Isight camera poor quality photos

I have an ipad3 which used to take great pictures.  Recently though, the iSight camera (that's the one facing OUT,  correct?) Has been taking photos that are too  bright, with uneven lighting and blurry pics.  I get this result wherever the photo is taken, the problem seems to be with the camera or lens?
FaceTime camera (the one facing the user)  photos look fine! 
I'd appreciate any suggestions as to  what might be the problem and solution.
Thanks

Hello there, Neil.
The following Knowledge Base article provides a practical checklist of steps to try for troubleshooting issues with undesired image quality:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
My issue is still not resolved. What do I do next?
Contact Apple Support.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Similar Messages

  • IPhone 5 flash on camera stopped working when taking photos & poor quality photos

    iPhone 5 camera flash  stopped  working when taking  photos and poor Quality photos . Flash still works when in torch mode .

    Hey there Jimbo,
    It sounds like your flash has stopped working on your phone and you noticed a decrease in image quality.
    I recommend a few troubleshooting steps here. Start with closing the running apps on the phone:
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    When you have done that restart the phone and test it again:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    If the issue persists, I would next backup your device to iTunes, and restore it:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • Poor quality Photo printing with the HP Officejet 6600

    Is anyone having a problem with the HP Officejet 6600 having very poor quality photo prints?

    Hi HereInJersey,
    Welcome to the HP Support forums.  I understand that printed photos from your  Officejet 6600 don't have the quality that you expect.
    I have included the "Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems" troubleshooting document.  It has detailed steps to take to improve the quality of your print jobs.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Why am i getting poor quality photo prints after installing lion using canon pixma 6120?

    After installing Lion, I began experiencing poor quality photo prints on my Canon Pixma 6120 printer.  Prior to Lion, my picture prints were all high quality.  Now, anything black in the picture is faded.

    Lion should not cause the blacks to print faded. The printer drivers used by Snow Leopard and Leopard are the same version as that used by Lion.
    For starters I suggest you check that you have the latest version installed. This Apple KB article shows the MG6100 series has v10.51.2.0 as the latest version.
    I also recommend you do a Nozzle test print. This can be executed from the MG6120 control panel or via the Printer Utilties window (via Print & Scan, select the printer and then open Options & Supplies and then select the Utilties tab).
    If the nozzle test print is okay but the blacks still look faded when printing photos (note the printer has two black ink tanks - one for photos and one for text) then try a reset of the printing system. This will remove the MG6120 from the Print & Scan pane but not the supporting drivers. So you will only have to add the printer again.

  • My new 4GS is taking really poor quality photos, how can I improve them?

    I'm trying out the camera on my new 4S and am shocked at the poor quality. I've taken the same photo in the same light etc with my 3GS and the image is much better, I can see more detail and the texture is smoother. My 4S images look terrible!
    Has anyone else noticed this? Is there a way to alter the settings? Thanks in advance.

    Hi there, i am an iphoneographer from OZ, and i am having the same issue, i have switched from iphone 4 which was upgraded to IOS5 to the 4s with the IOS 5. Since owning the 4s i have had nothing but noisey pictures in low lighting conditions, including cloudy days night time occasions indoors ect, even when using flash.
    I have used different apps, including the standard apple cam, king camera, Pro cam, Focus Plus, and the quality is all the same with the noise, but yet when i take the same pictures with the iphone 4 (which my other half has now) in the same lighting they are fantastic quality. I'm not clear here what the issue is as being an iphoneographer/Photgrapher i though i knew a fair bit about the iphone but this has really stumped me and left me no choice to send out a call for help and ask if other people out there are in the same boat, and have any advice on what possibilities could help fix this, as i miss the quailty on my iphone and dont want to have to swap back to it. Cheers LJ

  • Poor quality photo printing

    I am getting very poor quality prints from my new Canon MG6220. I have it set on the advanced photo with glossy paper. Am I missing something? 

    Are you using Canon brand paper? Unless you have the proper profile for other papers you'll get less than ideal prints. The printer (when working correctly) will spray the correct amount of ink onto the paper, but it's matched to Canon paper. IF you use any other brand it may absorb more ink or less than the printer is set to spray. That has a major effect on the look of the photo.
    Also note that most people edit using their monitor set at full brightness, but when they print it's not the same. It's very important to set your monitor's brightness to match what your printer produces.
    "A skill is developed through constant practice with a passion to improve, not bought."

  • Poor quality photos and type

    I am doing 2 projects, first one is a video of a trip I took, where I have added type, imported in some special pieces I created in After Effects etc. After running if off and importing it into dvdstudio pro it looks great. The problem is with project #2, my photo montage. In FCP I brought high quality photos in and added type to the photos (just as I added type in my video project), but after running if off the exact same way as the video (basic export, self contained movie, current settings) and bring it in to dvdstudio pro, the quality is horrible. Type is pixilated, photos are a bit pixilated too. What am I doing wrong? It's not a monitor thing, I have burned a dvd and viewed it on tv and it was just as bad.
    Thanks for any help you can give me,
    Michelle

    Its not possible yet to figure out whether your problem is with FCP or with DVDSP (or both).
    You need to hook up a TV to view the work in progress. Run firewire out from the computer to your camera then cables from your camera to the TV. Your camera manual will show you how to connect it to your TV if you are unfamilier with the process.
    Once the TV monitor is connected, watch the sequence.
    Does it demonstrate problems?
    If so, lets fix them here.
    If not, the issues are being introduced in the mpeg2 encoding.
    What settings are you using?
    x

  • Officejet Pro 8600 Plus produces very poor quality photos

    I have a new  HP Pro 8600 Plus that has disappointed me in the quality of photo prints.  I have always had very good results from my prior HP printers, the last one being the 6500 and was expecting similar quality with this one.  I am using HP Premium Plus paper (glossy) and the ink that came with my printer (which I purchased at Costco).  The photos are lacking in sharpness and look like very cheap copies.  Am I expecting too much from this model?

    I've had the same experience, it doesn't print glossy. I'm using the same HP photo paper. I believe it's the type of ink they're using on the 8600. They say it doesn't dry up as easily, so maybe this is the down side. However, it would be nice if they wouldn't advertise, ".. prints impressive business photos." I bought this printer to replace an HP Photosmart c4180, that prints impressive photos, but the ink drys up because I use it so sporadically. I guess I'm going to have to replace the color cartridge (since it dried up again with plenty of ink in it) and remember to print color copies at least once a week. Otherwise, the 8600 seems awesome so far.

  • Poor quality photos

    Pics are terrible in low light conditions

    Yep. Cause the iPad's camera is mediocre at best. It was meant to be used for facetime and is pretty much useless for photos.

  • Poor quality photos after rendering in Premiere Elements 10 timeline

    I've imported my photos from Photoshop Elem. 10, at 720x480 res., 72 ppi, jpeg files. and the photo quality is blurred and pixelated and rendering the timeline doesn't seem to help.  I checked the flicker removal box...I'm not sure that helped much either.  I did a number of these photo videos in an old Premiere application and never ever had this problem, so I'm not sure what's going on. The photo in the preview looks just fine.   I'm doing this video for my daughter's wedding, so want it to be of the best quality.   Can anyone give me any hints.    

    This is rather a PS, on display of DVD-Video on HD TV's. Just did a SlideShow of ~  4000 x 3000 pxls. Still Images, Scaled to 720 x 480 in PS w/ Bicubic Sharper. It was output to a DVD-Video. When I tested it on my laptop with an HD display, the Images looked just OK - DVD resolution w/ no up-rezzing chip involved. However, when I played that same disc on my Panasonic BD player (w/ up-rezzing chip) on a 42" LED TV, things looked great. Only little problem was that in one Image, I got a bit of "glimmer" in some roof tiles - that Image had been slightly over-Sharpened. My bad. As the glimmer was only in one Image, and its Duration was 05 sec., I let it go, as I doubt that anyone else will even see it, when fed to two very large Diamondtron screens in a semi-dark event hall.
    The gist of that is that when played on the multi-drive onto my laptop's 17" HD screen, w/ no up-rezzing chip, the Images were just OK - nothing special, and I knew those Images intimately. However, w/ up-rezzing chip in the BD player, and displayed on a much larger screen, the overall quality improved greatly.
    Good luck,
    Hunt

  • MacBook Pro (Late 2007, 2.4/2.2GHz) - Built-in isight camera issue

    I have a MBP (as mentioned, Late 2007) running Lion 10.7.2 (updated yesterday). And I have a problem with the built-in iSight camera
    Same with photo booth and skype.
    So far I have tried
    1) shutdown, unplug power, remove battery, press power for 5 seconds, plug battery back, plug power, boot. No help. No LED's light up to make my day.
    2) Press P R - Alt Cmd during boot (2/3 cycles like that)
    Could anyone throw some light into this?
    Much thanks in advance.

    Try reinstalling Lion:
    Reinstalling Lion
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Continue button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

  • Mid 2009 13" MBP iSight camera bad picture quality in photo booth

    My daughter's stock mid 2009 13" MBP 2.26 ghz intel core two duo has a problem with the isight camera. The isight camera is built in to the screen. The isight camera works some of the time flawlessly and other times it comes out real grainy and with small colored pixels all over the screen like colored static (about 20% to 30% of the photo booth screen is affected but the rest of the screen outside of the photo booth app is unaffected). She only uses it in photo booth but we've tried the iChat app and the same thing happens there too, once she couldn't get the MBP to connect to the isight camera (it just showed a black photo booth screen), so she closed the lid of her MBP and reopened it and it worked. All of the software and firmware is up to date and we've tried resetting the PRAM and the SMC, it didn't do anything to fix the problem. It seems like there's a wire loose in the computer from the screen to the computer base, only because I can move the screen back and forth and the picture quality changes, the amount of static on the picture will move, go away or get worse. I had the screen changed in early 2010 (January or February) (the MBP was about 5 or 6 months old then) at the apple store under warranty due to dirt under the screen's glass (manufacturing defect). The photo booth picture static problem comes and goes, but here lately it comes more than it goes. The screen in general is in good shape and doesn't have any detectable problems with it, it has a good picture and no dead pixels, the problem seems to be only isolated to the isight camera. Can some one help with this problem? How long of a warranty is given on the warranty repairs (like the screen change they did in early 2010)? If apple does a repair on it and finds a wire that has rubbed the insulation off of it on a hinge causing a short and the isight problem, as a result of a sloppy repair from the first warranty repair, will they cover it under warranty again even if it's been over a year since they changed the screen? Also how honest will apple be if they do find out it is a problem caused from the first screen replacement, will they own up to their mistake? If I don't agree with apple's repair decision, can I get a second opinion from an outside source, third party, and if it's diagnosis different than apple's and can be proven, can I still get apple to do and pay for the repairs and labor if it turns out to be their fault from the first warranty screen replacement?
    The reason why I'm asking is, I took my wife's white macbook in about a year ago for the famous cracked top cover replacement (under warranty) and when I got the computer back, the isight camera didn't work, so I gave it back, they took it apart a look at it and said there was nothing wrong with it and gave it back, then the screen wouldn't come on so after 4 hours at the Apple store they decided to send it to Austin, TX. for repairs (I'm in Ft. Worth TX.). Apple in Austin said it needed a new main board. They said the old one had water damage to it. We never had water anywhere near the computer, not even in the same room. It was working fine when we took it in, we took it in just to get the plastic top case, that cracks all of the time, replaced under warranty. And then they wanted us to pay for an $800 main board because some how while they were doing the top cover replacement it got water damaged. I argued with them and they finally gave me a one-time offer of them paying for half of the repair and labor or if I disagreed or left the store I would have to pay the whole amount if I chose to have the repairs done. So I ended up having to pay $467 for a year old macbook main board that was water damaged in their possession during their repairs. I like Apple and their products but I am worried about giving my daughter's MBP over to them for repairs because of this incident, it's an honesty issue with how honest they will be with what they find because they won't give back the old parts for analysis by a third party to verify their diagnosis.
    Thanks for any info and advice anyone can give.

    Hi,
    As a personal note I find long posts like this hard to read if they are not broken up in to paragraphs.
    As I say it is  a personal thing.
    I can give you some information about the camera and laptops over the past few years.
    Basically in early Laptops of the MacBook Pro and MacBook range the cable did tend to fray at the point where it passed through the hinge.  It did take a well used laptop that had the lid open and closed frequently to cause this.  (your 2009 model might just be in that group - I have no firm dates or models I am afraid)
    Later models have this rerouted so that this does not happen.
    However the cable has then tended to get pulled from the camera end and become loose.
    This On Line Self fix site has pages about some models  (The one I have linked to may not be yours)
    I have linked in to later pictures in the sequence but there are navigation points to work back to the start.
    Note:- they use pretty specifc specialest tools as well in these pics.
    Doing this would certail Void any Warranty you have left.
    From Posts mainly in the iChat and the iSight areas I have gathered that it seems common for Apple to replace the Screen as a whole rather than fiddle with getting solely at the camera.
    Apple has this article on Trouble Shooting an iSight
    Basically it says try several apps then try logging in on another Mac User account to see if it is App based or User based or in fact System wide.
    If System wide then resetting the SMC/PMU is the only suggested fix.  (Which I did read you had done)
    In addition to that I would add that testing should be done in different lighting conditions.
    Lighting in the evening or dark that is good enough to read buy is not always good enough for the camera or is not illuminating the right areas.
    Some people have reported that Starting the computer in Safe Mode (then Rebooting afterwards) seems to help.  (it clears out some caches and starts up with reduced extensions)
    As to actual Repairs and any Warranty that may still be in place I cannot say.
    I can say that when people post about problems with repairs a certain stores someone else will tend to post that their experience was different.
    You seem to report two different experiences with the two computers yourself.
    10:24 PM      Thursday; July 14, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.7),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Z1 Compact camera : poor photo quality

    Hi
    I got some issue with the quality ofr the photo. After I upgrade new version of my phone, I start to notice that all the photos that were taken after the update are in very poor quality. I wonder how can I fix it ?

    You could repair your phone with PCC
    PC Companion (PCC)
    http://support.sonymobile.com/us/tools/pc-companion/
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Poor quality image with doing videos with photos/images HELP!

    Hello,
    I bought Adobe Premiere Element to make videos with pictures. When I do the video, the quality of my photos is good. When I save the video on my computer or I download it on youtube (example) the quality of my photos is extremely poor. Why? Does anyone can help me? Thank you!

    What Project Preset did you choose at New Project? In the case of Video, composed of Still Images ONLY, you would set that to your desired delivery specs. Not so, if you are also using Video.  I tried several types of parameters. Some parameters give poor quality when I upload it to Youtube (for example) and others in the design of video and upload to YouTube. So which settings should I use for photos only ?
    This sounds like you are talking about the Export/Share settings for output to YouTube.
    What I was asking is what did you start off with, when you were at New Project?
    If you are doing an SD Project, you will have either 720 x 480 (NTSC), or 720 x 576 (PAL) pixels in the Project's Frame Size. If that is what you want, then I would Scale your camera original Stills to 640 x 480 (for NTSC), as you have Square Pixels, and the Project will have either 0.9 for NTSC Standard, or 1.21 for NTSC Widescreen).
    PrE can Scale the Still Images, but the Scaling algorithms in Photoshop are much better, and offer more control.
    Now, if you wish to do an HD Project, just choose that as your Preset, and then use the Images in about their original size. Note, there will be some black borders, as the screen-caps most likely have a different Aspect Ratio, than a Video Project, which for HD will be 16:9. Especially with screen-caps, that are pretty low resolution to begin with, I would NOT do any Scaling, and would live with the letterboxing, or pillar boxing, rather than Scale and effectively Crop.
    Also, when Scaling in Photoshop, I do not Save_As JPEG, as it introduces compression, but only as either PSD (Photoshop's native format), or PNG.
    Good luck,
    Hunt

  • In Mac OS X Lion, why are iSight Camera's lower quality than they where in Snow Leopard?

    Ever since I have gotten Mac OS X Lion on my MacBook Pro, MacBook, and same occurance with a friends MacBook Pro (all running iSight Cameras not the new FaceTime Cameras that are built into Mac's now) The quality of the iSight camera has decressed significantly in Photobooth, FaceTime, iChat video calls, and etc. What is the reason behind this?

    I'm having the same issue. I switched from Snow Leopard to Lion last week and noticed a decrease in quality of photos that the iSight takes. It is really noticable! Why would they bog down the resolution on the webcam? It makes no sense to me. I wanted to be sure it wasn't just my imagination and went to Photo Booth, took a new photo and compared it directly to one taken on Snow Leopard, and the new one looked horrible! I hope they will fix this soon!

Maybe you are looking for