ISight camera stopped working!

Okay, I've had my iSight for a few months now, and never really had a problem with the iSight itself. I just plugged it in to use and it doesn't work. My iChat doesn't show that I have connected a camera, and when I go in preferences to video, it doesn't show any picture at all. What happened? I've plugged and unplugged it a few times to make sure the connections were good. What should I do?

Hello Steve,
You can check your iSight using the tests and trouble shooting suggestions in the How To Ensure Your iSight Is Functional FAQ.
If your iSight fails ALL tests see your Apple VAR or Service Technician to have it checked. It may be damaged. If you do not have local access to qualified Apple Service Technicians, see the iSight Service info links in the Where to Find Help for iSight? FAQ,

Similar Messages

  • ISight camera stopped working for non-Apple software after last OSX update

    I did the last OSX update last night and my iSight camera stopped appearing for Skype, Yahoo Messenger, and Zoom.us
    The camera is accessible to FaceTime and PhotoBooth
    I did a restore from time machine and the camera worked (the restore took 3 hours)
    Then I applied the update again and the camera disappeared
    Anyone else experience this?
    Thanks

    You're most welcome.
    If you get tired of waiting, the fix has worked for some. 
    Here is an example: http://discussions.apple.com/message/22984254#22984254
    Message was edited by: EZ Jim
    Mac OSX 10.8.5

  • My isight camera stops working just after i updated to mountain lion 10.8.1 on my macbook air 2012. any suggestions!

    No camera related applications are working, such as facetime, phone booth and skype..

    Upgraded to 10.8.2. Lost my isight cam. Anyone got a resolution?

  • Every time i plug in a USB mouse, the isight camera stops working

    The problem is that whenever i plug in a USB mouse to say, game, the Isight camera is disabled and is "being used by another applcation" and this problem continues until i log off and back on or i restart. I am running a apple magic mouse for other uses and is normally still connected when this happens, but i tried disabling it first and plugging in the mouse and same issue happens again. any help?

    I also figured out that if i plug in some combination of things, such as the mouse and an ipod, the camera comes back. any ideas?

  • Isight problem stopped working

    Macbook Pro from 2008
    the iSight camera stopped working suddenly.
    any tips?

    Apple's http://support.apple.com/kb/HT2090

  • I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine

    I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine

    Hi there Fgonzalez2015,
    You may find the camera troubleshooting steps in the article below helpful.
    Get help with the camera on your iPhone, iPad, or iPod touch
    You see a closed lens or black screen
    If you see a closed lens or black screen when you open the Camera app, try these steps:
    Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
    Force the app to close, then open the Camera app again.
    Restart your device, then open the Camera app again.
    If your device has a front and rear camera, try both cameras by tapping the camera swap icon . If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
    -Griff W.  

  • I have hp laptop dv9009us one day all the USB ports and webcam camera stopped working

    I have hp laptop dv9009us one day all the USB ports and webcam camera stopped working, I had windows XP and tried all solutions posted on online forums didn’t work, I upgraded to windows 7 and still not working, please note that the USB is detected in device manger and it says working properly but he webcam is not detected at all, also when I connect any device to USB it gives it power and I even can charge my cell phone but it doesn’t detect any device. Is there any genius out there that can help me?
    Also after I installed windows 7 I went o system information----software environment--- system drivers, and I found all USB drivers stopped by the way this was the case in windows XP as well
    usbccgp            Microsoft USB Generic Parent Driver   c:\windows\system32\drivers\usbccgp.sys         Kernel Driver   No            Manual Stopped           OK      Normal No       No
    usbcir   eHome Infrared Receiver (USBCIR)    c:\windows\system32\drivers\usbcir.sys Kernel Driver   No       Manual            Stopped           OK      Normal No       No
    usbehci Microsoft USB 2.0 Enhanced Host Controller Miniport Driver  c:\windows\system32\drivers\usbehci.sys            Kernel Driver   No       Manual Stopped           OK      Normal No       No
    usbfilter            AMD USB Filter Driver           c:\windows\system32\drivers\usbfilter.sys          Kernel Driver   No            Manual Stopped           OK      Normal No       No
    usbfltr   Razer Copperhead Driver         c:\windows\system32\drivers\copperhd.sys       Kernel Driver   No       Manual            Stopped           OK      Ignore  No       No
    usbhub Microsoft USB Standard Hub Driver    c:\windows\system32\drivers\usbhub.sys           Kernel Driver   No            Manual Stopped           OK      Normal No       No
    usbohci Microsoft USB Open Host Controller Miniport Driver  c:\windows\system32\drivers\usbohci.sys          Kernel Driver   No       Manual Stopped           OK      Normal No       No
    usbprint            Microsoft USB PRINTER Class           c:\windows\system32\drivers\usbprint.sys          Kernel Driver   No            Manual Stopped           OK      Normal No       No
    usbstor USB Mass Storage Driver        c:\windows\system32\drivers\usbstor.sys           Kernel Driver   No       Manual            Stopped           OK      Normal No       No
    usbuhci Microsoft USB Universal Host Controller Miniport Driver         c:\windows\system32\drivers\usbuhci.sys            Kernel Driver   No       Manual Stopped           OK      Normal No       No
    uwbusb            UWB Bus Control USB-Miniport Driver          c:\windows\system32\drivers\usbuwbmini.sys    Kernel Driver   No       Manual Stopped           OK      Normal No       No

    Did you ever get this resolved? I am having the same problem and have tried just about everything for my dv9000.

  • Isight camera not working after the last update

    After reboot of the last OS update
    Isight camera not working...
    i've tried photobooth, ichat, skype and it doesn't show up anywhere. in fact, when i go to system profiler, it doesn't show isight under USB connections at all.
    just to give you a recap of what i've tried so far:
    * restarting (obviously)
    * resetting PRAM/SMC (by booting it the way it was specified in the isight troubleshooting thing)
    * just shutting down my computer and taking the battery out for several hours
    any Help pls
    because i mast to use it as soon as possible in a conference

    *A few suggestions.........*
    Try running repair permissions from your HD and afterwards run +repair disk+ from your software install DVD.
    my isight camera is not working-not recognized with photo booth or ichat
    To fix your iSight, shut down computer. Reboot in safe mode (press power button and then hold shift key down). After computer boots, restart again. Hopefully, your iSight will start working again.

  • My camera stopped working, I get a blank screen. Does anyone know how to fix this?

    My ipad3 is a couple of months old and the camera stopped working. When I select the camera app I get a blank screen. I can't do anything but close the app. Has anyone else experienced this? How can I correct?
    Thanks,
    Jojora

    When you say that you can close it are you closing the app this way?
    Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button when you are done.

  • Yesterday I was able to take photos but around 9pm last night my rear camera stop working. I have reseted my phone and have also restored it and the camera still is not working. Also I have deleted all apps that can have access to the camera.

    Yesterday I was able to take photos but around 9pm last night my rear camera stop working. I have reseted my phone and have also restored it and the camera still is not working. Also I have deleted all apps that can have access to the camera and i have updated the new IOS.What else should I do ? Is this a hardware problem?

    Looks like a hardware issue that will have to be taken to a store

  • How to I get the built-in iSight camera to work?

    My built-in iSight camera is working but the "capture" button is greyed out and I can't record.

    Hi there,
    You may want to take a look at some for the troubleshooting steps found in the article below, specifically the section titled "Built-in iSight cameras"
    How to Troubleshoot iSight
    http://support.apple.com/kb/ht2090
    Hope that helps,
    Griff W.

  • Camera stopped working

    i just got my new 6350 in april. in may it was dropped in water the phone works fine, but my camera stopped working. when i push the camera button or manually go into my stuff and go to camera it just goes to a black sceen then to a blue one and says camera on standby. it won't record video either, but i can still record voice on it. anything i can do to fix it??? i know stop dropping phones in water!!!!! thanks

    "anything i can do to fix it??? i know stop dropping phones in water!!!!! thanks"
    buy a new one and stop dropping phones in water
    If you want to thank someone, just click on the blue star at the bottom of their post

  • Photo Booth Camera stopped working

    When I installed the OS from the installs CD and launched the computer the photobooth built in camera turned on. As soon as I installed the files from choosing software update the camera stopped working. Is anyone else having this problem? If so how do I fix it?
    Seems like a driver or software conflict.
    Help????

    Found out that the problem occurrs when I hook my Canopus ADVC Analog to Digital box. For some reason it turns off my built in photobooth camera.

  • ISight suddenly stopped working

    My iSight suddenly stopped working in the middle of a Skype connection. It had been working correctly: my contact heard me and saw my image. Then, the sound suddenly was lost, and after that the image. The green light on the iSight went off. If I plug the firewire cable into another port, the light comes on for a few seconds, then goes off. The iSight is identified in About This Mac. I took the iSight to the local Genius Bar, and it worked perfectly on 2 other Mac's. I was advised to re-install the OS with archive, but isn't there anything more simple?

    Hello George,
    ... isn't there anything more simple?
    Here are some things you can try.
    (1) If you used your own iSight's cable when you tested your iSight at the Genius Bar, you know neither the cable nor your iSight is the problem.
    You can test your iSight with other applications to determine whether you have problems with more than one. Also, consider the link there to Apple's "iSight: How to Troubleshoot" suggestions.
    (2) If your only problem is with Skype, consider reinstalling Skype or check out Skype's great Help section. Skype even hosts its own discussion forums dedicated to Skype specific issues.
    (3) If your iSight has problems with more than one application, consider whether your Mac OS X Maintenance is up to date. Maintenance is the first thing I check when I begin to experience minor problems or system slowdown.
    (4) If your problem persists although your OS X Maintenance is current, download and apply this Mac OS X 10.4.8 Combo Update (PPC). Finish with another Permissions Repair and check your iSight again.
    Users have reported fixes to a variety of audio, video, connectivity, and software conflicts and unreliability issues after properly applying Combo Updates.
    The Combo Updater will be much simpler than an A&I reinstall.
    Jim
      Mac OS X (10.4.8)    G5 DP 1.8  External iSight

  • Camera stopped working in all applications on my new MacBook Air 10.8.5 Any help?

    My mid 2013 new MacBook Air camera stopped working in all applications, facetime, photobooth and skype. It says camera not found. Does anyone have a solution for this problem? Thanks!

    I have figured it out! You just have to install the new plug in to your macbook.
    Download  the AppleCamera.plugin provided.
    Click on go in the finder menu, select go to golder and paste in /Library/CoreMediaIO/Plug-Ins/DAL/ ,
    move that item, AppleCamera.plugin, to the trash
    Go to your downloads folder and copy the new AppleCamera.plugin, then paste it in the folder where the old one was.
    It works

Maybe you are looking for

  • Multiple data loads in PSA with write optimized DSO objects

    Dear all, Could someone tell me how to deal with this situation? We are using write optimized DSO objects in our staging area. These DSO are filled with full loads from a BOB SAP environment. The content of these DSO u2013objects are deleted before l

  • LSMW /RFBIBL00 CO-PA trouble

    Hello All, I try to load P&L account into FI-GL using LSMW and RFBIBL00. For some accounts, I have to load CO-PA charcteristics values. I did it into the mapping and relation structure, but the system doesn't write it. When I do the transaction FB01,

  • Error in Binding_Error

    Hi Experts, I am trying to get an IDoc from R/3 to the XI adapter.  I use transaction WE19 to start processing to the XI adapter and the RFC fails.  When I look in transaction SM58 I see Error in Binding_Error in the Status Text for the call.  I can

  • Polish language

    I have been asked to translate some existing patient information leaflets into Polish. I have the text (as a PDF) but when I cut and paste into InDesign3, I lose all the accented letters. I only have English and USA under languages. I use Windows XP.

  • Latest ZEN 7 Version for NW6.5?

    Hi, i'm a bit lost about latest Version Numbering of Zen7 for NW6.5 Servers, because i have some Issues about imaging and i'm not sure about my current Version. Is Imaging Server Version V.7.0.1 the latest one? Or what is the current "Update/Servicep