Isight is used by another app. !!! it's AIM

Ok L & G, not sure if this is the issue but i think the very common message that a lot of people are getting that some other app is using the Isight and we can't use is because (in my poor opinion) ICHAT i linked to AIM, by means that, when you log in to ICHAT which normally automatically, you are also logged in to AIM at the same time which makes Isight logged too in two different locations at the same time, i'm getting a message from AIM that i'm logged in in 2 different locations and if i need to log out from one of them i need to reply to that message by 1 then send !! this is replying to AIM. can some one out there please confirm what i said?! i might be high !!

If you're logged into AIM via iChat, it doesn't necessarily mean your iSight is in use. Also, connecting to AIM with iChat isn't really two different applications/locations.
When AIM says you're logged in from two locations that has nothing to do with your iSight. For example, you sign on your screen name at work and don't sign out (assuming your connection is still active) - you come home and sign in the same screen name - you're signed in from two locations and you'll get that notification. It's also possible to still be signed in from an earlier session if AIM/iChat/Adium/any IM app crashed.

Similar Messages

ISight Makes a SLOWER "Turn On" Sound Then "Used by Another App Message"

I've had my iSight cam for about 4 years. When I plugged it in a couple of days ago, that quick sound it makes when it's connected (focusing sound?) was much slower. I then received the message that it is in use by another app.
I do regular maintenance (permissions, clean caches, check pref files). I've tried another user account. I've unplugged everything and shut the computer off for at least 15 minutes. I've tried another firewire port. I'm going to reinstall the 10.4.10 combo PPC update.
Has anyone else encountered the slow "turn on" sound to find that their iSight no longer works?
Im afraid I'm going to have to send it away, pay $150, and get it repair. I guess that's better than paying $350 for a new one.
Thanks.

Hello PDXKevin
Has anyone else encountered the slow "turn on" sound to find that their iSight no longer works?
Not I.
I know you did not ask, but you may want to consider any of the following that you have not already tried before you have your iSight serviced.
If you have changed anything recently, have you considered Possible hardware or software conflicts.
I see you have previously posted about problems with your Firewire. Does your iSight show as a Firewire device in your System Profiler? Do other Firewire devices work when connected to the same port on your PowerBook?
If your iSight works when connected to a different Mac but you do not see iSight in System Profiler when your iSight is connected to your PowerBook, you may have connection, cable, Firewire, or other problems with your Mac. In this case, try Apple's suggestions in What to do if your computer won't recognize a FireWire device.
Jim
15" PowerBook 1.67 GHz Mac OS X (10.4.10) G5 DP 1.8 External iSight

Cant disconnect iPod. Files used by another app.

iTunes will not let me disconnect my iPod because it says files on my iPod are being used by another app. I have my iPod set up to update manually because I have a few different music files on my iPod then in my iTunes music library and I dont want them deleted. Right now the only way I can easily disconnect the iPod is by the icon in the windows toolbar. Or is that what the manual means when it says you have to disconnect the iPod manually when the iPod is set up to update manually. I confused >.< Please help!!!

Does this always happen when you connect your iPod? If not, and if you can disconnect your iPod by using the Remove Hardware icon in the toolbar, then it should be no big deal. Don't worry too much.
Occasionally I also encounter this after I copied songs to my iPods. I don't know why but since I was able to disconnect using the Remove Hardware icon I do not worry about it and so far I have no reason to be worried. I use manual update as you do.

Suddenly iPhoto gives me the error message "your photo library is either in use by another app or has become unreadable". HELP

Suddenly iphoto gives me error message 'your photo library is either in use by another app or has become unreadable'. What can I do?

What version of iPhoto? Assuming 09 or later...
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Restore time machine fails - files in use by another app

Situation: I am trying to get my files off my broken LaCie external drive(no longer mounts, unable to be fixed in Disk Utility) .
This is what I did:
a. I select all the files in Time machine.
b. I click restore, they "come forward".
c. A window comes up saying "blank" (meaning the first file in the list) cannot be opened because it is in use by another app.
d. I tried selecting just one file vice all the files, same thing.
It is a major tease that I can see the files, but are they just ghosts?!
Additional info: I am scanning with Disk Drill for the last hour, NOTHING found on the drive. How could almost 350gb of files disappear? Now it says no recoverable data found.
Disk Utility lists the drive, but it is greyed out and therefore unable to be fixed in any way).
Also, Disk Warrior also says the disk is in use (by what?), and cannot continue to rebuild the drive. Error codes given: 2153 and 4903.
I do believe I am hosed.
Thanks

I'm staring to suspect that it might be some underlying library that firefox uses that's caused it. I just tried 3.0.12 and that's behaving bizzarley too.
With that I get some console output at least, not sure if it's much help.
(firefox-bin:2368): Gdk-CRITICAL **: gdk_x11_xatom_to_atom_for_display: assertion `xatom != None' failed
(firefox-bin:2368): Gdk-CRITICAL **: gdk_x11_xatom_to_atom_for_display: assertion `xatom != None' failed
(firefox-bin:2368): Gdk-CRITICAL **: gdk_x11_xatom_to_atom_for_display: assertion `xatom != None' failed

"Camera in use by another app" message in iChat on Lion?

Ever since I installed Lion, when I try to initiate a video iChat, it tells me that my camera is being used by another app. In fact, it isn't. Restarting iChat fixes the problem, but I have to restart it EVERY TIME I want to initiate or receive a video chat. When it's behaving like this, the other person receives a message that I'm in another chat.
Suggestions?

HI,
SMC/PMU reset.
10:27 PM Wednesday; April 25, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Ichat says my iSight is in use by another app

Hello, I just got my iSight that I bought on ebay.
I have a problem, iChat is saying my camera is in use by another application, but I'm not using it with any other app. I also tried to use it with quicktime pro, and when I went to file, new recording I got the same message.
Can anyone give me some help with this?
Thanks

Hello WishboneJG
Because your iSight is newly purchased, you may want to contact the eBay seller for help suggestions or to preserve your return or exchange rights. If your iSight's seller does not help you resolve your problem, try the following suggestions one-by-one until you find the one that works for you.
(0) Disconnect any unnecessary peripherals while you do your testing to rule out possible conflicts.
(1) Restart your Mac. Sometimes that is all that is required. If you can get the iSight recognized, you can use these suggestions to test your iSight to ensure it is functional.
(2) If you use an HP printer/scanner with your Mac, consider the "daemon" suggestions from user "parkersal" in this post.
(3) Check for any running applications, Login Items, or widgets that can use your iSight. (It is easy to forget widgets like Mirror in your Dashboard.) As explained in Apple's iSight "Your camera is in use by another application" message, iSight can be used by one application at a time.
(4) Try every suggestion re: Standalone iSight in How to Troubleshoot iSight. Also try the checks for whether the problem is "application-specific" and "user-specific" as explained in the built-in iSight troubleshooting suggestions on that page.
In addition to testing with QuickTime Pro, also try iChat, iMovie, or some of the other Applications You Can Use With iSight to test whether your problem is "application-specific".
Click here if you need help creating a new user account to check whether your problem is "user-specific" during Troubleshooting.
(5) If none of the suggestions above correct your problem, try the following:
- Backup your Home Folder, or at very least, your important files.
- Repair permissions. (Click here if you need help)
- Then download and apply the Mac OS X 10.4.10 Combo Update (PPC).
- Finish with another Permissions Repair, and then check your iSight again.
Users have reported fixes to a variety of audio, video, connectivity, and software conflicts and unreliability issues after properly applying Combo Updates.
(7) If none of these suggestions help, I suggest that you contact Apple or your Apple-Authorized Service Provider for a professional check. If you do not have local access to Apple Service, see Apple's iSight Service: Frequently Asked Questions.
EZ Jim
PowerBook 1.67 GHz Mac OS X (10.4.10) G5 DP 1.8 External iSight

Camera in use with another app. BUT IT ISN"T

Wonder if anyone has got this problem. I installed Tiger and made all the updates. Since doing that my ichat keeps telling me my camera is in use with another application and asks me to quit it before I can use it with iChat.
As I only have iChat open at the time (& finder of course) then there is nothing to quite and I can't get iChat to recognize the camera. its a panasonic 3CCD and worked perfectly with Panther.
Any suggestions please

I used to have this happen, but not recently. I still don't know the cause, but have found an answer that works most of the time for me, and a few others I V-C with.
Close all apps that can involve a webcam. Disconnect the FW cable from either your camera or the Mac, momentarily, then reconnect it. That should launch iChat, and have the camera again recognized by iChat as available.
Not very elegant, but works most of the time for me.
My iSight use to have mic problems in Panther. Often after the first launch of iChat, the mic wouldn't function. Unplugging the FW cable would cure that as well. This has not happened in Tiger.

Camera being used by another app?

Hey out there,
I've got a powerpc G5 w/built in isight & I'm getting the "your camera is being used by another application" error. I've seen other posts regarding this, but they all seem to be with older macs & external cameras. Any ideas, reload QT?
Thanks
iMac G5 2.1 Ghz isight refurb 1.5 gb ram iMac G4 800 mhz Mac OS X (10.4.4)

Hi,
If you mean here
http://www.mvldesign.com/videoconferencetutorial.html
That is not my page.
Mine is here http://www.ralphjohnsuk.dsl.pipex.com/ and does not have any Pic request stuff.
9:19 PM Thursday; January 4, 2007
To All but no-one in particular.
Please mark your question as Solved or Answered
Mark any posts that have aided you with the tag.
And the post that provided your answer with the tag.

Photo Booth iSight "in use by another application" - possible fix!!!

Hi everyone.
I'm running Mac OSX 10.4.10 and a few days ago I developed the problem of the inbuilt iSight camera in my new 20" iMac failing to work with Photo Booth, iChat etc. I kept getting the dreaded message "in use by another application".
After trying various fixes and tips from elsewhere I finally came upon a website which had a hint saying you could disable the iSight camera by moving the "QuickTimeUSBVDCDIgitizer.component" file from the System/Library/Quicktime folder.
Even though this wasn't related to my problem I checked to see if I had the file and realised it wasn't there! So I downloaded it from another source, popped it in the folder mentioned above, and hey-presto! My iSight is now working again. I have no idea why the file was missing originally.
If anyone else has had this problem please check this out, it may just work for you too!

You can get it here. http://techslaves.org/index.php?page=17 It is in the first part of the page there are two links.

Camera used by another app

I'm with 10.2.8 and I get "camera used by another application" when I launch ichatAV 2.0. The green light on top of camera comes on for 2-3 sec, and goes off.
Then I click the iChat pref>video tab and microphone is= isight bulit in; sound output = digital out ( funny... here is missing my external speakers) bandwidth =100kpbs.
and the camera does not turn on. It used to a few months ago. (I did not use it for a while)
Also,
do the 2 parties have to be on say a .aim account or .mac account to be able to video chat together? Can a .aim account chat with a .mac account?
any help would be appreciated!
michel

Michel,
No need to double post.
(For the info of those new to Discussions: Multiple posting makes it more difficult for us to help, harder for you to integrate multiple responses, and slows down Apple Discussions GREAT Search capabilities.)
My response is at your other thread on this problem:
"camera used by another application ??"

IPod cannot be updated/restored/ejected--files in use by another app

Since I downloaded iTunes7, I cannot update, restore, or eject my iPod from iTunes. I get the error "<iPod name> cannot be updated(restored, ejected) because it contains files in use by another application." I'm still able to sync music and tv shows with the old iPod software, but not movies. I eject it using the Safely Remove Hardware icon in my system tray, or from My Computer. I've tried disabling security programs and peripherals, and even sifting through the processes in Task Manager. I had no trouble ejecting prior to iTunes 7/7.0.1.
And yes, I've done the R's I'm able to do (Restore is not an option due to the nature of the error).

Hi again, Corey!
In regard to "recovery mode" message, you'll most likely just need to restore your iPod. For more details, read here -> Restoring your iPod
If this message persists after restoring your iPod, try assigning your iPod a different drive letter; see these steps below:
Log off of any other users on your computer.
1 - Don’t plug in your iPod yet.
2 - Go to "START -> Control Panel -> Admin Tools (if you don't see this, click on "classic view" button on the left panel) -> Computer Management."
3 - Click on the "Disk Management" button in the left panel area.
4 - Now, with "Computer Management" and Control Panel windows opened, reset your iPod, and connect it.
5 - Right-click on your iPod's listing there (after a few moments when it gets recognized in this drive window), and click on "Change Drive letter and Paths". Then the "Change..." button.
Here's what it should look like:
Assign your iPod the letter "M" "N", "O" or the like (further along in the alphabet).
For more details, see this article:
Windows confuses iPod with network device / Changing drive letter
I hope this helps you!
-Kylene
If any post helps or solves your issue, please mark it that way accordingly. Thank you for helping the boards!

Now I've got the 'iSight in use by another application' issue. :-(

There are plenty of other threads on this, I know, and I reckon I've read most of them by now. Why does this suddenly happen? I do not have any other applications running. I have tried to make iSight work in all the applications on my Mac that can use it:
iMovie 6
Comic Life 1.4.1
Photo Booth
iChat
But all of them make the same complaint. What is the ultimate solution for fixing this? It worked fine the last time I tried it, a few weeks ago.
Has anybody here had this problem and fixed it - if so, exactly what did you do?

"I know, and I reckon *I've read most of them by now."*
"Has anybody here had this problem and fixed it - if so, exactly what did you do? "
If you mean that you have tried all the troubleshooting suggestions mentioned in this forum, then I suggest that you contact Apple. Hopefully, you have AppleCare. If so, you can also check out the Chat with a Support Agent. The online chat support is available 24 hours a day, 7 days a week.

IPhoto is in use by other app or unreadable

I have my iPhoto app and the library on an external HD. I got an error saying that the disk was improperly ejected( I didn't do anything) When I tried to re-open the app I get the message that my photo library is either in use by another app or has become unreadable. I have tried all the options it gives me yet nothing has made it work again. Any idea as to what is going on?

Not being mine readers it would help if you told us what "all the options it gives me" are
Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library
LN

Flash thinks that my isight is in use by another program -- when its not.

When a flash page calls my webcam for use (like Yahoo Live), I get the following error: "Camera is unavailable, may be in use by another application." I've checked, and nothing else is using the camera.
I went into the system and found out that the webcam is controlled by the following component.
System > Library > Quicktime > QuickTimeComponents.component
When I remove the component from the above location, Flash says that there is no webcam. When I put it back, I get the error message stated above.
Now, I didnt always have this problem... Yahoo Live used to work great, but then I installed Skype, and now it wont work... I then uninstalled Skype, removed it from my login items and everything, but still, Yahoo Live wont work. I then tried the something on my Macbook, and the same thing.
Does anyone know whats going on here?
Both my iMac and Macbook running Leopard have this same issue.
Im thinking that the above quicktime component is messed up and needs to be replaced with the original one.. What do you all think?
Thanks,
Brandon

Hello Brandon
You can use the suggestions in Apple's How to Troubleshoot iSight to help find the source of your problem and perhaps eliminate iSight as a contributor.
Unless your problem is with iSight itself, your troubleshooting may lead you to the root cause.
Try some other Flash-based video website to determine whether your problem is only with Yahoo or some system component.
Have you tried to configure your "Flash" settings as described here?
http://discussions.apple.com/thread.jspa?messageID=4761707&#4761707
If you cannot even get to the Flash settings window, you may have damaged software. Try the following:
• Backup your Home Folder, or at very least, your important files.
• Repair permissions. (Click here if you need help.)
• Then download and apply the Mac OS X 10.5.2 Combo Update.
• Finish with another Permissions Repair, and then check your iSight again.
Users have reported fixes to a variety of audio, video, connectivity, and software conflicts and unreliability issues after properly applying Combo Updates.
Try a different browser (Firefox, Camino, etc.) to see if your problem might be in Safari.
Have you tried reinstalling QuickTime? Repair permissions before installing QT and again after the restart that finishes the QT update.
If you still believe that the problem is QuickTime related, you might get better help by searching or posting in QuickTime Discussions.
Beyond that, I would suggest that you reinstall all of your Mac's software and see if everything works before you add any third-party apps or peripherals.
Please let us know what you find.
Cheers,
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.2) External iSight

Isight is used by another app. !!! it's AIM

Similar Messages

Maybe you are looking for