and no answers to be found on the posts or the apple support site.
any ideas?

Welcome to Discussions, johnboysf
(1) Assuming you are not ANY having other problems with your Macs and that your Mac OS X Maintenance is up to date, you can concentrate on the iSight part of your system(s).
Restart your Mac with no unnecessary peripherals connected and try the suggestions here:
http://docs.info.apple.com/article.html?artnum=93240
(2) If your iSight still does not work with any app, check for Possible hardware or software conflicts with iSight.
(3) I cannot tell whether your mini is an iNtel or PPC. Apply the appropriate Combo Updater as follows if you still have the problem:
• Backup your Home Folder, or at very least, your important files.
• Repair permissions. (Click here if you need help.)
• For PPC, download and apply the Mac OS X 10.4.10 Combo Update (PPC).
• For iNtel, download and apply the Mac OS X 10.4.10 Combo Update v1.1 (Intel).
• Finish with another Permissions Repair, and then check your iSight again.
Users have reported fixes to a variety of audio, video, connectivity, and software conflicts and unreliability issues after properly applying Combo Updates.
(4) If your problem persists after trying all of the above, the problem may be with your iSight itself. The fact that you got that notification after you had previously been using your iSight successfully under OS 10.4.x, and the fact that the updater ran for you and your roommate under OS 10.4.x, makes me think there may be something wrong with your iSights. The Tiger (10.4.x) OS includes all the necessary earlier update (including iSight Firmware 1.0.3) and installs the Firmware update if necessary at the time you installed Tiger or first connected your iSight. Therefore, the Firmware update should be unnecessary and should not have been identified by Software Update... as being needed (unless someone has improperly thrown away some OS X files.)
As you note, iSight Firmware 1.0.3 will not run except on Mac OS X v10.3.7-10.3.9 (or, it now seems, if something is wrong.) If you have access to a Firewire-equipped Mac that is using one of these OSs, you can try applying the update to your iSights using that Mac.
(5) If you cannot find a Mac that is still using Panther, or if applying the update does not resolve your problem, contact your Apple Authorized Service Provider for professional service. Ask your AASP if he wants to see your Macs, too, to check whether their software has been modified or damaged.
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.10) G5 DP 1.8 w/Mac OS X (10.5) External iSight

Isight camera not working with Mavericks OS?

Similar Messages

Maybe you are looking for