Isight In Macbook Dead???

The isight camera in my macbook all of sudden is no longer being recognized by the system. Is there anything i can do?
Thanks

i've been frustrated with this problem for months now. unfortunately my warranty expired a while back and taking my macbook to an Apple store is not an option for me due to location.
i carry my macbook with me as i use it for work and for about two months after i bought it, i was pleased to say i had no qualms with the way it worked. that changed soon after. when i went to open photobooth i received a message that said:
"...there is no camera attached or the camera is in use by another application."
diagnostics proved that my beloved macbook was no longer recognizing my built in isight as hardware on my computer. my "ichat" said that there was no camera attached. this news seemed strange as i had changed NOTHING on my computer that would have resulted in this. i began a proactive search looking for any store that could provide me with this part or any hardware fix that could prove useful in fixing my isight but i received no answer. there is no green light. there is no recognition of a connection. my isight seems to be...DEAD! recently i found a blog site that provide an answer. it said to update my EFI 1.0 and SMC 1.1 firmware. i did, but that again did nothing for my camera issue.
i can't send my computer in, i have no way of getting to an Apple store, and there doesn't seem to be a place where i can buy a replacement isight for my macbook (that's not to say it would even work if i replaced it).
my question to you all is what do i do? i am in a dark place right now, no green light, no green screen, just black...what do i do? any ideas would be well appreciated. thanks.

Similar Messages

External iSight on MacBook Pro - but not in iChat!

Hello all,
I'm considering the purchase of an iSight camera on ebay to use on my MacBook pro.
Does the Mac fully recognize the camera across all applications? For example, Yahoo Messenger, Skype, QuickTime Pro, etc., etc., etc.
Does it recognize it along with the built in one for everything? Is there a way to set it in the preferences as the default in case a given application only recognizes a default camera rather than giving me an option?
Cheers,
Aaron
Winnipeg, Manitoba, Canada

Welcome to Apple Discussions, Aaron
I'm considering the purchase of an iSight camera on ebay to use on my MacBook pro.
Even if the iSight you are buying through an internet auction site is a NOS (new, old stock) iSight, it may not be covered by Apple Warranty. If the seller is not providing you service guarantees or warranty, you may be interested in considering Apple's iSight Service: Frequently Asked Questions.
Moreover, if the one you buy is used, you may also want to be certain whether the connectors, cables, and mounts that meet your needs are included.
Does the Mac fully recognize the camera across all applications?
It does for Skype and the apps (caveats as listed) in this list of Some Applications You Can Use With iSight. The only way to really know whether an app will work with iSight is to check the System Requirements for each application you contemplate using with a webcam.
Does it recognize it along with the built in one for everything? Is there a way to set it in the preferences as the default in case a given application only recognizes a default camera rather than giving me an option?
Some applications allow you to switch between multiple cameras when you have more than one connected. Such apps would let you select between your built-in iSight and an external. iMovie and iChat AV are two that do this. See the documentation for other apps to determine whether they have the ability to select between multiple connected cameras.
I know of no way (or need) to set the preferences for a default camera. Applications that will not allow switching between multiple cameras will recognize only the one their software expects. Apps that do allow switching will let you choose which you want.
EZ Jim
PowerBook 1.67 GHz Mac OS X (10.4.10) G5 DP 1.8 External iSight

How do I transfer files from PowerBook to MacBook. (dead screen PB)

Problem is, the PowerBook 1400C has a dead screen. So I can
boot it up, but that's it. Is there a way to hook up the MacBook
to the PB so the PB is seen as an external hard drive? There
are no firewire or usb ports on the PB 1400. Just want to get
some documents off of it.

I think you'll have to take the hard drive out and install it in an external enclosure.
Target disk mode won't work on Macs that are old enough to lack a native firewire port. And if the screen is dead, I don't see how you could connect via ethernet and enable file sharing.
Edit: From googling, I see that a video out port was optional on (some?) PB 1400's. If you have one, can you get it to boot with a monitor? Then file sharing would be an option.

[FIXED] iSight on Macbook 2,1 - Firmware not loading

Running the default kernel, yet lsusb gives
Bus 001 Device 003: ID 05ac:8300 Apple, Inc. Built-in iSight (no firmware loaded)
and I have no /dev/video0. According to the Macbook ArchWiki page, I shouldn't need isight-firmware-tools. Here's my startup log from dmesg (relevant stuff appears to show up at about 4.38 seconds):
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.8-1-ARCH (tobias@testing-i686) (gcc version 4.8.2 20140206 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Apr 1 12:27:17 CEST 2014
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000be0f7fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000be0f8000-0x00000000be2f8fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000be2f9000-0x00000000bee4afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bee4b000-0x00000000bee70fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bee71000-0x00000000bee7ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bee80000-0x00000000beeaafff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000beeab000-0x00000000beeb6fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000beeb7000-0x00000000beebbfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000beebc000-0x00000000beebdfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000beebe000-0x00000000beeeefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000beeef000-0x00000000beefefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000beeff000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f00f8000-0x00000000f00f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffb0000-0x00000000fffdffff] reserved
[ 0.000000] e820: update [mem 0xbaacb010-0xbaadb03b] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000000090000-0x000000000009ffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000bffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000baacb00f] usable
[ 0.000000] reserve setup_data: [mem 0x00000000baacb010-0x00000000baadb03b] usable
[ 0.000000] reserve setup_data: [mem 0x00000000baadb03c-0x00000000be0f7fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000be0f8000-0x00000000be2f8fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000be2f9000-0x00000000bee4afff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000bee4b000-0x00000000bee70fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000bee71000-0x00000000bee7ffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000bee80000-0x00000000beeaafff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000beeab000-0x00000000beeb6fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000beeb7000-0x00000000beebbfff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000beebc000-0x00000000beebdfff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000beebe000-0x00000000beeeefff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000beeef000-0x00000000beefefff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000beeff000-0x00000000bfffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f00f8000-0x00000000f00f8fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fffb0000-0x00000000fffdffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] efi: EFI v1.10 by Apple
[ 0.000000] efi: ACPI=0xbeefd000 ACPI 2.0=0xbeefd014 SMBIOS=0xbeebf000
[ 0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000001000-0x0000000000007000) (0MB)
[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000007000-0x000000000008f000) (0MB)
[ 0.000000] efi: mem03: type=10, attr=0xf, range=[0x000000000008f000-0x0000000000090000) (0MB)
[ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000090000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem05: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem06: type=2, attr=0xf, range=[0x0000000001000000-0x00000000018cc000) (8MB)
[ 0.000000] efi: mem07: type=7, attr=0xf, range=[0x00000000018cc000-0x000000007ef96000) (2006MB)
[ 0.000000] efi: mem08: type=2, attr=0xf, range=[0x000000007ef96000-0x0000000080000000) (16MB)
[ 0.000000] efi: mem09: type=7, attr=0xf, range=[0x0000000080000000-0x00000000ba030000) (928MB)
[ 0.000000] efi: mem10: type=4, attr=0xf, range=[0x00000000ba030000-0x00000000ba078000) (0MB)
[ 0.000000] efi: mem11: type=7, attr=0xf, range=[0x00000000ba078000-0x00000000baaca000) (10MB)
[ 0.000000] efi: mem12: type=2, attr=0xf, range=[0x00000000baaca000-0x00000000baadd000) (0MB)
[ 0.000000] efi: mem13: type=1, attr=0xf, range=[0x00000000baadd000-0x00000000bae9e000) (3MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x00000000bae9e000-0x00000000bcec6000) (32MB)
[ 0.000000] efi: mem15: type=4, attr=0xf, range=[0x00000000bcec6000-0x00000000bced1000) (0MB)
[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x00000000bced1000-0x00000000bcee8000) (0MB)
[ 0.000000] efi: mem17: type=4, attr=0xf, range=[0x00000000bcee8000-0x00000000bcf12000) (0MB)
[ 0.000000] efi: mem18: type=7, attr=0xf, range=[0x00000000bcf12000-0x00000000bcf17000) (0MB)
[ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x00000000bcf17000-0x00000000bcf27000) (0MB)
[ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x00000000bcf27000-0x00000000bcf2b000) (0MB)
[ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x00000000bcf2b000-0x00000000bdc19000) (12MB)
[ 0.000000] efi: mem22: type=7, attr=0xf, range=[0x00000000bdc19000-0x00000000bdc1c000) (0MB)
[ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x00000000bdc1c000-0x00000000bdc51000) (0MB)
[ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x00000000bdc51000-0x00000000bdc52000) (0MB)
[ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x00000000bdc52000-0x00000000bdd11000) (0MB)
[ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x00000000bdd11000-0x00000000bdd13000) (0MB)
[ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x00000000bdd13000-0x00000000be0f8000) (3MB)
[ 0.000000] efi: mem28: type=10, attr=0xf, range=[0x00000000be0f8000-0x00000000be2f9000) (2MB)
[ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x00000000be2f9000-0x00000000becf8000) (9MB)
[ 0.000000] efi: mem30: type=7, attr=0xf, range=[0x00000000becf8000-0x00000000bed3a000) (0MB)
[ 0.000000] efi: mem31: type=3, attr=0xf, range=[0x00000000bed3a000-0x00000000bee42000) (1MB)
[ 0.000000] efi: mem32: type=7, attr=0xf, range=[0x00000000bee42000-0x00000000bee4b000) (0MB)
[ 0.000000] efi: mem33: type=5, attr=0x800000000000000f, range=[0x00000000bee4b000-0x00000000bee71000) (0MB)
[ 0.000000] efi: mem34: type=7, attr=0xf, range=[0x00000000bee71000-0x00000000bee80000) (0MB)
[ 0.000000] efi: mem35: type=6, attr=0x800000000000000f, range=[0x00000000bee80000-0x00000000beeab000) (0MB)
[ 0.000000] efi: mem36: type=7, attr=0xf, range=[0x00000000beeab000-0x00000000beeb7000) (0MB)
[ 0.000000] efi: mem37: type=9, attr=0xf, range=[0x00000000beeb7000-0x00000000beebc000) (0MB)
[ 0.000000] efi: mem38: type=7, attr=0xf, range=[0x00000000beebc000-0x00000000beebe000) (0MB)
[ 0.000000] efi: mem39: type=10, attr=0xf, range=[0x00000000beebe000-0x00000000beeef000) (0MB)
[ 0.000000] efi: mem40: type=9, attr=0xf, range=[0x00000000beeef000-0x00000000beeff000) (0MB)
[ 0.000000] efi: mem41: type=6, attr=0x800000000000000f, range=[0x00000000beeff000-0x00000000bef00000) (0MB)
[ 0.000000] efi: mem42: type=0, attr=0x8000000000000000, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[ 0.000000] efi: mem43: type=0, attr=0x8000000000000000, range=[0x00000000bef00000-0x00000000c0000000) (17MB)
[ 0.000000] efi: mem44: type=11, attr=0x8000000000000000, range=[0x00000000f00f8000-0x00000000f00f9000) (0MB)
[ 0.000000] efi: mem45: type=11, attr=0x8000000000000000, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem46: type=11, attr=0x8000000000000000, range=[0x00000000fffb0000-0x00000000fffe0000) (0MB)
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Apple Inc. MacBook2,1/Mac-F4208CAA, BIOS MB21.88Z.00A5.B07.0706270922 06/27/07
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0xbeebe max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BF000000 mask FFF000000 uncachable
[ 0.000000] 4 base 000000000 mask F80000000 write-back
[ 0.000000] 5 base 080000000 mask FC0000000 write-back
[ 0.000000] 6 base 0BEF00000 mask FFFF00000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
[ 0.000000] [mem 0x37000000-0x373fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
[ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] BRK [0x018ae000, 0x018aefff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x7ef96000-0x7fffffff]
[ 0.000000] Allocated new RAMDISK: [mem 0x36794000-0x377fdfb9]
[ 0.000000] Move RAMDISK from [mem 0x7ef96000-0x7fffffb9] to [mem 0x36794000-0x377fdfb9]
[ 0.000000] ACPI: RSDP beefd014 000024 (v02 APPLE )
[ 0.000000] ACPI: XSDT beefd1c0 00006C (v01 APPLE Apple00 000000A5 01000013)
[ 0.000000] ACPI: FACP beefb000 0000F4 (v03 APPLE Apple00 000000A5 Loki 0000005F)
[ 0.000000] ACPI: DSDT beef0000 0041E4 (v01 APPLE MacBook 00020001 INTL 20050309)
[ 0.000000] ACPI: FACS beec0000 000040
[ 0.000000] ACPI: HPET beefa000 000038 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: APIC beef9000 000068 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: MCFG beef8000 00003C (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ASF! beef7000 0000A0 (v32 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SBST beef6000 000030 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ECDT beef5000 000053 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SSDT beeb9000 0001DA (v01 APPLE SataAhci 00001000 INTL 20050309)
[ 0.000000] ACPI: SSDT beeef000 0004DC (v01 APPLE CpuPm 00003000 INTL 20050309)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2166MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x018af000, 0x018affff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0xbeebdfff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0008efff]
[ 0.000000] node 0: [mem 0x00090000-0x0009ffff]
[ 0.000000] node 0: [mem 0x00100000-0xbe0f7fff]
[ 0.000000] node 0: [mem 0xbe2f9000-0xbee4afff]
[ 0.000000] node 0: [mem 0xbee71000-0xbee7ffff]
[ 0.000000] node 0: [mem 0xbeeab000-0xbeeb6fff]
[ 0.000000] node 0: [mem 0xbeebc000-0xbeebdfff]
[ 0.000000] On node 0 totalpages: 781317
[ 0.000000] free_area_init_node: node 0, pgdat c1707d00, node_mem_map f4fb4020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4334 pages used for memmap
[ 0.000000] HighMem zone: 554089 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] e820: [mem 0xc0000000-0xf00f7fff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f4f86000 s33280 r0 d24064 u57344
[ 0.000000] pcpu-alloc: s33280 r0 d24064 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779541
[ 0.000000] Kernel command line: root=/dev/sda5 ro rootfstype=btrfs systemd.unit=graphical.target initrd=EFI\arch\initramfs-arch-fallback.img
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 6256104 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:000beebe)
[ 0.000000] Memory: 3038836K/3125268K available (4472K kernel code, 448K rwdata, 1320K rodata, 588K init, 972K bss, 86432K reserved, 2186224K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc171b000 - 0xc17ae000 ( 588 kB)
.data : 0xc155e74a - 0xc171a240 (1774 kB)
.text : 0xc1100000 - 0xc155e74a (4473 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f4408000 soft=f440a000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2161.213 MHz processor
[ 0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 4324.52 BogoMIPS (lpj=7204043)
[ 0.003340] pid_max: default: 32768 minimum: 301
[ 0.024828] Security Framework initialized
[ 0.024845] AppArmor: AppArmor disabled by boot time parameter
[ 0.024847] Yama: becoming mindful.
[ 0.024866] Mount-cache hash table entries: 512
[ 0.025182] Initializing cgroup subsys memory
[ 0.025193] Initializing cgroup subsys devices
[ 0.025196] Initializing cgroup subsys freezer
[ 0.025199] Initializing cgroup subsys net_cls
[ 0.025202] Initializing cgroup subsys blkio
[ 0.025241] CPU: Physical Processor ID: 0
[ 0.025243] CPU: Processor Core ID: 0
[ 0.025246] mce: CPU supports 6 MCE banks
[ 0.025257] CPU0: Thermal monitoring enabled (TM2)
[ 0.025272] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
[ 0.025387] Freeing SMP alternatives memory: 20K (c17ae000 - c17b3000)
[ 0.026346] ACPI: Core revision 20131115
[ 0.029337] ACPI: All ACPI Tables successfully acquired
[ 0.031575] ftrace: allocating 20090 entries in 40 pages
[ 0.040091] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.040528] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.073872] smpboot: CPU0: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz (fam: 06, model: 0f, stepping: 06)
[ 0.076666] Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.076666] perf_event_intel: PEBS disabled due to CPU errata
[ 0.076666] ... version: 2
[ 0.076666] ... bit width: 40
[ 0.076666] ... generic registers: 2
[ 0.076666] ... value mask: 000000ffffffffff
[ 0.076666] ... max period: 000000007fffffff
[ 0.076666] ... fixed-purpose events: 3
[ 0.076666] ... event mask: 0000000700000003
[ 0.096743] CPU 1 irqstacks, hard=f44cc000 soft=f44ce000
[ 0.096746] x86: Booting SMP configuration:
[ 0.006666] Initializing CPU#1
[ 0.109977] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.096748] .... node #0, CPUs: #1
[ 0.109995] x86: Booted up 1 node, 2 CPUs
[ 0.109999] smpboot: Total of 2 processors activated (8648.05 BogoMIPS)
[ 0.112323] devtmpfs: initialized
[ 0.112323] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[ 0.112323] PM: Registering ACPI NVS region [mem 0xbe0f8000-0xbe2f8fff] (2101248 bytes)
[ 0.112323] PM: Registering ACPI NVS region [mem 0xbeebe000-0xbeeeefff] (200704 bytes)
[ 0.112323] RTC time: 2:13:52, date: 04/03/14
[ 0.112323] NET: Registered protocol family 16
[ 0.112323] cpuidle: using governor ladder
[ 0.112323] cpuidle: using governor menu
[ 0.112323] ACPI: bus type PCI registered
[ 0.112323] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.112323] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
[ 0.112323] PCI: not using MMCONFIG
[ 0.125963] PCI: Using configuration type 1 for base access
[ 0.130090] bio: create slab <bio-0> at 0
[ 0.130110] ACPI: Added _OSI(Module Device)
[ 0.130110] ACPI: Added _OSI(Processor Device)
[ 0.130110] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.130110] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.131070] ACPI : EC: EC description table is found, configuring boot EC
[ 0.133507] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.144021] ACPI: SSDT beeb8c10 0002AE (v01 APPLE Cpu0Ist 00003000 INTL 20050309)
[ 0.144265] ACPI: Dynamic OEM Table Load:
[ 0.144268] ACPI: SSDT (null) 0002AE (v01 APPLE Cpu0Ist 00003000 INTL 20050309)
[ 0.144381] ACPI: SSDT beeb8910 0002A0 (v01 APPLE Cpu0Cst 00003001 INTL 20050309)
[ 0.144605] ACPI: Dynamic OEM Table Load:
[ 0.144608] ACPI: SSDT (null) 0002A0 (v01 APPLE Cpu0Cst 00003001 INTL 20050309)
[ 0.153597] ACPI: SSDT beeb8f10 000087 (v01 APPLE Cpu1Ist 00003000 INTL 20050309)
[ 0.153830] ACPI: Dynamic OEM Table Load:
[ 0.153833] ACPI: SSDT (null) 000087 (v01 APPLE Cpu1Ist 00003000 INTL 20050309)
[ 0.153929] ACPI: SSDT beeb7f10 000085 (v01 APPLE Cpu1Cst 00003000 INTL 20050309)
[ 0.154154] ACPI: Dynamic OEM Table Load:
[ 0.154157] ACPI: SSDT (null) 000085 (v01 APPLE Cpu1Cst 00003000 INTL 20050309)
[ 0.173527] ACPI: Interpreter enabled
[ 0.173543] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.173549] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.173567] ACPI: (supports S0 S3 S4 S5)
[ 0.173569] ACPI: Using IOAPIC for interrupt routing
[ 0.173590] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
[ 0.174736] PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] reserved in ACPI motherboard resources
[ 0.174741] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) (size reduced!)
[ 0.174743] PCI: Using MMCONFIG for extended config space
[ 0.174760] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.174914] ACPI: No dock devices found.
[ 0.187223] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.187231] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.187699] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.188040] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.188044] acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.188048] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.188051] acpi PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff] (ignored)
[ 0.188054] acpi PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff] (ignored)
[ 0.188057] acpi PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff] (ignored)
[ 0.188060] acpi PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff] (ignored)
[ 0.188063] acpi PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[ 0.188066] acpi PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.188069] acpi PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.188072] acpi PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
[ 0.188075] acpi PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff] (ignored)
[ 0.188079] acpi PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff] (ignored)
[ 0.188082] acpi PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff] (ignored)
[ 0.188085] acpi PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff] (ignored)
[ 0.188088] acpi PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff] (ignored)
[ 0.188091] acpi PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff] (ignored)
[ 0.188094] PCI: root bus 00: using default resources
[ 0.188097] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.188289] PCI host bridge to bus 0000:00
[ 0.188294] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.188297] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.188300] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.188313] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
[ 0.188442] pci 0000:00:02.0: [8086:27a2] type 00 class 0x030000
[ 0.188457] pci 0000:00:02.0: reg 0x10: [mem 0xd0380000-0xd03fffff]
[ 0.188465] pci 0000:00:02.0: reg 0x14: [io 0x20e0-0x20e7]
[ 0.188473] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
[ 0.188480] pci 0000:00:02.0: reg 0x1c: [mem 0xd0400000-0xd043ffff]
[ 0.188609] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
[ 0.188619] pci 0000:00:02.1: reg 0x10: [mem 0xd0300000-0xd037ffff]
[ 0.190132] pci 0000:00:07.0: [8086:27a3] type 00 class 0x110100
[ 0.190145] pci 0000:00:07.0: reg 0x10: [mem 0xd0444000-0xd0444fff]
[ 0.190315] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.190337] pci 0000:00:1b.0: reg 0x10: [mem 0xd0440000-0xd0443fff 64bit]
[ 0.190432] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.190548] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.190664] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.190779] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[ 0.190894] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.191014] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.191074] pci 0000:00:1d.0: reg 0x20: [io 0x2080-0x209f]
[ 0.191174] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.191228] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.191288] pci 0000:00:1d.1: reg 0x20: [io 0x2060-0x207f]
[ 0.191386] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.191437] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.191497] pci 0000:00:1d.2: reg 0x20: [io 0x2040-0x205f]
[ 0.191595] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.191648] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.191707] pci 0000:00:1d.3: reg 0x20: [io 0x2020-0x203f]
[ 0.191805] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.191871] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.191895] pci 0000:00:1d.7: reg 0x10: [mem 0xd0445400-0xd04457ff]
[ 0.191989] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.192048] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.192103] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.192280] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[ 0.192399] pci 0000:00:1f.0: address space collision: [io 0x0400-0x047f] conflicts with ACPI CPU throttle [??? 0x00000410-0x00000415 flags 0x80000000]
[ 0.192407] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 0.192412] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f)
[ 0.192417] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
[ 0.192424] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f)
[ 0.192557] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018f
[ 0.192576] pci 0000:00:1f.1: reg 0x10: [io 0x20d8-0x20df]
[ 0.192589] pci 0000:00:1f.1: reg 0x14: [io 0x20f4-0x20f7]
[ 0.192602] pci 0000:00:1f.1: reg 0x18: [io 0x20d0-0x20d7]
[ 0.192616] pci 0000:00:1f.1: reg 0x1c: [io 0x20f0-0x20f3]
[ 0.192628] pci 0000:00:1f.1: reg 0x20: [io 0x20b0-0x20bf]
[ 0.192752] pci 0000:00:1f.2: [8086:27c5] type 00 class 0x010601
[ 0.192778] pci 0000:00:1f.2: reg 0x10: [io 0x20c8-0x20cf]
[ 0.192792] pci 0000:00:1f.2: reg 0x14: [io 0x20ec-0x20ef]
[ 0.192805] pci 0000:00:1f.2: reg 0x18: [io 0x20c0-0x20c7]
[ 0.192818] pci 0000:00:1f.2: reg 0x1c: [io 0x20e8-0x20eb]
[ 0.192831] pci 0000:00:1f.2: reg 0x20: [io 0x20a0-0x20af]
[ 0.192844] pci 0000:00:1f.2: reg 0x24: [mem 0xd0445000-0xd04453ff]
[ 0.192905] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.193010] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.193068] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.193303] pci 0000:01:00.0: [11ab:4362] type 00 class 0x020000
[ 0.193340] pci 0000:01:00.0: reg 0x10: [mem 0xd0200000-0xd0203fff 64bit]
[ 0.193358] pci 0000:01:00.0: reg 0x18: [io 0x1000-0x10ff]
[ 0.193421] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[ 0.193520] pci 0000:01:00.0: supports D1 D2
[ 0.193523] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.193561] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.193605] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.193619] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.193625] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.193631] pci 0000:00:1c.0: bridge window [mem 0xd0200000-0xd02fffff]
[ 0.193763] pci 0000:02:00.0: [168c:0024] type 00 class 0x028000
[ 0.193793] pci 0000:02:00.0: reg 0x10: [mem 0xd0100000-0xd010ffff 64bit]
[ 0.193938] pci 0000:02:00.0: supports D1
[ 0.193941] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.193991] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.194036] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.194050] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.194059] pci 0000:00:1c.1: bridge window [mem 0xd0100000-0xd01fffff]
[ 0.194150] pci 0000:03:03.0: [11c1:5811] type 00 class 0x0c0010
[ 0.194175] pci 0000:03:03.0: reg 0x10: [mem 0xd0000000-0xd0000fff]
[ 0.194282] pci 0000:03:03.0: supports D1 D2
[ 0.194285] pci 0000:03:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.194405] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[ 0.194415] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd00fffff]
[ 0.194424] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.194427] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.194458] pci_bus 0000:00: on NUMA node 0
[ 0.194667] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.194750] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.194831] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.194914] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.194994] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.195073] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.195152] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.195231] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.196881] ACPI: Enabled 5 GPEs in block 00 to 1F
[ 0.196893] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.196941] Found 1 acpi root devices
[ 0.196975] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.197034] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.197034] vgaarb: loaded
[ 0.197034] vgaarb: bridge control possible 0000:00:02.0
[ 0.197034] PCI: Using ACPI for IRQ routing
[ 0.200581] PCI: pci_cache_line_size set to 64 bytes
[ 0.200654] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[ 0.200657] e820: reserve RAM buffer [mem 0xbaacb010-0xbbffffff]
[ 0.200659] e820: reserve RAM buffer [mem 0xbe0f8000-0xbfffffff]
[ 0.200662] e820: reserve RAM buffer [mem 0xbee4b000-0xbfffffff]
[ 0.200665] e820: reserve RAM buffer [mem 0xbee80000-0xbfffffff]
[ 0.200667] e820: reserve RAM buffer [mem 0xbeeb7000-0xbfffffff]
[ 0.200670] e820: reserve RAM buffer [mem 0xbeebe000-0xbfffffff]
[ 0.200795] NetLabel: Initializing
[ 0.200797] NetLabel: domain hash size = 128
[ 0.200799] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.200814] NetLabel: unlabeled traffic allowed by default
[ 0.200862] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.200869] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.200875] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.202899] Switched to clocksource hpet
[ 0.207652] pnp: PnP ACPI init
[ 0.207675] ACPI: bus type PNP registered
[ 0.207781] system 00:00: [mem 0xf0000000-0xf3ffffff] could not be reserved
[ 0.207785] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.207789] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.207792] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.207796] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.207799] system 00:00: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.207805] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.208094] pnp 00:01: Plug and Play ACPI device, IDs APP0001 (active)
[ 0.208143] pnp 00:02: [dma 4]
[ 0.208184] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.208229] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.208366] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.208371] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.208428] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.208468] pnp 00:06: disabling [io 0x1640-0x164f] because it overlaps 0000:00:1c.0 BAR 13 [io 0x1000-0x1fff]
[ 0.208526] system 00:06: [io 0x0680-0x06ef] has been reserved
[ 0.208530] system 00:06: [io 0x0800-0x080f] has been reserved
[ 0.208533] system 00:06: [io 0x0810-0x0817] has been reserved
[ 0.208536] system 00:06: [io 0x0400-0x047f] could not be reserved
[ 0.208540] system 00:06: [io 0x0500-0x053f] has been reserved
[ 0.208544] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.208593] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.212349] pnp: PnP ACPI: found 8 devices
[ 0.212351] ACPI: bus type PNP unregistered
[ 0.250634] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.250654] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x001fffff pref] to [bus 01] add_size 200000
[ 0.250667] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.250672] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.250687] pci 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
[ 0.250694] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
[ 0.250698] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.250701] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.250707] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd0500000-0xd07fffff pref]
[ 0.250712] pci 0000:00:1c.1: BAR 15: assigned [mem 0xd0800000-0xd09fffff 64bit pref]
[ 0.250716] pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.250721] pci 0000:01:00.0: BAR 6: assigned [mem 0xd0500000-0xd051ffff pref]
[ 0.250725] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.250730] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.250737] pci 0000:00:1c.0: bridge window [mem 0xd0200000-0xd02fffff]
[ 0.250743] pci 0000:00:1c.0: bridge window [mem 0xd0500000-0xd07fffff pref]
[ 0.250752] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.250756] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.250763] pci 0000:00:1c.1: bridge window [mem 0xd0100000-0xd01fffff]
[ 0.250770] pci 0000:00:1c.1: bridge window [mem 0xd0800000-0xd09fffff 64bit pref]
[ 0.250778] pci 0000:00:1e.0: PCI bridge to [bus 03]
[ 0.250786] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd00fffff]
[ 0.250798] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.250801] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.250805] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.250808] pci_bus 0000:01: resource 1 [mem 0xd0200000-0xd02fffff]
[ 0.250811] pci_bus 0000:01: resource 2 [mem 0xd0500000-0xd07fffff pref]
[ 0.250814] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.250817] pci_bus 0000:02: resource 1 [mem 0xd0100000-0xd01fffff]
[ 0.250820] pci_bus 0000:02: resource 2 [mem 0xd0800000-0xd09fffff 64bit pref]
[ 0.250823] pci_bus 0000:03: resource 1 [mem 0xd0000000-0xd00fffff]
[ 0.250826] pci_bus 0000:03: resource 4 [io 0x0000-0xffff]
[ 0.250829] pci_bus 0000:03: resource 5 [mem 0x00000000-0xffffffff]
[ 0.250879] NET: Registered protocol family 2
[ 0.251083] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.251103] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.251133] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.251164] TCP: reno registered
[ 0.251167] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.251178] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.251249] NET: Registered protocol family 1
[ 0.251265] pci 0000:00:02.0: Boot video device
[ 0.252430] pci 0000:00:1d.7: enabling device (0000 -> 0002)
[ 0.252740] PCI: CLS mismatch (256 != 64), using 64 bytes
[ 0.252796] Unpacking initramfs...
[ 0.711581] Freeing initrd memory: 16808K (f6794000 - f77fe000)
[ 0.711803] apm: BIOS not found.
[ 0.711854] Scanning for low memory corruption every 60 seconds
[ 0.712353] audit: initializing netlink socket (disabled)
[ 0.712374] type=2000 audit(1396491231.709:1): initialized
[ 0.727981] bounce pool size: 64 pages
[ 0.727995] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.730140] zbud: loaded
[ 0.730279] VFS: Disk quotas dquot_6.5.2
[ 0.730349] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.730612] msgmni has been set to 1756
[ 0.730696] Key type big_key registered
[ 0.731049] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.731109] io scheduler noop registered
[ 0.731112] io scheduler deadline registered
[ 0.731157] io scheduler cfq registered (default)
[ 0.731244] pcieport 0000:00:1c.0: device [8086:27d0] has invalid IRQ; check vendor BIOS
[ 0.731473] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.731596] pcieport 0000:00:1c.1: device [8086:27d2] has invalid IRQ; check vendor BIOS
[ 0.731773] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.731939] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.731942] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.731948] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.731975] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.731978] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.731984] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.732004] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.732058] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0
[ 0.732098] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[ 0.732115] pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 27d2 ss_vid 0 ss_did 0
[ 0.732151] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
[ 0.732159] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.732240] intel_idle: does not run on family 6 model 15
[ 0.732271] GHES: HEST is not enabled!
[ 0.732286] isapnp: Scanning for PnP cards...
[ 1.089038] isapnp: No Plug & Play device found
[ 1.089104] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.089870] rtc_cmos 00:07: RTC can wake from S4
[ 1.090053] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.090089] rtc_cmos 00:07: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.090225] drop_monitor: Initializing network drop monitor service
[ 1.090318] TCP: cubic registered
[ 1.090466] NET: Registered protocol family 10
[ 1.090724] NET: Registered protocol family 17
[ 1.090736] Key type dns_resolver registered
[ 1.090918] Using IPI No-Shortcut mode
[ 1.091080] registered taskstats version 1
[ 1.091660] Magic number: 10:587:206
[ 1.091735] rtc_cmos 00:07: setting system clock to 2014-04-03 02:13:53 UTC (1396491233)
[ 1.091810] PM: Hibernation image not present or could not be loaded.
[ 1.092134] Freeing unused kernel memory: 588K (c171b000 - c17ae000)
[ 1.092258] Write protecting the kernel text: 4476k
[ 1.092297] Write protecting the kernel read-only data: 1324k
[ 1.101141] random: systemd-tmpfile urandom read with 3 bits of entropy available
[ 1.103059] systemd-udevd[48]: starting version 212
[ 1.105813] Linux agpgart interface v0.103
[ 1.107850] [drm] Initialized drm 1.1.0 20060810
[ 1.108901] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[ 1.109016] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 1.110230] agpgart-intel 0000:00:00.0: detected 16384K stolen memory
[ 1.110426] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 1.111004] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 1.111050] ACPI: Lid Switch [LID0]
[ 1.111122] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.111128] ACPI: Power Button [PWRB]
[ 1.111194] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 1.111198] ACPI: Sleep Button [SLPB]
[ 1.111287] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.111291] ACPI: Power Button [PWRF]
[ 1.111681] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.111840] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 1.118232] [drm] Memory usable by graphics device = 256M
[ 1.118511] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.118513] [drm] Driver supports precise vblank timestamp query.
[ 1.118526] i915 0000:00:02.0: Invalid ROM contents
[ 1.118533] [drm] failed to find VBIOS tables
[ 1.118590] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.289208] [drm] initialized overlay support
[ 1.713356] tsc: Refined TSC clocksource calibration: 2161.249 MHz
[ 1.866111] fbcon: inteldrmfb (fb0) is primary device
[ 2.222132] Console: switching to colour frame buffer device 160x50
[ 2.227666] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.227669] i915 0000:00:02.0: registered panic notifier
[ 2.227679] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.271425] SCSI subsystem initialized
[ 2.274827] libata version 3.00 loaded.
[ 2.276074] ACPI: bus type USB registered
[ 2.276110] usbcore: registered new interface driver usbfs
[ 2.276125] usbcore: registered new interface driver hub
[ 2.276175] usbcore: registered new device driver usb
[ 2.277269] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.277466] ehci-pci: EHCI PCI platform driver
[ 2.277706] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 2.277715] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.277734] ehci-pci 0000:00:1d.7: debug port 1
[ 2.281643] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 2.281670] ehci-pci 0000:00:1d.7: irq 21, io mem 0xd0445400
[ 2.282153] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.290028] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.290299] hub 1-0:1.0: USB hub found
[ 2.290310] hub 1-0:1.0: 8 ports detected
[ 2.291047] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.291057] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.291089] uhci_hcd 0000:00:1d.0: irq 21, io base 0x00002080
[ 2.291321] hub 2-0:1.0: USB hub found
[ 2.291332] hub 2-0:1.0: 2 ports detected
[ 2.291663] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.291671] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.291701] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060
[ 2.292107] hub 3-0:1.0: USB hub found
[ 2.292118] hub 3-0:1.0: 2 ports detected
[ 2.292428] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.292435] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.292482] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040
[ 2.292686] hub 4-0:1.0: USB hub found
[ 2.292697] hub 4-0:1.0: 2 ports detected
[ 2.293011] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.293018] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.293049] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002020
[ 2.293454] hub 5-0:1.0: USB hub found
[ 2.293465] hub 5-0:1.0: 2 ports detected
[ 2.293800] ahci 0000:00:1f.2: version 3.0
[ 2.293994] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[ 2.294079] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x4 impl SATA mode
[ 2.294084] ahci 0000:00:1f.2: flags: 64bit ncq ilck pm led clo pio slum part
[ 2.299571] scsi0 : ahci
[ 2.300773] scsi1 : ahci
[ 2.301519] scsi2 : ahci
[ 2.301793] scsi3 : ahci
[ 2.301869] ata1: DUMMY
[ 2.301872] ata2: DUMMY
[ 2.301876] ata3: SATA max UDMA/133 abar m1024@0xd0445000 port 0xd0445200 irq 42
[ 2.301878] ata4: DUMMY
[ 2.301964] ata_piix 0000:00:1f.1: version 2.13
[ 2.303447] scsi4 : ata_piix
[ 2.303539] scsi5 : ata_piix
[ 2.303600] ata5: PATA max UDMA/100 cmd 0x20d8 ctl 0x20f4 bmdma 0x20b0 irq 18
[ 2.303603] ata6: PATA max UDMA/100 cmd 0x20d0 ctl 0x20f0 bmdma 0x20b8 irq 18
[ 2.333409] firewire_ohci 0000:03:03.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[ 2.473835] ata5.00: ATAPI: MATSHITADVD-R UJ-857E, ZB0E, max UDMA/66
[ 2.487059] ata5.00: configured for UDMA/66
[ 2.620034] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.620400] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.620486] ata3.00: ATA-9: M4-CT256M4SSD2, 000F, max UDMA/100
[ 2.620490] ata3.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.620880] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.620967] ata3.00: configured for UDMA/100
[ 2.621138] scsi 2:0:0:0: Direct-Access ATA M4-CT256M4SSD2 000F PQ: 0 ANSI: 5
[ 2.622978] scsi 4:0:0:0: CD-ROM MATSHITA DVD-R UJ-857E ZB0E PQ: 0 ANSI: 5
[ 2.628440] sd 2:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 2.628549] sd 2:0:0:0: [sda] Write Protect is off
[ 2.628553] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.628585] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.629901] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 2.629904] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.630101] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 2.630316] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
[ 2.631133] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.681713] xor: measuring software checksum speed
[ 2.713345] pIII_sse : 6420.000 MB/sec
[ 2.746690] Switched to clocksource tsc
[ 2.746718] prefetch64-sse: 7302.000 MB/sec
[ 2.746721] xor: using function: prefetch64-sse (7302.000 MB/sec)
[ 2.803340] raid6: mmxx1 2408 MB/s
[ 2.833438] firewire_core 0000:03:03.0: created device fw0: GUID 001b63fffe882224, S400
[ 2.853355] usb 1-4: new high-speed USB device number 3 using ehci-pci
[ 2.860009] raid6: mmxx2 2773 MB/s
[ 2.916671] raid6: sse1x1 1464 MB/s
[ 2.973357] raid6: sse1x2 2019 MB/s
[ 3.030025] raid6: sse2x1 2715 MB/s
[ 3.086675] raid6: sse2x2 3448 MB/s
[ 3.086678] raid6: using algorithm sse2x2 (3448 MB/s)
[ 3.086680] raid6: using ssse3x1 recovery algorithm
[ 3.093280] bio: create slab <bio-1> at 1
[ 3.094419] Btrfs loaded
[ 3.095092] btrfs: device label root devid 1 transid 4857 /dev/sda5
[ 3.095774] btrfs: device label home devid 1 transid 199898 /dev/sda7
[ 3.161953] btrfs: device label root devid 1 transid 4857 /dev/sda5
[ 3.162678] btrfs: device label home devid 1 transid 199898 /dev/sda7
[ 3.178283] btrfs: device label home devid 1 transid 199898 /dev/sda7
[ 3.178935] btrfs: device label root devid 1 transid 4857 /dev/sda5
[ 3.189620] btrfs: device label root devid 1 transid 4857 /dev/sda5
[ 3.190409] btrfs: disk space caching is enabled
[ 3.201691] Btrfs detected SSD devices, enabling SSD mode
[ 3.573432] systemd[1]: systemd 212 running in system mode. (+PAM -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
[ 3.573617] systemd[1]: Detected architecture 'x86'.
[ 3.574987] systemd[1]: Set hostname to <archbook>.
[ 3.630096] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 3.630650] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.630731] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.630747] systemd[1]: Starting Remote File Systems.
[ 3.630908] systemd[1]: Reached target Remote File Systems.
[ 3.630942] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 3.631207] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.631227] systemd[1]: Starting Encrypted Volumes.
[ 3.631351] systemd[1]: Reached target Encrypted Volumes.
[ 3.631373] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 3.631421] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.631436] systemd[1]: Expecting device dev-sda6.device...
[ 3.631545] systemd[1]: Expecting device dev-disk-by\x2duuid-5b847583\x2de4cb\x2d444d\x2dac05\x2db3ec8f1c77ff.device...
[ 3.631698] systemd[1]: Expecting device dev-disk-by\x2duuid-462ff9d5\x2d22a9\x2d3b55\x2d9e3e\x2d39009d6be0b4.device...
[ 3.631849] systemd[1]: Starting Root Slice.
[ 3.643428] systemd[1]: Created slice Root Slice.
[ 3.643446] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 3.643611] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.643628] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.643774] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.643790] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.643940] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.643955] systemd[1]: Starting LVM2 metadata daemon socket.
[ 3.644108] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.644124] systemd[1]: Starting User and Session Slice.
[ 3.644482] systemd[1]: Created slice User and Session Slice.
[ 3.644503] systemd[1]: Starting udev Control Socket.
[ 3.644646] systemd[1]: Listening on udev Control Socket.
[ 3.644665] systemd[1]: Starting udev Kernel Socket.
[ 3.644803] systemd[1]: Listening on udev Kernel Socket.
[ 3.644820] systemd[1]: Starting Journal Socket.
[ 3.644991] systemd[1]: Listening on Journal Socket.
[ 3.645013] systemd[1]: Starting System Slice.
[ 3.645365] systemd[1]: Created slice System Slice.
[ 3.645389] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.646048] systemd[1]: Mounting Huge Pages File System...
[ 3.646809] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.650099] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 3.651287] systemd[1]: Starting udev Coldplug all Devices...
[ 3.657301] systemd[1]: Starting Load Kernel Modules...
[ 3.658127] systemd[1]: Mounting Debug File System...
[ 3.658754] systemd[1]: Starting Setup Virtual Console...
[ 3.659815] systemd[1]: Starting Apply Kernel Variables...
[ 3.660641] systemd[1]: Starting Set Up Additional Binary Formats...
[ 3.661627] systemd[1]: Starting system-urxvtd.slice.
[ 3.662195] systemd[1]: Created slice system-urxvtd.slice.
[ 3.662227] systemd[1]: Starting system-getty.slice.
[ 3.663290] systemd[1]: Created slice system-getty.slice.
[ 3.663319] systemd[1]: Starting Journal Service...
[ 3.664848] systemd[1]: Started Journal Service.
[ 3.677214] btrfs: use lzo compression
[ 3.677219] btrfs: use ssd allocation scheme
[ 3.677226] btrfs: enabling auto defrag
[ 3.677229] btrfs: enabling inode map caching
[ 3.677231] btrfs: disk space caching is enabled
[ 3.715284] vboxdrv: Found 2 processor cores.
[ 3.716708] usb 2-2: new full-speed USB device number 2 using uhci_hcd
[ 3.722186] vboxdrv: fAsync=0 offMin=0x3c2 offMax=0xda9
[ 3.722268] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 3.722268] vboxdrv: Successfully loaded version 4.3.10_OSE (interface 0x001a0007).
[ 3.783071] vboxpci: IOMMU not found (not registered)
[ 3.816344] systemd-udevd[167]: starting version 212
[ 3.878200] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.881296] Monitor-Mwait will be used to enter C-1 state
[ 3.881307] Monitor-Mwait will be used to enter C-2 state
[ 3.881313] Monitor-Mwait will be used to enter C-3 state
[ 3.881394] tsc: Marking TSC unstable due to TSC halts in idle
[ 3.881443] ACPI: acpi_idle registered with cpuidle
[ 3.882023] ACPI: AC Adapter [ADP1] (on-line)
[ 3.882099] Switched to clocksource hpet
[ 3.915143] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 3.915340] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 3.956144] intel_rng: FWH not detected
[ 3.983260] sky2: driver version 1.30
[ 3.983769] sky2 0000:01:00.0: Yukon-2 EC chip revision 2
[ 3.984190] sky2 0000:01:00.0: irq 44 for MSI/MSI-X
[ 3.984693] sky2 0000:01:00.0 eth0: addr 00:19:e3:40:6b:e2
[ 4.006473] input: HDA Intel SPDIF In as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 4.008040] ACPI: Battery Slot [BAT0] (battery present)
[ 4.009840] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 4.010988] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 4.014099] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 4.015212] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[ 4.015227] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.015235] ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 4.015245] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.015249] ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 4.015257] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.015261] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 4.024430] cfg80211: Calling CRDA to update world regulatory domain
[ 4.025189] leds_ss4200: no LED devices found
[ 4.031105] i801_smbus 0000:00:1f.3: enabling device (0000 -> 0001)
[ 4.031395] ACPI Warning: 0x0000efa0-0x0000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251)
[ 4.031408] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.066172] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 4.082340] microcode: CPU0 sig=0x6f6, pf=0x20, revision=0xc7
[ 4.083938] platform microcode: Direct firmware load failed with error -2
[ 4.083946] platform microcode: Falling back to user helper
[ 4.128874] btrfs: device label root devid 1 transid 4857 /dev/sda5
[ 4.140066] usb 4-2: new full-speed USB device number 2 using uhci_hcd
[ 4.145181] btrfs: device label home devid 1 transid 199898 /dev/sda7
[ 4.161845] ath9k 0000:02:00.0: enabling device (0000 -> 0002)
[ 4.180225] btrfs: device label home devid 1 transid 199898 /dev/sda7
[ 4.181071] btrfs: use lzo compression
[ 4.181079] btrfs: use ssd allocation scheme
[ 4.181090] btrfs: enabling auto defrag
[ 4.181096] btrfs: enabling inode map caching
[ 4.181099] btrfs: disk space caching is enabled
[ 4.234922] applesmc: key=226 fan=1 temp=10 index=10 acc=1 lux=0 kbd=0
[ 4.247383] Adding 1048572k swap on /dev/sda6. Priority:-1 extents:1 across:1048572k SSFS
[ 4.264911] hfsplus: Filesystem was not cleanly unmounted, running fsck.hfsplus is recommended. mounting read-only.
[ 4.303293] input: applesmc as /devices/platform/applesmc.768/input/input10
[ 4.316157] iTCO_vendor_support: vendor-support=0
[ 4.318231] usb 1-4: Direct firmware load failed with error -2
[ 4.318239] usb 1-4: Falling back to user helper
[ 4.325798] microcode: CPU1 sig=0x6f6, pf=0x20, revision=0xc7
[ 4.325836] platform microcode: Direct firmware load failed with error -2
[ 4.325842] platform microcode: Falling back to user helper
[ 4.352238] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 4.362997] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 4.363053] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0460)
[ 4.371059] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.382811] Unable to load isight firmware
[ 4.382874] usbcore: registered new interface driver isight_firmware
[ 4.398462] random: nonblocking pool is initialized
[ 4.408160] systemd-journald[146]: Received request to flush runtime journal from PID 1
[ 4.451146] appletouch 2-2:1.1: Geyser mode initialized.
[ 4.451279] input: appletouch as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input11
[ 4.451581] usbcore: registered new interface driver appletouch
[ 4.477422] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.505622] usbcore: registered new interface driver usbhid
[ 4.505625] usbhid: USB HID core driver
[ 4.511187] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input12
[ 4.516069] apple 0003:05AC:021A.0001: input,hidraw0: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2/input0
[ 4.516130] mousedev: PS/2 mouse device common for all mice
[ 4.518122] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.2/input/input13
[ 4.520132] apple 0003:05AC:021A.0002: input,hidraw1: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2/input2
[ 4.526592] input: Apple Computer, Inc. IR Receiver as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input14
[ 4.527505] appleir 0003:05AC:8240.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2/input0
[ 4.544779] ath: EEPROM regdomain: 0x64
[ 4.544782] ath: EEPROM indicates we should expect a direct regpair map
[ 4.544785] ath: Country alpha2 being used: 00
[ 4.544787] ath: Regpair used: 0x64
[ 4.546745] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[ 4.555349] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 4.556184] ieee80211 phy0: Atheros AR5418 MAC/BB Rev:2 AR5133 RF Rev:81 mem=0xfbea0000, irq=17
[ 4.290340] systemd-udevd[184]: renamed network interface eth0 to enp1s0
[ 4.580350] systemd-udevd[176]: renamed network interface wlan0 to wls1
[ 4.776795] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input15
[ 4.777809] hid-generic 0003:05AC:1000.0004: input,hidraw3: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1/input0
[ 4.778302] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input16
[ 4.779613] hid-generic 0003:05AC:1000.0005: input,hidraw4: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1/input1
Any help would be appreciated.
Last edited by bb010g (2014-04-03 19:07:54)

It used to be in there (id 226635 is the last one with it); should I clean it up a bit and put it back with a bit more of a disclaimer?

External iSight w/MacBook Pro?

Hi all,
I currently have an Intel mini w/external iSight camera. Can I use that camera with the MacBook Pro instead of the built-in iSight camera on the MacBook?
Tia,
jb
Mac OS X (10.4.7)

Bill,
Tried a 3-way iChat yet?<<</div>
Not yet...the L.A. connection works ~16 hrs./day in public TV now (the best post-production producer in that city, imho...and having worked for her as an audio post guy on Rescue 911 for 5 1/2 years I think I'd know <G> Oh, we were married too <GGG>).
The WA. connection raise organic veggies and sells 'em on weekends, as well as 'kettle corn'. Peak season at the moment for the veg stuff, not much time for Mac recreation. Come about Oct. they can relax, and use the MacBook Pro 17" as their portal on the world. Smart folks, but the old expression holds true...What do you get if you work your fingers to the bone? Bony fingers They really work hard.
Myself, I like the mini, but heck, I'm supposed to have the slowest Mac??? <GGG> Ordered the MacBook Pro 17" from Macconnection, gonna send the mini & iSight external to the other L.A. person. I'm hoping all goes well as regards iChat/video. Did I mention how irritating this forum is if one chooses to edit a post? Consider that done
Mac OS X (10.4.7)

Maximum FPS recording with built-in iSight on Macbook Pro

Does anyone know if the built-in iSight on the Macbook Pro has a limit on the recording frames per second? I'm trying to make record some clips using iMovie, but it only records at 15 fps. I tried Quicktime Broadcaster with settings at 29.97 fps, but only got slightly better (17 fps). Do I NEED QuickTime Pro in order to record at 30 fps (29.97) or is this a hardware limitation?
Thanks in advance!
J

Welcome to Apple Discussions, itjaslee
Until you hear from some MacBook users, here are two things you can try:(0) Best video quality requires much more light that what I (and most others) consider normal room light. Try using much brighter lighting.
As explained in this Apple kBase article, iSight switches to 15 frames-per-second to improve picture quality in what it considers "low-light conditions."
http://docs.info.apple.com/article.html?artnum=93235
This Apple kBase article gives you some more particulars about best types of lighting, etc.:
http://docs.info.apple.com/article.html?artnum=93273
Both were written for the external iSight, but the same tips may help you.
(1) Best video quality requires lots of disk space and processor power. Your MacBook Pro has a very powerful processor, but any processor can be overloaded by the user.
Almost all external drives will be slower than your Mac's internal drive. Record direct to your internal (startup) drive. If your internal drive has less than 10 GB available, free up some space. OS X slows down when your drive gets too full.
If you have more than one applications running when you notice your problem, restart you Mac, launch only the application you are using to record, and check your frame rate again.If you need to post back for other suggestions, you might confirm that:
(a) your 15 fps is the actual recording speed versus the playback speed on your Mac.
(b) you have set the QT Broadcaster settings to 30 fps. To change the QTB frame rate, click the "Video" tab and check the box for "Enable Video Stream." Then set the frame rate and disable the video stream to make your recording.
(c) you have set iMovie HD's default frame rate per this help instruction:
http://docs.info.apple.com/article.html?path=iMovie/HD/en/im172.html
Jim
G4 PB 1.67 GHz Mac OS X (10.4.9) G5 DP 1.8 External iSight

Built in iSight in MacBook isn't recognized by any programme

I own a MacBook with a built-in iSight, which isn't recognized neither by PhotoBooth nor by iChat nor by iMovie. PhotoBoth tells me it cannot open because no camera is attached or the camera is in use by another application, the other apps simply don't recognize it.
Well, there is no other application running, only one at a time. But the camera isn't shown at the USB:high-speed bus section in the SystemProfiler neither.
I have already tried to contact the hotline, which didn't help but rather worsened the problem - afterwards I wasn't able to even start the computer, thanks to their help. However, this got resolved later - just vanished, luckily. Well, but I will not call the hotline anymore. The problem with the camea persisted, remained the same.
As I'm living in Austria (Europe), I'm not able to visit an AppleStore. So I hope one of you will be able to help me.
Thank you,
Daniel T.

Well, you were right: it didn't. I had some hope for it helped others, see:
http://discussions.apple.com/thread.jspa?threadID=674970&tstart=0
Anyway, I will try to reset the PRAM and the PMU once more and if that won't help, I will send my MacBook to the service.
Thank you for your help.
Daniel T.

Isight on macbook (internal) not working

okay, I reinstalled (full) the macbook and once I came onto the account picture screen, the camera box displays only green with a strip of static on the top. Once that was done, I decided to test photobooth but still the camera doesn't seem to be able to get any image, just green! Is this a software problem or hardware? Before reinstall, it worked.
Mac mini, MacBook Mac OS X (10.4.7) 1GB, 1.25GB Ram (respectively)

My macbook had the same problem. It began after I installed bootcamp, which I have since updated to 1.1. Whenever I boot into windows xp and then back into Os X, the isight stops working. In photobooth I get a blank green screen with a few scribbling lines of static at the top, but in ichat I get the "in use by other application" error.
I tried a system X reinstall, a bootcamp reinstall, zapping the PRAM, etc. etc. What really killed me was that the isight camera continued to work FINE in windows, but not at all in Os X (I could almost hear Bill Gates snickering).
The solution turned out to be resetting the power management unit by unplugging, removing the battery and holding down the power button for 5 seconds. Works without having to zap PRAM after.
The annoying thing is that I have to do this EVERY TIME after I have booted into windows if I want the camera to work in Os X.
As other users have pointed out, bootcamp now includes a package that updates the isight firmware.
Interestingly, this does NOT happen on my intel iMac, only the macbook.
I'm hoping for a more elegant fix.
Anyone else?
Jason

Trouble using external iSight with MacBook Pro

So I bought a macbook pro and 23inch external display, decided to go on ebay and get an isight camera, found one brand new in the box....the problem Im having now is it will not work for audio, video works just fine but no audio, I have set up the proper resources but no dice, is this an issue or is it the isight?

Hello Russell Wittmann
So external iSight can give both audio and video if the application you are using to operate the iSight supports both functions. Many applications have preferences or menu items that can effect iSight operation, so check your settings.
Connect your iSight directly to your Mac and use the suggestions in How to test your (external) iSight to ensure it is functional. If you continue to have problems, the suggestions on that page will help you troubleshoot to find the source of your problem and fix anything that is user-correctable.
There are no user-serviceable parts in iSight, so if everything you can do fails, your iSight will need professional service unless you can exchange it for one that works. If the external iSight you bought on eBay is not covered by warranty from either Apple or the seller, see your local Apple Service Provider for service.
If your iSight needs parts that you or your Service Technician cannot locate, http://www.synaptech.com may be able to help you obtain those that are still available.
If your iSight needs service but you do not have access to an Apple Service Provider, see Apple's iSight Service: Frequently Asked Questions to request service directly from Apple.
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.2) External iSight

Trouble using external iSight with MacBook Pro (which has built in camera)

Hey Jim,
Have a question for you. I have a new MacBook Pro 17". I also have a 23" Cinema Display, and a left over Firewire external iSight camera (which I used to love).
Frequently I "dock" my MBP with my 23". I either use the dual-screen between the two, or I close the lid on the MBP, let it go to sleep, then wake it back up with a BT keyboard or mouse, letting it go to a single-screen mode on only the 23" Cinema Display.
So, I'm trying to use my external Firewire iSight with my MBP, and I'm getting mixed results -- the best of which is where I am getting some video with regular, occasional freezes with the picture being split (like a v-hold problem on an old TV). After a pause it goes back to smooth video.
I guess primarily, I'm wanting to know what the world of two iSights (FW and built-in) look like, and can they work together? I cannot for the life of me get this FW iSight to work consistently, but I know it works perfectly in another G5 tower (which has no built-in camera).
Any suggestions or guidance?

Hello Exivus
... two iSights (FW and built-in) ... can they work together?
You can have two iSights connected at one time, but, as explained in Apple's iSight "Your camera is in use by another application" message, iSight can be used by only one application at a time. (my emphasis)
Different apps select between multiple connected cameras in different ways. For instance, iChat > Preferences... > Video settings can select which camera to use with the iChat app, but iMovie 6 uses a drop-down menu as shown in this picture:
The suggestions in How to Troubleshoot iSight should help you determine whether one of your iSights is causing trouble. I suggest you test each one separately and without your external display or other peripherals to rule out possible conflicts.
After you are certain that your iSights are working individually, test them when both are connected. After your system successfully passes these tests, you can add your external devices back one-by-one to be sure one of them is not causing the problem.
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.1) External iSight

Using External iSight with MacBook Pro / iMac.

Posted in both forums.
Internal iSight is great, but the external iSight offers so much more flexability, and been able to position the camera where you want it is much better than tilting the screen and moving the computer.
So can you use external camera's with the MacBook Pro's and iMac's?
*nathan

Great! Thats awesome.
Have you tried it? If so, does the Mac automaticlly switch to the external iSight, or do you get an option to choose between internal and external.
Thanks,
*nathan

Using external iSight with MacBook Pro crashes iChat

I use my Macbook Pro in clamshell mode with an external display. I bought an external iSight so that I could use iChat AV. I have the appropriate adapter to convert the Firewire 400 cable to Firewire 800 which is compatible with my '09 MBP 17" (2.8GHz).
Every time I connect the iSight, iChat will launch, and then will crash (SPWoD). I can not recover unless I disconnect the iSight, at which point iChat is able to fully launch.
I tired changing both iChat and Photobooth to 32-bit mode (hint from another thread), but that did not help.
As a test, I connected the iSight to an iMac with both FW400 and FW800 and the iSight works perfectly with either connection. iChat AV then allows me to then select which camera I want to use in its preferences.
Both my Macbook Pro and the iMac are on OS X 10.6.2. iChat crashes regardless of if I am using the MacBook Pro in clamshell mode or not.
TIA.

bryanus wrote:
Sorry, I answered with my iPod tough. I guess it didn't translate the way I wanted it to.
Here are my answers ...
Thanks for that info, bryanus
Between this info and your latest response to Ralph, there are so many possibilities that I cannot yet identify the source of your problem. More troubleshooting is needed to identify the cause so we know what to fix.
Your used iSight may be causing the problem. Because it is easiest to troubleshoot, I suggest you test the external iSight next. The following will either eliminate your external iSight as the cause of your problem or let you know whether it will require professional service.
If the testing I suggest below shows that the problem is related to iChat ONLY, stop the testing I suggest and follow Ralph's expert suggestions for troubleshooting and correcting iChat.
Don't worry about the "clamshell mode" issues at this time. Until you get your external iSight working reliably with your MBP, keep the external display disconnected.
Additionally, to eliminate possible network problems as a contributor to your problem, when testing (internet) connected apps like iChat, use the same ethernet connection when you test both Macs. Even use the same ethernet cable (no wireless) connection to all Macs.
Also, to test problems with launching iChat, _disconnect both Macs from the network_ to see if iChat will launch properly with a connected external iSight but no internet or network connection.
You have already done some excellent testing, but you can use the additional suggestions from the following link (including other subject links on that page) to test the remaining user-correctable possibilities:
http://www.ralphjohns.co.uk/EZJim/EZJimpage4.html
Pay particular attention to *possible conflicts*, testing with more than one cable and/or adapter, and testing the external iSight on more than one Mac. If possible, it would be also good to use your same cable and FW Adapter to test your MBP's function with a different and known-good external iSight. If you have no other access to a working external iSight, your local Apple-Authorized Service Provider may be have one that he can use to check your MBP connection.
If your external iSight can connect reliably to other Macs, or if a different, known-working, external iSight also gives trouble on your MBP, the problem must be either in your MBP's physical Firewire connection port or in the software on your MBP.
Unless you find a fix while trying the above, we can offer suggestions for the particular problem(s) you identify based on your troubleshooting, so give as much detail as you can about your findings when you post back.
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

ISight on MacBook Pro works intermittently

So last week I was Skyping with someone and all of a sudden my iSight stops working. I switched over to Photo Booth to see if it was working and Photo Booth told me "There is no camera connected". I grabbed a screen capture(to show the Apple technicians what I was experiencing, if I can't resolve the problem on my own). I checked the system profiler and it didn't show up in the USB hardware device section. I then restarted the programs that use the iSight camera(Skype and Photo Booth) and everything was fine. I've since experienced the problem twice and have reset the SMC(experienced before and after the reset). I still have Apple Care for a few months, but was curious if someone had another suggestion for a permanent fix. My I/O board and logic board have both been replaced in the last 6 months.
So... What should I do?

For any iSight problems, first try restarting the Mac. If the problems persist, try all relevant suggestions from:
http://support.apple.com/kb/HT2090
If your iSight problem still occurs in more than one app and more than one user account, the reset suggested there often restores proper function of inbuilt iSight.
However, if your built-in iSight still does not work after carefully following all the suggestions in the "How to Troubleshoot iSight" article, and if iSight does not show as a USB hardware device in your Mac's System Profiler utility, yours is most likely a hardware problem. In that case, contact Apple or an Apple-Authorized Service Provider for service.
If your problem only returns when you try Skype, consider http://tinyurl.com/2bs3tk4
If you have ever used CamCamX, check for the CamCamX5.component file and delete it if you find it.
Message was edited by: EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.4); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.4)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod touch 4.1

Isight on macbook pro 15' was freeze

I just wonder? how come the isight built in was freeze on macbook pro 15' when we play with ichat?
We've try already to format the HD and put a new system on it but the symptom still persist. Try already upgrade it with a higher OS X upgrade but same story. reset nvram, reset pmu but still the symptom persist?
Thought this problem appear not because software issue, more to hardware issue. Is it the problem with the camera that build in display bezel/part of it.
Please sharing and advise us if you have same story or how to fix it?
thanks for your time:)
Razak.

Hi Abdul,
When you go to the Blue Apple icon and About This Mac and then the More Info button - does the Camra show up in the USB listings ?
Also check in your Hard Drive > System/Libray/Extensions for Apple_iSight.kext. Is this file there ?
8:50 PM Wednesday; October 18, 2006

Problems with iSight on MacBook Pro

When I open my Photo Booth application after awhile of using my MacBook Pro, the iSight doesn't work. When I reboot it seems to work again, then after awhile it doesn't work. All I see is a black screen with a camcorder icon with a slash through it.

http://docs.info.apple.com/article.html?artnum=93240

Isight In Macbook Dead???

Similar Messages

Maybe you are looking for