ISight not showing up in System Profiler

I have tried SMC reset, safeboot, and many other things to try to get iSight to work with my Macbook Pro. It does not show up in the System Profiler. Any ideas?

teddybest wrote:
I have tried ... does not show up in the System Profiler. Any ideas?
Then you most likely have a hardware problem. See your Apple Service Technician for help.
As suggested in http://support.apple.com/kb/HT2090 :
If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
EZ Jim
G5 DP 1.8GHz w/Mac OS X (10.5.7) PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Similar Messages

Isight not working & found in system profiler after efi firmware upd 1.17f0

hi there,
i got a brand new macbook core 2 duo to my birthday yesterday.
the isight worked when setting up my user account right in the beginning. right after that i downloaded all system updates including the efi firmware update 1.17f0 which is version 1.1, basically, i wanted to play with photobooth. it said that the camera is used by another application. then i checked the system profiler (section usb), but it's not there. i tried to install skype which didn't find the camera at all. also changing my user-photo in my user-account-setup in system preferences didn't work because 'there is no camera connected'.
i even formatted the drive and reinstalled os x again. i'm quite sure it's the firmware update that is causing the problems.
repairing permission, resetting PRAM and SMC didn't work neither.
heeelp!
best,
nikki.

See if you have this file QuickTimeUSBVDCDIgitizer.component in the System/Library/Quicktime folder. If it is missing you can get a copy of the file here. http://techslaves.org/index.php?page=17 There are two links in the first part. Either one works I just tested them. Some others have complained that this missing file caused their problem and putting it back fixed it.

Applications not showing up in System Profiler?

Anyone know why? All it says is "no information found" and hitting "refresh" makes no difference.
Could it be somehow it uses spotlight to find the applications?
It shows up the same blank page whether I boot into 64 or 32 bit.
Thanks!

Applications still not showing up. I also tried a safe boot; no go. The safe boot did solve another issue I was having; my security panel in system preferences would not open. After it did in safe boot, it opens in my main administrator account.
But no go on the applications in sys profiler. However, I did install the same 10.6.5 on another internal drive with all updates, and THAT boot WILL show me all my applications, including all the ones on two parallels windows versions (XP and 7) and my bootcamp windows drive, so if I need a list, I'll do that.
I'm guessing probably a symbolic link to the applications folder is amiss or possibly system profiler preferences.
But don't know how to futz with those.
Thanks.
P.S. OK, I do know how to futz with the sysprofiler plist. Not the problem. Did the usual... dragged it to the trash, opened up system profiler, it created a new plist, STILL no applications showing up.
I haven't moved my applications nor anything in my home folder nor changed my name or anything. Just really strange.

Upgrading RAM cards not showing up in system profiler... is this normal?

Just replaced both 1GB RAM cards in my macbook pro with two 2GB RAM cards, but when I go into "about my mac" it is still saying that I only have 2GB of memory, and when I go into system profiler and click "memory" it is still showing/giving details on two 1GB cards, is this normal or did I not install the new RAM cards properly? I assumed it would update the info to show the additional memory?

This is not normal
Open up the Mac and reseat the RAM modules. This may help.
If this doesn't resolve the issue, return the modules to the supplier and get the proper modules.
Best.

Serial number not showing up in system profiler

hi,
i recently had a problem with my speakers in macbook.
i sent it for service and the service center replaced my main board
now the system profiler is not showing my serial number.
do any one know how to fix this problem.

You would need to send it back to have the serial number burned in to the board. This seems to be a common occurrence when the board is replaced. There should be a number you can call on the paperwork from the repair and discuss it with them.

Hardware Overview not showing up in System Profiler

Yep...Not showing up...I hit about this mac, more info and it's not there....
where is it? I opened System Profile, package contents, etc. but don't see where it could be.
Thanks.
http://c.imagehost.org/0265/sp.png

alright, still havent figured this out. can anyone direct me to a link where i can download system profiler? tried to extract it using pacifist but that doesnt work as it's blacked out.

CPU not showing up in System Profiler

Hi,
I have a 4 year old Dual 2.5 GHz G5 which I think has had a CPU failure (B CPU). The system profiler states that I only have one, not two CPU's.
Is it a case of using a repair CD to reset the lost CPU or is it dead?
Any ideas anyone?
Thanks in advance for your help.
Regards
Dean

Hi Dean,
Ouch... Well I've gathered up a few alternative solutions, though you might want to give an Apple Authorized Repairer a call for an estimate: http://www.apple.com/buy/locator/service/
Here are some links to wade through if you'd like to get a replacement. The first is way over priced, that store always is, but it does show the part is out there:
http://www.welovemacs.com/appomacg5du255.html
I had a good experience with this place once awhile back:
http://www.dvwarehouse.com/Power-Mac-G5-Processor-c-2532381434.html
And this link provides even more links:
http://lowendmac.com/dealers/service.shtml
Good luck with whatever you decide to do.

Inbuilt isight camera is detected in system profiler but no image is being detected only a black screen shows up. I have tried all of the troubleshooting instructions and it still wont work. The iMac im using is OS X 10.6 and was an ex-floor model

inbuilt isight camera is detected in system profiler but no image is being detected only a black screen shows up. I have tried all of the troubleshooting instructions and it still wont work. The iMac im using is OS X 10.6 and was an ex-floor model

Hi,
I would try a Safe Boot first. (This will take longer than a normal Boot and you will need to Restart afterwards).
If it were an older OS I would also suggest going to System Preferences > Displays and making sure the display is set to Millions. (My MacBook Pro does not have this option in Snow Leopard so I did presume Snow Leopard does not have it).
With some laptops there have been some issues with the cable up the back of the screen pulling loose with regular and frequent use of the lid, but this will not apply to you based on your specs. (it does take time to appear and is also somewhat rare). However it seems enough contact with the camera can make it appear in System Profiler and power it on but not give a pic.
If a Safe Boot does not work I would also try a PRAM reset.
Shut down the computer.
Restart it holding down Apple/CMD (or ⌘)+ALT( ⌥)+P+R Keys until you have heard three Start Up Bongs.
This is actually "less" destructive in that it clears less memory items than Safe Boot but they are different enough to warrant trying.
Do you have an older version of iGlasses installed ?
The one for Leopard does not work for Snow Leopard.
Do you have Web Browser open ?
This may point to Google Video Chat Plug-in and Flash Conflict. It would be rare to allow another app to access the camera even if not displayiong a Pic.
(Chrome Installs the Plug-in as does the standalone download).
Knowing what "any application" exactly you are trying might help us pin it down.
Any additional downloaded apps that can use the camera ?
Do you happen to have something balck in front of the camera ?
8:20 PM Sunday; October 9, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

LaCie flash drive not recognized as a drive, but shows up in system profiler. Please help!!

I recently got a LaCie RuggedKey 16 gb flash drive. The problem is that recently I plugged in the drive and I can't access the files, however, it shows up in system profiler. There are still files on the drive, and I really need them. Can you please help me recover them?

If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
If you're connecting it directly, try a different port.
Disconnect all other devices on the bus, or as many as possible.
Test the drive with another Mac. Test another drive with this Mac.
Boot into Recovery and launch Disk Utility. Is the drive recognized?
Start up in Safe Mode and test.
Reset the NVRAM.
Reset the System Management Controller.
If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive has failed.

In solution manager system not showing all the system in SLD

Dear Gurus,
During the installation of solution manger sysyem i selected as a Central SLD as solution manager
Later installed ECC 6.0 and EP systems selected SLD as solution manager system during the instllation.
If i login in to http://hostname:50000/sld (solution manger system) and the screen also not showing all the options also. some options missing in the tab. Wat I need to do to see all the options clearly.
It is not showing all the systems if i check in EP and ECC for SLDCHECK it is not givng any errror.
But if i login into solution manger not able to see all the system in SLD.
Regards

Thanks for reply
it is not showing all the systems

New Hard disk is not appearing in the System Profiler

I am doing a fresh install using my ligitimate Snow Leopard DVD on my USB disk.
My SSD is not appearing in the System Profiler under Hardware>ATA
or under Hardware>Serial-ATA
It is a PATA device as was the original disk I've replaced.
So I have NO disk to install onto.
Any ideas what the problem could be?
===
History
My hard disk died, and I am replacing it with an SSD.
I bought a Mach Xtreme Technology Pata 1.8" SSD (Part no MXSSD1MNANOZ-120G)
(I can send this back if I have to)
The SSD is unusual in that it has to be a 1.8" size with a ZIF PATA connector.
The SSD is preformatted (but not necessarily to Apple formatting).
With the SSD the same way around to the original 80GB HDD, Pin 1 of the new SSD is towards the back of the computer.
I cannot find any information as to which Pin on the original HDD is Pin 1.
I used this tutorial to dismantle and reassemble: http://www.youtube.com/watch?v=PnV7mHS7Qi8
I've double checked the connections inside.

Thanks, this was the answer.
The connector on the SSD I used was indeed arranged reverse to the original Apple Drive. So it looked different to all the tutorials.
I knew where Pin 1 was on the new SSD but could not see it on the old drive.
The original 80GB hard disk had Pin 1 is towards the middle of the computer.
Flipping the SSD over meant it was about 3mm closer to the back, which made the zif ribbon buckle. So I had to cut away some of the rubber shock absorber to the back, and use tape. The SSD should not need the shock absorber as it is not mechanical/vibrating.
It is now working well.
(Although I now have a different problem restoring from the Time Machine. )

Why does Windows 7 not show up in System Preference's "Startup Disk"

Why does Windows 7, installed via Boot Camp, show up when you hold down the option key when booting but the drive does not show up in System Preferences under the Startup Disk icon.
As an aside Windows 7 runs perfectly on my MacBook.
- Mike

Now I found I'm not alone. My situation is similar but not exactly the same.
I recently switched from the white MacBook to latest mac mini, tried installing XP Pro not successful for some reasons then tried Win7 (build 7000). On my old macbook this worked perfectly.
Got win7 updated and picked win7 as startup disk in windows, used that for few days without going back to leopard. On just one occasion I booted with 'alt' key pressed (using a PC keyboard) I have choices of drives so I thought everything was fine. As soon as I booted into leopard I found no win7 partition in system>preference>startup disk, OMG I couldn't boot back to win7 since then. From that point onwards the 'alt' key didn't work for me. Every time only leopard can be booted.
What can I do now?
Why it was OK in macbook but didn't work on mini? Is it worth investing on a mac external keyboard just to get the 'option' key?

New Superdrive doesn't show up in System Profiler

My old superdrive died on me, so I ordered a new one from powerbookmedic.com.
After installing, it doesn't show up in System Profiler. I've quadruple-checked the connection and I can hear it make regular healthy sounds when booting up so I know it's getting power but once I'm inside OSX; nothing.
I tried resetting the PRAM and SCM as recommended on this forum for various superdrive trouble. Although it didn't change anything and I'm guessing don't apply here.
Any tips for getting OSX to recognize my drive?

It's equipped with a SATA drive - that's why.
Just take a look further down ..
Printers
SAS
Serial-ATA <--
USB

Hard Drive Shows Up In System Profile, But Not On Desktop

I took the old hard drive out of my intel mac mini (60gb fuji) and installed it on my power mac g5 (1.8 single); it worked long enough for me to copy all my old files over before it randomly froze and i had to restart. after that the new drive only shows up in the system profiler and not on the desktop. in the system profiler it states its capacity but not how much is available, like the main drive. any ideas on how to get the old drive working again?

figured it out, thanks!

IPod shows up in system profiler but not in /dev and disk utility

Hi,
I have a Problem with my iPod. It works perfectly when I connect it to other macs.
Though on my mac it appears only in the system profiler, but not in itunes, /dev or diskutilities. Other USB devices are working correctly.
I already reseted my ipod but this doesn't solve the problem. Neither did the update of the iPod firmware.
Does somebody know this Problem? What can I try to solve it?
Thanks.
About my iPod:
It's an iPod Touch, system Profiler is telling:
Version:          0.01
Bus Power (mA):          500
Speed:          Up to 480 Mb/sec
Manufacturer:          Apple Inc.
Product ID:          0x1293
Serial Number:
Vendor ID:          0x05ac (Apple Computer, Inc.)
iTunes says:
serial number: 910952nua75j
Running the system 4.2.1
About my Mac:
It's a MacBook Pro, 2,16 GHz Intel Core 2 Duo, running 10.4.11

I'm pretty upset. It seems that the only solution to this problem is to buy some new mac products!
I have Applications on my computer that will not work on a new system and I don't want to update my system + all expensive apps just because my ipod refuse to downgrade.
I used to be a mac fan and I still like it, but this kind of "tricks" are unacceptable. I bought an ipod because I didn't want to spend time on fixing some stupid problems and now I already spent weeks trying to make my expensive ipod work on my mac (and all this because of a stupid firmware problem). I am now really disapointed.
So if anyone should have an idea on if it's possible to downgrade my ipod (or other solution?) in order to make it work again with my system, please post it here. Thanks.

ISight not showing up in System Profiler

Similar Messages

Maybe you are looking for