Isight camera self-activates?

my isight camera light flashes on for a second when i'm not using it.
i've checked photobooth and imovie, but they're not running.
my girlfriend's does this too (on 1st gen MB).
any thoughts on what's happening?

"yes also - i do have iAlertU_0.29b and LockdownV1.0.6 installed."
Well this is the cause of your issue. You will need to read iAlertU instruction manual and/or contact their tech support to confirm if if the iSight cam is suppose to self-activate when you are using the computer.
As for your girlfriend, is she there in the same house w/you when it happens to her or someplace else?
Has she tried all the suggestions mentioned in this thread?
It's possible she also has an anti-device installed that you don't know about!
Your girlfriend can take the computer to an Apple Store for them to check it out if the issue persists.

Similar Messages

  • How do I activate my Isight camera to take an image of my gift card?

    How do I activate my Isight Camera to take an image of my Gift card so I can redeem it?
    The camera sees the card OK, but I don't know how to make it take an image.
    Please help.
    Greg.

    I don't think that you can do it with older MacBook's which have iSight cameras on them, the redeem by camera lists requirements as :
    Mac with a FaceTime camera (an Apple Display with FaceTime works too)
    I think that you will need to manually enter the card's code

  • Kisight: How do I get my iSight working ?  Trouble Shooting an iSight Camera.  (Version 3)

    Replacement for the second draft of this Thread   (To be removed if Published as Tip)
    kisight: How do I get my iSight working ?
    Trouble Shooting an iSight Camera.  (Version 3)
    Hi,     On many subjects Apple has Articles and Documents that can help.
    In some case they are written by an Engineer or similar and can miss the mark for the average user.
    In other cases they are crafted, detailed responses to an issue that has popped up many times in the Apple Discussions and take the best from many responses in those User-to-User Discussions, creating something that can not be surpassed.
    This is the case of the Apple Article HT2090 on Trouble Shooting an iSight.
    It lists steps and processes to go through for both Internal iSights and External ones.
    However as with most things it does sometime pay to reword things differently so that people grasp the points in language they understand.
    The info here is a reworking itself of two pages at ralphjohns.co.uk/EZ Jim pages namely EZ JIm's page 2 Where can I Find Help With My iSight ? and his page 4, How Can I Test My iSight is Completely Functional ?  which were written several years ago and predate the Apple Article, being aimed at the External iSight.  They have been updated since to address the Internal iSight as well but some of the comments are useful between the two types.
    External First.  For Internal iSights Start at 2b)  (you will need to adjust some options/steps as the Internal is USB)
    Steps
    1) Pre Purchase
    If buying an External iSight you should if you an get to see it in action.Apple no longer sells the External iSight so you will be buying it second hand.If you cannot get to see the device plugged in and working on  Mac then check the smaller print of the seller and selling site as to nature of Returns and Faulty Goods.
    2) Does it work ?
    a) First of all Plug it in.  It should come with a suitable mount (although there are variants on this) and a 6 pin to 6 pin Firewire cable.
    Ideally it should have it's own Firewire port/socket on your computer. Connecting it "DaisyChained" to other devices can be a problem as they do not all use Firewire at the same Data speed.
    It will then go through some checks as the OS powers it up and checks it's firmware.
    Do not be concerned that the little green indicator light atop your iSight illuminates for a few seconds and then goes dark when you first connect your iSight or power on your Mac. Do not be concerned if you hear a soft whir as iSight attempt to focus either. Both these occurrences are normal. If your iSight passes the following tests, do not worry about this sound or the status of the green light.
    There is no ON switch as such.  It does have an iris mechanism that can be controlled by the User.  The iris should be turned so you can see the Lens for the iSight to send pictures to an application.
    b) Pick an Application to see the picture the iSight produces.iChat is one application you can use. Photobooth is another. iMovie (Version 4 or above for external iSight -- Version 6 or above for in-built iSight) and Comic Book (if bundled on your Mac) are yet more.
    See this Users Tip for more applications Or this page for yet more.
    Photo Booth is probably the simplest as it has no Preferences to choose a camera in the original version and is done from the Menu items in later versions  (nor is there any setting in the OS) and Photo Booth will default to the External Camera if one is plugged in before the application is started.     If you see your self or what the camera is pointing at, It Works !!
    3) If it does Not Work
    a) Check Cables/leads.  Re-seat the cable at both ends. DO this carefully as although Firewire cables are keyed to fit the right way it has been known to force them the wrong way.
    Try another 6 pin to 6 pin firewire cable.
    b) Unplug the cable from any other FireWire device and give the iSight it's Own FireWire port/socket on the Mac (exclude issues with other FireWire devices). It is important that this be a port/socket on your computer and that you know that it works. Do not use a port in a FireWire hub or another FireWire device or a FireWire port in an Apple Display for testing.  (Also see d below if you have an 800 FIreWIre Computer)
    c) Check System Profiler (Apple Icon menu top Left > About this Mac. > More Info Button)Open the Reveal Triangles to see the list and go to Hardware > FireWire.  (Use USB for Internal Cameras)
    If it appears here try booting or Logging in as another user on the Mac (Create a Test account if you don't have one) and try item 2b) above again.
    d) With FireWire 800 computers you may have to change your FireWire 400 to 800 Adaptor or Cable to get full Audio functionality with Lion Apps
    If it is not in the System Profiler you are almost certainly going to need the Trouble Shooting Article from Apple at this point.  This Article may also be of help (number HT1317 What to do if your computer won't recognise a FireWire or USB device).
    If you have not resolved things at this stage it is going to be time for an Engineer with Apple credentials.There are no user serviceable parts inside any iSight.
    Other Items
    Audio.
    The External Camera has two mics inside.The volume it records at or plays through for iChat is controlled in System Preferences > Sound > Input tab (select device) and this should be set to get the blue response bar to at least half way (preferably three quarters) when you talk.The same applies to any other Mic, even the Internal one on laptops and some other Macs.
    Firmware.
    The System Profiler as detailed above should tell you the Firmware the iSight has.  The current version is 1.0.3 and was updated in Panther.  (Essentially it is an Audio compatibility update but does seem to help in other situations)
    If your computer is running Panther (10.2.x) then use this Updater
    If running Tiger (10.4.x) or Leopard (10.5.x) then navigate manually to your Hard Drive/System/Library/Core Services/iSight Updater and run the updater found there.
    If an iSight is Plugged in on the Computer when you do an  OS update and the firmware needs updating on the iSight this app is supposed to be triggered but it seem it may need a hand at times.
    Focusing on the External iSight
    Essentially the External iSight is self or Autofocusing.
    If in doubt then try better lighting and strong colours as opposes to light or pastels.
    (All built-in iSights are fixed focus. Therefore, unless a built-in iSight lens cover is dirty or smudged, any built-in iSight whose image is blurry needs service by an Engineer with Apple credentials.)
    EZ Jim has these more specific recommendations for piece of mind.
      Make a cross whose lines are about one-half inch or more wide on a plain background to use as a focus target. (I have even used black electrical tape.)
    Turn on plenty of light and hold the target very still at about two or three feet from the lens. Watch iSight focus. (You may need to use a tripod or brace yourself to hold the target still enough.)
    Then quickly move the target and hold it very still at about one foot away from the lens. Watch iSight focus.
      Finally, move in to about six inches from iSight, and check focus there, too. (Holding the target still is more important as you get closer to iSight.)
    This Users Tip by Ian Bickerstaff  can give you clues for any application really  "Look  and sound good in iChat"
    Other Info and Links
    iSight Support info at Apple Links to Users Guide, Manual and many other topics on the External iSight.
    Apple's iSight Firewire Connectivity FAQs
    Apple's iSight Service FAQs
    If you feel you have not understood or think you have not grasped something here or in the links so far try the iSight Discussion Forum
    1:13 PM      Saturday; October 8, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

    Replacement for the second draft of this Thread   (To be removed if Published as Tip)
    kisight: How do I get my iSight working ?
    Trouble Shooting an iSight Camera.  (Version 3)
    Hi,     On many subjects Apple has Articles and Documents that can help.
    In some case they are written by an Engineer or similar and can miss the mark for the average user.
    In other cases they are crafted, detailed responses to an issue that has popped up many times in the Apple Discussions and take the best from many responses in those User-to-User Discussions, creating something that can not be surpassed.
    This is the case of the Apple Article HT2090 on Trouble Shooting an iSight.
    It lists steps and processes to go through for both Internal iSights and External ones.
    However as with most things it does sometime pay to reword things differently so that people grasp the points in language they understand.
    The info here is a reworking itself of two pages at ralphjohns.co.uk/EZ Jim pages namely EZ JIm's page 2 Where can I Find Help With My iSight ? and his page 4, How Can I Test My iSight is Completely Functional ?  which were written several years ago and predate the Apple Article, being aimed at the External iSight.  They have been updated since to address the Internal iSight as well but some of the comments are useful between the two types.
    External First.  For Internal iSights Start at 2b)  (you will need to adjust some options/steps as the Internal is USB)
    Steps
    1) Pre Purchase
    If buying an External iSight you should if you an get to see it in action.Apple no longer sells the External iSight so you will be buying it second hand.If you cannot get to see the device plugged in and working on  Mac then check the smaller print of the seller and selling site as to nature of Returns and Faulty Goods.
    2) Does it work ?
    a) First of all Plug it in.  It should come with a suitable mount (although there are variants on this) and a 6 pin to 6 pin Firewire cable.
    Ideally it should have it's own Firewire port/socket on your computer. Connecting it "DaisyChained" to other devices can be a problem as they do not all use Firewire at the same Data speed.
    It will then go through some checks as the OS powers it up and checks it's firmware.
    Do not be concerned that the little green indicator light atop your iSight illuminates for a few seconds and then goes dark when you first connect your iSight or power on your Mac. Do not be concerned if you hear a soft whir as iSight attempt to focus either. Both these occurrences are normal. If your iSight passes the following tests, do not worry about this sound or the status of the green light.
    There is no ON switch as such.  It does have an iris mechanism that can be controlled by the User.  The iris should be turned so you can see the Lens for the iSight to send pictures to an application.
    b) Pick an Application to see the picture the iSight produces.iChat is one application you can use. Photobooth is another. iMovie (Version 4 or above for external iSight -- Version 6 or above for in-built iSight) and Comic Book (if bundled on your Mac) are yet more.
    See this Users Tip for more applications Or this page for yet more.
    Photo Booth is probably the simplest as it has no Preferences to choose a camera in the original version and is done from the Menu items in later versions  (nor is there any setting in the OS) and Photo Booth will default to the External Camera if one is plugged in before the application is started.     If you see your self or what the camera is pointing at, It Works !!
    3) If it does Not Work
    a) Check Cables/leads.  Re-seat the cable at both ends. DO this carefully as although Firewire cables are keyed to fit the right way it has been known to force them the wrong way.
    Try another 6 pin to 6 pin firewire cable.
    b) Unplug the cable from any other FireWire device and give the iSight it's Own FireWire port/socket on the Mac (exclude issues with other FireWire devices). It is important that this be a port/socket on your computer and that you know that it works. Do not use a port in a FireWire hub or another FireWire device or a FireWire port in an Apple Display for testing.  (Also see d below if you have an 800 FIreWIre Computer)
    c) Check System Profiler (Apple Icon menu top Left > About this Mac. > More Info Button)Open the Reveal Triangles to see the list and go to Hardware > FireWire.  (Use USB for Internal Cameras)
    If it appears here try booting or Logging in as another user on the Mac (Create a Test account if you don't have one) and try item 2b) above again.
    d) With FireWire 800 computers you may have to change your FireWire 400 to 800 Adaptor or Cable to get full Audio functionality with Lion Apps
    If it is not in the System Profiler you are almost certainly going to need the Trouble Shooting Article from Apple at this point.  This Article may also be of help (number HT1317 What to do if your computer won't recognise a FireWire or USB device).
    If you have not resolved things at this stage it is going to be time for an Engineer with Apple credentials.There are no user serviceable parts inside any iSight.
    Other Items
    Audio.
    The External Camera has two mics inside.The volume it records at or plays through for iChat is controlled in System Preferences > Sound > Input tab (select device) and this should be set to get the blue response bar to at least half way (preferably three quarters) when you talk.The same applies to any other Mic, even the Internal one on laptops and some other Macs.
    Firmware.
    The System Profiler as detailed above should tell you the Firmware the iSight has.  The current version is 1.0.3 and was updated in Panther.  (Essentially it is an Audio compatibility update but does seem to help in other situations)
    If your computer is running Panther (10.2.x) then use this Updater
    If running Tiger (10.4.x) or Leopard (10.5.x) then navigate manually to your Hard Drive/System/Library/Core Services/iSight Updater and run the updater found there.
    If an iSight is Plugged in on the Computer when you do an  OS update and the firmware needs updating on the iSight this app is supposed to be triggered but it seem it may need a hand at times.
    Focusing on the External iSight
    Essentially the External iSight is self or Autofocusing.
    If in doubt then try better lighting and strong colours as opposes to light or pastels.
    (All built-in iSights are fixed focus. Therefore, unless a built-in iSight lens cover is dirty or smudged, any built-in iSight whose image is blurry needs service by an Engineer with Apple credentials.)
    EZ Jim has these more specific recommendations for piece of mind.
      Make a cross whose lines are about one-half inch or more wide on a plain background to use as a focus target. (I have even used black electrical tape.)
    Turn on plenty of light and hold the target very still at about two or three feet from the lens. Watch iSight focus. (You may need to use a tripod or brace yourself to hold the target still enough.)
    Then quickly move the target and hold it very still at about one foot away from the lens. Watch iSight focus.
      Finally, move in to about six inches from iSight, and check focus there, too. (Holding the target still is more important as you get closer to iSight.)
    This Users Tip by Ian Bickerstaff  can give you clues for any application really  "Look  and sound good in iChat"
    Other Info and Links
    iSight Support info at Apple Links to Users Guide, Manual and many other topics on the External iSight.
    Apple's iSight Firewire Connectivity FAQs
    Apple's iSight Service FAQs
    If you feel you have not understood or think you have not grasped something here or in the links so far try the iSight Discussion Forum
    1:13 PM      Saturday; October 8, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Mid 2009 13" MBP iSight camera bad picture quality in photo booth

    My daughter's stock mid 2009 13" MBP 2.26 ghz intel core two duo has a problem with the isight camera. The isight camera is built in to the screen. The isight camera works some of the time flawlessly and other times it comes out real grainy and with small colored pixels all over the screen like colored static (about 20% to 30% of the photo booth screen is affected but the rest of the screen outside of the photo booth app is unaffected). She only uses it in photo booth but we've tried the iChat app and the same thing happens there too, once she couldn't get the MBP to connect to the isight camera (it just showed a black photo booth screen), so she closed the lid of her MBP and reopened it and it worked. All of the software and firmware is up to date and we've tried resetting the PRAM and the SMC, it didn't do anything to fix the problem. It seems like there's a wire loose in the computer from the screen to the computer base, only because I can move the screen back and forth and the picture quality changes, the amount of static on the picture will move, go away or get worse. I had the screen changed in early 2010 (January or February) (the MBP was about 5 or 6 months old then) at the apple store under warranty due to dirt under the screen's glass (manufacturing defect). The photo booth picture static problem comes and goes, but here lately it comes more than it goes. The screen in general is in good shape and doesn't have any detectable problems with it, it has a good picture and no dead pixels, the problem seems to be only isolated to the isight camera. Can some one help with this problem? How long of a warranty is given on the warranty repairs (like the screen change they did in early 2010)? If apple does a repair on it and finds a wire that has rubbed the insulation off of it on a hinge causing a short and the isight problem, as a result of a sloppy repair from the first warranty repair, will they cover it under warranty again even if it's been over a year since they changed the screen? Also how honest will apple be if they do find out it is a problem caused from the first screen replacement, will they own up to their mistake? If I don't agree with apple's repair decision, can I get a second opinion from an outside source, third party, and if it's diagnosis different than apple's and can be proven, can I still get apple to do and pay for the repairs and labor if it turns out to be their fault from the first warranty screen replacement?
    The reason why I'm asking is, I took my wife's white macbook in about a year ago for the famous cracked top cover replacement (under warranty) and when I got the computer back, the isight camera didn't work, so I gave it back, they took it apart a look at it and said there was nothing wrong with it and gave it back, then the screen wouldn't come on so after 4 hours at the Apple store they decided to send it to Austin, TX. for repairs (I'm in Ft. Worth TX.). Apple in Austin said it needed a new main board. They said the old one had water damage to it. We never had water anywhere near the computer, not even in the same room. It was working fine when we took it in, we took it in just to get the plastic top case, that cracks all of the time, replaced under warranty. And then they wanted us to pay for an $800 main board because some how while they were doing the top cover replacement it got water damaged. I argued with them and they finally gave me a one-time offer of them paying for half of the repair and labor or if I disagreed or left the store I would have to pay the whole amount if I chose to have the repairs done. So I ended up having to pay $467 for a year old macbook main board that was water damaged in their possession during their repairs. I like Apple and their products but I am worried about giving my daughter's MBP over to them for repairs because of this incident, it's an honesty issue with how honest they will be with what they find because they won't give back the old parts for analysis by a third party to verify their diagnosis.
    Thanks for any info and advice anyone can give.

    Hi,
    As a personal note I find long posts like this hard to read if they are not broken up in to paragraphs.
    As I say it is  a personal thing.
    I can give you some information about the camera and laptops over the past few years.
    Basically in early Laptops of the MacBook Pro and MacBook range the cable did tend to fray at the point where it passed through the hinge.  It did take a well used laptop that had the lid open and closed frequently to cause this.  (your 2009 model might just be in that group - I have no firm dates or models I am afraid)
    Later models have this rerouted so that this does not happen.
    However the cable has then tended to get pulled from the camera end and become loose.
    This On Line Self fix site has pages about some models  (The one I have linked to may not be yours)
    I have linked in to later pictures in the sequence but there are navigation points to work back to the start.
    Note:- they use pretty specifc specialest tools as well in these pics.
    Doing this would certail Void any Warranty you have left.
    From Posts mainly in the iChat and the iSight areas I have gathered that it seems common for Apple to replace the Screen as a whole rather than fiddle with getting solely at the camera.
    Apple has this article on Trouble Shooting an iSight
    Basically it says try several apps then try logging in on another Mac User account to see if it is App based or User based or in fact System wide.
    If System wide then resetting the SMC/PMU is the only suggested fix.  (Which I did read you had done)
    In addition to that I would add that testing should be done in different lighting conditions.
    Lighting in the evening or dark that is good enough to read buy is not always good enough for the camera or is not illuminating the right areas.
    Some people have reported that Starting the computer in Safe Mode (then Rebooting afterwards) seems to help.  (it clears out some caches and starts up with reduced extensions)
    As to actual Repairs and any Warranty that may still be in place I cannot say.
    I can say that when people post about problems with repairs a certain stores someone else will tend to post that their experience was different.
    You seem to report two different experiences with the two computers yourself.
    10:24 PM      Thursday; July 14, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.7),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • ISight Camera not working after Leopard install

    On my 1st gen Intel 20" iMac, after the Leopard upgrade -- which went very smoothly -- my iSight camera no longer works. I have tried it in Photo Booth and iChat Video and it is the same in each, so it is the camera, apparently, not the application using it.
    In the self-viewing screen on my iMac, I see myself for just a second or so, then I fade out quickly and there is nothing to see but black. If I shine a desk lamp in my face, then I can just barely see the outline of my image but the picture is mostly black. It seems like an exposure problem: the camera seems to adjust, shutting down as though I am very brightly lit but since I am not, it produces only a black picture.
    I also have a 1st gen Intel white MacBook that I have also upgraded to Leopard. The iSight camera seems to work just fine on that computer. I tried out the video in Photo Booth and it worked great.
    Any ideas?

    Hi,
    I too am having the same problem, and I'm using the old school iSight camera and immediately after installing Leopard, it won't work. I can't even power up the camera. It will power up for about 3 seconds then power down as fast as the little green light came on. It was fine about an hour before the 10.5 install. I powered down and unplugged everything for about 10 mins. then plugged it all back in, and still not working. So I am back to the drawing board trying to sort this out. If anyone has anymore thoughts on this, pls. chime in. All the suggestions seem to work for you folks after a little tweak. I even booted into OF mode and reset-nvram and reset-all for kicks to give it an even fresher start.
    thanks!

  • IMovie 8.0.6 doesn't recognize my iSight camera.

    I have a Mid 2010 MacBook Pro running OS X 10.9.5;
    iMovie 8.0.6 doesn't recognize my iSight camera.  The iSight camera works on Skype, Photo Booth and FaceTime.  I hadn't used iMovie in almost a year, however, the last time it recognized the iSight camera without a problem.
    Does anyone have any ideas on how to fix this?
    Thanks!

    rudsmac4me,
    The article linked below details a potential solution that may help get iMovie to recognize your iSight camera.
    In iMovie 7.1.2 or later, you may not be able to use your built-in iSight camera to capture footage in iMovie. iMovie may not recognize the camera. This may occur even if you are able to activate the camera in other applications, such as iChat.
    iMovie '08: Built-in iSight camera not recognized
    http://support.apple.com/en-us/TS2472
    Cheers,
    Allen

  • Built in iSight Camera dark

    My built in iSight camera stays dark even though every light in the room is on.Is there anything I can do to fix this?

    Hi, you can d/load iGlasses
    it just needs iGlasses. Apply easy preset settings and fun effects to your ... iGlasses also activates video conferencing on G3 computers which fall below ...
    www.ecamm.com/mac/iglasses/
    The iSight is not a high quality digital camera, it is mainly for iChat etc..L

  • Want to use Logitech, not iSight camera, but can't.

    I want to make a simple video with my iMac, using a new Logitech USB camera, instead of the iSight camera inside of the monitor frame. The computer recognizes the Logitech camera just fine, and other applications (e.g. iChat) have no problem using the Logitech camera. I just can't figure out how to get the iMovie program to use it instead of the iSight camera. The Logitech camera also works perfectly with other Macs in the house. I can click the little "camcorder" icon in iMovie, and a window opens, showing the video feed from the iSight camera. There is a little drop-down box in that window that SHOULD allow me to choose another camera, but there is nothing but the iSight camera available for selection.
    The Logitech camera is plugged directly into the back of the iMac, so there should be no power problems. Also, it is fully recognized in the "about this Mac menu, when I click 'USB').
    I know that this is probably a stupid little thing, but I've tried and tried and can't figure out how to use the Logitech camera.
    Thanks to all who would reply.

    USING AN IPHONE AS AN IPOD
    Restore your phone as new.  Place a SIM card into the phone and connect it your computer with iTunes open and follow the activation assistant to activate the iphone.  Once the iphone have been activated remove the SIM card and turn on imessage in settings/messages.  Only your Apple ID should appear in the “You can be reached by imessage at” and “Start new conversation from” fields.  Read the following article for help http://support.apple.com/kb/HT3406

  • IMovie '08: Built-in iSight camera not recognized in Yosemite

    On this page
    http://support.apple.com/en-us/TS2472
    iMovie '08: Built-in iSight camera not recognized
    it says:
    In Finder, navigate to /System/Library/LaunchDaemons/
    Select the file com.apple.mio.VDCAssistant.plist and delete.
    Restart your system.
    You should now be able to use your iSight camera with iMovie.
    However, in Yosemite, it only has this file name
    com.apple.cmio.VDCAssistant.plist
    and I don't want to delete it as instructed without someone who knows telling me it won't hurt my newly installed and thus far working well OS 10.10.1, with iMovie 7.1.4 on my iMac 24 inch, Early 2008, 2.8 GHz Intel Dore 2 Duo, 2 GB 800 MHz DDR2  SDRAM.  It worked with Leopard, and I don't recall having to use the above mentioned support page.

    Contact Apple. I believe you have a hardware issue there if it's not showing up in your System profiler.
    Dave M.
    MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
    Macsimum News Associate Editor  Creator of 'Mac611 - Mobile Mac Support'

  • Can't capture video using iSight camera in QuickTime 7.4 (92)

    OK, I see that there are plenty of "bugs" with Quicktime Version 7.4 (92), but I don't see the problem I am having, posted anywhere. Here goes...
    I cannot capture video using my [Firewire] iSight camera on my CoreDuo MacMini. I definitely used to be able to do this. When I go to File>New Movie Recording, I get a back/blank Movie Recording window and that's it. I click on the Red/Record button and nothing happens. The timer doesn't even advance. Just sits there. When I try to stop the recording, I get the following message:
    *"Recording failed because no data was received.*
    *Make sure that the media input source is turned on and playing."*
    I can still capture audio, although had some problems and had to "downgrade" to version 7.3.x and subsequently reinstalled 7.4. Now the audio works but still no video.
    A few things:
    1. YES, the iSight camera works - I can use it in iMovie, iChat, Photobooth, etc. - for both video and audio.
    2. As I mentioned, I tried "downgrading" (using "Pacifist") but still no video.
    3. I re-installed Version 7.4 and the audio problems cleared up, but again, still unable to capture video.
    3. All software updates installed.
    Any ideas???
    Thanks!

    "As I mentioned, I tried "downgrading" (using "Pacifist") but still no video."
    See QuickTimeKirk’s posting in the following thread:
    http://discussions.apple.com/thread.jspa?threadID=1357579&tstart=0
    Try the following:
    Trash com.apple.LaunchServices.plist
    It's located in your account:
    HD/Library/Preferences/com.apple.LaunchServices.plist
    Delete the file, restart (a new .plist will be created) and quicktime hopefully will work again w/o doing an Archive & Install.
    +If you want to do an A&I:+
    Do an archive and install of your OS from the OS disc. Stop at the QT upgrade you need.
    http://docs.info.apple.com/article.html?artnum=301270 Scroll down to "Archive and Install”
    IMPORTANT: Maker sure you select "preserve user preferences and data" when you performed the A&I?
    Good luck!

  • How do I attach my iSight camera to my Apple Cinema Display?

    I've just bought two iSight cameras, and found nothing in the accessory kit with them that would allow me to attach the camera to my Apple Cinema Display. This is because the back of the Cinema Display is beveled rather than flat, so the flat base of the accessories won't set firmly.
    Does anybody have a solution for this?

    Robert,
    Isn't it it nice to have your issues solved.!!
    I was wondering if you would help us out, & mark you posts so that this message on top of your threads are gone:
    "This question is "Helpful" answers available: 2. "Solved" answers available: 1"
    Thought this might be appropriate reading, regarding those Helping You to Solve Your issues.
    Answers, Helpful and Solved
    Marking simply as Answered does not award points.
    You are the Original poster and only you can do this.
    Thanks, for your Time and effort !!
    Eme

  • How do I use my isight camera live?

    I have a 27 inch Imac. How do I use my Isight camera as a web cam? I have flashplayer 10, but it still won't work. Help?

    Software always operates webcams, so you need to find software applications that does what you want.
    Use your Mac's  > App Store... menu command to search for "webcam"
    (without quotation marks).
    You can also search for other terms like "video chat",  "video conferencing",  "video surveillance", etc.
    If you need other functions, some of the older apps in the list in this link are also still available:
      http://www.ralphjohns.co.uk/EZJim/EZJimpage7.html
    BTW, Flash 10 is out of date for OS X 10.7.2.
      • You can find the latest Flash version that works with you system using this page:
          http://www.adobe.com/software/flash/about/
    If you update, use your Mac's Disk Utility to repair permissions.  Then follow Adobe's instructions here: http://kb2.adobe.com/cps/908/cpsid_90893.html
    Be sure to uninstall your current Flash player before installing the new one.
    Repair permissions again immediately following installation of the updated Flash player.
      • Be aware that the current Flash Player Preferences can  be configured in your Lion Mac's  > System Preferences...    These settings may be blocking Flash on a system-wide basis.
      •  Individual Flash settings are still configured in the same way as older versions:
          http://tinyurl.com/5kjv3
    Message was edited by: EZ Jim

  • HT3964 my built-in isight camera will still not work on my macbook pro after completing smc reset.  The green light comes on but no video.

    my built-in isight camera will still not work on my macbook pro after completing smc reset.  The green light comes on but no video. 
    Any Suggestions?

    Restart the computer.

  • IMovie 6.0.3 does not recognize built in iSight Camera on new iMac

    New iMac, Intel, OS 10.5.4, QT 7.5.
    Built in Camera works with Photo Booth, the new iMovie 7.1.3 and iChat.
    iMovie HD 6.0.3 or 6.0.4 does not recognize the camera. Opening a new project results in a No Camera Connected error. I have tried selecting various options in the video format drop down when creating a new project. I have repaired permissions, tried it under various users, removed the imovie plist, reinstalled imovie (both 6.0.3 and 6.0.4) without success. All 10 of the new computers are exhibiting this problem.
    Any help would be appreciated.

    That is not an option that I can select on the imac's. On my iBook under 10.5.4 with iMovie HD 6.0.3 or 6.0.4 I can click on the triangle next to the camera icon and select the built in iSight camera. On the new iMacs that does not work. The built in iSight is not listed as an option.

  • Battery wont charge and isight camera wont turn on-macbook, battery wont charge and isight camera wont turn on-macbook

    i bought a macbook from a guy and when i started it up... surprise it wont turn on if its not connected because the battery is not being detected.... then what i checked first was photobooth surprise the isight camera is not working... i searched in internet about smc but i do not understand it.... is there a way to recover it using the cd?

    Try resetting the PMU - Resetting MacBook and MacBook Pro System Management Controller (SMC). If you have no success then you'll need to take it in for service or replace the AC adaptor if it's gone bad.

Maybe you are looking for